Copiator Konica Minolta EP 1054

Using the Copier Properly .............................................................. X-1What is an Energy Star Copier ?.................................................... X-3EP1054 .......................................................................................... X-4CE Marking (Declaration of Conformity) ........................................ X-4Terms and Symbols for the Type of Originals and Copy Paper..... X-5Feeding Direction (copy paper path).............................................. X-5“Width” and “Length” ...................................................................... X-5Terms and Symbols Used.............................................................. X-6

1 Safety Notes1.1 Installing the Copier......................................................................1-1

Installation Site................................................................................1-1Power Source..................................................................................1-1Grounding .......................................................................................1-2Space Requirements.......................................................................1-2

1.2 Precautions for Use ......................................................................1-3Operating Environment ...................................................................1-3Using the Copier Properly ...............................................................1-3Care of Copier Supplies ..................................................................1-4Moving.............................................................................................1-4Legal Restrictions on Copying ........................................................1-5Financial Instruments ......................................................................1-5Legal Documents ............................................................................1-5General ...........................................................................................1-5

2 Getting to Know Your Copier2.1 System Overview ..........................................................................2-1

Multi Bypass Tray MB-4 <Option> ..................................................2-1EP1054 ...........................................................................................2-1

2.2 Copier Parts and Accessories .....................................................2-2Outside Copier ................................................................................2-2Inside Copier ...................................................................................2-3Multi Bypass Tray MB-4 ..................................................................2-5

Table of Contents

EP1054

2.3 Control Panel Keys and Indicators ............................................. 2-6Control Panel.................................................................................. 2-6Display............................................................................................ 2-8Monitor Display............................................................................... 2-8Paper Information Display .............................................................. 2-9Zoom Ratio Indicator / Multi-Copy Display ..................................... 2-9Exposure Information Display....................................................... 2-10

2.4 Turning ON and OFF, and Resetting the Copier...................... 2-11Turning ON and OFF.................................................................... 2-11When the Copier is Turned ON .................................................... 2-11Minimizing the Warm-up Time...................................................... 2-12Initial Mode and Panel Resetting.................................................. 2-13Auto Reset Function ..................................................................... 2-14

3 Making Copies3.1 Copying Overview ........................................................................ 3-1

3.2 Copying Procedure ...................................................................... 3-4Placing Originals............................................................................. 3-4Sheet Originals (Standard Size) ..................................................... 3-4Highly Transparent Originals .......................................................... 3-4Book Original .................................................................................. 3-5Checking the Copy Paper Size and Selecting the Paper Source... 3-6Selecting the Paper Source(Only when the Multi Bypass Tray is used) .................................... 3-6

3.3 Zoom Ratio.................................................................................... 3-7Fixed Zoom Ratios ......................................................................... 3-7Zoom Ratios ................................................................................... 3-7Selecting the Fixed Zoom Ratios.................................................... 3-7Setting a Zoom Ratio...................................................................... 3-8

3.4 Image Density ............................................................................... 3-9Types of Exposure Modes.............................................................. 3-9Selecting the Auto Exposure Mode .............................................. 3-10Selecting the Manual Exposure Mode.......................................... 3-10Selecting the Photo Mode ............................................................ 3-10

3.5 Book Copying ............................................................................. 3-11Selecting the Book Copying Mode ............................................... 3-11

3.6 Manual Bypass Copying ............................................................ 3-13Using the Manual Bypass Tray..................................................... 3-14Using the Multi Bypass Tray (Option)........................................... 3-14

EP1054

4 Auxiliary Functions4.1 Checking the Total Number of Copies Mode..............................4-1

Types of Counters...........................................................................4-1Counter Display...............................................................................4-1Using the Meter Count Function .....................................................4-2

4.2 Toner Replenisher Function (Increasing the Image Density) ...4-3

4.3 Drum Dehumidifier Function........................................................4-4

4.4 User’s Choice ................................................................................4-6Functions Available in User’s Choice..............................................4-6Description of Each User’s Choice Function...................................4-6Making the User’s Choice Mode Settings .....................................4-11

5 When an Indicator Lights Up5.1 Quick Reference for Indicator Lights ..........................................5-1

Warning Indicators ..........................................................................5-1

5.2 Detailed Instructions for Indicator Lights...................................5-2Add Toner Indicator.........................................................................5-2Replacing the Toner Bottle..............................................................5-2Add Paper Indicator ........................................................................5-4Adding Paper (Drawer) ...................................................................5-4Adding Paper (Multi Bypass Tray) ..................................................5-5Closure Failure Indicator .................................................................5-6Misfeed Indicator.............................................................................5-7Misfeed Clearing Procedure............................................................5-7Call-Tech.-Rep. Indicator ..............................................................5-10Resetting the Call-Tech.-Rep. Indicator ........................................5-10I.U. Service Life Indicator Lights Up..............................................5-11Precautions for Handling...............................................................5-12Removing the I. U. from the copier ...............................................5-13Unpacking the I. U.........................................................................5-14Setting up the I. U. ........................................................................5-14Charging the Copier with Starter and Toner .................................5-16

6 Troubleshooting6.1 When this Type of Copy is Produced..........................................6-1

6.2 The Copier is not functioning as designed ................................6-3

7 SpecificationsCopier EP1085................................................................................7-1Multi Bypass Tray MB-4 ..................................................................7-2

EP1054

8 Miscellaneous8.1 Care of the Copier ........................................................................ 8-1

Daily Checks................................................................................... 8-1Power Cord, Communications Cable, Ground Cable ..................... 8-1Original Glass ................................................................................. 8-1Original Cover, Automatic Document Feeder................................. 8-1Copy Paper..................................................................................... 8-2Sound of Copier Operation............................................................. 8-2Copier Housing Temperature ......................................................... 8-2Cleaning ......................................................................................... 8-2Housing .......................................................................................... 8-2Original Pad.................................................................................... 8-2Original Glass ................................................................................. 8-3Control Panel.................................................................................. 8-3Front Door ...................................................................................... 8-3Corona Units................................................................................... 8-4

8.2 Paper Size and Zoom Ratio Table............................................... 8-5Paper Size ...................................................................................... 8-5Zoom Ratio Table (Original Size to Copy Paper Size) ................... 8-6

EP1054

Using the Copier Properly

To ensure the optimum performance of the copier, follow the precautionslisted below.

� Never place a heavy object on the copier.

� Never subject the copier to shocks.

� Never open doors or turn the copier off while he is making copies.

� Never bring any magnetized object near the copier.

� Never use flammable sprays, liquids or gases near the copier.

� Never modify the copier, as a fire or electrical shock could result.

� Never remove any panel or cover which is secured. The copiercontains high voltage components which can cause electrical shock.

� Never tamper with the laser mechanism in laser-equipped models, asblindness or other injury may result.

� Never drop paper clips, staples or other small pieces of metal throughthe vents or other openings in the copier, as a fire or electrical shockcan result.

� Never place containers of liquid on the copier. If liquids get inside thecopier, they can cause fire or electrical shock. If a piece of metal or anyliquid gets inside the copier, immediately turn the copier off, unplug thepower cord and call your technical representative. A fire or electricalshock can result if the copier remains plugged in or is operated aftermetal or liquid gets inside.

� Never leave the copier running if it becomes unusually hot, or if smokeor an unusual odor or noise is detected. Should any of theseconditions occur, immediately turn the copier off, unplug the powercord and call your technical representative. A fire or electrical shockcan result if the copier remains plugged in under any of theseconditions.

� Always insert the power plug all the way into the outlet.

� Always make sure that the outlet is visible, clear of the copier or copiercabinet.

� Always provide good ventilation when making a large number ofcontinuous copies.

� Never pull on the power cord, and always hold the plug whenunplugging the power cord. A damaged cord could result in a fire orcause an electrical shock.

� Never unplug the power cord with a wet hand, as it could cause anelectrical shock.

� Always unplug the power cord before moving the copier. Moving thecopier with the power cord plugged in can damage the cord resultingin a fire or causing an electrical shock.

EP1054 X-1

� Always unplug the power cord when the copier is not going to be usedfor a long time.

� Never place a heavy object on the power cord, or pull or bend it, as afire or electrical shock can result.

� Always ensure that the copier does not sit on or move onto the powercord or communications cable of other electrical equipment, asmalfunctioning equipment or a fire could result.

� Always ensure that the power cord or communications cable of otherelectrical equipment does not become wedged into the copiermechanism, as malfunctioning equipment or a fire could result.

� Always use the correct power voltage, as improper voltage can causea fire or electrical shock.

� Never use a multiple outlet adapter, as a fire or electrical shock canresult.

� Should the power cord become damaged, immediately turn the copieroff, unplug the power cord and call your technical representative. Adamaged cord can result in a fire or cause an electric shock.

� If an extension cord is needed, use one with a greater rated capacitythan the maximum power requirements of the copier. The use of anextension cord that falls short of supporting the maximum powerrequirements can result in overheating or a fire

� Always unplug the copier whenever anything unusual is observedduring operation. Make sure that the outlet is nearby and clear of thecopier and furniture.

NOTE

Locate the Copier in a Well Ventilated Room� A negligible amount of ozone is generated during normal operation of

this copier. An unpleasant odor may, however, be created in poorlyventilated rooms during extensive copier operations. For acomfortable, healthy and safe operating environment, it isrecommended that the room be well ventilated.

Placer le copieur dans une pièce largement ventilée� Une quantité d’ozone négligeble est dégagée pendant le fonction-

nement du copieur quand celui-ci est utilisé normalement. Cependant,une odeur désagréable peut être ressentie dans les pièces dontl’aération est insuffisante et lorsqu’une utilisation prolongée du copieurest effectuée. Pour avoir la certitude de travailler dans unenvironnment réunissant des conditions de confort, santé et desécurité, il est préférable de bien aérer la pièce ou se trouve le copieur.

X-2 EP1054

As an ENERGY STAR® Partner, wehave determined that this copier meetsthe ENERGY STAR® Guidelines forenergy efficiency.

What is an Energy Star Copier ?

