cooper lighting - lumark

Indoor/OutdoorProduct Catalog

Industrial

Commercial

Floodlighting

Wall Mount

Outdoor Area / Site

Motion Activated

Worklights

ENERGY INDEPENDENCE& SECURITY ACT (EISA)

LUMARK combines craftsmanship and affordability in its full line of commercial and industrial high intensity discharge (HID) and compact fluorescentlighting products.

HID lighting applications often involve tasks, environments and surfaces of varying and demanding degrees.

LUMARK has the experience and product line to properly illuminate such complex applications; providing superior lighting for supermarkets, factories, warehouses and other industrial and commercial applications.

From industrial products to flood, motion activated, worklights and area lighting, Lumark answers difficult illumination problems with a wide range of quality products and superior technical support.

Products

COOPER LIGHTING

FE

DE

RA

L E

NE

RG

Y IN

DE

PE

ND

EN

CE

& S

EC

UR

ITY

AC

T (E

ISA

)

COOPER LIGHTING

COOPER LIGHTING - LUMARK

The Federal Energy Independence & Security Act (EISA) signed into law in late 2007 states that all 150W – 500W metal halide lamp luminaires manufactured on or after January 1, 2009, must meet the following ballast efficiency ratings:

• 88% for magnetic or electronic pulse start ballasts• 94% for magnetic probe-start ballasts• 90% for electronic non-pulse start ballasts of 250W or less• 92% for electronic non-pulse start ballasts greater than 250W

In addition to improved operating efficiency, there are several benefits to pulse start metal halide technology including:

More Lumens Per Watt: Pulse start metal halide systems improve lamp efficacy (lumens per watt) by up to 45%, resulting in more useable light per watt consumed.

Longer Life:Pulse start lamps offer substantially higher life ratings—up to 20,000-30,000 hours, or an improvement of up to 50%.

Better Lumen Maintenance:With a lumen maintenance rating of up to 75%, pulse start lamps reduce light loss over life by up to 15% when compared to probe start metal halide lamps. Fewer watts per square foot are required to illuminate an area as a result of consistently higher light levels throughout lamp life.

Faster Warm-Up / Quicker Restrike:Warm up time is cut in half to 2 minutes for pulse start systems versus 15-20 minutes for probe start metal halide. Restrike times after an outage are reduced to 3 to 4 minutes for pulse start lamps.

Probe vs. Pulse Start Metal Halide BenefitsPulse MH

Brighter White90-11070-75%35-1000

6-30

Features Probe MHColor WhiteEfficacy (Lumens per Watt) 60-85Lumen Maintenance 65%Lamp Wattages 175-1000Lamp Life (kHrs) 6-16

25-45% Improvement in Lumens Per Watt

120

60

80

100

Probe Start60-85W

Pulse Start90-110W

Initi

al L

umen

s Pe

r Wat

t

Increased Lumen Maintenance

Lum

en M

aint

enan

ce (%

)

Lamp Life—Hours (000’s)

Pulse Start

Up to 15% Improvement

Probe Start

100

80

60

40

0 3 5

65%

75%

7 9 11 13 15 17 20

20

Federal Energy Independence & Security Act (EISA)Benefits of Pulse Start Metal Halide

Faster Warm-Up / Quicker Restrike

Minutes to Warm Up / Restrike

PulseStart

ProbeStart

0 2 4 6 8 10 12 14 16 18 20

Warm Up (2 Minutes)

Restrike (3-4 Minutes)

Warm Up (4 Minutes)

Restrike(15-20 Minutes)

TA

BLE

OF C

ON

TE

NT

S

COOPER LIGHTING1

COOPER LIGHTING - LUMARKI N D U S T R I A L | D E C O R A T I V E H I G H - B A Y S | A L U M I N U M H I G H - B A Y S

CML LumaWatt IRMD LumaWatt IRMS LumaWatt OPTIONS + Industrial HID Industrial HID Individual Fixture ACCESSORIESDimming System Dimming System Control Option • Descriptionsp.39 Motion Detector p.41 • Option Capability Matrix

p.40 p.42-46

| O P T I O N S + A C C E S S O R I E S| I N D U S T R I A L C O N T R O L S

EP Enterprise 22 & 28 RB Low-Bay VF Vertimark BE Vertimark II SG 16" & 21" Prismatic GB 16" & 21" Prismatic SE 16" & 21" E&G p.19 Benchmark p.21 p.22 Glass High-Bay Glass Benchmark Glass Steeler

p.20 p.23 p.24 p.25

| P R I S M A T I C G L A S S H I G H - B A Y S

| P R I S M A T I C A C R Y L I C H I G H - B A Y S , L O W - B A Y S + C O M P A C T F L U O R E S C E N T

EB 16" & 21" E&G SS 16", 22" & 25" HB 16", 22" & 25" SE 22" E&G Prismatic EB 22" E&G Prismatic SS 22" Enhanced HB 22" EnhancedGlass Benchmark Prismatic High-Bay Prismatic Benchmark Acrylic Steeler Acrylic Benchmark Refractor High-Bay Refractor High-Bayp.26 p.27 p.28 p.29 p.30 Steeler Benchmark

p.31 p.32

AII Avid Mini AIS Avid Small AIM Avid Medium AIL Avid Large SS 15", 18" & 23" HB High-Bay SE 18" & 23" p.5 p.6 p.7 p.8 Steeler Benchmark E&G Steeler

p.9 p.10 p.11

EB 18" & 23" UB Benchmark Uplight SS Econoliter SS VertX HB VertX SE E&G VertX EB E&G VertXE&G Benchmark p.13 p.14 p.15 p.16 p.17 p.18p.12

LX 22" & 25" Prismatic XB 22" & 25" Prismatic DP Axio Series IC Vaportight VS Vaportight Small VL Vaportight LargeDirect-Mount Steeler Direct-Mount [Compact Fluorescent] p.36 p.37 p.38p.33 Benchmark p.35

p.34

| A L U M I N U M + A C R Y L I C L O W - B A Y S

| V A P O R T I G H T S

TA

BLE

OF C

ON

TE

NT

S

COOPER LIGHTING 2


QC Quadra-Mark QP Quadra-Lume QF Quadra-Lume QD Quadra-Lume CL/CS Canopy PR Parker PD Park-Kingp.47 p.48 p.49 p.50 p.51 p.52 p.53

| C O M M E R C I A L

QZ Wedge LQL1500 SF Falcon XF Falcon MS Impact Flood MM Impact Flood WR Warriorp.54 Quartz Flood p.55 p.56 Small Medium p.59

p.54 p.57 p.58

NK Nighthawk III LP Low-Profile XL Eagle AS AllStar OPTIONS + p.60 Floodlight p.62 p.63 ACCESSORIES

p.61 p.64-65

| F L O O D L I G H T I N G

| C A N O P Y

TA

BLE

OF C

ON

TE

NT

S

COOPER LIGHTING3


IP Impact Wedge IP / IPTM Impact IP / IPCM Impact Cylinder IP Impact Quarter Sphere WL Wal-Pak MN MON-2 M4 MON-4p.66 Trapezoid p.69-70 p.71 p.72 p.73 p.74

p.67-68

| W A L L M O U N T

WM Wal-Lite WM Wal-Lite Glass WP Wal-Eye GP Glass-Pak GS Super Smokey VR Smokey MP Micro-Pakp.75 p.76 p.77 p.78 p.79 p.80 p.81

Wally Cutoff Wally Z-Pak Cutoff Z-Pak OPTIONS +p.82 p.82 p.83 p.83 ACCESSORIES

p.84

TA

BLE

OF C

ON

TE

NT

S

COOPER LIGHTING 4

COOPER LIGHTING - LUMARK| O U T D O O R A R E A / S I T E

Eternalume Area Light TR Tribute PFT Tribute and Pole RY Roadway Cobrahead RS Roadway Small RL Roadway Large RC Roadway Smallp.85 p.86 Combo p.89 Cobrahead Cutoff Cobrahead Cutoff Cobrahead

p.87-88 p.90 p.91 p.92

MC High Mast Industrial MX High Mast IndustrialArea Luminaire Area Luminairep.93 p.94

| M O T I O N A C T I V A T E D

MS35 / MS37 MS245R / MS245RW MS240p.95 p.95 p.95

| W O R K L I G H T S

SS Steeler Worklight SSD/DD/IR p.96 Docklight

p.97

| P R O B E - P U L S E S T A R T M E T A L H A L I D E L A M P C R O S S R E F E R E N C E 9 8 - 1 1 0

| N U M E R I C A L I N D E X 1 1 1 - 1 1 3

IND

US

TR

IAL

COOPER LIGHTING5


• Cast aluminum top can bespecified for pendant orsuspension mounting

• Pendant mounting comeswith 3/8" pipe with internal locking screw

• Suspension mounting hastwo (2) stainless steel suspension cables withquick adjustment enabling the luminaire to be quickly leveled

• Integral ballast housingconsists of heat dissipatingaluminum finned construction

• Cast aluminum midsectionis designed to dissipate theheat energy away from thelamp compartment separating the optical cavity from the integral ballast housing assuring a cool operation

• Optical construction is designed to remain flexibleproviding multiple distributions and opticaltypes

• Approximate net weight: 8 lbs. (3.6 kgs.)

AIIAVID MINI

D I M E N S I O N S

I N T E G R A L M O U N T

D E S C R I P T I O N

AVID Series delivers a scalable aesthetically pleasing family of luminaires that combines the needsof lighting designers, architects, andbuilding owners of architecturalform providing great lighting performance in interior spaces. This rugged luminaire design considers multiple mounting configurations integrating a vastarray of lamp sources and ballasttechnologies allowing specificationsto combine one style for many interior application needs.

O R D E R I N G I N F O R M A T I O N

S A M P L E N U M B E R : A I I - 3 9 - M H - 1 2 0 - G 7 - N - I - S C - G M

20-39WP u l s e S t a r t M e t a l H a l i d e

7-13WC o m p a c t F l u o r e s c e n t

25WI n c a n d e s c e n t

D E C O R A T I V E H I G H - B A Y L U M I N A I R E Product

FamilyAII=Avid

Series Mini 1

Voltage120=120VX=Incandescent

Lamp WattageHID 2

20=20WT4.5 G8.539=20WT4.5 G8.5Compact Fluorescent7=7W13=13WIncandescent25=25

Distribution 4

N=NarrowW=WideX=Fixed

Position 5

Mounting OptionsPendant 6

P=Pendant Mount 7

CableSC=Cable Mount

w/ StraightPower Cord(StandardLength 120") 8

CC=Cable Mountw/ CoiledPower Cord(StandardLength 4'-10') 8

FinishBK=BlackAP=GreyBZ=BronzeWH=WhiteDP=Dark

PlatinumGM=Graphite

Metallic

OptionsF1=Single

FuseLL=Lamp

IncludedFGS=Frosted

GlassLens

CGL=ClearGlassLens

DFR=DecorativeFrostedRing

AccessoriesAII-I-PXX-XX=Mini

Pendant Kitfor IntegralBallast Housing 9

BallastHousingI=Integral

Optical SystemBorosilicate GlassG7=7" Glass

RefractorSG7=7" Shroud

w/Glass Refractor

AluminumA7=7" Performance

Reflector 3

S7=7" Shroud

Lamp TypeMP=Pulse Start Metal HalideCF=Compact FluorescentIN=Incandescent

NOTES: 1 Avid Series Mini “AII” is 120V only. 2 Must specify FGS or CGL. 3 Shroud comes standard with Performance Reflector. 4 Mini available only in Narrow and Wide distributions. 5 Specify X for lamp type CF. 6 Pendant dimensions refer to the distance from the mounting plane to the bottom of the fixture. 7 Must order pendant kit separately, see accessories for ordering information. 8 Specify W for white cord, example: SCW. 9 Specify distance frommounting plane to the bottom of the fixture and finish. (Example: AII-I-P24-GM). 10 Specifications and dimensions subject to change without notice.

6 7/8"[176mm]

11"[279mm]

8 1/16" [205mm]

9/16"[15mm]

3 3/4"[95mm]

36"*[279mm]

NOTE: *See accessories for ordering information for pendant kit. Pendant kit dimension based on distance from mounting plane to the bottom of the fixture.

Lamp Type WattagePulse Start Metal Halide (MP) 20, 39WCompact Fluorescent (CF) 7, 13WIncandescent (IN) 25W

IND

US

TR

IAL

COOPER LIGHTING 6



• Pendant mounting comeswith 1/2" pipe with internal locking screw


• Integral ballast housing consists of heat dissipatingaluminum finned construction




AISAVID SMALL

D I M E N S I O N S






250WQ u a r t z H a l o g e n


D E C O R A T I V E H I G H - B A Y L U M I N A I R E


S A M P L E N U M B E R : A I S - 1 0 0 - M H - 1 2 0 - A 1 2 - M - I - S C - G M

Product FamilyAIS=Avid

Series Small

Voltage120=120V208=208V240=240V277=277VUNV=120-277V

Lamp WattageHID39=39W T6 G1250=50W

Medium-Base70=70W

Medium-Base100=100W

Medium-BaseCompact FluorescentX=Number of LampsX26=(1 or 2) 26WX32=(1 or 2) 32WX42=(1 or 2) 42WQuartz Halogen 1

250=250WIncandescent 1

200=200W

DistributionN=NarrowM=MediumW=WideX=Fixed

Position 3


P=Pendant Mount 5

CableSC=Cable Mount




PlatinumGM=Graphite

Metallic

OptionsF1=Single

FuseF2=Double

FuseLL=Lamp

IncludedFGS=Frosted

Glass LensCGL=Clear Glass

LensDFR=Decorative

FrostedRing

OR=Open RatedSocket

AccessoriesAIS-I-PXX-XX=Small

PendantKit for IntegralBallast Housing 7


Optical SystemBorosilicate GlassG12=12" Glass

RefractorSG12=12" Shroud w/Glass

RefractorAluminumA12=12" Performance Reflector 2

AcrylicAC12=12" Clear AcrylicSAC12=12" Shroud w/ Clear Acrylic

Lamp TypeMP=Pulse Start Metal HalideCF=Compact FluorescentIN=IncandescentQZ=Quartz Halogen

NOTES: 1 Cannot be used with AC12 Optic. 2 Shroud comes standard with Performance Reflector. 3 Specify X for lamp type CF. 4 Pendant dimension refers to thedistance from the mounting plane to the bottom of the fixture. 5 Must order pendant kit separately, see accessories for ordering information. 6 Specify W forwhite cord, example: SCW. 7 Specify distance from mounting plane to the bottom of the fixture and finish (Example: AIS-I-P24-GM). 8 Specifications and dimensions subject to change without notice.

14" [356mm]

11-3/8"[290mm]

20"[508mm]

11/16"[18mm]

6-1/2"[166mm]36"*

[279mm]


Lamp Type WattagePulse Start Metal Halide (MP) 39, 50, 70, 100WCompact Fluorescent (CF) (1) 26, (1) 32, (1) 42W

(2) 26, (2) 32, (2) 42WQuartz Halogen (QZ) 250WIncandescent (IN) 200W

IND

US

TR

IAL

COOPER LIGHTING7


• Pendant mounting comeswith 1/2" pipe with internal locking screw. Requires 4" octagonal J-box with fixture ratingthat exceeds 45 lbs




• Field adjustable socketbracket has three settingsconcentrated, medium, andwide


• HPF ballast with class H insulation minimum starting temperature is -30°C (-20°F) for MH, andMP


AIMAVID MEDIUM

150-250WP u l s e S t a r t M e t a l H a l i d e M e t a l H a l i d e



D I M E N S I O N S





S A M P L E N U M B E R : A I M - 1 7 5 - M H - M T - A 1 6 - M - I - P - G M

Product FamilyAIM=Avid

Series Medium

Voltage120=120V208=208V240=240V277=277V347=347V480=480VLamp Wattage

HID150=150W

Medium-Base175=175W

Mogul-Base250=250W

Mogul-BaseCompact FluorescentX=Number of LampsX26=(2 or 4) 26WX32=(2 or 4) 32WX42=(2 or 4) 42W


Position 3


P=Pendant Mount 5

CableSC=Cable Mount




PlatinumGM=Graphite

Metallic

OptionsQ=Quartz

Restrike(Hot Strike Only) 7

EM=Quartz Restrike w/ “Delay Relay” (Quartz lampStrikes at both hot and cold starts) 7

EM/SC=Emergency SeparateCircuit 7

F1=Single FuseF2=Double FuseLL=Lamp IncludedOR=Open Rated SocketFGS=Frosted Glass Lens 8

CGL=Clear Glass Lens 8

DFR=Decorative Frosted Ring

AccessoriesAIM-I-PXX-XX=Medium



Optical SystemBorosilicate GlassG16=16" Glass RefractorSG16=16" Shroud w/Glass


AcrylicAC16=16" Clear Acrylic 2

Lamp TypeMP=Pulse Start Metal HalideMH=Metal HalideCF=Compact Fluorescent

NOTES: 1 Shroud comes standard with Performance Reflector. 2 Rated for 25˚C ambient environments. 3 Specify X for lamp type CF. 4 Pendant dimension refers tothe distance from the mounting plane to the bottom of the fixture. 5 Must order pendant kit separately, see accessories for ordering information. 6 SpecifyW for white cord, example: SCW. 7 Quartz lamp 150W max. 8 Lens not available with Acrylic option. 9 Specify distance from mounting plane to the bottom of the fixture and finish (Example: AII-I-P24-GM). 10 Specifications and dimensions subject to change without notice.

36"*[279mm]

Performance Reflectorand Glass Refractor

Acrylic 18" [457mm]

14 7/16"[366mm]

26 5/8"[676mm]

7/8"[23mm]

26 7/8"[682mm]

8 1/8"[207mm]

Performance Reflectorand Glass Refractor

Acrylic


17 3/8" [441mm]

Lamp Type WattagePulse Start Metal Halide (MP) 175, 250WMetal Halide (MH) 150, 175, 250WCompact Fluorescent (CF) (2) 26, (2) 32, (2) 42W

(4) 26, (4) 32, (4) 42W


IND

US

TR

IAL

COOPER LIGHTING 8



• Pendant mounting comeswith 1/2" pipe with internal locking screw. Requires 4" octagonal J-box with fixture rating thatexceeds 60 lbs

• Suspension mouting hastwo (2) stainless steel suspension cables withquick adjustment enabling the luminaire to be quickly leveled



• Field adjustable socketbracket has three settingsconcentrated, medium, andwide


• HPF ballast with class H insulation minimum starting temperature is -30°C (-20°F) for MH, andMP


AILAVID LARGE


M e t a l H a l i d e



D I M E N S I O N S





S A M P L E N U M B E R : A I L - 4 0 0 - M H - M T - G 1 9 - M - I - P - G M

Product FamilyAIL=Avid

Series Large

Voltage120=120V208=208V240=240V277=277V347=347V480=480VLamp Wattage

HID250=250W

Mogul-Base320=320W

Mogul-Base350=350W

Mogul-Base400=400W

Mogul-BaseCompact FluorescentX=Number of LampsX26=(4 or 6) 26WX32=(4 or 6) 32WX42=(4 or 6) 42W


Position 2


P=Pendant Mount 4

CableSC=Cable Mount




PlatinumGM=Graphite

Metallic

OptionsQ=Quartz

Restrike(Hot Strike Only) 6

EM=Quartz Restrike w/ “Delay Relay” (Quartz lampStrikes at both hot and cold starts) 6

EM/SC=Emergency SeparateCircuit 6

F1=Single FuseF2=Double FuseLL=Lamp IncludedOR=Open Rated SocketFGS=Frosted Glass Lens 7

CGL=Clear Glass Lens 7

DFR=Decorative Frosted Ring

AccessoriesAIL-I-PXX-XX=Large



Optical SystemBorosilicate GlassG19=19" Glass RefractorSG19=19" Shroud w/Glass


Lamp TypeMP=Pulse Start Metal HalideMH=Metal HalideCF=Compact Fluorescent

NOTES: 1 Shroud comes standard with Performance Reflector. 2 Specify X for lamp type CF. 3 Pendant dimension refers to the distance from the mounting plane tothe bottom of the fixture. 4 Must order pendant kit separately, see accessories for ordering information. 5 Specify W for white cord, example: SCW. 6 Quartz lamp 150W max. 7 Lens not available with Acrylic option. 8 Specify distance from mounting plane to the bottom of the fixture and finish (Example: AIL-I-P24-GM). 9 Specifications and dimensions subject to change without notice.

17"[432mm]

29-15/16"[760mm]

7/8"[23mm]21 9/32" [540mm]

9-1/4"[235mm]

36"*[279mm]


Lamp Type WattagePulse Start Metal Halide (MP) 250, 320, 350, 400WMetal Halide (MH) 250, 400WCompact Fluorescent (CF) (4) 26, (4) 32, (4) 42W

(6) 26, (6) 32, (6) 42W

IND

US

TR

IAL

COOPER LIGHTING9

D I M E N S I O N S

• U.L. listed for damp locations. CSA certified.EISA Complaint

• Easy slide-on die-cast aluminum mounting box with tapped opening for3/4" conduit

• Heavy-duty, formed steelhousing with an open air ballast for cooler operation is finished in astandard white polyesterpowder paint

• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40° F) for HP and -30°C (-20° F) for MH, MP andML

• Universal ladder bracketsallow for the flexibility tochange out with other reflectors available inacrylic or glass

• Mogul-base porcelainsocket. 150W and belowis medium-base

• Computer-designed, field-adjustable reflectormounts easily and allows multiple distribution patterns for precise control

• Approximate net weight:30-37 lbs. (13-17 kgs.)


The Steeler combines computerized design, durablecold-rolled steel and a field-adjustable reflector to provide adegree of versatility unmatched inother industrials. U.L. listed andlabeled for damp location. CSACertified.

The Steeler is perfect for high-bayapplications such as gymnasiums,hangars, manufacturing, assembly and auto service areas.


S A M P L E N U M B E R : M P S S - S A 1 8 - M - 1 5 0 - M T - Q

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize asafety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory set forconcentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Productsalso available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information.88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.

15" [381mm]18" [487mm]23" [584mm]

Maximum Height is15"=24 1/8" [613mm]18"=26 7/8" [683mm]23"=31 3/4" [806mm]

See ordering information for details

Lamp TypeMP=Pulse Start

Metal Halide 1

MH=Metal Halide 1ML=Pulse Start Metal Halide

(Linear Reactor) 1, 2

HP=High Pressure Sodium


MetalHalide(CWA)

MH=MetalHalide

HP=High PressureSodium

SeriesSS=Steeler

Lamp Wattage25=250W32=320W35=350W40=400W40Q=400W

and Quartz Restrike

408=400W (Canada, Triple-Tap Ballast)

Option5T=5-Tap Ballast 1

OR=Open Rated

SeriesSS=Steeler

Reflector TypeSA=Anodized

Spun Aluminum

Reflector Diameter15=15"18=18"23=23"

Distribution 3

C=ConcentratedM=MediumW=Wide

Lamp WattageMP70=70W100=100W175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W 750=750W1000=1000W

MH175=175W250=250W400=400W1000=1000WHP70=70W100=100W150=150W250=250W400=400W600=600W750=750W

Voltage 4

120V208V240V277V347V480VMT=Multi-Tap

wired 277VTT=Triple-Tap

wired 347V5T=5-Tap 5

Options &Accessories(See Pages 42-46)

STOCK SAMPLE NUMBER: MPSS40

NOTES: 1 88% EISA complaint MP fixtures not available in 5-tap voltages.Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add options and accessories.

Reflector LampType Wattage

90°C55°C (450W + Up)65°C (70-400W)

SA15 70-450W

SA18 70-450W

SA23 400-1000W

SupplyWire (Min.)

AmbientEnvironment


SS15", 18" & 23"STEELER

70-1000WH i g h P r e s s u r e S o d i u mP u l s e S t a r t M e t a l H a l i d eM e t a l H a l i d e

H I G H - B A Y I N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 70, 100, 175, 200, 250, 320, 350

400, 450, 750, 1000WMetal Halide (MH) 175, 250, 400, 1000WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400, 600, 750W

Voltage ChartMT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)5T=5-Tap 120/208/240/277/480V (wired 277V)

IND

US

TR

IAL

COOPER LIGHTING 10


Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W 750=750W1000=1000W

MH175=175W250=250W400=400W1000=1000WHP250=250W400=400W600=600W750=750W

Voltage 4





D I M E N S I O N S



• Durable heavy-duty die-cast aluminum housing for lasting performance in the harshest environments. Integrally hinged for ease of maintenance withoptional toolless entry.Finished in a standardwhite polyester powderpaint

• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40° F) for HP and -30°C(-20° F) for MH, MP and ML


• Mogul-base porcelainsocket

• Approximate net weight: 35 lbs. (15 kgs.)


The Benchmark HB utilizes adurable heavy-duty die-cast aluminum ballast housing andcomputer aided designed reflectorsystem for specification-level performance at higher mountingheights. U.L. listed and CSA certified. Damp location standard.

The Benchmark HB is perfect forhigh-bay applications such asgymnasiums, hangars, manufacturing, assembly andauto service areas.

15" [381mm]18" [457mm]23" [584mm]

Maximum Height is 15"=27 11/16" [703mm]18"=29 3/16" [741mm]

23"=32 13/16" [833mm]See ordering information

for details

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 Not available with HSW, Q, EM, HL or HC options. 3 Factory set for concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Productsalso available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information.88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P H B - S A 1 8 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse

Start Metal Halide 1

MH=Metal Halide 1

ML=Pulse Start Metal Halide (Linear Reactor) 1, 2


SeriesHB=High-Bay

Benchmark

Reflector TypeSA=Anodized

Spun Aluminum

ReflectorDiameter15=15"18=18"23=23"

Distribution 3



105°C55°C (450W + Up)65°C (175-400W)

SA15 175-450W

SA18 175-450W

SA23 400-1000W

SupplyWire (Min.)

AmbientEnvironment

HBHIGH-BAY

BENCHMARK

175-1000WHigh Pressure Sodium

Pulse Start Metal HalideMetal Halide

D I E - C A S T A L U M I N U MH I G H - B A Y H E A V Y - D U T Y

I N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350

400, 450, 750, 1000WMetal Halide (MH) 175, 250, 400, 1000WHigh Pressure Sodium (HP) 250, 400, 600, 750W


IND

US

TR

IAL

COOPER LIGHTING11

D I M E N S I O N S




• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40°F) for HP and -30°C(-20°F) for MH, MP and ML

• Die-cast aluminum neckwith staggered mountingbosses for eight-positionadjustability of the socketwhich provides a varietyof distributions from concentrated to wide

• Clear tempered glass lensin an extruded aluminumdoor frame with stainlesssteel latches allows accessfor relamping withouttools


• Approximate net weight: 38-50 lbs. (17-23 kgs.)


The E & G Steeler utilizes theSA18 and SA23 reflector system for maximum performance. It features a die-cast aluminum neck for superior strength and an extrudedaluminum hinged and latcheddoor frame for access to the lampwithout tools. The E & G is fullyenclosed and gasketed at three (3) separate points to prevent entry ofexternal contaminants. U.L. listedand labeled for damp location.CSA Certified.

The E & G Steeler is perfect for textile mills, gymnasiums,hangars, assembly and auto service areas.



S A M P L E N U M B E R : H P S E - E N S A 1 8 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSE=E&G

Steeler

Reflector TypeENSA=Enclosed &

GasketedSpun Aluminum

ReflectorDiameter18=18"23=23"

Distribution 3



See ordering informationfor details

18" [457mm]23" [584mm]


90°C55°C (450W + Up)65°C (175-400W)

ENSA18 175-400W

ENSA23 400-1000W

SupplyWire (Min.)

AmbientEnvironment


SE18" & 23"E&G STEELER


E N C L O S E D & G A S K E T E DH I G H - B A Y I N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400, 450,

750, 1000WMetal Halide (MH) 175, 250, 400, 1000WHigh Pressure Sodium (HP) 250, 400, 600, 750W



MH175=175W250=250W400=400W1000=1000WHP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 12

COOPER LIGHTING - LUMARKD I M E N S I O N S




• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40°F) for HP and -30°C (-20°F) for MH, MP and ML


• Clear tempered glass lensin an extruded aluminumdoor frame with stainlesssteel latches allows accessfor relamping withouttools



The Benchmark EB utilizes adurable heavy-duty die-cast aluminum ballast housing and theSA18 and SA23 reflector systemfor maximum performance. It features a die-cast aluminum neckfor superior strength and an extruded aluminum door framewith stainless steel latches for access to the lamp without tools.The EB is fully enclosed and gasketed at three (3) separatepoints to prevent entry of externalcontaminants. U.L. listed and CSAcertified for damp locations standard. Wet location optional.

The Benchmark EB is perfect fortextile mills, gymnasiums,hangars, assembly and auto service areas.



S A M P L E N U M B E R : H P E B - E N S A 1 8 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesEB=E&G

Benchmark

Reflector TypeENSA=Enclosed

& Gasketed Spun Aluminum

ReflectorDiameter18=18"23=23"

Distribution 3


18" [457mm] 23" [584mm]




105°C55°C (450W + Up)65°C (175-400W)

ENSA18 175-400W

ENSA23 400-1000W

SupplyWire (Min.)

AmbientEnvironment

EB18" & 23"

E&G BENCHMARK



D I E - C A S T A L U M I N U M E N C L O S E D & G A S K E T E DH I G H - B A Y H E A V Y - D U T Y

L U M I N A I R E





MH175=175W250=250W400=400W1000=1000WHP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING13



• Durable heavy-duty die-cast aluminum housing for lasting performance in the harshest environments.Integrally hinged for ease of maintenance withoptional toolless entry.Finished in a standardwhite polyester powderpaint

• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40°F) for HP and -30°C (-20°F) for MH, MP andML

• Cast aluminum neck with heat- and impact-resistantglass lenses creates uplight that helps illuminate high-ceilingspaces

• Clear tempered glass lensin an extruded aluminumdoor frame with stainlesssteel latches allows access for relampingwithout tools




The Benchmark UB utilizes adurable heavy-duty die-cast aluminum ballast housing and the SA18 reflector system formaximum performance. It features a cast aluminum neckfor superior strength and a hingedand latched extruded aluminumdoor frame for access to the lampwithout tools U.L. listed for andCSA certified damp location standard.

The Benchmark UB is perfect forretail stores, gymnasiums,hangars, assembly and auto service areas.


18" [457mm]

28" 15/16" [734mm]


S A M P L E N U M B E R : H P U B - E N S A 1 8 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesUB=Benchmark

Uplight

Reflector TypeENSA=Enclosed

& Gasketed Spun Aluminum

ReflectorDiameter18=18"

Distribution 3



105°C65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

ENSA18 175-400W

D I M E N S I O N S


UBBENCHMARK UPLIGHT


H E A V Y - D U T Y I N D U S T R I A LL U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400, 450WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 250, 400W


Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W

MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 14







• Computer designed,faceted SA18 reflector andanodized baffles providemaximum photometricperformance and beam efficiency




The Econoliter utilizes the SA18reflector system. Anodized reflector baffles combine with theSA18 reflector to kick light into thedesired distribution for narrowaisle environments. U.L. listedand labeled for damp location.CSA Certified.

Econoliter provides optimum visual conditions in warehousesby redirecting light to achievehigh vertical lighting levels onstacks and maximum horizontal footcandles in the aisles.

18" [457mm]

250W HPS & MP, MH400W HPS

24" [610mm]400W MP & MH26 1/8" [664mm]



S A M P L E N U M B E R : H P S S - E L 1 8 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSS=Steeler

Reflector TypeEL=Econoliter


Distribution 3



90°C65°C

SupplyWire (Min.)

AmbientEnvironment

EL18 175-400W

SSECONOLITER



A I S L E L I G H T I N D U S T R I A LL U M I N A I R E



LampWattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W

MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING15

D I M E N S I O N S







• Computer-designed, reflector mounts easilyand allows multiple distribution patterns forprecise control



The SS VertX combines durablecold-rolled steel housing with ahydroform aluminum field-adjustable reflector to provide superior aisleway illumination.U.L. listed and labeled for damplocation. CSA certified.

The SS VertX aisle lighter is idealfor warehouse applications. Its unique distribution pattern delivers high horizontal illumination while reducing “scallops” or hot spots for a more uniform vertical surface.



S A M P L E N U M B E R : M H S S - A V 1 9 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSS=Steeler

Reflector TypeAV=VertX


Distribution 3


19" [483mm]

26 7/8" [683mm]


90°C55°C (450W)65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

AV19 175-450W


SSVERTX


V E R T I C A L A I S L E L I G H T E RH I G H - B A Y L U M I N A I R E


MH175=175W250=250W400=400WHP150=150W250=250W400=400W

Voltage 4





Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400, 450WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 150, 250, 400W


IND

US

TR

IAL

COOPER LIGHTING 16








• Computer aided designed, reflector mounts easilyand allows multiple distribution patterns for precise control



The HB VertX utilizes a durableheavy-duty die-cast aluminumballast housing with a hydroformed aluminum reflectorto provide superior aisleway illumination. U.L. listed and labeled for damp location.

The HB VertX aisle lighter is idealfor warehouse applications. Itsunique distribution pattern delivers high horizontal illumination while reducing “scallops” or hot spots for a more uniform vertical surface.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize asafety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory set forconcentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Standard55°C ambient environments. 5 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representativefor availability and ordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 6 88% EISA complaint MP fixturesnot available in 5-tap voltages. 7 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P H B - A V 1 9 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesHB=High-Bay

Benchmark

Reflector TypeAV=VertX


Distribution 3


19" [483mm]

27" [686mm]


105°C55°C (400W + Up)65°C

SupplyWire (Min.)

AmbientEnvironment

AV19 175-450W

HBVERTX



H E A V Y - D U T Y V E R T I C A LA I S L E L I G H T E R

H I G H - B A Y L U M I N A I R E

Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W 4

MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 5







IND

US

TR

IAL

COOPER LIGHTING17

D I M E N S I O N S






• Computer-designed, reflector mounts easilyand allows multiple distribution patterns forprecise control

• Clear tempered glass lensin an extruded aluminumdoor frame with easylatches to allow access forrelamping without tools




The SE E&G VertX utilizes theAV19 reflector system for maximum performance. It features a die-cast aluminumneck for superior strength and anextruded aluminum hinged doorframe with latches for access tothe lamp without tools. The SEE&G VertX is fully enclosed andgasketed at three separate pointsto prevent entry of external contaminants. U.L. listed and labeled for damp location. CSA Certified.

The SE E&G VertX aisle lighter isideal for higher mounting heightwarehouse applications. Itsunique distribution pattern delivers high horizontal illumination while reducing “scallops” or hot spots for a more uniform vertical surface.



S A M P L E N U M B E R : H P S E - E N A V 1 9 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSE=E&G

VertX

Reflector TypeENAV=Enclosed

& Gasketed VertX


Distribution 3


19" [483mm]

31 3/16" [792mm]


90°C55°C (450W + Up)65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

ENAV19 150-450W


SEE&G VERTX


E N C L O S E D & G A S K E T E DV E R T I C A L A I S L E L I G H T E RH I G H - B A Y L U M I N A I R E




MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 18




• Durable heavy-duty die-cast aluminum housing for lasting performance in the harshest environments. Integrally hinged for ease of maintenance withoptional toolless entry



• Computer aided designed, reflector mounts easilyand allows multiple distribution patterns for precise control

• Clear tempered glass lensin an extruded aluminumdoor frame with latches toallow easy access for relamping without tools



The EB E&G VertX utilizes theAV19 reflector system for maximum performance. It features a die-cast aluminumneck for superior strength and anextruded aluminum hinged doorframe with latches for access tothe lamp without tools. The EBE&G VertX is fully enclosed andgasketed at three separate pointsto prevent entry of external contaminants. U.L. listed and labeled for damp location. CSA Certified.

The EB E&G VertX aisle lighter isideal for higher mounting heightwarehouse applications. Itsunique distribution pattern delivers high horizontal illumination while reducing “scallops” or hot spots for a more uniform vertical surface.



S A M P L E N U M B E R : H P E B - E N A V 1 9 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesEB=E&B

VertX

Reflector TypeENAV=Enclosed

& GasketedVertX


Distribution 3


19" [483mm]

30"[762mm]


105°C55°C (450W + Up)65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

ENAV19 175-450W

EBE&G VERTX



H E A V Y - D U T Y E N C L O S E D & G A S K E T E D

V E R T I C A L A I S L E L I G H T E RH I G H - B A Y L U M I N A I R E


MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4







IND

US

TR

IAL

COOPER LIGHTING19

D I M E N S I O N S





• Enclosed and gasketedoptics seal out dirt andother contaminants


• Computer designed,faceted reflector providesmaximum photometricperformance

• Trunk latches secure thereflector to the housing,allowing toolless entry,while internal hangershold reflector / refractor for hands-free relamping



The Enterprise 22" and28" industrial low-bayluminaire combines around, faceted reflectorwith an injection-moldedlens to provide an efficient, symmetricalbeam pattern. U.L. listedand labeled for damp location. CSA Certified.

The Enterprise 22" and28" combines durable construction with precise optics formounting heights below20'. Perfect for warehouses, foundries,gyms, assembly areas, manufacturing plantsand hangars.

23 1/8" [587mm] 28 3/5" [720mm]

R22

26" [660mm]R28

24" [610mm]


S A M P L E N U M B E R : H P E P - R 2 2 - 2 5 0 - M T - Q

NOTES: 1 277V only, not available with HSW, Q, EM, HL or HC options. 2 Not recommended for use with MH lamps due to rapid yellowing typical of polycarbonatematerial. 3 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability andordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 88% EISA complaint MP fixtures not available in 5-tapvoltages. 5 Specifications and dimensions subject to change without notice.

Lamp TypeMP=Pulse

Start Metal Halide

MH=Metal HalideML=Pulse Start

Metal Halide (Linear Reactor) 1


SeriesEP=Enterprise

Reflector SizeR22=22"R28=28"

Reflector Type__=AcrylicPL=Polycarbonate 2

SeriesF=Enterprise

Lamp TypeP=Pulse Start Metal HalideM=Metal HalideS=High Pressure Sodium

Lamp Wattage25=250W32=320W35=350W40=400W 40Q=400W and Quartz Restrike258=250W (Canada, Triple-Tap Ballast) 408=400W (Canada, Triple-Tap Ballast)

Options5T=5-Tap 1

NL=No Lamp Included

STOCK SAMPLE NUMBER: FM40

NOTES: 1 88% EISA complaint MP fixtures not available in 5-tap voltages.. Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add options and accessories.


90°C40°C (R22)55°C (R28)

SupplyWire (Min.)

AmbientEnvironment

RP22 70-450W

RP28 70-450W


EPENTERPRISE 22 & 28


L O W - B A Y I N D U S T R I A L L U M I N A I R E


400, 450WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400W


Lamp WattageMP70=70W100=100W175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W

MH175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 3





IND

US

TR

IAL

COOPER LIGHTING 20






• Enclosed and gasketed optics seal out dirt andother contaminants

• Trunk latches secure thereflector to the housing,allowing toolless entry,while internal hangershold reflector / refractor for hands-free relamping




The Benchmark RButilizes a durableheavy-duty die-castaluminum ballasthousing, a round,faceted reflector andan injection-moldedlens to provide an efficient, symmetricalbeam pattern. U.L.listed and CSA certified for damp location standard. Wet location optional.

