This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Please contact us for shipping costs and information. You can check our sales terms and conditions on the CRE TECHNOLOGY website:http://www.cretechnology.com/en/p/33/the-company/Sales-terms
cre ats panels Automatic transfer switch panels - From 0 to 3200APart number: A63Z2 / ICGENT4XXXX -12/24-0 /ICGENM4XXXX - 12/24-2
BATTERY CHARGES
CRE TECHNOLOGY’s range of battery chargers is designed to supply voltage to the battery with a permanent connection and a maximum of efficiency.
4 RANGES
The BP+305, Compact, BP and the BPRB series are available:• From 3A to 40A in 12VDC or 24VDC
• Single or three-phase input, all chargers support 50Hz and 60Hz• Voltage input range from 85VAC to 550VAC
PRGRAMMING
CRE MONITORThe CRE MONITOR Software is a PC Windows based Software which al-low to control, adjust and monitor the AC/IC/TCGEN 2.0 modules. Even if the AC/ICGEN 2.0 display allow to configure all parameters through its display and buttons on the front panel, this PC software offer a much easier way of programming and displaying, and allow to upload and dowload configuration files.It also offer scada features with all electrical and mechanical parame-ters available in the control module.
RELATED PRODUCT
BP + 305 RANGE
The BP+ battery chargers range offers a range of input voltages in singlephase, a range of output current from 3A to 10A and voltage output from 12VDC to 24VDC.
They integrate a permanent short-circuit protection and accept wit-hout damage the electrical starters inrush current. Their ergonomic design allows you to easily integrate it into your plant thanks to their lightness, compactness and Din Rail support.• With Diode integrated• Can be installed on DIN Rail• Competitive price
• User friendly each command with own button, own led indicator and intuitive keyboard
• History Events log (250) and data- logger• Fully programmable by keyboard• 12 month warranty• Intelligent Fast setup menu.
COMPOSITION
• 1 Metal case 15/10 thick painted by epoxy powder RAL7042
• 1 Power contactors (25A to 3200A)• 1 Automatic battery charger (12 VDC or 24 VDC)• 9 Protection fuses fox auxiliary• 3 Digital outputs with relays• 2 Digital outputs with power relays for cranck and fuel• 1 Alarm Buzzer• 1 On/Off key• 3 Ampermetric transformers• 1 Emergency button• 1 ACGEN2.0 controller
ENVIRONMENT (ACGEN 2.0)• Operating temperature range: -30°C ... +70°C• Ambient protection IP55• Range VDC: 8-35 / Range VAC: 50-500• Measurements TRMS: 0,2% ±1digit• Built-in conformity to EN60439-1
SPECIAL FUNCTIONS ON BOARD (ACGEN 2.0)• Remote start/stop• Timer start/stop for programmable daily or weekly
starts/stops• Start/Stop of the genset by kW threshold• Programmable digital inputs (5)• Programmable static outputs (3)
ELECTRICAL PROTECTIONS (ACGEN 2.0)
• Ground protection alarm• Test active / Test failed• Battery maintenance /
Battery charger alarm• Emergency button• Feedback KG • System locked / Faulty start• Low/High frequency generator & voltage generator• Wrong phase sequence generator• Current overload / short-circuit• User alarm 1 / 2 / 3
GENERAL (ACGEN 2.0)• Date and time• CRE TECHNOLOGY or customer logo• Informations page / Events log / Active alarms page• Warranty expiry
cre autostart panels Automatic start panels - From 0 to 3200APart number: A63Z1 / ASM-ACGEN400-12/24-0 / ASM-ACGEN4XXXX-12/24-0
BATTERY CHARGES
CRE TECHNOLOGY’s range of battery chargers is designed to supply voltage to the battery with a permanent connection and a maximum of efficiency.
4 RANGES
The BP+305, Compact, BP and the BPRB series are available:• From 3A to 40A in 12VDC or 24VDC
• Single or three-phase input, all chargers support 50Hz and 60Hz• Voltage input range from 85VAC to 550VAC
PRGRAMMING
CRE MONITORThe CRE MONITOR Software is a PC Windows based Software which al-low to control, adjust and monitor the AC/IC/TCGEN 2.0 modules. Even if the AC/ICGEN 2.0 display allow to configure all parameters through its display and buttons on the front panel, this PC software offer a much easier way of programming and displaying, and allow to upload and dowload configuration files.It also offer scada features with all electrical and mechanical parame-ters available in the control module.
