CONTENTSCONTENTS SOLUTION PROVIDER GRIP TAPE HUB PEDALS HEADSETS BB EPB System Performance Dual Fuction Trekking / Urban / City Road MTB Freeride / Downhill / BMX Junior Folding Exercise

CONTENTSSOLUTION PROVIDER

GRIP

TAPE

HUB

PEDALS

HEADSETS

BB

EPB System

Performance

Dual Fuction

Trekking / Urban / City

Road

MTB

Freeride / Downhill / BMX

Junior

Folding

Exercise

Cleat

Accessories / Toe Straps / Toe Clips

Head Tube Compatibility

Ultra Light Threadless Integrated

Threadless Intrgrated

Angle-Limited

Semi-Integrated Threadless

Threadless

Headset Accessories / Top Cover

Threaded

RR Series

Bottom Bracket

02

44

48

52

06

11

16

19

23

26

10

12

17

22

24

28

30

41

32

35

39

31

42

34

37

40

2 3

OURVALUESOLUTION PROVIDER

VP operates an Extrusion facility at our home factory complex in Taiwan. Many of the bicycle components that we produce rely on Extrusion to save cost and increase quality, so we have invested in a purpose-built factory building exclusively to extrude raw materials for further of varying size which have applications both inside and outside of the bicycle industry.

Steel and aluminum parts that must withstand prolonged high-stress use must be heat treated. No single treatment process is more important and has the same ability to effect the overall performance of the part. VP has its own in house heat treatment processes so that we can ensure that this critical step is done correctly.

At VP Die Casting is the go-to process when the main priorities for high volume projects are strength and low-cost. At our factories we have the capacity to die cast millions of sets of pedals each year. We can also process cast pedals in any number of ways from, burnishing, to high polishing, to painting. We can also combine a Die Cast pedal body with injection molding to create traction pads.

When the ultimate in strength is paramount VP is there with warm forging. We operate a purpose- built warm forging factory in Taiwan dedicated only to the production of high-end pedal bodies and safety equipment.

The axle is the heart of every pedal we produce. VP cold forges axles used in all of our pedals to ensure that the heart is as strong as it should be for a long life. We have invested in this key process at each of our production facilities where pedals are made. Our cold forging machines allow us to produce high-quality and durable axles on a massive scale to exact specification, quickly and efficiently.

A

E

C

D

B

IN-HOUSE EXTRUSION ALLOWS VP TO SAVE TIME, INCREASE QUALITY AND EXPAND THE KINDS OF PRODUCTS WE CAN PRODUCE.

IN HOUSE HEAT TREATMENT ALLOWS US TO CONTROL A CRITICAL PROCESS IN THE OVERALL STRENGTH AND SAFETY OF PRODUCTS PRODUCED IN OUR FACTORY.

DIE CASTING IS AN ESSENTIAL PART OF HIGH VOLUME PEDAL PRODUCTION WHERE DURABLE PRODUCTS CAN BE CONSISTENTLY AND COST-EFFECTIVELY PRODUCED.

WARM FORGING CREATES THE HIGHEST STRENGTH ALUMINUM PARTS FOR TOP LEVEL MTB PEDALS AND THE MOUNTAINEERING AND SAFETY EQUIPMENT INDUSTRY.

HIGH CAPACITY COLD FORGING AT VP IS AUTOMATED, QUICK, AND PRECISE TO PRODUCE STRONG PEDAL AXLES.

.

.

.

.

.

EXTRUSION

HEAT TREATMENT

DIE CASTING

WARM FORGINGFOR PEDAL BODY / CARABINER

COLD FORGING SPINDLES

4 5

OURVISIONEnhance the quality andinnovation continously.

VP is highly experienced at laser etching complex graphics onto objects. Laser etching is a very efficient way to add logos, images and other markings to a variety of objects in mass production.

KCRISP CLEAN AND MODERN GRAPHICS ON HIGH-VALUE PARTS ARE EASY TO ACHIEVE USING LASERS.

. LASER ETCHING

VP operates over 600 individual CNC Machines in its locations in Taiwan, China, and Vietnam. In our 30+ year history CNC Machining was one of the first processes we undertook, so we have a deep experience in using these machines to produce bike parts. At VP, we operate 3, 4 and even 5 axis CNC mills, as well as specially built machines that help us manufacture to the high standards which we are known for. When called for, we can CNC Machine with an accuracy of +/- .01mm. VP proudly uses CNC Machines made by DMG Mori, Okuma, which are capable of self checking for QC to add another level of control to our process.

VP has invested heavily over the decades in developing our in house capability to control metal surface treatment. We own our own facility dedicated to chrome plating (CP & UCP) and electrochemical deposition (ED) coating. These processes are crucial in improving chemical resistance of metals as well as improving mechanical properties like tensile strength, not to mention the striking visuals of chrome plated metals.

VP has options when it comes to products that must be coated for durability, weather resistance, and visual appeal. Both water based liquid paint and powder coating are environmentally friendly ways to add value to the finished piece.

VP has a well-established understanding of the proper way to add permanent graphics to complicated plastic and metal parts using the pad printing process. We are able to transfer images and logos to a variety of surfaces no matter f they are flat, cylindrical, spherical, have compound angles, textures, concave, or convex surfaces.

VP has been using plastic injection processes for over 30 years and our ability in this area has kept pace with advances in the field using cutting edge machinery and techniques to produce virtually any part possible. We can produce parts in high-volume no matter the complexity.

FI

G

J

H

VP USES CNC MACHINING EXTENSIVELY IN THE PRODUCTION OF PARTS FOR THE BICYCLE INDUSTRY.

IN HOUSE ELECTROPLATING LETS US CONTROL AN IMPORTANT STEP IN IMPROVING THE CHEMICAL, MECHANICAL, AND PHYSICAL PROPERTIES OF KEY COMPONENTS.

VP OPERATES ITS OWN POWDER COATING AND WATER BASED LIQUID PAINT LINES ENABLING US TO ENSURE A COLORFUL AND DURABLE FINISH.

THE EXACT APPLICATION OF GRAPHICS TO THE FINISHED PRODUCT IS AN IMPORTANT ELEMENT OF ITS OVERALL VALUE IN THE MARKET.

VP HAS A LONG STANDING EXPERTISE IN PLASTIC INJECTION MOLDING IN A VARIETY OF MATERIALS, FROM SIMPLE PLASTICS TO ADVANCED SILICONES AND CARBON FIBER.

.

.

.

.

.

CNC MACHINING

SURFACE TREATMENT

LIQUID AND POWER PAINTING

PAD PRINTING

PLASTIC INJECTION

EPB SYSTEM / PEDAL6 EPB SYSTEM / PEDAL 7

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

EPB SERIESEPB replaces loose ball bearings with

specially-engineered polymer bearings.

This system allpws improved function,

lower cost, and improved aesthetics.

