ALSO: Tax Tips + Drywall + LEED 2012 + November/December 2011 ® CONTRACTOR ADVANTAGE CANADA’S MAGAZINE FOR PROFESSIONAL CONTRACTORS COMPLIMENTARY MOULDING PLUS: INTERIOR DOORS CEILING MATERIALS
ALSO:Tax Tips + Drywall +
LEED 2012 +
November/December 2011
®
CONTRACTORADVANTAGEC A N A D A ’ S M A G A Z I N E F O R P R O F E S S I O N A L C O N T R A C T O R S
COMPLIMENTARY
MOULDINGPLUS: INTERIOR
DOORSCEILINGMATERIALS
The Hardest Working Team in the Building Industry
Nothing sells a home faster than adding cost-effective, energy-efficient insulation and weatherization products. That’s what you get when you add Dow Building Solutions to your team. Our broad portfolio of energy-efficient sheathing, housewraps, spray foam insulation and accessories is backed by 65+ years of building science experience and industry knowledge. It’s building performance you can measure – in lower utility bills for homeowners, fewer call backs and increased referrals.Find out how Dow Building Solutions can help you reach your goal for long-lasting energy efficiency at www.insulateyourhome.ca or call 1-866-583-BLUE (2583).
®™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow
™ © 2008, VANOC.
www.insulateyourhome.ca
Contents
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 3
Advertising EnquiriesVendors whose products are carried in Castle Building
Centres stores have the opportunity to advertise in
For more information or to reserve space in the next issue, contact:
Diane Jones Advertising Manager,
Phone: 905-564-3307 Fax: 905-564-6592 E-mail: [email protected]
Published and designed exclusively for Castle Building Centres Group Ltd. by Business Information Group
Material Contact: Jessica Jubb 416-510-5194
Copyright 2011
Castle Building Centres Group Ltd.,with building supply outlets in every province, is a leading supplier of lumber and building
materials to professional contractors, builders and renovators.
Publications Mail Agreement #40006677
Return undeliverable Canadian Addresses to: 100 Milverton Drive, Suite 400 Mississauga, Ont. L5R 4H1
November December 2011 Vol. 17 No. 6
Editorial Director Castle Building Centres Group Ltd.
Diane Jones
Managing EditorPaul Barker
Art Director Mark Ryan
ContributorsNestor E. Arellano David Chilton Diane Ciotta Lawrence Cummer Victoria Downing Stefan Dubowski Josh Kerbel Paul Rhodes John G. Smith
FeaturesGet Your Tax Toolbox Ready / 26It is time to get serious about the financial side of the business.
Unlocking Profit From Interior Doors / 32Design trends are opening new opportunities for contractors.
Looking Up / 38Homes today are being built with a variety of ceiling styles and materials.
Master The Mouldings / 42The right choices will deliver the perfect finishing touches for every job
Expert Panels / 4712 tips every contractor needs to know about drywall.
Will LEED Lead The Way In 2012? / 52A new version is coming and the onus on contractors promises to be huge.
38
Inside42 32
NEWS WATCH / 5 MasonryWorx releases new study
NEW PRODUCTS / 9 New and improved products
BUSINESS STRATEGIES / 16 Changing direction
SMART MONEY / 18 The three C’s of security bonding
ONLINE MARKETING / 21 Content is always king
ECONOMICS 101 / 22 Accountability increases ability
LEARNING CURVE / 25 Work together, work safe
Only an industry leader like GE could bring you a water heater that dramatically cuts your home energy costs. An effi cient
2.35 Energy Factor helps reduce water heater energy consumption up to 62%. Remarkable effi ciency and savings are what make
the GE Hybrid water heater a Natural Born Leader. To fi nd out how it works and where to buy, visit geappliances.ca or call 1-855-742-6112.
*Based on DOE test procedure and comparison of a 50-gallon standard electric tank water heater using 4881 kWh per year vs. the GE Hybrid water heater using 1856 kWh per year.
The GE® Hybrid water heater uses innovative technology to save you $320 a year* without costing you a single drop of hot water.
Natural Born Leader
MVPAWARDMOST VALUABLE
PRODUCT 2010
67896_hybrid_ad_mabe.indd 1 9/30/11 10:39 AM
News Watch
A survey on new home buyer preferenc-es shows that 89% of Ontario new home shoppers prefer a house made of brick or stone, but most also believe it is the most expensive option.
The idea that opting for a masonry exte-rior is vastly more expensive is a myth poten-tial homebuyers should see past, says Mason-ryWorx President Dante Di Giovanni.
MasonryWorx is the trade association of brick, block and stone masonry industry profes-sionals.
“Building your new house out of brick versus vinyl, for example, adds only 2-4% to the cost of the house,” he said.
Manny Brilant, senior design manager at Greenpark Design and Project Manage-ment, says that, “the majority of our purchas-ers have continually shown their preference for brick and stone because it is available in a broad range of colours, easy to install, rela-tively maintenance-free and durable.
Also, because brick and stone tend to hold their value well, the home is easier to re-sell.”
North American real estate professionals estimate that a brick home has a resale value 6% higher than homes built with alternative exterior materials; compensating for the ini-tial investment in a masonry home.
The survey also revealed that 78% of new homebuyers put energy efficiency of their home as a top priority.
A computer simulation by the National Association of Homebuilders found that ma-sonry buildings are 12-17% more energy effi-cient than other traditional building materi-als, even when the R-value of the building is 30% higher than industry standards.
“These are the tangible costs,” said Di Giovanni. “What the numbers do not show are the additional quality of life benefits of building with masonry, less street noise from neighbours combined with the greater peace of mind that comes with improved fire resistance.
“With small lot sizes and houses being built closer together than ever before these benefits cannot be overlooked.”
The new homebuyers survey, commis-sioned by MasonryWorx, was conducted by Redfern Research and Pollara Strategic Insights to gauge consumer attitudes and awareness of masonry products.
The study was conducted using The Pollara Townhall, Pollara’s online panel of more than 250,000 Canadians, recruited from random-digit-dial telephone surveys.
MasonryWorx membership includes
product manufacturers, suppliers and skilled professionals from across Ontario.
Sally Moore, its executive director, said the survey was conducted because there was a lack of information about what home owners require when it comes to the exte-rior cladding of their home.
“There are opportunities for contrac-tors,” she said. “The more knowledge you have the better you are going to be.”
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 5
Study reveals merit of masonry built homes
PHO
TO: T
HIN
KSTO
CK IM
AG
ES
Sico and CIL Paints have announced their new colour palettes and décor trends of 2012 with an eye on individuality.
According to Sico, social media net-works are driving consumers to be more expressive than ever before, while en-vironmental issues remain a key focus of homeowners. To that end the com-pany developed three prevailing colour trends its researchers see in demand in 2012: living scrapbook, one small seed and delicate mix.
Inspired by sites such as Facebook and personal creativity, Living Scrapbook focuses on balance, and warm colours. It features contemporary colours such as Sico’s Ming Red, sky blues like Santorini, Olive Chartreuse and yellows such as Star Coral for a modern but non-mainstream look. One Small Seed uses garden greens like Sico’s Namian Desert, dark browns like Pen and Ink and pastel blues like Lu-nar Month in order to highlight the con-nection between homeowners and the natural environment.
Delicate Mix, the company says, is focused on creating subtlety, stillness, harmony and balance in turbulent time. It focuses on neutrals, pinks and subtle mauves, like Sico’s Grey Drizzle, Satie White, Frangipani and Furtive Mauve.
Meanwhile, CIL Paint says the hottest colour of 2012 will be red. Depending on what it is combined with, red will create either a reassuring or edgy feel, be soft or bright and warm or cool, the company says.
The company says “daring to be differ-ent” is the dominant theme for its 2012 paint palatte, featuring the combination of hushed pastels and edgy bright colours, including: oranges (CIL’s Cinnibar), yel-lows (Golden Ember), greens (Calypso Green), blues (Lakemont), violets (Purple Haze) and neutrals (like Silver Quill or Sandringham).
“The 2012 colour palette is all about possibilities,” says Alison Goldman mar-keting communications manager for CIL Paints. “The more people get com-fortable in their own skin, the more con-fidence they have to experiment with co-lour and the diverse and flexible palette of the coming year is the place to start.
6 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
News Watch
Housing starts are predicted to remain steady in 2011 and 2012, according to the third quarter Hous-ing Market Outlook, Canada Edition from Canada Mortgage and Housing Corporation (CMHC).
Although strong in the past few months, housing starts are expected to moderate closer in line with demographic fundamentals, accord-ing to Mathieu Laberge, deputy chief economist at CMHC. Still, Laberge presents a positive outlook: “Despite recent financial uncertainty, factors such as employment, immigration and mortgage rates remain supportive of the Cana-dian housing sector.”
In 2011 the CMHC forecasts housing starts will be in the range of 166,300 to 197,200 units, with a point forecast of 183,200 units.
In 2012, the organization predicts housing starts in the range of 161,700 to 207,200 units, with a point forecast of 183,900 units.
Meanwhile, existing home sales will be in the range of 425,000 to 472,500 units in 2011, with a point forecast of 446,700 units. This is essentially the same as 2010. MLS (Mul-tiple Listing Service) home sales are expected to improve modestly in 2012 to the range of 407,500 to 410,000 units, with a point forecast of 458,000 units.
The first half of 2011 saw an increase in MLS prices, in part due to higher-end homes being sold. For the remainder of 2011, CMHC expects prices to moderate, but overall 2011 prices will show an increase over last year. In 2012, prices are expected to be more modest as existing home markets become more balanced.
Meanwhile for the month of August, The seasonally adjusted annual rate of housing starts was 184,700 units, down from 204,500 units in July 2011.
“Housing starts in August were in line with current demographic fundamentals and are consistent with CMHC’s recent Housing Mar-ket Outlook,” said Laberge. “Housing starts de-creased in all regions, except the Prairies with the decline being more pronounced in the mul-tiples segment.”
The seasonally adjusted annual rate of urban starts decreased by 10.2% to 165,800 units in August. Multiple urban starts were down by 15.5% to 101,400 units, while urban single starts decreased by 0.3% in August to 64,400 units. August’s seasonally adjusted an-nual rate of urban starts decreased by 41.4% in the Atlantic region, by 15.3 % in British Colum-bia, by 11.8% in Ontario and by 8.8% in Quebec, while urban starts increased by 9.4% in the Prairie region over the same time period.
Housing market to remain steady in 2012
Housing market to remain steady in 2012
Colour:
Trim Size:
Safety/Live:
Bleed:
Media:
Client:
Ad #:
Publication:
Month/Index:
Pub Close:
Date Final:
Prepared By:
Owens Corning
-
Contractor Advantage
Sept/Oct 2011
-
August 12, 2011
Chris Straus
8.125 x 10.875”
.5”
.1875”
Magazine
CMYK 08/10/11Copywriter:
Proofreader:
Art Director:
Cre Director:
Account Exec:
Production:
Proj Manager:
-
John Meadwell
Chris Straus
Brian Meadwell
Kelly Straus
John Meadwell
Kelly Straus
Date:
Ad
Info
rmat
ion
Prin
t In
form
atio
n
Han
dle
r In
form
atio
n
Docket #: OCC-0214-11 Filename: OCC-0214-11_ContAdvantAd_FOAM
Meadwell 4310 Sherwoodtowne Blvd. Suite #302 Mississauga, ON L4Z 4C4P. 905-897-1717 F. 905-897-1625
Creative Approval Proof Final
Client Section Picture CopyAll content, claims, errors and omissions and associated liability are the responsibility of the client after the work has been proofed and signed.
OK/No Change OK/No Change
OK/w/ Marked Changes OK/w/ Marked Changes
Sign: ____________________ Date: ____________________
Account Director Sign: ____________________ Date: ____________________ Comments: __________________________
Account Manager Sign: ____________________ Date: ____________________ ______________________________________
Production Manager Sign: ____________________ Date: ____________________ ______________________________________
Graphic Designer Sign: ____________________ Date: ____________________ ______________________________________
1-800-GET-PINK® or visit www.owenscorning.ca
ExcEptional pErformancE, a grEEnEr planEt. that’s pink™.
today, contractors, builders and homeowners expect more from their
insulation. that’s why we created foamUlar® rigid insulation. it has
the same trusted insulating performance that your customers have
come to expect from owens corning, while providing exceptional
moisture resistance and durability. Versatile in its application, it exceeds
all green expectations with its outstanding energy efficiency. so go
green and stock pink™.
