This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Type TCSB1 Type TCSB1 Convoluted Teflon® pressure hosewith stainless steel braid - standard wall
Type TCSB1 Type TCSB1 Flexible Teflon® convoluté avec tresse inox - paroi standard
Type TCSB1 Type TCSB1 gewellter Teflon® -Schlauch mitEdelstahl - Geflecht - Standardwandstärke
Construction:A helically convoluted PTFE (polytetrafluorethylene)inner tube, standard wall, with an outer cover ofAISI304 high tensile stainless steel braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittings
Typical applications:TCSB1 should be specified when pressure is applied.Recommended on all crimped assemblies.
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, paroi standard, avec tresse inox, hauteténacité, suivant AISI 304.
Applications:TCSB1 est utilisé pour des applications de pression.Il est recommandé pour toutes assemblages avecraccords.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.
TCSB1 peut être assemblé à des raccords sertis, avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) druckSchlauch, Standardwandstärke, mit Edelstahl -Geflecht aus AISI 304, mit hoher Zugfestigkeit.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.
TCSB1 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden.
R
D1
D2
D3
TCSB1
887 D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCSW1Type TCSW1 Flexible Teflon® convoluté avecspirale externe pour vide - paroi standard
Type TCSW1 Typ TCSW1 gewellter Teflon® - Schlauch mit externer Spirale für Vakuum -Standardwandstärke
Type TCSW1 Type TCSW1 Convoluted Teflon® hose withvacuum wire - standard wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression où vide, paroi standard.La spire externe en inox 304 garanti un excellenterésistance au vide. Bonne flexibilité et extrême rési-stance à l'écrasement.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.
TCSW1 peut être assemblé à des raccords sertispour des applications basse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,für Vakuumanwendungen, StandardwandstärkeDie externe Spirale aus Edelstahl (AISI 304) garan-tiert eine höhere Vakuum- und Knickfestigkeit undgute Flexibilität.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit HydraulikstutzenIndustriekupplungen.
TCSW1 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, standard wall. The externalAISI 304 wire support guarantees high vacuumresistance, good flexiblity and extreme kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittings
TCSW1 can be fitted with crimped fittings or withcuffed ends for low pressure applications.
R
D1
D2
D3
TCSW1
Size D1 D2 D3 R WP BP Vacuum Lmax Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m virgin Antistatic
Type TCSW1B1Type TCSW1B1 Flexible Teflon® convolutéavec spirale externe pour vide et tresse inox -paroi standard
Type TCSW1B1Typ TCSW1B1 gewellter Teflon® - Schlauchmit Vakuumspirale und Edelstahl - Geflecht -Standardwandstärke
Type TCSW1B1 Type TCSW1B1 Convoluted Teflon® hose with vacuum wire and stainless steel braid -standard wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi standard,avec spire inox et tresse haute résistance. Ce flexiblea une excellente résistance au vide et à l'écrasement.
Applications:TCSW1B1 est utilisé pour des applications vapeurou vide profond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.
TCSW1B1 peut être assemblé à des raccords sertis,pour des applications basse pression.
Anwendungen:TCSW1B1 wird bei Anwendungen mit heißem Dampfoder mit hohem Vakuum verwendet. Sehr gutemechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.
TCSW1B1 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, standard wall, with externalvacuum wire and high tensile stainless steel braid.The hose is very good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittings
Typical applications:TCSW1B1 should be specified for steam applicationsor when high vacuum hose applications are required.Generally excellent mechanical strength.
R
D1
D2
D3
TCSW1B1
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCSW1B6 Type TCSW1B6 Flexible Teflon® convolutéavec spirale externe pour vide et tresse PP -paroi standard
Type TCSW1B6 Type TCSW1B6 gew. Teflon® - Schlauch mitEdelstahl Vakuumspirale und PP- Geflecht -Standardwandstärke
Type TCSW1B6Type TCSW1B6 Convoluted Teflon® hose with vacuum wire and polypropylene braid -standard wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression, paroi standard, avecspire inox et tresse polypropylène.
