-
Marine Cables
GERMANYPrysmian Kabel und Systeme GmbH Austrasse 99D-96465
Neustadt bei Coburg, GermanyTel. +49 9568 93 2697Fax +49 9568 93
2527
ITALYPrysmian Cavi e Sistemi Energia SrlVia Sarca 222, 20126
Milan, ItalyTel. +39 02 64491Fax +39 02 6449 2931
NORWAYDraka Norsk Kabel ASP.O. BOX 369, N-3001 DrammenTel. +47
64 915 713Fax +47 64 915 714
HEAD OFFICEPrysmian Cables and Systems - Viale Sarca 222, 20126
Milano, Italy - tel. +39 02 6449 1, fax +39 02 6449 2931 -
www.prysmian.com
STU
RMA
N O
Y / H
AN
NU
N TA
SAPA
INO
OY
/ 09-
2011
/ 1.
000
MARINE CABLES FINLANDPrysmian Cables & Systems OyKaapelitie
68, PikkalaP.O. BOX 13, FI-02401 Kirkkonummi Finland Tel. +358 10
77551Fax +358 9 298 2204
www.prysmian.fi
RUSSIAAlexey Glushkov Representative for marine and offshore
projects in Russia and the CIS countries V.O., line 22, building 3
199106, St. Petersburg T: +7 (812) 932 20 72F: +7 (812) 640 01 91M:
+7 960 287 33 69
Prysmian Russia 125167, Russia, Moscow, 4th Str. Vosmogo Marta,
6a, build.1 Tel: +7(495) 933 70 36 Fax: +7(495) 933 70 35
Prysmian Russia125167, Россия, Москва, 4-я улица Восьмого Марта,
6А, строение 1 Тел: +7(495) 933 70 36 Факс: +7(495) 933 70 35
-
Marine CablesAbout us
2
Marine Cables
The Prysmian Group is a world-class multinational company.
Originally founded in 1872 as Ditta Pirelli & C., it has during
over a century achieved the leading position in the international
cable market, both Energy and Telecom.
After the merger of Prysmian with Draka in 2011, the Prysmian
group is the biggest cable maker in the world with 98 manufacturing
facilities in 50 countries and a combined personnel of about
22000.
Prysmian Energy Cables and Systems is a global solutions
provider, offering a wide range of integrated solutions, such as
cable systems, system design and engineering, project management,
installation and post-sale services.
Prysmian concentrates on continuous product innovation and on
achieving a competitive edge by focusing on research and
development. This is done through Prysmian’s own R&D centres
and by co-operating with universities, scientific institutions and
above all, our customers. Prysmian’s world-wide organisation makes
and delivers advanced technological solutions to customers anywhere
in the world.
Prysmian in Finland
Prysmian Cables and Systems Oy has roots going back to 1912,
when The Finnish Braiding Factory, the first cable factory in
Finland, was founded in Helsinki. The company has since had many
names, The Finnish Cable Factory, Nokia Cables, NK Cables and
Pirelli Cables and Systems Oy. Since October 2005 it is Prysmian
Cables and Systems Oy.
In Finland there are two production facilities, the Pikkala
cable factory and the Oulu cable factory. The Pikkala factory is
situated in Kirkkonummi, about 40 km west of Helsinki along the
coast. Production consists of marine cables, heating cables and
low, medium and high voltage cables as well as submarine cables.
The main customer groups are shipyards, installers, wholesalers,
contractors, industry and power utilities.
The Oulu factory is situated in the city of Oulu, about 800 km
north of Helsinki by the northern end of the Gulf of Bothnia. The
main products there are various telecom cables and house wiring
cables.
Satu Karmavalo +358 10 77 55 828 satu.karmavalo@
prysmian.com
Olli Anttonen +358 10 77 55 603 olli.anttonen@ prysmian.com
Fax: +358 9 298 2204
Jorma Ikäheimonen +358 10 77 55 496 jorma.ikaheimonen@
prysmian.com
Katrine Dawson +358 10 77 55 606 katrine.dawson@
prysmian.com
Martin Pekuri +358 10 77 55 605 martin.pekuri@ prysmian.com
Vesa Riitaoja +358 10 77 55 472 vesa.riitaoja@ prysmian.com
Seija Kurtén +358 10 77 55 604 seija.kurten@ prysmian.com
Timo Pölkki +358 10 77 55 876 timo.polkki@ prysmian.com
Susanne Welander +358 10 77 55 618 susanne.welander@
prysmian.com
Alexey Glushkov +796 02 873 369 [email protected]
-
Marine CablesMarine Cables
3
CONTENTS
ApprovalsAll above mentioned test are part of the IEC test
procedures for marine cables. As a confirmation of the successfully
passed test our products have type approval certificates from the
following classification societies:
ABS American Bureau of Shipping BV Bureau VéritasDNV Det Norske
Veritas GL Germanischer LloydLR Lloyd’s RegisterRINA Registro
Italiano Navale RMRS Russian Marine Register of Shipping
General 4
> POWER & CONTROL CABLES
LM-HF 0,6/1 (1,2) kVUnarmoured Power and Control Cable 6
LSM-HF 0,6/1 (1,2) kVArmoured Power and Control Cable 8
LSM-HF 1,8/3 (3,6) kVArmoured Power Cable 10
> INSTRUMENTATION CABLES
LJST-HF 150/250 (300) V Armoured Instrumentation and
Telecommunication Cable 12
LJT-HF 150/250 (300) V Screened Instrumentation and
Telecommunication Cable 14
HFX-ISOSA/Cu 250 VIndividually Screened Instrumentation and
Telecommunication Cable 16
SIENOPYR-FR PROFIBUS M-02Y(ST)CHX 100 V Bus-Cable 18
> FIRE RESISTANT CABLES
LM-FRHF 0,6/1 (1,2) kV Unarmoured Fire Resistant Power and
Control Cable 20
LSM-FRHF 0,6/1 (1,2) kVArmoured Fire Resistant Power and Control
Cable 22
SIENOPYR-FR FMHXCH FE 120 150/250 (300) VArmoured Fire Resistant
Instrumentation,Communication and Control Cable 24
> MEDIUM VOLTAGE CABLES
MV-FHFX/A 6/10 (12) kVArmoured Medium Voltage Power Cable 26
MV-FHFX/A 12/20 (24) kVArmoured Medium Voltage Power Cable 28
> TECHNICAL INFORMATION
Installation 30Current rating 32Identification colours
33Electrical data 34
-
4
Marine Cables
4
Marine CablesGENERAL
Marine Cables(ship wiring cables, ship board cables)
Marine cables are for installations on board ships. They have
been type approved by a classification society and they have a
construction that follows standards for marine cables.
ConductorMarine cable conductors are of stranded annealed copper
combining the flexibility and small dimensions to provide excellent
installability and economical solutions. To minimise the cable
diameter and weight we use sector shaped conductors for bigger
cross-section.