Why choose FOAMULAR® Insulation?
• Complies with 2010 Montreal Protocol – CFC- and HCFC-Free
• Zero ozone depletion potential• 70% less global warming potential†
• Minimum 20% recycled content
Contact your Owens Corning Area Sales Manager to find out how PINK™ can make a positive impact on your business.
ZERO
OZONE
DEPLETION
FORMULA
FORMULE À
APPAUVRISSEMENT
DE L’OZONEZÉRO
thE pink panthEr™ & © 1964-2011 metro-goldwyn-mayer studios inc. all rights reserved. the colour pink is a registered trademark of owens corning. © 2011 owens corning. all rights reserved. †the insulation is manufactured with a blowing agent with 70% less global warming potential as compared to owens corning previous blowing agents. grEEngUarD children & schoolssm mark is a registered certification mark used under license through the grEEngUarD Environmental institute. owens corning pink™ insulation is grEEngUarD certified for indoor air quality, except bonded loosefill products. © 2011 owens corning. all rights reserved.
OCC-0214-11_ContAdvantAd_FOAM.indd 1 11-09-28 11:22 AM
“Simply enjoy life!”
This may very well be the last roof you install if you choose Ideal Roofi ng’s new long-life Wake-fi eld Bridge steel roofi ng shingles. They come in 12 designer colours and are guaranteed 50 years.
Steel will resist winds of up to 194 km/h (120 mph) and will not rot, warp, crack, break, chip, peel and perforate and will last so much longer you may not need to reroof again in your lifetime. Ask your dealer about our 50-year limited warranty and have no fear of rain, ice, hail, sleet, snow, wind, sun, frost and even burning embers from forest fi res. Simply enjoy life.
Ideal Roofi ng’s New Long-life Steel Shingles
Integrated nailing strip
12’’
38 7/8”
1 866 842-6288 | www.wakefi eldbridge.com
+
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 9
New Products
+Innovative Products for Today’s Renovators
Building Blocks
+COMPOUND MITRE SAW CONTAINS NEW BATTERY PROTECTION SYSTEMThe Makita 7-1/2” Cordless Dual Sliding Compound Mitre Saw (model #LXSL01Z) is lighter and more portable than full-sized cord-ed versions, and uses the same batteries and charger as other 18V LXT tools from Makita.
A new battery protection system provides over-discharge, temperature and current production to enhance performance, bat-tery cycle life and overall battery life, while an electric brake increases operator safety. The saw’s dual-sliding rail mechanism incor-porates six linear ball bearings for more pre-cise adjustment free cuts, and an ergonomic soft rubber grip absorbs vibration and makes usage more comfortable.
The saw has a mitre capacity of 47° left or 57° right with positive stops at 0°, 15°, 22.5°, 30° and 45°. It has a bevel capacity of 45° left or 5° right. It weighs 11.8 kg and uses an 18V Li-Ion battery.
DRYWALL SCREWDRIVER IS LIGHTWEIGHT YET POWERFULMakita’s new Pistol Grip Cordless 18V Drywall Screwdriver is lightweight, ergonomic and quiet, and works with batteries and chargers from other LXT tools.
The screwdriver incorporates the company’s battery protection system to prevent over-discharge, protect against temperature and current, and improve battery perfor-mance and life. A silent clutch offers smoother engagement of gearing to improve du-rability and increase efficiency, while a variable speed trigger allows operators to adjust driving speed based on materials or applications.
Available with two batteries, charger and carrying case (model #LXSF01) or only as the tool (model #LXSF01. This 1.7 kg screwdriver features a one touch locator for quick and easy bit changes, LED job light and ergonomic soft rubber grip to reduce vibration and increase comfort during use.
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 11
New Products
DEWALT LAUNCHES NEW LINE OF METAL CUTTING RECIPROCATING SAW BLADES The 2X Longer Life Reciprocating Saw Blades from DeWalt are designed to cut through the hardest metals. Featuring a wide, thick design for better dura-bility, these blades use an innovative coating process to increase their life and a variable pitch design for effi-cient cutting performance.
They are ideal for professionals tasked with work related to plumbing, mechanical and HVAC, demolition, electrical and general contracting, says the manufacturer. To improve durability, the new blades have an increased height and thickness than standard DeWalt blades, measuring 1” tall and 0.042” thick. DeWalt has also redesigned its Precision Framing Blades to improve blade control and durability. It has incorporated a new anti-kickback shoulder to help reduce the risk of saw kickback.
The manufacturer says these new blades are ideal for framing, roofing, siding installation and concrete forms.
DeWalt’s 2X Longer Life Reciprocating Saw Blades are avail-able in 6”, 8” and 12” lengths, while the new Precision Framing Blades are available in 6-1/2”, 7-1/4” and 8-1/4” diameters.
+
+GE GEOSPRING HYBRID WATER HEATER SAVES BOTH MONEY AND ENERGYTo create the next generation of water heaters, GE says it rethought every aspect of the appliance from the ground up.
The result is a new product that according to the company can reduce water heater oper-ating costs by up to 62% and save the average household $320 annually.
The GeoSpring hybrid electric heat pump water heater contains technology that is de-signed to absorb heat in ambient air and transfer it into the water. The tank portion of the ENERGY STAR qualified appliance includes two electric heating elements, a pressure relief valve, an internal porcelain-lined tank and an anode rod.
A compressor and evaporator are integrated into the electric water heater unit and the evaporator draws in ambient heat from surrounding air using two variable speed fans.
Other features include a user-friendly control system located at eye-level to eliminate the need to bend down to the floor to adjust temperature settings.
ROYAL ESTATE L I M I T E D L I F E T I M E P R E M I U M A R C H I T E C T U R A L S H I N G L E S
Colour featured is Taupe Slate
Majestic and refi ned; bring luxury to your home with IKO’s new Royal Estate shingles.
Royal Estate is a perfect example of how engineers have combined IKO’s patented colour blending technology with their proven manufac-turing process to create a premium product that protects your home from the elements and offers the sophisticated look of natural slate tiles.
Royal Estate shingles are designed to offerhomeowners exceptional beauty, durability and value. They’re available in four natural-stone colors: Shadow Slate, Mountain Slate, Taupe Slate and Harvest Slate. All have algae-resistant granules embedded into the surface layer to keep Royal Estate roofs looking spectacular, year after year making this a lasting investment.
For additional information on our full line of premium roofi ng products please call: Eastern Canada 1-888-766-2468, Western Canada 1-800-661-1034, or visit our web site at: www.iko.com
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 13
+
DUCHESNE DBE-ECO REFLECTIVE INSULATION IS ECO-FRIENDLYDuchesne has announced a new line of insulation, which is the only eco-friendly reflective insulation on the market.
DBE-ECO reflective insulation is available in two sizes: 48” x 125’ and 96” x 125’. The polyethylene film, the main component material, contains over 50% recycled materials. In addition to be-ing environmentally friendly, DBE-ECO offers equivalent perfor-mance to standard products and can be used in attics, walls, water heaters, crawl spaces, as well as to replace other products of the same composition.
DBE-ECO is part of Duchesne’s ECO-ID program, offering eco-friendly products to meet the demands of environmentally-respon-sible consumers.
New Products
LAFARGE PLC CEMENT DESIGNED TO REDUCE CARBON FOOTPRINTLafarge recently introduced a new port-land-limestone cement (PLC) that the company says provides performance similar to conventional portland cement, but with up to 10% less carbon emissions.
The cement has been approved for use by the Canadian Standards Association, the National Building Code of Canada, and the Building Codes of B.C., Ontario and Quebec, and PLC has been widely used in Europe for over 25 years. The new cement from Lafarge offers similar perfor-mance, workability, set time and durability to regular portland ce-ment. The company will be transitioning to PLC this year.
The company’s plants in Richmond, B.C. and Bath, Ont. are expected to reduce CO2 emissions by 160,000 tonnes annually by making this change, which is equivalent to taking 30,000 cars off the road. In addition, it intends to combine other concretes with PLC to create further opportunities to reduce carbon footprint.
+
HEALTHCARE SCHOOLS FOOD SERVICEHOME RENOVATIONS OFFICES
DUST CONTROL™ Drywall Compound by CGC is the first and only joint compoundto reduce airborne dust.
Dust Falls Straight to the Floor!Introducing DUST CONTROL™, a revolutionary new drywall compound by CGC. DUST CONTROL™ is thefirst and only drywall compound engineered tosignificantly reduce airborne dust from sanding.It is ideal for those jobs where protection fromdust infiltration is crucial such as homes, schoolsand office environments. With DUST CONTROL™
Drywall Compound, dust falls straight to the floor, making clean-up faster and easier than ever.
The CGC logo and DUST CONTROL are trademarks of CGC Inc.
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 15
New Products
+ROXUL LAUNCHES NEW WALL SYSTEM, EXPANDS COMFORTBATT LINE Roxul Inc. has launched a new lineup of ComfortBatt products de-signed for steel stud construction and introduced a new wall system, which it says offers higher energy efficiency, sustainability, and bet-ter overall durability and performance.
The ComfortBatt steel stud products are available in R10, R14, R22.5 and R24 values and are part of Roxul’s new wall system that uses ComfortBatt insulation in the metal stud wall and CavityRock insulation in the cavity.
The wall system includes a thick batt of Roxul thermal insulation in the stud wall (up to 6”), combined with a high density, semi-rigid insulation board (up to 5”) in the external cavity.
The thermal value of Roxul insulation does not change over time, as stone wool is not produced with blowing agents, which off-gas and result in lower thermal performance. As a result it does not sag in the wall cavity, leaving gaps around the perimeter, or perma-nently shrink.
Moulding Millwork
Business Strategies
BY VICTORIA DOWNING
Victoria Downing is president of Remodelers Advantage Inc. and is a leading authority in the remodeling industry. She has authored and co-authored several industry books, including The Remodeler’s Marketing PowerPak. She can be reached at [email protected] or by phone at 301-490-5620 ext. 105.
16 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
There is a reason why some are able to successfully transform their business practices and others cannot.
Changing Direction
At Remodelers Advantage, we work with hun-dreds of remodelers to help them improve the performance of their business. We share the tools that we know, from years of experience, will definitely make a difference in productiv-ity, profitability and overall work satisfaction.
Some of our clients grab hold of this ad-vice, change systems, priorities and behaviours, and sprint forward seeing very positive results.
Others, hearing the same advice, just are not able to make the changes that could, very possibly improve their lives. They may try for a few months, but many, after six months, have not taken the steps that are so important to them and their families.
Why are some able to make important changes to their business practices and oth-ers are not?
The answer may be in a new book from the authors of two of my other favourite business books, Crucial Conversations and Crucial Confrontations.
The new book, Change Anything: The New Sci-ence of Personal Success by Kerry Patterson, Joseph Grenny, David Maxfield, Ron McMillan and Al Switzler, is a compelling read that quickly identi-fies a large reason that
many people fail in their attempts to change: we rely on
willpower alone.They say, “When people believe that
their ability to make good choices stems
from nothing more than their willpower, and that willpower is a quality they are either born with or they are not, they even-tually stop trying altogether. The willpower trap keeps them in a depressing cycle that begins with heroic commitment to change, which is followed by eroding motiva-tion and terminated by a relapse into old habits. When the pain of their bad habits becomes intolerable, they muster up another heroic but doomed attempt at change.” They believe that our abil-ity to make the right choices is influenced, positively or negatively, by six main elements and that if we can learn to “see” those sourc-es of influence, we can manipulate them to help us reach our goals. The authors
categorize these important influencers in the following categories and provide us with logical strategies to use on each:
• Personal Motivation: personal desire to make the change happen.
• Personal Ability: the skills and informa-tion you may need.
• Social Motivation and Social Ability: the influence of friends, co-workers and family.
• Structural Motivation: the influence of incentives.
• Structural Ability: the space around you.
The authors say, “…when it comes to changing ourselves, it is best to use strate-gies from each of the sources of influence, especially those that are currently working against us. If we do not, we will be outnum-bered and out of luck.”
So the first step: Take a look at your life and think about the crucial moment when you made a bad decision. Try to determine
Business Strategies
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 17
which of the six sources was influencing you at that moment.
Pinpoint your problem areas and then use the simple but breakthrough tactics provided.
Let us take a quick look at the tactics in two main categories.