The Benchmark RB is perfect for ware-houses, gyms, assem-bly areas,manufacturing plantsand hangars.

23 1/8" [587mm] 28 3/5" [720mm]

28 3/16"[716mm]

26 3/16"[655mm]

NOTES: 1 277V only, not available with HSW, Q, EM, HL or HC options. 2 Not recommended for use with MH lamps due to rapid yellowing typical of polycarbonatematerial. 3 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability andordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 88% EISA complaint MP fixtures not available in 5-tapvoltages. 5 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P R B - R P 2 2 - 4 0 0 - M T - L L

Lamp TypeMP=Pulse

Start Metal Halide




SeriesRB=Round

Low-BayBenchmark

Reflector TypeRP=Round

White Reflector

RA=Round Anodized Reflector

Reflector Diameter22=22"28=28"28PL=28" w/

Polycarbonate Lens 2


105°C55°C (70-450W)

SupplyWire (Min.)

AmbientEnvironment

RP22 70-450W

RP28 70-450W

RBLOW-BAY

BENCHMARK



D I E - C A S T A L U M I N U MR O U N D L O W - B A Y



400, 450WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400W


Lamp WattageMP70=70W100=100W175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W

MH175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 3





IND

US

TR

IAL

COOPER LIGHTING21

23 3/4"[603mm]

26 1/2" [673mm]

D I M E N S I O N S


• Easy-access wiring chamber cover with 3/4"IPS threaded hub forquick fixture mounting

• Ballast and electrical components are mountedto die-cast aluminum topfor cooler operation. Highpower factor ballast withclass H insulation. U.L.Listed for 55° C (131° F)ambient temperature operation. Minimumstarting temperature is -40° C (-40° F) for HP and -30° C (-20° F) for MH and MP

• Spun aluminum reflectorhas internally hingeddoor for toolless entryinto electrical compartment

• Hinged refractor/door assembly has full perimeter silicone gasketing with easy-access thumb screws

• Computer-designed optical system combines a translucent diffuser atthe top with a prismaticlens at the bottom formaximum vertical illumination



Vertimark is an advanced concept in industrial lighting.Combining a durable die-cast aluminum top and spun-aluminum housing with a computer-designed optical system, the Vertimark is an excellent choice for lighting anyarea requiring excellent verticallight distribution.

NOTES: 1 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and orderinginformation. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 2 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P V F - A L - 2 5 0 - M T - Q


Metal HalideMH=Metal HalideHP=High Pressure Sodium

SeriesVF=Vertimark

Lens TypeAL=Prismatic

AcrylicLens

Voltage 1

120V208V240V277V347V480VMT=Multi-Tap wired 277VTT=Triple-Tap wired 347V


LampSeries Wattage

105°C55°C (150-400W)

SupplyWire (Min.)

AmbientEnvironment

Vertimark 150-400W


VFVERTIMARK


L O W - B A Y I N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 150, 250, 400W

Voltage ChartMT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)

Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W

MH175=175W250=250W400=400WHP150=150W250=250W400=400W

IND

US

TR

IAL

COOPER LIGHTING 22



• Standard quick mountingplate for 3/4" IPS conduitfrees both hands to complete wiring

• Die-cast aluminum housing has durable whitepolyester powder coat finish

• Hinged refractor permitsrelamping without removal of refractor

• Acrylic prismatic refractorcontrols light for high vertical and horizontalfootcandles

• Removable ballast compartment cover provides easy internal access

• Optional “P” mounting bracket fits a standard 4" J-Box or outlet box for surface mounting



The Vertimark II delivers horizontal and vertical footcandles to evenly illuminatelow mounting areas such parkinggarages or storage facilities areas. The combination die-cast reflector/ ballast housing makesVertimark II economical. Modularassembly makes installation easyand quality construction ensuresyears of consistent performance.U.L. listed and labeled for damplocation. CSA Certified. Wet location optional.

NOTES: 1 150W is maximum. 2 Not recommended for use with MH lamps due to to rapid yellowing typical of polycarbonate material. 3 Products also available innon-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 Not available with 200 or 250W MP. 5 Specifications and dimensions subject tochange without notice.


S A M P L E N U M B E R : H P B E - 5 A - 1 0 0 H - M T - L L

Lamp TypeMP=Pulse

Start Metal Halide

MH=Metal Halide

HP=High Pressure Sodium 1

SeriesBE=Vertimark II

Lens Type2A=Type II5A=Type V2P=Type II

Polycarbonate 2

5P=Type VPolycarbonate 2

Lamp WattageMP100=100W175=175W200=200W250=250WMH175=175W200=200WHP100=100W150=150W

Ballast_ =Normal

Power Factor

H=HighPower Factor

Voltage 3

120V208V240V277V347V480V 4

MT=Multi-Tap wired 277VTT=Triple-Tap wired 347V

LL=Lamp Included

__=Lamp NotIncluded


Once in place, the EZ123readily accepts the mating half of the hingeand the fixture is easily attached.

2 9/16"[65mm]

5 1/8"[130mm]

P=Mounting Bracket for Surface Mounting or Mounting to 4" J-Box.

17" [432mm]

Surface

12 1/2"[318mm]

Pendant

13 1/4"[337mm]

M O U N T I N G

LampSeries Wattage

90°C40°C (100-250W)

SupplyWire (Min.)

AmbientEnvironment

Vertimark II 100-250W

BEVERTIMARK II



L O W - B A Y I N D U S T R I A LL U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 100, 175, 200, 250WMetal Halide (MH) 175, 250WHigh Pressure Sodium (HP) 100, 150W


IND

US

TR

IAL

COOPER LIGHTING23

Maximum Height is16"=24 1/2" [622mm]21"=25 3/4" [654mm]


16" [406mm]21" [533mm]


• Easy slide-on die-cast aluminum mounting boxwith tapped opening for3/4" conduit



• Safety cable attachedfrom housing to refractorstandard

• Universal ladder bracketsallow for the flexibility tochange out with other reflectors / refractorsavailable in acrylic or aluminum

• Field adjustable shock-and impact-resistantborosilicate glass refractor. Zinc-plated wireform with optional safetyglass bottom for durableperformance



The Steeler SG Prismatic GlassSeries combines the popularSteeler ballast housing withshock- and impact-resistantprismatic borosilicate glass reflectors for maximum durabilityand photometric performance. U.L. listed and labeled for damplocation. CSA Certified.

The Steeler SG is perfect for manufacturing and assemblyareas, retail stores, wholesalewarehouses, grocery chains,malls and auto service areas,where up light is desired.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory setfor concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and orderinginformation. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P S G - G R 1 6 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSG=Steeler

Glass

Refractor TypeGR=Glass

Refractor

RefractorDiameter16=16"21=21"

Distribution 3C=ConcentratedM=MediumW=Wide

D I M E N S I O N S

Refractor LampType Wattage

90°C55°C (450W + Up)65°C (150-400W)

SupplyWire (Min.)

AmbientEnvironment

GR16 150-400W

GR21 400-1000W*

NOTES: * 1000W requires BT37 lamp.


SG16" & 21" PRISMATICGLASS HIGH-BAY


P R I S M A T I C G L A S S H I G H - B A Y I N D U S T R I A L L U M I N A I R E


1000WMetal Halide (MH) 175, 250, 400, 1000WHigh Pressure Sodium (HP) 250, 400, 600, 750W


Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W 750=750W 1000=1000W

MH175=175W250=250W400=400W1000=1000W HP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 24






• Universal ladder bracketsallow for the flexibility tochange out with other reflectors /refractors available in acrylic or spunaluminum




The Benchmark GB PrismaticGlass Series utilizes a durableheavy-duty die-cast aluminumballast housing and shock- andimpact-resistant borosilicate glassreflector system for specification-level performance. U.L. listed and CSA certified. Damp locationstandard.

The Benchmark GB PrismaticGlass Series is perfect for high-bay applications such asmanufacturing, gymnasiums,hangars, assembly, auto service areas and retail storeswhere up light is desired.


S A M P L E N U M B E R : H P G B - G R 1 6 - M - 4 0 0 - M T - Q

16" [406mm]21" [533mm]

Maximum Height is16"=25 11/16" [652mm]21"=28 7/16" [722mm]



105°C55°C (450W + Up)65°C (150-400W)

SupplyWire (Min.)

AmbientEnvironment

GR16 150-400W

GR21 400-1000W*


GB16" & 21"

PRISMATICGLASS

BENCHMARK



D I E - C A S T A L U M I N U MP R I S M A T I C G L A S S

H I G H - B A Y H E A V Y - D U T Y I N D U S T R I A L L U M I N A I R E




NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory setfor concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Requires reduced envelope BT-37 lamp for MH. 5 Products also available in non-US voltages and 50HZ for international markets. Consult your CooperLighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 6 88% EISA complaint MP fixtures not available in 5-tap voltages. 7 Specifications and dimensions subject to change without notice.

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesGB=Glass

Benchmark

Refractor TypeGR=Glass

Refractor



Lamp WattageMP175=175W200=200W 250=250W320=320W 350=350W 400=400W450=450W 750=750W 1000=1000W 4

MH175=175W250=250W400=400W1000=1000W 4

HP250=250W400=400W600=600W750=750W

Voltage 5





IND

US

TR

IAL

COOPER LIGHTING25










The Enclosed and GasketedGlass Steeler utilizes a 16" and21" borosilicate glass refractorsystem for maximum performance. It features a cast aluminum neck for superior strength and a hinged door frame with latches for access to the lampwithout tools. The Enclosedand Gasketed Glass Steeler isfully enclosed and gasketed at three (3) separate points toprevent entry of external contaminant’s. U.L. listed and CSA Certified for damp locations.

The Enclosed and GasketedGlass Steeler is perfect for textile mills, hangars, assemblyand auto service areas.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory setfor concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Requires reduced envelope BT-37 lamp for MH. 5 Products also available in non-US voltages and 50HZ for international markets. Consult your CooperLighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 6 88% EISAcomplaint MP fixtures not available in 5-tap voltages. 7 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P S E - E N G R 1 6 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSE=E&G

Steeler

Refractor TypeENGR=Enclosed

& Gasketed Glass Refractor

Refractor Diameter16=16"21=21"

Distribution 3


D I M E N S I O N S

16" [406mm]21" [533mm]

Maximum Height is16"=29 1/4" [742mm]

21"=29" [736mm]See ordering information

for details


90°C55°C (450W + Up)65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

ENGR16 175-400W

ENGR21 400-1000W*



SE16" & 21" E&G GLASSSTEELER


E N C L O S E D & G A S K E T E DG L A S S H I G H - B A YI N D U S T R I A L L U M I N A I R E





MH175=175W250=250W400=400W1000=1000W 4

HP250=250W400=400W600=600W750=750W

Voltage 5





IND

US

TR

IAL

COOPER LIGHTING 26










The Enclosed and Gasketed GlassBenchmark utilizes a 16" and 21"borosilicate glass refractor systemfor maximum performance. It features a cast aluminum neck forsuperior strength and a hingeddoor frame with latches for accessto the lamp without tools. The Enclosed and Gasketed Glassis fully enclosed and gasketed atthree (3) separate points to prevent entry of external contaminant’s. U.L. listed and CSACertified for damp locations withoptional wet location.

The Enclosed and Gasketed GlassBenchmark is perfect for textilemills, hangars, assembly and autoservice areas.

16" [406mm]21" [533mm]

Maximum Height is16"=30 3/8" [772mm]

21"=29 7/8" [759mm]See ordering information

for details

NOTES: 1 277V only, not available with HSW, Q, EM, HL or HC options. 2 Factory set for concentrated, medium or wide distributions only if P (factory pre-set) is inthe nomenclature of the fixture. Otherwise shipped in medium setting. 3 Requires reduced envelope BT-37 lamp for MH. 4 Products also available in non-USvoltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 88% EISA complaint MPfixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P E B - E N G R 1 6 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse

Start Metal Halide




SeriesEB=E&G

Benchmark

Refractor TypeENGR=Enclosed

& GasketGlass Refractor




105°C55°C (450W + Up)65°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

ENGR16 175-400W

ENGR21 400-1000W*


EB16" & 21"

E&G GLASSBENCHMARK



E N C L O S E D & G A S K E T E DG L A S S H I G H - B A Y






MH175=175W250=250W400=400W1000=1000W 3

HP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING27





• Universal ladder bracketsallow for the flexibility tochange out with other reflectors / refractorsavailable in aluminum or glass


• Easily mounted prismaticacrylic refractor has multiple field-adjustabledistribution patterns forprecision control



The Prismatic high-bay combines the popular Steelerballast housing with an acrylicreflector for maximum durability and photometric performance. U.L. listed and labeled for damp location. CSA Certified.

The Prismatic high-bay is perfect for retail stores, wholesale warehouses, grocery chains, malls and auto showrooms.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory setfor concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Productsalso available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information.88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.

D I M E N S I O N S

16" [406mm]22" [559mm]25" [635mm]

Maximum Height is16"=26" [660mm]

22"=28 1/2" [724mm]25"=29 1/16" [738mm]



S A M P L E N U M B E R : H P S S - P D 1 6 - M - 2 5 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSS=Steeler

Refractor TypePD=Prismatic

Acrylic

RefractorDiameter16=16"22=22"25=25"

Distribution 3



90°C40°C (Enclosed)*55°C (Open)

SupplyWire (Min.)

AmbientEnvironment

PD16 175-400W

PD22 175-450W

PD25 400-1000W

NOTES: * PD16 enclosed is 250W maximum. PD25 enclosed is 400W only.


SS16", 22" & 25"PRISMATIC HIGH-BAY


P R I S M A T I C H I G H - B A YI N D U S T R I A L L U M I N A I R E





MH175=175W250=250W400=400W1000=1000W HP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 28





• Universal ladder bracketsallow for the flexibility tochange out with other reflectors / refractors available in aluminum orglass


• Easily mounted prismaticacrylic refractor has multiple field-adjustabledistribution patterns forprecision control



The BenchMark HB prismatichigh-bay utilizes a durable heavy-duty die-cast aluminumballast housing and prismaticacrylic reflector for maximumdurability and photometric performance. U.L. listed and CSAcertified. Damp location standard.

The BenchMark HB prismatichigh-bay is perfect for retailstores, wholesale warehouses,grocery chains, malls and auto showrooms.

16" [406mm]22" [559mm]25" [635mm]

Maximum Height is16"=27 15/16" [710mm]22"=30 7/16" [773mm]25"=31 5/8" [803mm]


NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory setfor concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and orderinginformation. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages.6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P H B - P D 1 6 - M - 2 5 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesHB=High-Bay

BenchMark


Acrylic

RefractorDiameter16=16"22=22"25=25"

Distribution 3



105°C55°C (Open) or40°C (Enclosed)*

SupplyWire (Min.)

AmbientEnvironment

PD16 175-400W

PD22 175-450W

PD25 400-1000W

NOTES: * PD16 enclosed is 250W only. PD25 enclosed is 400W only.

HB16", 22" & 25"

PRISMATICBENCHMARK



D I E - C A S T A L U M I N U MP R I S M A T I C H I G H - B A Y






MH175=175W250=250W400=400W1000=1000W HP250=250W400=400W600=600W750=750W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING29






• Prismatic acrylic refractorprovides maximum photometric performanceand beam efficiency. The system is completelyenclosed and gasketed atthree (3) points: door torefractor, refractor toneck, and neck to housing

• Clear tempered glass orprismatic acrylic droplens



The Enclosed and Gasketed Prismatic Acrylic Steeler utilizes a refractor system formaximum performance. It features a cast aluminum neckfor superior strength and a hingeddoor frame with latches for accessto the lamp without tools. Theunit is fully enclosed and gasketedat three separate points to prevent entry of external contaminants. U.L. listed and CSA Certified for damp locations.

The Enclosed and Gasketed Prismatic Acrylic Steeler is perfect for retail, hangars, assembly and auto service areas.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory set for concentrated, medium or wide distributions only if P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped inmedium setting. 4 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures notavailable in 5-tap voltages. 6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P S E - E N P D 2 2 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSE=E&G

Steeler

Refractor TypeENPD=Enclosed

& Gasketed PrismaticAcrylic Refractor

Refractor Diameter22=22"

Distribution 3


D I M E N S I O N S

22" [559mm]

Maximum Height is28 3/4" [730mm]

Drop Bottom Adds3 1/2" to Overall Height


90°C40°C

SupplyWire (Min.)

AmbientEnvironment

ENPD22 175-400W


SE 22" E&G PRISMATICACRYLIC STEELER


E N C L O S E D & G A S K E T E DP R I S M A T I C A C R Y L I C H I G H - B A Y I N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 250, 400W



MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 30







• Clear tempered glass lensin an extruded aluminumhinged door frame withlatches allows access forrelamping without tools



The Enclosed and Gasketed Prismatic Acrylic Benchmark utilizes a refractor system formaximum performance. It features a cast aluminum neckfor superior strength and a hingeddoor frame with latches for accessto the lamp without tools. Theunit is fully enclosed and gasketedat three separate points to prevententry of external contaminants.U.L. listed and CSA Certified fordamp locations.

The Enclosed and Gasketed Prismatic Acrylic Benchmark is perfect for retail, hangars, assembly and auto service areas.



S A M P L E N U M B E R : H P E B - E N P D 2 2 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesEB=E&GBenchmark

Refractor TypeENPD=Enclosed

& Gasketed Prismatic Acrylic Refractor



22" [559mm]


Drop Bottom Adds3 1/2" to Overall Height


105°C40°C

SupplyWire (Min.)

AmbientEnvironment

ENPD22 175-400W

EB22"

E&G PRISMATICACRYLIC

BENCHMARK



E N C L O S E D & G A S K E T E DP R I S M A T I C H I G H - B A Y





MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING31

D I M E N S I O N S




• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40°F) for HP and -30°C(-20°F) for MH, MP andML


• Universal ladder bracketsallow for the flexibility tochange out with other reflectors / refractorsavailable in spun aluminum

• Easily mounted microcellular prismaticacrylic refractor has multiple field adjustabledistribution patterns forprecision control without the glare of traditionalclear acrylics



The Enhanced Refractor high-bay combines the popularSteeler ballast housing with a microcellular translucent whiteacrylic refractor. This technology provides architectural appeal andimproved lighting performance athigher ambient ratings. U.L.Listed and CSA certified for damplocations.

The Enhanced Refractor high-bayis perfect for architectural applications like retail stores,wholesale warehouses, grocerychains, malls, and auto showrooms.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Openrated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Factory set for concentrated, medium or wide distributions onlyif P (factory pre-set) is in the nomenclature of the fixture. Otherwise shipped in medium setting. 4 Products also available in non-US voltages and 50HZ forinternational markets. Consult your Cooper Lighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not availablein 347V and Triple-tap voltages. 5 88% EISA complaint MP fixtures not available in 5-tap voltages. 6 Specifications and dimensions subject to change withoutnotice.


S A M P L E N U M B E R : H P S S - E R 2 2 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesSS=Steeler

Refractor TypeER=Enhanced

Prismatic Refractor


Distribution 3


22" [559mm]


Drop Bottom Adds 3 1/2" to Overall Height

LampRefractor Wattage

90°C40°C *55°C **

65°C (Open)

SupplyWire (Min.)

AmbientEnvironment

ER22 175-400W

NOTES: * Drop Acrylic Bottom.** Enclosed Bottom.


SS22" ENHANCEDREFRACTORHIGH-BAY


E N H A N C E D R E F R A C T O RH I G H - B A Y I N D U S T R I A L L U M I N A I R E




MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING 32






• Universal ladder bracketsallow for the flexibility tochange out with other reflectors / refractors available in spun aluminum

• Easily mounted microcellular prismaticacrylic refractor has multiple field adjustabledistribution patterns forprecision control without the glare of traditionalclear acrylics



The Enhanced Refractor Benchmark high-bay utilizes adurable heavy-duty die-cast aluminum ballast housing and amicrocellular translucent whiteacrylic refractor providing maximum durability. This technology provides architecturalappeal and improved lighting performance at higher ambientratings. U.L. Listed and CSA certified for damp locations.

The Benchmark Enhanced Refractor high-bay is perfect forarchitectural applications like retail stores, wholesale warehouses, grocery chains,malls, and auto show rooms.



S A M P L E N U M B E R : H P H B - E R 2 2 - M - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesHB=High-Bay

Benchmark

Refractor TypeER=Enhanced

Prismatic Refractor


Distribution 3


22" [559mm]

Maximum Height is29 11/16" [754mm]Drop Bottom Adds

3 1/2" to Overall Height


105°C55°C (Enclosed)65°C (Open)

SupplyWire (Min.)

AmbientEnvironment

ER22 175-400W

HB22" ENHANCED

REFRACTORBENCHMARK



D I E - C A S T A L U M I N U M E N H A N C E D R E F R A C T O RH I G H - B A Y H E A V Y - D U T Y

I N D U S T R I A L L U M I N A I R E




MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 4





IND

US

TR

IAL

COOPER LIGHTING33

D I M E N S I O N S






• Acrylic refractor systemmounts directly to housing and provides full,even illumination



The Steeler LX utilizes a heavy-duty formed steel ballast housing and prismaticacrylic refractor and drop refractorsystem for excellent photometricperformance. U.L. listed and labeled for damp location. CSACertified.

The Steeler LX is perfect for applications requiring vertical and horizontal illumination onmultiple surfaces, including fabrication, manufacturing, assembly areas and retail / commercial / industrial warehousing where height restrictions must be considered.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Openrated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 88% EISA complaint MP fixtures not availablein 347V and Triple-tap voltages. 4 88% EISA complaint MP fixtures not available in 5-tap voltages. 5 Specifications and dimensions subject to change withoutnotice.


S A M P L E N U M B E R : H P L X - D B 2 5 - 4 0 0 - M T - Q

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesLX=Prismatic

Direct MountBenchmark


AcrylicRefractor

DB=Prismatic Acrylic Refractor with Drop Acrylic Refractor

Refractor Diameter22=22"25=25"

22" [559mm]25" [635mm]

Maximum Height isPD22=24" [607mm]

PD25=24 1/4" [616mm]Drop Bottom Adds

3 1/2" to Overall Height.


90°C40°C

SupplyWire (Min.)

AmbientEnvironment

LX 175-400W


LXPRISMATIC DIRECT- MOUNTSTEELER


D I R E C T M O U N TP R I S M A T I C H I G H - B A YI N D U S T R I A L L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400W



MH175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 3





IND

US

TR

IAL

COOPER LIGHTING 34







• Acrylic refractor systemmounts directly to housing and provides full,even illumination



The BenchMark XB utilizes adurable heavy-duty die-castaluminum ballast housing and prismatic acrylic refractor and drop refractor system forspecification-level performance.U.L. listed and CSA certified. Standard damp location.

The BenchMark XB is perfectfor applications requiringvertical and horizontalillumination on multiplesurfaces, including fabrication,manufacturing, assemblyareas and retail/commercial/industrial warehousing whereheight restrictions must beconsidered and durability isdesired.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 2 277V only, not available with HSW, Q, EM, HL or HC options. 3 Productsalso available in non-US voltages and 50HZ for international markets. Consult your Cooper Lighting Representative for availability and ordering information.88% EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 88% EISA complaint MP fixtures not available in 5-tap voltages. 5 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P X B - D B 2 5 - 4 0 0 - 1 2 0 V

Lamp TypeMP=Pulse


MH=Metal Halide 1



SeriesXB=Prismatic

Direct-MountBenchmark

Refractor TypePD=Prismatic Acrylic

RefractorDB=Prismatic Acrylic

Refractor with Drop Acrylic Refractor


22" [559mm]25" [635mm]

Maximum Height isPD22=24 3/4" [629mm]

PD25=25" [635mm]Drop Bottom Adds

3 1/2" to Overall Height.


105°C40°C (175-400W)

SupplyWire (Min.)

AmbientEnvironment

XB 175-400W

XBPRISMATIC

DIRECT-MOUNTBENCHMARK



D I E - C A S T A L U M I N U MP R I S M A T I C L O W - B A Y





MH175=175W250=250W400=400WHP250=250W400=400W

Voltage 3





IND

US

TR

IAL

COOPER LIGHTING35

D I M E N S I O N S

• U.L. listed for damp locations. CSA certified

• Mounting hub is tappedwith an opening for 3/4"conduit. Ballast cover iseasily removed for easywiring and installation

• The heavy-duty, spunaluminum housing is finished in a white polyester powder coatstandard. Other finish colors available

• Compact Fluorescentelectronic ballast in 1 or lamp configuration provides up to four (4)switch level control or optional dimming ballast. Compact Fluorescent ballast areelectronic, universal voltage 120-277V, less than 10% harmonic distortion, with minimumstarting temperature of0°C for 32, 42W and -30°C (-22°F) for 60 and120W

• Compact Fluorescentsockets are rotary lockhigh temperature PBTmaterial and incorporate:32W GX24q3 or 42WGX24q4. 60 and 120W is a 2G8

• Available with high-efficiency 22" prismaticacrylic refractor or 22"high-reflectance whitespun aluminum reflector

• Optional drop bottom andconical bottom refractoror safety glass bottomdoor



The AXIO Series Luminaireoffers unmatched photometricperformance with an updatedhousing style. A wide range oflamp, ballast and opticalchoices gives the DP seriesunmatched flexibility andperformance capabilities.U.L. listed and CSA certifiedfor damp location standard.

The AXIO Series is perfect forschool gymnasiums, multi-purpose rooms, retail stores, auto showrooms, and manufacturing assembly areas.

NOTES: 1 Specify voltage with emergency ballast, plug or MWS options. 2 Add as suffix in the order shown. 3 Specified for lamp to ship with order.Lamp is shippedseparate from luminaire. Lamp is Cooper designated product based on luminaire requirements. 4 Non-switched products provided with standard 3' cord andNEMA plug (120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 347V-L37-20P and 480V-L8-20P). Dual and Triple switching available with cord and plug option in 120 or277V only. "TS" switching (120V-L21-20P and 277V-L22-20P), "DS" switching (120V-L15-20P and 277-L16-20P). Consult your Cooper Lighting representative forwiring and circuit details. 5 Order separately. 6 Wire guards and lens enclosures

22" [559mm]


Drop Bottom Adds 3 1/2" to Overall Height


S A M P L E N U M B E R : C F D P - P C 2 2 - 3 / 1 2 0 - E - L L

Lamp TypeCF=Compact

Fluorescent

SeriesDP=AXIO Series

Refractor TypePC22=22" Prismatic

AcrylicSC22=22" Spun

Aluminum

Lamp Wattage6/32=(6) 32W Triple Tube8/32=(8) 32W Triple Tube6/42=(6) 42W Triple Tube8/42=(8) 42W Triple Tube

Voltage 1

120V208V240V277VE=Electronic

(120-277V)

Options &Accessories(See Below)

Options 2

FH-1=Die-cast Aluminum Fixture Hook (with 3/4"threads for easy installation)

FL-1=Malleable Iron Plated Fixture Loop (with 3/4"threads for easy installation)

SCF=3' Aircraft Safety Cable secures Housing toCeiling (Alternative lengths available. Example: SCF6 = 6' Cable)

LL=Lamp Included (Lamp is Cooper designatedproduct based on luminaire requirements. Lamp is shipped separate from luminaire unless otherwise noted) 3

C3=3' Cord with no plug (Must use with FH-1 or FL-1,or SHK) 4

PC3=3' Cord with NEMA Plug (120V-L5-15P, 208V-L6-15P, 347V-L37-20P, AND 480V-L8-20P) Othercord lengths are available by specifying length(PC6 for 6' Cord) Requires FH-1 or FL-1, or SHK.Example: PC3-120V Use with TPPH-NEMA.Specify 4

PC3/4C=3' Cord with NEMA Plug (Dual Switching) 4

PC3/5C=3' Cord with NEMA Plu (Triple Switching) 4

PHC-NEMA=Power Cord and NEMA Plug (18" PowerCord and 20 AMP NEMA plug configuration). Must be used with FL-1and TPPH-NEMA (Thru-Way PendantPower Hook)

DS=Dual Switching 4

TS=Triple Switching 4

QS=Quad Switching 4

Accessories 5PC3=3' Cord with NEMA Plug - (120V-L5, 208V-L6-15P, 347V-L37-20P and 480V-L8-

20P) Other cord lengths are available by specifying length (PC6 for 6' cord). Requires FH-1 or FL-1, or SHK. Use with TPPH-NEMA. Specify Voltage

PHC-NEMA=Power Cord and NEMA plug - 18" Power Cord and 20 Amp NEMA plugconfiguration. Must be used with FL-1 and TPPH-NEMA (Thru-Way Pendant Power Hook)

SGB22=Safety Glass Bottom for 22" Refractor (Not Compatible with WG22 - 400Wmax.) 6

FWG22/WDB=Wire Guard with DB22 Drop Lens for PD 22" Refractor - DB22 not included 6

WG22=Wire Guard for PD 22" Refractor (Not compatible with SGB) 6

WGD22=Wire Guard for PD or PC 22" Refractor (Not Compatible with SGB22) 6

WG22/SGB=Wireguard with Glass Lens for 22" Reflector (400W Max.) 6

DB22=Drop Acrylic Refractor for 22" (400W max.)CB22=Conical Bottom for 22'' Refractor (Maximum 400W)FH-1=Fixture HookFL-1=Fixture Loop


90°C25°C

SupplyWire (Min.)

AmbientEnvironment

DP 192-336W


DPAXIO SERIES


C O M P A C T F L U O R E S C E N TH I G H - B A Y L U M I N A I R E

IND

US

TR

IAL

COOPER LIGHTING 36


• Housings and threaded guard are die-cast aluminum. Small housingutilizes 1/2" NPS entrywhile large housing use3/4" NPS entry. Standardconstruction includes thru-way wiring for ceilingand wall mount units.Guard is one piece andfeatures stainless steellocking screw for vandalresistance

• Optional pendant mount,wall or ceiling mounting.Wall mount fits 4" roundor octagonal J-Box. Pendant mount utilizes1/2" NPS for small and3/4" NPS for large

• Sockets are medium-base,porcelain exterior with150°C wire

• Globe is heat- and impact-resistant glass and accepts up to 200W incandescent in smallhousing and 300Wincandescent in the large housing

• Silicone gasket provideslong life vapor seal

• Standard finish is polyester powder coatgrey

• IP65 Rated



Lumark’s Vaportight fixtures aredesigned for heavy-duty, non-corrosive environments. Applications include processingplants, cold storage, foundries,factories, loading docks and retail applications. U.L and CUL listed for non-classified wet locations. For use in 40°C ambientenvironments.

A A AC

B B B1 5/8"

[41mm]

Wall MountPendant MountCeiling Mount

NOTES: 1 Care must be taken in selecting lamps due to size variations by manufacturers. 2 A21 lamp maximum. Lamp not included. 3 PS30 lamp maximum. Lampnot included. 4 Standard finish is polyester powder coat grey with inside painted white. 5 Guard required to install. 6 Order separately.


S A M P L E N U M B E R : I C V C 1 G

Lamp TypeIC=Incandescent

Mounting VC=CeilingVW=WallVP=Pendant

LampWattage 1

1=200W 2

2=300W 3

GuardG=Guard

Accessories 4, 5, 6

DC1=Concentric Dome 200DC2=Concentric Dome 300DA1=Angle Dome 200DA2=Angle Dome 300

Ceiling Mount A B CSmall 4 1/4" [108mm] 9 3/4" [248mm]Large 5 11/16" [145mm] 11 1/2" [293mm]Pendant MountSmall 4 1/4" [108mm] 10 1/4" [261mm]Large 5 11/16" [145mm] 12 1/8" [308mm]Wall MountSmall 4 1/4" [108mm] 12 5/8" [321mm] 9 1/2" [242mm]Large 5 11/16" [145mm] 14 1/4" [362mm] 10 9/16" [269mm]

B

A

C

B

A

C

35

Concentric Dome A B CDC1 4 3/8" [111mm] 11 3/4" [298mm] 6 7/8" [175mm]DC2 4 3/8" [111mm] 14 11/16" [373mm] 8 11/16" [221mm]Angle DomeDA1 5 13/16" [148mm] 11 3/16" [285mm] 12 3/4" [324mm]DA2 5 13/16" [148mm] 13 3/4" [349mm] 10" [254mm]

A C C E S S O R I E S

Concentr ic Dome (DC1, DC2) Angle Dome (DA1, DA2)

Series

90°C75°C*

SupplyWire (Min.)

AmbientEnvironment

Small

ICVC1

ICVP1

ICVW1*

Large

ICVC2

ICVP2

ICVW2

40°C 90°C

40°C

ICVAPORTIGHT

200-300WIncandescent

I N D U S T R I A L S A F E T Y A N D S E C U R I T Y

L U M I N A I R E

IND

US

TR

IAL

COOPER LIGHTING37

D I M E N S I O N S

• Housing and threadedguard are die-cast aluminum with 3/4" NPSentry. Standard construction includesthru-way wiring for ceiling or wall mountunits. Guard is one piececonstruction and featuresstainless steel lockingscrew for vandal resistance

• Pendant, surface or wallmounting available. Ceiling mount fits 4"round or octagonal J-Box. Pendant mount utilizes a 3/4" NPS

• Sockets are 4kv pulse-rated medium-baseporcelain lamp socket forHID applications or Gx24base for 42W CFL. Lamp included stockpackages


• Silicone gasket provideslong life vapor seal inhousing

• Approximate net weight: 6-14 lbs. (2.73-6.36 kgs.)


Lumark’s Vaportight fixturesare designed for heavy-duty,non-corrosive environments.Applications include accent,entrance/eaves, pathway, recreation, retail, security andtransportation applications.U.L and CUL listed for non-classified wet locations.

NOTES: 1 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and orderinginformation. 2 Add as suffix in the order shown. 3 Lamp is Cooper designated product based on luminaire requirements. Lamp is shipped separate from luminaire unless otherwise noted. 4 Order separately. 5 DC1 and DA1 not available with wall mount. 6 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P V S - W - G G - 1 0 0 - 1 2 0


Metal HalideHP=High Pressure

SodiumIN=IncandescentPL=Compact

Fluorescent

SeriesVS=Vaportight

Small

MountingW=Wall MountC=Ceiling/Pendant

Mount

OpticsGG=Glass Jar

with Globe

Lamp WattageHID50=50W70=70W100=100WIN200=200WPL26=26W32=32W42=42W

Voltage 1

120=120V277=277V347=347VDT=Dual-TapMT=Multi-Tap wired 277VUNV=120-277V Electronic Ballast

Options +Accessories(See Below)

Options 2

__=Grey (Standard)BK=BlackSY=SilverWH=WhiteLL=Lamp Included 3UP10=10% UplightF1=Single Fuse (120, 277 or 347V only)

8 3/16" [208mm] 9 3/16" [233mm]

11 3/4"[299mm]

11 51/64"[300mm]

4 1/8"[105mm]

Ceiling / Pendant Mount Wall Mount

Lamp Type

90°C*40°C

90°C*40°C

40°C (HPS)25°C (MH)

SupplyWire (Min.)

AmbientEnvironment

INC

CFL (26-42W)

HID (50-100W)

NOTES: * Internal Wiring. Wiring in External J-Box is 90°C.

150°C*

Accessories 4

DC1=Concentric Dome 200 5DA1=Angle Dome 200 5


VSVAPORTIGHTSMALL

50-100WP u l s e S t a r t M e t a l H a l i d eH i g h P r e s s u r e S o d i u m



INDUSTRIAL S A F E T Y A N D S E C U R I T YL U M I N A I R E

IND

US

TR

IAL

COOPER LIGHTING 38


• U.L. and cUL listed fornon-classified wet locations. EISA Complaint

• Housing and threadedguard are die-cast aluminum with 3/4" NPSentry. Standard construction includes thru-way wiring for ceiling or wall mountunits. Guard is one piececonstruction and featuresstainless steel lockingscrew for vandal resistance

• Pendant, surface or wallmounting available. Ceiling mount fits 4"round or octagonal J-Box. Pendant mount utilizes a 3/4" NPS

• Sockets are 4kv pulse-rated medium-base porcelain lamp socket forHID applications or Gx24base for 42W CFL. Lamp included stock packages


• Silicone gasket provideslong life vapor seal inhousing

• Approximate net weight: 6-14 lbs. (2.73-6.36 kgs.)


Lumark’s Vaportight fixtures aredesigned for heavy-duty, non-corrosive environments. Applications include accent, entrance/eaves, pathway, recreation, retail, security andtransportation applications. U.L and CUL listed for non-classified wet locations.

NOTES: 1 Damp location listed. 2 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and ordering information. 3 Add as suffix in the order shown. 4 Lamp shipped separately. 5 Not for use with “GG” optics. 6 Order separately. 7 Requires “GG” optics. 8 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P V L - C - G G - 1 7 5 - 1 2 0



SodiumIN=IncandescentPL=Compact

Fluorescent

SeriesVL=Vaportight Large

Mounting C=Ceiling /

Pendant Mount

OpticsGG=Glass JarPV12=12" Direct Mount

Prismatic Lens 1

PV16=16" Direct Mount Prismatic Lens 1

SV16=16" Direct Mount Spun Aluminum Reflector 1

Lamp WattageHID70=70W100=100W150=150W175=175WIN300=300WCF42=42W57=57W

Voltage 2

120=120V277=277V347=347VDT=Dual-TapMT=Multi-Tap wired 277VUNV=120-277V Electronic Ballast

Options +Accessories(See Below)

Options 3

__=Grey (Standard)SY=SilverWH=WhiteBZ=BronzeF1=Single Fuse (120, 277 or 347V only)LL=Lamp Included 4

UP10=10% UplightQ=Quartz Restrike (Hot Strike Only) 5

FH-1=Die-cast Aluminum Fixture Hook (w/ 3/4" threads for easy installation)

FL-1=Malleable Iron Plated Fixture Loop (w/ 3/4" threads for easy installation)

SHK=Die-cast Aluminum Fixture Hook (w/safety screws and 3/4" threads for easy installation)

PC3=3' Cord with NEMA Plug ((120V-L5-15P, 208V-L6-15P,347V-L37-20P, and 480V-L8-20P) Other cord lengths areavailable by specifying length (PC6 for 6' Cord) RequiresFH-1 or FL-1, or SHK. Example: PC3-120V Use withTPPH-NEMA. Specify Voltage.