Insulation MaterialXLPE (cross-linked polyethylene) is used as
the main insulation material. It withstands higher temperatures
than ordinary thermoplastic polyethylene. It is resistant against
deformation and various chemicals. It has excellent mechanical and
electrical properties. The maximum conductor temperature stipulated
by IEC 60092-351 marine cable standard is 90 ˚C.
Sheathing MaterialThe sheath (jacket) is composed of halogen
free, flame retardant thermoplastic compound. It fulfils the
criterion of SHF1 according to IEC 60092-359. In case of fire the
sheathing material offers advantages such as reduced emission of
smoke and corrosive toxic gasses.
Quality ControlEach manufactured cable goes through a test
procedure according to the IEC 60092-300 series standards.
Fire Testing MethodsFlame retardance of a single cable is tested
in accordance with IEC 60332-1-2. It is performed on a 60 cm cable
sample with a gas flame for 1-8 min depending on the cable
diameter. The cable has to be self-extinguishing within certain
limits to fulfil the test. Please see figure 1.
Flame spread is tested on bunched cables in accordance with IEC
60332-3-22, simulating the fire behaviour of the cables installed
in a bunch. The main category that is used is A.
This is based on an amount of 7 litres of combustible material
per metre. The bunch of cables has to be minimum 3.5 m high when it
is in a test chamber subjected to fire from a burner directed at
the cables for forty minutes. The cable bunch may not burn more
than 2.5 m above the burner.Please see figure 2.
Fire resistance tests are aimed at verifying the behaviour of a
cable´s circuit integrity under fire conditions. The main three
different test methods are IEC 60331-21 or IEC 60331-1 or IEC
60331-2, used for power and control cables. Marine cable standards
require the IEC 60331-21 test, where the cable sample is subjected
to a flame at 750 ˚C for 90 minutes followed by a 15 minutes
cooling period while the rated voltage is being applied between the
conductors. No breakdown or short circuit is permitted during the
test. Please see figure 3. The optional test methods for cables
with diameters over 20 mm, is the more rigorous IEC 60331-1 test,
or for diameter not exceeding 20 mm IEC 60331-2, in which a bent
cable, affected by mechanical shock, is subjected to a 830 ˚C flame
for minimum 90 minutes.
Smoke density is tested according to IEC 61034-1 (apparatus) and
IEC 61034-2 (procedure and requirements). It is done by placing
cable in a ”smoke cube” (3x3x3 m). When the cable is burning, the
light transmittance is measured using a photometric system. This
test is aimed at simulating visibility when cables are burning on
board a ship 60 % (70 % for a single cable) visibility is
satisfactory if it is attained throughout the test.
Halogens. To test whether a material is halogen free or not, the
tests IEC 60754-1 and 60754-2 are used. The acidity of the gasses
from burning materials is measured. Being halogen-free means that
the materials used in the cables do not contain any halogens – such
as chlorine, bromine, iodine and fluorine. In order to attain the
self-extinguishing effects that halogens have in cables, ATH
(aluminium trihydroxide) based materials are used instead. This way
the negative effects of halogens are avoided (corrosivity, toxicity
etc.)
Bunched cables being tested for
flame spread.
Test methods (IEC 60331-1 and -2) for fire with shock at a
temperature of at least 830 °C
-
Marine CablesMarine Cables
5
Vertical flame spread of bunched cables
IEC 60332-3-22 cat.A
4000 ± 100
1000 ± 100
2000 ± 100
Air Inlet(800 ± 20) x (400 ± 10)
Smoke Outlet(300 ± 30) x (1000 ± 100)
Rig raised above ground level
Floor
Round Steel Rungs
Metal Wire Ties
Centre Line of Burner
400 ± 5600 ± 5
Maximum Width
150
TouchingConfiguration
500 ± 5
Fire resistance test
IEC 60331-21
Temperature 750 °CFlow Rates (1 bar, 20 °C):Air 80 ± 5 Propane 5
± 0,25
Clamp Cable Sample
Support Arm
45
70 ± 10
Vertical flame propagation test
IEC 60332-1-2
50
1200 ± 25
600 ± 25550 ± 25475
1 kW burner, 45º angle flame/sample
50
Cable sample300 ± 25
540 Max. length of downwardlimit of charred surface
Support arm and copperwire wrapping
Figure 1.
Figure 2.
Figure 3.
-
Marine CablesPower and Control Cables
6
Marine Cables
Unarmoured Power and Control Cable
LM-HF0,6/1(1,2) kV
(TEMA)
> Construction IEC 60092-353 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Flame Retardance IEC 60332-3-22 (cat A) and
IEC 60332-1-2> Halogen Free Properties IEC 60754-1 and -2>
Low Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-353>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Annealed stranded plain copper - round 1,5 to 16
mm2
- round compacted 25 to 240 mm2
- sector shaped in 3-4 cores 35 to 240 mm2
> Insulation Extruded XLPE - See page 33 for core
identification colours> Sheath Extruded black halogen free
polyolefine, SHF1> Installation information and electrical data
on pages 30-35
Design
Standards
-
Marine Cables
7
Marine Cables
Conductor Cable BendingSize Diameter/Height Width Diameter
Weight Radius
approx. approx. approx. approx. min.(n x mm2) or (n G mm2) (mm)
(mm) (mm) (kg/km) (mm)
POWER CABLES1x16 5,0 9,0 200 701x25 5,8 – 10,5 290 851x35 6,9 –
11,5 385 901x50 8,0 – 13,0 510 1001x70 9,7 – 15,0 720 1201x95 11,3
– 16,5 970 1301x120 12,7 – 18,5 1210 1501x150 14,1 – 20,5 1490
1601x185 15,7 – 23,0 1840 1801x240 18,1 – 25,5 2390 2001x300 20,2
29,0 3100 2302x1,5 1,6 – 8,5 80 352x2,5 2,0 – 9,5 105 403x1,5 3G1,5
1,6 – 9,0 100 403x2,5 3G2,5 2,0 – 10,5 140 453x4 3G4 2,6 – 11,5 200
453x6 3G6 3,1 – 12,5 260 503x10 4,0 – 14,5 420 603x16 5,0 – 17,5
620 703x25 5,8 – 20,0 940 803x35 5,6 9,2 20,5 1170 1603x50 6,5 10,7
23,0 1550 1853x70 7,9 12,8 27,0 2200 2153x95 9,3 15,1 31,0 2950
2503x120 10,5 17,0 34,0 3700 2703x150 11,6 18,9 38,0 4600 3004x1,5