THINNER BODY THAN LOOSE BALL MODELSREDUCED WEIGHTFEWER MOVING PARTS

BODYAXLEBEARINGSIZEREFLECTOR

One-piece PP body.7mm boron steel.EPB system.104 x 82 mm.Fineline included. TW

VPE-891 263g

BODY

AXLEBEARINGSIZEREFLECTOR

Barrel polished aluminum w/PP cage & inlaid TPE tread. 7mm boron steel.EPB system.104 x 82 mm.Fineline included. TW

VPE-623 322g

BODY


Extruded / CNC machined aluminum body inlaid Grip tread.7mm boron steel.EPB system.110.5 x 82.5 x 20.5 mm.Fineline included. TW

VPE-017P 410g


One-piece PP body inlaid TPE tread.7mm boron steel.EPB system.105.5 x 81 mm.Fineline included. TW

VPE-857 265g


Body ED black aluminum.7mm boron steel.EPB system.115.8 x 103.4 mm.Optional. TW

VPE-527 408g


One-piece PP body.7mm boron steel.EPB system.110.5 x 100.5 mm.Fineline included. TW

VPE-537 301g


Body ED black aluminum.7mm boron steel.EPB system.113.5 x 110.5 mm.Optional. TW

VPE-506 426g


ED black aluminum body.7mm boron steel.EPB system.95 x 66 mm.Fineline included. TW

VPE-465 290g


One-piece PP body inlaid Grip tread.7mm boron steel.EPB system.112 x 83.3 mm.Fineline included. TW

VPE-889P 310g

EPB SYSTEM / PEDAL8 EPB SYSTEM / PEDAL 9

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


ED black aluminum.7mm boron steel.EPB system.113.5 x 110.5 mm.Optional. TW

VPE-461 407g


One-piece PP body.7mm boron steel.EPB system.95.5 x 84.5 mm.Fineline included. TW

VPE-229 244g


One-piece PP body inlaid Grip tread.7mm boron steel.EPB system.97 x 86 mm.Fineline included. TW

VPE-227P 276g


One-piece PP body. TPE tread.7mm boron steel.EPB system.111 x 84 mm.Included. TW

VPE-899 280.5g

BODYCAGEAXLEBEARINGSIZEREFLECTOR

Black PP.ED black aluminum.7mm boron steel.EPB system.103 x 64.5 mm.Optional. TW

VPE-993 426g

PERFOMANCE / PEDAL10 DUAL FUNCTION / PEDAL 11

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

BODYAXLEBEARINGBINDINGCLEAT

SIZEREFLECTOR

Coated aluminum.CNC machined Cr-Mo.LSL & sealed ball bearings.Adjustable tension (80~140kgf-cm).VP-ARC5 & VP-ARC6 4.5 & 9 degree float (Optional: VP-BLK5 & VP-BLK6 fixed).86.5 x 77.5 mm.Optional. (VP-R2 black.) TW

VP-R75 325g

BODYAXLEBEARINGBINDINGCLEAT

SIZEREFLECTOR

Engineered composite.CNC machined Cr-Mo.LSL & sealed ball bearings.Adjustable tension (80~140kgf-cm).VP-ARC5 & VP-ARC6 4.5 & 9 degree float(Optional: VP-BLK5 & VP-BLK6 fixed).82 x 92 mm.Optional. (VP-R2 black.) TW

VP-R77 270g

BODYAXLEBEARINGBINDING

CLEATSIZE

Coated aluminum.CNC machined Cr-Mo.LSL & sealed ball bearings.Dual-sided, adjustable tension(80~160kgf.cm).VP-C51.83.5 x 58.5 mm. TW

VX-2000 403g


CLEATSIZE

Coated aluminum.CNC machined Cr-Mo.Roller & double sealed Ball bearings.Dual-sided, adjustable tension(80~160kgf.cm).VP-C51.83.5 x 75.5 mm. TW

VX-2500 439g


CLEATSIZE

Coated aluminum.CNC machined Cr-Mo.Ball bearings.Dual-sided, adjustable tension(80~160kgf.cm).VP-C51.81 x 58.5mm. TW

VX-1001 396g

BODYAXLEBEARING

CLEATSIZEREFLECTOR

Coated aluminum.CNC machined Cr-Mo.LSL & sealed ball bearings. (80~140kgf.cm). VP-C51.89 x 99 mm.Optional. TW

VP-R62 400g

BODYCAGEAXLEBEARINGBINDING

CLEATSIZEREFLECTOR

Barrel polished aluminum.ED black aluminum, cage flip.CNC machined Cr-Mo.LSL & sealed Ball bearings.Single-sided, adjustable tension (80~140kgf.cm).VP-C51.103 x 63 mm.Optional. TW

VP-X82 385g

BODYCAGEAXLEBEARINGBINDING

CLEATSIZEREFLECTOR

Barrel polished aluminum.ED black aluminum.CNC machined Cr-Mo.Ball bearings.Single-sided, adjustable tension (80~140kgf.cm).VP-C51.103 x 63 mm.Optional. TW

VP-X92 470g

BODY

CAGEAXLEBEARINGBINDING

CLEATSIZEREFLECTOR

Barrel polished aluminum w/TPE non-slip insert.ED black aluminum.CNC machined Cr-Mo.Ball bearings.Single-sided, adjustable tension (80~140kgf.cm)VP-C51.103 x 63 mm.Optional. TW

VP-X93 466g

PERFOMANCE DUAL FUNCTION

The VP-R77 is our sleek new road pedal with a

wide platform for power transfer and the most

stable inter- face available anywhere. Thanks

to our patented split cleat which allows you to

change the front and rear pieces separately.

ENGINEERED COMPOSITE BODYSTABLE POWER TRANSFERSMOOTH BEARINGS

TREKKING/URBAN/CITY / PEDAL12 TREKKING/URBAN/CITY / PEDAL 13

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

TREKKING / URBAN / CITYModern, commuting and riding with style

Clean and simple desgin with best function

and durability for urban, trekking and E-bikes.

BODY


Barrel polished one-piece aluminum, inlaid TPE tread. Boron steel.Ball bearings.108 x 69 mm.Included. TW/CN

VP-608 396g

BODY


Barrel polished aluminum,inlaid TPE tread.7mm boron steel.Ball bearings.107.5 x 68.5 mm.Included. TW

VP-628 370g


One-piece nylon body inlaid Grip tread.CNC machined Cr-Mo.LSL & sealed ball bearings.111 x 87 x 20 mm.Fineline included. TW

VP-831P 346g


One-piece PP body inlaid Grip tread.7mm boron steel.Ball bearings, extended cup.111 x 87 x 23 mm.Included. TW

VP-836 348g

The NEW Grip Pedal and latest innovation for Urban, Trekking

and E-Bike. Our state-of-the-art design, thin pedal adds best

performance for stylish bikes and urban riders.

With the G-shaped sand paper Grip zone, the pedal

supports any flat sole shoes or leather shoes best.