Applications:TCSW1B6 est utilisé quand ou lorsque des applica-tions avec vibrations et fréquentes manipulations
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.
TCSW1B6 peut être assemblé à des raccords sertispour des applications basse pression.
Anwendungen:TCSW1B6 wird dann verwendet, wenn Vibrationenvorkommen und Flexibilität erforderlich.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.
TCSW1B6 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden.
Construction:A helically convoluted PTFE(polytetrafluorethylene)suction/pressure hose, standard wall, with externalvacuum wire and polypropylene yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittings
Typical applications:TCSW1B6 should be specified where vibrations orfrequent handling are applied.
R
D1
D2
D3
TCSW1B6
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCM - TCAM Type TCM Flexible Teflon® convoluté - paroi médium
Type TCM - TCAM Typ TCM gewellter Teflon® - Schlauch - mittlere Wandstärke
Type TCM - TCAMType TCM Convoluted Teflon® hose - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, basse pression, avec une bonne flexibilité,paroi médium, résistant à l'écrasement et au vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCM peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, Niederdruck, mit hoher Flexibilität, mittlere Wandstärke, knick- und vakuumfest.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCM- TCAM kann mit Pressarmaturen oder - bei Niederdruckbetrieb - spiralfreien glattenMuffen verwendet werden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)pressure hose, medium wall, giving good flexibility,kink, and vacuum resistance.
Fittings:Hose fittings with PTFE tail.Hose fittings with Hydraulic tail.Industrial fittings.Industrial fittings with PTFE lining.
TCM can be fitted with crimped fittings or with cuffedends for low pressure applications. if required thePTFE can be tafted or flared over the fitting giving a continues lining
R
D1
D2
D3
TCM - TCAM
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCMB1 - TCAMB1 Type TCMB1 Flexible Teflon® convoluté avec tresse inox - paroi médium
Type TCMB1 - TCAMB1 Type TCMB1 gewellter Teflon® - Schlauch mitEdelstahl - Geflecht - mittlere Wandstärke
Type TCMB1 - TCAMB1Type TCMB1 Convoluted Teflon® hose withstainless steel braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, paroi médium, avec tresse inox, hauteténacité, suivant AISI 304.
Applications:TCMB1 est utilisé pour des applications de pressionet de faible vide. Il est recommandé pour toutesassemblages avec raccords revêtus.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMB1 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, mit Edelstahl - Geflecht ausAISI 304, mit hoher Zugfestigkeit.
Anwendungen:TCMB1 wird verwendet, wenn Druck oder leichtesVakuum vorkommen. Empfohlen, für alle ausge-kleidete Flanschverbindungen.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMB1 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)inner tube, medium wall, with an outer cover ofAISI304 high tensile stainless steel braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMB1 should be specified when pressures orvacuum are applied. Recommended on all taftedflange assemblies.
Type TCMB6 - TCAMB6 Type TCMB6 Flexible Teflon® convoluté avectresse PP - paroi médium
Type TCMB6 - TCAMB6 Type TCMB6 gewellter Teflon® - Schlauch mitPP-Geflecht - mittlere Wandstärke
Type TCMB6 - TCAMB6 Type TCMB6 Convoluted Teflon® hose with polypropylene braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression, paroi épaisse, recouvertd'une tresse polypropylène.
Applications:TCMB6 est utilisé par sa flexibilité, et son poidsréduit à des applications en pression.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMB6 peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,dicke Wandstärke, mit Polypropylen - Geflecht.
Anwendungen:TCMB6 wird verwendet, wenn gute Flexibilität undniedriges Gewicht für Druckanwendungen erfor-derlich sind.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMB6 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)hose, heavy wall, with an outer cover of polypropyleneyarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMB6 should be specified when good flexibility andreduced weight are required for pressure applications.