Accessories 6

SGB16=Safety Glass Bottom for 16" Refractor (Not compatible with “WG”)(250W maximum)

WG16/SGB=Gym Wire Guard with Safety Glass Bottom for 16" RefractorWGD16=Wire Guard for DB16DB16=Drop Bottom Lens (250W maximum)CB12=Conical Bottom Lens for 12" RefractorCB16=Conical Bottom Lens for 16" RefractorDC2=Concentric Dome 300 7

DA2=Angle Dome 300 7

11 5/16" [208mm]

4"[102mm]

13 1/2"[344mm]

15 3/16"[386mm]

11 5/16" [208mm] 12 7/16" [316mm]16 7/32" [412mm]

Compact Fluorescent

H.I.D. H.I.D. w/Reflector

5 9/16"[142mm] 13 1/16"

[332mm]16 5/16"[415mm]

Lamp Type

90°C *40°C

40°C (100W)

25°C (150 & 175W)

SupplyWire (Min.)

AmbientEnvironment

CFL (42-57W)

HID (70-175W)

NOTES: * Internal Wiring. Wiring in External J-Box is 90°C.

105°C *

VLVAPORTIGHT

LARGE


H i g h P r e s s u r e S o d i u m



INDUSTRIAL S A F E T Y A N D S E C U R I T Y

L U M I N A I R E

IND

US

TR

IAL

COOPER LIGHTING39


• Low voltage output controlsup to 25 LumaWatt-equipped fixtures

• Allow daisy-chaining ofmultiple controllers

• Terminal block providesinput connections for oneto six passive infrared motion sensors

• Input terminal allows useof user-supplied dry-contact switch. Switchoverrides motion sensors,putting system into highbrightness mode

• Standard transformer accepts 120V or 277Vuser-configurable input.208V, 240V, 347V and480V are also available

• Three front panel lightsshow system status:amber indicates that thecontroller is receivingpower, red indicates thatoutput from the controlleris at full brightness andgreen indicates that output is at low brightness

• Front panel test switch provides same function as remote dry-contactswitch

• CMOS timer maintainssystem in full brightnessmode for a 15 minutewarm-up period whenpower is applied

• Operating temperature2°C (35°F)—55°C (131°F)


The LumaWatt controller acceptsinputs from up to four remote-mounted motion detectors andprovides a low-voltage output capable of controlling up to 25 fixtures. Upon receiving a 24 voltDC signal from an attached motion sensor or dry contactswitch, it switches connected fixtures from low intensity tohigh, providing maximum lightwhen an area is occupied and lowered energy usage when thearea is empty. U.L. listed and CSAcertified.

8 23/32" [221mm]

2 13/32"[61mm]

4 5/8"[117mm]

3 3/4"[95mm]

8 7/8" [225mm]7 15/16" [202mm]

NOTES: 1 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Lighting Representative for availability and orderinginformation. 2 Order separately. 3 Specifications and dimensions are subject to change without notice.


S A M P L E N U M B E R : S A M P L E N U M B E R : C M L - 1 2 0 / 2 7 7

Product FamilyCML=LumaWatt

Control Module

Input Voltage 1, 2

120/277V=User-selectable 120V or 277V input voltage208V240V347V480V

LumaWatt Lamp Input Watts

Wattage High (HW) Low Change (PC)

Metal Halide

1000W 1080 666 38%

400W 455 238 48%

250W 295 162 45%

175W 209 101 52%

Wattage High (HW) Low Change (PC)

High Pressure Sodium

1000W 1100 616 44%

400W 465 215 54%

250W 300 151 50%

150W 196 118 40%

– 2 + + - +

Control#2

Aux.Controller – 2 +

Output

+ - +

Aux.Controller – 2 +

DryContact

CMLLUMAWATT INDUSTRIAL HIDDIMMING SYSTEM

Controls all LumaWattEquipped Lumark HID Industrial Luminaires

C O N T R O L M O D U L E

IND

US

TR

IAL

COOPER LIGHTING 40


• Power to the motion detector (24V DC) is supplied by the controlmodule. The Detector usesa standard galvanizedsteel 4x4 J-box with (1)3/4" and (2) 1/2" knockoutson all four sides for DCcontrol circuit connectionexit. Can be mountedflush to wall or ceiling, orsuspended from conduit

• Provides aiming flexibilitywhen positioning motiondetector

• Available in three coverage patterns, foraisleways, narrow areas or wide areas

• Provides visual indicationof when the sensor is detecting motion

• Bank of five DIP switchescontrols amount of timethat system stays at fullbrightness after motion in an area ceases

• Up to four motion detectors can be daiseychained together per controller

• Use in conjunction with“HL” or “HC” option onluminaires


LumaWatt motion detectorswork in conjunction with theLumaWatt controller and fixture dimmers to provide bi-level lighting control basedupon an area’s occupancy. Motion detectors are passiveinfrared type and react tochanges in infrared energy(heat) within the coverage area.

Excellent for controlling energycosts in any area occupied lessthan 100% of the time. Ratedfor use in 55°C (131°F) ambient environment (performance willdegenerate at ambient temperatures above 35°C(95°F), requiring higher sensitivity settings and shortening coverage areas).

NOTES: 1 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 2 Add as suffix toany Lumark indoor industrial fixture. 3 30 second time delay when switching from bright to dim. 4 Order separately. 5 See separate cut sheet for full detailson control module. 6 Specifications and dimensions are subject to change without notice.


S A M P L E N U M B E R : S A M P L E N U M B E R : I R M D - N - 2 4 V

Product FamilyIRMD=LumaWatt Infrared

Motion Detector

CoverageA=AislewayN=NarrowW=Wide

Input Voltage 124V=24V

4"[102mm]

2 1/4" [57mm] 2" [51mm]

4" [102mm]

3 5/16" [84mm]

3 5/16"[84mm]

2" [51mm]

15 ft.

0 ft.

FIG. 1 IRMD-A / IRMD-A-24VInfrared Motion Detector / Aisleway Coverage / Ceiling Mounted / 30' MountingHeight (Dotted lines indicate coverage areafor 15' mounting height)

FIG. 2 IRMD-W / IRMD-W-24VInfrared Motion Detector / Wide Coverage /Wall Mounted / 10' Mounting Height

FIG. 3 IRMD-N / IRMD-N-24VInfrared Motion Detector / Narrow overage / Wall Mounted / 10' MountingHeight

67 ft.

15 ft.

30 ft.

67 ft.38 ft.

33.5 ft. 33.5 ft.

38 ft.21 ft. 21 ft.10 ft. 10 ft.0 ft.

FIG. 2 (S ide V iew)

FIG. 3 (Top V iew)

FIG. 1 (Top V iew)

FIG. 1 (S ide V iew)

FIG. 3 (S Ide V iew)

FIG. 2 (Top V iew)

6' 14' 16' 80 ft. 90 ft.50 ft.

10 ft.

18 ft.

6 ft. 15 ft. 25 ft. 50 ft.

10 ft.

IRMDLUMAWATT

INDUSTRIAL HIDDIMMING SYSTEM

I N F R A R E DM O T I O N D E T E C T O R

IND

US

TR

IAL

COOPER LIGHTING41


• Sensor is wired directly to the luminaire and operates on 120V withMagnetic CWA HID ballast systems. The detector is pre-wired andmounted to junction box.Ballast assembly shippedwith wiring compartmentfor connection to ballast.Specify “HSW” optionsfor Magnetic H.I.D. luminaires and openand enclosed Steeler and Benchmark luminaires

• Unit comes with all necessary hardware tomount to a wide varietyof open or enclosed optical assemblies. Consult individual specification sheets forcompatibility and ordering logic

• 360° viewing allows coverage between luminaires. Ideal formounting heights from15-45 feet

• Green LED provides visual indication of whenthe sensor is detectingmotion

• Luminaire ships with 15 minute start up timer. Sensors can be adjustedfrom 30 seconds to 20minutes

• Standard sensor operates from -10°C to 55°C. LowTemperature option (LT)operates from -40°C to55°C. Relative humidity of 20%-90%, non-condensing


LumaWatt motion detector worksin conjunction with fixture dimmers to provide bi-level control based on an area’s occupancy. Motion detector ispassive infrared type and reacts to changes in infrared energy(heat) within the coverage area.

NOTES: 1 Consult individual luminaire specification sheets for compatibility and ordering information. 2 Specifications and dimensions are subject to change without notice.

O R D E R I N G I N F O R M A T I O N 1

S A M P L E N U M B E R : S A M P L E N U M B E R : M H S S - S A 1 8 - M - 4 0 0 - M T - H S W

O P T I O N SHSW=Integral LumaWatt Sensor and with Wide Distribution Control for CWA Magnetic Ballast

45

40

35

30

25

20

15

10

5

0

30 20 10 0 10 20 30| | | | | | |

C O V E R A G E P A T T E R N

IRMS INDIVIDUAL FIXTURE CONTROL OPTION

I N F R A R E D I N T E G R A LM O T I O N S E N S O R

IND

US

TR

IAL O

PT

ION

S +

AC

CE

SS

OR

IES

COOPER LIGHTING 42

COOPER LIGHTING - LUMARKO P T I O N D E S C R I P T I O N S

Lumark offers a full complement of options and accessories that allow the products to be customized to particular applications or installations. Optionsshould be listed in the order shown at end of the part number and separated by dashes. See Steeler and Benchmark chart for housing/optical compatibility.

PS [Protective Starter] Prevents damage to the ballast or related system wiring by disconnecting the ignitor if a lamp has failed or is missing. Operates withHigh Pressure Sodium and Pulse Start Metal Halide lamps up to 1000W.

P [Pre-set Socket Position from the factory] Shipped pre-set for specified distribution from factory.

OR [Open Rated Socket] Required in applications where open rated restricted base lamps must be used. Socket is "Pink" to denote open rated lamp baseonly. See lamp manufactures for additional information.

SS [Space Saver] Same as remote mount but optical shipped with loop and 3' cord with for easy connection to ballast housing.

QB [Quiet Ballast] Potted ballast eliminates ballast noise associated with traditional Magnetic Core and Coil ballast. Ideal for applications where eliminationof secondary noise is needed such as gymnasiums and multi-purpose areas. Available on the Benchmark ballast housing only. Available on 250-1000Wballast only.

DL100 [100% Downlight] Available on SA18 or SA23 aluminum reflectors only.

QD [Quick Disconnect] Die-cast Pendant Mount Box—Specify Single Voltage (not compatible with PC3, PHC, C3, MWS, RM or HC). Full Load Disconnectmodule allows for removal of luminaire while circuit is still energized. U.L. listed as a load-break device.

RM [Remote Mount] Ballast and reflector mounting bracket can be hard wired and installed separate. Allows the ballast to be mounted at further distanceor allow for overall reduction in luminaire height. Distance my be limited for certain ballast types and wattages.

TE [Toolless Entry] Available for Benchmark ballast housing only.

HL [LumaWatt Fixture Control Module] Allows low voltage control wire to be daisy-chained between fixtures outside AC conduit run similar to low voltageintercom’s, fire alarms and phone systems.

HC [LumaWatt Fixture Control Module] Low voltage leads pulled out of top connection box for areas requiring all wiring to be installed in conduit.

HSW [LumaWatt Integrated Sensor Control] Allows use with CWA magnetic ballast and integrated 120V sensor.

Q [Quartz Restrike DC Bayonet Base] Lamp strikes after momentary power interruption that causes the main HID lamp to extinguish. Lamp will stay onuntil HID lamp restrikes. Quartz lamp will not come on at initial cold start.

EM [Quartz Restrike with "Delay Relay"] Same as “Q” option but lamp strikes at both hot and cold starts. Lamp stays on for two minutes to allow lamp toget to full brightness.

EM/SC [Quartz Restrike wired for Separate Circuit] Allow quartz lamp socket to be wired to separate 120V emergency power system.

F1 [Single Fuse (120, 277 or 347V only)] In-line fusing isolates inoperative luminaires from circuit and protects luminaires from in-rush current flow. All fusing on industrial luminaires is external for easy access and maintenance.

F2 [Double Fuse (208, 240 or 480V only)] In-line fusing isolates inoperative luminaires from circuit and protects luminaires from in-rush current flow. All fusing on industrial luminaires is external for easy access and maintenance.

VI [Visual Indicator] Externally mounted LED signal allows quick diagnostic from ground to determine lamp or ballast failure. The LED will flash which indicates lamp failure. The LED does not light which indicates probable ballast failure. Available in 175-400W Metal Halide, 50-400W High PressureSodium and 50-450W Pulse Start Metal Halide.

FILT [Sintered Bronze Filter] Allows Enclosed and Gasketed luminaires to breathe during start-up and shutdown times. Sintered bronze filter prevents theentrance of contaminants. Not offered with “WL” option.

FH-1 [Die-cast Aluminum Fixture Hook] with 3/4" threads for easy installation. Can also be ordered separately as an accessory.

FL-1 [Malleable Iron Plated Fixture Loop] with 3/4" threads for easy installation. Can also be ordered separately as an accessory.

SHK [Die-cast Aluminum Fixture Hook] with safety screw and 3/4" threads for easy installation. Can also be ordered separately as an accessory.

PC3-XXXV [3' cord with NEMA plug] (120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 277V-L7-15P 347V-L37-20P, AND 480V-L8-20P) Other cord lengths are avail-able by specifying length (PC6 for 6' cord). Requires FH-1, SHK or FL-1. EXAMPLE: PC3-120V. Can also be ordered separately as an accessory.

PHC-XXXV [Power Cord and Plug] 18" Power Cord and Non-NEMA plug configuration. Must be used with FL-1, SHK and TPPH (Thru-Way Pendant PowerHook). Can also be ordered separately as an accessory.

IND

US

TR

IAL O

PT

ION

S +

AC

CE

SS

OR

IES

COOPER LIGHTING43


PHC-XXX-NEMA [Power Cord and NEMA Plug] 18" Power Cord and 20 Amp NEMA plug configuration. Must be used with FL-1, SHK and TPPH-NEMA (Thru-Way Pendant Power Hook). EXAMPLE: PHC-120V-NEMA. Can also be ordered separately as an accessory.

C3 [3' Cord with no plug] Must use with FH-1, SHK or FL-1. Can also be ordered separately as an accessory.

MWS [Modular Wiring Systems] Can also be ordered separately as an accessory.

SCF 3' Aircraft Safety Cable secures housing to ceiling. Alternative lengths available. EXAMPLE: SCF6=6' Cable.

SCR Aircraft Safety Cable for housing to reflector.

L/TCB [Less Top Connector box] Housing shipped less top connector box. Used when using TWMBS (Steeler Family) and TW (Benchmark Family) accessories.

LL [Lamp Included] Specified for lamp to ship with order. Lamp is Cooper designated product based on luminaire requirements. Lamp is shipped separatefrom luminaire unless otherwise noted.

QLL [Quartz Lamp Included] Can be specified when Q, EM or EM/SC option is included. Specified for lamp to ship with order. Lamp is Cooper designatedproduct based on luminaire requirements. Lamp is shipped separate from luminaire unless otherwise noted.

WL [Wet Location Listed Luminaires] U.L. listed and CSA certified for wet locations. Check chart for availability. Not available with all options and accessories. Consult product specification sheets for more details.

WLB U.L. Labeled for Wet Locations with Die-Cast Box for 3/4" Conduit Entry (Vertimark II Only).

WLD U.L. Labeled for Wet Locations with Quick Disconnect (Vertimark II Only).

WLP U.L. Labeled for Wet Locations Suitable for Surface or 4" J-Box Mounting (Vertimark II Only).

WG [Wire Guard] Wire Guard factory installed. Available on ENGR16 & ENGR21 only. Must be specified with the fixture.

WG18 [Wire Guard] Wire Guard factory installed. Available on ENSA18 only. Must be specified with the fixture.

WG23 [Wire Guard] Wire Guard factory installed. Available on ENSA23 only. Must be specified with the fixture.

L e n s e s + W i r e G u a r d A c c e s s o r i e s [ o r d e r s e p a r a t e l y ] 1

Aluminum [High-Bays]

SGB15 Safety Glass Bottom for SA15 (not compatible with “WG15”) 2


SGB19 Safety Glass Bottom for AV19 (not compatible with “WG19”) 2


WG15 Wire Guard for SA15 (not compatible with “SGB15”)


WG19 Wire Guard for AV19 (not compatible with “SGB19”)


WG15/GLC Gym Wire Guard w/ Safety Glass for SA15 2


WG19/GLC Gym Wire Guard w/ Safety Glass for AV19 2


Aluminum [Low-Bays]

WG22/EP Wire Guard for 22" Enterprise

WG28/EP Wire Guard for 28" Enterprise

WG/LM Wire Guard for Apollo

Borosilicate Glass

GFWG16/WG Glass Full Wire Guard for Open GR16 (SGB not Included)

GFWG21/WG Glass Full Wire Guard for Open GR21 (SGB not Included)

GTWG16 Top Full Wire Guard 16" Refractor for GR16 & ENGR16

GTWG21 Top Full Wire Guard 21" Refractor for GR21 & ENGR21

SGB16/GR 16" Safety Glass Bottom for Open GR16 2

SGB21/GR 21" Safety Glass Bottom for Open GR21 2

WG16/GR Wire Guard for 16" Refractor for Open GR16

WG21/GR Wire Guard for 21" Refractor for Open GR21

WG16/GLC/GR Wire Guard with Safety Glass Bottom for Open 16" Refractor

WG21/GLC/GR Wire Guard with Safety Glass Bottom for Open 21" Refractor

NOTE: 1 Wire guards and lens enclosures should be used for any application needing additional protection such as gymnasiums. 2 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp.

IND

US

TR

IAL O

PT

ION

S +

AC

CE

SS

OR

IES

COOPER LIGHTING 44


L e n s e s + W i r e G u a r d A c c e s s o r i e s [ o r d e r s e p a r a t e l y ] 1

Prismatic Acrylic

CB22 Conical Bottom Lens for 22" Refractor for PD22 and ER22 (400W maximum)

DB16 Drop Lens for 16" Refractor for PD16 (250W maximum)

DB22 Drop Lens for 22" Refractor for PD22 and ER22 (400W maximum)

DB25 Drop Lens for 25" Refractor for PD25 (400W maximum)

FWG16/WG16 Full Wire Guard for PD16 ("SGB" not included)

FWG22/WG22 Full Wire Guard for PD22 and ER22 ("SGB" not included)

FWG25/WG25 Full Wire Guard for PD25 ("SGB" not included)

FWG16/WG16/SGB16 Full Wire Guard for 16" Refractor & SGB16 lens



FWG22/WG22/WDB [Full Wire Guard] Full Wire Guard for use with DB22 Drop Lens for PD 22" Refractor ("DB22" not included)

FWG25/WG25/WDB [Full Wire Guard] Full Wire Guard for use with DB25 Drop Lens for PD 25" Refractor ("DB25" not included)

SGB16 Safety Glass Bottom for 16" Refractor (not compatible with “WG”) (250W maximum) 1



WG16 Wire Guard for 16" Refractor (not compatible with “SGB”)



WGD16 Wire Guard for DB16



WG16/SGB Gym Wire Guard with Safety Glass Bottom for 16" Refractor (250W maximum) 1



M o u n t i n g A c c e s s o r i e s [ o r d e r s e p a r a t e l y ]

TWMBS Thru-way Mounting Box (Steeler Only)

TW Thru-way Mounting Box (Benchmark Only)

MBT Twin Mount Bracket (Fixtures must be same voltage and withouthooks, loops or plugs)

TPPH-XXXV-NEMA Thru-way Pendant Power Hook. Requires FL-1, SHK and PHC-XXXV-NEMA. Specify Voltage

TPPH-XXXV Thru-Way Pendant Power Hook Requires FL-1, SHK and PHC.Specify Voltage

TPPH-F-XXXV Thru-Way Pendant Power Hook–Single Fuse, 120, 277 or 347Volt. Requires FL-1, SHK and PHC. Specify Voltage

TPPH-F2-XXXV Thru-Way Pendant Power Hook–Double Fused, 208, 240 or480 Volt. Requires FL-1, SHK and PHC. Specify Voltage

TPPH-F-QD-XXXV Thru-Way Pendant Power Hook–Single Fuse, QuickDisconnect. Requires FL-1, SHK and PHC. Specify Voltage

TPPH-F2-QD-XXXV Thru-Way Pendant Power Hook–Double Fused, QuickDisconnect. Requires FL-1, SHK and PHC. Specify Voltage

D e c o r a t i v e S h a d e s [ o r d e r s e p a r a t e l y ]

Catalog Shade (A) (A) (B) (B) FixtureNumber Description Inches Metric Inches Metric ReflectorSizeS51003 Round Decorative 17 1/2" 44.45 cm 17" 43.18 cm 15"S51004 Round Decorative 17 1/2" 44.45 cm 27 1/2" 69.85 cm 15"S51005 Round Decorative 20 1/2" 52.07 cm 27 1/2" 69.85 cm 18"S51006 Round Decorative 25 1/2" 64.77 cm 34 1/2" 87.63 cm 23"S51103 Square Decorative 17 1/2" 44.45 cm 17" 43.18 cm 15"S51104 Square Decorative 17 1/2" 44.45 cm 27 1/2" 69.85 cm 15"S51105 Square Decorative 20 1/2" 52.07 cm 27 1/2" 69.85 cm 18"S51106 Square Decorative 25 1/2" 64.77 cm 34 1/2" 87.63 cm 23"S51203 Hexagon Decorative 17 1/2" 44.45 cm 17" 43.18 cm 15"S51204 Hexagon Decorative 17 1/2" 44.45 cm 27 1/2" 69.85 cm 15"S51205 Hexagon Decorative 20 1/2" 52.07 cm 27 1/2" 69.85 cm 18"S51206 Hexagon Decorative 25 1/2" 64.77 cm 34 1/2" 87.63 cm 23"NOTE: Has to be installed when fixture is installed. Specify color. EXAMPLE: S51003BLK

NOTE: 1 Wire guards and lens enclosures should be used for any application needing additional protection such as gymnasiums.

IND

US

TR

IAL O

PT

ION

S +

AC

CE

SS

OR

IES

COOPER LIGHTING45

COOPER LIGHTING - LUMARKO P T I O N S C A P A B I L I T Y M A T R I X [ O R D E R S E P A R A T E L Y ]

STEE

LER

HO

USI

NG

SS S

teel

er A

lum

inum

Hig

h-Ba

y •

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

SE E

&G

Alum

inum

Hig

h-Ba

y •

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

SS E

cono

liter

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

SS V

ertX

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

SE V

ertX

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

EP E

nter

pris

e 22

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

•

•

•

•

EP E

nter

pris

e 28

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

•

•

•

•

SG P

rism

atic

Gla

ss H

igh-

Bay

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

• •

•

SE E

&G

Gask

eted

Gla

ss

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

SS P

rism

atic

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

SE E

&G

Gask

eted

Acr

ylic

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

•

SS E

nhan

ced

Refra

ctor

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

• •

•

•

LX P

rism

atic

Dire

ct M

ount

•

• •

• •

• •

• •

• •

•

• •

• •

• •

• •

• •

• •

•

•

•

NO

TE

S:

1 D

ista

nce

may

be

lim

ited

by

bal

last

typ

e. 2

30

seco

nd

tim

e d

elay

wh

en s

wit

chin

g f

rom

bri

gh

t to

dim

. C

on

sult

in

div

idu

al l

amp

man

ufa

ctu

res

reco

mm

end

atio

ns

for

com

pat

ible

lam

ps.

Fo

r u

se w

ith

CW

A b

alla

st o

nly

. 3

No

t av

aila

ble

wit

h H

L o

r H

C o

pti

on

. 4

No

t av

aila

ble

wit

h F

H-1

, FL

-1 o

r S

HK

. 5

No

t av

aila

ble

wit

h

QD

PC

3, C

3, P

HC

or

MW

S.

No

t av

aila

ble

wit

h s

ing

le c

ircu

it M

WS

sp

ecia

l o

rder

. 6

Ava

ilab

le S

A18

an

d S

A23

on

ly.

7 S

tan

dar

d.

8 S

pec

ify

wh

en u

sin

g t

he

TW

MB

S o

r T

W a

cces

sory

. 9

No

t av

aila

ble

wit

h Q

D,

W,

WL

op

tio

n.

10

Hin

ged

an

d l

atch

ed r

efle

cto

r as

sem

bly

req

uir

ed.

PS

P

OR

SS 1

HL 2

HSW

Q

EM

EM/SC 3

F1 (120, 277, 347V)

F2 (208, 240, 480V)

WG

QD 4

FH-1

FL-1

SHK

PC3

PHC

C3

HC 2, 5

DL100 6

SCF

SCR

L/TCB 8

LL

QLL

RM 9

VI

WG18

WG23

FILT

MWS

7

SS

15"

, 18"

& 2

3"

SE

18"

& 2

3"S

S E

cono

liter

S

S V

ertX

SE

E&G

Ver

tXEP

Ent

erpr

ise

SG

16"

& 2

1" P

rism

atic

S

E16

" &

21"

E&

G

SS

16"

, 22"

& 2

5"

Ste

eler

E&G

Ste

eler

p.14

p.15

p.17

22 &

28

Gla

ss H

igh-

Bay

G

lass

Ste

eler

Pris

mat

ic H

igh-

Bay

p.

9p.

11p.

19p.

23p.

25p.

26

SE

22"

E &

GPr

ism

atic

SS

22"

Enh

ance

d R

efra

ctor

LX

22"

& 2

5" P

rism

atic

A

cryl

ic S

teel

er

Hig

h-B

ay S

teel

erD

irec

t-M

ount

Ste

eler

p.

29p.

31p.

33

IND

US

TR

IAL O

PT

ION

S +

AC

CE

SS

OR

IES

COOPER LIGHTING 46

COOPER LIGHTING - LUMARKO P T I O N S C A P A B I L I T Y M A T R I X [ O R D E R S E P A R A T E L Y ]

BEN

CHM

ARK

HOUS

ING

HB B

ench

mar

k •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

EB E

&G A

lum

inum

Hig

h-Ba

y •

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

•

• •

•

• •

•

UB B

ench

mar

k Up

light

•

•

•

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

• •

•

HB V

ertX

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

• •

•

EB V

ertX

•

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

• •

•

•

RB L

ow-B

ay

•

•

• •

•

• •

• •

• •

• •

• •

• •

•

• •

• •

• •

•

• •

GB P

rism

atic

Gla

ss H

igh-

Bay

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

•

•

•

•

EB E

&G G

aske

ted

Glas

s

•

•

• •

• •

• •

• •

• •

• •

• •

• •

•

• •

• •

• •

•

• •

• •

HB P

rism

atic

Acr

ylic

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

• •

• •

•

EB E

&G G

aske

ted

Acry

lic

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

• •

•

•

•

• •

HB E

nhan

ced

Refra

ctor

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

• •

• •

•

XB P

rism

atic

Dire

ct-M

ount

•

•

• •

• •

• •

• •

• •

• •

• •

• •

• •

•

•

• •

•

•

OTHE

R HO

USIN

GS

VF V

ertim

ark

•

•

•

• •

• •

• •

• •

• •

•

•

• •

• •

•

BE V

ertim

ark

II

•

•

• •

• •

•

•

• •

• •

• •

•

•

• •

•

• •

• •

NO

TE

S: 1

Dis

tan

ce m

y b

e li

mit

ed b

y b

alla

st t

ype.

2 3

0 se

con

d t

ime

del

ay w

hen

sw

itch

ing

fro

m b

rig

ht

to d

im.

Co

nsu

lt i

nd

ivid

ual

lam

p m

anu

fact

ure

s re

com

men

dat

ion

s fo

r co

mp

atib

le l

amp

s. F

or

use

wit

h C

WA

bal

last

on

ly.

3 N

ot

avai

lab

le w

ith

HL

or

HC

op

tio

n.

4 N

ot

avai

lab

le w

ith

FH

-1,

FL-1

or

SH

K.

5 N

ot

avai

lab

le w

ith

QD

PC

3,

C

3, P

HC

or

MW

S.

No

t av

aila

ble

wit

h s

ing

le c

ircu

it M

WS

sp

ecia

l o

rder

. 6

Ava

ilab

le S

A18

an

d S

A23

on

ly.

7 S

tan

dar

d.

8 S

pec

ify

wh

en u

sin

g t

he

TW

MB

S o

r T

W a

cces

sory

. 9

No

t av

aila

ble

wit

h Q

D, W

, WL

op

tio

n.

PS

P

OR

SS 1

QB

HL 2

HSW

Q

EM

EM/SC 3

F1 (120, 277, 347V)

F2 (208, 240, 480V)

VI

QD 4

FH-1

FL-1

SHK

PC3

PHC

C3

HC 2, 5

DL100 6

SCF

SCR 7

L/TCB 8

LL

QLL

WL

WLB

WLD

WLP

TE

RM 9

WG

WG18

WG23

FILT

MWS

P [Vertimark II]

7

HB

Hig

h-B

ayEB

18"

& 2

3" E

&G

U

B B

ench

mar

k U

plig

htH

B V

ertX

EB E

&G

Ver

tXR

B L

ow-B

ayG

B 1

6" &

21"

Pri

smat

icEB

16"

& 2

1" E

&G

H

B 1

6", 2

2" &

25"

B

ench

mar

kB

ench

mar

kp.

13p.

16p.

18B

ench

mar

kG

lass

Ben

chm

ark

Gla

ss B

ench

mar

k Pr

ism

atic

Ben

chm

ark

p.10

p.12

p.20

p.24

p.26

p.28

EB 2

2" E

&G

Pri

smat

icH

B 2

2" E

nhan

ced

Ref

ract

orX

B 2

2" &

25"

Pri

smat

ic

VF

Ver

timar

kB

E V

ertim

ark

IID

P A

XIO

Ser

ies

Acr

ylic

Ben

chm

ark

Hig

h-B

ay B

ench

mar

k D

irec

t-M

ount

Ben

chm

ark

p.21

p.22

[Com

pact

Flu

ores

cent

]p.

30p.

32p.

34p.

35

CO

MM

ER

CIA

L

COOPER LIGHTING47


SAMPLE NUMBER: MHQC-QCSA18-C-175-T-120V-QMGL

Lamp Type 1

MP=Pulse Start Metal Halide

MH=Metal Halide

SeriesQC=Quadra-Mark

Reflector TypeQCSA18=18"

DistributionC=ConcentratedM=MediumW=Wide

Lamp WattageMP175=175W200=200W250=250W320=320W350=350W400=400WMH175=175W250=250W400=400W

MountingT=T Bar

Voltage 2

120V208V 3

240V 3

277V347V480V 3

Options

(See Below)

24" [610mm] Sq.

19 3/32"[485mm]

D I M E N S I O N S

• UL Listed. CSA Certified.EISA Compliant

• Heavy-duty die-cast aluminum socket housing, finished withwhite polyester powdercoat, allows full adjustment of socket assembly for a variety of distributions from concentrated to wide

• Computer-designed spun aluminum facetedreflector offers maximumlight output with minimum voltage rise

• The thermally protected,high power factor 60HzMetal Halide ballast isU.L. listed

• Prime cold-rolled steelpan is die-formed formaximum rigidity andhas a 45° angled liparound the reflector opening to help reduceglare. It is finished with a white polyester powdercoat and mounts easilyinto inverted T-bar ceilings



The Lumark Quadra-Mark is designed for easy installation onmain T-bars or can be hung bywires in lay-in ceilings with 2' x 2'tiles.

The Quadra-Mark provides excellent distribution with minimal glare for use in supermarkets, hardware stores,auto showrooms, airport terminals, shopping malls andother areas with high ceilings requiring performance and aesthetics.

NOTES: 1 Approved lamp containment barrier required when enclosed rated MP and MH lamps are used. 2005 NEC code requires that open luminaires must utilize asafety glass bottom (SGB) accessory or an open rated socket (OR) and lamp. 2 Products also available in non-US voltages and 50Hz for international markets.Consult factory for availability and ordering information. 88% EISA compliant MP fixtures not available in 347V. 3 Not available in Canada. 4 Add as suffix in theorder shown. 5 Not available with HC or HL. 6 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements.Specified lamps must be ordered as a separate line item. 7 Not available with EM or EM/SC. 8 Requires relamping of unit from above ceiling plane. 9 Specifications and dimensions subject to change without notice.

Options 4

OR=Open Rated Socket for MH LampsQ=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike with ''Delay Relay'' (Quartz lamp strikes at both hot and cold starts) 5

EM/SC=Emergency Separate CircuitLL=Lamp Included 6

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)HL=LumaWatt Fixture Control Module (Allows low voltage control wire to be daisy-chained between fixtures outside AC conduit

run similar to low voltage intercom’s, fire alarms and phone systems) 7

HC=LumaWatt Fixture Control Module (Low voltage leads pulled out of top connection box for areas requiring all wiring to be installed inconduit) 7

DL=U.L. Labeled for Damp LocationsQMGL=Safety Glass Lens 8

WG/QC=Wire GuardQMGL/WG=Safety Glass Lens with Wire Guard 8


Lamp Type WattagePulse Start Metal Halide (MP) 175, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400W

QCQUADRA-MARK

175-400WPulse Start Metal HalideMetal Halide

R E C E S S E D C O M M E R C I A L

CO

MM

ER

CIA

L

COOPER LIGHTING 48



• Die-formed heavy-dutyhousing is made of cold-rolled steel and finished in highly reflective white polyesterpowder coat. Stampedsteel ballast mountingbracket is integral part of housing

• Die-formed steel reflectorhas removable panels foreasy ballast access frombelow

• Die-formed heavy-gaugesteel frame can be hingedand latched from eitherside. Stamped steel retaining clips assureflush fit of lens with frame

• Nine- or 16-cell, 4" deep,regressed specular louvers


D I M E N S I O N S D E S C R I P T I O N

The Lumark Quadra-Lume is perfect for applications which call for reliable, affordable illumination with minimal maintenance. Quadra-Lume is designed for easy installation onmain T-bars or can be hung bywires in lay-in ceilings with 2' x 2'tiles.

The Quadra-Lume provides minimum surface brightness, excellent uniformity and gentlediffusion. It is ideal for use in department stores, banks, autoshowrooms, schools, libraries, office buildings and auditoriums.

NOTES: 1 Fixtures with Metal Halide lamps MUST have glass overlay (GL). 2 150, 175, 200, 250, 320, 350 and 400W only. 3 All lamps are mogul-base. 150W-MH areavailable medium-base. 4 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 88% efficient EISA compliant MP fixtures not available in 347V. 5 Add as suffix in the order shown. 6 120/277V Metal Halide only. 7 Not available with HC or HL. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lampsmust be ordered as a separate line item. 9 Adds 3 1/4" to overall fixture height. 10 Requires vertical lamp option (VL). 11 Not available with EM or EM/SC. 12 Order separately. 13 Not available with FTA, FTB or FTW. 14 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MHQP-S4/9 -400-120-Q

Lamp TypeMP=Pulse

Start Metal Halide 1, 2

MH=Metal Halide 1

HP=HighPressure Sodium

SeriesQP=Quadra-Lume

w/ SpecularLouvers

Louver ColorS4=Silver Louver,

4" Deep

Louver Size/9=Nine-cell Louver/9/GL=Nine-cell Louver

with Glass Overlay/16=16-cell Louver/16/GL=16-cell Louver

with Glass Overlay

Lamp Wattage 3

MP70=70W100=100W175=175W200=200W250=250W320=320W350=350W400=400WMH175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 4

120V208V240V277V347V480V

Options &Accessories

(See Below)

Options 5

OR=Open Rated Socket for MH LampsQB=Quiet Ballast 6

Q=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike with ''Delay Relay''

(Quartz lamp strikes at both hot and cold starts) 7


SCF=3' Aircraft Safety Cable Secures Housing to Ceiling (Alternative lengths available. Ex: SCF6=6' Cable)

BDF=Black Door FrameG2=Double Gasketing Doors (Door to Lens, Lens to Door)VL=Vertical Lamp 9

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)HL=LumaWatt Fixture Control Module (Allows low voltage control

wire to be daisy-chained between fixtures outside AC conduit run similar to low voltage intercom’s, fire alarms and phone systems) 10, 11

HC=LumaWatt Fixture Control Module (Low voltage leads pulledout of top connection box for areas requiring all wiring to beinstalled in conduit) 10, 11

DL=U.L. Labeled for Damp Locations

Accessories 12

WGQF=Wire Guard 13

FTA=Flush Drywall Frame Kit, Natural Anodized AluminumFTB=Flush Drywall Frame Kit, BlackFTW=Flush Drywall Frame Kit, White

14 5/8" [371mm]

23 7/8" [606mm]

Lamp Type WattagePulse Start Metal Halide (MP) 70, 100, 175, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400W

QPQUADRA-LUME



R E C E S S E D C O M M E R C I A LW I T H S P E C U L A R

L O U V E R S

CO

MM

ER

CIA

L

COOPER LIGHTING49


SAMPLE NUMBER: MHQF-GS-C73-400-120V-Q

Lamp TypeMP=Pulse


MH=Metal Halide 1


SeriesQF=Quadra-Lume

w/ Flat Lens

Door FrameGS/=Flat SteelGO/GAS/=Flat AluminumGMXF/=Flat, Non-floating

Aluminum Door Frame

GMXR/=3/8" Regressed Non-floating Aluminum Door Frame

Lens Type 1

A=AcrylicA/GL=Acrylic with

Glass OverlayACTF.140=Acrituf,

.140" thickACTF.187=Acrituf,

.187" thickH8246=Holophane 8246C73=Prismatic Tempered

Glass LensPL=Polycarbonate

Lamp Wattage 3


Voltage 4

120V208V240V277V347V


(See Below)

11" [279mm]

23 7/8" [606mm]

D I M E N S I O N S


• Die-formed heavy-dutyhousing is made of cold-rolled steel and finishedin highly reflective whitepolyester powder coat.Stamped steel ballastmounting bracket is integral part of housing



• Gasketed flat prismaticacrylic, acrituf or C73glass lens





NOTES: 1 Fixtures with Metal Halide lamps MUST have protective glass lens (C73) or glass overlay (GL). 2 200, 250, 320, 350 and 400W only. 3 All lamps are mogul-base. 150W-MH and lower are available medium-base. 4 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 88% EISA complaint MP fixtures not available in 347V. 5 Add as suffix in the order shown. 6 120/277V MetalHalide only. 7 Not compatible with HC or HL. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 9 Adds 3 1/4" to overall fixture height. 10 Requires vertical lamp option (VL). 11 Not compatible with EM or EM/SC. 12 Order separately. 13 Not available with FTA, FTB or FTW. 14 Specifications and dimensions subject to change without notice.

