This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
SLA 1 Single arm, slips over 4” pole WEIGHT: 12 LBS. EPA: 1.09
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
19.5 in 19.5 in
495 mm
24.1 in 24.0 in
610 mm
27.6 in700 mm
47.0 in1195 mm
55.0 in1400 mm
47 in1195 mm
SLA 2 Bolts to pole WEIGHT: 6 LBS. EPA: .30
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
19.5 in 19.5 in
495 mm
24.1 in 24.0 in
610 mm
27.6 in700 mm
47.0 in1195 mm
55.0 in1400 mm
47 in1195 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The pole cap shall be cast aluminum. The arm shall be prewired with a quick connector for easy installation. The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection. The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
19.5 in 19.5 in
495 mm
24.1 in 24.0 in
610 mm
27.6 in700 mm
47.0 in1195 mm
55.0 in1400 mm
47 in1195 mm
SLA 1-2Twin arms, slips over 4” pole WEIGHT: 16 LBS. EPA: 1.47
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The pole cap shall be cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arms for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm assembly shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be cast aluminum with an internal wireway. The arm shall be prewired with a quick connector for easy installation.
The arm shall be cast aluminum with an internal wireway. The arm shall be prewired with a quick connector for easy installation.
The arm shall bolt to a 4”/100mm diameter pole .
SLA 4Slips over 4” pole WEIGHT: 14 LBS. EPA: 1.39
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
19.5 in 19.5 in
495 mm
24.1 in 24.0 in
610 mm
27.6 in700 mm
47.0 in1195 mm
55.0 in1400 mm
47 in1195 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation. The arm shall have a cast aluminum fitter welded to the top of the arm for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection. The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
32.0 in815 mm
23.0 in585 mm
Strap paintedto matchfixture color.
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
19.5 in 19.5 in
495 mm
24.1 in 24.0 in
610 mm
27.6 in700 mm
47.0 in1195 mm
55.0 in1400 mm
47 in1195 mm
SLA 4-2Twin arms, slips over 4” pole WEIGHT: 26 LBS. EPA: 2.10
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture.
The attachment point shall have a silicone pad for sealing the fixture to arm connection. The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
24.0 in610 mm
54.0 in1375 mm
30.0 in765 mm
56.5 in1435 mm
48 in1220 mm
54.0 in1370 mm
62.0 in1575 mm
56.5 in1435mm
21 in533 mm
12 in
305
mm 12
in30
5 m
m
21 in533 mm
SLA 7-2Twin arms, slips over 4” pole WEIGHT: 16 LBS. EPA: 2.34 The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
24.0 in610 mm
54.0 in1375 mm
30.0 in765 mm
56.5 in1435 mm
48 in1220 mm
54.0 in1370 mm
62.0 in1575 mm
56.5 in1435mm
21 in533 mm
12 in
305
mm 12
in30
5 m
m
21 in533 mm
SLA 7(5)Slips over 5” pole WEIGHT: 11 LBS. EPA: 1.73
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 5”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 7(5)-2Twin arms, slips over 5” pole WEIGHT: 18 LBS. EPA: 2.60
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 5”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
24.0 in610 mm
54.0 in1375 mm
30.0 in765 mm
56.5 in1435 mm
48 in1220 mm
54.0 in1370 mm
62.0 in1575 mm
56.5 in1435mm
21 in533 mm
12 in
305
mm 12
in30
5 m
m
21 in533 mm
SLA 8UBolts to pole WEIGHT: 5 LBS. EPA: .40
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The arm shall be prewired with a quick connector for easy installation.
The arm shall bolt to a 4”/100mm diameter pole.