Type TCMB9 - TCAMB9 Type TCMB9 Flexible Teflon® convoluté avectresse PVDF - paroi médium
Type TCMB9 - TCAMB9 Type TCMB9 gewellter Teflon® - Schlauch mitPVDF - Geflecht - mittlere Wandstärke
Type TCMB9 - TCAMB9 Type TCMB9 Convoluted Teflon® hose withPVDF braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression, paroi épaisse, recouvertd'une tresse PVDF
applications:TCMB9 est utilisé par sa flexibilité, et son poidsréduit à des applications en pression.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMB9 peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, mittlere Wandstärke, mit PVDF - Geflecht.
Anwendungen:TCMB9 wird verwendet, wenn gute Flexibilität undniedriges Gewicht für Druckanwendungen erfor-derlich sind.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMB9 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen
Construction:A helically convoluted PTFE (polytetrafluorethylene)hose, Medium wall, with an outer cover of PVDFyarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMB9 should be specified when good flexibilityand reduced weight are required for pressureapplications.
Type TCMW1 - TCAMW1 Type TCMW1 Flexible Teflon® convoluté avecspirale externe pour vide - paroi médium
Type TCMW1 - TCAMW1 Typ TCMW1 gewellter Teflon® - Schlauch mit externer Spirale für Vakuum - mittlereWandstärke
Type TCMW1 - TCAMW1Type TCMW1 Convoluted Teflon® hose with vacuum wire - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression où vide, paroi médium.La spire externe en inox 304 garanti un excellenterésistance au vide. Bonne flexibilité et extrême résistance à l'écrasement.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMW1 peut être assemblé à des raccords sertisavec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,für Vakuumanwendungen, mittlere Wandstärke.Die externe Spirale aus Edelstahl (AISI 304) garan-tiert eine höhere Vakuum- und Knickfestigkeit undgute Flexibilität.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMW1 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall. The externalAISI 304 wire support guarantees high vacuumresistance, good flexiblity and extreme kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
TCMW1 can be fitted with crimped fittings or withcuffed ends for low pressure applications. if requiredthe PTFE can be tafted or flared over the fittinggiving a continues lining
R
D1
D3
D2
TCMW1 - TCAMW1
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCMW1B1-TCAMW1B1Type TCMW1B1 Flexible Teflon® convoluté avec spirale externe pour vide et tresse inox -paroi médium
Type TCMW1B1-TCAMW1B1Typ TCMW1B1 gewellter Teflon® - Schlauch mit Vakuumspirale und Edelstahl - Geflecht -mittlere Wandstärke
Type TCMW1B1-TCAMW1B1Type TCMW1B1 Convoluted Teflon® hose with vacuum wire and stainless steel braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi médium, avecspire inox et tresse haute résistance. Ce flexible a uneexcellente résistance au vide et à l'écrasement.
Applications:TCMW1B1 est utilisé pour des applications vapeurou vide profond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMW1B1 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und Edelstahl -Geflecht mit hoher Zugfestigkeit. Dieser Schlauch hateine hohe Vakuum- und Knickfestigkeit.
Anwendungen:TCMW1B1 wird bei Anwendungen mit heißem Dampfoder mit hohem Vakuum verwendet. Sehr gutemechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMW1B1 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glattenDurchgang zu erreichen.
Construction:A helically convoluted PTFE (Polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and high tensile stainless steel braid.The hose has very good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMW1B1 should be specified for steam applica-tions or when high vacuum hose applications arerequired. Generally excellent mechanical strength.
R
D1
D2
D3
TCMW1B1-TCAMW1B1
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.
min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type TCMW1B6-TCAMW1B6Type TCMW1B6 Flexible Teflon® convoluté avec spirale externe pour vide et tresse PP -paroi médium
Type TCMW1B6-TCAMW1B6Type TCMW1B6 gewellter Teflon® - Schlauchmit Edelstahl Vakuumspirale und PP- Geflecht -mittlere Wandstärke
Type TCMW1B6-TCAMW1B6Type TCMW1B6 Convoluted Teflon® hose with vacuum wire and polypropylene braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service vide ou pression, paroi médium,avec spire inox et tresse polypropylène.