Options 5



(Quartz lamp strikes at both hot and cold starts) 7EM/SC=Emergency Separate CircuitLL=Lamp Included 8

SCF=3' Aircraft Safety Cable Secures Housing to Ceiling (Alternativelengths available. Ex: SCF6=6' Cable)

BDF=Black Door FrameG2=Double Gasketing Doors (Door to Lens, Lens to Door)VL=Vertical Lamp 9F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)HL=LumaWatt Fixture Control Module (Allows low voltage control


HC=LumaWatt Fixture Control Module(Low voltage leads pulled out of top connection box for areas requiring all wiring to be installed in conduit) 10, 11


Accessories 12

WGQF=Wire Guard 13




QFQUADRA-LUME

70-400WHigh Pressure SodiumPulse Start Metal HalideMetal Halide

R E C E S S E D C O M M E R C I A LW I T H F L A T L E N S

CO

MM

ER

CIA

L

COOPER LIGHTING 50



• Die-formed heavy-dutyhousing is made of cold-rolled steel and finishedin highly reflective whitepolyester powder coat.Stamped steel ballastmounting bracket is integral part of housing



• Virgin acrylic prismaticdrop lens with UV inhibitor





NOTES: 1 Fixtures with Metal Halide lamps MUST have glass overlay (GL). 2 200, 250, 320, 350 and 400W only. 3 All lamps are mogul-base. 150W MH and lower areavailable medium-base. 4 Pulse Start Metal Halide only. 5 Products also available in non-US voltages and 50Hz for international markets. Consult factory foravailability and ordering information. 88% EISA complaint MP fixtures not available in 347V. 6 Add as suffix in the order shown. 7 120/277V Metal Halideonly. 8 Not compatible with HC or HL. 9 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements.Specified lamps must be ordered as a separate line item. 10 Adds 3 1/4" to overall fixture height. 11 Requires vertical lamp option (VL). 12 Not compatiblewith EM or EM/SC. 13 Order separately. 14 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MHQD-GO/GAS/A-400-120V-Q

Lamp TypeMP=Pulse


MH=Metal Halide 1


SeriesQD=Quadra-Lume

w/ Drop Lens

Door FrameGO/GAS/=Flat

Aluminum

Lens Type 1A=Acrylic LensA/GL=Acrylic Lens with

Glass OverlayP=Polycarbonate LensP/GL=Polycarbonate

Lens with Glass Over-lay

Lamp Wattage 3


Voltage 5

120V208V240V277V347V


(See Below)

Options 6





SCF=3' Aircraft Safety Cable Secures Housing to Ceiling (Alternativelengths available. Ex: SCF6=6' Cable)

BDF=Black Door FrameG2=Double Gasketing Doors (Door to Lens, Lens to Door)VL=Vertical Lamp 10

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)HL=LumaWatt Fixture Control Module (Allows low voltage control


HC=LumaWatt Fixture Control Module(Low voltage leads pulled out of top connection box for areas requiring all wiring to be installed inconduit) 11, 12


Accessories 13


23 7/8" [606mm]

14 1/2"[368mm]


QDQUADRA-LUME



R E C E S S E D C O M M E R C I A LW I T H D R O P L E N S

CA

NO

PY

COOPER LIGHTING51

D I M E N S I O N S

• UL Wet Location Listed.CSA Certified. EISA Compliant

• CL housing is constructedof heavy-gauge aluminum with weldedcorners providing goodheat dissipation. CS housing is constructed of durable steel weldedconstruction

• Weather- and abrasion-resistant white polyesterpowder coat finish

• Fully gasketed door frameseals out contaminants

• High power factor ballastwith class H insulation. CL construction is listed for 40°C ambient environments. CS construction is listed for 25°C ambient environments

• Optical system featuresan injection-molded prismatic lens with internal prisms and whitehighly reflective internalsurface

• Hinged door provideseasy access for maintenance and relamping and door canbe removed to simplifyinstallation



The Lumark Canopy Lightcombines lasting durabilityand excellent photometrics.CSA certified for wet locations.

The Canopy Light mountsquickly to a variety of surfaces,making it ideal for coveredwalkways, conveniencestore/service station canopiesand enclosed parking areas.


S A M P L E N U M B E R : MPCL-400-MT-Q

10"[254mm]

20 15/16" [532mm]Square


Metal Halide 1MH=Metal HalideHP=High Pressure Sodium

SeriesCL=Canopy Light

(Aluminum Housing) 2

CS=Canopy Light(Steel Housing) 3

S T O C K S A M P L E N U M B E R

S A M P L E N U M B E R : MPCL-400-MT-LL

Lamp TypeMP

SeriesCL

Lamp Wattage150250320 1

400 1

VoltageMT

OptionsLL (Lamp Included)

Lamp Wattage 4

MP100=100W150=150W 200=200W250=250W320=320W350=350W400=400WMH175=175W 250=250W 400=400W HP100=100W150=150W 250=250W400=400W

Voltage 6

120V=120V208V=208V240V=240V277V=277V347V=347V 7

480V=480VMT=Multi-Tap


wired 347V 7

Options 8

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)Q=Quartz Restrike (Hot strike only)EM=Quartz Restrike with “Delay Relay”

(Quartz lamp strikes at both hot andcold starts)

C73=Flat Prismatic Tempered Glass LensLL=Lamp Included 9

POM=Position Oriented Socket

CL/CSCANOPY LIGHT


C A N O P Y L I G H TA R E A / S I T E L I G H T

NOTES: Standard Multi-Tap. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information and options. 1 Available without lamp MPCL-320-MT or MPCL-400-MT.

Lamp Type WattagePulse Start Metal Halide (MP) 100, 150, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 100, 150, 250, 400W


NOTES: 1 150, 200, 250, 320, 350, and 400W. 2 40°C Ambient environment, except 400W HP is 25°C ambient. 3 25°C Ambient environment. 4 All lamps are mogul-base except 100W MP and below are medium-base. Lamp not included. 5 175W, 250W, 400W MH is available for non-US markets only. 6 Products also available in non-US voltages and 50HZ for international markets. 7 88% Efficient EISA Compliant MP fixtures not available in 347 and TT voltages. 8 Add as suffix in the order shown. 9 Lamp is shipped separately from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 10 Specifications and dimensions subject to change without notice.


CA

NO

PY

COOPER LIGHTING 52


M O U N T I N G D I M E N S I O N S

• UL Wet Location Listed.CSA Certified

• One-piece injection-molded UV stabilizedpolycarbonate lens is aminimum of 0.130" thick.All light-control prismsand blondels are on the inside surface of the lens,reducing dirt build-up andmaking cleaning easier

• Lens is held with fourstainless steel screws. Fasteners are captive inthe lens and sealed bymeans of a neoprene O-ring

• Die-cast aluminum withreinforcing ribs on exposed sidewalls. Thickened areas occur at lens junction and atmounting/fastening holes.Four 1/2" NPT conduit entries in sides and onein back of housing.

Black polyester powdercoat is standard

• One-piece die-cut closed-cell silicone mounting gasket

• Copper-wound NPF ballast standard. Ballast is available in high powerfactor with some lamps.Consult ordering information

• Porcelain medium-basesocket with nickel-platedbrass screw shell



The Lumark Parker combinesstrength-gaining architecture with energy-saving technology.U.L. listed for wet locations andCSA certified. Mount on non-combustible surface.

The durable, versatile Parker isperfect for use in parking bays,entrances and stairwells, as wellas rapid transit stations and loading docks. PR

PARKER



C L E A R P R I S M A T I C P O L Y C A R B O N A T E

P A R K I N G G A R A G E L U M I N A I R E

7 "[178mm]

3 3/16" [81mm]

NOTES: 1 Uses S-55 (55 Volt) lamp only. 2 175W MH is available for non-US markets only. 3 HPF CWA not available in 70W and 100W MP or HP. High Power Factoris required for all MH and MP products. 4 Products also available in non-US voltages and 50HZ for international markets. 5 Add as suffix in the order shown.6 Lamp is shipped separately from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as aseparate line item. 7 Order separately. 8 Specifications and dimensions subject to change without notice.


S A M P L E N U M B E R : H P P R - 7 0 N - 1 2 0 V - Q


Metal HalideMH=Metal HalideHP=High Pressure

Sodium

SeriesPR=Parker

LampWattageMP70=70W100=100W150=150W MH175=175W 1

HP70=70W100=100W150=150W 2

BallastH=High

Power Factor

N=Normal Power Factor

W=HPF CWA 3

Voltage 4

120V=120V208V=208V240V=240V277V=277V347V=347V480V=480VMT=Multi-Tap


wired 347V

Accessories 7

TK=Trunnion KitVRSD=Tamper-Resistant

ScrewdriverVRSB=Tamper-Resistant

Bit

Options 5

F1=Single Fuse(120, 277 or 347V only)

F2=Double Fuse(208, 240 or 480V only)

TR=Tamper ResistantScrews

Q=Quartz Restrike DC Bayonet Base(Quartz lamp will notcome on at initial coldstart)

LL=Lamp Included 6

QM=Quick Mount

11 5/8" sq. [295mm]

(4) 9/32" Dia. [7mm] Mounting Holes

8 7/16" sq. [214mm]

S T O C K S A M P L E N U M B E R ( L A M P I N C L U D E D )

S A M P L E N U M B E R : MPPR-100H-MT-LL

Lamp TypeMP

SeriesPR

Lamp Wattage100H

VoltageMT

OptionsLL (Lamp Included)

NOTES: Options not available with stock products. Refer to standard order information and options. Refer to In-Stock Guide for availability.

Lamp Type WattagePulse Start Metal Halide (MP) 70, 100,150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 70, 100, 150W


CA

NO

PY

COOPER LIGHTING53

COOPER LIGHTING - LUMARKD I M E N S I O N SD E S C R I P T I O N

Lumark's Park-King sets the standard for parking facility lighting. CSA certified and U.L.listed for wet locations, the ParkKing's self-contained design andvandal-proofing contribute to along service life and low maintenance costs.

By controlling glare and providingexcellent uniformity, the Park-King improves vehicular movement and pedestrian safetyin parking garage facilities.


• One-piece die-cast aluminum housing hassoft-corner design andis finished in polyesterpowder coat

• Clear polycarbonate lensstandard. Optional flattempered glass lens available. Standard andtamper-proof lens screws included

• Hydroformed polishedaluminum reflector provides sharp cutoff insymmetrical square orasymmetrical forwardthrow designs

• Sealed feed-throughwiring compartment withquick-release clamps andhubs on housing sidesand top for 3/4" NPT surface ceiling conduit

• Closed-cell, gas-filled,high-temperature siliconegasketing seals out waterand other external contaminants

• Approximate net weight:14 lbs. (6 kgs.)

NOTES: 1 175W MH is available for non-US markets only. 2 Add as suffix in the order shown. 3 150W maximum quartz lamp. Lamp not included. 4 Lamp is shippedseparately from luminaire. Lamp is Cooper designated product-based on luminaire requirements. Specified lamps must be ordered as a separate line item.5 Fixtures with MP or MH lamps must have glass overlay (G). 6 Order separately. 7 Adds 1-3/4" to fixture height. 8 Specifications and dimensions subject tochange without notice.


Metal Halide MH=Metal HalideHP=High Pressure

Sodium

SeriesPD=Park-King

DistributionS=SymmetricA=Asymmetric

MountingF=Flush

Lamp WattageMP50=50W70=70W100=100W150=150WHP 175=175W 1

MH 35=35W50=50W70=70W100=100W150=150W

Voltage 1

120=120V208=208V240=240V277=277V347=347V480=480VMT=Triple-Tap

wired 277VTT=Multi-Tap

wired 347V


(See Below)


SAMPLE NUMBER: MPPD-A-F-150-120V

Options 2

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)Q=Quartz Restrike (Hot strike only) 3

LL=Lamp Included 4

G=Tempered Flat Glass Lens (Clear) 5

Accessories 6

PDA200=Wire Vandal GuardPDA100XX=Cast Mounting Bracket for Wall or Pole MountingPDA300=Concrete Pour Kit for Recessed MountingPDA400XX=Quick-mount Slide Box Over Standard 4" Junction Box 7

PB120V=Button-type Photocontrol Field Installed (120V only)PB-208/240V=Button-type Photocontrol Field Installed (208/240V only)PB-277V=Button-type Photocontrol Field Installed (277V only)SD2925PK=Screwdriver for Tamper-Resistant Screws

15"[381mm]

11"[279mm]

3 7/8"[98mm]

1 3/4" [44mm]

PDPARK-KING


P A R K I N G G A R A G E L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 150, 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 35, 50, 70, 100, 150W

Voltage ChartDT=Dual-Tap 120/277V (wired 277V)MT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)

FLO

OD

LIG

HT

ING

COOPER LIGHTING 54


O R D E R I N G I N F O R M A T I O N ( L A M P I N C L U D E D )

SAMPLE NUMBER: QZ5L

Lamp TypeQ=Quartz

FixtureZ=Wedge

Lamp Wattage3=300W5=500W

Lamp L=Lamp

Included

Options (add as suffix)W=White

Accessories (order separately)NKS-BZ=2" Slipfitter (Bronze)NKS-WHT=2" Slipfitter (White)

9" [229mm]4"

[102mm]

6 1/4"[159mm]

NOTES: 1 Standard unit has 1/2" NPT threaded knuckle for mounting. 2" slipfitter is available as an accessory. 2 120 Volt operation only. 3 Specifications and dimensions subject to change without notice. 4 Products also available in non-US voltages and 50Hz for international markets.

S P E C I F I C A T I O N F E A T U R E S D E S C R I P T I O N

The Lumark LQL1500 has a heat- and impact-resistant clearglass lens, mounted in a gasketed, die-cast hinged aluminum door with captivescrew fasteners for positive latching. U.L. listed and labeledfor wet locations. CSA certified.

• Captive screw fasteners provide positive weatherproof seal

• Finished in dark bronze paint

• Clear tempered glass lens isheat- and impact-resistant

• Quartz lamp provides whitelight for excellent color rendition

• Die-cast aluminum door is sealed with full-circumference gasketing todie-cast aluminum housinginstallation to J-box and canbe wall or eaves mounted

• Integral hinge design permits hands-free relamping and easy door removal

• Adjustable stem mountingarm fits 1/2" NPT outlet boxcover

• U.L. listed for wet locations. CSA certified

• Approximate net weight: 4.5 lbs. (2.5 kgs.)


The Lumark QZ Wedge is a compact, economical alternativeto traditional outdoor floodlighting. The black or whitefinishes provide lasting durabilitywith optics that deliver optimum beam control. U.L. listed and labeled for wet locations. CSA certified.

• Die-cast aluminum housing finished in black orwhite paint for lasting durability

• Adjustable stem mountingarm fits 1/2" NPS outlet boxcover

• Anodized aluminum reflector provides maximumbeam control and efficiency

• Porcelain lamp sockets for 300-500W quartz lamp

• Heat- and weather-resistant gasketing seals outexternal contaminants

• Hinged door frame has toolless entry latch




SAMPLE NUMBER: LQL1500WL240

Catalog Lamp LampNumber Wattage Type Voltage ColorLQL1500WL240 1500W T3 Quartz 240V Bronze

14 1/2" [362mm]8 3/4"

[222mm]

8 1/4"[210mm]

NOTES: 1 240V T3 lamp included. 2 Specifications and dimensions subject to change without notice. 3 Products also available in non-US voltages and frequenciesfor international markets. 4 Consult your Cooper Lighting Representative for availability and ordering information.

QZ WEDGE

3 0 0 - 5 0 0 WQ u a r t z

F L O O D L I G H T

LQL1500QUARTZ FLOOD

1 5 0 0 W ( M a x . )Q u a r t z

F L O O D L I G H T

[ 2 4 0 V L A M P I N C L U D E D ]

FLO

OD

LIG

HT

ING

COOPER LIGHTING55

COOPER LIGHTING - LUMARKD I M E N S I O N S D E S C R I P T I O N

The Lumark Falcon is a stylish andrugged luminaire that combinesvalue and performance with asoft, architecturally appealingform. This soft rounded corner,die-cast construction is excellentfor applications that have a highvisibility and where a uniformbeam distribution is desired.

The Falcon floodlight can be wallor pole mounted, making it idealfor all commercial, industrial andresidential low wattage floodlighting applications.

• UL Wet Location Listed

• Tempered glass lens isimpact and thermalshock resistant. Easily released die-cast aluminum doorframewith stainless steel toolless latch

• Die-cast aluminum housing is finished inweather and abrasion resistant dark bronzepolyester powder paint.Optional colors are available

• Full-circumference silicone gasket seals outexternal contaminants

• Pulse rated, 4KV, medium-base porcelainlamp socket standard forHID. Electronic compact4-pin fluorescent socketsstandard for CF lamp options

• Formed aluminum hammered reflector optimized beam efficiency and control

• Adjustable ANSI 1G ratedstem mounting arm fits1/2" NPS outlet boxcover. (RBC round outletbox cover not included,order separately). Optional heavy-gaugesteel adjustable trunnionmounting provides additional durabilitywhen required


NOTES: 1 All HID lamps are medium-base 175W MH is available for non-US markets only. 2 HP only. 3 120V only. 4 150W MP available in High Power Factor Ballastonly. High Power Factor Ballast required on all MP, MH and CF products. 5 Products also available in non-US voltages and 50Hz for international markets. 6 Reactor ballasts used for HP lamps when specified. 7 Not available in Canada. 8 Canada only. 9 Compact fluorescent only. In cold temperatures, CompactFluorescent lamps produce lower level illumination levels. 10 Add as suffix in the order shown. 11 100W MP maximum. 12 Order separately, replace XX withcolor suffix. 13 Specifications and dimensions subject to change without notice.

Options 10

LL=Lamp Included (Must Specify SingleWattage with Fluorescent)

TR=Tamper-Resistant ScrewsPE=Internal Photocontrol (Specify Voltage)PC=Button Type PhotocontrolF1=Single Fuse

(120, 277 or 347V. Specify Voltage) 11

F2=Double Fuse (208, 240 or 480V. Specify Voltage) 11

BZ=BronzeBK=BlackWH=WhiteAP=Grey

Accessories 12

FA5-XX=2" Slipfitter for Trunnion FixtureRAB-XX=Right Angle Pipe Bracket for SlipfittersSAB-XX=Steel Angle Bracket for TrunnionPE/MT=Field-Installed PhotocontrolRBC-XX=Round Outlet Box CoverSF/VS=Vandal ShieldSF/WG=Wire GuardTRSD-6/32=Tamper-Resistant ScrewdriverSF/TR=Tamper-Resistant ScrewSF/V-XX=VisorSPK=Landscape Post (Standard Color Dark Grey)


SAMPLE NUMBER: MPSF-T-100H-240V-F2-TR-PE-BZ-LL

Lamp 1


MH=Metal HalideHP=High Pressure

SodiumCF=Compact

Fluorescent

SeriesSF=Falcon

Mounting K=KnuckleT=Trunnion

Lamp Wattage 1

MP50=50W70=70W100=100W150=150W 4

MH175=175W 1

HP35=35W 2, 3

50=50W70=70W100=100W150=150W

CF26=(1) 26W32=(1) 32W42=(1) 42W52=(2) 26W57=(1) 57W60=(1) 60W64=(2) 32W70=(1) 70W

Ballast__=Normal Power

FactorH=High Power

Factor 4

Voltage 5

120V 6

208V 7

240V 7

277V347V 8

480VDT=Dual-TapMT=Multi-Tap wired 277VTT=Triple-Tap wired 347V 8

E= Electronic (120-277V) 9


(See Below)

NOTE: Refer to In-Stock Guide for availability.

S T O C K S A M P L E N U M B E R ( L A M P I N C L U D E D ) : H i g h P r e s s u r e S o d i u m & P u l s e S t a r t M e t a l H a l i d e

SAMPLE NUMBER: MPSF10K-MT


Metal HalideHP=High

Pressure Sodium

SeriesSF=Falcon

Lamp Options70=70W10=100W15=150W

MountingK=KnuckleT=Trunnion

Wiring OptionsDT=Dual Tap

(120/277V)MT=Multi-Tap

NOTES: Options not available with stock products.Order Accessories as separate items forfield installation. Refer to standard ordering information to add options andaccessories. Refer to In-Stock Guide foravailability.

S T O C K S A M P L E N U M B E R ( L A M P I N C L U D E D ) : C o m p a c t F l u o r e s c e n t

SAMPLE NUMBER: CFSF-K-42-E-LL

Lamp TypeCFSF=Compact

FluorescentFalcon

MountingK=Knuckle

Lamp Options42=42W

Wiring OptionsE=Electronic

Ballast

Lamp IncludedLL=Lamp

Included

10 11/16"[272mm]

10 1/2" [267mm] 7 1/2" [189mm]

SF FALCON


26-70WCompact Fluorescent

L O W W A T T A G EF L O O D L I G H T

Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 35, 50, 70, 100, 150WCompact Fluorescent (CF) (1) 26, (1) 32, (1) 42 (2) 26 (1) 57W

(1) 60, (2) 32, (1) 70W

Voltage ChartDT=Dual-Tap 120/277V (wired 277V)MT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)E=Electronic (CF only) 120-277V (wired 277V (50/60 Hz)

FLO

OD

LIG

HT

ING

COOPER LIGHTING 56


NOTE: 1 320W available in MP only.Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information toadd options.


SAMPLE NUMBER: MPXF25T



Sodium

SeriesXF=Falcon

Lamp Wattage25=250W32=320W 1

40=400W

MountingT=Trunnion


• Tempered glass lens isimpact- and thermalshock-resistant. Fourpoint door connectionprovides positive seal tohousing

• Die-cast aluminum housing is finished inweather- and abrasion-resistant dark bronzepolyester powder coat

• Full-circumference silicone gasket seals outexternal contaminants

• 5KV pulse-rated mogul-base porcelainlamp socket for HIDlamps

• Mogul-base lampincluded and available up to 400W HP, MP or MH

• Formed-aluminum reflector optimizes beamefficiency and control

• Polyester powder coatedsteel trunnion mount provides stability and adjustable aiming. Optional slipfitter available (order separately)



The compact die-cast aluminumFalcon floodlight blends well in almost any setting. It features anadjustable trunnion which allowsexceptional mounting flexibilityand light control. U.L. listed andlabeled for wet locations. CSA certified.

The Falcon floodlight can be wall or pole mounted, making itperfect for all commercial, industrial and residential lowwattage floodlighting applications.

10 1/8" [265mm]

14 6/8" [377mm] 13 5/8" [340mm]

1" [25mm]

1 1/2"[38mm]

T R U N N I O N - M O U N T D R I L L P A T T E R N


SAMPLE NUMBER: MPXF25T


Metal HalideMH=Metal

Halide 1


Series 2

XF=FalconLamp Wattage(Lamp Included)MP25=250W32=320W35=350W40=400WMH 1

25=250W40=400WHP25=250W40=400W

Mounting T=Trunnion

Options 3

W=White HousingFinish

Accessories 4

XF/WG=Wire GuardXF/SFXX=SlipfitterXF/FCXX=Side and Top

VisorXF/GSXX=Glass

ReplacementDoor

NOTES: 1 MH available in non-US markets only. 2 Supplied with multi-tap voltages (120/208/240/277V). 3 Add “W” to the end of catalog number for white finish. 4 Order separately. Add “WHT” to the end of accessory number for white finish. (Example: XF/WG-WHT). 5 Specifications and dimensions subject to changewithout notice.

E P A - E f f e c t e d P r o j e c t e d A r e a : .87 Square Feet

Lamp Type WattagePulse Start Metal Halide (MP) 250, 320, 350, 400WMetal Halide (MH) 250,400WHigh Pressure Sodium (HP) 250, 400W

XF FALCON

2 5 0 - 4 0 0 WHigh Pressure Sodium

Pulse Start Meta l Ha l ide Meta l Ha l ide

F L O O D L I G H T

FLO

OD

LIG

HT

ING

COOPER LIGHTING57


NOTES: 1 All HID lamps are medium-base. 2 175W MH is available for non-US markets only. 3 Products also available in non-US voltages and 50Hz for international markets. 4 Compact Fluorescent lamps only, 120-277V with internal fusing. In cold temperatures compact fluorescent lamps produce lower illumination levels.5 Add as suffix in the order shown. 6 Other finish colors available. Consult your Cooper Lighting representative. 7 Order separately, replace XX with color suffix. 8 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPMS-K-HF-150-MT-LL

Lamp Type 1

MP=Pulse StartMetal Halide

MH=Metal Halide 2


CF=CompactFluorescent

SeriesMS=Impact Flood

Small

MountingK=KnuckleT=Trunnion

DistributionHF=Horizontal FloodVF=Vertical Flood

LampWattageMP50=50W70=70W100=100W150=150WMH175=175W 2

HP50=50W70=70W100=100W150=150WCF26=26W32=32W42=42W

Voltage 3

120V208V240V277V347V480VDT=Dual-TapMT=Multi-TapTT=Triple-TapE=Electronic 4

Color 6

__=Bronze(Standard)

WH=WhiteBK=BlackAP=Grey

Accessories 7

MS/JB-XX=Architectural J-BoxMS/SF-XX=SlipfitterMS/TMA-XX=Twin Mount Arm

(EPA .35)MS/WMA-XX=Wall Mount Arm

(EPA .22)MS/WM-XX=Wall MountMS/BD-XX=Barn Doors

(EPA 1.03)MS/TV-XX=Top Visor

(EPA .51)MS/4V-XX=Four Sided

Shield (EPA .87)MS/VS=Vandal ShieldMS/WG=Wire Guard

Options 5

Q=Quartz Restrike(Hot Strike Only)

EM=Quartz Restrikewith “Delay Relay”(Quartz lamp strikes at both hot andcold starts)

EM/SC=EmergencySeparate Circuit

LL=Lamp Included(Must Specify SingleWattage with Fluorescent)

PE=Internal Photocontrol(Specify Voltage)

PC=Button Type PhotocontrolF1=Single Fuse

(120, 277 or 347V. Specify Voltage)F2=Double Fuse

(208, 240 or 480V. Specify Voltage)

NOTES: Horizontal flood optics, knuckle mount, multi-tap ballast and bronze paint are standard for stock products. Add “W” to the end of the catalog logic to specifywhite finish (available on small housing 150W only). Stock accessories only available in bronze finish. Options not available with stock products. Refer to standard ordering information. Refer to In-Stock Guide for availability.

S T O C K S A M P L E N U M B E R ( L a m p I n c l u d e d )

SAMPLE NUMBER: MPMS15

Lamp TypeMP=Pulse

StartMetalHalide

SeriesMS=Impact

Flood Small

Lamp Wattage70=70W10=100W15=150W

Accessories (order separately)MS/TV-BZ=Top VisorMS/4V-BZ=Four Sided ShieldMS/BD-BZ=Barn DoorsMS/WG=Wire Guard

D I M E N S I O N S


• Rugged one-piece die-cast aluminum housing. One-piece extruded silicone gasketseals the optical and electrical compartmentfrom external contaminants

• Die-cast aluminum dooris secured via two (2)tamper resistant stainlesssteel allen head fasteners

• Impact resistant, clear flattempered glass sealed todoor with a one-piece silicone gasket

• Available in horizontal orvertical lamp orientation.Optics feature medium-base lamp holders for HID

• High power factor ballastare heat sunk to housingfor cooler operation andlonger life

• Heavy-duty die-cast aluminum knuckle mountutilizes tooth-lock adjustment mechanismfor solid engagement and ease of aiming. Optional heavy-gauge adjustable steel trunnionmount provides additional durability when required



Impact Flood’s cylindrical form blends effortlessly toarchitectural and landscapeenvironments. Available inwattages up to 175W MetalHalide and High PressureSodium, and up to 42W Compact Fluorescent. ImpactFlood offers properly scaledsolutions for any floodlightingapplication.

Knuckle Mount

Trunnion Mount

15 1/8" [385 mm]

6 11/16" [171 mm]

15 1/8" [385 mm]

13 7/8" [352 mm]

12 5/8" [322 mm]

6 11/16" [171 mm]

3 1/8" [80mm]

1 9/16"[40mm]

17/32" Dia.[14mm]

7/16" Dia.[12mm]

T R U N N I O N D R I L L P A T T E R N

E P A - E f f e c t e d P r o j e c t e d A r e a : 1.12

MS IMPACT FLOODSMALL



A R C H I T E C T U R A LF L O O D L U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 50, 70, 100, 150WCompact Fluorescent (CF) 26, 32, 42W


FLO

OD

LIG

HT

ING

COOPER LIGHTING 58



• Rugged one-piece die-cast aluminum housing. One-piece extruded silicone gasketseals the optical and electrical compartmentfrom external contaminants

• Die-cast aluminum dooris secured via four (4)tamper resistant stainlesssteel allen head fasteners

• Impact resistant, clear flattempered glass sealed todoor with a one-piece silicone gasket

• Available in horizontal orvertical lamp orientation.Optics feature mogul-base lamp holders

• High power factor ballastare heat sunk to housingfor cooler operation andlonger life

• Heavy-duty die-cast aluminum knuckle mountutilizes tooth-lock adjustment mechanismfor solid engagement and ease of aiming.Knuckle fits over standard2 3/8" O.D. pipe tenon



Impact Flood’s cylindrical formblends effortlessly to architecturaland landscape environments. Available in wattages up to 400WPulse Start Metal Halide, MetalHalide and High Pressure Sodium,and up to 70W Compact Fluorescent. Impact Flood offersproperly scaled solutions for anyfloodlighting application.

19 1/2" [495 mm]

10" [254 mm]

22" [358 mm]

MM IMPACT FLOOD

MEDIUM




A R C H I T E C T U R A LF L O O D L U M I N A I R E

NOTES: 1 150W MP is medium-base. 2 350W available in HF distribution only. 3 175, 250 and 400W MH available for non-US markets only. 4 88% efficient EISA Compliant fixtures not available in 347V or Triple-Tap voltages. 5 Compact Fluorescent lamps only, 120-277V with internal fusing. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 6 Add as suffix in the order shown. 7 Order separately, replace XX with color suffix. 8 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPMM-K-HF-400-MT-LL

Lamp Type 1


MH=Metal Halide 2


CF=CompactFluorescent

SeriesMM=Impact Flood

Medium

MountingK=Knuckle

DistributionHF=Horizontal FloodVF=Vertical Flood

LampWattageMP150=150W200=200W250=250W320=320W 2

400=400W MH175=175W 2

250=250W 400=400W HP150=150W250=250W400=400WCF57=57W70=70W

Voltage120V208V240V277V347V 4

480VDT=Dual-TapMT=Multi-TapTT=Triple-Tap 4

E=Electronic 5

Color 6

__=Bronze(Standard)

WH=WhiteBK=BlackAP=Grey

Accessories 7

MM/SMT-XX=Surface MountTenon

MM/ST-XX=Stanchion MountMM/TMT-XX=Twin Mount

Tenon (EPA .35)MM/WMT-XX=Wall Mount

Tenon(EPA .22)

MM/BD-XX=Barn Doors(EPA 2.49)

MM/TV-XX=Top Visor(EPA 1.30)

MM/4V-XX=Four SidedShield (EPA 2.21)

MM/VS=Vandal ShieldMM/WG=Wire Guard

Options 6

Q=Quartz Restrike(Hot Strike Only)

EM=Quartz Restrikewith “Delay Relay”(Quartz lamp strikes at both hot andcold starts)

EM/SC=EmergencySeparate Circuit

LL=Lamp Included(Must Specify SingleWattage with Fluorescent)


PC=Button Type PhotocontrolF1=Single Fuse

(120, 277 or 347V. Specify Voltage)F2=Double Fuse

(208, 240 or 480V. Specify Voltage)

NOTES: Horizontal flood optics, multi-tap ballast and bronze paint are standard for stock products. Options not available with stock products. Refer to standard ordering information. Refer to In-Stock Guide for availability.


SAMPLE NUMBER: MPMM40

Lamp TypeMP=Pulse

StartMetalHalide

SeriesMM=Impact

Flood Medium


Accessories (order separately)MM/TV-BZ=Top VisorMM/4V-BZ=Four Sided ShieldMM/BD-BZ=Barn DoorsMM/WG=Wire Guard

Lamp Type WattagePulse Start Metal Halide (MP) 150, 200, 250, 320, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 150, 250, 400WCompact Fluorescent (CF) 57, 70W


FLO

OD

LIG

HT

ING

COOPER LIGHTING59

T R U N N I O N Y O K E M O U N T D R I L L P A T T E R N

NOTES: 1 Metal Halide available for non-US markets only. 2 Medium-base socket for MP 150W and lower. 3 Products also available in non-us voltages & 50Hz for international markets. 88% efficient EISA MP fixtures not available in 347V and Triple-Tap voltages. 4 5-Tap ballast available in 400W Metal Halide only. 5 Add as suffix in the order shown. 6 Class I Division 2 rating. Not available with NEMA Photocontrol, fusing or Quartz option. Slipfitter only. 7 Specifications and dimensions subject to change without notice.

Options 5

HAZ=Hazardous Location (Class 1 Division 2 rating) 6

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)Q=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike with “Delay Relay”

(Quartz lamp strikes at both hot and cold starts)EM/SC=Emergency Separate Circuit LL=Lamp IncludedPER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol C23=3' of 12-3 Cord, Prewired (Specify Single Voltage)C42=2' of 14-3 Cord, Prewired (Specify Single Voltage)C43=3' of 14-3 Cord, Prewired (Specify Single Voltage)C63=3' of 16-3 Cord, Prewired (Specify Single Voltage)

AccessoriesTYS-XX=Trunnion or Yoke Slipfitter for 2 3/8", 3", or 3 1/2" O.D. TenonWG/WR=Wire GuardVG/WR=Vandal ShieldRAB-XX=Right Angle Pipe Bracket for SlipfitterSAB-XX=Steel Angle Bracket for TrunnionOA/RA1014=Photoelectric Control, 120 Volt NEMA TypeOA/RA1016=Photoelectric Control, 105-285 Volt NEMA TypeOA/RA1027=Photoelectric Control, 480 Volt NEMA TypePB120V=Button Type Photocontrol, Field Installed (120V only)TV/WR-XX=Top Visor

15 3/4"[400mm]

14 7/8"[378mm]

2"[51mm]

6"[152mm]

Slipfitter Mount

Yoke Mount

15"[381mm]

4"[102mm] 7"

[178mm]

13"[330mm]

Trunnion Mount


SAMPLE NUMBER: MPWR-65S-400-MT

Lamp TypeMP=Pulse

Start MetalHalide

MH=Metal Halide


SeriesWR=Warrior

Distribution65=6 x 5

BeamSpread

MountingS=SlipfitterT=TrunnionY=Yoke

Lamp Wattage 2

MP100=100W150=150W200=200W250=250W320=320W350=350W 400=400WMH 1

175=175W250=250W400=400W250/400=250/400W (wired 250W)

HP100=100W150=150W250=250W400=400W

Voltage 3

120V208V240V277V347V 3

480VMT=Multi-TapTT=Triple-Tap 3

5T=5-Tap 4


(See Below)

NOTES: 1 150W available in MP only. Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard orderinginformation to add options and accessories. 320W available in MP only. Refer to In-Stock Guide for availability.


SAMPLE NUMBER: XS15

SeriesX=SlipfitterW=Trunnion

Lamp TypeS=High Pressure SodiumP=Pulse Start Metal Halide

Lamp Wattage15=150W 1

25=250W32=320W 40=400W

For Pole Information Refer to Cooper Lighting Pole Section.

3 3/4" [95mm]

1 7/8"[48mm]

7/8" [22mm]dia. hole

1"[25mm]

9/16" [14mm]dia. hole (2)

D I M E N S I O N S


• Corrosion-resistant captive retaining screws

• Watertight die-cast aluminum housing door is finished in dark bronzepolyester powder coat.Cast ridge for water tightseal against gasketing

• Full circumference, high-temperature foam-in-place siliconegasketing seals out external contaminants

• Mogul-base porcelainsocket, except 150W andbelow has medium-base

• High power factor ballastwith class H insulation.Minimum starting temperature is -40°C (-40° F) for HP and -30°C (-20° F) for MH and MP

• Variable mountings of either 3/16" galvanizedsteel trunnion (shownbelow) or integral die-cast aluminum slipfitter (shown in photo to right). Slipfitterfits 2 3/8" - 3" O.D. tenon.Heavy-duty steel yokeprovides flexibility inmounting and aimingfrom a variety of surfaces

• Class I Div 2 Rated



The Lumark Warrior offers a variety of lamp and mounting options in high pressure sodiumand metal halide, and can be installed, lamped and servicedwith the most basic tools. U.L. listed and labeled for wet locations. CSA certified.

E P A - E f f e c t e d P r o j e c t e d A r e a : 1.3 @ 45°

WR WARRIOR


S L I P F I T T E R - , T R U N N I O N - ,O R Y O K E - M O U N T E D F L O O D L I G H T

Lamp Type WattagePulse Start Metal Halide (MP) 100, 150, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400, 250/400WHigh Pressure Sodium (HP) 100, 150, 250, 400W



FLO

OD

LIG

HT

ING

COOPER LIGHTING 60



• Aerodynamically designed die-cast aluminum housing haslow EPA rating

• Flush, draw-action latchesoffer easy access to lamp compartment withouttools and maintain integrity of seal whenclosed

• Die-cast aluminum doorwith integral cast hingesfor removal without tools

• Heat- and impact-resistant tempered glass.Lens is mounted flush withdoor surface to reducewind drag and preventdirt or moisture from accumulating

• Door gasket is foam-in-place silicone, providingmaximum protection ofinterior components fromthe elements

• Available in three (3) mounting variations. Slipfitter: Die-cast aluminum integral slipfitter mounts on 2 3/8"to 3" O.D. tenon. Yoke:Heavy-duty steel yoke provides flexibility inmounting from a varietyof surfaces. Trunnion:Die-formed steel trunnionis easily adapted to manyareas and allows easy fixture aiming



The Lumark Nighthawk IIIutilizes a soft-cornered aerodynamic design to provide excellent EPA ratings and an aesthetically pleasing appearance. Dark bronzepolyester powder coat finish assures corrosion resistance and long-lastingaesthetics.

