CONVEYOR POWER UNIT, Model CPU3 A.V.W. Equipment Co. Inc. 105 South 9th Avenue, Maywood, IL, 60153 Phone: 708-343-7738 Fax: 708-343-9065 email: [email protected] Website: www.avwequipment.com The AVW Stainless Steel CONVEYOR POWER UNIT features a gravity feed tank with adjustable controls inside the tank. No drippings or leakage of fluids from controls on the floor. Fabricated from stainless steel. -Heavy Duty Stainless Steel -Contained Controls -Clean Design -Directional Valve-Forward, Neutral and Reverse ELECTRICAL MOTOR: 7.5HP (or 10HP), 1770 RPM PUMP: 10GPM max DIMENSION: 30”W x 16”D x 38”H TANK: 30” x 16” x 20”
4
Embed
CONVEYOR POWER UNIT, Model CPU3 - Focused Car Wash …
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CONVEYOR POWER UNIT, Model CPU3
A.V.W. Equipment Co. Inc. 105 South 9th Avenue, Maywood, IL, 60153 Phone: 708-343-7738 Fax: 708-343-9065 email: [email protected] Website: www.avwequipment.com
The AVW Stainless Steel CONVEYOR POWER UNIT features a gravity feed tank
with adjustable controls inside the tank. No drippings or leakage of fluids from controls on the floor.
Fabricated from stainless steel.
-Heavy Duty Stainless Steel -Contained Controls
-Clean Design -Directional Valve-Forward, Neutral and Reverse
ELECTRICAL MOTOR: 7.5HP (or 10HP), 1770 RPM PUMP: 10GPM max
DIMENSION: 30”W x 16”D x 38”H TANK: 30” x 16” x 20”
30’’
18’’
20’’
38’’
8
16
7
N
F
HEAT EXCHANGER LINES
DIRECTIONAL CONTROL VALVE POSITIONS: F- FORWARD N- NEUTRAL R- REVERSE
14
15
HYDRAULIC OIL FLOW 12
14
Heat Exchanger Lines
Low Level Switch
Pressure Return from Conveyor Pressure Out to Conveyor
11
13
17
16
Remote Pulse Kit
CONVEYOR POWER UNIT, Model CPU3
IN TANK:
Remote Kit
17
11
15 10
R
Case Drain
16’’
15
12
1
2 BELL HOUSING
4
A.V.W. Equipment Co. Inc. 105 South 9th Avenue, Maywood, IL, 60153 Phone: 708-343-7738 Fax: 708-343-9065 email: [email protected] Website: www.avwequipment.com
17 TANK 30” x 66” x 20” -With 3 Couplings 3/4’’ (welded ) for following lines: Return, Pressure Out and Case Drain -w/two Couplings ¾” (welded to tank), for Heat Exchanger’s tubing
CPU3-T 1
- -
COVER (LID) LID SUPPORT
CPU2-V LS1
1
STAND (Legs: sq.tub. 1 ½” x 1 ½” x 18” lg.) CPU2-A 1