BODY


Barrel polished aluminum w/PP cage & inlaid TPE tread.7mm boron steel.Ball bearings.111 x 80 mm.Included. TW

VP-617 365.5g

BODY

AXLEBEARINGSIZEREFLECTOROPTIONS

Barrel polished aluminum,w/PP cage & inlaid TPE tread.CNC machined Cr-Mo.LSL & sealed ball bearings.100 x 80 mm.Included. TWVP-613 Ball bearings.VP-183(Q50) Quick release system

VP-183 260g

BODY


Barrel polished aluminum,inlaid TPE tread.9mm boron steel.Ball bearings.112 x 71 mm.Included. TW

VP-658 370g

TREKKING/URBAN/CITY / PEDAL14 15


One-piece PP body inlaid TPE tread.7mm boron steel.Ball bearings.111 x 80 mm.Included. TW

VP-821 328g

BODYAXLEBEARINGSIZEREFLECTOROPTION

One-piece PP body inlaid TPE tread.7mm boron steel.Ball bearings, extended cup.107 x 100 x 24 mm.Fineline included.VP-571 One-piece PP body.TW

VP-573 300g

BODYAXLEBEARINGSIZE

Titanium 6AL/4V.CNC machined Titanium 6AL/4V.LSL & Double sealed ball bearings.100 x 105 mm. TW

BLADE 268g

BODY


One-piece black or gray PP,inlaid TPE tread.Boron steel.Ball bearings.109 x 72 mm.Included. TW/CN

VP-810 392g


One-piece PP body.7mm boron steel.Ball bearings, extended cup.100 x 80 mm.Included. TW/CN

VP-898 230g

TREKKING/URBAN/CITY / PEDAL

MTBROAD

ROAD / PEDAL16 MTB / PEDAL 17

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


CP steel, black PVC rubber blocks.Boron steel.Ball bearings.119 x 80 mm.Included. TW/CN

VP-813 620g

BODYCAGEBEARINGSIZEREFLECTOR

UCP Steel.Boron steel.Ball bearings.119 x 67 mm.Optional. TW

VP-378 500g

BODYCAGEAXLEBEARINGSIZEREFLECTOROPTION

Barrel polished aluminum.Barrel polished aluminum.Boron steel.Ball bearings.111 x 60 mm.Optional. TWVP-365T assembled with toe-clips VP-712 & leather strap VP-715. TW

VP-365 350g

BODYAXLEBEARINGSIZETOE CLIPREFLECTOROPTION

One-piece PP body.7mm boron steel.Ball bearings, extended cup.91 x 140 mm.Nylon VP-713 & strap VP-702NLT.Fineline included. TWVP-335 With out Top clip & Strap 212g/pr.

VP-335T 302g


One-piece black PP, grip nodes.Boron steel.Ball bearings.108 x 86 mm.Included. TW/CNVP-872N toe-clip not attachable. 322 g/pr. CN VP-872B w/o bearings; steel axle. 282 g/pr. CN

VP-872 309g


One-piece PP body.7mm boron steel.Ball bearings, extended cup.105 x 85 mm.Included. TW

VP-895 280g

BODYCAGEAXLEBEARINGSIZETOE CLIPREFLECTOROPTION

Barrel polished aluminum.Ano Silver or ED black aluminum.CNC machined Cr-Mo.Ball bearings.97 x 63 mm.Attachable.Fineline optional. TWVP-195 LSL & sealed ball bearings.98 x 64 mm, 270 g/pr.

VP-195E 250g

BODYCAGEAXLEBEARINGSIZETOE CLIPREFLECTOR

Barrel polished aluminum.ED black aluminum, cage flip.7mm CNC machined Cr-Mo.LSL & sealed Ball bearings.97 x 63 mm.Attachable.Optional. TW/CN

VP-196 264g

FREERIDE / DOWNHILL / BMX

MTB / PEDAL18 FREERIDE/DOWNHILL/BMX / PEDAL 19

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


Barrel polished aluminum.7mm boron steel.Ball bearings.101 x 79 mm.Optional. TW

VP-469 368g


ED black aluminum.7mm boron steel.Ball bearings.95 x 66 mm.Fineline optional. TW

VP-465 290g

BODY


Extruded / CNC machined aluminum platform, replaceable grip pins.CNC machined Cr-Mo.LSL & Double sealed ball bearings.112 x 97 x 16 mm.Optional. TW

VP-001 350g

BODY

AXLEBEARINGSIZE

Extruded / CNC machined aluminum platform, replaceable grip pins.CNC machined Cr-Mo.LSL & Double sealed ball bearings.106 x 96 x 16 mm. TW

VP-015 406g

BODY

AXLEBEARINGSIZE

Cold-forged one-piece CNC aluminum replaceable grip pins.CNC machined Cr-Mo.AFC System.105 x 100 x 18 mm. TW

VP-DH7 365g

BODY

AXLEBEARINGSIZETOE CLIPREFLECTOR

Cold-forged one-piece aluminum,bead blasted, black or silver.CNC-machined Cr-Mo.LSL & sealed ball bearings.98 x 62 mm.Attachable.Optional. TW

VP-197 272g

20 21

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

BODYAXLEBEARINGSIZE

Barrel polished aluminum.CNC machined Cr-Mo.LSL & Double sealed ball bearings.113.5 x 103.5 mm. TW

VP-503 445g

BODYAXLEBEARINGSIZE

One-piece nylon body.CNC machined Cr-Mo.LSL & Double sealed ball bearings.112 x107 mm. TW

VP-532 360g


Barrel polished aluminum.CNC machined Cr-Mo.LSL & double sealed ball bearings.105 x 102 x 20 mmFineline optional. TWVP-531E ball bearings.

VP-531 385g


One-piece polycarbonate.Boron steel.Ball bearings.114 x 97 mm.Optional. TW

VP-577 450g


One-piece nylon body.CNC machined Cr-Mo.LSL & Double sealed ball bearings.111 x 105 x 25.5 mm.Fineline included. TW

VP-538 290g


Long fiber glass reinforced nylon.CNC machined Cr-Mo.LSL & double sealed ball bearings.113.5 x 110 x 18 mm.Fineline included. TW

VP-539 380g


One-piece nylon body.7mm boron steel.Ball bearings, extended cup.111 x 105 x 25.5 mm.Fineline included. TWVP-536 one-piece PP body. TW/CN

VP-535 346g

FREERIDE/DOWNHILL/BMX / PEDALFREERIDE/DOWNHILL/BMX / PEDAL

JUNIOR / PEDAL22 FOLDING / PEDAL 23

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

FOLDINGJUNIOR


Long fiberglass reinforced nylon.CNC machined Cr-Mo.LSL & Double sealed Ball bearings.93 x 86 x 18 mm.Fineline included. TW

VP-227 280g

BODYAXLESIZEREFLECTOR

Fiberglass reinforced nylon body & cage.DAS System axle.103.5 x 82 mm.Included. TW

VP-F65 410g

BODY


Fiberglass reinforced nylon.Cage fiberglass reinforced nylon.Boron steel.Ball bearings.107 x 69.5 mm (49 x 69.5 mm folded).Included. TW/CN

VP-F55 424g


One-piece PP body.Boron steel.Ball bearings.93 x 87 mm.Included. TW

VP-225 300g


One-piece black PP.Boron steel.Ball bearings.90 x 65 mm.Included. TW/CNVP-213B w/o bearings CN.

VP-213 280g

DAS replaces traditional axle and bearings with a more

robust hollow axle and polymer bearings. This system is

overall stronger, longer lasting, and easier to service. DAS

is the answer for bikes that need pedals with long service

life and easy maintenance.

VP DAS SYSTEM

MORE LONG TERM DURABILITY

FEWER PARTS AND EASY SERVICE

RESISTANT TO ELEMENTS AND ABUSE

EXERCISE / PEDAL24 EXERCISE / PEDAL 25

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

EXERCISEThe VP-S5 is our NEW designed exercise pedal.

We’ve increased the platform for more comfort and

performance during the workout.

The platform for more comfort.

SINGLE RELEASE

CLEAT

MULTI-USE

VP-C51

SPD

BODYAXLEBEARINGBINDINGTOE CLIPSIZE

Coated aluminum body.CNC machined Cr-Mo.DU & Roller & Sealed bearings.VP-C51 compatible Single-sided adjustable tension.Nylon toe Clip VP-792 & strap VP-702NLT.115.5 x 100 mm.