Applications:TCMW1B6 est utilisé quand ou lorsque des applica-tions avec vibrations et fréquentes manipulationssont alliées au service vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMW1B6 peut être assemblé à des raccords sertisavec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und Polypro-pylen Geflecht. Dieser Schlauch hat eine hoheVakuum- und Knickfestigkeit.
Anwendungen:TCMW1B6 wird dann verwendet, wenn Vibrationenvorkommen und Flexibilität erforderlich ist und diesin Kombination mit Vakuum.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMW1B6 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE(polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and polypropylene yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMW1B6 should be specified where vibrations orfrequent handling are applied in combination withvacuum.
Type TCMW1B9-TCAMW1B9 Type TCMW1B9 Flexible Teflon® convoluté avec spirale externe pour vide et tresse PVDF - paroi médium
Type TCMW1B9-TCAMW1B9 Type TCMW1B9 gewellter Teflon® - Schlauch mit Edelstahl Vakuumspirale und PVDF -Geflecht - mittlere Wandstärke
Type TCMW1B9-TCAMW1B9 Type TCMW1B9 Convoluted Teflon® hose withvacuum wire and PVDF braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service vide ou pression, paroi médium,avec spire inox et tresse PVDF
Applications:TCMW1B9 est utilisé quand ou lorsque des applica-tions avec vibrations et fréquentes manipulationssont alliées au service vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCMW1B9 peut être assemblé à des raccords sertisavec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und PVDF(Kynar) Geflecht. Dieser Schlauch hat eine hoheVakuum- und Knickfestigkeit.
Anwendungen:TCMW1B9 wird dann verwendet, wenn Vibrationenvorkommen und Flexibilität erforderlich ist und diesin Kombination mit Vakuum.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCMW1B9 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and PVDF yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCMW1B9 should be specified where vibrations orfrequent handling are applied in combination withvacuum.
Type TCH - TCAH Type TCH Flexible Teflon® convoluté -paroi épaisse
Type TCH - TCAH Typ TCH gewellter Teflon® - Schlauch -Starkwandig
Type TCH - TCAHType TCH Convoluted Teflon® hose - HEAVYWALL
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, basse pression, avec une bonne flexibilité,paroi épaisse, résistant à l'écrasement et au vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCH peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,Niederdruck, mit hoher Flexibilität, Starkwandig,knick- und vakuumfest.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCH- TCAH kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)pressure hose, HEAVY WALL, giving good flexibility,kink, and vacuum resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
TCH can be fitted with crimped fittings or with cuffedends for low pressure applications. if required thePTFE can be tafted or flared over the fitting giving a continues lining.
Type TCHB1 - TCAHB1 Type TCHB1 Flexible Teflon® convoluté avectresse inox - paroi épaisse
Type TCHB1 - TCAHB1 Type TCHB1 gewellter Teflon® - Schlauch mitEdelstahl - Geflecht - starkwandig
Type TCHB1 - TCAHB1Type TCHB1 Convoluted Teflon® hose withstainless steel braid - heavy wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, paroi épaisse, avec tresse inox, hauteténacité, suivant AISI 304.
Applications:TCHB1 est utilisé pour des applications de pressionet de vide. Il est recommandé pour toutes assem-blages avec raccords revêtus.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHB1 peut être assemblé à des raccords sertis, avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,starkwandig, mit Edelstahl - Geflecht aus AISI 304,mit hoher Zugfestigkeit.
Anwendungen:TCHB1 wird verwendet, wenn Druck oder Vakuumvorkommen. Empfohlen, für alle ausgekleideteFlanschverbindungen.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCHB1 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)inner tube, heavy wall, with an outer cover of AISI304high tensile stainless steel braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHB1 should be specified when pressures orvacuum are applied. Recommended on all taftedflange assemblies.