24.0 in610 mm
54.0 in1375 mm
30.0 in765 mm
56.5 in1435 mm
48 in1220 mm
54.0 in1370 mm
62.0 in1575 mm
56.5 in1435mm
21 in533 mm
12 in
305
mm 12
in30
5 m
m
21 in533 mm
SLA 8DBolts to pole WEIGHT: 5 LBS. EPA: .40The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
26.0 in26.0 in660 mm
50.0 in1270 mm
52.0 in1320 mm
50.0 in1270 mm
32.0 in815 mm
23.0 in585 mm
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
23.0 in585 mm
41.0 in1040 mm
30.0 in970 mm
60.0 in1525 mm
41.0 in1040 mm
SLA 9-2Twin arms, slips over 4” pole WEIGHT: 24 LBS. EPA: 2.44
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
26.0 in26.0 in660 mm
50.0 in1270 mm
52.0 in1320 mm
50.0 in1270 mm
32.0 in815 mm
23.0 in585 mm
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
23.0 in585 mm
41.0 in1040 mm
30.0 in970 mm
60.0 in1525 mm
41.0 in1040 mm
SLA 10Slips over 4” pole WEIGHT: 9 LBS. EPA: 1.09
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The pole cap shall be cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 10-2Twin arms, slips over 4” pole WEIGHT: 16 LBS. EPA: 1.47
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The pole cap shall be cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
26.0 in26.0 in660 mm
50.0 in1270 mm
52.0 in1320 mm
50.0 in1270 mm
32.0 in815 mm
23.0 in585 mm
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
23.0 in585 mm
41.0 in1040 mm
30.0 in970 mm
60.0 in1525 mm
41.0 in1040 mm
SLA 16Slips over 4” pole WEIGHT: 18 LBS. EPA: 2.88The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
26.0 in26.0 in660 mm
50.0 in1270 mm
52.0 in1320 mm
50.0 in1270 mm
32.0 in815 mm
23.0 in585 mm
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
23.0 in585 mm
41.0 in1040 mm
30.0 in970 mm
60.0 in1525 mm
41.0 in1040 mm
SLA 16-2Twin arms, slips over 4” pole WEIGHT: 28 LBS. EPA: 4.38
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 17Slips over 4” pole WEIGHT: 18 LBS. EPA: 1.50
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
40.0 in1015 mm
26.0 in660 mm
46.5 in1180mm
34.0 in864mm
40.0 in1015 mm
52.0 in1320 mm
46.5 in1180 mm
68.0 in1727mm
30.0 in 762 mm
28 in710 mm
31.0 in787 mm
28 in710 mm
SLA 17-2Twin arms, slips over 4” pole WEIGHT: 24 LBS. EPA: 2.05
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
40.0 in1015 mm
26.0 in660 mm
46.5 in1180mm
34.0 in864mm
40.0 in1015 mm
52.0 in1320 mm
46.5 in1180 mm
68.0 in1727mm
30.0 in 762 mm
28 in710 mm
31.0 in787 mm
28 in710 mm
SLA 17 (5)Single arms, slips over 5” pole WEIGHT: 24 LBS. EPA: 2.20
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 5”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 17 (5)-2 Twin arms, slips over 5” pole WEIGHT: 33 LBS. EPA: 2.09
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 5”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
40.0 in1015 mm
26.0 in660 mm
46.5 in1180mm
34.0 in864mm
40.0 in1015 mm
52.0 in1320 mm
46.5 in1180 mm
68.0 in1727mm
30.0 in 762 mm
28 in710 mm
31.0 in787 mm
28 in710 mm
SLA 18Slips over 4” pole WEIGHT: 12 LBS. EPA: .85 The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
40.0 in1015 mm
26.0 in660 mm
46.5 in1180mm
34.0 in864mm
40.0 in1015 mm
52.0 in1320 mm
46.5 in1180 mm
68.0 in1727mm
30.0 in 762 mm
28 in710 mm
31.0 in787 mm
28 in710 mm
SLA 18-2Twin arms, slips over 4” pole WEIGHT: 22 LBS. EPA: 1.59 The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be one piece cast aluminum construction. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
11.9 in 10.5 in
267 mm
19.5 in495 mm
39.0 in990 mm
10.5 in267 mm
19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in
990 mm
32.0 in815 mm
19.5 in495 mm
32.0 in815 mm
32.0 in815 mm
39.0 in990 mm
SLA 20-2Twin arms, slips over 4” pole WEIGHT: 18 LBS. EPA: 1.25 The arms shall be one piece cast aluminum construction. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
11.9 in 10.5 in
267 mm
19.5 in495 mm
39.0 in990 mm
10.5 in267 mm
19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in
990 mm
32.0 in815 mm
19.5 in495 mm
32.0 in815 mm
32.0 in815 mm
39.0 in990 mm
SLA 20ASlips over 4” pole WEIGHT: 15 LBS. EPA: 1.30 The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 20A-2Twin arms, slips over 4” pole WEIGHT: 26 LBS. EPA: 1.94
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
11.9 in 10.5 in
267 mm
19.5 in495 mm
39.0 in990 mm
10.5 in267 mm
19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in
990 mm
32.0 in815 mm
19.5 in495 mm
32.0 in815 mm
32.0 in815 mm
39.0 in990 mm
SLA 20BSlips over 4” pole WEIGHT: 14 LBS. EPA: 1.40The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection. The arm shall slip over a 4”/100mm diameter pole or tenon.