Options 4

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)Q=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike with “Delay Relay”


LL=Lamp Included 6

T=Removable Quick-Disconnect Power Tray 5

PER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol

Accessories 7

TYS-XX=Trunnion or Yoke Slipfitter for 2 3/8", 3", or 3 1/2" O.D. Tenon 8

VS/NK=Vandal ShieldWG/NK=Wire GuardVS/NK/1000=Vandal Shield for 1000W UnitsOA/RA1016=Photoelectric Control, 105-285 Volt NEMA TypeOA/RA1201=Photoelectric Control, 347 Volt NEMA TypeOA/RA1027=Photoelectric Control, 480 Volt NEMA TypeOA/RA1028=Field Installed NEMA Twistlock Photocontrol Receptacle

(Order Photocontrol Separately)TV/NK-XX=Top or Bottom VisorSV1/NK-XX=Single Side VisorSV/NK-XX=Double Side VisorOA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol Receptacle

NOTES: 1 175, 250 and 400W MH available for non-US markets only. 2 Products also available in non-US voltages and 50Hz for international markets. Consult factoryfor availability and ordering information. 3 88% efficient EISA MP fixtures not available in 347V and Triple-Tap voltages. 4 Add as suffix in the order shown. 5 Not available in 1000W. 6 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specifiedlamps must be ordered as a separate line item. 7 Order separately, replace XX with color suffix. 8 Not available with slipfitter-mount. 9 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPNK-S76-400-MT-Q

Lamp TypeMP=Pulse

Start Metal Halide

MH=Metal Halide


SeriesNK=Nighthawk III

MountingTypeS=SlipfitterT=TrunnionY=Yoke

Distribution76=7H x 6V

BeamSpread

Lamp WattageMP150=150W250=250W320=320W400=400W750=750W1000=1000W

MH175=175W250=250W400=400W1000=1000W

HP150=150W250=250W400=400W600=600W750=750W1000=1000W

Voltage 2

120V208V240V277V347V 5

480VMT=Multi-Tap wired 277VTT=Triple-Tap wired 347V 6


(See Below)


20 1/2"[521mm] 150-400W HPS & MH,

1000W HPS 9 1/2" [241mm] 1000W MH 10 1/2" [267mm]

18 1/2"[470mm]27 1/2"

[699mm]

20 1/2"[521mm]

18 1/2"[470mm]

22 1/2"[572mm]

20 1/2"[521mm]

18 1/2"[470mm]24"

[610mm]

150-400W HPS & MH, 1000W HPS 9 1/2" [241mm]1000W MH 10 1/2" [267mm]

150-400W HPS & MH, 1000W HPS 9 1/2" [241mm]1000W MH 10 1/2" [267mm]

Slipfitter Mount

Trunnion Mount

Yoke Mount

3 3/4" [95mm]

1 7/8"[48mm]


1"[25mm]

9/16" [14mm]dia. hole (2)

Y O K E - A N D T R U N N I O N - M O U N T D R I L L P A T T E R N

2" [51mm]

1 1/2" [38mm]

5 3/8"[137mm]

3 1/2"[89mm]


NOTES: 1 Multi-tap ballast, 7Hx6V beam spread, bronze finish, and lamp are standard for stock product. 2 250W stock product only available with MP lamp and slipfitter mount. 3 250, 320 and 400W available in MP only. 4 1000W available in MH and HPS only.

Refer to In-Stock Guide for Availability.


SAMPLE NUMBER: MPNKS32

Lamp TypeMP=Pulse Start Metal HalideMH=Metal HalideHP=High Pressure Sodium

SeriesNK=Nighthawk III 1

Mounting TypeS=SlipfitterY=Yoke

Lamp Wattage25=250W 2

32=320W 3

40=400W 1K=1000W 4

AccessoriesTYS=Trunnion or Yoke Slipfitter for

2 3/8", 3", or 3 1/2" O.D. Tenon

Lamp Type WattagePulse Start Metal Halide (MP) 150, 250, 320, 350, 400, 750, 1000WMetal Halide (MH) 175, 250, 400, 750, 1000WHigh Pressure Sodium (HP) 150, 250, 400, 600, 750, 1000W


NKNIGHTHAWK III



S L I P F I T T E R - , T R U N N I O N - ,O R Y O K E - M O U N T E D

F L O O D L I G H T

FLO

OD

LIG

HT

ING

COOPER LIGHTING61

D I M E N S I O N S


• One-piece, hinged asymmetrical reflectorwith kick auxiliary reflector. Reflectors areanodized for premiumperformance and durability. Support rodholds reflector open forhands free relamping

• High temperature siliconerubber door gasket

• Die-cast aluminum doorframe holds glass lensand is finished in bronzepolyester powder coat

• Slipfitter fits 2 3/8" O.D.tenon (Optional Trunnionmount available)

• Optional internallymounted louver bladesare designed to provideexcellent glare control for such applications asairport ramps and taxiways. When ordering250/400W units are supplied with 16 louverblades, 1000W suppliedwith 18 louver blades

• CWA HPF ballast withClass H insulation withoptional CWI. Minimumstarting temperature is-40°C (-40°F) for HP and -30°C (-20°F) for MH andMP




The LP Low-Profile Floodlight utilizes an asymmetrical reflector to produce a highly defined rectangular pattern. A die-cast aluminum door frameforms a solid foundation for theelectrical components and an anodized aluminum reflector.Ideal for low glare applications.

NOTES: 1 Suitable for horizontal burn lamps only. 2 Bronze is standard color (only door and slipfitter). Other finish colors available. Consult your Cooper LightingRepresentative. 3 250 and 400W MH for non-US markets only CWI ballasts available for non-US markets. 4 Products also available in non-US voltages andfrequencies for international markets. 5 88% efficient EISA Compliant fixtures not available in 347V or Triple-Tap voltages. 6 Add as suffix in the ordershown. 7 Vandal shield–1/8" thick polycarbonate external shield on large units (1000W), .187" thick polycarbonate lens in place of standard lens on smallunits (250-400W). 8 Order separately. 9 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPLP-RC-1000-120V


Metal HalideMH=Metal HalideHP=High

Pressure Sodium

Series 1, 2

LP=Low-ProfileDistributionRC=Rectangular

Cutoff

Lamp WattageMP250=250W320=320W350=350W400=400W750=750W1000=1000WMH 3

250=250W400=400W1000=1000WHP250=250W400=400W600=600W750=750W1000=1000W

Ballast Type__=CWAI=CWI 3

Voltage 4

120V208V240V277V347V 5



(See Below)

D I M E N S I O N - I N C H E SEPA Shipping

Lamp (sq. ft.) VolumeSource A B C D Front Side (cu. ft.)250/400W 26 1/2" [673mm] 22 1/8" [562mm] 7 7/8" [200mm] 18" [457mm] 2.72 0.67 4.061000W 38 1/8" [968mm] 28 5/8" [727mm] 11 3/4" [298mm] 22" [559mm] 4.62 1.31 11.06

NOTE: EPA ratings at recommended 30° aiming angle.

B A

A

C

D

CLOSED

OPEN

Options 6

F1=Single Fuse (120, 277 or 277V only)F2=Double Fuse (208, 240 or 480V only)PER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type PhotocontrolVS=Vandal Shield 7

N=Louver

Accessories 8

OA1058=Base for Flat Surface MountOA/RA1016=Photoelectric Control 105V–285V NEMA Type OA/RA1027=Photoelectric Control 480V NEMA Type OA1059=Hood for 250/400W UnitsOA1060=Hood for 1000W Units

For Pole Information Refer to Cooper Lighting Pole Section.E P A - E f f e c t e d P r o j e c t e d A r e a : 2.72 (250/400W) 4.62 (100W)

LP LOW-PROFILEFLOODLIGHT


F L O O D L I G H T

Lamp Type WattagePulse Start Metal Halide (MP) 250, 320, 350, 400, 750, 1000WMetal Halide (MH) 250, 400, 1000WHigh Pressure Sodium (HP) 250, 400, 600, 750, 1000W



FLO

OD

LIG

HT

ING

COOPER LIGHTING 62


For Pole Information Refer to Cooper Lighting Pole Section.E P A - E f f e c t e d P r o j e c t e d A r e a : 2.45


• Rugged aluminum ballasthousing is finished in corrosion-resistant darkbronze polyester powdercoat

• Ballast/capacitor compartment providescooler operation and extended component life.

• Vertical aiming quadrantwith repositioning stopcombines with horizontalaiming protractor to allowpre-aiming while pole ison the ground

• Die-cast socket housinghas silicone gasket tokeep out contaminants

• Computer-designed spun-aluminum reflectorproduces repeatablebeam distributions blades (std.)

• 1/8" tempered, heat- andshock-resistant lenssealed with closed-cellneoprene gasketing protects optics from dustand contaminants and ishinged for easy access



Computer-designed optics and aprecise aiming mechanism makethe Eagle XL the right choice for amateur or professional sports facilities. U.L. listed for wet locations. CSA certified.

NOTES: 1 All lamps are mogul-base. Lamp not included. Pulse Start Metal Halide (MP) and Metal Halide (MH) available in 1000W only. 2 Products also available innon-US voltages and 50Hz for international markets. 3 Multi-Tap ballast is 120/208/240/277V wired 277V. 4 Triple-Tap ballast is 120/277/347V wired 347V. 5 Add as suffix in the order shown. 6 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 7 Specify desired length in unit of feet (Example: C6 for 6' cord). 8 Order separately.9 Specifications and dimensions subject to change without notice.

NOTES: 1 Type VI available in 1000W only.Options not available with stock products. Order accessories as separate items for field installation. Refer to standard ordering information to add optionsand accessories. Refer to In-Stock Guide for availability.

D I M E N S I O N S

Options 5

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)LL=Lamp Included 6

C3=3' Cord with no plug (Must use with FH-1 or FL-1 or SHK) 7

Accessories 8

S/XL=Slipfitter Mount, Field Installed (Fits 2-3/8" O.D. Tenon pipe)VS/XL=Vandal ShieldHD/XL=Heavy-duty ShroudTV/XL=Top VisorS2C2WP=Two-in-line Crossarm for Wood Pole (EPA .9)S3C3WPM=Three-in-line Offset Crossarm for Wood Pole (EPA 3.6)S4C4WP=Four-in-line Crossarm for Wood Pole (EPA 4.5)WB/XL=Wood Crossarm Bolt


SAMPLE NUMBER: HPXL-T3-1000-MT


Metal HalideMH=Metal HalideHP=High

Pressure Sodium

SeriesXL=Eagle XL

DistributionT2=Type IIT3=Type IIIT4=Type IVT5=Type VT6=Type VI

Lamp Wattage 1

1000=1000W1500=1500W

Voltage 2

120V208V240V277V347V480VMT=Multi-Tap Wired 277V 3

TT=Triple-Tap Wired 347V 4


SAMPLE NUMBER: MHXL-3-1000-MT

Lamp TypeMH=Metal

Halide

SeriesXL=Eagle XL

Distribution 1

3=Type III4=Type IV5=Type V6=Type VI


VoltageMT=Multi-Tap

NOTES: 1 Type IV available in 1500W only.Options not available with stock products. Order accessories as separate items for field installation. Refer to standard ordering information to add optionsand accessories. Refer to In-Stock Guide for availability.

S T O C K S A M P L E N U M B E R ( I N C L U D E S R E F L E C T O R A N D D O O R )

SAMPLE NUMBER: MHXL-4-1000-480V

Lamp TypeMH=Metal

Halide

SeriesXL=Eagle XL

Distribution 1

4=Type IV5=Type V


Voltage480V


(See Below)

21"[533mm]

11"[279mm]

4 3/4"[121mm]

2 3/4"[70mm]

9 1/4"[235mm]

11"[279mm]

4"[102mm]

22"[559mm]

XL EAGLE



S P O R T S F L O O D L I G H T I N G

Lamp Type WattagePulse Start Metal Halide (MP) 1000WMetal Halide (MH) 1000W, 1500W


FLO

OD

LIG

HT

ING

COOPER LIGHTING63



• Rugged die-cast aluminumballast housing finished incorrosion resistant whitepolyester powder coat.Transverse mounting withcast-in horizontal aimingprotractor and single boltmounting

• Isolated components forcoolest component operation and extendedcomponent life. Ballast israted to start and operatelamp in ambient temperatures down to -20° C

• Stainless steel mountingarms feature separate vertical aiming pivot boltsand rear re-lamping hingebolts prevent mis-aimingand provide permanentfixed aiming. Aiming degree markers on bothsides of the optical allowfor easy pre-aiming on theground or after installation

• 1/8" tempered, heat- andshock-resistant glass lensis sealed with high temperature silicone gasket to protect opticsfrom dirt and contaminantsand is mounted in hinged stainless steel door framewith stainless steel latches

• Die-cast aluminum socketcastings are sealed with ahigh temperature siliconegasket to keep out contaminants



The ”state-of-the-art” All Star sportsfloodlight features industry leadingcomputer designed horizontal optics with optional internalglare/spill light control, and is theperfect choice for both amateur fieldlighting and professional sports stadiums and arenas. U.L. Listed for wet location. CSA certified.Rated for 55° C indoor ambient temperature environments.

NOTES: 1 All lamps are mogul-base. Lamp not included. Pulse Start Halide (MP) and Metal Halide (MH) available in 1000W only. 2 Products also available in non-USvoltages and 50 Hz for international markets. 3 Multi-Tap ballast 120/208/240/277V wired 277V. 4 Triple-Tap ballast 120/277/347V wired 347V. 5 Add as suffixin the order shown. 6 Wiring pulled for remote 1000W maximum Quartz Flood. 7 1000 & 1500W MH only. 6 Specifications and dimensions subject to changewithout notice.

23"[584mm]

22 7/8"[556mm]

28 1/2" [724mm]

25 3/4"[654mm]

10 1/2" [267mm]

2 3/4"[71mm]

2 3/8"[70mm]

Options 5

F1=Single Fuse (120, 277 or 347V only)F2=Double Fused (208, 240 or 480V only)HD=Heavy-Duty ShroudQ=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike Cold Start Time DelayRQ=Remote Quartz 6

RT=Remote Quartz Cold Start Time Delay 6

HC=LumaWatt Fixture Module 7

C3=3' Cord, Prewired with no plug (Must use with FH-1 or FL-1 or SHK)C6=6' Cord, Prewired (Specify Voltage)U3=3' USL Water Tight Cord & Plug for USL System (Specify Voltage)TV=Top Visor (Black Polyester Powder Coated)


SAMPLE NUMBER: MHAS-MS-1500-480V-U3

Lamp TypeMP=Pulse

StartMetalHalide

MH=MetalHalide

SeriesAS=ALLSTAR

SportsFloodlight

DistributionN=NarrowM=MediumW=Wide

Internal Louvers __=NoneS=Spill LIght

Control Louvers

Lamp Wattage 1

1000=1000W1500=1500W1650=1650W

Voltage 2

120V208V240V277V347V480VMT=Multi-Tap wired 277V 3

TT=Triple Tap wired 347V 4

220/50HZ

Options (See Below)

For Pole Information Refer to Cooper Lighting Pole Section.E P A - E f f e c t e d P r o j e c t e d A r e a : 2.9

AS ALLSTAR

1000-1650WPulse Start Metal HalideMetal Halide

S P O R T S L I G H T I N G

Lamp Type WattagePulse Start Metal Halide (MP) 1000WMetal Halide (MH) 1000, 1500, 1650W


FLO

OD

LIG

HT

ING

OP

TIO

NS

+ A

CC

ES

SO

RIE

S

COOPER LIGHTING 64

COOPER LIGHTING - LUMARKI M P A C T F L O O D A C C E S S O R I E S [ S M A L L + M E D I U M ]

3/4" [20mm] Dia.

5"[127mm]

4 1/4"[108mm] 4" [102mm]

4 1/2"[115mm]

3/4" [20mm] Dia.

6"[152mm]

Dia.

3/4"[20mm]

Dia.

MS/4V + MM/4V 4-Sided Shield

MS/BD + MM/BD Barn Doors

MS/TV + MM/TV Top Visor

MS/WG + MM/WG Wire Guard

MS/VS + MM/VS Vandal Shield

MS/JBJunction Box

MS/SFSlipfitter

(Fits 2 3/8" O.D. Tenon)

MS/WMWall Mount

24" [610mm]

3/4" [20mm]Dia.

6 1/2"[165mm] Sq.

15" [381mm]

5/16" [8mm] Dia.

3/4" [20mm] Dia.

5/16" Dia.[8mm]

2 3/8" [60mm]O.D.

4"[102mm]

6 1/2"[166mm] Sq. 5" [127mm]

Sq. Bolt Pattern

18"[457mm]

4" [102mm]

5/16"[8mm]

Dia.

6" [152mm]Sq. Bolt Pattern

2 3/8"[60mm]

O.D.

MS/TMATwin Mount Arm


MS/WMAWall Mount Arm

MM/SMTSurface Mount Tenon

4"[102mm]

42" [1067mm]

2 3/8" [60mm]O.D.

5"[127mm]

Sq. Bolt Pattern

15"[381mm]

6 1/2"[165mm]

4"[102mm]

2 3/8" [60mm]O.D.

MM/TMTTwin Mount Tenon


MM/WMTWall Mount Tenon

MM/STStanchion Mount Tenon

FLO

OD

LIG

HT

ING

OP

TIO

NS

+ A

CC

ES

SO

RIE

S

COOPER LIGHTING65


SPKLandscape Post

S2C2WP (EPA .9)Two-in-line crossarm

S3C3WP (EPA 3.6)Three-in-line crossarm

S4C4WP (EPA 4.5)Four-in-line crossarm

SAB Steel Angle Bracket

RAB Right Angle Pipe Bracket

(2 3/8" O.D.)

RBCOutlet Box Cover

(1/2" Entry)

OBC

20"[508mm]

45°

1 1/2"[38mm]

15 1/2"[394mm]

3"[76mm]

5 5/8"[143mm]

8 1/2"[216mm]

5 5/8"[143mm]

8"[203mm]

OBCOBC

2 3/8"[60mm]

O.D.

TYSSlipfitter Adapter

(Fits 2 3/8", 3", 3 1/2" O.D. Tenon)

OBC

4 12/16"[122mm]

4" [101mm]

N I G H T H A W K A C C E S S O R I E S

SV1/NKSide Visor

TV/NKTop/Bottom Visor

TV/NKTop/Bottom Visor

VS/NKVandal ShieldVS/NK/1000

Vandal Shield for 1000W Units

SV/NKDouble Side Visor

SV/NK Double Side Visor + TV/NK Top Visor [Shown]

Double Side Visor [SV/NK] + (2) Top/Bottom Visors [TV/NK]

Shown

WG/NKWire Guard

TV/WRTop Visor

WG/WRWire Guard

VG/WRVandal Guard

Each kit contains one visor only

W A R R I O R A C C E S S O R I E S F L O O D L I G H T I N G A C C E S S O R I E S

SV/NKDouble Side Visor

WA

LL M

OU

NT

COOPER LIGHTING 66



• Two-piece die-cast aluminum housing

• Rigid steel mounting attachment fits directly to 4" J-Box or wall with“Hook-N-Lock” mechanism for quick installation

• HID luminaires suppliedwith high power factor ballast with Class H insulation. Minimum starting temperatures are -40°C (-40°F) for HP and -30°C (-22°F) for MP/MH. Compact Fluorescent luminaires feature electronic universal 120-277V high efficient 50/60Hz ballast with -18°C(0°F) minimum starting

• Die-cast door features1/8" heat- and impact-resistant clear temperedglass lens. Hinged doorsecured in place via two(2) captive fasteners

• Durable polyester powdercoat finish. Standardcolor is bronze. Other finish colors available



The IMPACT Wedge full cutoffwall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mountapplications and damp locationsin up mounted applications.

Rugged construction and full cutoff classified optics provide facade and security lighting forlight restricted zones surroundingschools, office complexes, apartments, and recreational facilities.

9"[229mm]

16 1/2" [419mm] 8 1/4" [210mm]

C O M P L I A N T Full Cutoff

D A R K S K Y FCONOTE: In down light applications only.

NOTES: 1 Lamp type not available in all wattages - see wattage table. HID lamps are medium-base. 480V not available in 50W or 70W. 175W MH is available for non-U.S. markets only. 2 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Representative for availabilityand ordering information. 3 PE not available with 480V. 4 Available with CF Option only. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 5 Down lighting position only. 6 (1) 120V Lamp, 100W maximum quartz lamp. Utility power may need to cycle to allow HID lamp to coolin warm climates. Not available with CF Option. Lamp supplied by others. 7 Leads out of the back of the unit for auxillary 120V. 8 Not available with CFlamps. 9 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lamps supplied by others. 10 Not Available with 52, 64, 84 CF wattages. 11 (1) or (2) 12V bi-pin lamp, socket GU5.3 base, 35W maximum. Power supplied by low voltage DC source (supplied by others). Lamps supplied by others. 12 Specify 120 or277V, (-18°C) minimum temperature. 13 Specify 120 or 277V, (0°C) minimum temperature. 14 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MHIP-W-150-MT-LL

Lamp Type 1


MH=Metal Halide 1


CF=Compact Fluorescent

Fixture TypeIP=Impact

Fixture ShapeW=Wedge

Lamp Wattage 1

MP50=50W70=70W100=100W150=150W

MH 1

175=175WHP50=50W70=70W100=100W150=150W

CF26=(1) 26W32=(1) 32W42=(1) 42W52=(2) 26W64=(2) 32W84=(2) 42W

Voltage 2

120V208V240V277V347V480VDT=Dual-TapMT=Multi-Tap wired 277VTT=Triple-Tap wired 347VE= Electronic 120-277V 4

Options(See Below)

NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information to add options.


SAMPLE NUMBER: MPIW15


Metal HalideHP=Metal Halide

FixtureTypeIW=IMPACT

Wedge

LampWattage10=100W15=150W

F1=Single Fuse, Specify Voltage (120, 277 or 347V)F2=Double Fuse, Specify Voltage (208 or 240V) PE=Button Photocontrol (Must Specify Voltage) 3

BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Screw (Door and Mounting Plate)HS=House-side Shield Glass 4

PL=Polycarbonate Lens 4, 5

Q=Quartz Restrike (1) T4 Lamp 6

EM=Emergency Quartz Restrike (1) T4 Lamp With Time Delay Relay 6

EM/SC=Emergency Separate Circuit (1) T4 Lamp 6, 7

QMR=Quartz Restrike (1) MR16 Lamp 8, 9

2QMR=Quartz Restrike (2) MR16 Lamp 8, 9

2QMR/SC=Quartz Restrike (2) MR16 Lamp and (1) EmergencySeparate Circuit MR16 Lamp 7, 8, 9

EMMR=Emergency Quartz Restrike (1) MR16 Lamp With Time Delay Relay 8, 9

2EMMR=Emergency Quartz Restrike (2) MR16 Lamp With Time Delay Relay 8, 9

EM/SC/MR=Emergency Separate Circuit (1) MR16 Lamp 7, 9, 10

2EM/SC/MR=Emergency Separate Circuit (2) MR16 Lamp 7, 9, 10

2EMMR/SC=Emergency Quartz Restrike With Time Delay Relay(1) MR16 and (1) MR16 Emergency Separate CircuitLamp 7, 8, 9

EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (1) MR16 Lamp 7, 11

2EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (2) MR16 Lamp 7, 11

EMI40=Emergency Cold Temperature (UL924 Listed) Power Pack -18°C / 0°F, (1) CF Lamp, Specify Voltage 12

CF-EM=Emergency CF Power Pack (UL924 Listed) (1) CF Lamp. 0°C / 32°F. Specify Voltage 13

Voltage ChartDT=Dual-Tap 120/277V (wired 277V)MT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)E=Electronic (CF only) 120-277V (wired 277V) (50/60 Hz)

Lamp Type Wattage DistributionPulse Start Metal Halide (MP) 50, 70, 100, 150W Type IIMetal Halide (MH) 175W Type IIHigh Pressure Sodium (HP) 50, 70, 100, 150W Type IICompact Fluorescent (CF) (1) 26, (1) 32, (1) 42W, Type II

(2) 26, (2) 32, (2) 42W

Options

IP IMPACTWEDGE




FULL CUTOFFW A L L M O U N T L U M I N A I R E

WA

LL M

OU

NT

COOPER LIGHTING67






• Die-cast door features 1/8"heat- and impact-resistantclear tempered glass lens.Hinged door secured inplace via two (2) captivefasteners

• Durable polyester powdercoat finish. Standard coloris bronze. Other finish colors available



The IMPACT Trapezoid full cutoffwall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mountapplications and damp locationsin up mounted applications.


8 1/2"[210mm]

16 1/2" [419mm] 9" [229mm]



NOTES: 1 Lamp type not available in all wattages - see wattage table. HID lamps are medium-base. 480V not available in 50W or 70W. 175W MH is available for non-U.S. markets only. 2 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Representative for availabilityand ordering information. 3 PE not available with 480V. 4 Not available with CF lamps. 5 Available with CF Option only. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 6 Down lighting position only. 7 (1) 120V Lamp, 100W maximum quartz lamp. Utility power may needto cycle to allow HID lamp to cool in warm climates. Not available with CF Option. Lamp supplied by others. 8 Leads out of the back of the unit for auxillary120V. 9 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lamps supplied by others. 10 Not Available with 52, 64, 84 CF wattages. 11 (1) or (2) 12V bi-pin lamp, socket GU5.3 base, 35W maximum. Power supplied by low voltage DC source (supplied by others). Lamps supplied by others. 12 Specify 120 or277V, (-18°C) minimum temperature. 13 Specify 120 or 277V, (0°C) minimum temperature. 14 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MHIP-T-150-MT-LL

Lamp Type 1


MH=Metal Halide 1




Fixture ShapeT=Trapezoid

Lamp Wattage 1

MP50=50W70=70W100=100W150=150W

MH 1

175=175WHP50=50W70=70W100=100W150=150W

CF26=(1) 26W32=(1) 32W42=(1) 42W52=(2) 26W64=(2) 32W84=(2) 42W

Voltage 2


Options(See Below)

NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information to add options.


SAMPLE NUMBER: MPIT15



FixtureTypeIT=IMPACT

Trapezoid



BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Screw (Door and Mounting Plate)UP10=10% Uplight 4

HS=House-side Shield Glass 5






2QMR=Quartz Restrike (2) MR16 Lamp 4, 9

2QMR/SC=Quartz Restrike (2) MR16 Lamp and (1) EmergencySeparate Circuit MR16 Lamp 4, 8, 9


2EMMR=Emergency Quartz Restrike (2) MR16 Lamp With Time Delay Relay 4, 9


2EM/SC/MR=Emergency Separate Circuit (2) MR16 Lamp 8, 9, 10

2EMMR/SC=Emergency Quartz Restrike With Time Delay Relay(1) MR16 and (1) MR16 Emergency Separate CircuitLamp 4, 8, 9







(2) 26, (2) 32, (2) 42W

Options

IP IMPACTTRAPEZOID




WA

LL M

OU

NT

COOPER LIGHTING 68


• U.L. listed for wet locations. CSA certified.EISA Complaint


• Rigid steel mounting attachment anchored directly to wall over4" J-Box with “Hook-N-Lock” mechanism forquick installation


• Die-cast door features1/8" heat- and impact-resistant clear temperedglass lens. Hinged removable door securedin place via two (2) captive fasteners




The IMPACT Trapezoid full cutoff wall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mountapplications and damp locationsin up mounted applications.

Rugged construction and full cutoff classified optics provide facade and security lighting for light restricted zones surrounding schools, office complexes, apartments, andrecreational facilities.

NOTES: 1 Lamp type not available in all wattages - see wattage table. 175W, 250W and 400W available fornon-U.S. markets only. 2 All HID MP lamps are mogul-base, reduced envelope ED-28 except 200WMP is T15. All HID HP lamps are mogul-base ED-18. 3 Type II 60, 70, 85, 96, 114 or 126W CF only.Type IV - 60, 85 and 120W CF only. In cold temperatures, compact fluorescent lamps produce lowerillumination levels. 4 Products also available in non-US voltages and 50HZ for international markets.88% EISA Compliant MP fixtures not available in 347V and Triple-Tap voltages. 5 Not available withSC option teamed with 320-400W, not available with 480V. 6 Type III only. Not available with CFlamps. 7 Not available with 320 thru 400W. 8 Not available in Type IV 320V through 400W. Not available in Type III with F1, F2 with 320W through 400W. 9 Rated for 40°C for 250W and below fixture. Not available with CF lamps. 10 Each ballast independently wired. Available on 96, 114 or126W CF wattages. 11 Specify CF option 96 or 126W, not available with HS, FR, or VS options. Mustspecify number of lamps. 12 Not available with 320W thru 400W or 114 or 126W CF options. 13 (1)120V Lamp, 150W maximum quartz lamp. Utility power may need to cycle to allow HID lamp to coolin warm climates. 14 Emergency lamps supplied by others. 15 Emergency lamp leads out of theback of the unit to auxillary 120V. 16 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lampssupplied by others. 17 Power supplied by low voltage DC source (supplied by others). (1) or (2) 12V bi-pin socket GU5.3 base lamps, 35W maximum each. 18 Specify 120 or 277V, (-18°C) minimumtemperature, not available with UP10 or CSW option, 70W CF maximum. 19 Specify 120 or 277V, (-18°C) minimum temperature, supports (2) 32W CF lamps, not available with UP10 or CSW option.20 Specify 120 or 277V, (0°C) minimum, not available with UP10 or CSW option, 70W CF maximum.21 Specify 120 or 277V, (0°C) minimum, not available with UP10 or CSW option, supports (2) 32WCF lamps. 22 Not available with VS option. 23 Not available with 320 thru 400W. Not available withwire guard. 24 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPIP-TM-400-4 -MT-LL

Lamp Type 1


MH=Metal Halide 1

HP=High Pressure SodiumCF=Compact Fluorescent


Fixture ShapeTM=Trapezoid

Medium

DistributionHID3=Type III4=Type IVCF2=Type II 3

4=Type IV 3

Lamp Wattage 2

MP150=150W200=200W250=250W320=320W350=350W400=400WMH 1

175=175W250=250W400=400W

HP250=250W400=400WCF 3

60=(1) 60W70=(1) 70W85=(1) 85W96=(3) 32W114=(2) 57W120=(1) 120W126=(3) 42W

Voltage 4, 5

120V208V240V277V347V 4


E= Electronic 120-277V


(See Below)

F1=Single Fuse, Specify Voltage (120, 277, or 347V)F2=Double Fuse, Specify Voltage (208 or 240V)PE=Button Photocontrol (Specify Voltage) 5

BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Hardware (2 Screws)UP10=10% UplightUP30=30% Uplight 6


SC=Surface Conduit Entry Taps (2) 3/4" NPT 8

HAB=High Ambient 40°C Fixture (HID Lamp) 9

CSW=Circuit Switching 10

DIM=CF Dimming Ballast (CF Lamp/Must Specify Number of Lamps) 11

FR=Frosted Glass 12

Q=Quartz Restrike (1) T4 Lamp 13, 14

EM=Emergency Quartz Restrike (1) T4 Lamp with Time Delay Relay 13, 14

EM/SC=Emergency Separate Circuit (1) T4 Lamp 13, 14, 15


2QMR=Quartz Restrike (2) MR16 Lamps 14, 16

2QMR/SC=Quartz Restrike (1) MR16 Lamp and (1) Emergency Separate Circuit MR16 Lamp 14, 15, 16

EMMR=Emergency Quartz Restrike (1) MR16 Lamp with TimeDelay Relay 14, 16

2EMMR=Emergency Quartz Restrike (2) MR16 Lamps with TimeDelay Relay 14, 16


2EM/SC/MR=Emergency Separate Circuit (2) MR16 Lamps 14, 15, 16

2EMMR/SC=Emergency Quartz Restrike with Time Delay Relay (1) MR16 and (1) MR16 Emergency Separate CircuitLamp 14, 15, 16

EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (1)MR16 Lamp 14, 15, 17

2EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (2)MR16 Lamps 14, 15, 17

EMI40=Emergency Cold Temperature (UL924 Listed) Power Pack-18°C / 0°F, (1) CF Lamp, Specify Voltage 18

EMI40-2L=Emergency Cold Temperature (UL924 Listed) PowerPack (2) CF Lamps -18°C / 0 °F. (Specify Voltage) 19

CF-EM=Emergency CF Power Pack (UL924 Listed) (1) CF Lamp. 0°C/ 32°F. Specify Voltage 20

CF-EM/2L=Emergency CF Power Pack (UL924 Listed) (2) CF Lamps,0°C / 32°F. Specify Voltage 21

10"[254mm]

21 1/16" [535mm] 13 3/4" [349mm]

2 9/16"[65mm]

1 5/16" [49mm](2) Optional 3/4" Surface Conduit Taps



WG/ITM=Wire Guard 22

VS/ITM=Vandal Resistant Shield 23


Lamp Type Wattage DistributionPulse Start Metal Halide (MP) 150, 200, 250, 320, 350, 400W Type III, IVMetal Halide (MH) 175, 250, 400W Type III, IVHigh Pressure Sodium (HP) 250, 400W Type III, IVCompact Fluorescent (CF) (1) 60, (1) 70, (1) 85W, Type II, IV

(2) 120, (2) 57, (3) 32, (3) 42W

Options

Accessories

IPTM IMPACT

TRAPEZOIDMEDIUM





NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options notavailable with stock products. Refer to standard order information to add options.

S T O C K S A M P L E N U M B E R( L A M P I N C L U D E D )

SAMPLE NUMBER: MPITM25

Lamp TypeMP=Pulse

Start Metal Halide

Fixture TypeITM=IMPACT

TrapezoidMedium

LampWattage25=250W32=320W40=400W

WA

LL M

OU

NT

COOPER LIGHTING69










The IMPACT Cylinder full cutoffwall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mountapplications and damp locationsin up mounted applications.


7"[178mm]

18" [457mm] 9" [229mm]



IP IMPACTCYLINDER




NOTES: 1 Lamp type not available in all wattages - see wattage table. HID lamps are medium-base. 480V not available in 50W or 70W. 175W MH is available for non-U.S. markets only. 2 Products also available in non-US voltages and 50Hz for international markets. Consult your Cooper Representative for availabilityand ordering information. 3 PE not available with 480V. 4 Not available with CF lamps. 5 Not available with dual CF lamps. 6 Available with CF Option only.In cold temperatures, compact fluorescent lamps produce lower illumination levels. 7 Down lighting position only. 8 (1) 120V Lamp, 100W maximum quartzlamp. Utility power may need to cycle to allow HID lamp to cool in warm climates. Not available with CF Option. Lamp supplied by others. 9 Leads out of theback of the unit for auxillary 120V. 10 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lamps supplied by others. 11 Not Available with 52, 64, 84 CFwattages. 12 (1) or (2) 12V bi-pin lamp, socket GU5.3 base, 35W maximum. Power supplied by low voltage DC source (supplied by others). Lamps suppliedby others. 13 Specify 120 or 277V, (-18°C) minimum temperature. 14 Specify 120 or 277V, (0°C) minimum temperature. 15 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MHIP-C-150-MT-LL

Lamp Type 1


MH=Metal Halide 1




Fixture ShapeC=Cylinder

Lamp Wattage 1

MP50=50W70=70W100=100W150=150W

MH 1

175=175WHP50=50W70=70W100=100W150=150W

CF26=(1) 26W32=(1) 32W42=(1) 42W52=(2) 26W64=(2) 32W84=(2) 42W

Voltage 2


Options(See Below)

NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information to addoptions.


SAMPLE NUMBER: MPIC15



FixtureTypeIC=IMPACT

Cylinder



BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Screw (Door and Mounting Plate)UP10=10% Uplight 4

UP50=50% Uplight 5















(2) 26, (2) 32, (2) 42W

Options

WA

LL M

OU

NT

COOPER LIGHTING 70




• Rigid steel mounting attachment anchored directly to wall over4" J-Box with “Hook-N-Lock” mechanism forquick installation


• Die-cast door features1/8" heat- and impact-resistant clear temperedglass lens. Hinged removable door securedin place via two (2) captive fasteners




The IMPACT Cylinder full cutoffwall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mountapplications and damp locationsin up mounted applications.


13 5/8" [346mm]

27 3/16" [691mm] 13 9/16" [344mm]

2 3/4"[71mm]

3 3/16" [82mm](2) Optional 3/4" Surface Conduit Taps

IPCM IMPACT

CYLINDERMEDIUM





NOTES: 1 Lamp type not available in all wattages - see wattage table. 175W, 250W and 400W available for non-U.S. markets only. 2 All HID MH lamps are mogul-base, reduced envelope ED-28 except 200W MP is T15. All HID HP lamps are mogul-base ED-18. 3 Type II 60, 70, 85, 96, 114 or 126W CF only. Type IV - 60, 85and 120W CF only. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 4 Products also available in non-US voltages and50HZ for international markets. 88% EISA Compliant MP fixtures not available in 347V and Triple-Tap voltages. 5 Not available with SC option teamed with320-400W, not available with 480V. 6 Type III only. Not available with CF lamps. 7 Not available with 320 thru 400W. 8 Not available in Type IV 320V through400W. Not available in Type III with F1, F2 with 320W through 400W. 9 Rated for 40°C for 250W and below fixture. Not available with CF lamps. 10 Each ballast independently wired. Available on 96, 114 or 126W CF wattages. 11 Specify CF option 96 or 126W, not available with HS, FR, or VS options. Mustspecify number of lamps. 12 Not available with 320W thru 400W or 114 or 126W CF options. 13 (1) 120V Lamp, 150W maximum quartz lamp. Utility powermay need to cycle to allow HID lamp to cool in warm climates. 14 Emergency lamps supplied by others. 15 Emergency lamp leads out of the back of the unitto auxillary 120V. 16 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lamps supplied by others. 17 Power supplied by low voltage DC source (supplied by others). (1) or (2) 12V bi-pin socket GU5.3 base lamps, 35W maximum each. 18 Specify 120 or 277V, (-18°C) minimum temperature, not available with UP10 or CSW option, 70W CF maximum. 19 Specify 120 or 277V, (-18°C) minimum temperature, supports (2) 32W CF lamps, not availablewith UP10 or CSW option. 20 Specify 120 or 277V, (0°C) minimum, not available with UP10 or CSW option, 70W CF maximum. 21 Specify 120 or 277V, (0°C)minimum, not available with UP10 or CSW option, supports (2) 32W CF lamps. 22 Not available with VS option. 23 Not available with 320 thru 400W. Notavailable with wire guard. 24 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPIP-CM-400-4 -MT-LL

Lamp Type 1


MH=Metal Halide 1

HP=High Pressure SodiumCF=Compact Fluorescent


Fixture ShapeCM=Cylinder

Medium

DistributionHID3=Type III4=Type IVCF2=Type II 3

4=Type IV 3

Lamp Wattage 2

MP150=150W200=200W250=250W320=320W350=350W400=400WMH 1

175=175W250=250W400=400W

HP250=250W400=400WCF 3

60=(1) 60W70=(1) 70W85=(1) 85W96=(3) 32W114=(2) 57W120=(1) 120W126=(3) 42W

Voltage 4, 5

120V208V240V277V347V 4


E= Electronic 120-277V


(See Below)

F1=Single Fuse, Specify Voltage (120, 277, or 347V)F2=Double Fuse, Specify Voltage (208 or 240V)PE=Button Photocontrol (Specify Voltage) 5

BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Hardware (2 Screws)UP10=10% UplightUP30=30% Uplight 6


SC=Surface Conduit Entry Taps (2) 3/4" NPT 8

HAB=High Ambient 40°C Fixture (HID Lamp) 9

CSW=Circuit Switching 10

DIM=CF Dimming Ballast (CF Lamp/Must Specify Number of Lamps) 11

FR=Frosted Glass 12

Q=Quartz Restrike (1) T4 Lamp 13, 14

EM=Emergency Quartz Restrike (1) T4 Lamp with Time Delay Relay 13, 14

EM/SC=Emergency Separate Circuit (1) T4 Lamp 13, 14, 15


2QMR=Quartz Restrike (2) MR16 Lamps 14, 16

2QMR/SC=Quartz Restrike (1) MR16 Lamp and (1) Emergency Separate Circuit MR16 Lamp 14, 15, 16

EMMR=Emergency Quartz Restrike (1) MR16 Lamp with TimeDelay Relay 14, 16

2EMMR=Emergency Quartz Restrike (2) MR16 Lamps with TimeDelay Relay 14, 16


2EM/SC/MR=Emergency Separate Circuit (2) MR16 Lamps 14, 15, 16

2EMMR/SC=Emergency Quartz Restrike with Time Delay Relay (1) MR16 and (1) MR16 Emergency Separate CircuitLamp 14, 15, 16

EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (1)MR16 Lamp 14, 15, 17

2EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (2)MR16 Lamps 14, 15, 17

EMI40=Emergency Cold Temperature (UL924 Listed) Power Pack-18°C / 0°F, (1) CF Lamp, Specify Voltage 18

EMI40-2L=Emergency Cold Temperature (UL924 Listed) PowerPack (2) CF Lamps -18°C / 0 °F. (Specify Voltage) 19

CF-EM=Emergency CF Power Pack (UL924 Listed) (1) CF Lamp. 0°C/ 32°F. Specify Voltage 20

CF-EM/2L=Emergency CF Power Pack (UL924 Listed) (2) CF Lamps,0°C / 32°F. Specify Voltage 21



WG/ICM=Wire Guard 22

VS/ICM=Vandal Resistant Shield 23


Lamp Type Wattage DistributionPulse Start Metal Halide (MP) 150, 200, 250, 320, 350, 400W Type III, IVMetal Halide (MH) 175, 250, 400W Type III, IVHigh Pressure Sodium (HP) 250, 400W Type III, IVCompact Fluorescent (CF) (1) 60, (1) 70, (1) 85W, Type II, IV

(2) 120, (2) 57, (3) 32, (3) 42W

Options

Accessories

WA

LL M

OU

NT

COOPER LIGHTING71









NOTES: 1 Lamp type not available in all wattages - see wattage table. HID lamps are medium-base. 480V not available in 50W or 70W. 175W MH is available for non-U.S. markets only. 2 Products also available in non-US voltages and 50HZ for international markets. Consult your Cooper Representative for availabilityand ordering information. 3 PE not available with 480V. 4 Available with CF Option only. In cold temperatures, compact fluorescent lamps produce lower illumination levels. 5 Down lighting position only. 6 (1) 120V Lamp, 100W maximum quartz lamp. Utility power may need to cycle to allow HID lamp to coolin warm climates. Not available with CF Option. Lamp supplied by others. 7 Leads out of the back of the unit for auxillary 120V. 8 Not available with CFlamps. 9 (1) or (2) 120V Lamps. GU10 base, 50W maximum each. Lamps supplied by others. 10 Not Available with 52, 64, 84 CF wattages. 11 (1) or (2) 12V bi-pin lamp, socket GU5.3 base, 35W maximum. Power supplied by low voltage DC source (supplied by others). Lamps supplied by others. 12 Specify 120 or 277V, (-18°C) minimum temperature. 13 Specify 120 or 277V, (0°C) minimum temperature. 14 Specifications and dimensions subject to change withoutnotice.