Source 2, Personal Ability:The authors believe that one source of influ-ence is our personal knowledge or skill and that a good cause of failure to change our behaviour is simply a lack of it.
They suggest that the first step in over-coming this negative influencer is to do a “Skill Scan” to determine what knowledge you may be lacking that would help you change. You may be surprised at the educa-tion or training you need.
Secondly, use deliberate practices to put the skills you are learning into place. Instead of talking, talking, and talking about the
issue, make a conscious effort to use the skills in real life. The more that the change skills are used; the easier it will be to use them when a crucial moment that tempts you away from your goal occurs.
Source 5, Structural Motivation:In this chapter the authors suggest that us-ing the right kind of incentives can have a significant impact on changing behaviour and they suggest a strategy of inverting the economics; developing an incentive that would charge for bad behaviour instead of rewarding for positive.
They use a study from Daniel Kahneman, a behaviour economist, to demonstrate that we humans “have a bizarre quirk hardwired into us. That is, we are far more motivated to avoid loss that we are motivated to receive an equivalent gain.”
The authors suggest that an incentive
to get ourselves to change is to put some-thing you care about at risk. For example, if money is important to you, put up $2,000 as an incentive to make a change.
For example, if your goal is to complete estimates within four days of the client meet-ing, then each time you miss this goal, $500 will be given to a political party that you oppose.
Another tactic to improve structural moti-vation would be to reward small wins; focusing on the actions you are taking, not the results that you achieve. “Results are often out of your control (at least in the moment), so link your incentives to something you can control.”
By breaking down the various elements that can push us away from a goal, or pull us closer, the authors show us that willpower alone will rarely be enough. By using practical tactics from all six sources of influence, we can succeed in changing our behaviour, changing the results we see and changing our lives.
Vicwest Residential Steel Roofing Vicwest supplies a wide range of residential steel roofing complete with coordinating trims, fasteners, closures, caulking, flashings and non-slip underlayment. Vicwest residential steel roofs are quickly becoming the choice among builders and homeowners. Vicwest is helping roofing contractors grow their business with proven steel systems, with larger coverage areas for quicker installation, warranties of up to lifetime, installation manuals and training also available. Ask your local Castle Building Supply Centre or visit us on the web.
www.vicwest.com
Granite Ridge
UltraVic
Prestige
SuperVic
VicElite
Got a SmartPhone?
Scan here or visitour website
Smart Money
Paul Rhodes is a partner at Soberman LLP. His professional experience includes construction, manufacturing and real estate and internal audit engagements. Paul is a member of the Toronto Construction Association.
18 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
BY PAUL RHODES
Bonding is a key part of the Canadian construction industry and contractors should understand the criteria for obtaining it.
The Three C’s Of Security Bonding
The criteria for obtaining surety bonding are often summarized as the business own-er’s (or the principal’s) capacity, capital and character. Satisfying the bonding company on each of these points is required to obtain and maintain a bonding facility. This article will review the meaning of each of these terms, and describe how they can be mea-sured and assessed.
Capacity: Capacity refers to the contractor’s ability to perform the current or planned level of work. Therefore the company must have in place sufficient systems and infrastructure, including management with the required knowledge and experience.
The information collected will allow the bonding company to assess the current level of work. The contractor’s current work-load is summarized in the “Work on Hand” schedule, which provides the following in-formation on a contract-by-contract basis for both bonded and non-bonded projects at a point in time:• the adjusted contract price• the amount billed to date, including hold-
back costs incurred to date and the esti-mated cost to complete
• estimated gross profit at the time of bid and the current estimate of gross profit; and, an anticipated completion date
In addition to the “Work on Hand” re-ports, the underwriter may also consider the company’s internal controls over job costing.
The contractor must ensure that the company’s information system is able to
generate this information at any point in time, in order to support a bonding applica-tion and ongoing reporting once the bond-ing facility is in place. The information re-quested will also include the completion of a questionnaire and may include a business plan, especially if the business owner intends to increase the scale of the business.
Other information obtained will include:• annual financial statements, usually for the
past three years, together with aged listings of receivables and payables
• the most recent internal financial state-ment with aged listings of receivables and payables
• a “Work on Hand” schedule for the most recent completed year end and for the internal financial statement a copy of the bank facility letter describing the terms and conditions personal financial statements for all shareholders; and other relevant infor-mation, such as: an organization chart and resumes of key employees, succession plan, a company brochure and references
Capital: Construction is a capital intensive business and the underwriter will be looking for ad-equate working capital available to the com-pany to finance the current and the desired future work program. An excellent credit rating and an established relationship with a bank will also be required.
It is also beneficial for the principal to have an independent accountant who is familiar with the industry and with bonding company requirements in particular. This is because the accountant has to be aware
Smart Money
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 19
of the capital requirements of the bonding company that must be met. For example, adequate profit should be left in the compa-ny to provide this working capital, and there-fore, the independent accountant should not be recommending withdrawal of profit or surplus cash for tax or other reasons.
The underwriter will need to understand the company’s growth plans, including the size, type and location of jobs and the aggre-gate levels of work as well as details of how this growth will be funded.
Character: The bonding application process involves the broker submitting an application tailored to the specific requirements of the bond-ing company underwriter. The underwriter will consider the contractor’s entire business and will have to be satisfied that the business is well-managed and profitable and that the
contractor keeps promises, deals fairly and performs obligations in a timely manner.
As an example, the principal’s ability to estimate the profit margin on projects at the contract award stage and as a project progresses (per the Work on Hand report) enables the bonding company to assess the principal’s management experience; how-ever, over a period of time it also enables the bonding company to develop the trust nec-essary in the principal’s judgment.
The application questionnaire is a key part of this test. On an ongoing basis the bonding company will be monitoring the principal to ensure that communication is open, that they deal fairly and can be trust-ed. Related to this, is the trust the bonding company has in the independent accoun-tant, relating to both the quality of financial reporting and the opinion that is rendered on financial statements.
Bonding companies also request personal guarantees of the principal, which are an indication of the principal’s charac-ter, because a business owner who gives a guarantee has a vested interest in working out issues and resolving problems.
Bonding is a long term venture and a key part of the Canadian construction indus-try, which supports a significant volume of project work. The application process and the ongoing disclosure requirements act as a pre-qualification service for the principal and provide the project owner with some as-surance over the principal’s capacity, capital and character.
This article has been prepared for general infor-mation. Specific professional advice should be ob-tained prior to the implementation of any sugges-tion contained in this article.
TASK TOOLS • East 1.800.268.2304 • West 1.800.663.0160 • www.task-tools.com
T24701-T24757
CirCuLAr SAW BLAdES• Premium 10" and 12" blades for table saws, mitre saws, and radial arm saws• run-out tolerance guaranteed to be less than 0.100 mm or 0.004"• Micrograin C4 Tungsten Carbide Teeth• re-sharpenable
SuPrEME ACCurACyThe runout tolerance of a T SK Signature® circular saw bladeis so precise that we can’t print on its surface; the thickness of the ink would put the blade out of tolerance.Key specifications are laser etched instead.
THE T SK SiGNATurE® COMMiTMENTT SK Signature® products are guaranteed to be as good or better than any competing products currently available in the markets T SK® serves.
Go to your nearest Castle Building Centre to get yours today!
BY JOSH KERBEL
Josh Kerbel is Managing Director of Sales Funnel, a digital marketing agency that specializes in lead generation and prospect management systems. To get a copy of the free white paper, 8 Steps to Internet Marketing Success, please send an email to [email protected].
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 21
Online Marketing
Focus first on building a site that continuously attracts your potential customers and the sales will follow.
Content Is Always King
You know that you do it all the time when you research a new purchase. Maybe it is a new car, TV or accounting software, but the process is usually the same. You spend a good chunk of time looking for a website or two that seems to be a fountain of relevant knowledge; a site loaded with all the infor-mation needed to make an intelligent pur-chase decision. It has product research and background information on development of the product. It has user reviews and inter-views with product designers and creators. It is so comprehensive that it almost takes your credit card out of your wallet and punches in the numbers for you.
Is your company’s site this helpful? Are you making it this easy for your pros-pects to research your products? Are you too afraid that even mentioning the com-petition on your site leads you on a path to losing sales. Whether you are a new home builder, architectural software provider or manufacturer of crown moulding, your prospects are almost always going to do a bit of pre-purchase research and will know who your competitors are regardless of whether or not you tell them. Your company can take advantage of this by using your site to position your product offering in the most favourable light relative to its competition. This is your opportunity to dictate the mes-sage that your prospects receive at a time when they are most attentive.
Now that you have got over the fear of
mentioning your competition, how do you build an information resource that gener-ates sales leads and builds a solid reputation for your firm?
This is not just about gathering a lot of links together on your site. You need to com-mit resources to curating the information for the site and then how you are going to promote this new initiative, if you are going to be successful.
The six steps to building a killer online resource for your prospects are:
Think community: Your goal is building a community around your Website. You must know your audience and understand what they are interested in.
Consistency: The key to the success of any marketing effort is not in the details, it is in the execution. If you want to build a resource, you need to add to it on a regular basis. You cannot just stop once you have started.
The riches are in the niches: Chances are that your customers have already come
across sites out there that cover a broad swath of semi-relevant topic areas but do not take the deeper dive that your site is going to offer. The only way to attract readers away from these sites is to offer an experience that is laser focused on one specific topic
Context counts: Following along the niches theme, the information you assemble must create a specific context for your reader. You
must talk to your customer in a frame of ref-erence your prospect can relate to and show your prospect how your product offering is important in the larger context. Your busi-ness cannot be all things to all people. Build your site by focusing on one segment of your overall market and expanding from there. Become the industry resource: Do you want to keep drawing visitors? Then estab-lish your site as “the place” where industry professionals head when they are looking for information. Make sure that you are known by other industry players as the cen-tral hub of information. If it is good enough for professionals, then it is good enough for the general public.
Commerce follows content: Focus first on designing a usable reader experience and then worry about monetization. Peo-ple will not give you their money if they are not willing to give you their time and atten-tion first.
This is not just about gathering a lot of links together on you site. You need to commit resources to curating the information for the site.
Economics 101
Diane Ciotta, the founder of The Keynote Effect, is a professional speaker with more than 20 years of sales training experience and the co-author of the book, “Pushing to the Front,” with Brian Tracy. She can be reached via e-mail at [email protected] or by telephone at 732 672-7942.
22 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
BY DIANE CIOTTA
Effectively motivating employees to be more accountable improves both results and attitudes.
Accountability Increases Ability
Are you working hard or hardly working? This question often gets a chuckle. Unfor-tunately, it is less humorous today, since it has become increasingly more difficult to find hard-working help. Many employers are challenged daily by the frustration of lacka-daisical attitudes of their personnel, which is seemingly contagious and complicated by the expense of constant turnover.
One corporation in particular was crip-pled with what could be called a ‘stress-leave epidemic.’ It began when one sales execu-tive complained to their human resources department that they were under too much pressure to reach their sales goals and con-sequently their doctor recommended they take some time off for health reasons.
The company policy granted six weeks, which coincidentally (and conveniently) started the week before U.S. Thanksgiving and ended just after the New Year.
This person’s absence increased the re-sponsibilities of the other team members to service that employee’s current customers, which in turn resulted in a domino effect of more so-called necessary stress-leave cases.
As if the impact of this cancerous situation was not bad enough, every position was re-quired to be held and in each case, entire com-missions were paid to the original sales person. To add insult to injury, the first offender of this crisis, invited all of their co-workers to a holiday party that admittedly was planned as a result of not working, as it provided adequate time to prepare for such an affair.
The company’s policy could be con-sidered problematic, but in legitimate
situations and when not abused, the benefit opportunity is quite generous. It is the mis-use of the plan that is extremely disturbing and the lack of conscience on the part of the abusers that is inexcusable.
The most puzzling factor in this scenario is that considering the current state of the economy and the unemployment rate at an all-time high, it would seem that people should be grateful to be employed and therefore perform above and beyond the call of duty to maximize their earnings and secure their position.
Instead, the opposite is often true. Many choose to ‘hardly work’ and some even find ways to ‘work the system’ and essentially not work at all.
Can accountability really be taught? Granted, a small child can certainly learn to take responsibility for their own actions through positive example and consistent
discipline. On the other hand, a person of working age needs encouragement as op-posed to training.