The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
11.9 in 10.5 in
267 mm
19.5 in495 mm
39.0 in990 mm
10.5 in267 mm
19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in
990 mm
32.0 in815 mm
19.5 in495 mm
32.0 in815 mm
32.0 in815 mm
39.0 in990 mm
SLA 20B-2Twin arms, slips over 4” pole WEIGHT: 24 LBS. EPA: 1.70
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 20CSlips over 4” pole WEIGHT: 15 LBS. EPA: 1.39
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
19.4 in 19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in990 mm
26.0 in660 mm
19.5in495 mm
39.0 in990 mm
20.0 in510 mm
20.0 in510 mm
26.0 in660 mm
SLA 20C-2Twin arms, slips over 4” pole WEIGHT: 26 LBS. EPA: 1.91
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
19.4 in 19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in990 mm
26.0 in660 mm
19.5in495 mm
39.0 in990 mm
20.0 in510 mm
20.0 in510 mm
26.0 in660 mm
SLA 20DSlips over 4” pole WEIGHT: 12 LBS. EPA: .75
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
SLA 20D-2Twin arms, slips over 4” pole WEIGHT: 21 LBS. EPA: 1.18
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
19.4 in 19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in990 mm
26.0 in660 mm
19.5in495 mm
39.0 in990 mm
20.0 in510 mm
20.0 in510 mm
26.0 in660 mm
SLA 22UBolts to the side of a 4” dia. pole WEIGHT: 6 LBS. EPA: .60
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
Strap paintedto match fixture color.
32.0 in815 mm
19.4 in 19.5 in495 mm
32.0 in815 mm
39.0 in 39.0 in990 mm
26.0 in660 mm
19.5in495 mm
39.0 in990 mm
20.0 in510 mm
20.0 in510 mm
26.0 in660 mm
SLA 22DBolts to the side of a 4” dia. pole WEIGHT: 4 LBS. EPA: .44The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
38.0 in965 mm
21.0 in535 mm
42.0 in1070 mm
27.0 in685 mm
38 in965 mm
42 in1070 mm
42.0 in1070 mm
56.0 in1422 mm
SLA 24-2Twin arms, slips over 4” pole WEIGHT: 14 LBS. EPA: 1.59
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
38.0 in965 mm
21.0 in535 mm
42.0 in1070 mm
27.0 in685 mm
38 in965 mm
42 in1070 mm
42.0 in1070 mm
56.0 in1422 mm
SLA 24 (5)Twin arms, slips over 5” pole The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
38.0 in965 mm
21.0 in535 mm
42.0 in1070 mm
27.0 in685 mm
38 in965 mm
42 in1070 mm
42.0 in1070 mm
56.0 in1422 mm
SLA 24 (5)-2Twin arms, slips over 5” pole WEIGHT: 16 LBS. EPA: 1.81The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/125mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
14 in356 mm
15 in381 mm
17 in432 mm
17 in
432
mm
14 in356 mm
15 in
381
mm
17 in432 mm
17 in
432
mm
19 in483 mm
21 in
533
mm
18 in457mm
19 in483 mm
TRA 1LWEIGHT: 9 LBS. EPA: .75
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
14 in356 mm
15 in381 mm
17 in432 mm
17 in
432
mm
14 in356 mm
15 in
381
mm
17 in432 mm
17 in
432
mm
19 in483 mm
21 in
533
mm
18 in457mm
19 in483 mm
TRA 2MWEIGHT: 7 LBS. EPA: .62
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
14 in356 mm
15 in381 mm
17 in432 mm
17 in
432
mm
14 in356 mm
15 in
381
mm
17 in432 mm
17 in
432
mm
19 in483 mm
21 in
533
mm
18 in457mm
19 in483 mm
TRA 3WEIGHT: 14 LBS. EPA: .90
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
14 in356 mm
15 in381 mm
17 in432 mm
17 in
432
mm
14 in356 mm
15 in
381
mm
17 in432 mm
17 in
432
mm
19 in483 mm
21 in
533
mm
18 in457mm
19 in483 mm
TRA 5DWEIGHT: 9 LBS. EPA: .62
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
Note: Fixture type and mounting orientation will determine size of arm tail.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
Note: Fixture type and mounting orientation will determine size of arm tail.