4G1,5 1,6 – 10,0 130 404x2,5 4G2,5 2,0 – 11,0 175 454x4 4G4 2,6 –
13,0 260 554x6 4G6 3,1 – 14,0 340 554x10 4G10 4,0 – 16,5 550 654x16
4G16 5,0 – 19,0 800 754x25 4G25 5,8 – 22,5 1200 904x35 4G35 6,2 8,6
23,0 1550 1854x50 4G50 7,2 9,9 26,5 2050 2104x70 4G70 8,6 12,0 31,0
2900 2504x95 4G95 10,2 14,1 35,0 3900 2804x120 4G120 11,5 15,8 39,0
4900 3105x1,5 5G1,5 1,6 – 11,0 155 455x2,5 5G2,5 2,0 – 12,5 215 50–
5G6 3,1 – 15,5 430 65– 5G10 4,0 – 18,0 660 75– 5G16 5,0 – 21,0 1000
85– 5G25 5,8 – 25,0 1500 100
CONTROL CABLES 7x1,5 1,6 – 13,0 220 5512x1,5 1,6 – 16,0 325
6519x1,5 1,6 – 19,0 480 7527x1,5 1,6 – 22,5 670 90 7x2,5 2,0 – 14,5
305 6012x2,5 2,0 – 18,0 460 7519x2,5 2,0 – 21,0 690 85
CLASS 5 CONDUCTOR1x50 9,9 – 15,0 550 901x70 11,0 – 17,0 770
1001x95 13,5 – 19,0 1000 1151x120 15,2 – 21,0 1250 1251x150 17,2 –
24,0 1550 1451x185 18,9 – 26,0 1880 1551x240 21,8 – 30,0 2450
180
-
Marine CablesPower and Control Cables
8
Marine Cables
Armoured Power and Control Cable
LSM-HF0,6/1(1,2) kV
(TEMA-A)
> Construction IEC 60092-353 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Flame Retardance IEC 60332-3-22 (cat A) and
IEC 60332-1-2> Halogen Free Properties IEC 60754-1 and -2>
Low Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-353>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Annealed stranded plain copper - round 1,5 to 16
mm2
- round compacted 25 to 240 mm2
- sector shaped in 3-4 cores 35 to 240 mm2
> Insulation Extruded XLPE - See page 33 for core
identification colours> Armour Braid of copper wires designed to
act as collective screen> Sheath Extruded black halogen free
polyolefine, SHF1> Installation information and electrical data
on pages 30-35
Design
Standards
-
Marine Cables
9
Marine Cables
Conductor Diameter Cable BendingSize Diameter/Height Width over
Braid Diameter Weight Radius
approx. approx. approx. approx. approx. min.(n x mm2) or (n G
mm2) (mm) (mm) (mm) (mm) (kg/km) (mm)
POWER CABLES1x16 5,0 – 8,5 11,0 270 901x25 5,8 – 9,5 12,5 365
1001x35 6,8 – 10,5 13,5 470 1101x50 7,9 – 12,0 15,0 620 1201x70 9,6
– 14,0 17,5 850 1401x95 11,3 – 16,0 19,0 1130 1501x120 12,7 – 17,5
21,0 1400 1701x150 14,1 – 19,5 23,0 1700 1801x185 15,7 – 21,5 25,0
2070 2001x240 18,1 – 24,0 28,0 2650 2202x1,5 1,6 – 7,5 10,0 130
602x2,5 2,0 – 8,5 11,0 160 653x1,5 3G1,5 1,6 – 8,0 10,5 155 653x2,5
3G2,5 2,0 – 9,0 11,5 195 703x4 2,6 – 10,0 13,0 270 803x6 3,1 – 11,0
14,0 320 853x10 4,0 – 13,5 16,5 520 1003x16 5,0 – 16,0 19,0 740
1153x25 5,8 – 18,5 22,0 1050 1353x35 5,6 9,2 19,0 23,0 1350 1853x50
6,5 10,7 21,5 25,5 1750 2053x70 7,9 12,8 25,0 29,0 2400 2303x95 9,3
15,1 28,0 33,0 3200 2603x120 10,5 17,0 31,5 36,5 4100 2903x150 11,6
18,9 35,0 41,0 5000 3304x1,5 4G1,5 1,6 – 8,5 11,0 180 704x2,5 4G2,5
2,0 – 10,0 12,5 250 804x4 4G4 2,6 – 11,5 14,0 320 854x6 4G6 3,1 –
13,0 16,0 450 954x10 4G10 4,0 – 15,5 18,5 670 1154x16 4G16 5,0 –
17,5 21,0 940 1304x25 4G25 5,8 – 20,5 24,0 1350 1454x35 4G35 6,2
8,6 21,5 25,5 1750 2004x50 4G50 7,2 9,9 24,5 29,0 2300 2304x70 4G70
8,6 12,0 28,0 33,0 3200 2654x95 4G95 10,2 14,1 32,0 37,0 4300
3004x120 4G120 11,5 15,8 36,0 41,0 5300 3305x1,5 5G1,5 1,6 – 9,5
12,0 220 755x2,5 5G2,5 2,0 – 11,0 13,5 290 85
CONTROL CABLES 7x1,5 1,6 – 11,5 14,5 300 10512x1,5 1,6 – 14,5
17,5 470 11019x1,5 1,6 – 17,0 20,5 650 12527x1,5 1,6 – 21,0 24,5
870 145 7x2,5 2,0 – 13,5 16,5 430 10012x2,5 2,0 – 16,5 20,0 620
12019x2,5 2,0 – 19,5 23,0 900 140
CLASS 5 CONDUCTOR1x50 9,9 – 15,0 17,5 700 1051x70 11,0 – 17,0
19,0 920 1151x95 13,5 – 19,0 21,0 1170 1251x120 15,2 – 21,0 23,5
1450 1401x150 17,2 – 24,0 26,0 1550 1551x185 18,9 – 26,0 28,5 1770
1701x240 21,8 – 30,0 32,0 2700 190
-
Marine CablesPower Cables
10
Marine Cables
Armoured Power Cable
LSM-HF1,8/3(3,6) kV
(TEMA-A)
> Construction IEC 60092-353 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Flame Retardance IEC 60332-3-22 (cat A) and
IEC 60332-1-2> Halogen Free Properties IEC 60754-1 and -2>
Low Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-353>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Annealed stranded plain copper - round compacted
25 to 240 mm2
> Insulation Extruded XLPE - See page 33 for core
identification colours - Plastic coated copper tape under the braid
in 3-core cables> Armour Braid of copper wires> Inner
covering Extruded halogen free polyolefine in 3-core cables>
Sheath Extruded black halogen free polyolefine, SHF1
Design
Standards
-
Marine Cables
11
Marine Cables
Conductor Diameter Cable BendingSize Diameter over Braid
Diameter Weight Radius
approx. approx. approx. approx. min.(n x mm2) (mm) (mm) (mm)
(kg/km) (mm)
LSM-HF 3 kV1x185 15,7 23 27 2100 3301x240 18,1 25 29 2700
350
LSM-HF 3 kV EMC3x 95/35 11,3 38 44 4700 4003x120/40 12,7 42 48
5700 4303x150/40 14,1 46 52 6700 4703x 95+3G16 11,3 36 42 4200
3803x120+3G25 12,7 39 45 5200 410
-
Marine CablesInstrumentation Cables
12
Marine Cables
Armoured Instrumentation and Telecommunication Cable
LJST-HF150/250 (300) V
(TEMA-TA)
> Conductor Stranded annealed plain copper conductor>
Insulation Extruded XLPE > Pair White and blue cores are twisted
to pair (see page 33)> Armour (common screen) Combined
electrical and mechanical protection Braid of copper wires - Drain
conductor > Sheath Extruded grey halogen free polyolefine,
SHF1
> Construction IEC 60092-376 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Flame Retardance IEC 60332-3-22 (cat A) and
IEC 60332-1-2> Halogen Free Properties IEC 60754-1 and -2>
Low Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-376>
Maximum conductor temperature +90 °C
Design
Standards
-
Marine CablesMarine Cables
13
n x 2 x mm2
Conductor resistance at
20 ˚C max W/km
Insulation resistance
min MW x km
n x 2 x 0,5 40,4 1030
n x 2 x 0,75 26,0 1020
Variable Value
Mutual capacitance single pair 60 nF/km
multi pair 50 nF/km
Loop inductance 0,7 mH/km
SizeConductor Screen Cable BendingDiameter Diameter Diameter
Weight Radiusapprox. approx. approx. approx. min.