VP-S5 485g

BODY

AXLEBEARING

SIZETOE CLIPREFLECTOROPTION

Barrel Polished one-piece aluminum.Cage ED black aluminum.Oversize CNC Machined Cr-Mo.Oversize 5/32” ball bearings.Bearing FRP & Single sided adjustable tension.153 x 100 mm.Toe Clip attachable.Attachable.VP-S2A without binding. TW

VP-S2 526g

BODY

AXLEBEARINGSIZETOE CLIPREFLECTOR

Barrel polished aluminum.Cage barrel polished aluminum.ED black steel.Ball bearings.102 x 63 mm.Toe Clip VP-792 & strap VP-702NLT.Optional. TW/CN

VP-518ST 458g

BODYAXLEBEARINGSIZE

Wide one-piece black PP.Boron steel.Ball bearings.140 x 135 mm. CN

VP-455 880g

CLEAT / PEDAL26 CLEAT / PEDAL 27

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

This innovative new cleat delivers top level power transfer

and can be easily replaced in EXACTLY the same position on

your shoe every time. Thanks to our patented split cleat you

can maintain proper cleat placement and maintain the fit that

delivers your best power and performance.

SPD-SL® Compatible VP-BLK-SL (0º) / VP-ARC-SL (6º)

VP split cleats have soft traction surfaces for walking,

and Teflon inserts for smooth float.

SPLIT CLEAT

Split Cleat

VP SPLIT CLEATS SIMPLY GENIUSQUICK AND EXACT REPLACEMENTKEO® AND SPD-SL® VERSIONS

Kéo® Compatible VP-BLK6 (0˚) / VP-ARC6 (4.5˚) / VP-ARC6 (9˚)Compatible with VP-R series.

ANTI-SLIP DESIGN.EASY TO PUT ON AND TAKE OFF.COMPATABLE WITH KEO CLEAT.

VP-CVR KEO 75.2g

INTERCHANAGEABLE REAR FLOAT. ADJUSTMENT.FIXED FLOAT.

VP-BLK6 0˚ 47.8g

FIXED FLOAT.

VP-BLK5 0˚ 45.2g

ANTI-SLIP DESIGN.EASY TO PUT ON AND TAKE OFF.COMPATABLE WITH SHIMANO SL CLEAT.

VP-CVR SL 89.4g

6˚ FLOATShimano SPD SL Compatible.

VP-ARC SL 6˚ 53.6g

FIXED FLOATShimano SPD SL Compatible.

VP-BLK SL 0˚ 53.6g

INTERCHANAGEABLE REAR FLOAT.ADJUSTMENT.4.5 DEGREE FLOAT.

VP-ARC6 4.5˚ 47.6g

4.5 DEGREE FLOAT.

VP-ARC5 4.5˚ 45g

INTERCHANAGEABLE REAR FLOAT. ADJUSTMENT.9 DEGREE FLOAT.

VP-ARC6 9˚ 47.2g

9 DEGREE FLOAT.

VP-ARC5 9˚ 44.5g

CLEAT

CLEAT & ACCESSORIES / PEDAL28 TOE STRAPS & TOE CLIPS / PEDAL 29

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

SINGLE RELEASE.COMPATIBLE.M Series / S Series / VX Series.

VP-C51MULTIPLE RELEASE.COMPATIBLE.M Series / S Series / VX Series.

VP-C56ANTI-SLIP DESIGN.EASY TO PUT ON AND TAKE OFF.COMPATIBLE WITH SHIMANO SPD CLEAT Weight: 29.4 g/pr.

VP-CVR SPD

9 DEGREE FLOAT/ FIXED FLOAT.CLEAT COMPATIBLEwith Look delta pedals. TW.

VP-ACR1/ VP-BLK1

for use withVP-001 / VP-015 / VP-531 / VP-531E / VP-535 / VP-536 / VP-538

VP-730

REFLECTOR

Bolt on-reflector Snap-in reflector Built-in reflector Fineline snap-in reflector Fineline built-in reflector

CARTRIDGE AXLE for R Series.

VP-EP4REFLECTORfor VX Series.

VP-R5

LEATHERSIZEWEIGHT

13 mm430 mm100 g/pr. TW

VP-702NLTSTAINLESS BUCKLE MTB/ROAD TOE STRAP

LEATHERSIZEWEIGHT

13 mm400 mm44 g/pr. TW

VP-715STAINLESS BUCKLE MTB/ROAD TOE STRAP

MEDLGE

84 g/pr.94 g/pr.

VP-712RETRO STYLE CP STEEL ROAD/URBAN TOE CLIP

MEDLGE

32 g/pr.34 g/pr. TW

VP-706LIGHTWEIGHT ROAD TOE CLIP WITH DURABLE NYLON MATERIAL.

MEDLGE

64 g/pr.76 g/pr. TW

VP-732LARGE PLATFORM MTB TOE CLIP WITH DUABLE NYLON MATERIAL.

MEDLGE

62 g/pr.64 g/pr. TW

VP-796IN-BUILT REFLECTOR MTB TOE CLIP WITH DURABLE NYLON MATERIAL.

VP-700FIN-BUILT REFLECTOR MTB/URBAN TOE CLIP /STRAPLESS DESIGN, PLATFORM TREAD, WITH DURABLE NYLON MATERAIL64 g/pr. TW

ULTRA LIGHT

COMPATIBILITY / HEADSET

FOR ROAD

FOR ROAD / MTB

FOR ROAD / MTB

FOR ROAD / MTB

FOR ROAD / MTB

IntegratedSemi-IntegratedSlimstak1.5 standard

FOR ROAD / MTB

FOR ROAD / MTB

FOR ROAD / MTB

FOR ROAD / MTB

FOR MTB / FREERIDE / DOWNHILL

30 ULTRA LIGHT / HEADSET 31

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

The drawings show general specifications and

are a guide only. The drawings should not be

used for detailed frame specifications.

Types covered are :HEAD TUBECOMPATIBILITY

SIZEMATERIALFINISHDIAMETERSTACK HEIGHTBEARINGSET

1-1/8” or 1” upper 1-1/4” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 / Ø30.2.9 mm Sealed bearing.5 pc.

VP-B100AC 43g

1” STEERERVP-F001 SERIES

1” STEERERVP-A01 SERIES /VP-A02AC /VP-A05AC / MH-003 SERIES

1” and 1-1/8” STEERERVP-F101 / F102 SERIES

1-1/8” STEERERVP-A45AC / VP-Z101AC / VP-Z118AC / VP-Z104 SERIES / VP-Z108 SERIES

1” and 1-1/8” STEERERVP-F201 / F202 SERIES

1-1/8” + 1-1/4” STEERERVP-A90ACE / VP-J151AD /VP-C701AM

1-1/4” and1-1/8“ + 1-1/4” STEERERVP-F302AC / VP-B151AC

1-1/8” + 1-1/2” STEERERVP-J203 SERIES / VP-J205 SERIES

1-1/8” + 1-1/2” and1-1/4“ + 1-1/2” STEERERVP-B303AC / VP-B451AC

1-1/8” + 1-1/2” STEERERVP-A93 SERIES /VP-A97 SERIES /VP-A98 SERIES / VP-Z201AM /VP-T501AC


1-1/8” or 1-1/8”upper 1-1/2”lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 - Ø49 / Ø39.8.3.0 mm Sealed bearing.5 pc.