Energy Star Copiers have a feature that allows them to automatically turnoff or “go to sleep” after a period of inactivity, ensuring night and weekendshut off. This auto-feature can reduce a copier’s annual electricity costsby over 60 percent. In addition, high speed copiers will be set toautomatically make double sided copies. An organization’s paper costscan be reduced and the volume of paper sent into the waste stream willdecline. It takes 10 times more energy to produce a piece of paper than itdoes to make a single copy on a copier. Therefore, using less paper alsomeans decreased national energy consumption.

EP1054 X-3

EP1054

Thank you for choosing Minolta.

This operator’s manual explains how to operate the copier and replenishits supplies. It also gives some troubleshooting tips as well as generalprecautions to be observed when operating the copier.

To ensure the best performance and effective use of your copier, read thismanual carefully until you familiarize yourself thoroughly with its operationand features. After you have read through the manual, keep it for readyreference.

Please use this manual as a quick and handy reference tool forimmediately clarifying any questions which may arise.

CE Marking (Declaration of Conformity)

We declare under our sole responsibility that this copier and options towhich this declaration relates is in conformity with the specificationsbelow. This declaration is valid for the area of the European Union (EU)only.

Product Type Copying Machine

Product Name EP1054

Options MB-4

Standards Safety*2: EN 60 950 / 1992(A1 : 1993, A2 : 1993, A3 : 1995, A4 : 1996)(Safety of information technology equipment, includingelectrical business equipment)

EMC*1: EN55 022 Class B:1994 (A1:1995)(Limits and method for measurement of radiodisturbance characteristics of information technologyequipment (ITE))EN 50 082-1 / 1992(Electromagnetic compatibility-Generic immunitystandard Part1 : Residential, commercial and lightindustry)IEC 801-2 / 1991(Electrostatic discharge requirement)IEC 801-3 / 1984(Radiated electromagnetic field requirement)IEC 801-4 / 1988(Electrical fast transient / burst requirement)

Notes: *1) EMC performance :This product was designed for operation in a typicaloffice environment*2) First year of labelling according to EC-directive73/23 / EEC and 93 / 68 / EEC : 98

EC Directives Safety: 73 / 23 / EEC and 93 / 68 / EECBMC: 89 / 336 / EEC and 93 / 68 / EEC

X-4 EP1054

Terms and Symbols for the Type of Originals and Copy Paper

A few special terms and symbols are used in this manual to designatetypes of originals and copy paper. This page explains about these termsand symbols.

Feeding Direction (copy paper path)

In this copier system, copy paper is taken up from the right-hand side ofthe copier and fed through the copier toward the left-hand side, out faceup onto the Exit Tray. In the figure below, the direction in which the copypaper is fed, as indicated by the arrow, is called the “feeding direction.”

“Width” and “Length”

When we talk about the size of theoriginal or copy, we call side A “width”and side B “length.”

A: WidthB: Length

EP1054 X-5

Terms and Symbols Used

� Lengthwise

When the original or copy has a “length”longer than its “width,” we call it“lengthwise” and use symbol “L” or“ “.

� Crosswise

When the original or copy has a “length”shorter than its “width,” we call it“crosswise” and use symbol “C” or “ ”

X-6 EP1054

Safety Notes 1

1 Safety Notes

1.1 Installing the Copier

Installation Site

To ensure utmost safety and prevent possible malfunctions of the copier,install it in a location which meets the following requirements.

� A place away from a curtain or the like that may catch fire and burneasily.

� An area where there is no possibility of being splashed with water orother types of liquid.

� An area free from direct sunlight.

� A place out of the direct air stream of an air conditioner, heater, orventilator.

� A well-ventilated place.

� A dry place.

� A dust-free location.

� An area not subject to undue vibration.

� A stable and level location.

Power Source

The power source voltage requirements are as follows.

� Use a power source with little voltage fluctuation.Voltage Fluctuation: Within ±10%Frequency Fluctuation: 50/60 Hz Within ±0.3%

� If any other electrical equipment is sourced from the same poweroutlet, make sure that the capacity of the outlet is not exceeded.

� The outlet should be located near the copier and easily accessible.

� Never connect by means of a multiple socket any other appliances ormachines to the outlet being used for the copier.

� If an extension cord is needed, use one with a capacity more than thepower consumption of the copier.

� Make sure that no unusual, excessive force is being applied to thepower cord or extension cord.

EP1054 1-1

1 Safety Notes

Grounding

To prevent receiving electrical shocks in the case of electrical leakage,always ground the copier.

Connect the grounding wire to:

� The ground terminal of the outlet.

� A grounding contact which complies with the local electrical standards.

NOTE

� Never connect the grounding wire to a gas pipe, a grounding wire fora telephone or a water pipe.

Space Requirements

To ensure easy copier operation, supply replacement and servicemaintenance, adhere to the recommended space requirements detailedbelow.

NOTE

� Be sure to allow a clearance of 150mm. or more at the back of thecopier as there is a ventilation duct.

Copier

Scale: mm

1,250

655253

387

1,085448 637

841

469

372

1-2 EP1054

Safety Notes 1

1.2 Precautions for Use

Operating Environment

The operating environmental requirements of the copier are as follows.

Temperature: 10°C to 30°C (50°F to 86°F) with a fluctuation of10°C (50°F) per hour

Humidity: 15% to 85% with a fluctuation of 20% per hour

Using the Copier Properly

To ensure the optimum performance of the copier, follow the precautionslisted below.

� NEVER place a heavy object on the copier or subject the copier toshocks.

� NEVER open any doors, or turn OFF the copier while the copier ismaking copies.

� NEVER bring any magnetized object or use flammable sprays nearthe copier.

� NEVER place a vase or vessel containing water on the copier.

� NEVER drop paper clips, staples, or other small pieces of metal intothe copier.

� NEVER attempt to remove any Cover that is secured.

� NEVER remodel the copier, as a fire or electrical shock could result.

� ALWAYS insert the power plug all the way into the outlet.

� ALWAYS make sure that the outlet is visible, clear of the copier orcopier cabinet.

� ALWAYS ensure that the copier does not ride on the power cord orcommunications cable of other electrical equipment, and it does notget such a cord or cable wedged into its own mechanism.

� NEVER leave damage or cracks evident on the copier power cordunattended. If you find any of these conditions, immediately shut downthe copier, unplug the power cord, and call your TechnicalRepresentative for appropriate action.

� ALWAYS provide good ventilation when making a large number ofcontinuous copies.

� NEVER keep the copier running when it becomes inordinately hot orproduces abnormal noise. If that happens, immediately turn OFF thecopier, unplug it, and then call your Technical Representative.

EP1054 1-3

1 Safety Notes

NOTE

Locate the Copier in a Well Ventilated Room� A negligible amount of ozone is generated during normal operation of

this copier. An unpleasant odor may, however, be created in poorlyventilated rooms during extensive copier operations. For acomfortable, healthy, and safe operating environment, it isrecommended that the room be well ventilated.

Placer le copieur dans une pièce largement ventilée� Une quantité d’ozone négligable est dégagée pendant le

fonctionnement du copieur quand celui-ci est utilisé normalement.Cependant, une odeur désagréable peut être ressentie dans lespièces dont l’aération est insuffisante et lorsque une utilisationprolongée du copieur est effectuée. Pour avoir la certitude de travaillerdans un environnement réunissant des conditions de confort, santè etde sécurité, il est préférable de bien aérer la pièce ou se trouve lecopieur.

Care of Copier Supplies

Use the following precautions when handling the copier supplies (toner,paper, etc.).

� Store the paper, toner, and other supplies in a place free from directsunlight and away from any heating apparatus. Keep them in a dry,clean environment.

� Store paper, which has been removed from its wrapper but not loadedinto the drawer, in a sealed plastic bag in a cool, dark place.

� Use the correct toner for the exclusive use by the copier. Theapplicable copier model name is indicated on the Toner Bottle.

� Keep supplies out of the reach of children.

� If your hands become soiled with toner, wash them with soap andwater immediately.

Moving

If you need to transport the copier over a long distance, consult yourTechnical Representative.

1-4 EP1054

Safety Notes 1
Legal Restrictions on Copying
Certain types of documents must never be copied by the copier for thepurpose or with the intent to pass copies of such documents off as theoriginal. The following is not a complete list but is meant to be used as aguide to responsible copying.

Financial Instruments

� Personal Checks

� Travelers Checks

� Money Orders

� Certificates of Deposit

� Bonds or other Certificates of Indebtedness

� Stock Certificates

Legal Documents

� Food Stamps

� Postage Stamps (canceled or uncanceled)

� Checks or Drafts drawn by Government Agencies

� Internal Revenue Stamps (canceled or uncanceled)

� Passports

� Immigration Papers

� Motor Vehicle Licenses and Titles

� House and Property Titles and Deeds

General

� Identification Cards, Badges, or Insignias

� Copyrighted Works without permission of the copyright owner

In addition, it is prohibited under any circumstances to copy domestic orforeign currencies or Works of Art without permission of the copyrightowner.

When in doubt about the nature of a document, consult with legal counsel.

EP1054 1-5

1 Safety Notes

1-6 EP1054

Getting to Know Your Copier 2

2 Getting to Know Your Copier

2.1 System Overview

Multi Bypass Tray MB-4 <Option>

Holds up to 50 sheets of standard paperwhich is not loaded in any of theDrawers, allowing to make copies onthem, see page 3-14.

EP1054

The Paper Drawer can hold up to 250sheets of copy paper. The ManualBypass Tray allows you to make a copyon paper which is not loaded in theDrawer and which is fed into the copiermanually via this Tray.

EP1085

EP1054 2-1


2.2 Copier Parts and Accessories

Outside Copier

Pcs. Specification Description

1 Control Panel Use to start a copy cycle or to make copying-job settings,see page 2-6.

2 Original Cover Holds the original placed on the Original Glass in position.To place an original, raise the Cover and place it in positionon the Original Glass, see page 3-4

3 Power Switch Use to turn the copier ON and OFF, see page 2-11.

4 Manual Bypass Tray Use for manual feeding of paper into the copier,see page 3-13.

5 Right Door Open to clear a paper misfeed, see page 5-7.

6 Total Counter Shows the total number of copies made so far.

7 Front Door Open to:� Replace the Toner Bottle, see page 5-2.� Clear a paper misfeed, see page 5-7.� Clean the Corona Units, see page 8-4.Closing the Front Door after a misfeed has been clearedwill turn the Misfeed Indicator on the control panel OFF.