(n x 2 x mm2) (mm) (mm) (mm) (kg/km) (mm)
1x2x0,5 0,9 5,5 7,5 80 45 2x2x0,5 (quad) 0,9 6,5 8,5 105 55
4x2x0,5 0,9 10,0 12,0 190 75 7x2x0,5 0,9 11,5 14,0 250 85 8x2x0,5
0,9 12,5 15,0 270 9010x2x0,5 0,9 14,0 17,0 350 10514x2x0,5 0,9 16,0
19,0 450 11519x2x0,5 0,9 18,0 21,5 570 13024x2x0,5 0,9 20,0 24,0
680 145 1x2x0,75 1,1 5,7 8,0 90 50 2x2x0,75 (quad) 1,1 6,7 9,0 125
55 4x2x0,75 1,1 10,5 13,5 230 85 7x2x0,75 1,1 12,5 15,0 300 95
8x2x0,75 1,1 13,5 16,5 350 7010x2x0,75 1,1 15,0 18,5 450
11514x2x0,75 1,1 17,5 21,0 570 13019x2x0,75 1,1 20,0 24,0 730
15024x2x0,75 1,1 23,0 27,0 890 165
(quad) construction used in two pair cables:
Electrical data (according to IEC 60092-376) Characteristic
properties (approximate values)
Troitsky Bridge Courtesy of Admiralty Shipyard
-
Marine CablesInstrumentation Cables
14
Marine Cables
Screened Instrumentation and Telecommunication Cable
LJT-HF150/250 (300) V
(TEMA-TO)
> Construction IEC 60092-376> Materials IEC 60228 Class 2
(conductor) IEC 60092-351 (insulation) IEC 60092-359 (sheath)>
Flame Retardance IEC 60332-3-22 (cat A) and IEC 60332-1-2>
Halogen Free Properties IEC 60754-1 and -2> Low Smoke Emission
IEC 61034-1 and -2> Tests IEC 60092-376> Maximum conductor
temperature +90 °C
> Conductor Stranded annealed plain copper conductor>
Insulation Extruded XLPE - See page 33 for core identification
colours and numbers> Pair White and blue cores are twisted to
pair (see page 33)> Common screen Plastic coated aluminium tape
- Tinned copper drain wire - Coverage 100 %> Sheath Extruded
grey halogen free polyolefine, SHF1
Design
Standards
-
Marine CablesMarine Cables
15
SizeConductor Cable BendingDiameter Diameter Weight
Radiusapprox. approx. approx. min.
(n x 2 x mm2) (mm) (mm) (kg/km) (mm)
1x2x0,5 0,9 6,6 45 55 2x2x0,5 (quad) 0,9 7,5 65 60 4x2x0,5 0,9
11,5 120 90 7x2x0,5 0,9 13,5 180 110 8x2x0,5 0,9 14,5 200
12010x2x0,5 0,9 15,5 240 12514x2x0,5 0,9 17,5 330 14519x2x0,5 0,9
20,0 400 17024x2x0,5 0,9 22,0 500 185 1x2x0,75 1,1 7,5 55 60
2x2x0,75 (quad) 1,1 8,5 85 70 4x2x0,75 1,1 12,5 155 100 7x2x0,75
1,1 14,5 230 120 8x2x0,75 1,1 15,5 270 12510x2x0,75 1,1 17,0 320
14014x2x0,75 1,1 19,5 420 16019x2x0,75 1,1 22,0 560 18024x2x0,75
1,1 24,5 690 200
n x 2 x mm2
Conductor resistance at
20 ˚C max W/km
Insulation resistance
min MW x km
n x 2 x 0,5 40,4 1030n x 2 x 0,75 26,0 1020
Variable Value
Mutual capacitance single pair 60 nF/kmmulti pair 0,5 45
nF/kmmulti pair 0,75 50 nF/km
Loop inductance 0,7 mH/km
(quad) construction used in two pair cables:
Electrical data (according to IEC 60092-375) Characteristic
properties (approximate values)
-
Marine CablesInstrumentation Cables
16
Marine Cables
Individually Screened Instrumentation and Telecommunication
Cable
HFX-ISOSA/Cu250 V
(TEMA-TIOA)
> Construction IEC 60092-375, -376 and 92-3> Materials IEC
60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC 60092-359
(sheath)> Flame Retardance IEC 60332-3-22 (cat A) and IEC
60332-1-2> Halogen Free Properties IEC 60754-1 and -2> Low
Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-375, -376>
Maximum conductor temperature +90 °C
> Conductor Stranded annealed plain copper conductor>
Insulation Extruded XLPE - Number identification> Pair Black and
blue cores are twisted to pair> Sreen Individual and collective
screen of plastic laminated aluminium tape - tinned copper drain
wires> Armour Braid of plain copper wires> Sheath Extruded
orange halogen free polyolefine, SHF1
Design
Standards
-
Marine CablesMarine Cables
17
SizeConductor Cable Bending
Resistance Diameter Diameter Weight Radiusmax. approx. max.
approx. min.