Effectively motivating employees to be more accountable stimulates an optimistic
focus on both results and attitude. There are several ways to establish a comfortable, non-complacent environment, including:1. Focus on coaching vs. managing. Too of-
ten management operates by means of in-timidation rather than motivation. Just as customers are more inclined to buy from people they like, employees will typically work harder for a boss they respect more than fear. Coaching is the art of showing, not just telling. In addition to building better employer-employee relationships, learned skills encourage a more commit-ted focus than just dictated tasks.
2. Set challenging, yet attainable expecta-tions. Being stretched promotes growth, but being overwhelmed causes anxiety. Finding a balance between requiring re-sponsibilities that are progressive without being incredulous will enhance account-ability and confidence.
Can accountability really be taught? Granted, a small child can certainly learn to take responsibility for their own actions through positive example and consistent discipline. On the other hand, a person of working age needs encouragement as opposed to training.
Economics 101
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 23
3. Provide incentives for productive activity in addition to end results. Rewards given for reaching a goal or completing a duty are great, but there are benefits to recog-nizing effort as well as accomplishment. To acknowledge a positive action through incentives is a subliminal way of encour-aging productive behaviour. Activity becomes habit and affirmative results increases conviction.
4. Dedicate time in department meetings
to recognize excellence. Team meetings typically cover “housekeeping items” that could be easily communicated through email. Instead, using this forum as an environment to edify activity, rather than to cover mundane information, offers a terrific opportunity to recognize accom-plishment in areas of attitude and activity. The impact is two-fold. To hear praise is
terrific, but to be praised in front of asso-ciates is awesome, while it subconsciously raises the expectation bar.
5. Commit to replacing complacent behav-
iour. Neither party is doing the other a favour by hanging on to something that is not a good fit. In many cases, a decision to terminate an inadequate performer results in a better outcome for both people. The terminated em-ployee finds something more appro-priate for their professional needs
and the employer fills their position with someone much more qualified for the requirements of the position.
There is no advantage in the associa-tion between an unfulfilled employee and a discontent employer. In an effort to gain a mutually beneficial working relationship, commit to being accountable, then encour-age and expect accountability and take the necessary action when either is missing from the equation. The result will offer a return on investment for both parties.
It is the misuse of the plan that is extremely disturbing and the lack of conscience on the part of the abusers that is inexcusable.
Contractor AdvantageIn the next issue of
• Lumber Trends 2012
• Millwork
• Gypsum Advances
• New Insulation Trends Innovations
• Ceilings
• Building Green Business
JOBSITES TODAY DEMAND TOUGH, RUGGED, RELIABLE TOOLS.
INTRODUCING A LITHIUM ION SYSTEM OF HIGH PERFORMANCE CORDLESS TOOLS DESIGNED TO DOMINATE TODAY’S JOBSITES. STEP UP TO THE NEXT LEVEL and TOUGHEN UP TO THE MAX.
Copyright ©2011 DEWALT. The following are examples of trademarks for one or more DEWALT power tools and accessories: The yellow and black color scheme; the “D”-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
* Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.** vs. leading 18 Volt lithium ion tools.
MAXIMIZED POWER.
MAXIMIZED RUN-TIMES.
MAXIMIZED DEWALT.
up to 57% faster**
up to 35% more runtime**
/20VMAX
P A R T O F T H E
DEWALT_20VMAX_FllPgAd.pdf 1 9/23/11 2:18 PM
+
+
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 25
Learning Curve
In the first instalment in the new Contractor’s Edge series, Delmar has introduced Jobsite First Aid: A Field Guide for the Construction Industry, which provides information to bet-ter prepare contractors, construction workers and other jobsite personnel for possible emergency situations.
According to Greg Clayton, vice president of technology profes-sional business unit at Delmar, the construction industry accounted for more fatal work injuries in 2010 than any other industry, demon-strating the importance and need for workers to be knowledgeable in first aid best practices.
The time between when an accident happens and when emer-gency responders arrive is critical.
The book provides a clear, systematic approach to safety training for
everything from minor burns to life-threatening events. It details spe-cific methods to follow during an accident in order to go above and beyond basic first aid treatment. The reference guide presents detailed preparedness information that companies can use to help prevent and divert jobsite accidents, as well as the steps to recover control of the job-site after an accident and return to business.
Author Dan Johnson is an experienced Environmental, Health and Safety (EHS) professional and designer of EHS programs for a wide range of industries. He provides first aid concepts in a real-world context through specific jobsite and contractor references. To improve compre-hension, procedures are accompanied by detailed illustrations, images and “how-to” descriptions of various tasks.
Jobsite First Aid is designed to be a quick reference that can fit into any toolbox, glove box or desk drawer for easy access, and is made from durable laminated materials to endure the hazards of a construction site. Both books are currently available from www.amazon.ca and www.chapters.indigo.ca.
JOBSITE FIRST AID: A FIELD GUIDE FOR THE CONSTRUCTION INDUSTRY Delmar (Cengage Learning)
Two guides outline best practices for collaboration in the construction industry, and first aid and safety on the job site.
Work Together, Work Safe
An effective collaboration strategy based on the implementation of information systems and careful consideration of organizational is-sues is the key to successfully delivering construction projects.
That is the crux of Collaborative Working in Construction from Spon Press. The book provides clear explanations on how to success-fully devise and implement a collaboration strategy in today’s com-petitive world of rapidly developing communication technologies.
The book introduces collaborative working as a holistic concept in construction; a new framework on planning and implementing effective collaboration; and, change management approaches for introducing collaborative working systems and implementing new technologies in construction projects.
Chapters look at key concepts, the impact of mobile and wireless technolo-gies, multi-disciplinary collaborative de-sign and construction, case studies and techniques for building a change man-agement framework.
Editor Dino Bouchlaghem, professor of architectural engineer-ing at Loughborough University in the U.K. and director of the Industrial Doctorate Centre for Innovative and Collaborative Con-struction Engineering, is supported by leading academics and indus-try practitioners and presents an up-to-date and relevant investiga-tion of this important subject.
COLLABORATIVE WORKING IN CONSTRUCTION Spon Press
+
+
Feature
26 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
Feature
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 27
toolboxready
taxGetyour
The art of good communication can have as great an impact on your financial picture as it does on the job site.
With year end approaching once more, it is once again time to get serious about the financial side of the busi-ness. Accounting experts have a handful of suggestions
designed to help you manage the tax situation.Paul Rhodes, partner, assurance and advisory with Soberman
LLP, a chartered accountancy in Toronto, says communication is just as important around financials as it is with customer projects. He recommends hiring the right sort of number cruncher for your company (there are different kinds of financial professionals) to en-sure that your tax profile is as lean and mean as it can be. Scrutinize your business’s structure as well, and familiarize yourself with new tax regulations.
Before long you will find that you have created a genuine tax toolbox ready for you to carry all the way to the bank.
Start with a new appreciation for communication, which can have as great an impact on your financial picture as it does on the job site.
Connecting with your tax team: Communication is an important aspect of most construction jobs, but it is also important for finances.
“The business owner needs to have continuous communication
with accountants and other advisors to make sure the opportunities are identified for minimizing tax, either in the company or between the company and its shareholders,” Rhodes says.
“I like to have meetings with the client throughout the year,” to get caught up on the business and the business owner’s personal financial needs, Rhodes says. After all, things do change.
“Maybe a mortgage has been paid off, or personal income re-quirements have decreased. Maybe the kids are getting older and getting ready to go to university. We want to coordinate all of these needs with the tax planning for the business owner to manage the tax liability and the financial planning.”
Hire the right number crunchers: Do you know the difference between an accountant and a bookkeep-er? Do you think all accountants have the same credentials? Under-standing the various skills that different number crunchers bring to the table is an important step in managing your tax picture.
Bookkeepers can be essential team members who keep track of the business’s day-to-day finances. Accountants are trained to analyze the company’s financials to find potential tax savings.
There are also different kinds of accountants: Chartered Accountants (CA’s), Certified Management Accountants (CMA’s)
BY STEFAN DUBOWSKI
© 2
010
Cer
tain
Teed
Co
rpo
ratio
n
The only gypsum board that clears the air. Isn’t that smart?
TM
AirRenew™ is the only gypsum board that actively improves air quality. • Permanently removes VOC*s
by converting them into safe, inert compounds.
• Absorbs VOC*s for up to 75 years, even after multiple renovations, based on tests and analysis.
• Recyclable and works with most paint and wallpaper.
• Provides enhanced moisture and mold resistance using M2Tech® technology.
Only AirRenew™ improves air quality, providing a healthier environment and peace of mind for generations.
Indoor air contains many pollutants and volatile organic compounds (VOC*s). The VOC*s are found in furniture, carpets, cleaning materials, and many other every-day items. With the growing awareness of the importance of indoor air quality, particularly in schools, hospitals, offi ces and residences, it’s time to clear the air.
AirRenew™ captures VOC*s and converts them into inert compounds that cannot be released back into the air.
Visit www.AirRenew.com
* VOC’s (volatile organic compounds) – formaldehyde and other aldehydes.
NEW!
Age
ncy:
Bric
kwor
ks C
omm
unic
atio
ns In
c. 9
05-6
32-8
772
Art
ist:
Erin
n M
cShe
rry
x 11
3 C
lient
: CT3
03 A
R S
choo
l Ad
E R
1 •
PD
FP
ublic
atio
n: C
astle
Con
trac
tor
8.1
25”
x 10
.875
” +
ble
ed4
colo
ur, D
ec.1
, 201
0
CT303 AR Schools Ad ER1.indd 1 12/1/10 2:37:36 PM
Feature
and Certified General Accountants (CGA’s). Each designation de-notes a certain level of education. CA’s usually have the most train-ing and, by some accounts, charge the highest rates as well.
The main difference comes to light if the contractor needs an audited or reviewed financial statement, which lenders would need to see if they were to loan money to a privately-held company. CA’s are certified to provide audited statements. CGA’s are allowed to do so in some provinces, and CMA’s are not at all.
Rhodes discloses that he holds an Associate Chartered Account-ant (ACA) designation from the Institute of Chartered Accountants in England and Wales, and the CA designation from the Ontario Institute of Chartered Accountants.
Build the best business structure: Business structure is important. In the early stages of the company, the owner may be withdrawing all of the profit to cover living ex-penses. If the company’s revenue grows and the owner’s need for personal income decreases, “it is often beneficial to put a holding
company above the operating company,” he says. The business owner would then own the holding company that,
in turn, owns the shares in the operating company. As the operating company generates surplus profit, that surplus can be taxed at a rela-tively low rate, thanks to low corporate tax rates and small business deductions in many provinces.
The after-tax profit could then be moved to the holding company via a dividend payment, enabling the holding company to invest it. The icing on this particular cake: the holding company does not pay tax on the dividend it receives from the operating company. “It is a tax-free dividend,” Rhodes says.
“It is a structure that we often set up for clients. If you have profit that is taxed at a low rate, you are left with more dollars to invest, which is a nice tax-deferred benefit. Ultimately when the funds are withdrawn from the holding company, that dividend from the hold-ing company to the shareholder is taxable at the higher personal rates. In the meantime, there is a deferral of this additional tax, which is a nice tax-deferred benefit.”
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 29
Contractors in B.C. are in for another round of tax challenges now that the province has decided to disengage the harmonized sales tax (HST) implement-ed just over a year ago, says one finan-cial advisor.
Following a referendum in August, in which B.C.’s citizens voted to go back to a separate provincial sales tax (PST) and federal goods and services tax (GST), companies will have to re-jig their books and accounting procedures to prepare for the new regime, says Woody Hayes, part-ner with accounting firm Hayes Stewart Little & Co. in Duncan, B.C., and past president of the Institute of Chartered Accountants of B.C.
“Now we have to put it back to the way it was. That is going to be just as much
work as it was going the other way.”B.C. businesses faced a raft of tran-
sition mechanisms when the province decided to implement the HST. Rules regarding when which tax system should be applied, when which portion of the tax should be collected, and other elements were all parts of the picture.
With the PST/GST system slated to be reinstated by February 2013, contractors need to keep a few things in mind:
If you think your business will save money operating under the HST sys-tem, it would make sense to work to convince prospective customers to buy your services sooner than later. On the other hand, if you think clients would be more open to spending money after the HST is gone, the smart contractor may
want to develop a longer-term market-ing program designed to get custom-ers to sign up for services as soon as the PST is reinstated. “It is a question of developing a marketing scheme that supports the product or service under the HST or the PST, to make sure it happens before or after the changeover date,” Hayes says.