18 in457mm
19 in483 mm
15 in381 mm
19 in483 mm
15 in381 mm
19 in483 mm
21 in535 mm
10 in255 mm
13.8 in 352 mm
15.0 in 381 mm
11.25 in286 mm
12.0 in305 mm
TRA 6UWEIGHT: 9 LBS. EPA: .62
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
Note: Fixture type and mounting orientation will determine size of arm tail.
19"
TRA6D
TRA 6DWEIGHT: 9 LBS. EPA: .62
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
Note: Fixture and mounting orientation will determine size of arm tail.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
18 in457mm
19 in483 mm
15 in381 mm
19 in483 mm
15 in381 mm
19 in483 mm
21 in535 mm
10 in255 mm
13.8 in 352 mm
15.0 in 381 mm
11.25 in286 mm
12.0 in305 mm
TRA 56WEIGHT: 8 LBS. EPA: .54
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall bolt to a 4”/100mm diameter pole.
18 in457mm
19 in483 mm
15 in381 mm
19 in483 mm
15 in381 mm
19 in483 mm
21 in535 mm
10 in255 mm
13.8 in 352 mm
15.0 in 381 mm
11.25 in286 mm
12.0 in305 mm
TRA 57WEIGHT: 7 LBS. EPA: .67
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Note: For a 5” O.D. pole.
48.0 in1220 mm
20.5 in520 mm
14.0
in35
5 m
m
50 in1270 mm
24 in610 mm
24.0 in610 mm
22.0 in560 mm
50.0 in1270 mm
22.0 in560 mm
24.0 in610 mm
54.0 in1375 mm
49.5 in1260 mm
54.0 in1370 mm
TRA 4WEIGHT: 16 LBS. EPA: 1.81
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip into a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
48.0 in1220 mm
20.5 in520 mm
14.0
in35
5 m
m
50 in1270 mm
24 in610 mm
24.0 in610 mm
22.0 in560 mm
50.0 in1270 mm
22.0 in560 mm
24.0 in610 mm
54.0 in1375 mm
49.5 in1260 mm
54.0 in1370 mm
TRA 7WEIGHT: 12 LBS. EPA: .90
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
48.0 in1220 mm
20.5 in520 mm
14.0
in35
5 m
m
50 in1270 mm
24 in610 mm
24.0 in610 mm
22.0 in560 mm
50.0 in1270 mm
22.0 in560 mm
24.0 in610 mm
54.0 in1375 mm
49.5 in1260 mm
54.0 in1370 mm
TRA 8WEIGHT: 13 LBS. EPA: 1.34
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
48.0 in1220 mm
20.5 in520 mm
14.0
in35
5 m
m
50 in1270 mm
24 in610 mm
24.0 in610 mm
22.0 in560 mm
50.0 in1270 mm
22.0 in560 mm
24.0 in610 mm
54.0 in1375 mm
49.5 in1260 mm
54.0 in1370 mm
TRA 8-2WEIGHT: 21 LBS. EPA: 2.68
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection. The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
28.0 in710 mm
42.0
in10
70 m
m
55.0 in1400 mm
42.0
in10
70 m
m
TRA 9-2WEIGHT: 25 LBS. EPA: 2.72
The arms shall be of one piece unitized aluminum construction, fully welded and assembled. The slip fitter shall be cast aluminum with an internal wireway and pole stop. The arm shall be prewired with a quick connector for easy installation.