(n x 2 x mm2) (W/km) (mm) (mm) (kg/km) (mm)
250 V 2 x 2 x 0,75 26,0 1,1 13,6 170 109 4 x 2 x 0,75 26,0 1,1
17,0 300 136 7 x 2 x 0,75 26,0 1,1 20,1 420 16110 x 2 x 0,75 26,0
1,1 24,9 630 19914 x 2 x 0,75 26,0 1,1 27,1 760 21719 x 2 x 0,75
26,0 1,1 30,1 1000 24124 x 2 x 0,75 26,0 1,1 34,1 1190 273
-
Marine CablesInstrumentation Cables
18
Marine Cables
Bus-CableSIENOPYR-FR PROFIBUS
M-02Y(ST)CHX100V
(TEMA- PROFIBUS)
> Ozone DIN VDE 0472 Part 805, Test B> Fire retardance IEC
60332-3-24 (cat C)> Corrosivity of combustion gasses IEC
60754-2> Smoke density IEC 61034> Resistance to chemicals
(Test to VG 95218 Part 2): - diesel fuel - oils - hydraulic fluids
- solvent cleaning agents - de-ionozed water - de-ionized water
with 3,5 % NaCl> Maximum conductor temperature +80 °C
> Conductor 7 bare copper wires, E-Cu58 F21 to DIN 40500 part
4 cross section: 0,35 mm2
(AWG 22 = 0,325 mm2)> Insulation Polyethylene foam (cellular
HDPE)> Core identification - a core: red - b core: green>
Laying Laying of the both copper cores with two blind cores>
Core assembly wrapping Nonwoven plastic textile band> Multi
layer screen 1. layer: laminated aluminium foil, 2. layer: tinned
copper wire braid> Inner Sheath according VDE 0207 part 24
Halogen free polymer (HM4) diameter: 8 mm (nominal)> Outer
Sheath according IEC 60092-359 Halogen free, cross-linked polymer
Colour: black
Design
Standards
-
Marine CablesMarine Cables
19
> Voltage 100 V> Conductor resisitance 1 km loop at 20 ˚C
max. 110 W/km> Characteristic impedance at 3 to 20 MHz 150 ± 15
W at 38,4 kHz 185 ± 18,5 W at 9,6 kHz 250 ± 25 W> Wave
attenuation at 16 MHz max. 45 dB/km at 4 MHz max. 22 dB/km at 38,4
kHz max. 5 dB/km at 9,6 kHz max. 3 dB/km> Mutual capacitance at
800 Hz max. 30 nF/km> Insulation resistance at 20 ˚C min. 16 000
MWkm> Outer sheath surface resistance min 109 W
> Ambient temperatures During operations as bus cable fixed
intallation –35 to 80 ˚C During installation –15 to 50 ˚C Conductor
temperature in operation max. 80 ˚C> Tensile load during
installation max. 100 N> Bending radius (D = overall diameter )
Single bending min 10 x D Flexing min 20 x D> Weight appr. 110
kg/1000 m> Outer diameter max 9,8 mm
Transmission characteristics
Other properties
Photos Martin Pekuri
-
Marine CablesFire Resistant Cables
20
Marine Cables
Unarmoured Fire Resistant Power and Control Cable
LM-FRHF0,6/1 (1,2) kV
(TEMA-FR)
> Construction IEC 60092-353 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Fire Resistance IEC 60331-1 or IEC
60331-2> Flame Retardance IEC 60332-3-22 (cat A) and IEC
60332-1-2> Halogen Free Properties IEC 60754-1 and -2> Low
Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-353>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Annealed stranded plain copper - round 1,5 to 16
mm2
- round compacted 25 to 240 mm2
- sector shaped in 3-4 cores 35 to 240 mm2
> Insulation Mica tape with overlap as fire resistant layer
Extruded HF90 - see page 33 for core identification colours>
Sheath Extruded orange halogen free polyolefine, SHF1>
Installation information and electrical data on pages 30-35
Design
Standards
-
Marine CablesMarine Cables
21
Conductor Cable BendingSize Diameter/Height Width Diameter
Weight Radius
approx. approx. approx. approx. min.(n x mm2) or (n G mm2) (mm)
(mm) (mm) (kg/km) (mm)
POWER CABLES2x1,5 1,6 – 10,0 90 402x2,5 2,0 – 11,0 120 453x1,5
3G1,5 1,6 – 10,5 110 453x2,5 3G2,5 2,0 – 12,0 150 503x6 3,1 – 14,5
280 603x10 4,0 – 16,5 450 653x16 5,0 – 18,5 650 753x25 5,8 – 22,5
970 1303x35 6,8 – 25,0 1230 1503x50 6,5 10,7 24,5 1600 1953x70 7,9
12,8 28,0 2200 2253x95 9,3 15,1 32,0 3000 2553x120 10,5 17,0 35,0
3750 2803x150 11,6 18,9 39,0 4600 3104x1,5 4G1,5 1,6 – 11,5 140
504x2,5 4G2,5 2,0 – 13,0 190 55
CONTROL CABLES 5x1,5 1,6 – 12,5 170 50 7x1,5 1,6 – 15,0 250
6012x1,5 1,6 – 18,0 370 7519x1,5 1,6 – 21,0 550 8527x1,5 1,6 – 26,0
770 160 5x2,5 2,0 - 14,0 240 55 7x2,5 2,0 – 16,0 330 6512x2,5 2,0 –
20,0 520 8019x2,5 2,0 – 24,0 770 150
Unarmoured Fire Resistant Power and Control Cable
Stril Mermaid Courtesy of Flekkefjord Elektro AS
-
Marine CablesFire Resistant Cables
22
Marine Cables
Armoured Fire Resistant Power and Control Cable
LSM-FRHF0,6/1 (1,2) kV
(TEMA-AFR)
> Construction IEC 60092-353 and IEC 60092-350 > Materials
IEC 60228 Class 2 (conductor) IEC 60092-351 (insulation) IEC
60092-359 (sheath)> Fire Resistance IEC 60331-1 or IEC
60331-2> Flame Retardance IEC 60332-3-22 (cat A) and IEC
60332-1-2> Halogen Free Properties IEC 60754-1 and -2> Low
Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-353>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Annealed stranded plain copper - round 1,5 to 16
mm2
- round compacted 25 to 240 mm2
- sector shaped in 3-4 cores 35 to 240 mm2
> Insulation Mica tape with overlap as fire resistant layer
Extruded HF90 - See page 33 for core identification colours>
Armour Braid of copper wires designed to act as collective
screen> Sheath Extruded orange halogen free polyolefine,
SHF1> Installation information and electrical data on pages
30-35
Design
Standards
-
Marine CablesMarine Cables
23
Conductor Diameter Cable BendingSize Diameter/Height Width over
Braid Diameter Weight Radius
approx. approx. approx. approx. approx. min.(n x mm2) or (n G
mm2) (mm) (mm) (mm) (mm) (kg/km) (mm)
POWER CABLES2x1,5 1,6 – 8,5 11,0 150 652x2,5 2,0 – 9,5 12,5 190
753x1,5 3G1,5 1,6 – 9,0 11,5 185 703x2,5 3G2,5 2,0 – 10,0 13,0 240
803x6 3,1 – 13,0 15,0 420 953x10 4,0 – 15,0 18,0 610 1103x16 5,0 –
17,5 20,5 820 1253x25 5,8 – 20,5 23,5 1150 1403x35 6,8 – 22,0 26,0
1500 1903x50 6,5 10,7 22,0 26,5 1900 2153x70 7,9 12,8 25,5 30,0
2600 2403x95 9,3 15,1 29,5 34,0 3500 2753x120 10,5 17,0 32,0 37,0
4300 3003x150 11,6 18,9 35,5 41,0 5200 3304x1,5 1,6 – 10,0 13,0 230
754x2,5 2,0 – 11,0 14,0 285 85
CONTROL CABLES 5x1,5 5G1,5 1,6 – 11,5 14,0 270 85 7x1,5 1,6 –
14,0 17,0 410 10512x1,5 1,6 – 17,0 20,0 570 12019x1,5 1,6 – 19,5
23,0 800 14027x1,5 1,6 – 24,0 28,0 1100 170 5x2,5 2,0 – 13,0 16,0
390 95 7x2,5 2,0 – 14,5 18,0 490 11012x2,5 2,0 – 19,0 22,0 740
13019x2,5 2,0 – 22,0 26,0 1050 160
Armoured Fire Resistant Power and Control Cable
Courtesy of the Royal Caribbean Cruise Line
Courtesy of the Royal Caribbean Cruise Line
-
Marine CablesFire Resistant Cables
24
Marine Cables
Armoured Fire Resistant Instrumentation, Communication and
Control Cable
SIENOPYR-FR FMHXCH FE 120
150/250 (300) V(TEMA-TAFRS)
> Construction IEC 60092 -376> Materials IEC 60228 Class 2
(conductor) IEC 60092-351 (insulation) IEC 60092-359 (sheath)>
Fire Resistance IEC 60331-21 or IEC 60331-31> Flame Retardance
IEC 60332-3-22 (cat A) and IEC 60332-1-2> Halogen Free
Properties IEC 60754-1 and -2> Low Smoke Emission IEC 61034-1
and -2> Tests IEC 60092-376> Maximum conductor temperature
+90 °C
> Conductor Stranded annealed plain copper conductor 0,75
mm2
> Insulation White ceramic HF S95> Pair Numbered white
cores are twisted to pair (2 pairs is a quad) > Armour (common
screen) Braid of copper wires > Sheath Extruded orange halogen
free polyolefine, SHF1
Design
Standards
-
Marine CablesMarine Cables
25
SizeConductor Cable BendingDiameter Diameter Weight
Radiusapprox. approx. approx. min.