With equipment purchases, you might want to spend sooner than later. Con-tractors pay tax on the equipment they buy. Under the HST system, contractors would be able to apply for a refund on the full amount of the tax paid. If you wait for the changeover, however, you only get back the GST portion. “If you are buying equipment, you are better off under the HST regimen,” Hayes says.
HST rollback makes contractor accounting a challenge in B.C.
Feature
No one enjoys being audited by the Canada Revenue Agency, but people who have organized their financial re-cords likely worry a bit less about the process. By ensur-ing that your contracts, receipts and income statements are put in the proper place, you should have an easier time answering the tax man’s questions, and you may find that your accountant is better able to assess your financial situation and come up with tax-saving options.
As a part of the Small Business Kit for Dummies Cheat Sheet, attorney and author Richard Harroch recommends this system for the filing cabinet:
One drawer should be dedicated to account-ing and bookkeeping records: sales and ex-pense information, inventory, ledgers, income statements and other financial statements.
Dedicate a separate drawer for standard forms, such as order forms and sales agreements.
Give a drawer over to bank records.Use a drawer for signed contracts for real estate,
equipment leases, and purchasing agreements.
How to organize your financial records
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 31
Know who knows what you need to know: Tax rules have a terrible habit of changing (see “HST rollback...” for a good example of this), unbeknownst to many a business owner, thanks to poor communication.
“It is not always well publicized by the government,” Rhodes says.
He advises getting your accountant to provide updates; some accounting firms will provide a review to ensure the contract-or is handling the taxes properly.
It is also a good idea to know the lay of the tax land where you are working.
“It is an area where it is very easy to drop the ball and make mistakes,” Rhodes says.
“With respect to sales tax, there are dif-ferent rules, and exceptions to the rules, in all the provinces. It is easy to not be aware of these details,” Rhodes says. “Ideally the busi-ness owner needs to have resources available to provide a good understanding of the dif-ferent tax rules, especially when going into a different province. That resource is likely to include the business’s independent ac-counting firm.”
Contractors who understand their tax obligations and structure their businesses properly are in a good position to save mon-ey while ensuring that the Canada Revenue Agency is satisfied. With the right financial advisor, and good communication, you may find that your tax toolbox is ready to go for the end of the year.
PricePfister.com
I N N OVAT I O NBYDESIGN
TRADITIONAL AT HEART, Ashfield is inspired by wide open prairie spaces and fond memories of yesteryear. Innovative by design, Ashfield reduces water flow by 30% while delivering 100% performance. At Price Pfister, we design innovative products that push the boundaries of form and function well into tomorrow. Whether you live in a field stone cottage or a sleek urban tower, Price Pfister is designing something just for you.
Feature
32 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
UNLOCKING PROFIT FROM
INTERIORDOORS
Design trends leaning toward originality and personal style are opening new opportunities for contractors to up-sell interior doors.
BY NESTOR E. ARELLANO
INTERIOR
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 33
PHO
TO: J
ELD
-WEN
Feature
Coming out of their shellDesign elements impacting the style of a room are no longer restricted to wall colours, accents and furniture. In recent years many builders and designers have turned their eyes once more to interior doors. “For decades the interior door had been relegated to the background and regarded merely as a privacy element,” says Andrea Colman, de-signer and principal of Fine Finishes, an interior design company in Toronto.
This is unfortunate, she says, because doors can be one of the easiest, fastest and cheapest ways to alter the character and elevate the style of a room.
“By simply picking the right type of wood grain, panel design and hardware, people can immediately transform the mood and tone of a room,” Colman says. “When used properly, doors can be more than an entrance way to a room. They can be a portal to a different world.”
Andrew Jessome, retail sales manager for Moulding and Millworks, a manufacturer and supplier of interior trimmings and doors, says there are primarily four types of inte-rior doors: swinging, pocket, French and folding.
Interior doors are not exposed to the elements nor used to protect against break-ins.They are typically not as sturdy as exterior ones; however, they share many of the materi-als found in their exterior counterparts, according to Jessome.
“The standard material is MDF (medium density fibreboard), but these days interior doors can be made of a variety of species of solid wood as well as fibreglass, glass or re-cycled wood products,” he says.
For example, Moulding and Millwork’s selection of Woodport labelled interior doors feature an engineered wood solid core and solid hardwood on key stress points. Woodport offers a selection of panels in various styles, overlaid with veneer in a variety of finishes including oak, birch, pine, walnut and maple. Many low-cost building proj-ects resort to hollow core doors, says Brad West, director of sales for Jeld-Wen Doors. Interwoven corrugated hollow cells made of recycled scrap wood particles, or structural paper, support the outer surface of hollow core doors.
“These make hollow core doors lightweight and very inexpensive, but not very good for acting as a sound barriers in high-traffic areas,” West says.
A more durable alternative would be solid core doors. “These doors are filled with pressed particle wood, which makes the door denser and resistant to dents and dings,” he says.
Doorway to profit New home constructions and renovation projects are rife with opportunities for contrac-tors to present homeowners with interior door options other than the standard white flush hollow core models, according to West. “The customer, of course, has the last say, but knowledgeable contractors can assist them in picking the right door that suites their tastes and budget.”
For instance, contractors can explain that solid core and solid wood doors have better sound-proofing capabilities than hollow core doors. “Occupants of homes with closely spaced rooms might appreciate the better privacy afforded by these type of doors.”
T he economic appeal of traditional low-cost wood slabs means the door will not close on these products any time soon, but experts say design trends are opening new opportunities for contractors.
In recent years the style, types and construction of interior doors has ex-panded dramatically. The interior door, which for decades has remained a com-modity, is making a strong comeback as an important architectural feature to enhance a home’s overall design or to accentuate the transition between rooms.
To take advantage of this trend, contractors need to be familiar with the op-tions available in the market and the many ways to help their clients achieve more style for less money.
34 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
PHO
TOS
: JEL
D-W
EN
Feature
Similarly, a pantry or closet need not be covered by a plain white door. There are sliding door options that have glass panels or lou-vered panels for closets as well as frosted glass doors with etched designs for pantries.
Safety is another issue that might be of concern to homeowners, West says. Solid core and solid wood doors have better fire resistance than hallow core doors. “Generally the thicker and denser the door is, the longer it can hold off fire.”
While fire doors are typically able to resist flames for a maximum of three hours, many hallow core doors have fire ratings of 20 min-utes. Most solid core doors have fire ratings of 45 to 60 minutes, while some even have fire rating of 90 minutes.
Selling style Thirty years ago, flush mahogany doors were the in thing, accord-ing to West. In the 1990s, moulded doors were everywhere. “Today, doors have become much like furniture pieces. Anything goes. Peo-ple install doors to match the décor of a room.”
While many contractors prefer doors systems or pre-assem-bled units or reversible doors that are easy to install, increasingly homeowners are demanding interior doors that show some indi-viduality, says Shayne Mugford, marketing assistant for Can-Save, a distributor and manufacturer of building materials, kitchen and bath products and doors.
“People are looking for quality and performance, but they also want style and many are willing to pay the extra money for it,” he says.
For example, a plain hardboard door might retail for $28 but for just about $10 more a homeowner can purchase a pre-primed door with panels. “There has been an increase in orders for wood grain doors and solid doors that sell for around $240 to upwards of $290,” Mugford says.
“For homeowners on a budget but seeking that show-stopping look, the Royal Series from Jeld-Wen is a favourite choice,” he says. The Royal Series comes in primed clear pine, knotty pine and oak with bevelled or non-bevelled glass inserts that are either clear or smoked for privacy.
French doors are also a popular choice for entrances into dining areas, patios and libraries, while bi-fold doors remain a favourite for pantries, closets and tight spaces.
In the last five years Web-based technology has been making its way to home interiors.
Many homes today have HVAC, lighting and security systems
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 35
Feature
managed by computer systems that can be programmed and moni-tored by homeowners remotely.
Now a few homeowners are able to use their work computers or smartphones to control automated locks installed on their exterior doors. Some of these systems can be adopted for interior door instal-lations, but contractors may need to consult with or seek the assis-tance of firms specializing in home security equipment if they want to tackle such projects.
The interest in the environment is another trend that offers an opportunity for contractors.
Recently demand for doors constructed with recycled materials has been increasing, according to Mugford.
He recommends the Krosscore line of interior doors. “They have a structure made of renewable wood and a core made of recycled wood and a hardwood outer shell available in cherry, maple, mahog-any, red oak and walnut grain.” Jeld-Wen’s Juniper doors are made from a wood being cleared from many forests, because they are con-sidered an invasive species.
Even though modern processes enable manufacturers to emulate the look and feel of real wood, many discerning homeowners still ask contractors to install solid wood interior doors, according to Mike Snider, CEO of Madawaska Doors Inc., a Schomberg, Ont., company specialized in custom-designed doors. “Nothing beats the looks and feel of real solid wood,” says Snider.
“Cheap moulded and veneer doors may be beauti-ful, but over time they will show their faults. The fin-ish and structural integrity of solid doors last for decades.” He adds that his company’s products are often installed in heritage homes. “If you have a turn-of-the-century home, you normally would not want to mar the look with an MDF door.”
Madawaska’s doors are “non-toxic” because they are not treated with any chemicals and therefore do not release toxic gasses, he says.
“Only a small percentage of our customers ask us to stain or var-nish their doors, most people have it done in their homes.”
Snider says he normally asks contractors to bring photos of the interior and exterior of their customer’s homes so that Madawaska designers can create a design specially suited for the home. “We give the contractors two or three custom drawn designs that their custom-ers can choose from.”
A typical Madawaska door sells for around $300 to $500, but the company also sells units that cost anywhere from $10,000 to $15,000.
Nissan
NC4-122-1A-REV1
LASER
MOCK-UP
X
1LD LD LD
CYAN MAGENTA YELLOW BLACK
LASER PRINTOUT @ 100%
MAY 03 , 2011 JOB NO: NCA FLT WP2122 AD NO: NC4-122-1A-REV1 SIZE: TRIM: 8" X 10 3/4" BLEED: 8 1/2" X 11 3/8" TYPE: 7" X 9 7/8" COLOUR: 4/0 CMYK MEDIA: VARIOUS MAGAZINES SUPPLIER: TBWA STUDIO STUDIO ARTIST: WM – MAY 03, 2011 APPLICATION: INDESIGN CS4 AGENCY: TBWA\TORONTO CLIENT: NISSAN CANADA
PDF/X-1aAPPROVAL
____________
Starting from $30,998For more information, visit ncv.nissan.ca
* Available features. MSRP for 2012 NV 1500 (X41A72 AA00) is $30,998. Freight and PDE charges ($1,630), license, registration, insurance, duties and applicable taxes (including excise tax, fuel conservation tax, tire recycling tax and duties on new tires, where applicable) are extra. All prices are subject to change without notice. TMThe Nissan Commercial Vehicles names, logos, product names, feature names, and slogans are trademark owned by or licensed to Nissan Motor Co. Ltd., and/or its North American subsidiaries.
The All-New 2012 NV LineupINNOVATION THAT WORKS
Your business card may say contractor, plumber, landscaper or electrician, but we know that’s only half of the story. You’re also the accountant, customer service department and CEO. And that’s why the Nissan NV is so much more than a van. With a built-in filing cabinet,* and expanded desktop surface,* it’s your entire office on wheels – perfect for all your jobs. You’ll have a hard time finding any other van than can do the same.
11:38 AM CONFERENCE ROOM
1,417mm max cargo height
9:02 AM POWER PLANT
powerful and efficient 5.6L V8 and
4.0L V6 engine options
7:15 AM EXECUTIVE CHAIR
wear-resistant and water-repellent seats
4:45 PM STORAGE CLOSET
up to 6,629L of cargo space
3:12 PM DESK
fold-down passengerseatback with optional
120V power
2:45 PM CORNER OFFICE
centre console with fileand laptop storage*
Feature
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 37
More style for less cash There are many ways contractors can help clients achieve more style for less cash.
For homeowners not prepared to spend a premium on solid wood doors, there are numerous models of doors with real wood veneers or moulded grains that emulate various species of wood.
Clear pine from Quebec is also an economical choice for solid wood interior doors. Clear pine can be stained to look like more expensive species such as cherry, or maple or hemlock. The only wood it cannot imitate is oak because of its unique grain. To save time and money, contractors can also offer pre-primed interior doors or system packages that come with all the hardware needed to install the door.