The arms shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall slip over a 4”/100mm diameter pole or tenon. The cast aluminum slip fitter shall have six stainless steel cup point set screws for securing the arm to the pole or tenon.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Note: Back plate is welded to the arm.
5.5 in140mm
16 in406mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
16 in406mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19 in483 mm
19 in483 mm
20 in508 mm
20 in508 mm
14 in356mm
6.62 in168mm
WMA 1LWEIGHT: 14 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Note: Back plate is welded to the arm.
5.5 in140mm
16 in406mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
16 in406mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19 in483 mm
19 in483 mm
20 in508 mm
20 in508 mm
14 in356mm
6.62 in168mm
WMA 2MWEIGHT: 12 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Note: Back plate is welded to the arm.
5.5 in140mm
16 in406mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
16 in406mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19 in483 mm
19 in483 mm
20 in508 mm
20 in508 mm
14 in356mm
6.62 in168mm
WMA 3WEIGHT: 17 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection. Mounting hardware by others.
Note: Back plate is welded to the arm.
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
6 in152 mm
23 in
584
mm
26 in
660
mm
4 in102 mm
26 in660 mm
48 in1219 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
WMA 35UWEIGHT: 12 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
6 in152 mm
23 in
584
mm
26 in
660
mm
4 in102 mm
26 in660 mm
48 in1219 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
WMA 36UWEIGHT: 12 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
6 in152 mm
23 in
584
mm
26 in
660
mm
4 in102 mm
26 in660 mm
48 in1219 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
WMA 36DWEIGHT: 12 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
6 in152 mm
23 in
584
mm
26 in
660
mm
4 in102 mm
26 in660 mm
48 in1219 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
WMA 38WEIGHT: 12 LBS.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
20 in508 mm
14 in356mm
6.62 in168mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
6 in152 mm
23 in
584
mm
26 in
660
mm
4 in102 mm
26 in660 mm
48 in1219 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
39 in991 mm
27 in686 mm
WMA 39WEIGHT: 14 LBS.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
21.5 in535 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19.75 in500 mm
13.81 in351m
6.87 in 174mm
16.0 in407 mm
7.13 in181 mm
1.0 in/25mm wireway hole
.75in/18mm.44in/11mm wireway hole
11.25 in286 mm
18.0 in460 mm
6.88 in175 mm
12.5 in318 mm 5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
23 in584 mm
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
37.5
in95
2 m
m
22 in559 mm
WMA 56WEIGHT: 10 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
21.5 in535 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19.75 in500 mm
13.81 in351m
6.87 in 174mm
16.0 in407 mm
7.13 in181 mm
1.0 in/25mm wireway hole
.75in/18mm.44in/11mm wireway hole
11.25 in286 mm
18.0 in460 mm
6.88 in175 mm
12.5 in318 mm 5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
23 in584 mm
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
37.5
in95
2 m
m
22 in559 mm
WMA 57WEIGHT: 10 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
21.5 in535 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19.75 in500 mm
13.81 in351m
6.87 in 174mm
16.0 in407 mm
7.13 in181 mm
1.0 in/25mm wireway hole
.75in/18mm.44in/11mm wireway hole
11.25 in286 mm
18.0 in460 mm
6.88 in175 mm
12.5 in318 mm 5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
23 in584 mm
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
37.5
in95
2 m
m
22 in559 mm
WMA 5WEIGHT: 6 LBS.
The arm shall be one piece cast aluminum construction. The arm shall be prewired with a quick connector for easy installation. The back plate shall be one piece cast aluminum.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
21.5 in535 mm
5.5 in140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
19.75 in500 mm
13.81 in351m
6.87 in 174mm
16.0 in407 mm
7.13 in181 mm
1.0 in/25mm wireway hole
.75in/18mm.44in/11mm wireway hole
11.25 in286 mm
18.0 in460 mm
6.88 in175 mm
12.5 in318 mm 5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
23 in584 mm
8 in
203
mm
4 in102 mm
7 in
178
mm
3 in76 mm
11 in
279
mm
17 in432 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
37.5
in95
2 m
m
22 in559 mm
WMA 6WEIGHT: 14 LBS.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
22 in559 mm
5.5 in140 mm
25.5
in64
8 m
m16
in40
6 m
m
8 in203 mm
20.1 in 20.0 in500 mm
24.0 in610 mm
6 in152 mm
6 in152 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
22 in559 mm
25.0 in635 mm
48.0 in1220 mm
5 in127 mm
6 in152 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
22 in559 mm
5.5 in140 mm
25.5
in64
8 m
m16
in40
6 m
m
8 in203 mm
20.1 in 20.0 in500 mm
24.0 in610 mm
6 in152 mm
6 in152 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
22 in559 mm
25.0 in635 mm
48.0 in1220 mm
5 in127 mm
6 in152 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm. Fixture type and mounting orientation will determine size of arm tail.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm. Fixture type and mounting orientation will determine size of arm tail.