(n x 2 x mm2) (mm) (mm) (kg/km) (mm)
1x2x0,75 1,1 8,0 95 55 2x2x0,75 (quad) 1,1 9,5 130 60 4x2x0,75
1,1 12,0 195 75 7x2x0,75 1,1 14,5 305 9010x2x0,75 1,1 17,5 430
11014x2x0,75 1,1 20,0 560 12519x2x0,75 1,1 22,0 720 14024x2x0,75
1,1 25,0 880 160
(quad) construction used in two pair cables:
Armoured Fire Resistant Instrumentation, Communication and
Control Cable
Electrical data (according to IEC 60092-375) Characteristic
properties (approximate values)
Variable Value
Mutual capacitance max. 120 nF/kmLoop inductance 0,7 mH/km
n x 2 x mm2
Conductor resistance at
20 ˚C max W/km
Insulation resistance
min MW x km
n x 2 x 0,75 26,0 480
Mariner of the Seas Courtesy of Aker Yards Oy
-
Marine CablesMedium Voltage Cables
26
Marine Cables
Armoured Medium Voltage Power Cable
MV-FHFX/A 6/10 (12) kV
(TEMA-A)
> Construction IEC 60092-354 and IEC 60092-350 > Materials
IEC 60228 (conductor) IEC 60092-351 (insulation) IEC 60092-359
(sheath)> Flame Retardance IEC 60332-3-22 (cat A) and IEC
60332-1-2> Halogen Free Properties IEC 60754-1 and -2> Low
Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-354>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Flexible copper conducter (class 5)> Conductor
screen Semiconductive tape and extruded compound> Insulation
Extruded off-white XLPE, nominal thickness 3,4 mm> Insulation
screen Extruded semiconductive compound> Metallic Screen Copper
tapes> Inner Covering Extruded halogen free compound> Armour
Braid of copper wires> Sheath Extruded red halogen free
compound, SHF1
Design
Standards
-
Marine CablesMarine Cables
27
Conductor Core Inner Cover Braid CableSize Diameter Diameter
Thickness Diameter Diameter Weight
approx. approx. approx. approx. approx. approx.(n x mm2) (mm)
(mm) (mm) (mm) (mm) (kg/km)
MV-FHFX/A (FE4H1M1AM1)1x150 15,6 25,0 1,2 29,0 33,0
2260MV-FHFX/A (FE4H10M1AM1)3x35 7,5 17,0 1,2 41,0 46,0 34603x50 8,7
18,5 1,2 44,5 50,0 40103x70 10,3 20,0 1,2 47,5 53,0 49303x95 12,1
21,5 1,2 51,0 57,0 60603x120 13,6 23,0 1,2 54,0 60,0 7050
Current Conductor Resistance Inductance CapacitanceSize rating
at +45 ˚C RDC L C
ambient 1) (W/km)
(n x mm2) (A) at +20 ˚C at +45 ˚C at +85 ˚C (mH/km) (mF/km)
MV-FHFX/A (FE4H1M1AM1)1x150 369 0,124 0,136 0,156 0,318
0,403MV-FHFX/A (FE4H10M1AM1)3x35 104 0,524 0,575 0,658 0,357
0,2373x50 130 0,387 0,425 0,486 0,341 0,2643x70 160 0,268 0,294
0,337 0,321 0,3003x95 194 0,193 0,212 0,242 0,307 0,3423x120 225
0,153 0,168 0,192 0,296 0,3771) IEC 60092-352 Table B.4 x 0,95 (see
also Tables A.1 - A.8)
Armoured Medium Voltage Power Cable
Other sizes available upon request
Liberty of the Seas Courtesy of Aker Yards Oy
-
Marine CablesMedium Voltage Cables
28
Marine Cables
Armoured Medium Voltage Power Cable
MV-FHFX/A12/20 (24) kV
(TEMA-A)
> Construction IEC 60092-354 and IEC 60092-350> Materials
IEC 60228 (conductor) IEC 60092-351 (insulation) IEC 60092-359
(sheath)> Flame Retardance IEC 60332-3-22 (cat A) and IEC
60332-1-2> Halogen Free Properties IEC 60754-1 and -2> Low
Smoke Emission IEC 61034-1 and -2> Tests IEC 60092-354>
Choice and Installation IEC 60092-352> Maximum conductor
temperature +90 °C
> Conductor Flexible copper conducter (class 5)> Conductor
screen Semiconductive tape and extruded compound> Insulation
Extruded off-white XLPE, nominal thickness 5,5 mm> Insulation
screen Extruded semiconductive compound> Metallic Screen Copper
tapes> Inner Covering Extruded halogen free compound> Armour
Braid of copper wires> Sheath Extruded red halogen free
compound, SHF1
Design
Standards
-
Marine CablesMarine Cables
29
Conductor Core Inner Cover Braid CableSize Diameter Diameter
Thickness Diameter Diameter Weight
approx. approx. approx. approx. approx. approx.(n x mm2) (mm)
(mm) (mm) (mm) (mm) (kg/km)
MV-FHFX/A (FE4H1M1AM1)
1x150 15,6 29,3 1,2 33,4 38,0 2670
MV-FHFX/A (FE4H10M1AM1)3x35 7,5 21,2 1,2 51,3 58,0 47803x50 8,7
22,4 1,2 53,9 60,0 5450
Size Current Conductor Resistance Inductance Capacitancerating
at +45 ˚C RDC L C
ambient 1)(W/km)
(n x mm2) (A) at +20 ˚C at +45 ˚C at +85 ˚C (mH/km) (mF/km)
MV-FHFX/A (FE4H1M1AM1)1x150 369 0,124 0,136 0,156 0,366
0,273
MV-FHFX/A (FE4H10M1AM1)3x35 104 0,524 0,575 0,658 0,395
0,1693x50 130 0,387 0,425 0,486 0,376 0,1851) IEC 60092-352 Table
B.4 x 0,95 (see also Tables A.1 - A.8)
Armoured Medium Voltage Power Cable
Other sizes available upon request
Havila Venus Courtesy of Havyard
-
Marine CablesTechnical Information
30
Marine Cables
GeneralThe rated voltage of a cable must not be lower than the
nominal voltage of the circuit in which it is used. The ambient
temperature during operation should be at least 10 ºC lower than
the maximum conductor temperature allowed to the insulation
material.