VP-B300AC 46g

THREADLESS INTERGRATED / HEADSET32 THREADLESS INTERGRATED / HEADSET 33

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

SIZEMATERIALFINISHDIAMETERSTACK HEIGHTBEARINGSETOPTION

1-1/8”.Aluminum.Anodized black or silver.Ø28.6 / Ø41 / Ø30.9.3+0.7=10Sealed bearing (MH-P03).4 pc.VP-F101AMSemi-cartridge (MH-P03M). TW

VP-F101AC 66.5g


1-1/8”.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 / Ø30.10.7+0.4=11.1Sealed bearing (MH-P08).5 pc.VP-F202AMSemi-cartridge (MH-P08M). TW

VP-F202AC 66g


1-1/8” upper + 1-1/4” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41 - Ø46.9 / Ø33.9.3+0.7=10Sealed bearing (MH-P03 / P22)4 pc.VP-B101AMSemi-cartridge (MH-P03M / P22M). TW

VP-B101AC 79.5g


1-1/8” upper +1-1/2” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 - Ø52 / Ø39.8.10.7+0.7=11.4Sealed bearing (MH-P08 / P16).5 pc.VP-B303AMSØ28.6 / Ø41.8 - Ø52 / Ø30. TW/CN

VP-B303AC 83g


1-1/4” upper + 1-1/2” lower.Aluminum.Anodized black or silver.Ø31.8 / Ø41.8 - Ø52 / Ø39.815.7+0.7=16.4 Sealed bearing (MH-P27 / P25)5 pc. TW

VP-B451AC 79g


1-1/8” upper + 1-1/2” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 - 51.8 / Ø39.810.7+0.6=11.3 Sealed bearing (MH-P08 / P28K)6 pc.

VP-B402AC 77.8g


1-1/8” upper + 1-1/4” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø41.8 - Ø46.9 / Ø3310.7+0.8=11.5 Sealed bearing (MH-P08 / P22)5 pc.VP-B151AMØ28.6/Ø41.8-Ø46.9/Ø30. TW

VP-B151AC 80g


1-1/4”.Aluminum.Anodized black or silver.Ø31.8 / Ø41.8 - Ø46.9 / Ø33.15.7+0.7=16.4 Sealed bearing (MH-P27 / P22).5 pc. TW

VP-F302AC 82.1g


1”.Aluminum.Anodized black or silver.Ø 25.4 / Ø41.8 / Ø30.10.7+0.4=11.1Sealed bearing (MH-P08).5 pc. VPF-202AMSemi-cartridge (MH-P08M). TW

VP-F001AC 66g

ANGLE-LIMITED / HEADSET34 SEMI-INTEGRATED THREADLESS / HEADSET 35

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


1-1/8” upper + 1-1/2” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø44 - Ø56 / Ø39.8.17.9+3.3=21.2mmSemi-cartridge bearing (MH-P03M / P16M).7 pc.

LA-Z30AM 116.5g


1-1/8”.Aluminum.Anodized black or silver.Ø28.6 / Ø44 / Ø30.17.9+2.5=20.4mmSemi-cartridge bearing (MH-P03M).7 pc.

LA-Z01AM 98g


1-1/8”.Aluminum.Anodized black or silver.Ø28.6 / Ø44 / Ø30.8.4+3.4=11.8Sealed bearing (MH-P03).6 pc. VP-Z101AM Semi cartridge (MH-P03M). TW

VP-Z101AC 82.5g

SIZEMATERIALFINISHDIAMETERSTACK HEIGHTCOVER OPTIONSBEARINGSET

1-1/8”.Plastic cover, steel cups.ED black.Ø28.6 / Ø44 / Ø30.20.5+3.2=23.710/15/20 mm.Sealed bearing (MH-P03).7 pc. TW

VP-Z108PC 117g


1-1/8”.Aluminum cover, steel cup.Anodized black or silver.Ø28.6 / Ø41.4 / Ø30.18.2+4.9=23.1.Sealed bearing (MH-P04).7 pc. VP-A01E (Caged bearing).SH 6. TW

VP-A05AC 73g

SIZEMATERIALFINISHDIAMETERSTACK HEIGHTCOVER OPTIONSBEARINGSETOPTION

1-1/8”.Plastic cover, steel cups.ED black.Ø28.6 / Ø44 / Ø30.20.8+3.7=24.510/15/20 mm.Caged (5/32” x 22A).10 pcVP-Z104PD Semi-cartridge MH-P12. TW

VP-Z104PE 112g

ANGLE-LIMITED SEMI-INTEGRATEDTHREADLESS

EMI-INTEGRATED THREADLESS / HEADSET36 THREADLESS / HEADSET 37

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


1-1/8” upper + 1-1/2“ lower.Aluminum cover, steel cups.Anodized black or silver.Ø28.6 / Ø44 - Ø55 / Ø39.8.20.8+3.3=24.1Caged (5/32” x 22A / 3/16” x 23A).9 pc.VP-J203PE Nylon cover.Ø28.6 / Ø44 - Ø55 / Ø39.8 TW

VP-J213AE 162g

SIZEMATERIALFINISHDIAMETERSTACK HEIGHTSPACERBEARINGSETOPTION

1-1/8” upper + 1-1/2” lower.Aluminum.Anodized black or silver.Ø28.6 / Ø44 - Ø56 / Ø39.812.9+3=15.910/15/20 mm.Sealed bearing (MHP03 / P16).7 pc.VP-J305AM Semi-cartridge (MH-P03M / P16M). TW/CN

VP-J305AC 117g


1-1/8” upper + 1-1/4” lower.Aluminum cover.Anodized black or silver.Ø28.6 / Ø44 - Ø50.6 / Ø335.5+3=8.5Sealed bearing (MH-P03 / P22).5 pc.

VP-J151AC 120g


1-1/8”Aluminum cover.Anodized black or silver.Ø28.6 / Ø49.7 / Ø308.3+3.4=11.7.Sealed bearing (MH-P03).6 pc.VP-Z201AM Semi-cartridge (MH-P03M). TW

VP-Z201AC 113.8g


1-1/8”.Aluminum cover, steel cups.ED BlackØ28.6 / Ø34 / Ø30.21.8+10.8=32.6 Caged (5/32” x 20A).10 pc.VP-A88 SH 21.8. TW/CN

VP-A88A 119g


1-1/8”.Steel.ED black or CP.Ø28.6 / Ø34 / Ø30.12+11=23Caged (5/32” x 20A)9 pc.VP-A76CGSemi-cartidge (5/32" x 22A) (SH 25.7, 5 pc, 139 g). TW/CN

VP-A71 112g


1”.Aluminum.Anodized black or silver.Ø25.4 / Ø30 / Ø27 or Ø26.4.14+11.5 = 25.5 Caged (5/32” x 16A).9 pc.VP-A14A Ø25.4 / Ø30.2 / Ø26.4 or Ø27 VP-A13AC Sealed bearing (MH-P09K), SH 26.5 VP-A13AE, Steel upper cup. TW/CN

VP-A13A 91g


1-1/8”.Aluminum Cover, steel cup.ED black or CP.Ø28.6 / Ø34 / Ø30.26.1+10.2=36.3 w/15mm conical cover.Semi-cartridge (1/8” x 25B)5 pc.VP-A77C Standard cover, SH 23.4 VP-A79 Standard cover, SH 21.4. caged bearing (1/8” x 25B). TW/CN