Type TCHB6 - TCAHB6 Type TCHB6 Flexible Teflon® convoluté avec tresse PP - paroi épaisse
Type TCHB6 - TCAHB6 Type TCHB6 gewellter Teflon® - Schlauch mit PP-Geflecht - starkwandig
Type TCHB6 - TCAHB6 Type TCHB6 Convoluted Teflon® hose withpolypropylene braid - heavy wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolution hélicoïdale, service pression, paroiépaisse, recouvert d'une tresse polypropylène.
Applications:TCHB6 est utilisé par sa flexibilité, et son poidsréduit à des applications en pression.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHB6 peut être assemblé à des raccords sertis avec ou sans revêtement PTFE pour desapplications basse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, starkwandig, mit Polypropylen -Geflecht.
Anwendungen:TCHB6 wird verwendet, wenn gute Flexibilität und niedriges Gewicht für Druckanwendungenerforderlich sind.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCHB6 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethy-lene)hose, heavy wall, with an outer cover of polypropylene yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHB6 should be specified when good flexibilityand reduced weight are required for pressureapplications.
Type TCHB9 - TCAHB9 Type TCHB9 Flexible Teflon® convoluté avectresse PVDF - paroi épaisse
Type TCHB9 - TCAHB9 Type TCHB9 gewellter Teflon® - Schlauch mitPVDF-Geflecht - starkwandig
Type TCHB9 - TCAHB9 Type TCHB9 Convoluted Teflon® hose withPVDF - HEAVY wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression, paroi épaisse, recouvertd'une tresse PVDF
applications:TCHB9 est utilisé par sa flexibilité, et son poidsréduit à des applications en pression.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHB9 peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,starkwandig mit PVDF - Geflecht.
Anwendungen:TCHB9 wird verwendet, wenn gute Flexibilität undniedriges Gewicht für Druckanwendungen erfor-derlich sind.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCHB9 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)hose, HEAVY wall, with an outer cover of PVDFyarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHB9 should be specified when good flexibility andreduced weight are required for pressure applications.
Type TCHW1B1-TCAHW1B1Type TCHW1B1 Flexible Teflon®
convoluté avec spirale externe pour vide et tresse inox - paroi épaisse
Type TCHW1B1-TCAHW1B1Typ TCHW1B1 gewellter Teflon®
- Schlauch mit Vakuumspirale und Edelstahl - Geflecht - starkwandig
Type TCHW1B1-TCAHW1B1Type TCHW1B1 Convoluted Teflon®
hose with vacuum wire and stainless steel braid - heavy wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi épaisse, avecspire inox et tresse haute résistance. Ce flexible aune excellente résistance au vide et à l'écrasement.
Applications:TCHW1B1 est utilisé pour des applications vapeurou vide profond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHW1B1 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, heavy wall, with externalvacuum wire and high tensile stainless steel braid.The hose is very good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHW1B1 should be specified for steam applicationsor when high vacuum hose applications are required.Generally excellent mechanical strength.
R
D1
D2
D3
TCHW1B1-TCAHW1B1
Size D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, Starkwandig, Vakuumspirale undEdelstahl Geflecht mit hoher Zugfestigkeit. DieserSchlauch hat eine hohe Vakuum- undKnickfestigkeit.
Anwendungen:TCHW1B1 wird bei Anwendungen mit heißem Dampfoder mit hohem Vakuum verwendet. Sehr gutemechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.TCHW1B1 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
*Xtraflex 2 convoluted-EF 12-01-2006 22:09 Pagina 21
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service vide ou pression, paroi épaisse,avec spire inox et tresse polypropylène.