Rated VoltageThe rated voltages of cables are expressed as U
o/U(U
m) where
Uo the rated voltage between the conductor and earth,
or between the conductor and the metal screen for which the
cable is designed.U the rated voltage between the conductors for
which the cable is designed.U
m the highest system voltage for which the cables
may be used
Installation TemperatureThe minimum installation temperature for
thermoplastic sheathed cables is –15 ºC. If, however, the cables
are warmed up prior to installation, they can be installed at lower
temperatures. Lowest operation temperature -40 °C
Earthing of BraidsEarthing of braids is to be carried out in
accordance with the regulations of the classification society.
During installation the recommended radius is 1,5 times the
value given in the table. Maximun pulling tension P = 50 N/mm2 x
total conductor cross section mm2 value of the cable.
Insulation Outer covering Overall diameter of
cable (D)
Minimum internal radius
of bend
Thermoplastic or thermosetting with circular
copper conductors
Unarmoured or unbraided
≤25 mm 4D
≥25 mm 6D
Metal braid screened or armoured
Any 6D
Metal wire armoured Metal tape armoured
or metal sheathedAny 6D
Composite polyester/metal
laminate screened units or collective tape
screening
Any 8D
Thermoplastic or thermosetting with shaped
copper conductors
Any Any 8D
Medium voltage cable Any
single core 12D
3-core 9D
Bending RadiusThe minimum bending radii according to IEC
60092-352 in the final fixed assembly:
Photos Martin Pekuri
-
Marine CablesMarine Cables
31
Special precautions for single core cables for a.c.
wiringWhenever possible, a.c. wiring should be carried out with
multicore cables. When it is necessary to use single core cables,
they should either be unarmoured or armoured with a non-magnetic
material.
When several multi or single core cables are connected in
parallel per phase, they should be of the same type and equal
length.
All cables pertaining to the same phase should be alternated
with those of the other phases to avoid unequal division of the
current. In the case of two cables per phase, for example, the
correct dispositions to conform with IEC 60092-352 (phases 1, 2 and
3) are:
Some other installation examples of single core cables (phases
1, 2 and 3)
1
1 2
23
31 12 23 3 or
231
213
or
1
2
31
2
3
1
2
31
2
3 1
2
31
2
3
1
2
3 1
2
3
1
2
3 1
2
3
123
1 2 3 123
1 2 3
Four cables per phase
or
Six cables per phase
123
1 2 3
123
1 2 3123
1 2 3
or
1
2
31
2
31
2
31
2
3 1
2
3 1
2
31
2
3 1
2
31
2
3 1
2
3
Ten cables per phase on the same cable tray
Photos Martin Pekuri
-
32
Marine Cables
32
Marine CablesCurrent Rating
Conduc-tor
cross section
Current rating for continuous service. Conductor temperature
max. +90˚C, ambient max +45˚C.
According to IEC 60092-352, Table B.4 for 0,6/1 kV cables.
Up to 6 cables bunched together.
Cores 1 2 3 4 5 7 12 19 27 37
Reduc-tion 1,00 0,85 0,70 0,70 0,58 0,52 0,44 0,37 0,33 0,30
(mm2) (A) (A) (A) (A) (A) (A) (A) (A) (A) (A)
1,5 23 20 16 16 13 12 10 9 8 7 2,5 30 26 21 21 18 16 13 11 10
9
4 41 34 28 28 24 6 52 44 36 36 30 10 72 61 50 50 42 16 96 82 67
67 56 25 127 108 89 89 74 35 157 133 110 110 92 50 196 167 137 137
70 242 206 169 169 95 293 249 205 205120 339 288 237 237150 389 331
272 272185 444 377 311 311240 522 444 365 365300 601 511 421
421
Short time duty and intermittent service load correction factors
(according to IEC 60092-352)
Cable diameter
Time constant
Critical dura-tion (rest time between serv-
ice periods)
Service time correction factor
Inter- mittent serv-ice correction
factor
D (mm) T (min) 3xT (min) 30 min 60 min 4 min load + 6 min
rest
5 2,2 6,5 1,058 1,058 1,083 6 2,8 8,3 1,058 1,058 1,127 7 3,4 10
1,058 1,058 1,170 8 4,1 12 1,059 1,058 1,208 9 4,8 14 1,059 1,058
1,242 10 5,5 16 1,061 1,058 1,273 15 9,5 28 1,081 1,059 1,376 20 14
42 1,126 1,066 1,433 25 19 57 1,186 1,081 1,468 30 24 73 1,255
1,105 1,490 35 30 89 1,328 1,137 1,506 40 36 107 1,403 1,173 1,518
45 42 125 1,479 1,212 1,527 50 48 145 1,554 1,254 1,534 60 62 185
1,705 1,341 1,544 70 76 228 1,852 1,432 1,551 80 91 273 1,996 1,522
1,556 90 107 320 2,136 1,613 1,559100 123 368 2,273 1,702 1,562
Ambient temperature correction factors according to IEC
60092-352
Temperature (˚C) 35 40 45 50 55 60 65 70 75
Correction factor 1,10 1,05 1,00 0,94 0,88 0,82 0,74 0,67
0,58
Photos Martin Pekuri
-
Marine CablesMarine Cables
33
Type N Line
2X Blue Brown
3X Brown Black Grey
4X Blue Brown Black Grey
5…37X White or black insulation with numbers
Pair
Core aWhite insulation +
black number
Core b Blue insulation +
black number
12N
13
2 * N - 1
24
2 * N
Type PE N Line
3G G Y Blue Brown
4G G Y Brown Black Grey
5G G Y Blue Brown Black Grey
7…37G White or black insulation with numbers + last core green
and yellow
POWER AND CONTROL CABLE CORES
CONTROL AND INSTRUMENTATION CABLE CORES
Cable with earth coreCable without earth core
Identification Colours
kuvia!