8 Paper Drawer Holds up to 250 sheets of paper. The Edge Guide andTrailing Edge Stop are movable, allowing you to load paperof different sizes, see page 5-4.

9 Exit Tray Holds copies fed out of the copier.

10 Copy Tray Extender Slide this out when making copies on large-size paper.

1 2

3

4

5

678910

2-2 EP1054

Inside Copier

1 Original Width/LengthScale

Place the original along these Scales for correctpositioning, see page 3-4.

2 Original Pad Holds the original in position on the Original Glass.

3 Original Glass Place the original face down on this Glass, see page 3-4.

4 Corona Unit CleaningLever (Upper/Lower)

Operate the Lever to clean the corresponding Corona Unitif unwanted lines are produced on the copy,see page 8-4.

5 Lock Release Lever Turn counterclockwise to swing up the Upper Half of thecopier to clear a paper misfeed, see page 5-7.

6 Toner Bottle Contains toner. Replace it with a new one when the AddToner Indicator lights up, see page 5-2.

7 Toner Bottle Holder Swing open to replace the Toner Bottle, see page 5-2.

1

2

3

4

5

67

EP1054 2-3



8 Upper Half of Copier The copier main body can be divided into two parts, theupper and lower. The Upper Half can be swung upward,see page 5-7.

9 Imaging Unit Converts the original image to the copy image.

10 Imaging Unit LockRelease Lever

Operate when replacing the Imaging Unit, see page 5-13.

11 Dehumidifier Switch Turn ON to prevent condensation from forming on the PCDrum when power is turned OFF. (For TechnicalRepresentative only)

12 Fusing Unit Handle Hold onto this Handle when lifting the Upper Half of theFusing Unit, see page 5-7.

13 Fusing Unit Fuses the toner image onto the paper.

8 9

10

11

12

13

2-4 EP1054

Multi Bypass Tray MB-4

1 Paper Guide Plate Slide as necessary to the size of the copy paper, see page3-14.

2 Multi Bypass Tray Load your paper on this Tray. It allows you to make copiescontinuously on paper fed from this Tray, see page 3-14.

3 Multi Bypass TrayExtender

Slide this out to use large-size copy paper, see page 3-14.

1

2

3

EP1054 2-5


2.3 Control Panel Keys and Indicators

Control Panel


1 Clip Tray Use this tray to put the paper clips used with thedocuments.

2 Drum Dehumidify Key Press to remove condensation formed on the surface of thePC Drum, see page 4-4.

3 Auxiliary TonerReplenishing Key

Press when the image on the copy becomes too light, seepage 4-3.

4 Meter Count Key Press to check for the current counts of four electroniccounters of the copier, see page 4-2.

5 Display See the other pages in this manual, see page 2-8.

6 Paper Select Key Press to select the paper source, Drawer or Multi BypassTray (option), when the Multi Bypass Tray is mounted tothe copier, see page 3-6.

7 Exposure Control Key( ,Darker)

Press as necessary to make the exposure level higher inthe Manual Exposure Mode, see page 3-10.

8 Auto Exposure ModeKey

Press to select the Auto Exposure, Manual Exposure orPhoto Mode, see page 3-10.

9 Exposure Control Key( ,Lighter)

Press as necessary to make the exposure level lower in theManual Exposure Mode, see page 3-10.

10 Book Key Press as necessary to select the Book Copying Mode , seepage 3-11.

A

Meter Count

Toner

Drum DehumidifyPaper

50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo

141%115%100% 81% 70%

A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

10 9 8 7

654321

2-6 EP1054



11 Zoom Down Key Press as necessary to make the zoom smaller in 1%increments, see page 3-8.

12 Zoom Up Key Press as necessary to make the zoom larger in 1%increments, see page 3-8.

13 Key Pad Use to enter the number of copies to be made and othernumeric data.

14 Energy Saver Key Press to set the copier into the Energy Saver Mode, seepage 2-12.

15 Panel Reset Key � Press to set the copier into the initial mode, clearing allsettings made previously on the control panel, see page2-13.

� Holding down the Key for 3 seconds will initiate theUser’s Choice, see page 4-11.

16 Clear Key Press to clear the number of copies, zoom and othersettings.

17 Stop Key Press to stop a multi-copy cycle.

18 Start Key Press to start a copy cycle.

19 Enlargement Key Press to select a desired fixed enlargement ratio, see page3-8.

20 Full Size Key Press to select full size (100%), see page 3-8.

21 Reduction Key Press to select a desired fixed reduction ratio,see page 3-8.

1

4

7

3

6

9

C

2

5

8

0

100%

%50%~200%

o

Darker

o

oto

141% A4 @ A3 115% B4 @ A3 100% @ @ @Full Size 81% B4 @ A4 70% A3 @ A4

@@ B4@ FLS.@ Inch

11 12 13 14

15161718192021

EP1054 2-7


Display

Monitor Display

� Paper Source IndicatorShows the paper source which iscurrently selected for use, see page3-6.Example: Shows that the Drawer iscurrently selected for use.

� Closure Failure IndicatorThe location of a Door left open isalso indicated by a round marker,see page 5-6.Example: Indicates that the FrontDoor or Right Door is left open.

� Misfeed IndicatorIndicates that a paper misfeed hasoccurred. The location of themisfeed is also indicated by a roundmarker, see page 5-7.Example: Shows that a misfeed hasoccurred inside the copier.

� Call-Tech.-Rep. IndicatorIndicates that the copier hasdeveloped a malfunction.When a malfunction occurs, thecorresponding malfunction code isshown across the Zoom RatioIndicator and Multi-Copy Display, see page 5-10.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

Monitor DisplayPaper InformationDisplay

Zoom Ratio Indicator/Multi Copy Display

Exposure InformationDisplay

2-8 EP1054

� Add Toner Indicator
Indicates that the Toner Bottle isrunning out of toner. Replace theToner Bottle as soon as possible,see page 5-2.

� I. U. Service Life IndicatorIndicates that the Imaging Unitneeds replacement. Replace theImaging Unit, see page 5-11.

Paper Information Display

� Paper Size IndicatorsShow the size of paper currentlyloaded in the Drawer,see page 3-6.

� Add Paper IndicatorLights up when the currentlyselected Drawer has run out ofpaper. Add paper as necessary, seepage 5-4.

Zoom Ratio Indicator / Multi-Copy Display

Each shows the following data.

� ExampleZoom ratio: 100%No. of copies: 1

� Count of the Total CounterExample: 93,930 (copies)

� User’s Choice code and settingvalueExample: Choice code: 14,Setting: 1

� Malfunction codeExample: Malfunction code C0F30

Paper A4

1142O143DA

Paper

%

%

%

1142O025AA

%

EP1054 2-9


Exposure Information Display

� Auto Exposure IndicatorIndicates that the copier is now inthe Auto Exposure Mode, see page3-10.

� Exposure Level IndicatorShows the exposure setting level inthe Manual Exposure Mode, seepage 3-10. The center LED isnormally lit.

� Photo Mode IndicatorIndicates that the copier is now inthe Photo Mode, see page 3-10.

Auto

Lighter Darker

Photo

Auto/Photo

Auto

Lighter Darker

Photo

Auto/Photo

Auto

Lighter Darker

Photo

Auto/Photo

2-10 EP1054


2.4 Turning ON and OFF, and Resetting the Copier

Turning ON and OFF

Turning the Copier ON: Press thePower Switch to the “1” position.

Turning the Copier OFF: Press thePower Switch to the “…” position.

NOTE

� The Auto Shut OFF function will automatically shut down the copier agivenperiod of time after the last activity. The initial setting is 30minutes.

Useful TipThe period of time can be changed by using the User’s Choice, seepage 4-10.

When the Copier is Turned ON

� The Start Key blinks orange, indicating that the copier is now warmingup.

� In about 30 sec., the Start key turns green. Now the copier is ready tomake copies.

Blinking Orange Turns Green

EP1054 2-11


Minimizing the Warm-up Time

Instead of turning the copier OFF, it’s a good idea to use the Energy SaverMode. This mode will minimize the time for the copier to complete thewarm-up cycle to about 20 sec.

The Energy Saver Mode is automatically activated a given period of timeafter the copier has been used last. The initial is 15 min.

Useful TipThe time for the copier to enter the Energy Saver Mode can beselected from 1 to 98 min., or for 240 min. by using User’s Choice, seepage 4-10.

NOTE

� The copier is shut down if the Auto Shut OFF function activates whilethe copier is in the Energy Saver Mode.

� Entering The Energy Saver Mode

Press the Energy Saver Key on thecontrol panel.

All control panel Indicators go out,except that the Start Key and theEnergy Saver Key which remain litgreen.

� Leaving the Energy Saver Mode

Press any Key on the control panel,for instance, the Start Key.

This cancels the Energy SaverMode, and the copier will be readyto make copies in about 20seconds.

Energy Saver

Panel Reset

1142O093CA

1139O2360A

2-12 EP1054

Initial Mode and Panel Resetting
� Initial Mode

When the Power Switch is turned ON, the initial settings are indicated onthe control panel. The initial settings serve as the reference for all controlpanel settings to be later made.

� No. of copies to be made: 1� Zoom ratio: Full size (100%)� Auto Exposure Mode� Non-Sort Mode

Useful TipThe initial settings can be changed by User’s Choice. For details seepage 4-6.

� Panel Resetting

The Panel Reset Key resets all controlpanel settings to default settingsincluding the number of copies to bemade and zoom ratio.

Useful TipThe Panel Reset Key enables you to cancel all previous settingsefficiently. To avoid miscopy, try to press the Panel Reset Key beforeattempting to make any setting for your own job.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

Panel Reset

1139O4782A

EP1054 2-13


Auto Reset Function

If no Key on the control panel is pressed within about 60 seconds after acopy cycle has been completed or copying settings made, the Auto ResetFunction is activated to cause the copier to return to the initial modeautomatically.

Useful TipThe Auto Reset Function can be enabled or disabled by User’sChoice. For more details, see page 4-6.

2-14 EP1054

Making Copies 3

3 Making Copies

3.1 Copying OverviewPlace the original in position (step 1), set the number of copies to be made(step 7), and press the Start Key (step 8). This will allow you to make afull-size copy or copies on paper of the same size as the original. Thecontrol panel selection ( ) you make will change the magnificationratio and the image density.