Applications:TCHW1B6 est utilisé quand ou lorsque des applica-tions avec vibrations et fréquentes manipulationssont alliées au service vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHW1B6 peut être assemblé à des raccords sertisavec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, Starkwandig, Vakuumspirale undPolypropylen Geflecht. Dieser Schlauch hat einehohe Vakuum- und Knickfestigkeit
Anwendungen:TCHW1B6 wird dann verwendet, wenn Vibrationenvorkommen und Flexibilität erforderlich ist und diesin Kombination mit Vakuum.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCHW1B6 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE(polytetrafluorethylene)suction/pressure hose, Heavy wall, with externalvacuum wire and polypropylene yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHW1B6 should be specified where vibrations orfrequent handling are applied in combination withvacuum.
*Xtraflex 2 convoluted-EF 12-01-2006 22:09 Pagina 22
Type TCHW1B9-TCAHW1B9Type TCHW1B9 Flexible Teflon® convolutéavec spirale externe pour vide et tresse PVDF- paroi épaisse
Type TCHW1B9-TCAHW1B9Type TCHW1B9 gew. Teflon® - Schlauch mitEdelstahl Vakuumspirale und PVDF - Geflecht- starkwandig
Type TCHW1B9-TCAHW1B9Type TCHW1B9 Convoluted Teflon® hose withvacuum wire and PVDF braid - Heavy wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service vide ou pression, paroi épaisse,avec spire inox et tresse PVDF
Applications:TCHW1B9 est utilisé quand ou lorsque des applica-tions avec vibrations et fréquentes manipulationssont alliées au service vide.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TCHW1B9 peut être assemblé à des raccords sertisavec ou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen)Schlauch, Starkwandig, Vakuumspirale und PVDFGeflecht. Dieser Schlauch hat eine hohe Vakuum-und Knickfestigkeit.
Anwendungen:TCHW1B9 wird dann verwendet, wenn Vibrationenvorkommen und Flexibilität erforderlich ist unddies in Kombination mit Vakuum.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TCHW1B9 kann mit Pressarmaturen oder - beiNiederdruckbetrieb - spiralfreien glatten Muffenverwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Construction:A helically convoluted PTFE(polytetrafluorethylene)suction/pressure hose, Heavy wall, with externalvacuum wire and PVDF yarn braid.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TCHW1B9 should be specified where vibrations orfrequent handling are applied in combination withvacuum.
Type TMCF - TAMCF Type TMCF COREFLEX Flexible Teflon®
convoluté avec spirale externe pour vide -paroi médium
Type TMCF - TAMCF Typ TMCF COREFLEX gewellter Teflon® -Schlauch mit externer Spirale für Vakuum -mittlere Wandstärke
Type TMCF - TAMCFType TMCF COREFLEX Teflon® hose withvacuum wire - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdale, service pression où vide, paroi médium.La spire externe en inox 304 garanti un excellenterésistance au vide. Bonne flexibilité et extrême résistance à l'écrasement.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TMCF peut être assemblé à des raccords sertis avecou sans revêtement PTFE pour des applicationsbasse pression.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,für Vakuumanwendungen, mittlere Wandstärke.Die externe Spirale aus Edelstahl (AISI 304) garan-tiert eine höhere Vakuum- und Knickfestigkeit undgute Flexibilität.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit HydraulikstutzenIndustriekupplungen.PTFE -beschichtete Industriekupplungen.
TMCF kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall. The externalAISI 304 wire support guarantees high vacuumresistance, good flexiblity and extreme kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
TMCF can be fitted with crimped fittings or withcuffed ends for low pressure applications. if requiredthe PTFE can be tafted or flared over the fittinggiving a continues lining.
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi médium, avecspire inox et tresse haute résistance. Ce flexible aune excellente résistance au vide et à l'écrasement.
Applications:TMCFB1 est utilisé pour des applications vapeur ou vide profond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TMCFB1 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Applications typiques: TMCFB1 devrait être indiqué pour des applicationsde vapeur ou quand des applications élevées deconduite à dépression sont exigées. Force mécani-que généralement excellente.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und Edelstahl -Geflecht mit hoher Zugfestigkeit. Dieser Schlauchhat eine hohe Vakuum- und Knickfestigkeit.