VP-A77CK 110g


1-1/4” upper + 1-1/2” lower.Aluminum.Anodized black or silver.Ø31.8 / Ø44 - Ø56 / Ø39.810.3+3.2=13.5Sealed bearing (MH-P27 / P16).7 pc.VP-J308AM Sealed bearing / Semi-cartridge (MH-P27 / P16M). TW

VP-J308AC 120g

THREADLESS

THREADLESS / HEADSET38 HEADSET ACCESSORIES/TOP COVER / HEADSET 39

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB


1”.Steel.ED black, CP or satin.Ø25.4 / Ø30 / Ø27.14+11=25Semi-cartridge (1/8” x 24A).9 pc.VP-A31 Ø25.4 / Ø30 / Ø27 or Ø26.4. SH 22. Caged (5/32” x 16A).VP-A32 25.4 / 30.2 / 26.4. SH 22VP-A34C Semi-cartridge (1/8” x 24A). Ø25.4 / Ø30.2 / Ø26.4, SH 25, TW/CN

VP-A33C 95g


1-1/8”.Aluminum.Anodized black or silver.Ø28.6 / Ø34 / Ø30.16.7+11.9=28.6Sealed bearing (MH-P03).6 pc.VP-T201AM Semi-cartridge (MH-P03M). TW

VP-T201AC 92.5g


1-1/2”.Aluminum.Anodized black or silver.Ø38.1 / Ø49.7 / Ø39.76.16.6+12.2=28.8.Sealed bearing (MH-P25).6 pc.VP-T501AMØ38.1 / Ø49.7 / Ø39.76. Semi-cartridge (MH-P25KM). TW/CN

VP-T501AC 155g


1-1/8”.Aluminum cover,Cr-Mo cups.ED black or CP.Ø28.6 / Ø34 / Ø30.17+13.5=30.5. Caged, (5/32” x 22A / 1/4”x15B)10 pc. TWVP-A75F1 Sealed bearings (MH-P03K / P15) SH 28.1

MONSTA VP-A75F 200g


1-1/8”.Steel.ED black, CP or satin.Ø28.6 / Ø34 / Ø30.16.5+11.5=28Caged (5/32” x 22A).9 pc.VP-A73F Economical version SH 24. TW/CN

VP-A74F 130g

Forged alloy top cap, w/bolts and star nut.

M-53D 23.8g

Ultra light style CNC alloy top cap, w/flat head bolts and star nut.

M-50D 20.5g

Flat style forged CNC alloy top cap, w/flat head bolts and star nut.

M-52D 26.5g

Carbon top cap, w/spring and expansion nut.

M-6RXL 27g

Conical top covers that function as spacers and completely

replace the top cover to give a clean functional look are

available in heights 15 / 20 / 25 / 30 mm.

Straight wall spacers are available in heights: 5 mm / 10 mm / 20 mm.

CONICAL TOP COVER

STRAIGHT WALL SPACERS

MH-S73A for VP-A01E / A41AC Series 1-1/8” aluminum.

MH-S61AC 1-1/8” alloy (OD 34mm) TW/CN.

MH-S100P for VP-J203PE / Z104 Series 1-1/8” nylon.

MH-S65PC 1-1/8” polycarbonate (OD 35mm) TW.

MH-S104A MH-S100P

MH-S104A for VP-A88 / A71 Series.

MH-S65AC 1-1/8” alloy (OD 35mm) TW/CN.

MH-S73A

MH-S73SA

MH-S74A

Model

1-1/8”

1-1/8”

1-1/8”

10mm

8mm

10mm

VP-A01E / A41AC Series

VP-A41AC / A68

VP-A01ACG

ALUMINUM

ALUMINUM

ALUMINUM

Specifications Height Headset ModelMaterial

15mm

10mm

15mm

30mm

12mm

20mm

15mm

25mm

20mm

30mm

M-52D

M-7XL

M-10

Model1-1/8" aluminum

1" carbon

1.5"

double star-nut

spring/grooved expansion nut


cold-forged AI

AI CNC machined

AI CNC machined

25.4

20

34

26.5g

32g

64g

Steerer Fixing Device CapSteerer ID Weight

M-53D

M-6R

M-15

1-1/8" steel

1-1/8" Cr-Mo

1.5"

double star-nut

spring/expansion nut

double star-nut

cold-forged AI

carbon

AI CNC machined

25.4

25.4

34.8-35.6

23.8g

39g

50g

M-3D

M-6RL

1" steel

1-1/8" carbon

double star-nut


AI CNC machined

carbon

22.2

23.6

22.2g

27g

M-7

M-7R

M-8D[BMX]

M-7RL

1" steel

1" Cr-Mo

spring/expansion nut


AI CNC machined

carbon

22.2

22.2

38g

31g

1-1/8" steel

1" carbon

double star-nut


AI CNC machined

carbon

25.4

20

44g

21g

MD=die cast M=CNC machined D (after number) = double star nut

THREADED / HEADSETS40 RR SERIES / BB 41

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

RR SERIES

SIZE MATERIALFINISHDIAMETERSTACK HEIGHTBEARINGSET

1-1/8” x 26 TPI.Aluminum.Anodized black or silver.Ø25.4 / Ø44 / Ø30.32+3=35.Semi-cartridge (MH-P12).6 pc. TW/CN

MH-306AC 145g


1-1/8” x 26 TPI.Aluminum.Anodized black or silver.Ø25.4 / Ø41.8 / Ø30.21.9+0.5=22.4Sealed bearing (MH-P08F).6 pc. TW

MH-310AC 88g

THREADAXLESHELLFINISHWEIGHT

BC1.37 x 24T24mm througt.For Road to fit 68mm.Anodised aluminum cups.75g (w/o spacer)

RR-BSAR-24 75g

AXLESHELLCUPS

WEIGHT

24mm througt.68mm46mm (OD),Anodised aluminum cups.75g

RR-PF30-24 75g

THREADAXLESHELL

FINISHWEIGHT

BC1.37 x 24T24mm througt.One size for MTB fit both 68mm and 73mm.Anodised aluminum cups.75g (w/o spacer)

RR-BSAM-24 75g

AXLESHELLCUPS

WEIGHT

24mm througt.86.5mm46mm (OD),Anodised aluminum cups.82g

RR-BB386-24 82g

AXLESHELLCUPS

WEIGHT

24mm througt.68mm.46mm(OD),Anodised aluminum cups.78g

RR-BBR-PF24 78g

AXLESHELLCUPS

WEIGHT

24mm througt.86.5mm41mm (OD),Anodised aluminum cups.62g

RR-BB86-24 62g

This is the way to reduce inner diameter from 24 mm to 22 mm.

RR-BA01


BC1-1/8” x 26 TPI.Steel.ED black or CP.Ø25.4 / Ø44 / Ø30.15.2+3=18.2Caged (5/32” x 22A).9 pc.MH-003C SIZE: 1”. Ø22.2 / Ø41.4 / Ø27 or 26.4. SH 22.7 MH-305C Semi-cartridge bearings (5/32” x 22A).SH 20.5. TW/CN

MH-308E 153g


BC1-1/8” x 26 TPI.Steel.ED black or CP.Ø25.4 / Ø34 / Ø30.23.5+11.3=34.8.Caged (5/32” x 20A).9 pc.MH-503C Semi-cartridge (5/32” x 22A). TW/CN

MH-501 160g


BC1” x 24 TPI.Steel.ED black or CP.Ø22.2 / Ø30 / Ø27.23+10.5=33.5.Caged (5/32” x 16).9 pc.VP-H692 SH 36.5. TW/CN

VP-H692W 136g


BC1” x 24 TPI.Steel.ED black or CP.Ø22.2 / Ø30 / Ø27.24.5+10.5=35.Caged (5/32” x 16).8 pc.VP-H733 Key washer. TW/CN

VP-H732 126g

Rapid Refresh is a patented VP system that

makes bottom brackets easily serviceable

and user friendly. Thanks to the RRS Series the

user can quickly refresh their bottom bracket

bearings without special BB tools. Retailers

can also service more customers with less

inventory than with traditional BB systems.

