Machine speed Tolerance Energy supply: Compressed air: Net weight Maximum roll width Minimum label width Minimum label length Ø max. unwinding labels Ø max. rewinding labels Core labels inner diameter Dispensing speed Label material Max. 50 mt. / min (Depending on Pitch) Converted self – adhesive label material with adhesive Maximum width (including backing paper) Up to 160 mm Label length Label roll unwinder outer diameter Label roll rewinder outer diameter Core labels inner diameter 5 to 600 mm Up to 300 mm Uo to 200 mm 3” Max. 70 mt. / min (Depending on the type of work to be fulfilled) +-1 mm 3 – N/PE, 400V, 50HZ, 5A 6 Bar 600 Kg Up to 180 mm 25 mm Dispensing label pitch x 1,3 400 mm 400 mm 3” TECHNICAL INFO LABEL DISPENSER MAIN LABEL SPECIFICATIONS Main material Auxiliary label (ex. RFID tags) Sefl-adhesive material Finished label (ex. Pocket-tags) TYPE OF JOB [email protected] · www.arque.com Carretera del Mig, 54 · 08907 L’Hospitalet de Llobregat +34 932 615 300 SIMPLE DISPENSATION & LAMINATION C180 SDL CONVERTING MACHINERY
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Machine speed
Tolerance
Energy supply:
Compressed air:
Net weight
Maximum roll width
Minimum label width
Minimum label length
Ø max. unwinding labels
Ø max. rewinding labels
Core labels inner diameter
Dispensing speed
Label material
Max. 50 mt. / min (Depending on Pitch)
Converted self – adhesive label material with adhesive
Maximum width (including backing paper)
Up to 160 mm
Label length
Label roll unwinder outer diameter
Label roll rewinder outer diameter
Core labels inner diameter
5 to 600 mm
Up to 300 mm
Uo to 200 mm
3”
Max. 70 mt. / min(Depending on the type of work to be fulfilled)
+-1 mm
3 – N/PE, 400V, 50HZ, 5A
6 Bar
600 Kg
Up to 180 mm
25 mm
Dispensing label pitch x 1,3
400 mm
400 mm
3”
TECHNICAL INFO
LABEL DISPENSER
MAIN LABEL SPECIFICATIONS
Main material Auxiliary label(ex. RFID tags)
Sefl-adhesive material
Finished label(ex. Pocket-tags)
TYPE OF JOB
[email protected] · www.arque.comCarretera del Mig, 54 · 08907 L’Hospitalet de Llobregat
+34 932 615 300
SIMPLE DISPENSATION & LAMINATION
C180 SDLCONVERTING MACHINERY
Main material label roll
Guidance system
Label dispenser
Vision system control
Self-adhesive material
Self-adhesive material waste
Lamination zone
Slitting zone
Slitting waste rewinding system
RFID verification system
Data display
Finished material Roll
1
1
7
4
10
2
8
5
11
3
9
6
12
2
3
4
56
7
9
8
10
12
11
Main material label roll is unwinded passing through the guidance system to ensure accurancy during the process.
Pre-printed marks on main label are required.
Lamination system add a self-adhesive material to the labeled main material.
Right after, two adjustable blades trim the leftover edges.
Trims are rewinded in a waste roll shaft while finished material is perfectly rewinded in the finished roll material shaft.
Additionally, we offer the possibility to install a RFID verification system.
Material pass to the labeling system which dispense the auxiliary label (ex. RFID tags) when detects the pre-printed marks.
Right after labeling, we offer the possibility to install a vision system control. Empowered with a camera and powerfull but “easy to use” software, allows to control the quality of the work regarding position of labeling. Recommended for high speed working uses.