Anwendungen:TMCFB1 wird bei Anwendungen mit heißem Dampfoder mit hohem Vakuum verwendet. Sehr gutemechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.TMCFB1 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Typische Anwendungen: TMCFB1 sollte für Dampfanwendungen spezifiziertwerden oder, wenn hohe Vakuumschlauchanwen-dungen angefordert werden. Im Allgemeinen aus-gezeichnete mechanische Stärke.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and high tensile stainless steel braid.The hose has very good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TMCFB1 should be specified for steam applicationsor when high vacuum hose applications are required.Generally excellent mechanical strength.
Type TMCFB6 - TAMCFB6 Type TMCFB6 Flexible Teflon® convoluté avecspirale externe pour vide et tresse Polypropy-lène - paroi médium
Type TMCFB6 - TAMCFB6 Typ TMCFB6 gewellter Teflon® - Schlauch mitVakuumspirale aus Edelstahl und Polypropy-len- Geflecht - mittlere Wandstärke
Type TMCFB6 - TAMCFB6 Type TMCFB6 COREFLEX B6, Convoluted Teflon®
hose with vacuum wire and Polypropylenebraid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi médium, avecspire inox et tresse en Polypropylène. Ce flexible aune excellente résistance au vide et à l'écrasement.
Applications:TMCFB6 est utilisé pour des applications en videprofond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TMCFB6 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Applications typiques:TMCFB6 devrait être indiqué pour des applicationsde vapeur ou quand des applications élevées deconduite à dépression sont exigées. Force mécanique généralement excellente.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und PolypropylenGeflecht. Dieser Schlauch hat eine hohe Vakuum- und Knickfestigkeit.
Anwendungen:TMCFB6 wird bei Anwendungen mit hohem Vakuumverwendet. Sehr gute mechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TMCFB6 kann mit Pressarmaturen oder - bei Niederdruckbetrieb - spiralfreien glatten Muffen verwendet werden. Falls gewünscht, kann dieArmatur PTFE -beschichtet werden, um einen glatten Durchgang zu erreichen.
Typische Anwendungen: TMCFB6 sollte spezifiziert werden wenn hoheVakuumschlauchanwendungen angefordert werden.Im Allgemeinen ausgezeichnete mechanische Stärke.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and Polypropylene braid. The hose hasvery good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TMCFB6 should be specified for high vacuum hose applications are required. Generally excellentmechanical strength.
D1
D2
D3
R
TMCFB6 - TAMCFB6
Teflo
n®is
a re
gist
red
trade
mar
k of
Dup
ont
Autres matières sur demande.Nous nous réservons le droit de changer ces informations sans prévis.
Abweichende Werkstoffe auf Anfrage. Wir behalten uns das Recht vor, Änderungen ohne vorherige Mitteilung durchzuführen.
Other materials on request.We reserve the right to alter the specifications without notice.
Type TMCFB9 - TAMCFB9 Type TMCFB9 COREFLEX Flexible Teflon®
convoluté avec spirale externe pour vide ettresse PVDF (Kynar) - paroi médium
Type TMCFB9 - TAMCFB9 Typ TMCFB9 COREFLEX gewellter Teflon® -Schlauch mit Vakuumspirale aus Edelstahl undPVDF (Kynar)- Geflecht - mittlere Wandstärke
Type TMCFB9 - TAMCFB9 Type TMCFB9 COREFLEX B9, ConvolutedTeflon® hose with vacuum wire and PVDF(Kynar) braid - medium wall
Construction:Tube PTFE (polytétrafluoréthylène) avec convolutionhélicoïdal service vide pression, paroi médium, avecspire inox et tresse en PVDF (Kynar). Ce flexible aune excellente résistance au vide et à l'écrasement.
Applications:TMCFB9 est utilisé pour des applications en videprofond. Bonne résistance mécanique.
Raccords:Raccords cannelés pour PTFE.Raccords cannelés type hydraulique.Raccords industriels.Raccords industriels revêtus PTFE.