RAPID REFRESH SYSTEM

BOTTOM BRACKET / BB42 BOTTOM BRACKET / BB 43

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

THREADAXLEFINISH

BC1.37” x 24T.Boron steel.Black cups & sheath.

VP-BC77P 262g

SEALED BEARING WITH POLYCABONATE SHEATH/ GLASS FIBER REINFORCED NYLON CUPS.

THREADAXLEFINISHOPTION

BC1.37” x 24T.SCM 440 hollow Cr-Mo.Anodized chromica aluminum sheath and cups.MB-604 4 sealed bearings for downhill. TW

MB-602 225g

ISIS DRIVE SPLINED BB/ SEALED BEARING WITH ALUMINUM SHEATH/ COLD-FORGED ALLOY CUPS.

THREADAXLEFINISH

BC1.37” x 24T.Boron steel.Barrel polished sheath, phosphated cups. TW/CN

VP-BC75T 290g

ALUMINUM SHEATH DESIGNED FOR INTERNALLY WIRED FRAMES. SEALED BEARING WITH ALUMINUM SHEATH/ COLD-FORGED STEEL CUPS.

THREADBEARINGS

BC1.37”x 24TPI.Caged (1/4”x9). TW/CN

VP-B32

BOLT TYPE

THREADBEARINGSFINISHWEIGHT

UNF24T.Caged (5/16”x9).Black coating/UCP.283g. TW/CN

VP-B35 283g

FOR BMX ONE-PIECE CRANK.

THREADAXLEFINISHOPTION

BC1.37” x 24T.Boron steel.Phosphated cups, anodized sheath.VP-BC73C for chain guard stay mount plate. VP-BC73A Cold forged aluminum cups. VP-BC73E for front derailleur BB mount plate. VP-BC73T Axle with chainline stopper ring.

VP-BC73 155g

SEALED BEARING WITH ALUMINUM SHEATH/ COLD-FORGED STEEL CUPS.

Bracket Width 68 68 68 68 6868 68A 25.5 26.5 28.5 29 2928.5 34C 25.5 25.5 26 27.5 30.529.5 35

Axle Length 118 120 122.5 124.5 127.5126 137

Bracket Width 100 100A 24.5 29.5C 30 34.4

Axle Length 154.5 164

Bracket Width 68 68 68 68 68 68 6868 6868 68 68A 18 21.5 21.5 23 23.5 27 2722.5 26.524.5 26.5 32C 21 21 23.5 24 26.5 29.5 32.525.5 2827.5 31.5 37

Axle Length 107 110.5 113 115 118 124.5 127.5116 122.5120 126 137

Bracket Width 68 68 68 68 68 6868 6868 68A 18.5 22 22 23.5 25 2725 2726.5 27.5C 20.5 20.5 23 23.5 27 3125 29.528 32

Axle Length 107 110.5 113 115 120 126118 124.5122.5 127.5

Bracket Width

Model

68

3LB

70

5TB

68

3AB

68

3PB

68

3PLB

68

3SB

70

5SB

A 32 3532 32 35 35 35B 52 5452 52 52 52 54C

Axle Length32 39

116 12833.5

117.535

11935

12237.5

124.537.5

126.5

A

Bracket Width

38.5

68

41

68

43.5

68

46

68

B 76 81 86 91C 20.5 23 25.5 28D

Axle Length19.5108

22113

24.5118

27123

BOTTOM BRACKET

THREADAXLEFINISH

BC1.37” x 24T.Boron steel.Phosphated cups, anodized sheath.

VP-BC63 340g

SEALED BEARING WITH ALUMINUM SHEATH/ COLD-FORGED STEEL CUPS.

GRIP44 COMFORT / GRIP 45

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

GRIPS

MATERIALCLAMPSIZE

PP / TPRAluminumID 22.2mm x OD 30mm x L 130 / R 90mm

VPG-ER05A

MATERIALCLAMPSIZE

PP / TPRAluminumID 22.2mm x OD 30mm x L 130 / 130mm

VPG-ER06A

A triangular shaped silicone outer grip to

better fit the shape of a closed fist.

COMFORT

MTB & BMX / GRIP46 SIMO / GRIP 47

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

MATERIALCLAMPSIZE

PP / TPRPPID 22.2mm x OD 32.6mm x L 130mm

VPG-103

MATERIALCLAMPSIZE

PC / SiliconeAluminumID 22mm x OD 30mm x L 140mm

VPG-BS11

MATERIALCLAMPSIZE

PP / TPRAluminumID 22.2mm x OD 29.2mm x L 136mm

VPG-115A

MATERIALCLAMPSIZE

PP / TPRAluminumID 22.2mm x OD 30mm x L 136mm

VPG-125A

MATERIALCLAMPSIZE


VPG-122A

MATERIALCLAMPSIZE


VPG-301A

MATERIALSIZE

100% SiliconeID 22.2mm x OD 33mm x L 128.7mm

VPG-BS06 / VPG-BS06P DOUBLE HOLE

MATERIALSIZE

100% SiliconeID 22.2mm x OD 33mm x L105mm

VPG-BS06P 105LDOUBLE HOLE

SIMO Brings a true high-end feel to the bike

and meets european bio-safety standards.

Non-toxic, hypoallergenicUV stable-never fades or gets sticky

Superior tactile experienceHigher friction than TPR

Exact Pantone matching possible

MTB

BMX

TAPE48 TAPE 49

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

TAPEMATERIALSIZECOLOR

PU / EVA Foamed L 210cm x 30mm x 3.0mmYellow, Orange

VPT-3306H1

MATERIALSIZECOLOR

EVA Foamed with Gel designL 210cm x 30mm x 2.5mmBlack, White, Red, Blue

VPT-1300G

MATERIALSIZECOLOR

PU / EVA FoamedL 210cm x 30mm x 3.0mmBlack, White

VPT-3302H1

MATERIALSIZECOLOR

PU / EVA Foamed L 210cm x 30mm x 3.0mmBlack, White

VPT-3307

MATERIALSIZECOLOR

PU / EVA Foamed L 210cm x 30mm x 2.5mmBlack

VPT-3309

MATERIALSIZECOLOR

100% SiliconeL 180cm x 30mm x 2.2mmBlack, White

VPT-2305

MATERIALSIZECOLOR

EVA Foamed with GelL 210cm x 30mm x 2.5mmBlack

VPT-1110G

TAPE50 51

Exciting products need packaging that show cases their excellence and makes the

value and style obvious to the consumer. Our new range of VP packaging does that

job effectively with bold red and white graphics and clever design to display the

contents and brings the consumer closer to the product.

