MCPc offer’s a complete lineup of interactive classroom products and services from projectors, interactive boards, audio enhancement systems, document cameras and interactive displays to desktops, laptops, tablets, Chromebooks and printers. All of which can be procured by Kentucky school districts without putting the project/order out to bid. Schools can utilize MCPc's competitevely bid purchasing contracts from KETS/KDE, KPC/KEDC, and UK. This document provides comparitive spec's to make purchasing interactive classroom components and solutions simple and easy... **SMART MAP-E PRICING IN RED IS SPECIFIC TO JEFFERSON COUNTY ONLY (MAP-E-30022114)** FOUR KEDC BG-1 APPROVED INTERACTIVE CLASSROOM PACKAGES - Page 1 MCPc was awarded a KEDC interactive classroom contract in January that allows schools to purchase BG-1 approved interactive classroom products and room configurations. These validated designs make it simple and easy for schools to purchase the design that works best for their environment. SMART INTERACTIVE BOARD COMPARISON - Page 2 **SMART MAP-E JEFFERSON COUNTY PRICING IN RED** Our lineup of interactive boards include SMART Technologies complete lineup of SMARTboards, Dell’s Interactive Board Solution, Panasonic’s lineup of Panaboards and Polyvision’s complete lineup of Eno boards. PROJECTOR COMPARISON - Pages 3-5 MCPc offers a complete lineup of standard throw, short throw and interactive projectors from Epson, NEC, Casio, SMART, Dell, InFocus, Panasonic, ViewSonic, and more. DOCUMENT CAMERA COMPARISON - Page 6 Popular document camera partners include SMART, Elmo, Lumens, Samsung, Ken-A-Vision and more… AUDIO ENHANCEMENT SYSTEM COMPARISON - Page 7 Speaker and audio enhancement systems from LightSpeed, Panasonic, SMART and more… SMART INTERACTIVE RESPONSE SYSTEM COMPARISON - Page 8 SMART Response systems are SIITS approved and a great way for students to collaborate in the classroom. INTERACTIVE DISPLAY COMPARISON - Page 9 Our lineup of display partners include Dell, Samsung, LG, NEC, InFocus, Panasonic, ViewSonic and more. This includes both standard and interactive/touch displays. SMART INTERACTIVE CLASSROOM SOFTWARE COMPARISON - Page 10 MCPc offers multiple software options from SMART for your particular school. This includes SMART Notebook, Math Tools, AMP and more… KETS DELL LAPTOP, TABLET, CHROMEBOOK & DESKTOP CONFIGURATIONS - Page 11-12 MCPc is the named agent for Dell on their KETS Workstation contract. Dell offers a complete lineup of instructional devices at great prices to all Kentucky Public K-12 institutions. These models include Latitude laptops, Optiplex desktops, Venue tablets and Precision workstations. MCPc also provides warranty support on Dell devices. KETS CANON PRINTER CONFIGURATIONS - Page 13 MCPc is an agent on Canon’s KETS printer contract. Canon offers a complete lineup of monochrome and color printers as well as single function and multifunction devices. PURCHASING CONTRACTS FOR KENTUCKY SCHOOLS - Page 14 MCPc holds multiple contracts within Kentucky that school districts can utilize. Contracts include 4 KETS contracts (Dell Worksation, Dell Server, Dell Networking, Canon Printer), 2 KEDC/KPC contracts (Interactive Classroom & % off list), a University of Kentucky contract (Interactive Classroom), and both a KVEC & CKEC contract. For more information or to request a quote, contact Rick Kendall at (859) 575-6108 or [email protected]Your Interactive Classroom Purchasing Guide for Je ffe rs on Cou nty Schools
13
Embed
Coolerado M50 suBMIttaL Data sHeet - Austral Air · Design and specifications may change without notice. Coolerado C60 Submittal Data Sheet | Page 2 of 3 Control systeMs Optional