When it comes to doors with glass inserts, flat glass is much cheaper than bevelled glass. Clear glass costs slightly less than frosted glass.
Doors are reaching new heights. The typical 6’ 8” door is quickly being replaced by the models that are 8’ tall to match today’s higher ceilings. Contractors can help clients with lower ceilings to achieve the illusion of greater height by installing 7’ 6” doors.
Colman from Fine Finishes also says door trim and mouldings enhance the look of a door and can be an added source of income for contractors.
Trim and mouldings are like the frame to a painting, she says. They compliment and enhance the look of the door and can sometimes make an entranceway appear taller or wider. “Trim and moulding can also be used to make the doorway echo or contrast the overall style of the room,” she says.
Contractors should also pay close attention to the hinges, knobs and handles they install. “Make sure the hardware matches the door and the style of the room,” Colman says.
For example, gold tone knobs were popular a couple of decades ago, but the muted colour schemes in today’s interiors are better complemented by duller chrome finishes. Antique finished brass handles and hinges, on the other hand, work best with rustic and traditional interiors, she says.
“Recently, I was in a home with interior doors of the ’70s flat brown wood type with brass knobs. A more current door style and hardware could have brought that home into the 21st century.”
38 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
Feature
Ceilings are no longer just a cover over our heads. They have moved from providing the simple function of protecting us from the elements to a stylish addition to every dwelling we enter.
By far the most common material used for ceilings in domes-tic settings is drywall, principally for its modest cost and forgiving nature.
These gypsum panels are usually placed between sheets of paper al-though they can be made from fibreglass to prevent mold growth, since mold is prevalent where the drywall has been exposed to water. In areas of high humidity, greenboard or cement board are recommended.
Despite its susceptibility to moisture, drywall is a passive fire pro-tection material since gypsum contains hydrates that, when exposed to fire, are vapourized and retard heat transfer.
Further, the more layers of Type X drywall that are added to an installation generally the greater fire resistance, according to the Canadian Building Code and Underwriters Laboratories of Canada. Type X drywall is made by adding glass fibres to the gypsum, and is typically required for drywall to have a fire resistance rating.
Drywall ceilings, which have been around since the 1950’s, took over from plaster and wood, and although the former material has disappeared the latter is still used; it remains an attractive choice for its warm appearance, showing up in dining areas and recre-ation rooms.
The most popular types of wood used are beaded ceiling board and tongue-and-groove planking. Although they appear slightly different, both are installed the same way. The wooden boards can be nailed directly to the bottom of ceiling joists using a galvanized finish nail, and butt joints or seams are common.
As a result, wood ceilings can be treated with a much lighter finish than would be used on a floor. One or two coats of light paint should be enough or a light oil finish or a coat of polyure-thane or varnish.
However, wood ceilings are never perfect. Mike Bielak, Canadian Sales Manager for CertainTeed Ceilings in Oakville, Ont.,
UP Looking
Homes today are being built with a variety of ceiling styles and materials.
BY DAVID CHILTON
1149 WoodHaven
1148 PaintedWhite
PHO
TO: A
RM
SST
RON
G
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 39
Feature
cautions that, unless a wood ceiling prod-uct has been especially designed to absorb sound, its acoustic quality will be poor.
To address that concern, CertainTeed has a division called The Acoustics. “It is a custom shop, in a sense,” Bielak says. “They actually make wood ceilings with an acoustical qual-ity. They will perforate those wood panels and they will add acoustical materials in behind them and be able to create a very nice esthetic ceiling that also provides acoustics.”
Like wood, tin ceilings were once wide-spread, especially in North America. Du-rable, lightweight and fireproof, tin ceil-ings were usually painted white to give the impression that they were hand carved or moulded plaster. By the 1930’s tin ceilings became less and less popular, although these days the material is again being sought as a ceiling option and several companies offer the traditional rolled sheets of tin as well as tin panels made to fit into a drop ceiling grid. Typically, these panels are ei-ther 24”x24” or 24”x48” for ease of handling and one-person installation. There is also a
patented interlocking tin panel that screws directly into existing drywall, popcorn and plaster ceilings without requiring extensive plywood backing. In almost all cases, irre-
spective of panel size, today’s manufacturers use recycled blackplate steel 1/100” thick or sometimes a real tin plate coating stuck to the steel. For those who want the look of tin
480 Country Classic™ Plank
1148 WoodHaven® Painted White
40 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
Feature
but without its price there are imitation pan-els pressed from plastic or aluminum.
Plastic “tin” ceiling tiles are usually made of PVC and are either white or have a paint-ed finish. Their tongue and groove design makes installation easy, requiring only a ceiling adhesive to make them stick. They can be installed over an existing textured ceiling, again using only a ceiling adhesive. PVC, of course, will not rust and is washable. Last, but not least, PVC tiles will prevent the echo that occurs with authentic tin ceilings.
The various types of material used in the construction of ceilings are matched by the types of ceilings that exist. Perhaps the style counterpart to the ubiquitous drywall ceil-ing is the dropped ceiling, interchangeably called a suspended or false ceiling and an ab-solute staple of modern building, especially in commercial settings and residential base-ments. The gap between the actual struc-tural ceiling and the dropped ceiling that is attached to is called the plenum space as it
is sometimes used for HVAC air return and very often concealing wiring, pipes and duc-twork. The beauty of a suspended ceiling is
its ease of use. Panels made of wood, metal, plastic or mineral fibres and in virtually any colour can be lifted in and out of the sus-pended grid, offering instant access to the plenum and greatly simplifying repairs and alterations compared with the task of rip-ping out then replacing drywall. This consid-erable advantage is not perfect; however, a dropped ceiling means reduced headroom. Clearance, usually a minimum of 4” to 8”, is often required between the lowest obstruc-tion and the ceiling grid level. Depending on the panel material used dropped ceilings will show their age quite readily.
Whether drywall or suspended, both ceil-ing types are flat. “Grid is grid,” says Ham-ilton, Ont.-based John Hudson, retail sales manager for ceilings at Armstrong World In-dustries. “Everybody’s grid looks the same. Everybody’s grid works the same.”
What about those ceilings that are not flat? What about the vaulted ceiling, which are typically new construction, rather than remodelled from flat ceilings. Loved and hated in equal measure by homeowners and contractors, the vaulted ceiling (also called the cathedral ceiling because of its distant origins in Europe) gives a soaring, airy feel to any room, but is a major waste of energy in cold climates since heat gathers in the cavity the vault creates. Beyond that, since vaulted ceiling panels are attached directly to roof trusses they have to be wide enough for the proper installation of insulation and
URBAN MODERN MOULDINGS
Primed to fi nish to your taste. High quality seamless MDF
Order your sample set right now atyour nearest Castle Building Centre
Introducing our high impact modern mouldings.
The perfect décor enhancer for today’s economy and taste.
High quality seamless MDF
Order your sample set right now atyour nearest Castle Building Centre
Moulding to your lifestylealexandriamoulding.com
Looking for
ecological
modern
mouldings?
Visit our
web site.
4522_ALXE_Castle_ContractorAdvantage_ADV_VF.indd 1 04/10/11 1:35 PM
1240 TinTile Tin Look (Field Painted)
Feature
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 41
ventilation behind the ceiling. If the trusses are too thin then correct insulation becomes impossible, and if any gaps are filled in with insulation ventilation will suffer. Vaulted ceilings, furthermore, are difficult to clean and recessed lights and other fixtures are hard to change or replace.
If a vaulted ceiling seems too complicated then a tray ceiling may be another option, since different ceilings have different costs, al-though inevitably prices continue to rise.
Hudson says more expensive materials have caused the increases. “We are using better mixes. We are getting into things like PVC. We use virgin PVC in our products. Virgin PVC is very expensive but you have to use that to keep the colour, otherwise it is going to yellow after five or six years. Are the costs coming up? They are coming up, but when you sell your home you are getting it back in the value of your home.”
The tray ceiling is shaped just like a meal tray. It looks like a regular flat ceiling but has a centre flat portion that is pushed in about 12”. Alternatively, the tray ceiling can be inversed (known as a recessed tray), and the flat centre part of the ceiling protrudes into the room. Tray ceilings give the feeling of space, because they make a low ceiling look higher, but come without the empti-ness and energy loss of the vaulted ceiling since they allow maximum insulation.
The addition of crown moulding to them creates further architectural interest. With
the standard tray model, low ceilings can be recessed into crawl spaces to make small bed-rooms feel larger, which uses otherwise unus-able attic space. Contractors should be aware that such remodelling requires sound struc-tural knowledge.
Coffered ceilings are a further alterna-tive to the flat ceiling, being divided into geometric shapes, usually rectangular, by beams to create the impression of depth and luxury.
At one time coffered ceilings were the preserve of libraries, formal dining rooms and the like.
Now the design has made its way into kitchens, master bedrooms and, in fact, al-most anywhere where the ceiling height is more than 8’. Again a crown moulding at-tached to the coffered ceiling will offer ar-chitectural interest.
Irrespective of the style and material of the ceiling safety remains central.
Bielak says 15 to 20 years ago there was more of a demand for fire rated ceiling as-semblies, but that construction methods have since changed and fireproofing is bet-ter handled. “The demand for fire rated materials, the demand for fire rated ceil-ing assemblies, has fallen. Where it used to occupy maybe 15% of the market it is now questionably 5% or less.” Overall, then, when it comes to quality, safety and variety it can be said that the outlook for ceilings is looking up. PH
OTO
: AR
MS
STRO
NG
5424509NWH Metallaire Hammered Border
Custom Creations™ 1280 Easy Elegance™
coffer white
110507 Metellaire Copper
1310 StyleStix™
Feature
42 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
The right moulding choices will deliver the perfect finishing touches for every job.
BY JOHN G. SMITH
MASTERMOULDING
the There was a time when baseboards served
a more practical role. The decorative mouldings that now conceal gaps at the
edge of floating floors were originally intro-duced to protect plaster walls from wet mops.
The shift to a more decorative purpose has hardly limited their size.
“You are always going to see some of the smaller, thinner mouldings that are gener-ally used in basic construction; that serve the function of hiding a joint between the floor and the wall,” says Anna Kitchen, marketing coordinator for Alexandria Moulding. When it comes to renovations and premium con-struction projects, however, today’s installers and their clients are reaching for thicker and wider mouldings than ever before.
Part of the interest in taller baseboards can be traced to the ceiling heights in mod-ern homes, suggests Peter Branidis, branch manager of Moulding and Millwork’s On-tario Division. A similar trend can even be seen where the wall meets the ceiling. A 4” crown moulding may work in a room with an 8’ ceiling height, but a 10’ ceiling will de-mand a 7” moulding. “When you go to 10’, you have to go with the bigger crown to give it the presence that it requires,” he says.
Some of the most impressive examples of moulding and millwork are emerging by com-bining a number of pieces into a single, wider
look. “We are starting to see the wider use of more dressed, regular four-sided board,” Bra-nidis adds. A colonial appearance, for exam-ple, can be created by installing a door stop at the bottom of a baseboard rather than us-ing a traditional piece of quarter round. “The beauty of trim is you can make it look the way you want with the right skills.”
As layered as the individual jobs may be, the latest looks are more streamlined than ever, replacing many of the curves and intri-cate profiles of the past.
Branidis points directly to the condo market when describing the source of this trend. “It is just that overall contemporary feel. The condo market is all that way,” he explains, pointing out the streamlined looks which mirror the appearance of cabinets and counters in modern kitchens.
As for the materials of choice, they tend to vary from one region to the next. Maple is a popular product among designers in Eastern Canada, while oak is often seen as the more popular choice in Western Can-ada, Kitchen says. In cottage country, few options can match the informal and rustic appeal of pine.
The most popular material of all, however, is MDF. Upgraded production processes are creating versions of this moulding that are lighter and easier to handle than ever before,
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 43
PHO
TOS
: ALE
XA
ND
RIA
44 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
PHO
TOS
: CER
TAIN
TEED
, A
LEX
AN
DR
IA
Feature
more affordable and pre-primed. This layer of primer certainly supports a consistent finish.
The finish on a store-bought moulding can even go beyond that. Moulding and Mill-work’s FinTek product line is fully finished the moment it arrives on a job site and comes complete with a touch-up kit that includes the matching DAP to fill joints and nail holes.