VPT-5305 RAINBOW

VPT-5305 SILVER

MATERIALSIZEOPTIONCOLOR

PU / EVA FoamedL 210cm x 30mm x 2.5mmVPT-5305 SILVERBlack, White

VPT-5305

BOOST / HUB52 MTB / HUB 53

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UBBODY

AXLESPOKE HOLESP.C.DFLANGE TO FLANGEO.L.D

AluminiumAL707532H 36H58mm70mm110

MD-JA176F-X15 212g

BODYAXLESPOKE HOLESP.C.DFLANGE TO FLANGEO.L.D

AluminiumAL707532H 36H 45mm62mm100

CLK-170F-X12 153g


AluminiumCr-Mo28H 32H 36H58mm61mm141 / 148

MD-JA276R-X12 318g


AluminiumCr-Mo32H 36H 49mm57mm135 / 142

CLK-270R-X12 293g



CLK-176F-X15 147g



MD-JA173F-X12 206g


AluminiumCr-Mo32H 36H45mm63mm148

CLK-252R-X12 348g


AluminiumCr-Mo32H 36H58mm57mm135 / 142

MD-JA273R-X12 337g


AluminiumCr-Mo28H 32H 36H49mm61mm148

CLK-276R-X12 289g

BODYAXLEP.C.DFLANGE TO FLANGEO.L.DID

AluminiumS45C58mm62mm1005

MD-ESS139F 258g

HUB WIDER IS STIFFERBOOST

MODUS TAKES YOU TO THE TOP MTB

MTB / HUB54 55

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UBBODY

AXLEP.C.DFLANGE TO FLANGEO.L.DID

AluminiumS45C58mm57mm1355

MD-ESS239R 470g



MD-JA159F-DSE-QR 330g



MD-JA259R-DSE-QR 546g

BODYAXLESPOKE HOLESP.C.DFLANGE TO FLANGEO.L.DOPTION

AluminiumS45C24H 28H 32H 36H38mm72mm100W/Quick Release JA183F-QR

MD-JA183F 205g


AluminiumS45C24H 28H 32H 36H 45mm57mm135W/Quick Release JA183R-QR

MD-JA183R 321g


SteelS45C24H 28H 32H 36H38mm69mm100W/Quick Release JA131F-QR Flange to Flange 64mm JS132F Flange to Flange 59mm JS133F

MD-JS131F 230g


SteelS45C24H 28H 32H 36H45mm57mm135W/Quick Release JA131R-QRSingle speed (Double teeth) JS132R

MD-JS131R 362g


SteelS45C24H 28H 32H 36H38mm69mm100W/Quick Release JS135F-QR

MD-JS135F 242g


SteelS45C24H 28H 32H 36H45mm57mm135W/Quick Release JS135R-QR

MD-JS135R 368g

MTB / HUB

SINGLE SPEED / HUB56 ROAD / HUB 57

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UBBODY

AXLESPOKE HOLESP.C.DFLANGE TO FLANGEO.L.DOPTION

AluminiumCr-Mo20H 24H 28H 32H38mm48mm74Loose ball JA501F-DSE-QR

MD-JA501F-SBT-QR 130g


AluminiumAL707540mm45 / 54mm10012

SPC-771F-X12 132g


AluminiumAL707532H 36H58 / 45mm62mm100

MD-JA763F-X12 140g

BODYAXLESPOKE HOLESP.C.DFLANGE TO FLANGETEETHO.L.D

AluminiumS45C, 3/824H 28H 36H45mm55mm11T, 14T, 16T114

MD-JA560R 375g


AluminiumCr-Mo47mm45.5 / 54.5mm14212

SPC-771R-X12 348g


AluminiumCr-Mo32H 36H58 / 49mm59mm142

MD-JA763R-X12 314g

ONE GEARSINGLE SPEED

ADVENTURE AND PERFOMANCEROAD

362g

ROAD & BMX / HUB58 CITY / HUB 59

PED

ALS

HEA

DSE

TSBB

GRI

PTA

PEH

UB

BODYAXLEP.C.DO.L.DID

AluminiumS45C38mm1005

MD-ESS739F 168g


AluminiumS45C, 3/816H 20H 24H 28H 32H 36H42mm65mm100

MD-JS532F 280g


AluminiumCr-Mo, M1428H 32H 36H45mm72.6mm100

MD-JA386F-SBT 256g


SteelS45C, 3/816H 20H 24H 28H 32H 36H45mm57.5mm130Flange to Flange 55.5mm JS532R Single Speed / Flange to Flange 57.5mm JS534R

MD-JS530R 429g

BODYAXLEP.C.DO.L.DID

AluminiumS45C45mm1305

MD-ESS739R 386g


SteelS45C, 3/8, 5/1616H 20H 24H 28H 32H 36H35mm50mm74Flange to Flange 60.5mm JS521F Flange to Flange 65.5mm JS522FFlange to Flange 70.5mm JS523FFlange to Flange 74.5mm JS524F

MD-JS520F 183g

BODYAXLESPOKE HOLESP.C.DFLANGE TO FLANGEO.L.DSPROCKET OPTION

AluminiumCr-Mo, M1428H 32H 36H49mm57mm1109T, 11T

MD-JA351R-SBT 500g


SteelS45C, 5/1620H 24H 28H 36H35 mm74.5 mm93Flange to Flange 68.5 mm NS523F

MD-NS521F 192g

ADVENTURE AND PERFOMANCEROAD

FLOW, STYLE & HUCKSBMX

SIMPLE AND EASYCITY

CITY / HUB60


SteelS45C, 3/820H 24H 28H 36H45 mm53 mm14T, 16T, 18T114

MD-NS518R 541g


SteelS45C, 3/820H 24H 28H 36H45mm57mm124.5

MD-NS527R 394g


SteelS45C, 3/820H 24H 28H 36H45 mm57mm14T, 16T, 18T112

MD-NS526R 522g


SteelS45C, 3/820H 24H 28H 36H45mm53mm14T, 16T, 18T114

MD-NS538R 522g

HU

BTA

PEG

RIP

BBH

EAD

SETS

PED

ALS

61QUICK RELEASE & CASSETTE BODY / HUB

QUICK RELEASE & CASSETTE BODY

83gFH-4-A9MATERIAL

OPTION

7075 Shimano 8/9/10S CompatibleSRAM 11S CompatibleShimano 11S Compatible

150gFH-4-S9MATERIAL

OPTION

SCM415Shimano 8/9/10S CompatibleSRAM 11S CompatibleShimano 11S Compatible

142gFH-5-S9MATERIAL SCM415

183gFH-1-S9MATERIAL SCM415

65/72g43/47gQA03FRONT/REARSIZEAXLE

QR Steel nut w/plastic Cover109 / 112 / 148 / 152 mmCr-Mo

64/78gQA02FRONT/REARSIZEAXLE

QR Steel nut w/plastic Cover109 / 112 / 148 / 152 mmCr-Mo

60/66g50/56g 42/46gQA04FRONT/REARSIZEAXLE

QR Steel nut w/alloy Cover109 / 112 / 148 / 152 mm Cr-Mo

81gQA12-SRREARAXLE

QR AlloyAlloy SRAM System Compatible

88gQA12-SHREARAXLE

QR AlloyAlloy Shimano System Compatible

CONTENTSCONTENTS SOLUTION PROVIDER GRIP TAPE HUB PEDALS HEADSETS BB EPB System Performance Dual Fuction Trekking / Urban / City Road MTB Freeride / Downhill / BMX Junior Folding Exercise

Documents