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Standard Features 3-year limited warranty on HMX; 1-year warranty on all other components eer 100+ (energy efficiency ratio) COP 29.3+ Quiet and vibration free operation Cooling capacity increases as ambient temperature increases Low maintenance, simple winterization Low water use Patented thermodynamic cycle aBs pan Powder coated, electro-galvanized steel housing all electrical/water connections can be accessed from front easy to connect power/control wiring Integrated control module for reliable, economical operation Patented, high technology, poly heat and mass exchanger (HMX) Biocide integrated into HMX fibers removable panels - greater durability, ease of access No chemical refrigerants or ozone depleting chemicals No humidity added or removed Fresh, outside air for better indoor air quality (IaQ) Filtered air with reduced dust, pollens and allergens No tool filter access panel - 3 standard size 20” (508mm) x 25” (635mm) x 2” (50.8mm) MerV 8 ring frame air filters tapered intake air plenum for fan efficiency/even air distribution Conditioned air plenum provided – accommodates most any size, shape, duct Optional factory working air louvers can be mounted in side access panels Compact, easy to install, ideal height 69.00” cabinet 4 lifting lugs on the bottom of the unit for easier and safer handling during installation High efficiency, electronically commutated motor (eCM) Optional auto-variable speed thermostat available supplied with water filter (30 nominal micron, 9.875” cartridge) Drain with multi-dimensional port and screwed into the base Pre-cut exhaust cut out on the top service covers with tear drop mounting holes to avoid need to completely remove the screws adjustable feet to level the unit on uneven ground Pressure measurement port in the wet section for balancing the air flow thru the HMX’s Low water pressure cut off switch Made in the usa
Revised 11_11_2014Design and specifications may change without notice. Coolerado M50 Submittal Data Sheet | Page 1 of 3
Coolerado M50 suBMIttaL Data sHeet
JOB NAME: LOCATION:
CONTrACTOr: prOJECT MANAgEr:
supErINTENdENT: suBCONTrACTOr:
purCHAsEr: OrdEr NO:
ENgINEEr: prOJECT MANAgEr:
suBMITTEd TO: ApprOVAL: CONsTruCTION:
suBMITTEd BY: dATE:
uNIT dEsIgNATION: sCHEduLE NO: MOdEL NO:
Cooling PerFOrMaNCeOutdoor Design temperature ______°F ______°C DB, ______°F ______°C WB
total Unit Weight/sHIPPING DIMeNsIONsDry Install Weight: ..........................................................................370 lbs (168 kg)
Operating Weight (wet) ..............................................................420 lbs (190.5 kg)
shipping Dimensions ...................................30”(1,524mm)W x 50”(1,270mm)L x
........................................................................73”(1,854mm)H, 400 LBs (181.4 Kg)
Water*Minimum Flow with 1/2” NPt Connection...............................1.4 GPM (5.3 Lt)
supply Line Dynamic Pressure at unit ......................40 – 80 PsI / 225 – 500 kPa*the water flow rate listed is the instantaneous peak rate when the solenoid valve inside the unit is on and 0 gpm (lps) when the valve is off. the solenoid valve cycles on once every two minutes for varying lengths of time (5 to 40 second on time).
Working air Connections .......................................L side & r side (or) top
faCtory OPtIONsthermostat with auto-variable motor speed control ......................................
Insulated Product air Plenum ............................................................................
Working air Louver(s), replaces side access Panel(s) .................................. 2
ClearanCe tOLeraNCes
Outside air Intake
Working air exhaust(Out top, or Both sides)
Conditioned/Product air
Working air exhaust(Out top, or Both sides)
Coolerado C60 Fan and Performance Table
External Static
Pressure (Inches H2O)
Full Speed
Product Air Flow (CFM)
Full Speed
Product Air Flow
(M3/S)
Full Speed
Product Air Flow
(LPS)
Product Air Wet
Bulb Approach
Product Approx.