-
34
Marine Cables
34
Marine CablesElectrical Data
Cable Type Cross Conductor Resistance InductanceLM-HF, LSM-HF,
Section (IEC 60228) L
LM-FRHF, LSM-FRHF R
(W/km)(n x mm2) (mm2) at +20 ˚C at +45 ˚C at +85 ˚C (mH/km)
1 x 35 35 0,524 0,575 0,658 0,3161 x 50 50 0,387 0,425 0,486
0,3151 x 70 70 0,268 0,294 0,336 0,3031 x 95 95 0,193 0,212 0,242
0,2921 x 120 120 0,153 0,168 0,192 0,2841 x 150 150 0,124 0,136
0,156 0,2861 x 185 185 0,0991 0,109 0,124 0,2811 x 240 240 0,0754
0,083 0,095 0,2761 x 300 300 0,0601 0,066 0,075 0,2882 x 1,5 1,5
12,1 13,289 15,191 0,3362 x 2,5 2,5 7,41 8,138 9,303 0,3133 x 1,5
1,5 12,1 13,289 15,191 0,3363 x 2,5 2,5 7,41 8,138 9,303 0,3133 x 4
4 4,61 5,063 5,788 0,2933 x 6 6 3,08 3,383 3,867 0,2813 x 10 10
1,83 2,010 2,297 0,2663 x 16 16 1,15 1,263 1,444 0,2543 x 25 25
0,727 0,798 0,913 0,2113 x 35 35 0,524 0,575 0,658 0,2023 x 50 50
0,387 0,425 0,486 0,2003 x 70 70 0,268 0,294 0,336 0,1973 x 95 95
0,193 0,212 0,242 0,1903 x 120 120 0,153 0,168 0,192 0,1893 x 150
150 0,124 0,136 0,156 0,1913 x 185 185 0,0991 0,109 0,124 0,1933 x
240 240 0,0754 0,083 0,095 0,1903 x 300 300 0,0601 0,066 0,075
0,1884 x 1,5 1,5 12,1 13,289 15,191 0,3594 x 2,5 2,5 7,410 8,138
9,303 0,3364 x 4 4 4,61 5,063 5,788 0,3174 x 6 6 3,08 3,383 3,867
0,3044 x 10 10 1,83 2,010 2,297 0,2894 x 16 16 1,15 1,263 1,444
0,2784 x 25 25 0,727 0,798 0,913 0,2674 x 35 35 0,524 0,575 0,658
0,2584 x 50 50 0,387 0,425 0,486 0,2174 x 70 70 0,268 0,294 0,336
0,2134 x 95 95 0,193 0,212 0,242 0,2064 x 120 120 0,153 0,168 0,192
0,2054 x 150 150 0,124 0,136 0,156 0,2094 x 185 185 0,0991 0,109
0,124 0,2094 x 240 240 0,0754 0,083 0,095 0,2064 x 300 300 0,0601
0,066 0,075 0,204
-
Marine CablesMarine Cables
35
Electrical Data
Cable Type Reactance Voltage Drop at +85 ˚C LM-HF, LSM-HF,
cosj=0,8
LM-FRHF, LSM-FRHF(W/km) (mV/Am)
at 50 Hz at 60 Hz DC at 50 Hz at 60 Hz(n x mm2) X50 X60 1-phase
3-phase 1-phase 3-phase
1 x 35 0,099 0,119 1,316 1,172 1,015 1,195 1,0351 x 50 0,099
0,119 0,972 0,896 0,776 0,920 0,7961 x 70 0,095 0,114 0,673 0,653
0,565 0,675 0,5851 x 95 0,092 0,110 0,485 0,498 0,431 0,520 0,4501
x 120 0,089 0,107 0,384 0,415 0,359 0,436 0,3781 x 150 0,090 0,108
0,311 0,357 0,309 0,379 0,3281 x 185 0,088 0,106 0,249 0,305 0,264
0,326 0,2821 x 240 0,087 0,104 0,189 0,255 0,221 0,276 0,2391 x 300
0,090 0,108 0,151 0,229 0,198 0,251 0,2172 x 1,5 0,106 0,127 30,382
24,432 21,159 24,458 21,1812 x 2,5 0,098 0,118 18,606 15,003 12,993
15,026 13,0133 x 1,5 0,106 0,127 30,382 24,432 21,159 24,458
21,1813 x 2,5 0,098 0,118 18,606 15,003 12,993 15,026 13,0133 x 4
0,092 0,111 11,575 9,371 8,115 9,393 8,1353 x 6 0,088 0,106 7,734
6,293 5,450 6,314 5,4683 x 10 0,083 0,100 4,595 3,776 3,270 3,796
3,2883 x 16 0,080 0,096 2,888 2,406 2,084 2,425 2,1003 x 25 0,066
0,080 1,825 1,540 1,334 1,556 1,3473 x 35 0,064 0,076 1,316 1,129
0,978 1,144 0,9913 x 50 0,063 0,075 0,972 0,853 0,738 0,868 0,7513
x 70 0,062 0,074 0,673 0,612 0,530 0,627 0,5433 x 95 0,060 0,072
0,485 0,459 0,398 0,474 0,4103 x 120 0,059 0,071 0,384 0,379 0,328
0,393 0,3403 x 150 0,060 0,072 0,311 0,321 0,278 0,335 0,2913 x 185
0,061 0,073 0,249 0,272 0,235 0,286 0,2483 x 240 0,060 0,072 0,189
0,223 0,193 0,237 0,2063 x 300 0,059 0,071 0,151 0,192 0,166 0,206
0,1784 x 1,5 0,113 0,136 30,382 24,441 21,167 24,468 21,1904 x 2,5
0,106 0,127 18,606 15,011 13,000 15,037 13,0224 x 4 0,099 0,119
11,575 9,380 8,123 9,403 8,1444 x 6 0,096 0,115 7,734 6,302 5,457
6,324 5,4774 x 10 0,091 0,109 4,595 3,785 3,278 3,807 3,2974 x 16
0,087 0,105 2,888 2,415 2,091 2,436 2,1094 x 25 0,084 0,101 1,825
1,561 1,352 1,581 1,3694 x 35 0,081 0,097 1,316 1,150 0,996 1,169
1,0134 x 50 0,068 0,082 0,972 0,859 0,744 0,875 0,7584 x 70 0,067
0,080 0,673 0,619 0,536 0,635 0,5504 x 95 0,065 0,078 0,485 0,465
0,403 0,481 0,4174 x 120 0,064 0,077 0,384 0,385 0,333 0,400 0,3464
x 150 0,066 0,079 0,311 0,328 0,284 0,343 0,2974 x 185 0,066 0,079
0,249 0,278 0,241 0,294 0,2544 x 240 0,065 0,078 0,189 0,229 0,198
0,245 0,2124 x 300 0,064 0,077 0,151 0,198 0,171 0,213 0,184