As important as any finish will be, accu-rate measurements will be the first step in delivering a professional look in any mould-ing project. Chair rails, for example, should always be placed 32” from the floor.
Of course, to ensure a proper fit from one piece to the next, moulding materials should also be allowed to acclimatize indoors before
being installed. This will prevent the buckling or unwanted gaps that would otherwise come with any expansion or shrinking.
A tight fit will be vital to offering an un-interrupted look as well. Every 8’ span of moulding should also be used to cover no more than 7-7/8”, leaving the extra 1/8” to ensure a tightly compressed connection be-tween one piece and the next. Simply attach one end of the piece to the wall, place the other end in position, and push the centre of the span in place.
Still, few measurements can seem more challenging than a piece of crown mould-ing, particularly when it comes in the 52/38 style with a pre-cut 52° bevel that will sit
against the ceiling and a 38° angle to sit against the wall.
The fence on a mitre saw can be one of the most practical forms of support for these jobs. When it comes time to cut the corners, place the moulding on a mitre saw with the top edge closest to you. Then lift the back edge of the moulding where one bevel sits against the saw’s fence and the other is against the table, which will represent the ceiling. Swing the mitre setting 45° to the right when cutting the left side of an inside corner, and 45° to the left when cutting the left side of an outside corner.
The cuts are a little trickier if the mould-ing needs to be placed flat on the table, and this is likely to happen more often as the pieces become wider than the saw’s back fence. When cutting the left side of an inside corner in this case, place the top edge of the moulding against the fence, swing the mitre (table) setting 31.6°, and tilt the blade 33.9°. If cutting the right side of an inside corner, place the bottom edge of moulding against the fence, set the mitre 31.6° to the left, and tilt the blade 33.9°.
Alexandria Moulding thinks it has an easier solution, offering crown moulding with a 45° edge and a profile which is copied on both sides of every piece. “When you are cutting it, it makes your life so much easier, because as soon as you make that bevel cut, when you flip the moulding over it matches perfectly onto your first piece,” Kitchen says. When installing a coffered ceiling, the upgraded design might cut installation times in half.
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 45
A few other techniques will make a differ-ence in every project.
In most cases, a moulding will be attached by nails spaced no further than 16” apart, or using a combination of adhesive and nails. A pneumatic nailer will be the tool of choice to avoid any damage that could occur when a hammer needs to swing within a few inch-es of the ceiling or a newly finished floor. (Those who work with a hardwood like oak will want to pre-drill a few pilot holes to avoid split material.) When it comes to adhesives, meanwhile, any surfaces should be cleaned of dirt or drywall dust to ensure a proper bond. Carpenters who take the time to wipe away any excess glue before it cures will also save sanding time at the end of the job.
The jobs which wrap around an entire room should also begin and end in a hid-den corner since the patterns will seldom match when the last piece meets up with the leading edge of the first piece. Many related frustrations will be avoided by dry fitting the various segments in place before attaching them to the wall.
Uneven walls or variations in the mould-ing’s thickness may require some sanding at the back of the material, or the addition of a shim to ensure an even look. After all, any sanding at the front of the moulding will simply compound problems, leading to varia-tions in the design’s profile. Once the mould-ings are fixed into place, trim any shims and apply a bead of filler or paintable caulking along the edges which touch the ceilings and walls. Nail holes should be filled with a non-
shrinking filler to avoid blemishes in an oth-erwise smooth surface.
Granted, a little added inspiration could deliver the most impressive touches of all.
“A lot of people like the ideas because they may not think of them by themselves. They want guidance,” Kitchen says, referring to the guidance that contractors can offer customers. “Homeowners like to get infor-mation on what baseboard matches what casing and crown to give the overall feel.”
Customers can often be inspired to include more projects like fireplace sur-rounds and display niches, Kitchen says. “In some markets, especially in Quebec, they do like the bundles we create to frame a
door, and we will give them the option of putting two casings on either side of the door and an architrave (a flatter moulding taller than the casing, with a shelf-like detail at the top). It gives the illusion of having a taller frame, or we do have some sets that have plinth blocks that go at the bottom of the door and the two rosettes that go at the two top corners.”
No matter what the project involves, how-ever, Branidis stresses that patience is a virtue.
“You see a lot of homes where a guy just zipped through to get the job done,” he says. “When it comes to really crafting a look in the room or a look in a home, it takes time if you really want it finished right.”
Feature
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 47
Feature
EXPERTPANELS12 things every contractor needs to know about drywall
BY JOHN G. SMITH
Few building supplies will be more fa-miliar to contractors than a sheet of drywall. An average home includes
more than 7 tonnes of gypsum, and North America’s suppliers have been known to pro-duce another 30 billion square feet of the material every year.
As familiar as these sheets may be, there are plenty of examples of projects which have gone awry. Work has been marred by every-thing from poorly applied tape to hurried sanding jobs. The wrong material choices have even been known to house colonies of mold.
Luckily, many of the challenges can be tackled with a little know-how. Consider these tips that will lead to better, smoother walls.
Think biggerThe most common sheets of drywall mea-sure 4’ by 8’, but a number of other sizes can help to limit the amount of taping, particu-larly when working on taller surfaces. Sheets are also available in 9’, 10’ and 12’ lengths, while 54” panels can be stacked horizontally to fill the face of a 9’ wall.
There are times when it might even make
sense to add to the depths. An extra ¼” sheet, for example, can be used to enhance sound barriers or cover rough surfaces.
Just remember to stagger any horizontal sheets to avoid single joints which stretch from the ceiling to floor. They will be harder to conceal.
Lighten the load when working on ceilingsIt is possible to create a ceiling with 72-lb. sheets of 5/8” drywall, but a ½” panel made especially for ceilings can shed 20 lb. from the weight.
Properly insulating and air sealing a home offsets more
greenhouse gases than planting 20 trees.* It also reduces
energy bills dramatically. Johns Manville fiber glass
insulation reduces dust or itch and is made without
formaldehyde for improved indoor air quality. There’s
simply no better way to help your customers do right
by the planet and by their budgets. And that’s a win
for everybody.
www.specJM.com1-800-661-9553
WHAT’S BETTER FOR THE ENVIRONMENT THAN A YARD FULL OF TREES?
*Insulation Outlook, January 2009, AZoCleantech website, 2009.
448607_Johns.indd 1 10/7/09 9:03:35 PM
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 49
Feature
The advantages are not limited to the reduced weight, either. These sag-resisting panels are specially designed to support tex-tured materials which might be applied to their surfaces.
When installing a ceiling exposed to nat-ural elements, an exterior grade of ceiling board will be the better choice as a defense against moisture-related damage. It will also offer a smoother surface than a simple sheet of plywood.
Keep your powder (and your gypsum) dryEvery supply of gypsum should be allowed to acclimatize in a dry area for at least 48 hours, and at a temperature no lower than 10˚, be-fore being installed. It also needs to be kept away from damaging sources of moisture such as concrete or standing water.
Anything that gets wet will need to be thoroughly dried, while any remaining piec-es with a soft core or visible signs of water damage will need to be cut away until noth-ing but undamaged board remains.
The environmental factors that affect professional tapers do not end there. If hu-midity shifts from 50 to 90%, for example, tapers and painters can expect a four-fold in-crease in drying times, the Drywall Finishing Council notes.
Think in colour when trying to fight moisture and moldWater-resisting panels like green board are better able to resist the ongoing attacks of moisture in a laundry room, basement or bath-room. Blue sheets of Humitek offer even more protection against water and mold.
Of course, there are limits to the mois-ture that these panels can withstand. The wettest areas of all might benefit from the use of a cement board like Durock, which is available in 4x8 sheets and even 3x5 pieces to offer a quick fit around a tub surround. This material even scores a perfect 10 in ASTM mold tests.
Stand up to the abuseSome walls have a rougher life than others. A mudroom or the hallway in a setting like a daycare centre would benefit from an abuse-resistant panel that can stand up to the hits, kicks and abrasions which would dent a tra-
ditional piece of gypsum. These enhanced offerings include a dense core and a face covered with a heavier paper, while options like Fiberock actually mix gypsum and fibers to stand up to the assault.
The added protection is not limited to the drywall, either.
Rather than using traditional metal bead-ing, some installers opt for plastic strips that will bounce back from an impact. In addi-tion to that, the plastic strips will also con-form to the shape of corners which do not meet at a perfect right angle.
Another option is paper-faced corner bead, which can eliminate the cracking seen with steel and plastic options. Damaged sec-tions of the paper-faced strips can be cut
away and repaired without removing and replacing an entire piece.
Round the corners with flexible sheetsSkilled drywall installers have been known to transform the flattest sheet of drywall into a curved archway, usually by scoring the back of the sheet into narrow strips or wetting the paper surfaces before bending everything in place.
This is fine when it works. More often than not, the efforts lead to a crumbling piece of gypsum and a muttered curse.
There is an easier solution. Flexible panels that are just ¼” thick will curve much more eas-ily. No scoring or wetting is required.
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 51
Feature
Fight fire with a fire barrierEvery sheet of gypsum can offer a limited fire barrier. The core includes chemically combined water which will actually trans-form into steam when exposed to high heat. Once the water disappears, the material that remains will still act as an insulating barrier.
The Type X panels made with gypsum, glass fibers and vermiculite are even better able to resist fire than a regular piece of gypsum.
As important as the choice of drywall will be to a fire rating, however, it is the overall assembly which earns a nod from the Build-ing Code. For example, a 5/8” Sheetrock Firecode Type C board earns a one-hour rating when it is attached to each side of wood or steel framing. If that is not enough, a double layer of ½” Sheetrock Firecode C will double the rating when attached to a steel frame.
Seal the sound barrierThe noise in a raucous rec room will eas-ily transfer between floors when everything is lined with basic drywall. Some added attention to an assembly’s Sound Transmission Class (STC) rating will better dampen the noise.
The drywall will simply need some added support when forming an effective sound barrier. For example, every hole or crack that could be a conduit for sound should be filled with an acoustical sealant.
Drop the dustThe dust from drywall compounds can be a nuisance on any job site, and this is particu-larly true when working on a retrofit in the middle of an occupied area. The fine white cloud seems to creep into every nook and cranny around a room.
In contrast, a Dust Control Drywall Com-pound will combine into clumps that drop straight to the floor.
Speak a common languageProfessional boarders and tapers can create a perfectly smooth surface on any job, but a space like a garage or warehouse may re-quire a little less finesse.
The Level of Gypsum Board Finish, rang-ing from Level 0 to 5, offers a clear idea of the quality of work people will expect.
At the lowest Level 0, a job does not in-clude any taping, finishing or accessories. By
the time it reaches Level 2, a project requires tape to be embedded in joint compound at every angle, while every fastener is also cov-ered in compound. The most common fin-ish in a home, at Level 4, has a single coat of joint compound over interior angles, two coats over flat joints, and three coats over fasteners. The Level 5 work that might be needed for a glossy surface includes a final layer made of a thin skim coat of joint com-pound or an acrylic primer surface which can be applied with a paint roller.
Chalk it up to an easy measurementEvery contractor has heard it before: mea-sure twice, cut once.
Some of the easiest measurements will not even include a ruler. When cutting the opening for an electrical outlet, try covering the edges of its box with a layer of chalk. It
will make a clear imprint on a piece of dry-wall before it is cut.
Never fight the board Nobody likes to be forced to do anything. Drywall is no different. If a panel of gypsum is forced into place, the fasteners in the middle of the sheet could pull out, deforming the joints.
Repairs to this damage will involve making a square cut around the deformed area and then cutting a new sheet to plug the opening. A drywall repair kit will offer the clips to hold edges of a new sheet in place. All four sides can be filled with tape and compound once the clips’ tabs are removed.
When clips are not available, edges of a new sheet can be cut at a 45˚angle, buttered with drywall compound and pressed in place before being finished as a butt joint.
Think of them as the tips that create ex-pert panels.
Feature
52 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
A new version of LEED, short for Leader-ship in Energy and Environmental De-sign, is coming next year and the onus
on contractors promises to be huge.Developed in 1998 by the U.S. Green
Building Council (USGBC), the accredita-tion program was adapted five years later in Canada by the Canada Green Building Council (CaGBC).
The Canadian program last underwent a significant update with the release of the LEED Canada NC 2009 and LEED Canada CS 2009 rating systems, which followed on the heels of USGBC’s release of LEED NC-2.0.