RELATED PRODUCT
BP + 305 RANGE
The BP+ battery chargers range offers a range of input voltages in singlephase, a range of output current from 3A to 10A and voltage output from 12VDC to 24VDC.
They integrate a permanent short-circuit protection and accept wit-hout damage the electrical starters inrush current. Their ergonomic design allows you to easily integrate it into your plant thanks to their lightness, compactness and Din Rail support.• With Diode integrated• Can be installed on DIN Rail• Competitive price
• User friendly each command with own button, own led indicator and intuitive keyboard
• History Events log (250) and data- logger• Fully programmable by keyboard• 12 month warranty• Intelligent Fast setup menu.
COMPOSITION• 1 Metal case 15/10 thick painted by epoxy powder
RAL7042• 1 Power transfer switch proposed in 2 different
solutions:- lnterlocked power contactors (25A to 160A)- or SOCOMEC change over switch (250A to 3200A)
• 1 Automatic battery charger (12 VDC or 24 VDC)• 9 Protection fuses fox auxiliary• 3 Digital outputs with relays• 2 Digital outputs with power relays for cranck and fuel• 1 Alarm Buzzer• 1 On/Off key• 3 Ampermetric transformers• 1 Emergency button• 1 TCGEN2.0 controller
ENVIRONMENT (TCGEN 2.0)• Operating temperature range: -30°C ... +70°C• Ambient protection IP55• Range VDC: 8-35 / Range VAC: 50-500• Measurements TRMS: 0,2% ±1digit• Built-in conformity to EN60439-1
SPECIAL FUNCTIONS ON BOARD (TCGEN 2.0)• Remote start/stop• Timer start/stop for programmable daily or weekly
starts/stops• SCR/EJP: remote start with group contactor closure
even if the mains is present• Start/Stop of the genset by kW threshold• Cranking/fuel valve control• Engine monitoring• J1939• Programmable digital inputs (5)• Programmable static outputs (5)
ELECTRICAL PROTECTIONS (TCGEN 2.0)• Ground protection alarm• Test active / Test failed• Battery maintenance /
Battery charger alarm• Faulty mains / Emergency button• Feedback KG / KR• System locked / Faulty start• Low/High frequency generator & voltage generator• Wrong phase sequence generator• Current overload / short-circuit• Low/High frequency & voltage mains• Wrong phase sequence mains• User alarm 1 / 2 / 3
GENERAL (TCGEN 2.0)• Date and time• CRE TECHNOLOGY or customer logo• Informations page / Events log / Active alarms page• Warranty expiry
CRE TECHNOLOGY’s range of battery chargers is designed to supply voltage to the battery with a permanent connection and a maximum of efficiency.
4 RANGES
The BP+305, Compact, BP and the BPRB series are available:• From 3A to 40A in 12VDC or 24VDC
• Single or three-phase input, all chargers support 50Hz and 60Hz• Voltage input range from 85VAC to 550VAC
PRGRAMMING
CRE MONITORThe CRE MONITOR Software is a PC Windows based Software which al-low to control, adjust and monitor the AC/IC/TCGEN 2.0 modules. Even if the AC/ICGEN 2.0 display allow to configure all parameters through its display and buttons on the front panel, this PC software offer a much easier way of programming and displaying, and allow to upload and dowload configuration files.It also offer scada features with all electrical and mechanical parame-ters available in the control module.
RELATED PRODUCT
BP + 305 RANGE
The BP+ battery chargers range offers a range of input voltages in singlephase, a range of output current from 3A to 10A and voltage output from 12VDC to 24VDC.
They integrate a permanent short-circuit protection and accept wit-hout damage the electrical starters inrush current. Their ergonomic design allows you to easily integrate it into your plant thanks to their lightness, compactness and Din Rail support.• With Diode integrated• Can be installed on DIN Rail• Competitive price