The IMPACT Quarter Sphere full cutoff wall luminaire makes an ideal complement to site design. U.L. Listed and CSA Certified for wet locations in down mount applications anddamp locations in up mounted applications.



SAMPLE NUMBER: MHIP-S-150-MT-LL


Metal HalideMH=Metal HalideHP=High Pressure

SodiumCF=Compact Fluorescent


Fixture ShapeS=Quarter Sphere

Lamp Wattage 1

MP50=50W70=70W100=100W150=150W

MH175=175W 1

HP50=50W70=70W100=100W150=150W

CF26=(1) 26W32=(1) 32W42=(1) 42W52=(2) 26W64=(2) 32W84=(2) 42W

Voltage 2

120V208V240V277V347V480VDT=Dual-TapMT=Multi-Tap wired 277VTT=Triple-Tap wired 347V 4

E= Electronic 120-277V 10

Options(See Below)

NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Refer to standard order information to addoptions.


SAMPLE NUMBER: MPIS15



FixtureTypeIS=IMPACT

Quarter Sphere

LampWattage 1

10=100W15=150W

F1=Single Fuse, Specify Voltage (120, 277 or 347V)F2=Double Fuse, Specify Voltage (208 or 240V) PE=Button Photocontrol (Must Specify Voltage)BK=BlackWH=WhiteAP=GreyGM=Graphite MetallicDP=Dark PlatinumLL=Lamp Included (Must Specify Wattage on CF)TR=Tamper Resistant Screw (Door and Mounting Plate)HS=House-side Shield GlassPL=Polycarbonate Lens Q=Quartz Restrike (1) T4 LampEM=Emergency Quartz Restrike (1) T4 Lamp With

Time Delay Relay

EM/SC=Emergency Separate Circuit (1) T4 LampQMR=Quartz Restrike (1) MR16 LampEMMR=Emergency Quartz Restrike (1) MR16 Lamp With

Time Delay RelayEM/SC/MR=Emergency Separate Circuit (1) MR16 Lamp2EM/SC/MR=Emergency Separate Circuit (2) MR16 Lamp2EMMR=Emergency Quartz Restrike (1) MR16 Lamp With

Time Delay Relay and (1) MR16 Emergency Separate Circuit Lamp

EM/SC/12V=Emergency Separate Circuit 12V Low Voltage (1) MR16 Lamp

EMI40=Emergency Cold Temperature (UL924 Listed) Power Pack -18°C / 0°F, (1) CF Lamp, Specify Voltage

CF-EM=Emergency CF Power Pack (UL924 Listed) (1) CF Lamp. 0°C / 32°F. Specify Voltage

18" [457mm] 9" [229mm]

9"[229mm]





(2) 26, (2) 32, (2) 42W

IP IMPACTQUARTERSPHERE




Options 12

WA

LL M

OU

NT

COOPER LIGHTING 72



• Captive corrosion resistant, single pointmounting screw

• Die-cast aluminum housing is finished indark bronze polyesterpowder coat

• Impact resistant borosilicate prismaticglass or polycarbonate refractor with aluminumreflector that providesmaximum photometricperformance and beamefficiency

• High-temperature siliconegasketing seals out external contaminants

• Mogul-base porcelainsocket, except 150W andbelow has medium-base

• Normal or High power factor ballast with class Hinsulation. Minimum starting temperature is -40°C (-40°F) for HP and-30° C (-20°F) for MH andMP

• Door assembly is hingedat bottom for ease ofmaintenance

• 3/4" threaded entry on topfor surface conduit entryor field installation ofphotocontrol

• Approximate net weight:32-42 lbs. (15-19 kgs.)

WL WAL-PAK

5 0 - 4 0 0 WH i g h P r e s s u r e S o d i u m

P u l s e S t a r t M e t a l H a l i d eM e t a l H a l i d e

W A L L M O U N T

L U M I N A I R E


The Lumark Wal-Pak provides a durable and efficient exteriorlight source for any application requiring maximum performanceand minimum maintenance. The rugged, die-cast aluminumhousing, stainless steel hardwareand gasket sealed optics compartment combine to makethe Wal-Pak virtually impenetrableto contaminants.

9 5/8"[244mm]

16" [406mm]

50-100W HP, 50-200W MP, 175-250W MH 10 1/2" [267mm]

250-400W HP, 320-400W MP, 400W MH12 1/16" [306mm]

NOTES: 1 175W, 250W and 400 MH available for non-US markets only. 2 150W maximum in HP and MP and 175W in MH. 3 Consult IES Photometric files for lamp information. 4 Products also available in non-US voltages and 50HZ for international markets. 5 88% Efficient EISA MP fixtures not available in 347V andTriple-tap voltages. 6 5-Tap ballast available in 400W MH only. 7 Add as suffix in the order shown. 8 Lamp is shipped separate from luminaire. Lamp isCooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 9 Order separately. 10 Wire guard, visor and shields can not be used together on the same unit. 11 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPWL-250-MT-LL

Lamp TypeMP=Pulse

Start Metal Halide

MH=Metal Halide 1


SeriesWL=Wal-Pak/

Borosilicate Glass Lens/HPF

PL=Wal-Pak/ PolycarbonateLens/HPF 2

WE=Wal-Pak/ Borosilicate Glass Lens/NPF

Lamp Wattage 3

MP50=50W70=70W100=100W150=150W200=200W250=250W320=320W350=350W400=400W

MH 1

175=175W250=250W400=400WHP50=50W70=70W100=100W150=150W250=250W400=400W

Voltage 4

120V208V240V277V347V 5


5T=5-Tap 6


(See Below)

NOTES: 1 320W available in MP only. 100W available in HP only. 2 Shipped with multi-tap ballast, wired 277V. Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add options and accessories. Refer to in Stock Guide for availability.


SAMPLE NUMBER: PS10

SeriesP=Wal-Pak

Lamp TypeS=High Pressure

SodiumP=Pulse Start

Metal Halide

Lamp Wattage 1

10=100W15=150W25=250W32=320W40=400W

Options 7

F1=Single Fuse (120, 277 or 347V only)F2=Double Fuse (208, 240 or 480V only)TR=Tamper-resistant ScrewsQ=Quartz Restrike (Hot Strike Only)EM=Quartz Restrike with “Delay Relay”

(Quartz lamp strikes at both hot and cold start)EM/SC=Emergency Separate CircuitLL=Lamp Included 8

PE=Internal Photocontrol (Specify Voltage)PC=Button Type Photocontrol

Accessories 9

WG/WL=Wire Guard 10

VS/WL-XX=Visor Cutoff Shield 10

FC/WL=Full Cutoff ShieldFSC/WL=Semi Cutoff ShieldWLR=Replacement Glass LensPLL=Replacement Polycarbonate Lens (150W maximum)PE-347V=Field-installed Photocontrol, 347VPE-480V=Field-installed Photocontrol, 480VPE/MT=Field-installed PhotocontrolTRSD-1/4-20=Tamper-resistant ScrewdriverPCS=Polycarbonate Vandal Shield 12

TWC=Thru-way Conduit


Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 50, 70, 100, 150, 250, 400W

WA

LL M

OU

NT

COOPER LIGHTING73


Energy-saving long-lifeHID lamps within a sealed andgasketed optics compartment reduce maintenance to a minimum. A polished-aluminumspecular reflector system promotes maxi mum luminaireperformance.


• One-piece, durable die-cast aluminum housing in a pleasing soft-corner design

• Dark bronze polyesterpowder coat (standard)finish is both weather- and abrasion-resistant

• Compact ballast core andcoil assembly

• Pulse-rated medium-baseporcelain lamp socket

• Specular polished aluminum reflectors provide sharp cutoff and minimum glare with maximum spacingbetween luminaires

• Standard and tamper-proof lens screws includedwith each fixture

• Closed-cell gas-filledhigh-temperature siliconegasketing


NOTES: 1 100W MP maximum. 2 All lamps are medium-base. 3 Not available in 100W MP. 4 High Power Factor ballast is required on all MP products. 5 Products alsoavailable in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 6 Add as suffix in the order shown.7 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as aseparate line item. 8 Mon-2 F1 single fuse available in 120V only. 9 Order separately. 10 Specifications and dimensions subject to change without notice.

M O U N T I N G D E T A I L S


SAMPLE NUMBER: HPMN-70-120V-LL


Metal Halide 1


SeriesMN=Mon-2

Lamp Wattage 2

MP50=50W70=70W100=100W150=150WHP35=35W50=50W70=70W100=100W150=150W

Voltage 5

120VOptions 6

LL=Lamp Included 7

F1=Single Fuse(120, 277 or 347V only) 8


PC=Button Type Photocontrol

Accessories 9

WA1XX=277V Adapter (Specify Color. Bronze is Standard)

WA1347XX=347V Adapter (Specify Color.Bronze is Standard)

WA2=Forward Throw ReflectorWA3XX=Pole Mount Adapter (Specify

Color. Bronze is Standard)WA4XX=Glare Shield (Specify Color.

Bronze is Standard)SD2925PK=Screwdriver for Tamper-

Resistant Screws

10 1/2"[267mm]

10 1/2" [267mm] 5 1/2" [140mm]

2 3/4"[70mm]

5"[129mm]

6 13/16"[173mm]

BallastH=High

Power Factor 3, 4

__=NormalPower Factor

C O M P L I A N T Cutoff

D A R K S K Y COMN MON-2

35-150WHigh Pressure SodiumPulse Start Metal Halide

CUTOFF W A L L M O U N TL U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150WHigh Pressure Sodium (HP) 35, 50, 70, 100, 150W

NOTES: 1 Options not available with stock products. Order accessories as separate items for field installation. Refer to standard ordering information to add optionsand accessories. Refer to In-Stock Guide for availability. 3 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: HPMN70-120V-LL

Series/Lamp TypeHPMN=High

PressureSodium


Voltage120V

OptionLL=Lamp Included

WA

LL M

OU

NT

COOPER LIGHTING 74



NOTES: 1 All lamps are mogul-base except 150W MP and lower are medium-base. Lamp included. 2 175 and 250W MH available to non-US markets only. 3 Polycarbonate lens available from 70-250W HP, 70-150W MP and 175W MH. 4 Consult factory for availability. 5 Products also available in non-US voltagesand 50Hz for international markets. 6 88% efficient EISA compliant fixtures not available in 347V or Triple-tap voltages. 7 5-Tap available in 400W MH only. 8 Add as suffix in the order shown. 9 250W maximum MP or MH. 10 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 11 Order separately. 12 Specifications and dimensions subject tochange without notice.


SAMPLE NUMBER: MPM4-GL-250-MT-LL


Metal HalideMH=Metal Halide 1, 2


SeriesM4=Mon-4

Lens TypeP=Polycarbonate 3

GL=BorosilicateGlass

LampWattage 2

MP70=70W100=100W150=150W200=200W250=250W320=320W 4

350=350W 4

400=400W 4

MH 2

175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 5

120V208V240V277V347V 6

480VMT=Multi-Tap


wired 347V 6

5T=5-Tap 7

Options 8

F1=Single Fuse(120, 277 or 347V only) 9

F2=Double Fuse(208, 240 or 480V only) 9

LL=Lamp Included 10

Q=Quartz Restrike (Cold Start) 9EM=Quartz Restrike with “Delay Relay”

(Quartz lamp strikes at both hot andcold starts) 9

QLL=Quartz Lamp Included 9.10

PE=Internal Photocontrol (Specify Voltage) 9

Accessories 11

SD2925PK=Screwdriver forTamper-resistantScrews

2 3/4"[70mm]

5"[129mm]

6 13/16"[173mm]


• One-piece, heavy-duty,die-cast aluminum housing is finished in darkbronze polyester powdercoat

• Normal or high power factor compact coil andcore ballast with class Hinsulation

• Anodized aluminum reflector is designed foroptimum light control andsharp cutoff (adjustablefrom 70° to 86°)

• Mogul-base porcelain enclosed screw-shell socket, except 150W MPand lower which is medium-base

• Closed-cell high-temperature silicone gasketing seals out external contaminants

• Lens lowers on spring-loaded retainingwires for quick access to internal componentsduring relamping and maintenance



The Lumark MON-4 features a injection-molded polycarbonatehousing / lens and a die-cast aluminum back plate for ruggeddurability.

12"[305mm]

6 1/4"[159mm]

16 1/2" [419mm]

9 1/2" [241mm]


D A R K S K Y CO

M4 MON-4



C U T O F F W A L L M O U N TL U M I N A I R E



WA

LL M

OU

NT

COOPER LIGHTING75


The Lumark WAL-LITE features a injection-molded polycarbonatehousing / lens and a die-cast aluminum back plate for ruggeddurability.


• Die-cast aluminum backplate

• Injection-molded polycarbonate housing.Standard color bronze. Optional white finish available

• Aluminum reflector andprismatic refractor directslight down and out, reducing glare and wasted light

• HID: HP up to 70W, lampincluded. CF: 42W, lampincluded with stock models

• HID: 4Kv medium 3PSEsocket. CF: Gx24q-4 (4-pin)

• Housing is sealed and gasketed

• 1/2" NPS entry point for direct mount applicationswhere internal wiring isdesired

• Can be mounted to any vertical surface

• Approximate net weight: 4.6-7 lbs. (2.04-3 kgs.)

NOTES: 1 HP 120V only. CF 120-277V electronic ballast. 2 In cold temperatures, compact fluorescent lamps produce lower illumination levels. 3 Add as suffix in theorder shown. 4 Not available in 35W HP and 42W CF. 5 Products also available in non-US voltages for international markets. 6 Specifications and dimensionssubject to change without notice.


SAMPLE NUMBER: HPWM70

Lamp TypeHP=High

PressureSodium


Series 1

WM=Wal-LiteLamp WattageHP35=35W50=50W70=70WCF42=42W 2

Options 3

W=White Polycarbonate Housing 4

P=Button Type Photocontrol (120V Only)

NOTES: 1 42W available in CF only. 2 35, 50, 70W fixtures are 120V. 42W CF without option without photocontrol option is 120-277V. 3 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: HPWM70

Lamp TypeHP=High

PressureSodium


SeriesWM=Wal-Lite

Lamp Wattage 1, 2

HP35=35W50=50W70=70WCF42=42W

OptionsP=Button Type Photocontrol (120V Only)

11"[280mm]

6 3/4" [172mm] 5 3/8" [136mm]

M O U N T I N G D E T A I L

10 5/8"[270mm]

7/8"Dia.

[22mm]

3 1/2"[89mm]

6" [153mm]

WM WAL-LITE


42WCompact Fluorescent

COMPACT W A L L M O U N TL U M I N A I R E

Lamp Type WattageHigh Pressure Sodium (HP) 35, 50, 70WCompact Fluorescent (CF) 42W

WA

LL M

OU

NT

COOPER LIGHTING 76



• Die-cast aluminum backplate

• Die-cast aluminum housing finished inbronze polyester powder coat

• Formed aluminum reflector and prismaticborosilicate glass refractor

• 4KV pulse-rated medium-base porcelain socket

• Housing is sealed andgasketed

• 1/2" NPS entry point fordirect mount applicationswhere internal wiring isdesired

• Flush-mount to verticalsurface via die-cast aluminum back plate over recessed J-box or direct to wall and run supply wires through bottom 1/2" NPS entry

• Approximate net weight:12 lbs. (5.4 kgs.)


The Lumark Wal-Lite Glass features a clear prismatic impact-resistant borosilicate glass lensand a die-cast aluminum backplate for rugged durability.

Wal-Lite Glass can be mounted toany vertical surface, and deliversexcellent beam control for areassuch as entrance/eaves, corridors,parking garages, pathways, recreational, retail, security, transportation and warehouse applications.

NOTES: 1 All lamps are medium-base. Lamp is included. 2 Order separately. 3 Products also available in non-US voltages and frequencies for international markets. 4 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPWM10G

Lamp Type 1


SeriesWM=Wal-Lite


Lens TypeG=Glass

Accessories 2, 3

PB120V=Button Type Photocontrol Field Installed (120V only)PB-208/240V=Button Type Photocontrol Field Installed

(208/240V only)PB-277V=Button Type Photocontrol Field Installed (277V only)PE/MT=Field Installed Photocontrol

12"[305mm]

7 5/16" [186mm]

1/2" [13mm]NPS Conduit Hub

5 7/16" [138mm]


11 3/4"[299mm]

3/4"Dia.

[20mm]

4"[102mm]

7 1/8" [181mm]

WM WAL-LITE

GLASS

50-100WPulse Start Metal Halide

C O M P A C T G L A S SW A L L M O U N T

L U M I N A I R E

WA

LL M

OU

NT

COOPER LIGHTING77


• Die-cast aluminum basehousing is U.L. listed forwet locations and CSA certified

• One-piece polycarbonatefront cover with choice ofprismatic or clear lens area

• Specially formulated finish on inside of unit for maximum weather resistance

• Formed, specular anodized aluminum reflector

• Cast-in gasket-retainingchannel positively locatesdoor gasket

• Molded-in latch for toolless entry


NOTES: 1 175W MH available in non-US markets only. 2 Standard lens is prismatic polycarbonate. To specify clear polycarbonate change “WP” in catalog number to“WC”. 3 Uses S-55 (55 Volt) lamp only. 4 Uses coated lamp. 5 High Power Factor ballast is required on all MP and MH products. 6 Products also available innon-US voltages and 50Hz for international markets. 7 Add as suffix in the order shown. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 9 Order separately. 10 Specifications and dimensions subject to change without notice.

D I M E N S I O N S



The Lumark WAL-Eye blendsdurable polycarbonate construction and efficient illumination with an exciting design to deliver lasting performance in virtually any architectural setting.


SAMPLE NUMBER: MPWP-150H-MT-Q


Metal HalideMH=Metal Halide 1


Series 2

WP=WAL-Eyew/ Prismatic Polycarbonate

WC=WAL-Eye w/ ClearPolycarbonate

Lamp WattageMP70=70W100=100W150=150W 3

MH 1, 4

175=175W 4

HP70=70W100=100W150=150W 3

BallastH=High

Power Factor 5


Voltage 6



wired 347V

Options 7



TR=Tamper-Resistant ScrewsQ=Quartz Restrike

(Hot Restrike Only)LL=Lamp Included 8

R=Omit Hinge Pins and include Vandal-Proof Screws



Accessories 9SPA=Square Pole AdapterSCK Surf Cond Kit=Surface

Conduit Kit

16 1/8"[410mm]

15 3/4" [400mm] 9 1/2" [241mm]

5 9/16"[142mm]

7 3/16"[183mm]

2 7/16" [62mm]

4 7/8"[124mm]

10" [254mm]

WP WAL-EYE


W A L L M O U N TL U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 70, 100, 150W


NOTES: Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Order accessories as separate itemfor field installation. Refer to standard ordering information to add options and accessories.


SAMPLE NUMBER: MPWP-150H-MT



Sodium

SeriesWP=Wal-Eye

Lamp Wattage150H=150W

VoltageMT=Multi-Tap

WA

LL M

OU

NT

COOPER LIGHTING 78



• Die-cast aluminum housing finished in architectural dark bronzepolyester powder coat

• Precision aluminum reflector/ visor system directs light down and out, eliminating glare and wasted light

• Optical system is sealedwith foam-in-placesilicone gasketing

• Can be mounted to anyvertical surface. 1/2"knockouts on side of housing accommodatesurface-mounted conduit,or back plate can bemounted to 4" octagonalJ-box

• Prismatic borosilicateglass refractor providesexcellent beam distribution without lens yellowing



The Lumark Glass-Pak is constructed of premium die-cast aluminum and features aborosilicate glass lens.

NOTES: 1 All HID lamps are medium-base. 175W MH is available for non-US markets only. 2 35W is HP only, 120V only. 3 480V not available in 35 or 50W. 4 High Power Factor ballast required on all MP and MH products. 5 Products also available in non-US voltages and 50Hz for international markets. Consultfactory for availability and ordering. 6 Add as suffix in the order shown. 7 Lamp is shipped separate from luminaire. Lamp is Cooper designated productbased on luminaire requirements. Specified lamps must be ordered as a separate line item. 8 Order separately. 9 Specifications and dimensions subject tochange without notice.



SAMPLE NUMBER: MPGP-150H-MT-LL

Lamp TypeMP=Pulse

Start Metal Halide

MH=Metal Halide 1


SeriesGP=Glass-Pak

LampWattage 1

MP50=50W70=70W100=100W150=150WMH175=175W 1

HP35=35W 3

50=50W 3

70=70W100=100W150=150W

Ballast 4

H=High Power Factor

__=Normal Power Factor

Voltage 5

120V208V240V277V347V480V 3

DT=Dual-TapMT=Multi-Tap


wired 347V

Options 6

LL=Lamp Included 7

TR=Tamper Resistant Screws

F1=Single Fuse (120, 277 or 347V only)

F2=Double Fused (208, 240 or 480V only)



Accessories 8

UB-U Universal BKT=Universal Mounting Bracket

WG/GP-GS=Wire GuardPE-480V=Field Installed Photocontrol,

480VPE-347V=Field Installed Photocontrol,

347VPE/MT=Field Installed Photocontrol TRSD-8/32=Tamper-Resistant

Screwdriver

6 3/4"[171mm]

10"[254mm]

7"[178mm]

2 1/2"square[64mm]

6 1/4"[159mm]

7/8" diameter[22mm]9 3/16"

[233mm]

GP GLASS-PAK




Lamp Type WattagePulse Start Metal Halide (MP) 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 70, 100, 150W


NOTES: 1 Dual-Tap available on 70W. Standard multi-tap and bronze. Refer to In-Stock Guide for availability. Options not available with stock products. Order accessories as separate itemfor field installation. Refer to standard ordering information to add options and accessories.


SAMPLE NUMBER: MPGP-70H-DT-LL


Metal Halide

SeriesGP=Glass Pak

Lamp Wattage70H=70W100H=100W150H=150W

VoltageDT=Dual-Tap 1

MT=Multi-Tap

OptionsLL=Lamp Included

WA

LL M

OU

NT

COOPER LIGHTING79




• Prismatic borosilicateglass refractor and aluminum reflector provide excellent beamdistribution without lensyellowing

• Foam-in-place door gasketing seals out external contaminants

• 1/2" K.O.s inside for surface mounted conduitand drill spots in back formounting to 4" octagonalJ-box



The Lumark Super Smokey is constructed of premiumdie-cast aluminum and features a borosilicate glass lens. Thehousing forms a solid foundationfor the electrical components andan anodized aluminum reflector.


NOTES: 1 All lamps are medium-base. 2 480V not available in 35 or 50W. 3 35W is HP, 120V only. 4 175W MH available in non-US markets only. 175W available in120/277V. 5 Ballast for 120V units are Normal Power Factor Reactor type. High Power Factor ballast is required on all MP and MH products. 6 Products alsoavailable in non-US voltages and 50Hz for international markets. 7 Add as suffix in the order shown. 8 Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 9 Single voltage only. Not available in 175W MH. 10 Order separately. 11 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPGS-150H-120V-LL

Lamp TypeMP=Pulse

StartMetal Halide

MH=Metal Halide

HP=HighPressureSodium

SeriesGS=Super

Smokey

LampWattage 1MP50=50W 2

70=70W100=100W150=150WMH175=175W 4

HP35=35W 2, 3

50=50W 2

70=70W

Ballast 5

H=HighPower Factor


Voltage 6

120V120/277V 4

208V240V277V347V480VDT=Dual-TapMT=Multi-Tap


wired 347V

Options 7

LL=Lamp Included 8



F2=Double Fused(208, 240 or 480V only)

PE=Internal Photocontrol(Specify Voltage) 9


Accessories 10

UB-U Universal BKT=UniversalMountingBracket

WG/GP-GS=Wire GuardPE-347V=Field Installed

Photocontrol, 347VPE-480V=Field Installed

Photocontrol, 480VPE/MT=Field Installed

PhotocontrolTRSD-8/32=Tamper-Resistant

Screwdriver

6 3/4" [171mm]10" [254mm]

7"[178mm]

9 3/16" [234mm]

2 1/2" [64mm]Sq.

6 1/4"[159mm]

Sq.7/8"

[22mm]

GS SUPER SMOKEY



Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150WMetal Halide (MH) 175WHigh Pressure Sodium (HP) 35, 50, 70W


NOTES: Options not available with stock products. Order accessories as separate item for field installation. Refer to standard ordering information to add options and accessories. Refer to In-Stock Guide for availability.


SAMPLE NUMBER: MPGS-15-MT-LL


Metal Halide

SeriesGS=Super Smokey

Lamp Wattage15=150W

VoltageMT=Multi-Tap

OptionsLL=Lamp Included

WA

LL M

OU

NT

COOPER LIGHTING 80


NOTES: 1 70W maximum. 2 All HID lamps are medium-base. 3 120V only. 4 480V not available in 35 or 50W. 5 Products also available in non-US voltages and 50Hzfor international markets. 6 Electronic ballast available on 26 and 52W CF units. 7 Add as suffix in the order shown. 8 Lamp is Cooper designated productbased on luminaire requirements. Specified lamps must be ordered as a separate line item. 9 Order separately, replace XX with color specification. 10 Specifications and dimensions subject to change without notice.



• Optical system is sealedwith closed-cell, gas-filled, high-temperaturesilicone gasketing

• Can be ceiling, wall orpole mounted in horizontal or vertical position. 1/2" knockoutson side of housing accommodate surface-mounted conduit, or backplate can be mounted to4" octagonal J-box

• Injection-molded prismatic polycarbonaterefractor is available inwhite or clear



The Lumark Smokey combinescontemporary design with a premium die-cast aluminum housing and sturdy injection-molded polycarbonate refractor,creating a fixture which is bothdurable and attractive.


SAMPLE NUMBER: MPVR-PC-50-120V-LL

NOTES: Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add optionsand accessories. Refer to In-Stock Guide for availability.



SodiumCF=Compact

Fluorescent

SeriesVR=Smokey

Refractor TypePC=Clear

PolycarbonatePW=White

Polycarbonate 1

Lamp Wattage 2

MP50=50W 4

70=70W100=100W 3

HP35=35W 3, 4

50=50W70=70W 4

100=100WCF13=13W26=26W52=(2) 26W

Voltage 5

120V208V240V277V347V480V 6

MT=Multi-Tap wired 277V

TT=Triple-Tap wired 347V

E=Electronic 120-277V 6


SAMPLE NUMBER: BS10

SeriesB=Smokey


Sodium


Options 7

LL=Lamp Included 8

TR=Tamper Resistant Screws





Accessories 9

UB-U Universal BKT=UniversalMountingBracket

WG/GP-GS=Wire GuardPE-347V=Field Installed

Photocontrol, 347VPE-480V=Field Installed

Photocontrol, 480VTRSD-8/32=Tamper-Resistant

ScrewdriverPE/MT=Field Installed

PhotocontrolHV/VR-XX=Horizontal VisorVV/VR=Vertical Visor

10"[254mm]

7" [178mm] 7" [178mm]

2 1/2"square[64mm]

6 1/4"[159mm]

7/8" diameter[22mm]9 3/16"

[233mm]


VR SMOKEY


Pulse Start Metal Halide



Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100WHigh Pressure Sodium (HP) 35, 50, 70WCompact Fluorescent (CF) 13, 26, (2) 26W

Voltage ChartMT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)E=Electronic (CF only) 120/277V

WA

LL M

OU

NT

COOPER LIGHTING81


10"[254mm]

6 3/4"[171mm]

7"[178mm]

2 1/2"square[64mm]

6 1/4"[159mm]

7/8" diameter[22mm]9 3/16"

[233mm]

• U.L. listed wet locations.CSA certified


• Precision aluminum reflector / visor system directs light down and out, eliminating glare and wasted light

• Optical system is sealedwith foam-in-place silicone gasketing

• Can be mounted to anyvertical surface. 1/2" knockouts on side of housing accommodatesurface-mounted conduit,or back plate can bemounted to 4" octagonalJ-box

• Injection-molded polycarbonate refractor is available in white orclear prismatic


D I M E N S I O N S



The Lumark Micro-Pak featurespremium die-cast aluminum construction for durability and precision-designed optics tothrow light down and out andeliminate glare and wasted light.

NOTES: 1 70W maximum. 2 All HID lamps are medium-base. 3 120V only. 4 Not available in 480V. 5 Products also available in non-US voltages and 50Hz for international markets. 6 Electronic ballast available on 26 and 52W CF units. In cold temperature, compact fluorescent lamps produce lower illumination levels. 7 Add as suffix in the order shown. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements.Specified lamps must be ordered as a separate line item. 9 Order separately. 10 Specifications and dimensions subject to change without notice.


SAMPLE NUMBER: MPMP-PC-50-120V-LL

NOTES: Options not available with stock products. Order accessories as separate item for field installation. Refer to standard ordering information to add op-tions and accessories. Refer to In-Stock Guide for availability.



SodiumCF=Compact

Fluorescent

SeriesMP=Micro-Pak


PolycarbonatePW=White

Polycarbonate 1

Lamp Wattage 2

MP50=50W 5

70=70W100=100W 3

HP35=35W 4

50=50W 5

70=70W100=100WCF13=13W26=26W52=(2) 26W

Voltage 5

120V208V240V277V347V480VDT=Dual-TapMT=Multi-Tap


wired 347VE=Electronic

120-277V 6

S T O C K S A M P L E N U M B E R ( L a m p I n c l u d e d : H i g h P r e s s u r e S o d i u m )

SAMPLE NUMBER: MS10

SeriesM=Micro-Pak


Sodium


NOTES: Options not available with stock products. Order accessories as separate item for field installation. Refer to standard ordering information to add options and accessories. Refer to In-Stock Guide for availability.

S T O C K S A M P L E N U M B E R ( L a m p I n c l u d e d : P u l s e S t a r t M e t a l H a l i d e )

SAMPLE NUMBER: MPMP-PC-70-120 /277-LL

SeriesMP=Micro-Pak


Metal Halide


Polycarbonate

Lamp Wattage70=70W

Voltage120/277=120/277V

LampLL=Lamp Included

Options 7

LL=Lamp Included 8





PC=Button TypePhotocontrol

Colors__=Bronze

(Standard)WHT=White

Accessories 9

PE-347V=Field InstalledPhotocontrol, 347V

PE-480V=Field Installed Photocontrol, 480V

PE/MT=Field Installed Photocontrol

TRSD-8/32=Tamper-ResistantScrewdriver

HV/VR-XX=Horizontal Visor

MP MICRO-PAK




Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100WHigh Pressure Sodium (HP) 35, 50, 70WCompact Fluorescent (CF) 13, 26, (2) 26W

Voltage ChartMT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)E=Electronic (CF only) 120/277V

WA

LL M

OU

NT

COOPER LIGHTING 82



Catalog Lamp Lamp BallastNumber Type Wattage Type Voltage ColorHigh Pressure SodiumLS50G ED17 50 Reactor/NPF 120V BronzeLS70G ED17 70 Reactor/NPF 120V BronzeLS10G ED17 100 Reactor/NPF 120V BronzeLS15G ED17 150 Reactor/NPF 120V BronzePulse Start Metal HalideLP70G ED17 70 Hi. Reac/NPF 120V/277V BronzeLP10G ED17 100 Hi. Reac/NPF 120V/277V BronzeCompact FluorescentLC42 Gx24q-4 (4-pin) 42 Electronic 120V/277V BronzeNOTE: Add “W” to the end of catalog number for white finish for Pulse Start Metal Halide or High Pressure Sodium models only. Add

“WHT” to the end of accessory for white finish (Example: WY/WG-WHT). In cold temperatures, Compact Fluorescent lamps produce lower illumination levels.

Accessories (order separately)WY/WG=Glass Wire GuardWY/GS=Glass Door Replacement (Bronze)WY/FC/GS=Full Cutoff Visor for Glass (Bronze)WY/PC=Polycarbonate replacement lens. Not for use with WY/WG and WY/FC.


Catalog Lamp Lamp BallastNumber Type Wattage Type Voltage ColorHigh Pressure SodiumLS50C ED17 50 Reactor/NPF 120V BronzeLS70C ED17 70 Reactor/NPF 120V BronzeLS10C ED17 100 Reactor/NPF 120V BronzeLS15C ED17 150 Reactor/NPF 120V BronzePulse Start Metal HalideLP70C ED17 70 Hi. Reac/NPF 120V/277V BronzeLP10C ED17 100 Hi. Reac/NPF 120V/277V BronzeCompact FluorescentLC42C Gx24q-4 (4-pin) 42 Electronic 120V/277V BronzeNOTE: Add “W” to the end of catalog number for white finish. Add “WHT” to the end of accessory for white finish (Example: WY/CO-

WHT). Not available in 42W Compact Fluorescent. In cold temperatures, Compact Fluorescent lamps produce lower illuminationlevels.

Accessories (order separately)WY/CO=Cutoff Replacement Door (Bronze). Not available in 42W Compact Fluorescent.WY/FC/CO=Full Cutoff Visor for Cutoff (Bronze)


The Lumark Wally Glass combines contemporary styling and optimum performance. A varietyof mounting options add to theversatility of this compact fixture.

• U.L. listed for wet locations.CSA certified

• Die-cast aluminum housingfinished in a durable bronzepolyester powder coat finish

• HID: 4Kv medium-basesocket. CFL: Gx24q-4 (4-pin)

• HID: Medium-base lamp included and available in150W High Pressure Sodiumor 100W Pulse Start MetalHalide. Supplied with 4-pin, 42W Compact Fluorescent lamp

• Special one-piece hingeddoor design held in placewith slot-head captivescrews. Silicone gasketingseals out dirt and contaminants

• Borosilicate glass lens orpolycarbonate lens minimizes direct lamp imaging

• Ships completely prewiredand preassembled. Easilymounts to J-box, wall forquick installation



Lumark’s Cutoff Wally is a cutoff classified wall luminaire.Combining compact, aerodynamic styling with higherwattage performance, it is idealfor areas where spill light andglare control must be managedeffectively.

• U.L. listed for wet locations

• Die-cast aluminum housingfinished standard bronzepolyester powder coat


• HID: Medium-base lamp included and available in150W High Pressure Sodiumor 100W Pulse Start MetalHalide. CFL: Supplied with 4-pin, 42W Compact Fluorescent lamp

• Special one-piece door design held in place with slot-head captive screws, provides low-glare cutofflighting. Silicone gasketingseals out dirt and contaminants

• Patterned tempered glasslens minimizes direct lampimaging

• Ships completely prewiredand preassembled. Easilymounts to J-box, wall forquick installation



D A R K S K Y CO WALLY CUTOFF





WALLY





WA

LL M

OU

NT

COOPER LIGHTING83



Catalog Lamp Lamp BallastNumber Type Wattage Type Voltage ColorHigh Pressure SodiumHPFZ15 B17 150 Reactor/NPF 120V BronzePulse Start Metal HalideMPFZ15 ED17 150 CWA Multi-Tap BronzeMetal Halide (International Use Only)MHFZ17 ED28 175 CWA Multi-Tap BronzeCompact FluorescentCFFZ84 Gx24q-4 84 (2-42W) Electronic 120-277V Bronze


Catalog Lamp Lamp BallastNumber Type Wattage Type Voltage ColorHigh Pressure SodiumHPFZ15C B17 150 Reactor/NPF 120V BronzePulse Start Metal HalideMPFZ15C ED17 150 CWA Multi-Tap BronzeMetal Halide (International Use Only)MHFZ17C ED28 175 CWA Multi-Tap BronzeCompact FluorescentCFFZ84C GX24q-4 84 (2-42W) Electronic 120-277V Bronze

S P E C I F I C A T I O N F E A T U R E SD E S C R I P T I O N

The Lumark Z-Pak provides adurable and efficient exterior light source for any application requiring maximum performanceand minimum maintenance. The rugged, die-cast aluminumhousing, stainless steel hardwareand sealed and gasketed opticscompartment combine to makethe Z-Pak virtually impenetrable to contaminant’s.

S P E C I F I C A T I O N F E A T U R E SD E S C R I P T I O N

Lumark’s cutoff Z-Pack is a low angle / low glare classifiedwall luminaire. Combining compact, aerodynamic stylingwith higher wattage performance,it is ideal for areas where spilllight and glare control must bemanaged effectively.