1 Placing the Original

Raise the Original Cover and placethe original face down on theOriginal Glass, see page 3-4.

2 Checking the Copy Paper Size andSelecting the Paper Source

Check whether the desired papersize is loaded into the Drawer ornot, see page 3-6.� YES:

Go step 3 or step 7.� NO:

Load the desired paper size ormake a copy using a Manual Bypass Tray.

� Add Paper Indicator, see page 5-5.

� Manual Bypass Copying, see page 3-13.

1142O138DA

Paper A4

EP1054 3-1

3 Making Copies

3 To change the Zoom Ratio

Selecting the Zoom Ratio� Select the desired fixed zoom

ratio, see page 3-7.

� Set the zoom ratio,see page 3-8.

4 To change the Exposure Level

Setting the Image Densitry� Set the image density in the

Manual Exposure Mode, seepage 3-10.

� Select the Auto Exposure Modeor Photo Mode, see page 3-10.

5 To copy from a book

Selecting Book CopyingPress the Book Key to select theBook Copying Mode,see page 3-11.

100%

1142O034AA

50%~200%

A

Auto

Lighter Darker

Photo

Auto/Photo

A

Auto

Lighter Darker

Photo

Auto/Photo

Book

3-2 EP1054

Making Copies 3
6 Setting the Number of Copies
� Using the Key Pad, set the number of copies to be made or thenumber of copy sets.

� If you enter a wrong number, press the Clear key and enterthe correct number.

7 Starting the Copy Cycle

� Press the Start Key to start thecopy cycle.

� Press the Stop Key to stopthe copy cycle.

C

1139O2360A

EP1054 3-3

3 Making Copies

3.2 Copying Procedure

Placing Originals

Place the original face down on the Original Glass. Different methods areused to load the originals depending on the type of originals .

Sheet Originals (Standard Size)

1 Raise the Original Cover.

Place the original face down on theOriginal Glass, and align its rear leftcorner with the Ö marker on theOriginal Width Scale on the left sideof the platen.

2 Gently lower the Original Cover.

Highly Transparent Originals

1 Place the original in the same way as the sheet originals.

2 Place a blank sheet of paper of thesame size as the original over theoriginal. Then, lower the OriginalCover.

NOTE

� If this is not done, the copy produced may be of very poor quality.

3 Gently lower the Original Cover.

3-4 EP1054

Making Copies 3
Book Original
“Book original” refers to an open boundoriginal.Position the higher-numbered page onthe Original Width Scale end.

NOTE

� Not positioning an open book properly will result in copies with pagesin incorrect order.

� Do not place an original weighing more than 3kg on the Original Glass,as an image problem could result.

EP1054 3-5

3 Making Copies

Checking the Copy Paper Size and Selecting the Paper Source

When the copier is not equipped with the Multi Bypass Tray, it isnecessary to check that the desired paper size is loaded into the Drawer.If it is not loaded, make a copy using a Manual Bypass Tray or load thedesired paper size into the Drawer.

� Manual Bypass Copying see page 3-13.

� Add Paper Indicator see page 5-4.

When the copier is equipped with the Multi Bypass Tray, the paper source(paper size) can be selected, Drawer or Multi Bypass Tray.

Selecting the Paper Source(Only when the Multi Bypass Tray is used)

Each time the Paper Select Key is pressed, the Paper Source Indicatorsor Multi Bypass Indicator lights up alternately. Also, the Paper SizeIndicator corresponding to that of the Drawer lights up.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

Paper

LGL. 11x17LTR. 11x14LTR. 5 x8 Metric

/1 2 /1 2 Paper

A3 @ @A4 @ @ A4 @ @ A5 @ @

3-6 EP1054

Making Copies 3

3.3 Zoom Ratio

The zoom ratio can be set manually by the operator. Select theappropriate mode according to your needs. The selected zoom ratio isshown on the Zoom Ratio Indicator.

Fixed Zoom Ratios

� Three reduction ratios (50%, 70%, 81%)

� Three enlargement ratios(115%, 141%, 200%)

� And Full Size (100%).

Zoom Ratios

Any ratio from 50% to 200% (in 1%increments) can be selected.

Selecting the Fixed Zoom Ratios

Press the Reduction, Full Size, orEnlargement Key to select a fixed zoomratio of your choice.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

100%

1142O142DC

141% A4 A3115% B4 A3100% Full Size 81% B4 A4 70% A3 A4

50%~200%

1139O3590A

11

100%

EP1054 3-7

3 Making Copies

� Reduction

Each time the Reduction Key ispressed, it selects a new reductionratio.

The Zoom Ratio Indicator displays theactual percentage of the selected ratio.

� Enlargement

Each time the Enlargement Key ispressed, it selects a new enlargementratio.

The Zoom Ratio Indicator displays theactual percentage of the selected ratio.

� Full Size

Press the Full Size Key to select fullsize (100%).

Setting a Zoom Ratio

Hold down the Zoom Down or UpKey until the desired zoom ratio is

reached.

Zoom Down Key makes the ratiosmaller

Zoom Up Key makes the ratio greater

Useful TipTo save time, first select the fixed ratio nearest to the target zoom ratiobefore using the Zoom Up or Down Key.

100%


1142O140DC

100%

1142O141DC


100%

1142O142DC


50%~200%

1139O3640A

Zoom range:50% to 200%

3-8 EP1054

Making Copies 3

3.4 Image Density

The image density level of copies can be adjusted either in the AutoExposure Mode, Manual Exposure Mode or Photo Mode. Select theappropriate mode according to your particular needs.

Types of Exposure Modes

� Auto Exposure ModeThe copier reads the image densityof the original and automaticallyadjusts the exposure level for theoptimum copy image density.

� Manual Exposure ModeIn the Manual Exposure Mode, youcan vary the exposure level in ninesteps.

� Photo ModeThe copier can make a faithfulreproduction of an original havinghalftone images such as photos.The image density of the photo maybe varied in nine steps.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

Auto

Lighter Darker

Photo

Auto/Photo

1152O021CA

Auto

Lighter Darker

Photo

Auto/Photo

1152O020CA

Auto

Lighter Darker

Photo

Auto/Photo

EP1054 3-9

3 Making Copies

Selecting the Auto Exposure Mode

Press the Auto Exposure Mode Keyas necessary to light up the Auto

Exposure Indicator .

Each time the Auto Exposure ModeKey is pressed, the Auto ExposureMode, Manual Exposure Mode andPhoto Mode are selected alternately.

Selecting the Manual ExposureMode

Hold down the Exposure Control Keyor until the desired exposure

level is reached.

To make the image darker :Press or hold down the ExposureControl Key .To make the image lighter :Press or hold down the ExposureControl Key .

Selecting the Photo Mode

Press the Auto Exposure Mode Keyas necessary to light up the Photo

Mode Indicator .

Hold down the Exposure Control Keyor until the desired exposure

level is reached.

Useful TipsThe exposure level in the Auto Exposure Mode can be varied by usingthe User’s Choice, see page 4-7.

The copier has been factory-set to automatically select the AutoExposure Mode. The User’s Choice can be used to change this defaultsetting to the Manual Exposure Mode, see page 4-8.

A

Auto

Lighter Darker

Photo

Auto/Photo

A

❍ Auto

A

A

Auto

Lighter Darker

Photo

Auto/Photo

A

Auto

Lighter Darker

Photo

Auto/Photo

A

❍ Photo

3-10 EP1054

Making Copies 3

3.5 Book CopyingSelect Book Copying when you want tomake a 1-sided copy of each page of anopen book.

Selecting the Book Copying Mode

1 Position the higher-numbered pageon the Original Width Scale end.

If the book is thick, you can makecopies with the Original Coverraised.

“Book original” refers to an openbound original.

NOTES

� Not positioning an open book properly will result in copies with pagesin incorrect order.

� Do not look directly at the Original Glass surface, as a very intensebeam of light can be emitted.

2 Press the Book Key.

The Book Indicator lights up.

Book

Original Copy

Book

EP1054 3-11

3 Making Copies

NOTES

� If paper other than A4 crosswisepaper is loaded into the Drawerwhen the Book Copying Mode isselected, the Drawer Indicator andthe corresponding Paper SizeIndicator blink on the Control Panel.

� In such a case, load paper of thesame size and in the same directionof each page of a book into theDrawer.

Paper

A3 @ @A4 @ @ A4 @ @ A5 @ @

A4 Crosswise

3-12 EP1054

Making Copies 3

3.6 Manual Bypass CopyingUse the Manual Bypass to make copies on paper not loaded in theDrawer, or to copy onto OHP transparencies, translucent paper, or anyother special paper. When using Multi Bypass Tray, you can load multiplesheets of copy paper.

� Types of Paper

� Plain paper (weighing 60g/m2 to 90g/m2)� Thick paper (weighing 91g/m2 to 157g/m2)� OHP transparencies, translucent paper

� Paper Size

� Width: 100mm to 297mm� Length: 140mm to 432mm

� Capacity

� Plain paper, Thick paper, OHP transparencies, translucent paper... 1 sheet at a time

� Capacity Multi Bypass Tray

� Plain paper: Approx. 50 sheets� Plain paper (once-copied paper): Up to 20 sheets� Thick paper, translucent paper: Approx. 20 sheets� OHP transparencies: Up to 5 sheets

IMPORTANT

� When making multiple copies using OHP transparencies, set the CopyTray into the upper position if there is no Sorter or Staple Sortermounted.

EP1054 3-13

3 Making Copies

Using the Manual Bypass Tray

1 Place the original on the Original Glass and make the control panelsettings.

2 Insert the copy paper into theManual Bypass Tray.

This automatically starts the copycycle.

NOTES

� Insert the copy paper one sheet at a time.

� Do not insert a sheet of paper while the copier is warming up or in amulti-copy cycle.

� The Auto Size Mode and Book Copying Mode cannot be selected formanual bypass copying.

Using the Multi Bypass Tray (Option)

1 Place the original on the Original Glass and make the control panelsettings.

2 Swing down the Multi Bypass Trayand slide the Paper Guide Plate tothe size of the copy paper.

NOTE

� Pull out the Multi Bypass Tray Extender if you are using larger paper.