Wet Bulb Plus T
Working Air Flow (CFM)
Working Air Flow
(M3/S)
Working Air Flow
(LPS)
0.0 1,670 .79 788 94% 2 1,320 .62 622
0.1 1,580 .75 746 95% 2 1,260 .59 595
0.2 1,490 .70 703 96% 1 1,200 .57 566
0.3 1,400 .66 661 98% 1 1,140 .54 538
0.4 1,310 .62 618 100% 0 1,070 .50 505
0.5 1,220 .58 576 103% -1 1,010 .48 477
0.6 1,130 .53 533 107% -2 940 .44 444
0.7 1,040 .49 491 110% -3 870 .41 411
0.8 950 .45 448 113% -4 800 .38 376
0.9 860 .41 406 117% -5 730 .34 345
1.0 770 .36 363 120% -6 670 .32 316
Example: Design 98 DB / 62 WB, 0.1” ext. static, 98 - 62 = 36, 36 * 0.95 = 34.2, 98 – 34.2 = 63.8 ºF Product Air Temperature ≈
Design WB + 2 = 64 ºF
Clearance Tolerences
Optional Auto-Variable Speed Thermostat Surface Mounted3.5”W x 5”H x 1.25”D Requires 4 Low Voltage Conductors
Control Systems
Minimum clearances:Filter Side (can be either side): 26” clearance Opposite Control Side: 0”Air Intake (fan) Side: 12”Conditioned Air Plenum Side: 12”Top: 6”
Working Air can come out top or either side
Conditioned Air
Conditioned Air
Revised January 20, 2012Design and specifications may change without notice. Coolerado C60 Submittal Data Sheet | Page 2 of 3
Control systeMs
Optional auto-Variable speed thermostat surface Mounted3.5”W x 5”H x 1.25”D requires 4 Low Voltage Conductors
Coolerado M50 Performance Table*
external static Pressure Full speed Product air Flow approx.Product air Wet Bulb approach
Product approx. = WB + below
Working air Flow
Inches H2O
Pascal CFM CMH LPs F C CFM CMH LPs
0.00 0 1350 2290 635 94% 2 1.1 1000 1700 470
0.10 24.9 1280 2170 601 95% 2 1.1 950 1610 445
0.20 49.8 1200 2050 567 95% 1 .6 890 1510 420
0.30 74.7 1140 1930 534 98% 1 .5 840 1430 395
0.40 99.5 1060 1810 500 100% 0 0 790 1340 370
0.50 124.4 990 1690 466 103% -1 -.6 730 1240 345
0.60 149.3 920 1560 433 107% -2 -1.1 680 1150 320
0.70 174.2 850 1440 399 110% -3 -1.7 630 1070 295
0.80 199.1 780 1320 366 113% -4 -2.2 570 970 271
0.90 224 710 1200 332 117% -5 -2.8 520 880 246
1.00 248.9 630 1080 298 120% -6 -3.3 470 800 221
*Performance at sea level: Performance increases ~0.5% for every 1,000 feet / 305 m increase above sea level.
Sides: 0” If working air is exhausted from the top, no side clearance is needed. If (4) side louvers are used on (2) M50’s, and stacked next to each other, the min. spacing between each unit should be 21”. this will allow removal of the louver for servicing. If a baffle is needed between the M50’s to reduce mixing, a 21” wide x 30” tall baffle would direct most of the exhaust air out the back of the units, reducing mixing at the intake.
air intake (fan) Side: 24” Conditioned air Plenum Side: 12” top: 0”, or 6” for installation or more if Working air is exhaust out of top.
secure M50 units to angle support rail with screws located within 1” of the bottom of the base. there is an aBs drain pan that is above the bottom 1 inch. there are also 4 1/4” bolt holes at each corner that can be used to support or hold the unit. there are also 4 leveling feet below the unit.
Revised 11_11_2014Design and specifications may change without notice. Coolerado M50 Submittal Data Sheet | Page 2 of 3
Coolerado M50 PerFOrMaNCe taBLe*
Coolerado M50
Revised 11_11_2014Design and specifications may change without notice. Coolerado M50 Submittal Data Sheet | Page 3 of 3
DO NOT DRILL ORSCREW INTO THIS
LEFT SIDE VIEW RIGHT SIDE VIEW
D
CC
D
FINISH
TITLE:
B
DRT
DRT
UNLESS OTHERWISE SPECIFIED:
OPTIONAL LOUVERCOVER PANEL
(100-10098)
<----WET SECTION--->DO NOT DRILL ORSCREW INTO THIS
21" WIDE SECTION. WARRANTY WILLBE VOID IF THISSECTION IS CUT
OR DRILLED INTO.
SST RIVET TYP
18.94in 481mm
55.0
1in
1397
.2m
m
4.0in 102mmMIN CUT FROM
BOTTOM OF PLENUM.
THE CONDITIONED AIRPLENUM MUST BE CUTAND INSULATED TO BEATTACH TO INSULATED
FIELD DUCTING.