• Die-cast aluminum housingfinished in a durable bronzepolyester powder coat


• HID: Medium-base lamp included and available in150W High Pressure Sodium,150W Pulse Start MetalHalide or 175W Metal Halide(International Use Only). CFL:(2) 42W CF lamps included

• One-piece die-cast door assembly is hinged on the side for easy relampingand maintenance. A siliconegasket seals out dirt and contaminants

• Impact-resistant borosilicateglass refractor

• Mounts to J-box or can besurface mounted throughtapped openings



• Die-cast aluminum housingfinished in a standard bronzepolyester powder coat finish


• HID: Medium-base lamp included and available in150W High Pressure Sodium,150W Pulse Start MetalHalide or 175W Metal Halide(International Use Only). CFL:(2) 42W CF lamps included

• Mounts to J-box or can besurface mounted throughtapped openings

• Special one-piece door design provides low-glarecutoff lighting. Silicone gasketing seals out dirt andcontaminants. Ships completely prewired and preassembled. Easily mountsto J-box, wall for quick installation

• Patterned tempered glasslens minimizes direct lampimaging. Lens assembly ishinged on the side for easyrelamping and maintenance


Z-PAK




Z-PAK CUTOFF




Accessories (order separately)FZ/CO=Cutoff Door Replacement (Bronze)FZ/FC/CO=Full Cutoff Visor for Cutoff (Bronze)

FZ/VS/CO=Vandal Shield for Cutoff (Bronze) NOTE: Add “WHT” to the end of accessory for white finish (Example: FZ/CO-WHT).

Accessories (order separately)FZ/WG=Wire GuardFZ/GS=Glass Door Replacement (Bronze)

FZ/FC/GS=Full Cutoff Visor for Glass (Bronze)FZ/VS/GS=Vandal Shield for Glass (Bronze)

NOTE: Add “WHT” to the end of accessory for white finish (Example: FZ/WG-WHT).

NOTE: Add “W” to the end of catalog number for white finish. Not available in 84W Compact Fluorescent. In cold temperatures, CompactFluorescent lamps produce lower illumination levels.

NOTE: Add “W” to the end of catalog number for white finish. Not available in 84W Compact Fluorescent. In cold temperatures, CompactFluorescent lamps produce lower illumination levels.

WA

LL M

OU

NT

OP

TIO

NS

+ A

CC

ES

SO

RIE

S

COOPER LIGHTING 84

COOPER LIGHTING - LUMARKW A L L - M O U N T E D A C C E S S O R I E S

WG/WLWire Guard for Wal-Pak

(Not compatible with PCS)

VS/WLFor Wal-Pak

Visor Cutoff Shield

PCSPolycarbonate Shield

(Not Compatible with WG/WL)

UBUniversal Mounting Bracket

OU

TD

OO

R A

RE

A /

SIT

E

COOPER LIGHTING85

COOPER LIGHTING - LUMARKS P E C I F I C A T I O N F E A T U R E S

D I R E C T M O U N T 1 8 " A R M


The Lumark Eternalume is ideal for perimeter area lighting, residential and commercial security lighting, residential streets, parking areas,and loading platforms.

NOTES: 1 Includes 18" arm, lamp and 120V photocontrol. 2 HP only. 3 All products are 120V. 4 Specifications and dimensions subject to change without notice.

12" [305mm]13 2/3" [348mm]

16" [406mm]w/ Photocontrol

2 3/4" [70mm] 18" [457mm]

2 1/8"[54mm]

13"[330mm]


• NEMA twistlock style photocontrol for automatic dusk-to-dawnoperation

• Precision die-cut aluminum housing with natural finish

• Reactor, NPF Core and coil ballast for durable operation

• Can be pole or wall mounted. 1 5/8" O.D. slipfitter hardware included

• HP: 120/60Hz, Reactor,NPF core and coil magnetic ballast. MP:120/60Hz, High reactance(Hx) NPF core and coilmagnetic ballast

• Porcelain mogul- or medium-base screw shellsocket with spring loadedcenter contact HP:Mogul-base. MP:Medium-base (protected)

• Fluted, formed specular aluminum reflector fastens to main housingfor secure fit

• 12" open bottom, acrylicrefractor

• Pulse Start Metal Halideor High Pressure Sodiumlamp included



Metal HalideHP=High

PressureSodium

Series 1

EL=EternalumeLamp Wattage70=70W 2

10=100W15=150W 2

AccessoriesEL/FSC=Full Cutoff Shield (Dark Sky Complaint) 2

L-A24=24" Arm with HardwareOA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol Receptacle


SAMPLE NUMBER: MPEL70

NOTES: 1 HP only. 2 All products are 120V. 3 Specifications and dimensions subject to change without notice. Options not available with stock products. Refer to standard ordering information to add options and accessories.


Metal HalideHP=High

PressureSodium

SeriesEL=Eternalume

Lamp Wattage70=70W10=100W15=150W 1


SAMPLE NUMBER: MPEL10

Lamp Type WattageMetal Halide (MP) 70, 100WHigh Pressure Sodium (HP) 70, 100, 150W

ETERNALUMEAREA LIGHT


L O W W A T T A G ES E C U R I T Y L U M I N A I R E

E P A - E f f e c t e d P r o j e c t e d A r e a : 1 . 2

OU

TD

OO

R A

RE

A / S

ITE

COOPER LIGHTING 86



Metal Halide MH=Metal HalideHP=High Pressure

Sodium

Series 1TR=Tribute

Distribution2F=Type II Formed2S=Type II Segmented3F=Type III Formed3S=Type III Segmented4F=Type IV Formed4S=Type IV Segmented5F=Type V Formed5S=Type V SegmentedSL=Spill Light Eliminator

Lamp Wattage 2

MP70=70W100=100W150=150W200=200W250=250W320=320W350=350W400=400W

MH 3

175=175W250=250W400=400WHP70=70W100=100W150=150W250=250W400=400W

Voltage 5

120V208V240V277V347V 6

480VMT=Multi-Tap wired 277VTT=Triple-Tap wired 347V 65T=5-Tap wired 480V 5


(See Below)


SAMPLE NUMBER: MHTR-SL-400-MT-LL

Options 7, 8

F1=Single Fuse (120, 277 or 347V only) 9F2=Double Fuse (208, 240 or 480V only) 9Q=Quartz Restrike (Hot strike only) 10

LL=Lamp IncludedEM=Quartz Restrike with “Delay Relay” (Quartz

lamps strikes at both hot and cold starts) 10

EM/SC=Emergency Separate Circuit 10

LL=Lamp IncludedS=1 1/4"-2 3/8" Internal Mast Arm MountTM=Trunnion MountPT=Electrical Power TrayHS=House Side Cutoff 11

LA=Less Arm (Order Mounting Separately)PER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type PhotocontrolWH=WhiteBK=BlackAP=GreyDP=Dark PlatinumGM=Graphite Metallic

Accessories 12

MA1201-XX=Direct Wall Mount Kit 1

MA1218-XX=Direct Mount for Pole 1

MA1219-XX=Wall Mount PlateOA1090-XX=Adjustable Slipfitter Arm for Tenon Mount 2 3/8" O.D. 1

MA1221-XX=External House Side Shield Kit [EPA=0.38]MA1222=Internal House Side Shield Kit for 2S/3S MA1223=Internal House Side Shield Kit for 4S MA1224=Internal House Side Shield Kit for 2F/3FMA1225=Internal House Side Shield Kit for 4FMA1010-XX=Single Tenon Adapter for 3 1/2" O.D. TenonMA1011-XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. TenonMA1012-XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. TenonMA1013-XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. TenonMA1014-XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. TenonMA1015-XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. TenonMA1016-XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. TenonMA1017-XX=Single Tenon Adapter for 2 3/8" O.D. TenonMA1018-XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. TenonMA1019-XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. TenonMA1045-XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. TenonMA1048-XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. TenonMA1049-XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. TenonOA/RA1016=Photoelectric Control 105-285V NEMA Type OA/RA1201=Photoelectric Control 347V NEMA TypeOA/RA1027=Photoelectric Control 480V NEMA Type OA/RA1013=Shorting Cap TR/VS=Field Installed Vandal Shield 13


• Rugged one-piece die-castaluminum housing anddoor

• One-piece silicone gasket protects the optical chamber fromperformance degradingcontaminants

• One (1) stainless steelspring latch and two (2)stainless steel hingesallow toolless opening andremoval of door frame

• Choice of nine high efficiency optical distributions (Formed,Segmented and SpillLight Eliminator)

• Optical modules are field rotatable in 90° increments

• Standard with mogul-base lampholders for150-400W assemblies ormedium-base for 100Wand below

• Optional swing-downpower tray with integralhandle and quick-disconnect

• Optional internal mastarm mount accepts 1 1/4"to 2 3/8" O.D. horizontaltenon, while a 4-boltclamping mechanism secures fixture



The Lumark Tribute Series is themost versatile, functionally designed, universally adaptableoutdoor luminaire available. The Tribute brings outstandingperformance to walkways, parkinglots, roadways, loading docks,building areas, and any securitylighting application.

6 1/2"[165mm]

8" [203mm]

15 1/2" [394mm]

22" [559mm]


D A R K S K Y FCO

DRILL ING PATTERNS

TYPE “M” WALL MOUNT TRUNNION

E P A - E f f e c t e d P r o j e c t e d A r e a : 1.19 (without arm)

Lamp Type WattagePulse Start Metal Halide (MP)70, 100, 150, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 70, 100, 150, 250, 400W

Voltage ChartDT=Dual-Tap 120/277V (wired 277V)MT=Multi-Tap 120/208/240/277V (wired 277V)TT=Triple-Tap 120/277/347V (wired 347V)5T=5-Tap 120/208/277/347/480V (wired 480V)

TR TRIBUTE



A R E A L U M I N A I R E


NOTES: 1 8" arm and round pole adapter included with fixture. Specify Less Arm “LA” option when mounting accessory is ordered separately. 2 Standard withmogul-base socket for 150-400W and medium-base socket 100W and below. 3 175, 250 and 400W MH available for non-US markets only. 4 Requires reducedenvelope lamp. 5 Products also available in non-US voltages for international markets. Consult factory for availability and ordering information. 6 88% efficient EISA compliant MP fixtures not available in 347V or Triple-tap. 7 Custom and RAL color matching available upon request. Consult Cooper LightingRepresentative for further information. 8 Add as suffix. 9 Must specify voltage. 10 Quartz options not available with SL optic. 11 House side shield not available on 5S, 5F or SL optics. 12 Order separately/replace with color specification. 13 Not available with SL optic or House Side Shield. 14 Specificationsand dimensions subject to change without notice.


Metal Halide HP=High Pressure

Sodium 2

Series 1TR=Tribute

Distribution23= Type II/III

Formed4F=Type IV

Formed 3

Lamp Wattage15=150W25=250W32=320W40=400W


SAMPLE NUMBER: MPTR2340

NOTES: 1 Short logic fixtures are finished bronze include multi-tap ballast, lamp, arm and round pole adapter. Other options notavailable. Refer to standard ordering logic. 2 Available in 150,250 and 400W. 3 Available in 320 and 400W MP & HP.Refer to In-Stock Guide for availability.

12"[305mm]

4 7/8"[124mm]

9/16" [14mm]Dia. Hole (4)

6 1/2"[165mm]

8"[203mm]

10 1/2"[267mm]


(2) 5/8" [16mm]dia. holes

4 7/8" [124mm]

2 7/16" [124mm]

2 5/16"[59mm]

3 3/4" [95mm]

1 7/8"[48mm]


1"[25mm]

9/16" [14mm]dia. hole (2)

OU

TD

OO

R A

RE

A /

SIT

E

COOPER LIGHTING87


6 1/2"[165mm]

8" [203mm]

15 1/2" [394mm]

22" [559mm]


D I M E N S I O N SD E S C R I P T I O N

The Lumark Tribute Pole/FixtureCombo is an all inclusive package that allows for easy selection and installation of polesand fixtures. Each combo includes a, die-cast Tribute arealuminaire, 8" arm, lamp, squarestraight steel pole and necessaryanchorage. Available in single ordual fixture combinations.


S A M P L E N U M B E R : P F T 1 1 5 2 3 M 1 5

SeriesPFT=Tribute

No. of Fixtures1=1


Distribution23=Type II/III

Formed4F=Type IV

Formed

Lamp Type 1

(Included)P=Pulse Start

Metal HalideH=High Pressure

Sodium

PoleHeight (ft.)15=15'20=20'25=25'30=30'

Zone 1

9=90 mph0=100 mph

Options 2

N/AB=No Anchor Bolts (Used when ordered separately)

NOTES: 1 0 or 9 are noted where needed to designate a heavier gauge pole. 2 Supplied with 4A Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 15' combo SSS4A15SFM4, 20' combo SSS4A20SFM4 and 25' combo SSS4A25SFM4. 3 Supplied with 5A Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 25' combo SSS5A25SFM4 and 30' combo SSS5A30SFM4. 4 Supplied with 5M Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 30' combo SSS5M30SFM4. 5 Supplied with 6M Square Straight Steel shaft (SSS), anchor bolts (AB3), template (TMP2) and base cover. 30' combo SSS6M30SFM4.

Lamp Source/Number of Fixtures Pole Height Wattage Distribution 80 MPH 90 MPH 1 100 MPH 1

PULSE START METAL HALIDESingle Fixture 15' Pole 150W MP Type II/III PFT11523P15 2 PFT11523P15 2 PFT11523P15 2

Type IV PFT1154FP15 2 PFT1154FP15 2 PFT1154FP15 2

20' Pole 250W MP Type II/III PFT12523P20 2 PFT12523P20 2 PFT12523P20 2


320W MP Type II/III PFT13223P20 2 PFT13223P20 2 PFT13223P20 2
















HIGH PRESSURE SODIUMSingle Fixture 15' Pole 150W HP Type II/III PFT11523H15 2 PFT11523H15 2 PFT11523H15 2

Type IV PFT1154FH15 2 PFT1154FH15 2 PFT1154FH15 2

20' Pole 250W HP Type II/III PFT12523H20 2 PFT12523H20 2 PFT12523H20 2


400W HP Type II/III PFT14023H20 2 PFT14023H20 2 PFT14023H20 2











D A R K S K Y FCO

DRILL ING PATTERN

TYPE “M”



4 7/8" [124mm]

2 7/16" [124mm]

2 5/16"[59mm]



• One-piece silicone gasket protects the optical chamber from performance degradingcontaminants

• One (1) stainless steelspring latch and two (2)stainless steel hinges allowtoolless opening and removal of door frame


• Standard with mogul-base lampholders

• Includes 8" arm completewith lamp, square straightsteel pole and necessaryanchorage

• Available in dual configuration


PFT TRIBUTE ANDPOLE COMBO(SINGLE)


15'-30'Square Straight Steel Pole

P O L E A N D F I X T U R EC O M B O

Lamp Type WattagePulse Start Metal Halide (P) 150, 250, 320, 400WHigh Pressure Sodium (H) 150, 250, 400W

NOTES: 1 8" arm and lamp included with fixture. 2 N/AB models available by specifying N/AB (Example: PFT11523P15N/AB). 3 Supplied with multi-tap ballast120/208/240/277V (wired 277V) with square straight steel shaft, anchor bolts, template, base cover and hardware.

OU

TD

OO

R A

RE

A / S

ITE

COOPER LIGHTING 88


6 1/2"[165mm]

8" [203mm]

15 1/2" [394mm]

22" [559mm]



The Lumark Tribute Pole/FixtureCombo is an all inclusive package that allows for easy selection and installation of polesand fixtures. Each combo includes a, die-cast Tribute arealuminaire, 8" arm, lamp, squarestraight steel pole and necessaryanchorage. Available in single ordual fixture combinations.


S A M P L E N U M B E R : P F T 2 1 5 2 3 M 1 5

SeriesPFT=Tribute

No. of Fixtures2=2


Distribution23=Type II/III

Formed4F=Type IV

Formed

Lamp Type 1

(Included)P=Pulse Start

Metal HalideH=High Pressure

Sodium

PoleHeight (ft.)15=15'20=20'25=25'30=30'

Zone 1

9=90 mph0=100 mph

Options 2

N/AB=No Anchor Bolts (Used when ordered separately)

NOTES: 1 0 or 9 are noted where needed to designate a heavier gauge pole. 2 Supplied with 4A Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 15' combo SSS4A15SFM4, 20' combo SSS4A20SFM4 and 25' combo SSS4A25SFM4. 3 Supplied with 5A Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 25' combo SSS5A25SFM4 and 30' combo SSS5A30SFM4. 4 Supplied with 5M Square Straight Steel shaft (SSS), anchor bolts (AB1), template (TMP1) and base cover. 30' combo SSS5M30SFM4. 5 Supplied with 6M Square Straight Steel shaft (SSS), anchor bolts (AB3), template (TMP2) and base cover. 30' combo SSS6M30SFM4.

Lamp Source/Number of Fixtures Pole Height Wattage Distribution 80 MPH 90 MPH 1 100 MPH 1

PULSE START METAL HALIDEDual Fixture 15' Pole 150W MP Type II/III PFT21523P15 2 PFT21523P15 2 PFT21523P15 2




















HIGH PRESSURE SODIUMDual Fixture 15' Pole 150W HP Type II/III PFT21523H15 2 PFT21523H15 2 PFT21523H15 2
















• One-piece silicone gasket protects the optical chamber from performance degradingcontaminants

• One (1) stainless steelspring latch and two (2)stainless steel hinges allowtoolless opening and removal of door frame


• Standard with mogul-base lampholders

• Includes 8" arm completewith lamp, square straightsteel pole and necessaryanchorage

• Available in single configuration



D A R K S K Y FCO

DRILL ING PATTERN

TYPE “M”



4 7/8" [124mm]

2 7/16" [124mm]

2 5/16"[59mm] PFT

TRIBUTE ANDPOLE COMBO

(DUAL)



15'-30'Square Straight Steel Pole

P O L E A N D F I X T U R EC O M B O

Lamp Type WattagePulse Start Metal Halide (P) 150, 250, 320, 400WHigh Pressure Sodium (H) 150, 250, 400W

NOTES: 1 8" arm and lamp included with fixture. 2 N/AB models available by specifying N/AB (Example: PFT21523P15N/AB). 3 Supplied with multi-tap ballast120/208/240/277V (wired 277V) with square straight steel shaft, anchor bolts, template, base cover and hardware.

OU

TD

OO

R A

RE

A /

SIT

E

COOPER LIGHTING89

• UL Wet Location Listed.EISA Compliant

• Die-cast aluminum housing and integrally cast door hinge finished in durable grey polyesterpowder coat

• The reflector is precisionhydroformed anodizedaluminum with a Dacronpolyester filter

• Die-cast aluminum doorframe has two-positionlatch to ensure door staysfastened under extremeconditions

• Removable prismatic refractor for use with high pressure sodium and metal halide lampsources

• Hard mounted ballastwith encapsulated starterand plastic terminal blockfor protection from environmental abuse

• Two-bolt/one clamp slipfitter for 1 1/4" or 2"mounting arms


NOTES: 1 Acrylic refractor for 175W maximum. Polycarbonate refractor for 250 maximum. 2 400W MH requires reduced envelop lamp (ED28) for flat glass. 3 100Wand below MP is medium-base. All other lamps are mogul-base. Lamp not included. 4 175, 250 and 400W MH for non-US markets. 5 Products also availablein non-US voltages and 50Hz for international markets. 6 88% efficient EISA compliant fixtures not available in 347V or Triple-tap voltages. 7 Add as suffix inthe order shown. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps mustbe ordered as a separate line item. 9 Order separately. 10 Specifications and dimensions subject to change without notice.

Options 7


H=Plug-In Starter 4

K=Leveling IndicatorT=Swing-Down BallastPER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol

Accessories 9

OA/RA1016=Photoelectric Control, 105-285 Volt NEMA TypeOA/RA1027=Photoelectric Control, 480 Volt NEMA TypeOA1028=Field-installed NEMA Twistlock Photocontrol Receptacle

(Order Photocontrol Separately)

E P A - E f f e c t e d P r o j e c t e d A r e a : . 8 7



HalideHP=High

PressureSodium

SeriesRY=Roadway

Cobrahead

Lens TypeAL=Acrylic Refractor 1

GL=Glass RefractorPL=Polycarbonate

Refractor 1

FL=Flat Glass Lens 2

Distribution2=Type II3=Type III

Lamp Wattage 3

MP50=50W70=70W100=100W150=150W250=250W320=320W350=350W400=400WMH 4

175=175W250=250W400=400W

HP50=50W70=70W100=100W150=150W250=250W400=400W

Voltage 5

120V208V240V277V347V 6



(See Below)


SAMPLE NUMBER: HPRY-GL-3-400-MT-LL



Roadway Cobrahead fixtures feature durable die-cast aluminum construction and a computer-designed optical system for sturdiness and optimum photometric control.

28 1/4" [718mm]

11 1/4"[286mm]

13 1/4" [337mm]

RY ROADWAY COBRAHEAD


S I T E / R O A D W A Y L I G H T

Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 50, 70, 100, 150, 250, 400W


NOTES: Options not available with stock products. Order accessories as separate items for field installation. Refer to standard ordering information to add optionsand accessories. Refer to In-Stock Guide for availability.

Lamp TypeHP=High

PressureSodium

SeriesRY=Roadway

Cobrahead

Lens TypeGL=Glass

Refractor

Distribution3=Type III

Lamp Wattage400=400W

VoltageMT=Multi-Tap

wired 277V

OptionsPER=NEMA Twistlock

Photocontrol Receptacle


SAMPLE NUMBER: HPRY-GL-3-400-MT-PER


OU

TD

OO

R A

RE

A / S

ITE

COOPER LIGHTING 90



• Die-cast aluminum housingand integrally cast doorhinge finished in durablegrey polyester powder coat



• Removable prismatic refractor for use with highpressure sodium andmetal halide lamp sources

• Hard mounted ballast withencapsulated starter andplastic terminal block forprotection from environmental abuse




Roadway Cobrahead fixtures feature durable die-cast aluminum construction and acomputer-designed optical system for sturdiness and optimum photometric control.


27 3/32" [688mm]

9 3/4"[248mm]

12 5/8" [321mm]


RS ROADWAY

SMALL COBRAHEAD




Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150, 200, 250WMetal Halide (MH) 175, 250WHigh Pressure Sodium (HP) 50, 70, 100, 150, 250W


NOTES: 1 Acrylic refractor for 175W maximum. 2 100W and below MP is medium-base. All other lamps are mogul-base. Lamp not included. 3 175 and 250W MH fornon-US markets only. 4 88% efficient EISA compliant fixtures not available in 347V or Triple-tap voltages. 5 Add as suffix in the order shown. 6 Lamp isshipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate lineitem. 7 HPS only. 8 Order separately. 9 Specifications and dimensions subject to change without notice.

Options 5


H=Plug-In Starter 7

K=Leveling IndicatorT=Swing-Down BallastPER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol

Accessories 8

OA/RA1016=Photoelectric Control, 105-285 Volt NEMA TypeOA/RA1201=Photoelectric Control, 347 Volt NEMA TypeOA/RA1027=Photoelectric Control, 480 Volt NEMA TypeOA1028=Field-installed Photocontrol Receptacle, NEMA Type




HalideHP=High

PressureSodium

SeriesRS=Roadway

SmallCobrahead

Lens TypeAL=Acrylic Refractor 1

GL=Glass RefractorPL=Polycarbonate

RefractorFL=Flat Glass Lens


Lamp Wattage 2

MP50=50W70=70W100=100W150=150W200=200W250=250WMH 3

175=175W250=250W

HP50=50W70=70W100=100W150=150W250=250W

Voltage120V208V240V277V347V 4



(See Below)


SAMPLE NUMBER: HPRS-GL-3-400-MT-LL

OU

TD

OO

R A

RE

A /

SIT

E

COOPER LIGHTING91


• Die-cast aluminum housing with stainlesssteel bail latch. Standardgrey polyester powdercoat finish



• Removable tempered flat glass refractor for use with high pressuresodium, metal halide andmercury lamp sources.Optional drop lens available

• Hard mounted ballast with encapsulated starterfor protection from environmental abuse




Roadway Cobrahead fixtures feature durable die-cast aluminum construction and a computer-designed optical system for sturdiness and optimum photometric control.


30" [762mm]

9 3/4"[248mm]

16 15/16" [430mm]


D A R K S K Y FCONOTE: In all flat glass configurations only.

Lamp Type WattagePulse Start Metal Halide (MP) 150, 200, 250, 320, 350, 400WMetal Halide (MH) 175, 250, 400WHigh Pressure Sodium (HP) 150, 250, 400W



NOTES: 1 All other lamps are mogul-base. Lamp not included. 2 175, 250 and 400W MP & MH for non-US markets only. 3 400W MH requires reduced envelope lamp(ED28). 4 Product also available in non-US voltages and 50Hz for international markets. 5 88% efficient EISA compliant fixtures not available in 347V orTriple-tap voltages. 6 Add as suffix in the order shown. 7 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminairerequirements. Specified lamps must be ordered as a separate line item. 8 Order separately. 9 Specifications and dimensions subject to change without notice.

Options 6


H=Plug-In StarterK=Leveling IndicatorPER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol

Accessories 8





HalideHP=High

PressureSodium

SeriesRL=Roadway

Large CutoffCobrahead

Lens TypeFL=Flat Glass LensDL=Drop Glass Lens


Lamp Wattage 1

MP 3

150=150W200=200W250=250W320=320W350=350W400=400WMH 2, 3

175=175W250=250W400=400W

HP150=150W250=250W400=400W

Voltage 4

120V208V240V277V347V 5



(See Below)


SAMPLE NUMBER: HPRL-FL-3 -400-MT-LL

RL ROADWAYLARGE CUTOFFCOBRAHEAD




OU

TD

OO

R A

RE

A / S

ITE

COOPER LIGHTING 92



• Die-cast aluminum housingand integrally cast doorhinge finished in durablegrey polyester powder coat


• Die-cast aluminum doorframe with integral hingesfor toolless, relamping andmaintenance

• Removable tempered flatglass for use with highpressure sodium, metalhalide lamp sources. Optional clear drop glasslens available

• Hard mounted ballast withencapsulated starter andplastic terminal block forprotection from environmental abuse

• Two-bolt/one clamp slipfitter for 1 1/4" or 2" mounting arms



Roadway Cobrahead fixtures feature durable die-cast aluminum construction and acomputer-designed optical system for sturdiness and optimum photometric control.

27 3/32" [688mm]

6 17/32"[166mm]

12 5/8" [321mm]


D A R K S K Y FCONOTE: In all flat glass configurations only.

E P A - E f f e c t e d P r o j e c t e d A r e a : . 8 0 For Pole Information Refer to Cooper Lighting Pole Section.

Lamp Type WattagePulse Start Metal Halide (MP) 50, 70, 100, 150, 200, 250WMetal Halide (MH) 175, 250WHigh Pressure Sodium (HP) 50, 70, 100, 150, 250W


NOTES: 1 150W available in HP only. All HP and MP lamps 150W and above are mogul-base. Lamp not included. 2 All lamps are mogul-base except 150W MP andbelow are medium-base. Lamp not included. 3 175 and 250W MH for non-US markets only. 4 Products also available in non-US voltages and 50Hz for international markets. 5 88% efficient EISA compliant fixtures not available in 347V or Triple-tap voltages. 6 Add as suffix in the order shown. 7 Lamp isshipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a separate lineitem. 8 Order separately. 9 Specifications and dimensions subject to change without notice.

Options 6


H=Plug-In StarterK=Leveling IndicatorPER=NEMA Twistlock Photocontrol ReceptaclePC=Button Type Photocontrol

Accessories 8





HalideHP=High

PressureSodium

SeriesRC=Roadway

Small CutoffCobrahead

Lens TypeFL=Flat Glass LensDL=Drop Glass Lens


Lamp Wattage 1, 2

MP50=50W70=70W100=100W150=150W200=200W250=250WMH 3

175=175W250=250W

HP50=50W70=70W100=100W150=150W250=250W

Voltage 4

120V208V240V277V347V 5



(See Below)


SAMPLE NUMBER: HPRC-GL-3-400-MT-LL

RC ROADWAY

SMALL CUTOFFCOBRAHEAD




OU

TD

OO

R A

RE

A /

SIT

E

COOPER LIGHTING93


• Die-cast aluminum housing and cover. Standard bronze polyester powder coat finish

• Clamp type internal slipfitter for 2 3/8" O.D.pipe

• Anodized spun aluminumouter reflector housing.Light pattern can be oriented by rotating optical assembly (360°). A degree indicator is provided to identify theaiming position

• Inner hydroformed andanodized reflector

• Die-cast aluminum doorwith tempered convexglass lens, silicone rubbergasket and hinged andlatched door assembly for easy maintenance



The MC high mast area luminaire's asymmetric optics canbe oriented by rotating the opticalassembly 360°. The MC is ideal for use on areas requiring maximum spacing, such as areasbelow tall industrial mezzaninesand interstate highways.

NOTES: 1 Standard color is bronze, other finish colors available. Consult your Cooper Lighting Representative. 2 Products also available in non-US voltages and50Hz for international markets. 3 88% efficient EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 Add suffix in the order shown. 5 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as aseparate line item. 6 Order separately. 7 400W MH available in non-US markets only. 5T available in 400W MH only. 8 Specifications and dimensions subjectto change without notice.

2 3/8"[61mm]

O.D. Pipe 23 3/4"[503mm]

19 3/8"[492mm]

4 3/8"[111mm]

28" [711mm]

Horizontal Lamp Configuration

E P A - E f f e c t e d P r o j e c t e d A r e a : 1 . 4 6


SAMPLE NUMBER: MPMC-3-D-1000-120V



SodiumMH=Metal Halide

Series 1

MC=High Mast

Optics1=Type I2=Type II3=Type III4=Type IV

DistributionA=SCO (Short Cutoff)D=MCO (Medium Cutoff)E=MSCO (Medium Semi Cutoff)L=LMCO (Long Semi Cutoff)

Lamp WattageMP400=400W750=750W1000=1000WMH400=400W1000=1000WHP400=400W600=600W750=750W1000=1000W

Voltage 2

120V208V240V277V480V347V 3

MT=Multi-Tapwired 277V

TT=Triple-Tapwired 347V 3

5T=5-Tapwired 277V 5

Options 4



LL=Lamp Included 5

MOV=Lighting SurgeProtector

G=Tempered Flat GlassLens (Clear)

FILT=Four-Stage Air Filter(Sintered bronze filterprevents the entranceof contaminants)

PER=NEMA TwistlockPhotocontrolReceptacle


ColorsWH=WhiteBK=BlackAP=Grey

Accessories 6

OA1153=External CutoffShield (.90 EPA)

OA/RA1016=PhotoelectricControl, 105-285 VoltNEMA Type

OA/RA1027=PhotoelectricControl, 480Volt NEMAType


Lamp Type WattagePulse Start Metal Halide (MP) 400, 750, 1000WMetal Halide (MH) 400, 1000WHigh Pressure Sodium (HP) 400, 600, 750, 1000W


MCHIGH MAST INDUSTRIALAREA LUMINAIRE


I N D U S T R I A LA R E A L U M I N A I R E


OU

TD

OO

R A

RE

A / S

ITE

COOPER LIGHTING 94



• Die-cast aluminum housing and cover. Standard bronze polyesterpowder coat finish. Otherfinish colors available

• Clamp type internal slipfitter for 2 3/8" O.D.pipe

• Anodized spun aluminumreflector housing

• Die-cast aluminum doorwith tempered convexglass lens, silicone rubbergasket and hinged andlatched door assembly for easy maintenance



The MX high mast area luminaire is ideal for use on areasrequiring maximum spacing, suchas areas below tall industrial mezzanines and interstate highways.

2 3/8"[61mm]

O.D. Pipe23 3/4"

[503mm]

19 3/8"[492mm]

4 3/8"[111mm]

28" [711mm]

Vertical Lamp Configuration

NOTES: 1 Standard color is bronze, other finish colors available. Consult your Cooper Lighting Representative. 2 Products also available in non-US voltages and50Hz for international markets. 3 88% efficient EISA complaint MP fixtures not available in 347V and Triple-tap voltages. 4 Add suffix in the order shown. 5 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as aseparate line item. 6 Order separately. 7 400W MH available in non-US markets only. 5T available in 400W MH only. 8 Specifications and dimensions subjectto change without notice.

E P A - E f f e c t e d P r o j e c t e d A r e a : 1 . 4 6


SAMPLE NUMBER: MPMX-3-D-1000-120V



SodiumMH=Metal Halide

Series 1

MX=HighMast

OpticsO=Flat GlassD=Convex GlassN=Open

DistributionM=Type V MediumS=Type V ShortW=Type V Wide

Lamp WattageMP400=400W450=450W1000=1000WMH 7

400=400W1000=1000WHP400=400W600=600W750=750W1000=1000W

Voltage 2

120V208V240V277V480V347V 3

MT=Multi-Tapwired 277V

TT=Triple-Tapwired 347V 3

5T=5-Tapwired 277V 5

Options 4



LL=Lamp Included 5

MOV=Lighting SurgeProtector

FILT=Four-Stage Air Filter(Sintered bronze filterprevents the entranceof contaminants)

PER=NEMA TwistlockPhotocontrolReceptacle


ColorsWH=WhiteBK=BlackAP=Grey

Accessories 6

OA1153=External CutoffShield (.90 EPA)

OA/RA1016=PhotoelectricControl, 105-285 VoltNEMA Type

OA/RA1027=PhotoelectricControl, 480Volt NEMAType


Lamp Type WattagePulse Start Metal Halide (MP) 400, 450, 1000WMetal Halide (MH) 400, 1000WHigh Pressure Sodium (HP) 400, 600, 750, 1000W


MXHIGH MAST

INDUSTRIALAREA

LUMINAIRE



I N D U S T R I A LA R E A L U M I N A I R E

MO

TIO

N A

CT

IVA

TE

D

COOPER LIGHTING95



The Lumark MS245R is the idealsecurity lighting for any commercial or residential application. Durable die-cast aluminum lampholders and mounting plate for extra long life.Night time ON setting allows light tocome on automatically at dusk. 240°infrared sensor with extra wide design for maximum coverage.Lights can be turned on manuallyand reset at dawn. U.L. listed andCSA certified for wet locations.


The Lumark MS35 and MS37 areideal security lights for any residential motion activated lighting application. Lights can beused as standard floodlights. Highimpact weatherproof non-metallicconstruction. Infrared motion sensor with 110° coverage up to 70 feet. Adjustable time and sensitivity settings for precise control (no tools required). U.L.listed and CSA certified for wet locations.


The Retrofit Lumark MS240 provides long range light controlup to 70' and 240° degrees ofcoverage. Finished in bronze orbright white. Adjustable 4-12 minutetime delay. Handles up to 300W ofswitching capacity. Motion sensorturns lights on automatically whenmotion is detected and off after apreselected time delay (4 or 12minutes). Night time-on setting allows lights to come on automatically at dusk (3 time settings). Lights can be turned on manually and reset at dawn

• 240° coverage fullyadjustable down to 180° forexacting coverage pattern

• Adjustable 4-12 minutetime delay

• Handles up to 300W of switching capacity

• Motion sensor turns lightson automatically when motion is detected and offafter a preselected timedelay (4 or 12 minutes).Nighttime-on setting

allows lights to come on automatically at dusk (3time settings). Lights can be turned on manually andreset at dawn

• Finished in bronze or brightwhite

S P E C I F I C A T I O N F E A T U R E S


Shipping PackageCatalog Switching Master Net Volume DimensionsNumber Capacity Voltage Color Pack Weight (cu. ft.) (D x W x L)MS240 300W 120V Bronze 4 .56 lbs (0.2kg) 0.03 6" x 3 3/8" x 2 7/8"MS240W 300W 120V White 4 .56 lbs (0.2kg) 0.03 6" x 3 3/8" x 2 7/8"


Shipping PackageCatalog Lamp Master Net Volume DimensionsNumber Type Voltage Color Pack Weight (cu. ft.) (D x W x L)MS245R (2) 150W PAR38 Incandescent 120V Bronze 2 2.3 lbs (1.0 kg) 0.21 11 1/4" x 6 1/16" x 4 15/16"MS245RW (2) 150W PAR38 Incandescent 120V White 2 2.3 lbs (1.0 kg) 0.21 11 1/4" x 6 1/16" x 4 15/16"

• Maximum (2)150W PAR 38incandescent lamps. Lampsnot included

• Durable high-impact non-metallic construction isweather resistant

• Wall or eaves mount

• Convenient toolless lamp and sensor head adjustment with adjustabletime and sensitivity settings. Detects motion at 110° and up to 70'. 23motion detection zones


• Durable metal lamp covers add a decorative look andhelp protect lamps from outside elements

• Durable die-cast aluminumlampholders and mountingplate for extra long life

• Large adjustment knobs foreasy setup

• Wall or eaves mount

• Motion sensor turns lightson automatically when motion is detected and off after a preselected timedelay (4 or 12 minutes)Night time-on setting allows lights to come on automatically at dusk (3 time settings). Lights canbe turned on manually andreset at dawn. Photocell design prevents lights fromturning on during daylighthours. Power outage protection resets at dawn

• Maximum (2)150W PAR 38incandescent lamps. Lampsnot included



Master Master Unit MasterCatalog Lamp Lamp Net Wt. Carton Wt. CubeNumber Type Wattage Voltage Color (lbs.)—Kg Qty. (lbs.)—Kg (lbs.)—KgMS35 Incandescent (2) 150 120V-127V Bronze (1.12)—0.51 2 0.56—0.26 0.24—0.07MS37 Incandescent (2) 150 120V-127V White (1.12)—0.51 2 0.56—0.26 0.24—0.07

NOTES: 1 Products also available in non-US voltages and frequencies for international markets. 2 Consult your Cooper Lighting Representative for availability andordering information. 3 Specifications and dimensions subject to change without notice.

MS254R,MS245RW,MS35, MS37MS240

(2) 150WIncandescent

W A T C H G U A R D M O T I O NA C T I V A T E D F L O O D L I G H T SA N D R E T R O F I T M O T I O NS E N S O R S

WO

RK

LIG

HT

S

COOPER LIGHTING 96


• U.L. listed and CSA certified


• Heavy-duty, formed steelhousing with an open air ballast for cooler operation is finished in a white polyester paint

• High power factor ballastwith class H insulation.U.L. listed for 65°C (149°F)ambient temperature operation. Minimum starting temperature is -40°C (-40° F) for HP and -30°C (-20° F) for MH. CSA certified


• Durable formed and welded steel wire coatedwith a safety yellow polyester paint for easyvisibility and safety

• Great replacement for temporary string lightingwhere mounting heightsexceed 15'



The Steeler Worklight combines adurable cold-rolled steel housingand a construction wire guard tohelp protect the lamp at any construction site. U.L. listed and labeled for damp location. CSACertified.

NOTES: 1 Products also available in non-US voltages and frequencies for international markets. 2 88% efficient EISA compliant MP fixtures not available in 5-Tapvoltages. 3 Add as suffix in order shown. 4 Order separately. 5 Specifications and dimensions subject to change without notice.

23 1/4"[591mm]

11 1/4" [286mm]

7"[178mm]


SAMPLE NUMBER: MHSS-CW-400-MT

NOTES: Options not available with stock products. Order Accessories as separate items for field installation. Refer to standard ordering information to add options and accessories.