3-14 EP1054

Making Copies 3
3 Load a neat stack of copy paper on
the Tray and insert it into the copieruntil it stops.

NOTES

� The paper should be loaded no higher than the Ä (Max. LevelIndicator).

� Before inserting, fan the paper stack well if you are using OHPtransparencies or translucent paper.

� Correct any curl if you are using thick paper.

� The paper will be copied on the side facing up.

4 Using the Key Pad, enter the number of copies to be made.

5 Press the Start Key to start the copycycle.

NOTES

� Do not insert the paper while the copier is in the warm-up cycle or amulti-copy cycle.

� The Auto Size and Book Copying Mode cannot be selected for manualbypass copying.

1139O2360A

EP1054 3-15

3 Making Copies

3-16 EP1054

Auxiliary Functions 4

4 Auxiliary Functions

4.1 Checking the Total Number of Copies ModeThis function allows you to check thetotal count of the two counters of thecopier.

Types of Counters

� Total Counter:Shows the total number of copies made since the installation of thecopier.

� Size Counter:Shows the number of copies made on paper of a size preset by theTechnical Representative.

Counter Display

Example: The count is 12,345 (copies).

Meter Count

Toner

Drum Dehumidify

1142O152CA

50%~200%

The Zoom Ratio Indicator showsthe upper 3 digits of the count

The Multi-Copy Display showsthe lower 2 digits of the count

EP1085 4-1


Using the Meter Count Function

1 Press the Meter Count Key once.

The count of the Total Counter isshown across the Zoom RatioIndicator and Multi-Copy Display.

2 Press the Meter Count Key again.

The count of the Size Counter isshown across the Zoom RatioIndicator and Multi-Copy Display.

3 Press the Meter Count Key onceagain.

This returns the copier to the normalstate.

Meter Count

Toner

Drum Dehumidify

Meter Count

Toner

Drum Dehumidify

Meter Count

Toner

Drum Dehumidify

4-2 EP1085


4.2 Toner Replenisher Function(Increasing the Image Density)The copier tends to exhaust the supplyof toner rapidly when making a numberof copies from an original with dark solidareas. As a result, the image density ofthe copy will become lighter. In such acase, you can use the TonerReplenisher function to regain thenormal image density quickly.

Even if you continue making copies after the image density has becomelighter, the copier will gradually recover the normal image density. TheToner Replenisher Mode can, however, be used to obtain the normalimage density more quickly.

� Press the Auxiliary TonerReplenishing Key.

This causes the copier to initiatetoner replenishing, which lasts for90 seconds at maximum.

NOTES

� Do not turn the Power Switch OFF or open the Front or Right Doorwhile the copier is replenishing toner.

� Toner is not replenished if the image density is sufficiently high.

Meter Count

Toner

Drum Dehumidify

1142O152CA

Original Copy Copy Made AfterToner Replenisher

Meter Count

Toner

Drum Dehumidify

1142O118CA

EP1085 4-3


4.3 Drum Dehumidifier FunctionDuring times of high humidity or whenthere are sudden rapid changes inhumidity (especially when you areusing a heater in winter),condensation*1 could form on thesurface of the PC Drum*2, resulting inblotchy copies. In such instances, usethe Drum Dehumidify Key to dry thesurface of the PC Drum.

*1: Condensation:A phenomenon in which small drops of water are formed on cold surfaces,such as the surface of the PC Drum.

*2: PC Drum:Functions in the copier as film does in a camera.

1 Press the Drum Dehumidify Key.

This sets the copier into the DrumDehumidifier Mode which lasts for90 seconds.

2 Make a copy to check that the copyimage is clear.

Run the Drum Dehumidifier cycleonce again if the copy image is not yet clear.

Useful TipA copy cycle can be initiated even while the copier is in the DrumDehumidifier Mode.

Meter Count

Toner

Drum Dehumidify

1142O152CA

Before a DrumDehumidifier Operation

After a DrumDehumidifier Operation

Meter Count

Toner

Drum Dehumidify

1142O119CA

4-4 EP1085


NOTE

� The copier cannot be set into the Drum Dehumidifier Mode while it iswarming up.

EP1085 4-5


4.4 User’s ChoiceThe copier has been set so that themost frequently used settings areautomatically selected in the initialmode. The User’s Choice allows you toselect the default settings which areautomatically selected in the initialmode according to your own needs.

By setting defaults for the paper size,zoom ratio and other settings that are most frequently used, time andeffort to make extra settings will be eliminated when the copier is turnedON or when the auto reset function is activated.

For more details, consult your Technical Representative.

Functions Available in User’s Choice

Description of Each User’s Choice Function

� U-7 Non-Auto Shut OFF

This function can disable the Auto Shut OFF function.

ChoiceCode Function

ChoiceCode Function

U-7 Non-Auto Shut OFF U-20 Auto Panel Reset ON/OFF

U-13 Default auto exposure level U-21 Energy Saver ON Timing

U-14 Default exposure mode/level U-28 Auto Shut OFF Timing

Setting Description Initial Setting

0 “Non-Auto Shut OFF” disabled (OFF) �

1 “Non-Auto Shut OFF” enabled (ON)

%50%~200%


4-6 EP1085

� U-13 Default auto exposure level
Determines the default exposure level in the Auto Exposure Mode.

When the exposure level is “Low,” the greater the level number is, thelower the exposure level.

When the exposure level is “High,” the greater the level number is, thehigher the exposure level.


46 Low, level 4

47 Low, level 3

48 Low, level 2

49 Low, level 1

50 Standard �

51 High, level 1

52 High, level 2

Lower � �� Higher

Level 4 3 2 1 Standard 1 2

EP1085 4-7


� U-14 Default exposure mode/level

Determines the default exposure mode, either Auto or Manual, selectedwhen the control panel settings are reset.

If Auto is selected, this function also allows you to specify the defaultexposure level (EXP) in the Manual Exposure Mode, after the AutoExposure Mode has been canceled.

If Manual is selected, the function also allows you to specify the defaultexposure level (EXP) in the Manual Exposure Mode.

If any value between “0” and “8” is selected:The Auto Exposure Mode is selected.

If any value between “10” and “18” is selected:The Manual Exposure Mode is selected.

Auto Exposure Mode as Default

� Manual Exposure Mode as Default

SettingDescription

Initial SettingDefault Mode Exposure Setting in Manual Mode

0 Auto Manual EXP1

1 Auto Manual EXP2

2 Auto Manual EXP3

3 Auto Manual EXP4

4 Auto Manual EXP5 �

5 Auto Manual EXP6

6 Auto Manual EXP7

7 Auto Manual EXP8

8 Auto Manual EXP9


10 Manual Exposure Mode / EXP1









4-8 EP1085

With EXP5 at the central level, theexposure level is lower as the numberbecomes smaller, and it is higher as thenumber becomes greater.
� U-20 Auto Panel Reset ON/OFF

Selects whether to activate the Auto Panel Reset function 60 secondsafter a copy cycle has been completed or a control panel key has beenpressed.

If “0” is selected:The control panel settings remain valid even after 60 seconds.

If “1” is selected:The control panel settings are canceled and the copier is reset into thedefault mode after 30 seconds. (Auto Panel Reset)

If “2” is selected:The control panel settings are canceled and the copier is reset into thedefault mode after 60 seconds. (Auto Panel Reset)


0 Auto Panel Reset is not activated.

1 Auto Panel Reset is activated (after 30 sec.)

2 Auto Panel Reset is activated (after 60 sec.) �

Lighter DarkerAuto/Photo

1 2 3 4 5 6 7 8 9

EP1085 4-9


� U-21 Energy Saver ON Timing

Select whether or not to set the copier into the Energy Saver mode afterthe lapse of a given period of time after a copy cycle has been completedor a key on the control panel has been operated.

The period of time can fall within the range of 1 to 98 min., or be set to 240min.

The initial setting is 15 min.

� U-28 Auto Shut OFF Timing

Select whether or not to enable the Auto Shut OFF Function that turnspower off automatically after the lapse of a given period of time after acopy cycle has been completed or a key on the control panel has beenoperated.

In the initial setting, the Auto Shut OFF Function is activated after 30 min.

If you want to disable the Auto Shut OFF function, first select “1” in theNon-Auto Shut OFF Mode then select “0” in this Mode, see page 4-6.


1 Enabled : 1 min.

2 Enabled : 2 min.

3 Enabled : 3 min.

::

::

98 Enabled : 98 min.



0 Disabled*

1 Enabled : 1 min.

2 Enabled : 2 min.

3 Enabled : 3 min.

: :



4-10 EP1085

Making the User’s Choice Mode Settings
1 Keep pressing the Panel Reset Key for about 3 seconds.

[U] appears on the Zoom Ratio Indicator, and the indicator on theMulti-Copy Display goes out.

2 Using the Key Pad, enter the desired Choice Code number.If you have pressed an incorrect number, press the Clear Key, thenenter the correct number.

Example: Selecting the Default Finishing Mode: Press andthe Zoom Ratio Indicator shows [U 14].

3 Press the Start Key.

This causes the current setting of that particular choice code to beshown on the Multi-Copy Display.

Panel Reset

1139O4782A

1139O3850A 1139O3860A

Zoom RatioIndicator

Multi-CopyDisplay

1 4

1142O056AA

1

7

3

6

9

C

2

5

8

0

4

1139O3860A

Multi-CopyDisplay

Zoom RatioIndicator

1139O2360A

1139O3880A

Multi-CopyDisplay

Zoom RatioIndicator

EP1085 4-11


4 Press the Clear Key.

This clears the current setting.

5 Using the Key Pad, enter the new setting.

The Multi-Copy Display shows the new setting.

For the Choice Code see page 4-6.

6 Press the Start Key.

This enters the new setting.

Repeat steps 2 to 6 to make new settings for other User’s Choices.

1142O169AA

1

7

3

6

9

C

2

5

8

0

4

1139O3860A

Multi-CopyDisplay

Zoom RatioIndicator

1142O171AA

1

7

3

6

9

C

2

5

8

0

4

1139O3890A

Multi-CopyDisplay

Zoom RatioIndicator

1139O2360A

1139O3850A 1139O3860A

Zoom RatioIndicator

Multi-CopyDisplay

4-12 EP1085

7 Press the Panel Reset Key.
This allows the copier to leave theUser’s Choice Mode and the controlpanel shows the default settingsagain.