TMCFB9 peut être assemblé à des raccords sertis,avec ou sans revêtement PTFE pour des applicationsbasse pression.
Applications typiques:TMCFB9 devrait être indiqué pour des applicationsde vapeur ou quand des applications élevées deconduite à dépression sont exigées. Force mécani-que généralement excellente.
Konstruktion:Spiralgewellter PTFE (Polytetrafluorethylen) Schlauch,mittlere Wandstärke, Vakuumspirale und PVDF(Kynar) Geflecht. Dieser Schlauch hat eine hoheVakuum- und Knickfestigkeit.
Anwendungen:TMCFB9 wird bei Anwendungen mit hohem Vakuumverwendet. Sehr gute mechanische Resistenz.
Kupplungen:Armaturen mit Stutzen für PTFE-Schläuche.Armaturen mit Hydraulikstutzen.Industriekupplungen.PTFE -beschichtete Industriekupplungen.
TMCFB9 kann mit Pressarmaturen oder - bei Nieder-druckbetrieb - spiralfreien glatten Muffen verwendetwerden. Falls gewünscht, kann die Armatur PTFE -beschichtet werden, um einen glatten Durchgangzu erreichen.
Typische Anwendungen: TMCFB9 sollte spezifiziert werden wenn hoheVakuumschlauchanwendungen angefordert werden.Im Allgemeinen ausgezeichnete mechanische Stärke.
Construction:A helically convoluted PTFE (polytetrafluorethylene)suction/pressure hose, medium wall, with externalvacuum wire and PVDF (Kynar) braid. The hose hasvery good vacuum and kink resistance.
Fittings:Hose fittings with PTFE tailHose fittings with Hydraulic tailIndustrial fittingsIndustrial fittings with PTFE lining
Typical applications:TMCFB9 should be specified for high vacuum hose applications are required. Generally excellentmechanical strength.
D1
D2
R
TMCFB9 - TAMCFB9
Teflo
n®is
a re
gist
red
trade
mar
k of
Dup
ont
887 D1 D2 D3 R WP BP Vacuum Lmax Weight Ref. Ref.min. max. mm min. max. Bar 20°C mbar20°C m gr/m virgin Antistatic
Type M1B1 Ringgewellter Metallschlauch mit Umflechtung
Type M1B1Type M1B1 Metal corrugated hose with braiding
Construction :Tuyau métallique ondulé parallèle (AISI 321) avec tresse métallique (AISI 304).Gamme de température -270°C à 550°C
Applications:Des tuyaux de pression en métal sont généralementutilisés dans l'industrie chimique, pour absorberle vide, la vibration, la dilatation thermique et lesmouvements latéraux.
Raccords :Raccords à filetage, brides et embouts à souder.
Konstruktion: Ringgewellter Metallschlauch (Werkstoff Nr.1.4541)mit Edelstahl Geflecht (Werkstoff Nr. 1.4301).Temperaturbereich -270°C bis 550°C.
Anwendungen:Metalldruckschläuche werden im Allgemeinen inder chemischen Industrie benutzt, um Vakuum,Erschütterung, thermische Expansion und seitlicheBewegungen absorbieren.
Kupplungen:Armaturen mit Gewindeanschlüsse, Flansche undAnschweißenden.
Construction:Stainless steel, parallel corrugated hose (AISI 321)with stainless steel braid (AISI 304).Temperature range -270°C till 550°C.
Applications:Metal pressure hoses are generally used in thechemical industry, to absorb vacuum, vibration,thermal expansion and lateral movements.
Couplings:Hose fittings with threading, flanges and welding ends.
RD
3
D1
D2
Autres matières sur demande.Nous nous réservons le droit de changer ces informations sans prévis.
Abweichende Werkstoffe auf Anfrage. Wir behalten uns das Recht vor, Änderungen ohne vorherige Mitteilung durchzuführen.
Other materials on request.We reserve the right to alter the specifications without notice.