Lamp TypeMP=Pulse

StartMetalHalide

MH=MetalHalide

SeriesSS=Steeler

Reflector TypeCW=Worklight

LampWattage320=320W350=350W400=400W

Voltage 1

MT=Multi-Tap5T=5-Tap 2

S T O C K S A M P L E S A M P L E ( C o a t e d L a m p I n c l u d e d )

SAMPLE NUMBER: MHCW40

Lamp TypeMP=Pulse

StartMetalHalide

MH=MetalHalide

SeriesCW=Steeler

Worklight


Options (Factory Installed)PC3=3' cord with NEMA plug (120V-L5-15P) threaded through SHK wired 120VC3=3' cord (120V-L5-15P) threaded through SHK wired 120V OR=Open Rated Socket

-

D I M E N S I O N S

Option 3

LL=Coated Lamp IncludedOR=Open Rated Socket for Metal Halide

LampsFH-1=Die-cast Aluminum Fixture Hook

(with 3/4" threads for easy installation)FL-1=Malleable Iron Plated Fixture Loop

(with 3/4" threads for easy installation)SHK=Die-cast Aluminum Fixture Hook

(with safety screw and 3/4" threads foreasy installation)

C3=3' Cord–No Plug (Must use with FH-1,FL-1, or SHK)

PC3-XXXV=3' Cord with NEMA Plug (120V-L5-15P, 208V-L6-15P, 347V-L37-20P, and 480V-L8-20P). Othercord lengths are available byspecifying length (PC6 for 6'Cord). Requires FH-1 or FL-1, orSHK. Example: PC3-120V. Usewith TPPH-NEMA.

PHC=Power Cord and Plug (18" Power Cordand Non-NEMA plug configuration.Must be used with FL-1 and TPPH(Thru-Way Pendant Power Hook).Must specify single voltage.

Accessories 4

C3=3' Cord–No Plug–Requires FH-1, FL-1, or SHK

PC3-XXXV=3' Cord for with NEMAPlugs (120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 277V-L7-15P, 347V-L37-20P and480V-L8-20P). OtherLengths Available. Requires FH-1 or FL-1, orSHK. Use with TPPH-NEMA. Specify Voltage.

PHC=Power Cord and Plug (18" cord, non-NEMA plug requires FL-1 and TPPH).

FH-1=Fixture HookFL-1=Fixture LoopSHK=Hook with Safety ScrewLL=Coated Lamp Included

SSSTEELER

WORKLIGHT

320-400WPulse Start Metal Halide

Metal Halide

C O N S T R U C T I O NL U M I N A I R E

Lamp Type WattagePulse Start Metal Halide (MP) 320, 350, 400WMetal Halide (MH) 400W

Voltage ChartMT=Multi-Tap 120/208/240/277V (wired 277V)5T=5-Tap 120/208/240/277/480V (wired 480V)

WO

RK

LIG

HT

S

COOPER LIGHTING97


• Maximum (1) 300W PAR38 incandescent lamp or(1) 40W Compact Fluorescent lamp

• Strong durable high impact composite material also available in polished chrome

• Available in single anddouble wall mount andceiling mount configurations

• Finish on the arm issafety yellow polyesterpowder coat. Struts and brackets are blackzinc. Composite lampheads are black. Polycarbonate lampheads are yellow andfluorescent lamp headsare polished chrome


SD/DD/IRDOCKLIGHT


The Lumark Docklight is ideal forilluminating the interior of tractortrailers during loading or unloading. The arms and strutsare constructed of 1 1/2" crosssection 12-gauge steel tubing.Arms and strut ends are providedwith injection-molded end caps.Electrical cord is secured and allows for easy adjustment.


S A M P L E N U M B E R : I N D D 4 0 - 3 0 R - 3 0 0 - W L G - 1 2 0 V

40WC o m p a c t F l u o r e s c e n t

200-300WI n c a n d e s c e n t

W A L L O R C E I L I N GM O U N T E D D O C K L I G H T

Lamp TypeIN=Incandescent

Arm Length24=24"30=30" 1

40=43"60=63"90=90"

Lamp Wattage200=200W

(Incandescent)300=300W

(Incandescent)

Lamp GuardWLG=Wire Lamp

GuardCLG=Composite

Lamp Guard

Voltage120V=120V

Options 2

__=Yellow (StandardColor Finish)

LA=Locking ArmAA=Spring Arm

Accessories 3

FAN=18" 3-Speed Fan

Lamp Head30R=Composite

Head (300WIncandescentMax.)

20P=PolycarbonateHead (200WIncandescentMax.)

SeriesSD=Single Wall

Arm DocklightDD=Double Wall

Arm DocklightIR=Ceiling Mount

Docklight

NOTES: 1 Available with IR only. 2 Add as suffix in the order shown. 3 Order separately. 4 Specifications and dimensions subject to change without notice.

Single Wall Mount (SD)

Overall Length 46 1/2" to 65"

Double Wall Mount (SD)

Overall Length 43" to 87 1/2"

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 98

COOPER LIGHTING - LUMARKProbe Start Pulse StartMetal Halide (MH) Metal Halide (MP) EISA

Product Cat Logic Prefix String Cross Reference CompliantAIM/AIL Avid Series AIM-250-MH AIM-250-MPp. 7 & 8 AIL-250-MH AIL-250-MP

AIL-320-MH AIL-320-MPAIL-350-MH AIL-350-MPAIL-400-MH AIL-400-MP

SS Steeler MHSS-SA 150 MPSS-SA 175p. 9 MHSS-SA 175 MPSS-SA 175

MHSS-SA 250 MPSS-SA 250MPSS-SA 320MPSS-SA 350

MHSS-SA 400 MPSS-SA 400MPSS-SA 450

MHSS-SA-40 MPSS32MPSS35MPSS40

HB Benchmark MHHB-SA 150 MPHB-SA 175p. 10 MHHB-SA 175 MPHB-SA 175

MHHB-SA 250 MPHB-SA 250MPHB-SA 320MPHB-SA 350

MHHB-SA 400 MPHB-SA 400MPHB-SA 450

SE E&G Steeler MHSE-ENSA 150 MPSE-ENSA 175p. 11 MHSE-ENSA 175 MPSE-ENSA 175

MHSE-ENSA 250 MPSE-ENSA 250MPSE-ENSA 320MPSE-ENSA 350

MHSE-ENSA 400 MPSE-ENSA 400MPSE-ENSA 450

EB E&G Benchmark MHEB-ENSA 150 MPEB-ENSA 175p. 12 MHEB-ENSA 175 MPEB-ENSA 175

MHEB-ENSA 250 MPEB-ENSA 250MPEB-ENSA 320MPEB-ENSA 350

MHEB-ENSA 400 MPEB-ENSA 400MPEB-ENSA 450

UB Benchmark Uplight MHUB-ENSA 150 MPUB-ENSA 175p. 13 MHUB-ENSA 175 MPUB-ENSA 175

MHUB-ENSA 250 MPUB-ENSA 250MPUB-ENSA 320MPUB-ENSA 350

MHUB-ENSA 400 MPUB-ENSA 400MPUB-ENSA 450

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING99


Product Cat Logic Prefix String Cross Reference CompliantSS Econoliter MHSS-EL 150 MPSS-EL 175p. 14 MHSS-EL 175 MPSS-EL 175

MHSS-EL 250 MPSS-EL 250MPSS-EL 320MPSS-EL 350

MHSS-EL 400 MPSS-EL 400MPSS-EL 450

SS VertX MHSS-AV 150 MPSS-AV 175p. 15 MHSS-AV 175 MPSS-AV 175

MHSS-AV 250 MPSS-AV 250MPSS-AV 320MPSS-AV 350

MHSS-AV 400 MPSS-AV 400MPSS-AV 450

HB VertX MHHB-AV 150 MPHB-AV 175p. 16 MHHB-AV 175 MPHB-AV 175

MHHB-AV 250 MPHB-AV 250MPHB-AV 320MPHB-AV 350

MHHB-AV 400 MPHB-AV 400MPHB-AV 450

SE E&G VertX MHSE-ENAV 150 MPSE-ENAV 175p. 17 MHSE-ENAV 175 MPSE-ENAV 175

MHSE-ENAV 250 MPSE-ENAV 250MPSE-ENAV 320MPSE-ENAV 350

MHSE-ENAV 400 MPSE-ENAV 400MPSE-ENAV 450

EB E&G VertX MHEB-ENAV 150 MPEB-ENAV 175p. 18 MHEB-ENAV 175 MPEB-ENAV 175

MHEB-ENAV 250 MPEB-ENAV 250MPEB-ENAV 320MPEB-ENAV 350

MHEB-ENAV 400 MPEB-ENAV 400MPEB-ENAV 450

EP Enterprise MHEP 150 MPEP 175p. 19 MHEP 175 MPEP 175

MHEP 250 MPEP 250MPEP 320MPEP 350

MHEP 400 MPEP 400MPEP 450

FM25 FP25FP32

FM40 FP40

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 100


Product Cat Logic Prefix String Cross Reference CompliantRB Benchmark Low-Bay MHRB 150 MPRB 175p. 20 MHRB 175 MPRB 175

MHRB 250 MPRB 250MPRB 320MPRB 350

MHRB 400 MPRB 400MPRB 450

VF Vertimark MHVF-AL 150 MPVF-AL 175p. 21 MHVF-AL 175 MPVF-AL 175

MHVF-AL 250 MPVF-AL 250MPVF-AL 320MPVF-AL 350

MHVF-AL 400 MPVF-AL 400

BE Vertimark II MHBE 150 MPBE 175p. 22 MHBE 175 MPBE 175

MHBE 250 MPBE 250

SG Glass Steeler MHSG-GR 150 MPSG-GR 175p. 23 MHSG-GR 175 MPSG-GR 175

MHSG-GR 250 MPSG-GR 250MPSG-GR 320MPSG-GR 350

MHSG-GR 400 MPSG-GR 400MPSG-GR 450

GB Glass Benchmark MHGB-GR 150 MPGB-GR 175p. 24 MHGB-GR 175 MPGB-GR 175

MHGB-GR 250 MPGB-GR 250MPGB-GR 320MPGB-GR 350

MHGB-GR 400 MPGB-GR 400MPGB-GR 450

SE E&G Glass Steeler MHSE-ENGR 150 MPSE-ENGR 175p. 25 MHSE-ENGR 175 MPSE-ENGR 175

MHSE-ENGR 250 MPSE-ENGR 250MPSE-ENGR 320MPSE-ENGR 350

MHSE-ENGR 400 MPSE-ENGR 400MPSE-ENGR 450

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING101


Product Cat Logic Prefix String Cross Reference CompliantEB E&G Glass Benchmark MHEB-ENGR 150 MPEB-ENGR 175p. 26 MHEB-ENGR 175 MPEB-ENGR 175

MHEB-ENGR 250 MPEB-ENGR 250MPEB-ENGR 320MPEB-ENGR 350

MHEB-ENGR 400 MPEB-ENGR 400MPEB-ENGR 450

SS Prismatic High-Bay MHSS-PD 150 MPSS-PD 175p. 27 MHSS-PD 175 MPSS-PD 175

MHSS-PD 250 MPSS-PD 250MPSS-PD 320MPSS-PD 350

MHSS-PD 400 MPSS-PD 400MPSS-PD 450

HB Prismatic Benchmark MHHB-PD 150 MPHB-PD 175p. 28 MHHB-PD 175 MPHB-PD 175

MHHB-PD 250 MPHB-PD 250MPHB-PD 320MPHB-PD 350

MHHB-PD 400 MPHB-PD 400MPHB-PD 450

SE E&G Prismatic Acrylic MHSE-ENPD 150 MPSE-ENPD 175Steeler MHSE-ENPD 175 MPSE-ENPD 175p. 29 MHSE-ENPD 250 MPSE-ENPD 250

MPSE-ENPD 320MPSE-ENPD 350

MHSE-ENPD 400 MPSE-ENPD 400MPSE-ENPD 450

EB E&G Prismatic Acrylic MHEB-ENPD 150 MPEB-ENPD 175Benchmark MHEB-ENPD 175 MPEB-ENPD 175p. 30 MHEB-ENPD 250 MPEB-ENPD 250

MPEB-ENPD 320MPEB-ENPD 350

MHEB-ENPD 400 MPEB-ENPD 400MPEB-ENPD 450

SS Enhanced Refractor MHSS-ER 150 MPSS-ER 175High-Bay Steeler MHSS-ER 175 MPSS-ER 175p. 31 MHSS-ER 250 MPSS-ER 250

MPSS-ER 320MPSS-ER 350

MHSS-ER 400 MPSS-ER 400MPSS-ER 450

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 102


Product Cat Logic Prefix String Cross Reference CompliantHB Enhanced Refractor MHHB-ER 150 MPHB-ER 175High-Bay Benchmark MHHB-ER 175 MPHB-ER 175p. 32 MHHB-ER 250 MPHB-ER 250

MPHB-ER 320MPHB-ER 350

MHHB-ER 400 MPHB-ER 400MPHB-ER 450

LX Prismatic Direct-Mount MHLX 150 MPLX 175Steeler MHLX 175 MPLX 175p. 33 MHLX 250 MPLX 250

MPLX 320MPLX 350

MHLX 400 MPLX 400

XB Prismatic Direct-Mount MHXB 150 MPXB 175Benchmark MHXB 175 MPXB 175p. 34 MHXB 250 MPXB 250

MPXB 320MPXB 350

MHXB 400 MPXB 400

VL Large Vaportight MHVL 150 MPVL 175p. 38 MHVL 175 MPVL 175

QC Quadra-Mark MHQC 175 MPQC 175p. 47 MHQC 250 MPQC 250

MPQC 320MPQC 350

MHQC 400 MPQC 400

QP Quadra-Lume MHQP 175 MPQP 175p. 48 MHQP 250 MPQP 250

MPQP 320MPQP 350

MHQP 400 MPQP 400

Probe Start Pulse StartMetal Halide (MH) Metal Halide (MP) EISA

Product Cat Logic Prefix String Cross Reference CompliantQF Quadra-Lume MHQF 175 MPQF 175w/ Flat Lens MHQF 250 MPQF 250p. 49 MPQF 320

MPQF 350MHQF 400 MPQF 400

QD Quadra-Lume MHQD 175 MPQD 175w/ Drop Lens MHQD 250 MPQD 250p. 50 MPQD 320

MPQD 350MHQD 400 MPQD 400

CL/CS Canopy Light MHCL 100 MPCL 100p. 51 MHCL 150 MPCL 150

MHCL 175 MPCL 150MPCL 200

MHCL 250 MPCL 250MPCL 320MPCL 350

MHCL 400 MPCL 400MHCS 150 MPCS 150MHCS 175 MPCS 150

MPCS 200MHCS 250 MPCS 250

MPCS 320MPCS 350

MHCS 400 MPCS 400

PR Parker MHPR 70 MPPR 70p. 52 MHPR 100 MPPR 100

MHPR 150 MPPR 150MHPR 175 MPPR 150

PD Park-King MHPD 50 MPPD 50p. 53 MHPD 70 MPPD 70

MHPD 100 MPPD 100MHPD 150 MPPD 150MHPD 175 MPPD 150

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING103


EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 104


Product Cat Logic Prefix String Cross Reference CompliantSF Falcon MHSF 50 MPSF 50p. 55 MHSF 70 MPSF 70

MHSF 100 MPSF 100MHSF 150 MPSF 150MHSF 175 MPSF 150MHSF50 MPSF50MHSF70 MPSF70MHSF10 MPSF10MHSF17 MPSF15

XF Falcon MHXF25 MPXF25p. 56 MPXF32

MPXF35MHXF40 MPXF40

MS Impact Flood Small MHMS 50 MPMS50p. 57 MHMS 70 MPMS70

MHMS 10 MPMS100MHMS 150 MPMS150MHMS 175 MPMS150MHMS70 MPMS70MHMS10 MPMS10MHMS17 MPMS15

MM Impact Flood Medium MHMM 150 MPMM 150p. 58 MHMM 175 MPMM 150

MPMM 200MHMM 250 MPMM 250

MPMM 320MHMM 400 MPMM 400MHMM25 MPMM25

MPMM32MHMM40 MPMM40

WR Warrior MHWR 100 MPWR 100p. 59 MHWR 150 MPWR 150

MHWR 175 MPWR 150MPWR 200

MHWR 250 MPWR 250MPWR 320MPWR 350

MHWR 400 MPWR 400XM17 XP15XM25 XP25

XP32XM40 XP40WM17 WP15WM25 WP25

WP32WM40 WP40

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING105


Product Cat Logic Prefix String Cross Reference CompliantNK Nighthawk III MHNK 150 MPNK 150p. 60 MHNK 175 MPNK 150

MHNK 250 MPNK 250MPNK 320

MHNK 400 MPNK 400MHNK 25 MPNK 25

MPNK 32MHNK 40 MPNK 40

LP Low-Profile Floodlight MHLP 250 MPLP 250p. 61 MPLP 320

MPLP 350MHLP 400 MPLP 400

IP Impact Wedge MHIP-W 50 MPIP-W 50p. 66 MHIP-W 70 MPIP-W 70

MHIP-W 100 MPIP-W 100MHIP-W 150 MPIP-W 150MHIP-W 175 MPIP-W 150

IP Impact Trapezoid MHIP-T 50 MPIP-T 50p. 67 MHIP-T 70 MPIP-T 70

MHIP-T 100 MPIP-T 100MHIP-T 150 MPIP-T 150MHIP-T 175 MPIP-T 150

IPTM Impact Trapezoid Medium MHIP-TM 150 MPIP-TM 150p. 68 MHIP-TM 175 MPIP-TM 150

MPIP-TM 200MHIP-TM 250 MPIP-TM 250

MPIP-TM 320MPIP-TM 350

MHIP-TM 400 MPIP-TM 400MHIPITM25 MPIPITM25

MPIPITM32MHIPITM40 MPIPITM40

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 106


Product Cat Logic Prefix String Cross Reference CompliantIP Impact Cylinder MHIP-C 50 MPIP-C 50p. 69 MHIP-C 70 MPIP-C 70

MHIP-C 100 MPIP-C 100MHIP-C 150 MPIP-C 150MHIP-C 175 MPIP-C 150

IPCM Impact Cylinder Medium MHIP-CM 150 MPIP-CM 150p. 70 MHIP-CM 175 MPIP-CM 150

MPIP-CM 200MHIP-CM 250 MPIP-CM 250

MPIP-CM 320MPIP-CM 350

MHIP-CM 400 MPIP-CM 400MHIPICM25 MPIPICM25

MPIPICM32MHIPICM40 MPIPICM40

IP Impact Quarter Sphere MHIP-S 50 MPIP-S 50p. 71 MHIP-S 70 MPIP-S 70

MHIP-S 100 MPIP-S 100MHIP-S 150 MPIP-S 150MHIP-S 175 MPIP-S 150

WL Wal-Pak MHWL 50 MPWL 50p. 72 MHWL 70 MPWL 70

MHWL 100 MPWL 100MHWL 150 MPWL 150MHWL 175 MPWL 150

MPWL 200MHWL 250 MPWL 250

MPWL 320MPWL 350

MHWL 400 MPWL 400MHPL 150 MPPL 150MHPL 175 MPPL 150

MPPL 200MHPL 250 MPPL 250

MPPL 320MPPL 350

MHPL 400 MPPL 400MHWE 150 MPWE 150MHWE 175 MPWE 150

MPWE 200MHWE 250 MPWE 250

MPWE 320MPWE 350

MHWE 400 MPWE 400PM17 PM15PM25 PM25

PM32PM40 PM40

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING107


Product Cat Logic Prefix String Cross Reference CompliantMN Mon-2 MHMN 50 MPMN 50p. 73 MHMN 70 MPMN 70

MHMN 100 MPMN 100

M4 Mon-4 MHM4 70 MPM4 70p. 74 MHM4 100 MPM4 100

MHM4 150 MPM4 150MHM4 175 MPM4 150

MPM4 200MHM4 250 MPM4 250

MPM4 320MPM4 350

MHM4 400 MPM4 400

WM Wal-Lite MHWM50G MPWM50Gp. 75 MHWM70G MPWM70G

MHWM10G MPWM10G

WP Wal-Eye MHWP 70 MPWP 70p. 77 MHWP 100 MPWP 100

MHWP 150 MPWP 150MHWP 175 MPWP 150MHWC 150 MPWC 150MHWC 175 MPWC 150

GP Glass-Pak MHGP 50 MPGP 50p. 78 MHGP 70 MPGP 70

MHGP 100 MPGP 100MHGP 150 MPGP 150MHGP 175 MPGP 150

GS Super Smokey MHGS 50 MPGS 50p. 79 MHGS 70 MPGP 70

MHGS 100 MPGS 100MHGS 150 MPGS 150MHGS 175 MPGS 150

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 108


Product Cat Logic Prefix String Cross Reference CompliantVR Smokey MHVR 50 MPVR 50p. 80 MHVR 70 MPVR 70

MHVR 100 MPVR 100

MP Micro-Pak MHMP 50 MPMP 50p. 81 MHMP 70 MPMP 70

MHMP 100 MPMP 100

Wally Cutoff LM70C LP70Cp. 82 LM10C LP10C

Wally LM70G LP70Gp. 82 LM10G LP10G

Z-Pak Cutoff MHFZ17C MPFZ15Cp. 83

Z-Pak MHFZ17 MPFZ15p. 83

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING109


Product Cat Logic Prefix String Cross Reference CompliantEL Eternalume MHEL10 MPEL10p. 85 MHEL70 MPEL70

TR Tribute MHTR 70 MPTR 70p. 86 MHTR 100 MPTR 100

MHTR 150 MPTR 150MHTR 175 MPTR 150

MPTR 200MHTR 250 MPTR 250

MPTR 320MPTR 350

MHTR 400 MPTR 400MHTR2317 MPTR2315MHTR2325 MPTR2325

MPTR2332MHTR2340 MPTR2340

PFT Tribute and Pole Combo PFT_17_M PFT_15_Pp. 87-88 PFT_25_M PFT_25_P

PFT_32_PPFT_40_M PFT_40_P

RY Roadway Cobrahead MHRY 50 MPRY 50p. 89 MHRY 70 MPRY 70

MHRY 100 MPRY 100MHRY 150 MPRY 150MHRY 175 MPRY 150

MPRY 200MHRY 250 MPRY 250

MPRY 320MPRY 350

MHRY 400 MPRY 400

RS Roadway Small MHRS 50 MPRS 50Cobrahead MHRS 70 MPRS 70p. 90 MHRS 100 MPRS 100

MHRS 150 MPRS 150MHRS 175 MPRS 150

MPRS 200MHRS 250 MPRS 250

EIS

A C

OM

PLIA

NT

PR

OB

E-P

ULS

E S

TA

RT

ME

TA

L H

ALID

E L

AM

P C

RO

SS

RE

FE

RE

NC

E

COOPER LIGHTING 110


Product Cat Logic Prefix String Cross Reference CompliantRL Roadway Large MHRL 150 MPRL 150Cutoff Cobrahead MHRL 175 MPRL 150p. 91 MPRL 200

MHRL 250 MPRL 250MPRL 320MPRL 350

MHRL 400 MPRL 400

RC Roadway Small MHRC 50 MPRC 50Cutoff Cobrahead MHRC 70 MPRC 70p. 92 MHRC 100 MPRC 100

MHRC 150 MPRC 150MHRC 175 MPRC 150

MPRC 200MHRC 250 MPRC 250

MC High Mast MHMC 400 MPMC 400p. 93

MX High Mast MHMX 400 MPMX 400p. 94 MPMX 450

SS Steeler Worklight MPSS-CW 320p. 96 MPSS-CW 350

MPSS-CW 400MHCW40 MPCW32

MPCW40

IND

EX

COOPER LIGHTING111


PRODUCT NO PAGE NO. PRODUCT NO PAGE NO. PRODUCT NO PAGE NO. PRODUCT NO PAGE NO.

AII 5

AIL 8

AIM 7

AIS 6

BS10 80

BS50 80

BS70 80

CFDP-PC22 35

CFDP-SC22 35

CFFZ15 83

CFFZ15C 83

CFIP-C 69

CFIP-CM 70

CFIP-S 71

CFIP-T 67

CFIP-TM 68

CFIP-W 66

CFMM 58

CFMP 81

CFMS 57

CFMS 57

CFSF 55

CFSF-K-42 55

CFVR 80

CFWM42 75

CML-120/277V 39

CML-208V 39

CML-240V 39

CML-347V 39

CML-480V 39

FM25 19

FM258 19

FM258-NL 19

FM25-NL 19

FM32 19

FM32-NL 19

FM35 19

FM35-NL 19

FM40 19

FM408 19

FM408-NL 19

FM40-NL 19

FM40Q 19

FM40Q-NL 19

FP25 19

FP258 19

FP258-NL 19

FP25-NL 19

FP32 19

FP32-NL 19

FP35 19

FP35-NL 19

FP40 19

FP408 19

FP408-NL 19

FP40-NL 19

FP40Q 19

FP40Q-NL 19

FS25 19

FS258 19

FS258-NL 19

FS25-NL 19

FS32 19

FS32-NL 19

FS35 19

FS35-NL 19

FS40 19

FS408 19

FS408-NL 19

FS40-NL 19

FS40Q 19

FS40Q-NL 19

HPBE-2A 22

HPBE-2P 22

HPBE-5A 22

HPBE-5P 22

HPCL 51

HPCS 51

HPEB-ENAV19 18

HPEB-ENGR16 26

HPEB-ENGR21 26

HPEB-ENPD22 30

HPEB-ENSA18 12

HPEB-ENSA23 12

HPEL10 85

HPEL15 85

HPEL70 85

HPEP-R22 19

HPEP-R28 19

HPFZ15 83

HPFZ15C 83

HPGB-GR16 24

HPGB-GR21 24

HPGP 78

HPGS 79

HPHB-AV19 16

HPHB-ER22 32

HPHB-PD16 28

HPHB-PD22 28

HPHB-PD25 28

HPHB-SA15 10

HPHB-SA18 10

HPHB-SA23 10

HPIC10 69

HPIC15 69

HPIP-C 69

HPIP-CM 70

HPIP-S 71

HPIP-T 67

HPIP-TM 68

HPIP-W 66

HPIS10 71

HPIS15 71

HPIT10 67

HPIT15 67

HPIW10 66

HPIW15 66

HPLP 61

HPLX-DB22 33

HPLX-DB25 33

HPLX-PD22 33

HPLX-PD25 33

HPM4 74

HPMC 93

HPMM 58

HPMN 73

HPMN15 73

HPMN70 73

HPMP 81

HPMX 94

HPNK 60

HPPD 53

HPPL 72

HPPR 52

HPQD 50

HPQF 49

HPQP 48

HPRB-RA22 20

HPRB-RA28 20

HPRB-RA28PL 20

HPRB-RP22 20

HPRB-RP28 20

HPRB-RP28PL 20

HPRC 92

HPRL 91

HPRS 90

HPRY 89

HPSE-ENAV19 17

HPSE-ENGR16 25

HPSE-ENGR21 25

HPSE-ENPD22 29

HPSE-ENSA18 11

HPSE-ENSA23 11

HPSF 55

HPSF35K 55

HPSF35T 55

HPSG-GR16 23

HPSG-GR21 23

HPSS-25 9

HPSS-32 9

HPSS-40 9

HPSS-408 9

HPSS-40Q 9

HPSS-AV19 15

HPSS-EL18 14

HPSS-ER22 31

HPSS-PD16 27

HPSS-PD22 27

HPSS-PD25 27

HPSS-SA15 9

HPSS-SA18 9

HPSS-SA23 9

HPTR 86

HPTR2315 86

HPTR2325 86

HPTR2340 86

HPUB-ENSA18 13

HPVF-AL 21

HPVL-C 38

HPVR 80

HPVS-C 37

HPVS-W 37

HPWC 77

HPWE 72

HPWL 72

HPWM35 75

HPWM50 75

HPWM70 75

HPWP 77

HPWR 59

HPXB-DB22 34

HPXB-DB25 34

HPXB-PD22 34

HPXB-PD25 34

HPXF25T 56

HPXF25T 56

HPXL 58

ICVC1G 36

ICVC2G 36

ICVP1G 36

ICVP2G 36

ICVW1G 36

ICVW2G 36

INDD 97

INIR 97

INSD 97

INVL-C 38

INVS-C 37

IND

EX

COOPER LIGHTING 112



INVS-W 37

IRMD-A-24V 40

IRMD-N-24V 40

IRMD-W-24V 40

IRMS 41

LC42C 82

LC42G 82

LP10C 82

LP10G 82

LP70C 82

LP70G 82

LQL1500 54

LS10C 82

LS10G 82

LS15C 82

LS15G 82

LS50C 82

LS50G 82

LS70C 82

LS70G 82

MHAS 63

MHBE-2A 22

MHBE-2P 22

MHBE-5A 22

MHBE-5P 22

MHCL 51

MHCS 51

MHCW40 96

MHEB-ENAV19 18

MHEB-ENGR16 26

MHEB-ENGR21 26

MHEB-ENPD22 30

MHEB-ENSA18 12

MHEB-ENSA23 12

MHEP-R22 19

MHEP-R28 19

MHGB-GR16 24

MHGB-GR21 24

MHGP 78

MHGS 79

MHHB-AV19 16

MHHB-ER22 32

MHHB-PD16 28

MHHB-PD22 28

MHHB-PD25 28

MHHB-SA15 10

MHHB-SA18 10

MHHB-SA23 10

MHIP-C 69

MHIP-CM 70

MHIP-S 71

MHIP-T 67

MHIP-TM 68

MHIP-W 66

MHLP 61

MHLX-DB22 33

MHLX-DB25 33

MHLX-PD22 33

MHLX-PD25 33

MHM4 74

MHMC 93

MHMM 58

MHMS 57

MHMX 94

MHNK 60

MHNKS1K 60

MHNKS25 60

MHNKS40 60

MHPD 53

MHPL 72

MHPR 52

MHQC 47

MHQD 50

MHQF 49

MHQP 48

MHRB-RA22 20

MHRB-RA28 20

MHRB-RA28PL 20

MHRB-RP22 20

MHRB-RP28 20

MHRB-RP28PL 20

MHRC 92

MHRL 91

MHRS 90

MHRY 89

MHSE-ENAV19 17

MHSE-ENGR16 25

MHSE-ENGR21 25

MHSE-ENPD22 29

MHSE-ENSA18 11

MHSE-ENSA23 11

MHSF 55

MHSF10K 55

MHSF10T 55

MHSF15K 55

MHSF15T 55

MHSF50K 55

MHSF50T 55

MHSF70K 55

MHSF70T 55

MHSG-GR16 23

MHSG-GR21 23

MHSS-25 9

MHSS-32 9

MHSS-40 9

MHSS-408 9

MHSS-40Q 9

MHSS-AV19 15

MHSS-CW 96

MHSS-EL18 14

MHSS-ER22 31

MHSS-PD16 27

MHSS-PD22 27

MHSS-PD25 27

MHSS-SA15 9

MHSS-SA18 9

MHSS-SA23 9

MHTR 86

MHUB-ENSA18 13

MHVF-AL 21

MHWC 77

MHWE 72

MHWL 72

MHWP 77

MHWR 59

MHXB-DB22 34

MHXB-DB25 34

MHXB-PD22 34

MHXB-PD25 34

MHXF25T 56

MHXF40T 56

MHXL 58

MLEB-ENAV19 18

MLEB-ENGR16 26

MLEB-ENGR21 26

MLEB-ENPD22 30

MLEB-ENSA18 12

MLEB-ENSA23 12

MLEP-R22 19

MLEP-R28 19

MLGB-GR16 24

MLGB-GR21 24

MLHB-AV19 16

MLHB-ER22 32

MLHB-PD16 28

MLHB-PD22 28

MLHB-PD25 28

MLHB-SA15 10

MLHB-SA18 10

MLHB-SA23 10

MLLX-DB22 33

MLLX-DB25 33

MLLX-PD22 33

MLLX-PD25 33

MLRB-RA22 20

MLRB-RA28 20

MLRB-RA28PL 20

MLRB-RP22 20

MLRB-RP28 20

MLRB-RP28PL 20

MLSE-ENAV19 17

MLSE-ENGR16 25

MLSE-ENGR21 25

MLSE-ENPD22 29

MLSE-ENSA18 11

MLSE-ENSA23 11

MLSG-GR16 23

MLSG-GR21 23

MLSS-AV19 15

MLSS-EL18 14

MLSS-ER22 31

MLSS-PD16 27

MLSS-PD22 27

MLSS-PD25 27

MLSS-SA15 9

MLSS-SA18 9

MLSS-SA23 9

MLUB-ENSA18 13

MLXB-DB22 34

MLXB-DB25 34

MLXB-PD22 34

MLXB-PD25 34

MM/4V 64

MM/BD 64

MM/SMT 64

MM/ST 64

MM/TMT 64

MM/TV 64

MM/VS 64

MM/WG 64

MM/WMT 64

MPAS 63

MPBE-2A 22

MPBE-2P 22

MPBE-5A 22

MPBE-5P 22

MPCL 51

MPCS 51

MPEB-ENAV19 18

MPEB-ENGR16 26

MPEB-ENGR21 26

MPEB-ENPD22 30

MPEB-ENSA18 12

MPEB-ENSA23 12

MPEL10 85

MPEL15 85

MPEL70 85

MPEP-R22 19

IND

EX

COOPER LIGHTING113



MPEP-R28 1

MPFZ15 83

MPFZ15C 83

MPGB-GR16 24

MPGB-GR21 24

MPGP 78

MPGS 79

MPHB-AV19 16

MPHB-ER22 32

MPHB-PD16 28

MPHB-PD22 28

MPHB-PD25 28

MPHB-SA15 10

MPHB-SA18 10

MPHB-SA23 10

MPIC10 69

MPIC15 69

MPIP-C 69

MPIP-CM 70

MPIP-S 71

MPIP-T 67

MPIP-TM 68

MPIP-W 66

MPIS10 71

MPIS15 71

MPIT10 67

MPIT15 67

MPITM25 68

MPITM32 68

MPITM40 68

MPIW10 66

MPIW15 66

MPLP 61

MPLX-DB22 33

MPLX-DB25 33

MPLX-PD22 33

MPLX-PD25 33

MPM4 74

MPMC 93

MPMM 58

MPMM25 58

MPMM32 58

MPMM40 58

MPMN 73

MPMP 81

MPMS 57

MPMS10 57

MPMS15 57

MPMS70 57

MPMX 94

MPNK 60

MPNKS25 60

MPNKS32 60

MPNKS40 60

MPPD 53

MPPL 72

MPPR 52

MPQC 47

MPQD 50

MPQF 49

MPQP 48

MPRB-RA22 20

MPRB-RA28 20

MPRB-RA28PL 20

MPRB-RP22 20

MPRB-RP28 20

MPRB-RP28PL 20

MPRC 92

MPRL 91

MPRS 90

MPRY 89

MPSE-ENAV19 17

MPSE-ENGR16 25

MPSE-ENGR21 25

MPSE-ENPD22 29

MPSE-ENSA18 11

MPSE-ENSA23 11

MPSF 55

MPSG-GR16 23

MPSG-GR21 23

MPSS-25 9

MPSS-32 9

MPSS-40 9

MPSS-408 9

MPSS-40Q 9

MPSS-AV19 15

MPSS-EL18 14

MPSS-ER22 31

MPSS-PD16 27

MPSS-PD22 27

MPSS-PD25 27

MPSS-SA15 9

MPSS-SA18 9

MPSS-SA23 9

MPTR 86

MPTR2315 86

MPTR2325 86

MPTR2332 86

MPTR2340 86

MPUB-ENSA18 13

MPVF-AL 21

MPVL-C 38

MPVR 80

MPVS-C 37

MPVS-W 37

MPWC 77

MPWE 72

MPWL 72

MPWM10G 76

MPWM50G 76

MPWM70G 76

MPWP 77

MPWR 59

MPXB-DB22 34

MPXB-DB25 34

MPXB-PD22 34

MPXB-PD25 34

MPXF25T 56

MPXF32T 56

MPXF35T 56

MPXF40T 56

MS/4V 64

MS/BD 64

MS/JB 64

MS/SF 64

MS/TMA 64

MS/TV 64

MS/VS 64

MS/WG 64

MS/WM 64

MS/WMA 64

MS10 81

MS240 95

MS240W 95

MS245R 95

MS245RW 95

MS35 95

MS37 95

MS50 81

MS70 81

PCS 84

PFT 87

PLVL-C 38

PLVS-C 37

PLVS-W 37

PP10 72

PP15 72

PP25 72

PP32 72

PP40 72

PS10 72

PS15 72

PS25 72

PS32 72

PS40 72

QZ3L 54

QZ5L 54

RAB 65

RBC 65

S2C2WP 65

S3C3WP 65

S4C4WP 65

SAV 65

SPK 65

SV/NK 65

SV1/NK 65

TV/NK 65

TV/WR 65

TYS 65

UB 84

VG/WR 65

VS/NK 65

VS/NK/1000 65

VS/WL 84

WG/NK 65

WG/WL 84

WG/WR 65

WP15 59

WP25 59

WP32 59

WP40 59

WS15 59

WS25 59

WS40 59

XP15 59

XP25 59

XP32 59

XP40 59

XS15 59

XS25 59

XS40 59

COOPER LIGHTING 114

NOTES

COOPER LIGHTING115

NOTES

The Source for Lighting Solutions

Avid Series [AII/AIS/AIM/AIL] Impact Flood Series [MS + MM]

Impact Wall Series [IP] Tribute [TR]

Cooper Lighting, LLC.

Customer First Center

1121 Highway 74 South

Peachtree City, GA 30269

P: 770-486-4800

F: 770-486-4801

www.cooperlighting.com

International Sales, USA


1121 Highway 74 South

Peachtree City, GA 30269

P: 770-486-4800

F: 770-486-4801

Canada


5925 McLaughlin Road

Mississauga, Ontario L5R 1B8

P: 905-507-4000

F: 905-568-7049

The Cooper Lighting Family

Halo

Metalux

Lumark

Sure-Lites

Neo-Ray

Corelite

Portfolio

Iris

Shaper

io

Lumière

Invue

McGraw-Edison

Streetworks

Fail-Safe

PDS

MWS

DLS

RSA

Ametrix

Printed in USAADH082733

Domestic Facilities

Cranbury, New Jersey

Elk Grove Village, Illinois

Irving, Texas

Ontario, California

Peachtree City, Georgia

Canadian Facilities

Calgary, Alberta T2E 7V9

Mississauga, Ontario L5R 1B8

Cooper Industries, Ltd.

600 Travis, Ste. 5600

Houston, TX 77002-1001

P: 713-209-8400

www.cooperindustries.com

Cooper Lighting and Lumark are valuable trademarks of Cooper Industries in the United States and other countries.

You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries.

cooper lighting - lumark

Documents