22 in559 mm
5.5 in140 mm
25.5
in64
8 m
m16
in40
6 m
m
8 in203 mm
20.1 in 20.0 in500 mm
24.0 in610 mm
6 in152 mm
6 in152 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm8 in
203 mm
22 in559 mm
25.0 in635 mm
48.0 in1220 mm
5 in127 mm
6 in152 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
22 in559 mm
5.5 in140 mm
25.5
in64
8 m
m16
in40
6 m
m
8 in203 mm
20.1 in 20.0 in500 mm
24.0 in610 mm
6 in152 mm
6 in152 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
16 in406mm
8 in
203
mm
7 in
178
mm
3 in76 mm
4 in102 mm
5.5 in
140mm
25.5
in64
8 m
m
16 in
406
mm
8 in203 mm
22 in559 mm
25.0 in635 mm
48.0 in1220 mm
5 in127 mm
6 in152 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
27.0 in670 mm
39.0 in990 mm
1 1/2 in38 mm
6 in152 mm
28.0 in710 mm
44.0 in1120 mm
6 in152 mm
9 in229 mm
25.0 in635 mm
36.0 in915 mm
5 1/8 in
6 in152 mm
130 mm
Strap paintedto match fixture color.
25 in635 mm
6.0 in152 mm
26 in
660
mm
23 in
584
mm
19.5 in495 mm
10.0 in255 mm
8 in203 mm
5 in127 mm
9 in
229
mm
15.5 in394 mm
5.25 in133 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
27.0 in670 mm
39.0 in990 mm
1 1/2 in38 mm
6 in152 mm
28.0 in710 mm
44.0 in1120 mm
6 in152 mm
9 in229 mm
25.0 in635 mm
36.0 in915 mm
5 1/8 in
6 in152 mm
130 mm
Strap paintedto match fixture color.
25 in635 mm
6.0 in152 mm
26 in
660
mm
23 in
584
mm
19.5 in495 mm
10.0 in255 mm
8 in203 mm
5 in127 mm
9 in
229
mm
15.5 in394 mm
5.25 in133 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
27.0 in670 mm
39.0 in990 mm
1 1/2 in38 mm
6 in152 mm
28.0 in710 mm
44.0 in1120 mm
6 in152 mm
9 in229 mm
25.0 in635 mm
36.0 in915 mm
5 1/8 in
6 in152 mm
130 mm
Strap paintedto match fixture color.
25 in635 mm
6.0 in152 mm
26 in
660
mm
23 in
584
mm
19.5 in495 mm
10.0 in255 mm
8 in203 mm
5 in127 mm
9 in
229
mm
15.5 in394 mm
5.25 in133 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
9 in
229
mm
15.5 in394 mm
5.25 in133 mm
22.5 in575 mm
6 in152 mm
16 in406 mm
31.0 in790 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.
Mounting hardware and J-box by others.
Note: Back plate is welded to the arm.
9 in
229
mm
15.5 in394 mm
5.25 in133 mm
22.5 in575 mm
6 in152 mm
16 in406 mm
31.0 in790 mm
The arm shall be of one piece unitized aluminum construction, fully welded and assembled. The back plate shall be one piece cast aluminum. The arm shall be prewired with a quick connector for easy installation.
The arm shall have a cast aluminum fitter welded to the top of the arm(s) for attaching the fixture. The fixture shall be mounted with three stainless steel bolts through the top of the arm fitter into the fixture. The attachment point shall have a silicone pad for sealing the fixture to arm connection.