Most recently the U.S. organization has completed a second round of public com-ment towards the development of a new LEED 2012 rating system, the U.S. release of which is scheduled for November 2011. The proposed changes are still undergoing review for adop-tion in Canada, according to the CaGBC. The organization says it cannot comment further on changes until its review is complete.
The program certifies buildings and homes built to have reduced environmental impact and higher performance. Credits are accumulated in categories of site sustain-ability, water efficiency, energy and atmo-
sphere, materials and resources and indoor environmental quality, and go towards a site being graded as Certified, Silver, Gold or Platinum. The CaGBC is responsible for this certification in Canada.
Continuous improvement in programs such as LEED is, in part, due to regional codes and standards catching up to them, at which point the programs leapfrog ahead and raise the bar on performance and in-novation, says Barry Reid, Sustainability Manager, Georgia-Pacific Gypsum. He says contractors and builders opinions are di-vided on program changes; some see them as a negative that adds cost and complexity, while others instead see opportunities to dif-ferentiate their businesses.
“The landscape in this area is moving so fast it can be hard to keep up, and it becomes hard to measure because construction is not always keeping up with the rate of changes in codes, standards and programs,” Reid says.
Whether or not contractors are keeping up with programs like LEED, he adds they will have to sooner rather than later.
“Energy management is king, and mea-sures related to energy management will be adopted pretty quickly,” he says. “No one
WILL LEED LEAD THE WAY IN 2012?The program continues to evolve and require more and more sophisticated documentation from contractors.
BY LAWRENCE CUMMER
Feature
CONTRACTOR ADVANTAGE NOVEMBER/DECEMBER 2011 | 53
wants to be seen as a laggard in terms of en-ergy efficiency.”
While still under review by the CaGBC, in-dustry experts note a few potential trends that Canadian contractors will have to pay close at-tention to, especially around materials.
Measuring Materials:“One thing is clear in the ‘Materials and Re-source’ section: changes suggest that prod-ucts contributing to LEED credits will be less about attributes, for example specific recycled content targets, and more about environmental performance,” Reid suggests.
Because of this, experts suggest a greater focus will be placed on life-cycle assessments (LCA’s) and environmental product declara-tions (EPD’s). LCA’s look at a product from its raw materials, through to its processing, manufacturing, distribution, use and repair, to its ultimate disposal or recycling; while EPD’s disclose a product’s environmental impact.
Understanding how to source materials and products contribute to LEED accredi-tation is; however, an area of confusion for some contractors.
Bruce Heaton, Eastern Canada regional purchasing manager for Moulding and Mill-work, says customers are increasingly asking questions about LEED, but that misunder-standing exists between product certifica-tion and contributions to accreditation.
“We are getting asked by customers for
‘the LEED product,’ and there seems to be a bit of a gap in knowledge, in understanding that certain products can help contribute to a LEED category, but there is not a specific LEED-certified product,” he says.
Contractors need to be asking instead for products that contribute to particular ac-creditation categories.
Moulding and Millwork has worked to be proactive, developing products that help build-ers qualify to a number of LEED categories. Its nine manufacturing factories contribute toward regional credits, and it has increased its sourcing of environmentally-certified wood (from responsibly managed forests).
Depending on the product, location of the building and categories being worked towards, the company has products that could contrib-ute to between one and five LEED credits, including recycled content, regional materi-als and (through new urea-formaldehyde-free products) indoor environmental quality.
Still, contractors need to make LEED and or other environmental programs a prior-ity in order for manufacturers to be able to help. For example, it is fairly easy to source environmentally-certified pine, whereas ma-hogany comes from protected rainforests.
In addition, environmental certification programs always have a learning curve, and Heaton thinks LEED 2012 will be no dif-ferent. Gaps exist between what designers and architects want, what is readily available
“The landscape in this area is moving so fast it can be hard to keep up, and it becomes hard to measure because construction is not always keeping up with the rate of changes in codes, standards and programs.”
– Barry Reid
54 | NOVEMBER/DECEMBER 2011 CONTRACTOR ADVANTAGE
Feature
and what consumers and contractors know about. “It is very complicated for Mr. and Mrs. Smith, and even for Mr. and Mrs. Smith Contracting. The good news is contractors are starting to better know what is available and how to match it to their needs.”
Demanding Documentation: The contractor’s biggest role in LEED may revolve around documentation.
Contractors are responsible for track-ing and sharing a great deal of information around materials and processes in order to assist in accreditation.
“What is important is that contractors know about the products that they are us-ing,” says Murray Line, branch manager at Johns Mansville Canada Inc. in Winnipeg.
“They should go to their manufactur-ers and ask for the documentation needed, and supply it to the general contractor (or builder) who can use it as evidence of the product’s environmental attributes.”
For example, Johns Mansville develops manufacturer statements presenting the third-party certification of its products’ green lifecycle including reduced use of vir-gin resources, reduced use of restricted in-gredients and elimination of toxins such as formaldehyde.
LEED accreditation can require as many as 2,000 different custom documents, a sig-nificant challenge for builders and contrac-tors to accumulate, says environmental con-struction consultant Richard Kula, principal at Sustainable Solutions Inc. of Winnipeg.
Kula says that LEED is becoming even more document driven.
“It is getting worse,” he says. “It is just get-ting a lot more complex and the amount of work required is getting more sophisticated. The program is evolving, but it is still an enor-mous amount of work.”
Kula attributes slip ups and challenges re-lated to documentation as the cause for fail-ure of a majority of projects that had been initially registered for LEED. He says only 10% of projects ultimately become certified, since it is difficult for specialists, general contractors, designers and architects on the same page around documentation.
Because of this he steers most of his cli-ents away from the program.
A possible alternative: Kula says, because of documentation challeng-es, he is increasingly presenting Green Globes to his clients as an alternative to LEED.
In Canada, Green Globes was adapted in 2000 from the earlier Building Research Establishment’s Environmental Assessment Method (BREEAM) Green Leaf eco-rating program. The same year, BREEAM Green Leaf for the Design of New Buildings was
developed for the Department of National Defense and Public Works and Government Services Canada.
In 2004, the program was adopted by the Building Owners and Managers Asso-ciation (BOMA) Canada for its Go Green Plus program, which was selected as the certification program by the federal gov-ernment’s Department of Public Works and Government Services.
Kula says the program, has lower costs re-lated to assessment and verification, because it does not require custom documentation, but the usual documents generated during the building process.
According to Kula, the program puts greater emphasis on water and energy than LEED, and that steering clients toward Green Globes has created opportunities to develop even more energy efficient build-ings. He says he has even seen situations where the savings his clients found from Green Globes certified were able to be put towards more efficient equipment for en-ergy savings. It typically costs between $3,000 to $5,000 to use its online system and to have a building third-party validated.
All environmental programs have a fi-nancial threshold or trade-off, says Heaton, since some products can reduce environ-mental impact without markup, while for others there is still a premium attached. Still, as environmentally-friendly and energy-effi-cient products and practices become more commonplace, economies of scale will con-tinue to drive prices down.
“At the end of the day we can all be ex-cited that things are moving in the right di-rection. The more everyone learns the bet-ter it is for ourselves, our environment and our future.”
HELPFUL REFERENCE WEBSITESFor more information on LEED 2012 and Green Globes visit:
Canada Green Building Council: http://www.cagbc.org/ LEED 2012 Development: http://www.usgbc.org/DisplayPage.
aspx?CMSPageID=2360 LEEDuser discussion forums: http://www.leeduser.com/discuss Green Globes: http://www.greenglobes.com Green Building Initiative: http://www.thegbi.org/
PRIMESOURCE
®When you demand the best, demand Grip-Rite.
Fasteners, Collated Fasteners, Collated Screws | Tools, Compressors, Hoses & FittingsWire Fence | Diamond Saw Blades | Roofing Products | Steel ProductsTarps, Curing Blankets, Reinforced Poly | Debris Netting, Barrier Fence & Barrier TapeWeather Barriers | Building Accessories
To learn more, or to fnd your nearest
Grip-Rite® dealer, call 800-676-7777 today or visit us online at
www.grip-rite.com.
Lightweight and compact
Dual loading, top or rear loading
Selectable trigger, easily select between bump fire and sequential
Rotating aluminum rafter hook
Increased air effciency – drives flush every time
Tool-free depth adjustment
Available in 21°, 28° and 30°
•
•
•
•
•
•
•
Now available across Canada at
many retailers and Castle locations.
PINK™ reNovatIoNs are greeNer aNd save moNey∆
Colour:
Trim Size:
Safety/Live:
Bleed:
Media:
Client:
Ad #:
Publication:
Month/Index:
Pub Close:
Date Final:
Prepared By:
Owens Corning
-
Contractor Advantage
Nov/Dec 2011
-
Sept. 28, 2011
Chris Straus
8.125 x 10.875”
.5”
.1875”
Magazine
CMYK 08/10/11Copywriter:
Proofreader:
Art Director:
Cre Director:
Account Exec:
Production:
Proj Manager:
-
John Meadwell
Chris Straus
Brian Meadwell
Kelly Straus
John Meadwell
Kelly Straus
Date:
Ad
Info
rmat
ion
Prin
t In
form
atio
n
Han
dle
r In
form
atio
n
Docket #: OCC-0213-11 Filename: OCC-0213-11_ContAdvantAd_ECO
Meadwell 4310 Sherwoodtowne Blvd. Suite #302 Mississauga, ON L4Z 4C4P. 905-897-1717 F. 905-897-1625
Creative Approval Proof Final
Client Section Picture CopyAll content, claims, errors and omissions and associated liability are the responsibility of the client after the work has been proofed and signed.
OK/No Change OK/No Change
OK/w/ Marked Changes OK/w/ Marked Changes
Sign: ____________________ Date: ____________________
Account Director Sign: ____________________ Date: ____________________ Comments: __________________________
Account Manager Sign: ____________________ Date: ____________________ ______________________________________
Production Manager Sign: ____________________ Date: ____________________ ______________________________________
Graphic Designer Sign: ____________________ Date: ____________________ ______________________________________
1-800-GET-PINK® or visit www.owenscorning.ca
today’s contractors and homeowners demand products that are easy to use,
quick to install, safe and reliable - all from a name that they trust. that’s why we
created ecotouch™ PINK™ FIBergLas® Insulation with PureFiber™ technology.
made with 99% natural** material and over 70%* recycled content, this
breakthrough in insulation technology is easy to install and safe for homeowners.
and now renovation projects can pay for themselves‡ because homeowners
can save up to 28%^ on heating and cooling costs and take advantage of up to
$5,000 in ecoeNergy† grants. so go green and use PINK™ in your next project.
Why choose EcoTouch™ PINK™ Insulation?
• Designed by a leader in energy efficiency
• Made from over 70%* recycled content – 3rd party SCS certified
• Made with 99% natural** materials
• GREENGUARD Indoor Air Quality CertifiedSM and formaldehyde-free
• Durable & dependable
tHe PINK PaNtHer™ & © 1964-2011 metro-goldwyn-mayer studios Inc. all rights reserved. the colour PINK is a registered trademark of owens Corning. © 2011 owens Corning. all rights reserved. *70% recycled content is based on the average recycled glass content in all owens Corning fiberglass batts, rolls and unbonded loosefill insulation manufactured in Canada. sCs certified. **made with a minimum of 99% by weight natural materials consisting of minerals and plant-based compounds. ‡Insulating levels recommended should result in energy savings over time above the cost of the insulating cost, however, if you buy too much insulation, it can cost you more than you save on energy bills. ^Up to 28% heating and cooling savings based on Hot 2000, version 8.7 run for a 2 storey 1972 type base house with 1149 sf per floor for an increase from r-8 to r-40 in the attic plus an increase from zero to r-20 in the basement walls in Canadian climates. ∆savings vary depending on original amount of insulation in your home, climate, house size, air leaks, and personal energy use and living habits. greeNgUard Children & schoolssm mark is a registered certification mark used under license through the greeNgUard environmental Institute. owens Corning PINK™ insulation is greeNgUard Certified for indoor air quality, except bonded loosefill products. this product has achieved greeNgUard Children & schools Certification and is verified to be formaldehyde free. © 2011 owens Corning. all rights reserved.
UP TO $5,000ECOENERGY† GRANTS
†www.ecoaction.gc.ca/homes
OCC-0213-11_ContAdvantAd_ECO.indd 1 11-09-28 11:55 AM