NOTE

� If the Choice Code number on the Zoom Ratio Indicator or codes onthe Multi-Copy Display start blinking when the Start Key is pressedfollowing step 2 or 5, that entry is invalid. Check the correct number.Press the Clear Key and enter the correct one.

Panel Reset

1139O4782A

EP1085 4-13


4-14 EP1085

When an Indicator Lights Up 5

5 When an Indicator Lights Up

5.1 Quick Reference for Indicator Lights

When the copier encounters any of the following conditions, acorresponding warning indicator lights up. Some of the warning conditionsentail inhibition of the initiation of a copy cycle:

� A control panel key or keys have been incorrectly operated.

� Not all necessary conditions are met to start a copy cycle.

� The copier requires the operator’s intervention during a copy cycle.

The following table explains the most important warning conditions. Youwill find more detailed procedures on the page referenced in the “Action”column.

Warning Indicators

Indicator Copier State Action

Add TonerIndicator

The copier has run out of toner.(Warning only and a copy cycle canstill be initiated.)

Replace the Toner Bottle followingthe steps given in the “Add TonerIndicator” section, see page 5-2.

Add PaperIndicator

The paper has run out. Add paper by following the stepsgiven in the “Add Paper Indicator”section, see page 5-4.

MisfeedIndicator

There is a misfeed sheet of paperinside the copier or an option.

Check the Monitor Display for thelocation of the misfeed and clear themisfeed sheet of paper asinstructed, see page 5-7.

Call-Tech.-Rep. Indicator

The copier has developed atechnical malfunction.

If the Call-Tech.-Rep. Indicatorremains lit even after you have resetit, call your TechnicalRepresentative, see page 5-10.

I.U. ServiceLife Indicator

Indicates that the Imaging Unitneeds replacement.

Replace the Imaging Unit, see page5-11.

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

EP1085 5-1


5.2 Detailed Instructions for Indicator Lights

Add Toner Indicator

The Add Toner Indicator lights up whentoner in the Toner Bottle is running out.Once the Indicator lights up, replace theToner Bottle with a new one as soon aspossible by following the proceduregiven below.

Replacing the Toner Bottle

1 Open the Front Door.Swing open the Toner Bottle Holderand pull out the old Toner Bottle.

2 Tap the new Toner Bottle on a hardsurface, such as a desk, severaltimes. Then, turn the Toner Bottleover and tap it several times againin the same manner.

3 Shake the new Toner Bottle well.

5-2 EP1085

4 With the Seal on the Toner Bottle
facing up, slowly peel off the Seal asillustrated.

NOTE

� Be careful, some toner may puff outfrom the bottle.

5 Ensuring that the arrows ( ) on theToner Bottle are facing you, insertthe Bottle into position.

NOTE

� Insert the Bottle all the way into thecopier until the marking on the Bottle is aligned with the markingon the Toner Bottle Holder.

6 Swing the Toner Bottle Holderclosed and close the Front Door.

NOTES

� Try to replace the Toner Bottle witha new one as soon as possible oncethe Add Toner Indicator lights up. Continuing to make copies withoutchanging the Toner Bottle will result in increasingly lighter images.

� Use ONLY the specified toner for this copier. Using any other tonercould result in image trouble.

Toner Replenisher FunctionUse the Toner Replenisher Function if the image is light immediatelyafter replacing the Toner Bottle with a new one, see page 4-3.

EP1085 5-3


Add Paper Indicator

When the Drawer or the Multi BypassTray has run out of paper, the AddPaper Indicator lights up. At this time,you cannot start a new copy cycle

Use the following procedure to loadpaper into the Drawer or the MultiBypass Tray.

Adding Paper (Drawer)

1 Slide out the Drawer and pressdown the Paper Lifting Plate.

2 Slide out the Edge Guides in thedirection of the arrows.

3 Load the paper stack into theDrawer so that its front side facesdown. Make sure that the paperstack rests under the two catches ofthe Drawer.

NOTE

� The paper should be loaded nohigher than the Ä (Max. LevelIndicator) on the Edge Guide.

Paper

5-4 EP1085

4 Slide the Edge Guides tightly up
against the paper. Gently slide theDrawer back in.

NOTE

� When loading Inch Size paper intothe Drawer, flip the Marketing AreaSwitch located in the rear left cornerof the Drawer to “Inch”.

Adding Paper (Multi Bypass Tray)

The indications on the left show that theMulti Bypass Tray has run out of paper.

1 Load the paper stack onto the Trayso that its front side faces up andinsert it until it stops.

NOTES

� The paper should be loaded no higher than Ä (Max. Level Indicator).

� Before inserting, fan the paper stack well if you are usingtransparencies or translucent paper.

� Correct any curl if you are using thick paper.

Paper

EP1085 5-5


Closure Failure Indicator

The Closure Failure Indicator lights up ifa copier door is left open, or an option isnot attached properly. The MonitorDisplay shows the location of theclosure failure. At this time, you can nolonger start a new copy cycle. Correctthe closure failure by following theprocedure given below.

Check that the Right Door or Front Door is closed.

Monitor Display Check Location

5-6 EP1085

Misfeed Indicator
If a paper misfeed occurs during a copycycle, that copy cycle stops. The Mis-feed Indicator lights up and the MonitorDisplay shows the location. At this time,you cannot start a new copy cycle.

Misfeed Clearing Procedure

NOTE

� Be careful not to touch the areas marked with High Voltage andCaution: HOT with bare hands.

� When the copier is equipped with a Multi Bypass Tray

1 Unload the paper stack from theMulti Bypass Tray.

2 Open the Front Door and turn theLock Release Levercounterclockwise to unlock andswing up the Upper Half of thecopier.

3 Holding up the Fusing Unit, pull outthe sheet of paper.

CAUTION: HOT

� The Fusing Unit and its surroundingareas may be extremely hot. DONOT touch any part except theFusing Unit Handle (yellow).

EP1085 5-7


4 Remove any sheet of paper fromthe Transport Section.

5 Open the Right Door.

Then pull out the sheet of paperfrom the Manual Bypass Port.

6 Pull out the sheet of paper from thePaper Take-Up Section.

7 Close the Right Door.

8 Gently swing down and lock theUpper Half of the copier. Then closethe Front Door.

5-8 EP1085

9 Slide out the Drawer and unload the
paper from the Drawer.

Next, push down the Paper LiftingPlate until it is locked into position.

10Fan the paper and reload it.

NOTE

� Make sure that the paper stack rests under the two catches of theDrawer.

11Slide the Drawer back in.

� When the copier is equippedwith a Multi Bypass Tray>

Fan the paper stack and place itback on the Tray.

EP1085 5-9


Call-Tech.-Rep. Indicator

When a malfunction occurs in the copier, the Call-Tech.-Rep. Indicatorlights up and the corresponding malfunction code appears across theZoom Ratio Indicator and Multi-Copy Display. At this time, you cannotstart a new copy cycle.

If this happens, try to clear the Call-Tech.-Rep. Indicator by following theinstructions below. If the Call-Tech.-Rep. Indicator lights up again, callyour Technical Representative immediately.

Resetting the Call-Tech.-Rep. Indicator

Open the Front Door, then close it. Thiswill reset the Call-Tech.-Rep. Indicator.

NOTE

� Carry out this procedure with thePower Switch turned ON.

If the Call-Tech.-Rep. Indicator lights up again, call your TechnicalRepresentative immediately.

NOTE

� When calling your TechnicalRepresentative, give him or her themalfunction code shown across theZoom Ratio Indicator and Multi-Copy Display. Example: This is themalfunction code C0010

A 100%

Meter Count

Toner


%50%~200%

Auto

Lighter Darker

BookPhoto

Auto/Photo


A3 @ @A4 @ @ B4A4 @ @ FLS.A5 @ @ Inch

50%~200%

1139O4960A

1139O4970A

Example:Malfunction codeC0010

5-10 EP1085

I.U. Service Life Indicator Lights Up
When the time is about to come whenthe Imaging Unit needs replacement,the I.U. Service Life Indicator startsblinking to prompt you to replace it witha new one.

Replace the Imaging Unit by followingthe procedure given below.

When 2,500 more copies are made with the Add Toner Indicator lightingup, or 7,500 more copies are made after the I.U. Service Life Indicator hasstarted blinking, the I.U. Service Life Indicator lights up steadily and thecopier inhibits the initiation of a new copy cycle. See the diagram below.

Useful TipReplace the Imaging Unit as soon as possible once the I.U. ServiceLife Indicator has started blinking.

1142O174CA

1139O5330A

Blinking

After 2.500copies

Add Tonerindicator lights

Which occursfirst

5.000 copiesmade

No new copycycle can beinitiated

EP1085 5-11


Precautions for Handling

� Do not leave the I. U. in a brightplace.

� Do not store the I. U. in a hot placeof 40°C (104°F) or more.

� Do not store the I. U. in a humidplace or subject to water splash.

� Do not store the I. U. upside down ortitled.

Do not subject the I. U. to vibration.

5-12 EP1085

Removing the I. U. from the copier
1 Open the Front Door. Turn the LockRelease Lever counterclockwise toswing up the Upper Half of thecopier.

2 Turn the I. U. Lock Release Leverand, while holding it down, pull the I.U. halfway out of the copier.

3 Firmly grasp the I. U. with bothhands and pull it all the way out ofthe copier.

EP1085 5-13


Unpacking the I. U.

1 Peel off the tape and open the Box.

2 Take the Starter Bottle and the I. U.in its bag out of the Box.

Setting up the I. U.

1 Take the I. U. out of the bag.

2 Peel off the three pieces of tape andpacking materials.

Starter Bottle

I. U.

5-14 EP1085

3 Carefully pull the polyester tape
from the I. U..

4 Remove the Cap from the I. U. andre-fit it to the used I. U. as shown inthe illustration.

5 Align the I. U. with the rails in thecopier.

6 Slide the I. U. all the way into thecopier.

7 Be sure to push the I. U. into thelocked position until a click is heard.Then, check the position of the LockRelease Lever, as shown in theillustration.

EP1085 5-15


NOTE

� An improperly installed I. U. could be a cause of copier malfunction.

8 Lower the Upper Half of the copierand push it into the locked positionby pushing down on the portionmarked with “Push Down HereOnly”.

