84" AND 96" UPRIGHTS 42" 120" UPRIGHTS 34- 1 2 " 34- 1 2 " Contact us direct for fast friendly service (800) 433-8488 SHEET 1 OF 3
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
84" AND 96" UPRIGHTS
42"
120" UPRIGHTS
34-12"
34-12"
Contact us direct for fast friendly service (800) 433-8488
SHEET 1 OF 3
IN BACK TO BACK SECTIONS, TWO SECTIONS ARE PLACED TOGETHER AND WILL SHARE THE BACK BRACE. BACK BRACES SHOULD BE ALTERNATED FROM ONE ROW TO THE OTHER AND END TIE CLIPS ARE TO BE USED AS SHOWN IN DETAIL 5. END TIE CLIPS ARE TO BE USED TYPICALLY ON ALL END UPRIGHTS AND AT LEAST EVERY THIRD INTERMEDIATE UPRIGHT IN THE RUN.
BACK BRACE
42"
34-1/2"
84" AND 96" UPRIGHTS
120" UPRIGHTS
34-1/2"
INTERMEDIATE UPRIGHT
END UPRIGHT
SHELF CLIPS
Contact us direct for fast friendly service (800) 433-8488
SHEET 2 OF 3
ASSEMBLE SHELF CLIPS TO POSTS ASSEMBLE TOP AND BOTTOM SHELVES TO FRAME UNIT
BOLT BACK SWAY BRACE TO REAR POSTS. BACK TO BACK SECTIONS WILL SHARE A BRACE.
ASSEMBLY USED FOR BACK TO BACK SECTIONS ONLY
IMPORTANT NOTE:AFTER A ROW OF SHELVING HAS BEEN ASSEMBLED AND ACCURATELY LOCATED, CAREFULLY LEVEL AND PLUMB THE UNITS AS REQUIRED. DO THIS BY PLACING ONE OR MORE FLOOR PLATES/SHIMS UNDER EACH UPRIGHT POST WHERE REQUIRED.
Contact us direct for fast friendly service (800) 433-8488
SHEET 3 OF 3
END TIE CLIP ASSEMBLY ONLY FOR
ANCHOR POSTS TO FLOOR FILL IN REMAINDER OF SHELVES WITHIN SECTION
BACK TO BACK SECTIONS LEVEL AND PLUMB
Related Documents