ENSURE PROPER EDGESEALING IS USED TOSTOP RUST ON CUT EDGES AND SEAL
FIELD INSTALLED DUCTS.
DO NOT SCREW INTOBASE. USE LIFTING LUGSOR HOLES PROVIDEDTO SECURE TO SITE.
RIGHT SIDE VIEW BACK VIEW
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFCOOLERADO CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF COOLERADO CORPORATION IS PROHIBITED.
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME TITLE:
SIZE
BDWG. NO. REV
WEIGHT: 231.35SCALE: 1:12
DRT
DRT 3/4/2012
3/4/2012M50B SHEETMETAL
ASSEMBLY
SHEET 3 OF 4
100-02000_MKTGCOOLERADO CORPORATION4430 GLENCOE STREET
DENVER, CO 80216PH: 303-375-0878
GAGEThicknessUNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32"ANGULAR: BEND 1 DEGREETWO PLACE DECIMAL 0.015THREE PLACE DECIMAL 0.005
DO NOT SCALE DRAWING
INTERPRET GEOMETRICTOLERANCING PER:
MATERIAL
BENDRADIUS
K-FACTOR
LBS
GENERAL NOTES: 1) BREAK ALL SHARP EDGES. 2) DIMENSIONS APPLY AFTER FINISH.3) FLAT PATTERNS ARE BASED ON COOLERADO STANDARD BEND DEDUCTIONS.4) FINISH: IF INDICATED, POWDER COAT AFTER ASSEMBLY PER ALL MANUFACTURER SPECIFICATION, CARDINAL T241-BG137, BEIGE FINE TEXTURE SEMI-GLOSS.5) PROVIDE A 3" X 3" PAINT COUPON AT THE BEGINNING AND END OF EACH LOT.
406.416.00 HOLE FOR
TOP EXHAUST CANBE COVERED WITH
LOUVER COVER(P/N 100-10098)
WHEN SIDE EXHAUSTOPTIONS ARE USED.
TOP EXHAUST OPTION:REQUIRES A HOOD OR DUCTTO PROTECT HMX FROM SUN
AND DIRECT HUMID AIR AWAYFROM THE INLET AIR INTAKE. 24.24in 615.8mm
27.9
9in
711.
1mm
28.00in 711.2mm29.75in 755.7mm
5/16-18 THREADFOR LEVELING FEET.
REMOVABLE LIFTINGAND TIE-DOWN LUGS.
TOP VIEW BOTTOM VIEW(SHOWN W/O PALLET)
CONDITIONEDAIR PLENUM.
INTAKE FANAIR PLENUM.
WET SECTION
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFCOOLERADO CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF COOLERADO CORPORATION IS PROHIBITED.
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME TITLE:
SIZE
BDWG. NO. REV
WEIGHT: 231.35SCALE: 1:12
DRT
DRT 3/4/2012
3/4/2012M50B SHEETMETAL
ASSEMBLY
SHEET 4 OF 4
100-02000_MKTGCOOLERADO CORPORATION4430 GLENCOE STREET
DENVER, CO 80216PH: 303-375-0878
GAGEThicknessUNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32"ANGULAR: BEND 1 DEGREETWO PLACE DECIMAL 0.015THREE PLACE DECIMAL 0.005
DO NOT SCALE DRAWING
INTERPRET GEOMETRICTOLERANCING PER:
MATERIAL
BENDRADIUS
K-FACTOR
LBS
GENERAL NOTES: 1) BREAK ALL SHARP EDGES. 2) DIMENSIONS APPLY AFTER FINISH.3) FLAT PATTERNS ARE BASED ON COOLERADO STANDARD BEND DEDUCTIONS.4) FINISH: IF INDICATED, POWDER COAT AFTER ASSEMBLY PER ALL MANUFACTURER SPECIFICATION, CARDINAL T241-BG137, BEIGE FINE TEXTURE SEMI-GLOSS.5) PROVIDE A 3" X 3" PAINT COUPON AT THE BEGINNING AND END OF EACH LOT.
OPTIONAL LOUVERCOVER PANEL
(100-10098)
<----WET SECTION--->DO NOT DRILL ORSCREW INTO THIS
21" WIDE SECTION. WARRANTY WILLBE VOID IF THISSECTION IS CUT
OR DRILLED INTO.