Charging the Copier with Starter and Toner

1 Swing out the Bottle Holder.

2 Holding the Starter Bottle so that itstab is on the upper side, shake itwell.

NOTE

� Make sure that “MT starter 104” isprinted on the Starter Bottle.

5-16 EP1085

3 Peel off the tape from the Starter
Bottle.

4 Align the markings on the StarterBottle with the upper side of theBottle Holder and slide the Bottleinto position.

NOTE

� Insert the Bottle all the way into the copier until the marking on theBottle is aligned with the marking on the Bottle Holder.

5 Then, swing in the Bottle Holderuntil it locks into position. Close theFront Door.

6 Plug the Power Cord into the walloutlet and turn ON the PowerSwitch. This will cause the waitindicator to be shown on the controlpanel.

EP1085 5-17


7 The copier automatically starts thecharging cycle for approximately 5minutes.

� During this cycle, do not openthe Front Door.

During this cycle, six segments ofthe ones digit LED on theMagnification Ratio Indicatorforming a “0” light up and go out oneafter another, indicating that thecopier is being charged with starter.

When the copier has beencompletely charged with Starter, theindication on the MagnificationRatio Indicator changes to “100”and the cycle stops.

8 If “E1” or “E2” is indicated on theMagnification Ratio Indicator, thetape has not been removed from theStarter Bottle. Swing down the FrontDoor and remove the tape andperform the starter chargingprocedure again.

If “E1” or “E2” is indicated again callyour Technical Representative.

9 Swing down the Front Door, swingout the Bottle Holder and removethe Starter Bottle.

10Tap the new Toner Bottle on a hardsurface, such as a desk, severaltimes. Then, turn the Toner Bottleover and tap it several times againin the same manner.

5-18 EP1085

11Hold the Toner Bottle so that its tab
is on the upper side, shake it welland peel off the tape.

Once the tape has been removed,hold the Bottle so that its toner portfaces up.

12Align the markings on the TonerBottle with the upper side of theBottle Holder and slide the Bottleinto position.

NOTE

� Insert the Bottle all the way into the copier until the marking on theBottle is aligned with the marking on the Bottle Holder.

13Then, swing in the Bottle Holderuntil it locks into position and closethe Front Door.

EP1085 5-19


5-20 EP1085

Troubleshooting 6

6 Troubleshooting

6.1 When this Type of Copy is Produced

Symptom Possible Cause Action

The image is toolight.

The exposure level for the AutoExposure Mode is set at one ofthe “Light” levels.

Change the setting in the User’sChoice Mode U-13 (Default AutoExposure Level), see page 4-7.Cancel the Auto Exposure Modeand select the Manual ExposureMode to adjust the exposurelevel and obtain a darker image,see page 3-10.

The manual exposure level is seton the lighter side.

Press the Exposure Control Key(Darker) as necessary to obtaina darker image, see page 3-10.

You have been making copiesfrom a photo or an original with alarge dark area.

The copier needs more toner.Press the Auxiliary TonerReplenishing Key as many timesas required to obtain the desiredimage density, see page 4-3.

The Toner Bottle has just beenreplaced.

The copier needs more toner.Press the Auxiliary TonerReplenishing Key as many timesas required to obtain the desiredimage density, see page 4-3.

The Add Toner Indicator on theMonitor Display is lit up.

Add Toner Indicator

Replace the Toner Bottle with anew one, see page 5-2.

The paper is damp. Replace the paper,see page 5-4.

The image is toodark.

The exposure level for the AutoExposure Mode is set at one ofthe “Dark” levels.

Change the setting in the User’sChoice Mode U-13 (Default AutoExposure Level), see page 4-7.Cancel the Auto Exposure Modeand select the Manual ExposureMode to adjust the exposurelevel and obtain a lighter image,see page 3-10.

The manual exposure level is seton the darker side.

Press the Exposure Control Key(Lighter) as necessary to obtaina lighter image, see page 3-10.

The entire surface of the OriginalGlass is dirty.

Wipe the Original Glass cleanwith a soft dry cloth,see page 8-3.

The original is not held tightly onthe Original Glass.

Place the original in position sothat it is held tightly against theOriginal Glass, see page 3-4.

EP1054 6-1

6 Troubleshooting

The copy is blurry. The paper is damp. Replace the paper,see page 5-4.

The copy has lines The Corona Units are dirty. Using the Corona Unit CleaningLevers, clean the Corona Units,see page 8-4.

The copy has darkspecks or spots.

The Original Glass is dirty. Wipe the Original Glass cleanwith a soft dry cloth,see page 8-3.

The Original Pad or DocumentFeed Belt is dirty.

Wipe the Original Pad clean witha soft cloth dampened with mildhome detergent, see page 8-2

The original is very thin or highlytransparent.

Place a blank sheet of paperover the original, see page 3-4.

The original is two-sided. The information on the back sideof a two-sided, thin original maybe slightly reproduced on thecopy. Set the copier into theManual Exposure Mode and,using the Exposure Control Key(Lighter), make the exposurelevel lighter, see page 3-10.

The edge of the copyis dirty.

The Original Pad is dirty. Wipe the Original Pad clean witha soft cloth dampened with mildhome detergent, see page 8-2.

A paper size larger than theoriginal is loaded in the Drawer.(Zoom Ratio is set at full size100%.)

Load the same size copy paperas the original into the Drawer,see page 5-4.Load the same size copy paperonto the Manual Bypass Tray orthe Multi Bypass Tray, see page3-13.

The original is not placed in thecorrect direction. (Zoom Ratio isset at full size 100%.)

Reload the paper in the samedirection as the original, seepage 3-4.

The reduction ratio selected isnot in accordance with the copypaper size. (When doing manualreduction copying.)

Select the zoom ratio accordingto the copy paper size, see page3-7.


6-2 EP1054

Troubleshooting 6

If these procedures do not correct the problem, contact your TechnicalRepresentative

6.2 The Copier is not functioning as designed

Turn the copier OFF immediately, unplug the power cord, and call yourTechnical Representative.

The image on thecopy is not alignedproperly.

The original is not placed in thecorrect position.

Place the original correctly onthe Original Glass against theOriginal Width Scale, see page3-4.

Symptom Check for Action

None of the Control PanelIndicators light up.

Is the Start Key lit up green? The copier is in the EnergySaver Mode. Press any Keyon the Control Panel tocancel the Energy SaverMode, see page 2-12.

The copier is in the AutoShut OFF Mode.

Turn the Power Switch ON.

Pressing the Start Key doesnot start the copy cycle.

Is the Start Key blinkingOrange?

The copier is now warmingup. Please wait,see page 2-11.

Is any of the followingIndicators lit up?

Take the necessary steps foreach Indicator,see page 5-1.

The Copier is not activatedwhen the Power Switch isturned ON.

Is the power cord pluggedinto the power outlet?

Plug the power cord into thepower outlet.

Is the room circuit breakeropen?

Close the room circuitbreaker.


1139O3910A 1139O3270A 1139O3

EP1054 6-3

6 Troubleshooting

6-4 EP1054

Specifications 7

7 Specifications

Copier EP1085Specification

Type Desk Top Copier

Platen Type Stationary

Photoconductor OPC

Copying System Electrostatic Dry Powdered Image Transfer to Plain Paper

Developing System Micro-Toning System

Fusing System Lamp-Heated Roller

Types of Original Sheets, Books, and other three-dimensional objectsMaximum Original Size: A3 LengthwiseMaximum Original Weight: 3kg.

Kinds of Paper Plain paper, Recycled paper: Weighing 60g/m2 to 90g/m2

Special paper (Manual Bypass Table only)� Thick paper weighing: 91g/m2 to 157g/m2

� OHP transparencies� Translucent paper

Copy Paper Size � Drawer:A3L, B4L, A4L, A4C, B5C, A5L, 8” x 13”L, 8-1/2” x 13”L, 8-1/4” x 13”L (When the Marketing Area Switch is flipped to“Inch”)11” x 17” L, 5-1/2” x 8-1/2” L, LEGAL L, LETTER L

� Manual Bypass TrayCrosswise: 100mm to 297mmLengthwise: 140mm to 432mm

� Lost image:1-sided copy in the Full size modeLeading edge: 3 mm (approx. 1/8”)Trailing edge: 3 mm (approx. 1/8”)Front edge: 1 mm (approx. 1/25”)

Paper Feeding System Automatic feeding from a drawer and manual feeding viaManual Bypass Tray or Multi Bypass Tray (option)Drawer: 250 sheets

Warming-up Time 30 seconds or less at Ambient temperature of 23°C/73°F(20 seconds or less when the Energy Saver Mode is used)

First copy Time A4C = 7.2 seconds or less(in Full Size Mode using First Copier Drawer)

Copying Speed(approx. copies/minute)

DrawerFull size (100%)A3L: 12 B4L: 13A4L: 15 A4Y: 15

Zoom Ratios Fixed ratiosFull size: 1:1±0.5%Reduction Ratios: 50%, 70%, 81%Enlargement Ratios: 115%, 141%, 200%Zoom ratios: From 50% to 200% in 1% increments

EP1054 7-1

7 Specifications

Multi Bypass Tray MB-4

Multiple Copy Up to 99 copies (Count-Down system)

Exposure Control Auto, Manual and Photo Mode

Power Requirements AC 115V, 120V, 127V, AC 220V-240V, 50/60Hz

Power Consumption 1.3 kW (Max.)

Dimensions Width: 610mm (Excluding Exit Tray)Depth: 637mmHeight: 401mm (Including Original Cover)

Weight 50 kg(Excluding Copy Tray, Starter, Toner)

Specification

Type Universal Multi-Sheet Bypass Unit

Installation Attached to copier

Registration Front edge

Capacity of Table � Plain Paper (white): 50 sheets (80g/m2) or less� Plain Paper (once-copied paper): 20 sheets or less� Recycled Paper, Thick paper, translucent paper:

20 sheets or less� OHP transparencies: 5 sheets or less

Kinds of Paper � Plain paper, Recycled paper: weighing 60g/m2 to 90g/m2

� Special paperThick paper: weighing 90g/m2 to 157g/m2

OHP TransparenciesTranslucent paper

Paper Size Standard: A3L to A6LNon-standard: Crosswise: 100mm to 297mmLengthwise: 140mm to 432mm

Power Source DC24V supplied from copier

Power Consumption 30W or less

Weight 2.7 kg

Specification

7-2 EP1054

Miscellaneous 8

8 Miscellaneous

8.1 Care of the CopierTo keep your copier in good shape at all times, make the following dailychecks and cleaning.

Daily Checks

Power Cord, Communications Cable, Ground Cable

Communications Cable: Cable connecting the copier with options

Original Glass

Original Cover, Automatic Document Feeder

Item Action

Is the copier placed on its power cord orother Cables?