SST RIVET TYP
18.94in 481mm
55.0
1in
1397
.2m
m
4.0in 102mmMIN CUT FROM
BOTTOM OF PLENUM.
THE CONDITIONED AIRPLENUM MUST BE CUTAND INSULATED TO BEATTACH TO INSULATED
FIELD DUCTING.
ENSURE PROPER EDGESEALING IS USED TOSTOP RUST ON CUT EDGES AND SEAL
FIELD INSTALLED DUCTS.
DO NOT SCREW INTOBASE. USE LIFTING LUGSOR HOLES PROVIDEDTO SECURE TO SITE.
RIGHT SIDE VIEW BACK VIEW
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFCOOLERADO CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF COOLERADO CORPORATION IS PROHIBITED.
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME TITLE:
SIZE
BDWG. NO. REV
WEIGHT: 231.35SCALE: 1:12
DRT
DRT 3/4/2012
3/4/2012M50B SHEETMETAL
ASSEMBLY
SHEET 3 OF 4
100-02000_MKTGCOOLERADO CORPORATION4430 GLENCOE STREET
DENVER, CO 80216PH: 303-375-0878
GAGEThicknessUNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32"ANGULAR: BEND 1 DEGREETWO PLACE DECIMAL 0.015THREE PLACE DECIMAL 0.005
DO NOT SCALE DRAWING
INTERPRET GEOMETRICTOLERANCING PER:
MATERIAL
BENDRADIUS
K-FACTOR
LBS
GENERAL NOTES: 1) BREAK ALL SHARP EDGES. 2) DIMENSIONS APPLY AFTER FINISH.3) FLAT PATTERNS ARE BASED ON COOLERADO STANDARD BEND DEDUCTIONS.4) FINISH: IF INDICATED, POWDER COAT AFTER ASSEMBLY PER ALL MANUFACTURER SPECIFICATION, CARDINAL T241-BG137, BEIGE FINE TEXTURE SEMI-GLOSS.5) PROVIDE A 3" X 3" PAINT COUPON AT THE BEGINNING AND END OF EACH LOT.
406.416.00 HOLE FOR
TOP EXHAUST CANBE COVERED WITH
LOUVER COVER(P/N 100-10098)
WHEN SIDE EXHAUSTOPTIONS ARE USED.
TOP EXHAUST OPTION:REQUIRES A HOOD OR DUCTTO PROTECT HMX FROM SUN
AND DIRECT HUMID AIR AWAYFROM THE INLET AIR INTAKE. 24.24in 615.8mm
27.9
9in
711.
1mm
28.00in 711.2mm29.75in 755.7mm
5/16-18 THREADFOR LEVELING FEET.
REMOVABLE LIFTINGAND TIE-DOWN LUGS.
TOP VIEW BOTTOM VIEW(SHOWN W/O PALLET)
CONDITIONEDAIR PLENUM.
INTAKE FANAIR PLENUM.
WET SECTION
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OFCOOLERADO CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF COOLERADO CORPORATION IS PROHIBITED.
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME TITLE:
SIZE
BDWG. NO. REV
WEIGHT: 231.35SCALE: 1:12
DRT
DRT 3/4/2012
3/4/2012M50B SHEETMETAL
ASSEMBLY
SHEET 4 OF 4
100-02000_MKTGCOOLERADO CORPORATION4430 GLENCOE STREET
DENVER, CO 80216PH: 303-375-0878
GAGEThicknessUNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/32"ANGULAR: BEND 1 DEGREETWO PLACE DECIMAL 0.015THREE PLACE DECIMAL 0.005
DO NOT SCALE DRAWING
INTERPRET GEOMETRICTOLERANCING PER:
MATERIAL
BENDRADIUS
K-FACTOR
LBS
GENERAL NOTES: 1) BREAK ALL SHARP EDGES. 2) DIMENSIONS APPLY AFTER FINISH.3) FLAT PATTERNS ARE BASED ON COOLERADO STANDARD BEND DEDUCTIONS.4) FINISH: IF INDICATED, POWDER COAT AFTER ASSEMBLY PER ALL MANUFACTURER SPECIFICATION, CARDINAL T241-BG137, BEIGE FINE TEXTURE SEMI-GLOSS.5) PROVIDE A 3" X 3" PAINT COUPON AT THE BEGINNING AND END OF EACH LOT.