It could result in the copier or other electricalequipment malfunctioning. Move the copierimmediately.

Is the copier placed on cables of otherelectrical equipment?

Are the cord and cables free of damage orcracks?

Turn the copier OFF immediately, unplug thepower cord, and call your TechnicalRepresentative.

Has the cord or cable jacket frayed to exposethe wires?

Item Action

Is the Glass dirty? Clean the Glass using the procedure given in“Cleaning”, see page 8-3.

Is the Glass scratched? Call your Technical Representative.

Is the Glass cracked or chipped?

Item Action

Is the Original Pad dirty? Clean the Pad using the procedure given in“Cleaning”, see page 8-2.

Is the Original Pad scratched? Call your Technical Representative.

EP1054 8-1

8 Miscellaneous

Copy Paper

Sound of Copier Operation

Copier Housing Temperature

Cleaning

Housing

Wipe the surface of the Housing cleanwith a soft cloth dampened with mildhome detergent.

Original Pad


2 Wipe the surface of the Original Padclean with a soft cloth dampenedwith mild home detergent.

Item Action

Is the paper damp and wavy? Replace the paper, see page 5-4.

Item Action

Is there any unusual noise heard while thecopier is running?

Call your Technical Representative.

Item Action

Is the housing temperature inordinatelyhigh?

Call your Technical Representative.

8-2 EP1054

Miscellaneous 8
Original Glass

2 Wipe the surface of the OriginalGlass clean with a soft, dry cloth.

Control Panel

1 Turn the Power Switch OFF.

2 Wipe the surface of the controlpanel clean with a soft, dry cloth.

NOTE

� NEVER use a glass cleaner or any other detergent to avoid damageto the control panel keys and display.

Front Door

1 Swing down the Front Door.

2 Wipe the inside of the Front Doorclean with a soft cloth.

EP1054 8-3

8 Miscellaneous

Corona Units

1 Open the Front Door

2 Gently slide out the Upper CoronaUnit Cleaning Lever as far as it willgo.

3 Gently slide the Cleaning Leverback into the original position.

4 Gently slide out the Lower CoronaUnit Cleaning Lever as far as it willgo.

5 Gently slide the Cleaning Leverback into the original position.

6 Repeat steps 2 to 5 two to threetimes.

8-4 EP1054

Miscellaneous 8

8.2 Paper Size and Zoom Ratio Table

Paper Size

Name Size (Metric) Size (Inch)

A 3 297mm x 420mm 11-3/4” x 16-1/2”

A 4 210mm x 297mm 8-1/4” x 11-3/4”

A 5 148mm x 210mm 5-3/4” x 8-1/4”

A 6 105mm x 148mm 4-1/4” x 5-3/4”

B 4 257mm x 364mm 10” x 14-1/4”

B 5 182mm x 257mm 7-1/4” x 10”

B 6 128mm x 182mm 5” x 7-1/4”

Post Card 100mm x 148mm 4” x 5-3/4”

Name Size (Inch) Size (Metric)

LEDGER 11” x 17” 279mm x 432mm

11” x 14” 11” x 14” 279mm x 356mm

COMPUTER 10-1/8” x 14” 257mm x 356mm

10” x 14” 10” x 14” 254mm x 356mm

9-1/4” x 14” 9-1/4” x 14” 236mm x 356mm

LEGAL 8-1/2” x 14” 216mm x 356mm

Foolscap GOVERNMENTLEGAL

8-1/2” x 13” 216mm x 330mm

Foolscap 8” x 13” 203mm x 330mm

Foolscap 8-2/3” x 13” 220mm x 330mm

Foolscap FOLIO 8-1/4” x 13” 210mm x 330mm

8-1/4” x 11-3/4” 8-1/4” x 11-3/4” 210mm x 301mm

LETTER 8-1/2” x 11” 216mm x 279mm

GOVERNMENTLETTER

8” x 10-1/2” 203mm x 267mm

QUARTO 8” x 10” 203mm x 254mm

STATEMENT INVOICE 5-1/2” x 8-1/2” 140mm x 216mm

EP1054 8-5

8 Miscellaneous

Zoom Ratio Table (Original Size to Copy Paper Size)

Zoom Ratio = Copy Paper Size + Original Size

� 1” (inch) = 25.4 mm

� 1mm = 0.0394” (inch)

Metric Areas

Original Size Copy Paper Size Zoom Ratio

A 3297 x 420mm11-3/4” x 16-1/2”

A 4 x 0.707

A 5 x 0.500

B 4 x 0.866

B 5 x 0.610

A 4210 x 297mm8-1/4” x 11-3/4”

A 5 x 0.707

A 6 x 0.500

B 5 x 0.866

B 6 x 1.224

A 3 x 1.414

B 4 x 1.224

A 5148 x 210mm5-3/4” x 8-1/4”

A 6 x 0.707

B 6 x 0.866

A 4 x 1.414

A 3 x 2.000

B 4 x 1.733

B 5 x 1.224

A 6105 x 148mm4-1/4” x 5-3/4”

A 4 x 2.000

A 5 x 1.414

B 5 x 1.733

B 6 x 1.224

B 4257 x 364mm10” x 14-1/4”

A 4 x 0.816

A 5 x 0.577

B 5 x 0.707

B 6 x 0.500

A 3 x 1.154

8-6 EP1054

Miscellaneous 8

B 5182 x 257mm7-1/4” x 10

A 5 x 0.816

A 6 x 0.577

B 6 x 0.707

A 3 x 1.640

A 4 x 1.154

B 4 x 1.414

B 6128 x 182mm5” x 7-1/4”

A 6 x 0.816

A 4 x 1.640

A 5 x 1.154

B 4 x 2.000

B 5 x 1.414

Inch Areas


11” x 17”279.4 x 431.8mm

11” x 14” x 0.823

Legal x 0.772

Foolscap x 0.764

Letter x 0.647

Invoice x 0.500

11” x 15”279.4 x 381mm

11” x 14” x 0.933

Legal x 0.772

Foolscap x 0.722

Letter x 0.733

Invoice x 0.500

11” x 14”279.4 x 355.6mm

Legal x 0.772

Foolscap x 0.772

Letter x 0.772

Invoice x 0.500

Legal8-1/2” x 14”215.9 x 355.6mm

Legal x 0.928

Foolscap x 0.785

Letter x 0.607

Invoice x 1.214

Metric Areas


EP1054 8-7

8 Miscellaneous

Foolscap8-1/2” x 13”215.9 x 330.2mm

Foolscap x 0.846

Letter x 0.647

Invoice x 1.294

11” x 17” x 1.076

Letter8-1/2” x 11”215.9 x 279.4mm

Invoice x 0.647

11” x 17” x 1.294

11” x 14” x 1.272

Invoice5-1/2” x 8-1/2”139.7 x 215.9mm

11” x 17” x 2.000

11” x 14” x 1.647

Legal x 1.545

Foolscap x 1.529

Letter x 1.294

Inch Areas


8-8 EP1054

AAdd Paper Indicator ............................................................................................5-4Add Toner ...........................................................................................................5-2Add Toner Indicator ............................................................................................5-2Adding Paper ......................................................................................................5-4Auto Exposure Mode ................................................................................ 3-9, 3-10Auto Panel Reset ON/OFF .................................................................................4-9Auto Reset Function .........................................................................................2-14Auto Shut OFF Timing ......................................................................................4-10

BBook Copying ...................................................................................................3-11

CCall-Tech.-Rep. Indicator .................................................................................5-10Cleaning .............................................................................................................8-2Closure Failure Indicator ....................................................................................5-6Condensation .....................................................................................................4-4Control Panel ......................................................................................................2-6Corona Unit Cleaning Lever ...............................................................................8-4

DDaily Checks ......................................................................................................8-1Default auto exposure level ................................................................................4-7Description of Copy Paper Size .........................................................................8-5Display ................................................................................................................2-8Drum Dehumidifier Function ...............................................................................4-4

EEnergy Saver Mode ..........................................................................................2-12Energy Saver ON Timing .................................................................................4-10Enlargement .......................................................................................................3-8Enlargement Ratios ............................................................................................3-8

FFixed Zoom Ratios .............................................................................................3-7Full Size ..............................................................................................................3-8Full Size Copy ....................................................................................................3-8

II. U. Service Life Indicator ........................................................................ 2-9, 5-11Initial Mode .......................................................................................................2-13

EP1054 IX-1

MManual Bypass Copying .................................................................................. 3-13Manual Exposure Mode .................................................................... 3-9, 3-10, 4-8Misfeed Indicator ............................................................................................... 5-7Multi Bypass Copying ...................................................................................... 3-14

NNon-Auto Shut OFF ........................................................................................... 4-6

OOriginal Placement ............................................................................................ 3-4

PPanel Resetting ............................................................................................... 2-13Paper Size ......................................................................................................... 3-6Paper, Add ......................................................................................................... 5-4Photo Mode ..............................................................................................3-9, 3-10Placing Originals ................................................................................................ 3-4Power Switch ................................................................................................... 2-11

RReduction ratios ................................................................................................. 3-7Replacing the Toner Bottle ................................................................................ 5-2

SSize Counter ...................................................................................................... 4-1

TToner Replenisher Function .............................................................................. 4-3Toner, Add ......................................................................................................... 5-2Total Counter ..................................................................................................... 4-1Total Number of Copies Mode ........................................................................... 4-1

UUser’s Choice .................................................................................................... 4-6

ZZoom Ratio ........................................................................................................ 3-7Zoom Ratio Table .............................................................................................. 8-6

IX-2 EP1054

Copiator Konica Minolta EP 1054

Documents

mild home

rear left

drum dehumidifier

manual bypass

provide good

desired exposure

manual bypass

service life