Construction of Toll Plaza AT Km 197+000nha.gov.pk/wp-content/uploads/2016/07/BOQ-Toll...CONSTRUCTION OF TOLL PLAZA (SEHWAN-RATODERO SECTION) IHP Contract No.TP-IHP-N55-03 (1) Sr.

CONSTRUCTION OF TOLL PLAZA (SEHWAN-RATODERO SECTION) IHP

Contract No.TP-IHP-N55-03 (1)

Sr. Description Estimated Cost

(Rs.) %age

Above/ Below Bid Cost (Rs.)

1 Construction of Toll Plaza

95,688,990

Total

95,688,990

Quoted Bid Price (Rs.)

BILL OF QUANTITIES

SUMMARY

Construction of Toll Plaza

AT Km 197+000 (Additional Carriageway of IHP-III)

(Swhwan – Ratodero Road Section 200KM)

CONTRACT NO.TP-IHP-N55-01

Amount in Words __________________________________________________________________

________________________________________________________________________________

Contractor’s Signature_______________________________________________________________________

(Seal & Signature)



BILL OF QUANTITIES

SUMMARY





Bill NO. Description Amount

(RS)

Bill No.01 Earth Work

594,884

Bill No.02 Sub Base & Base Course

19,565,634

Bill No.03 Surfacing

4,956,038

Bill No.04 Rigid Pavement & Drain

20,983,019

Bill No.05 Ancillary Work

8,440,965

Bill No.06 CIVIL WORKS

13,664,136

Bill No. 06 A PLUMBING WORKS

700,551

Bill No. 06 B ELECTRICAL WORKS

11,839,703

Bill No. 06 C EXTERNAL WORKS

2,062,085

Bill No. 06 D STRUCTURAL STEEL CANOPY & RELATED WORKS

10,516,944

93,323,958

Bill No. 06 F STANDARD TOLL BOOTHS

2,365,031

TOTAL FOR TOL PLAZA . 01 Nos

95,688,990



Item Description Unit RATE (RS)

Quantity

Amount (RS)

101 Clearing & Grubbing SM

25.21

2,500.00

63,025.00

104 Compaction of Natural Ground

SM

27.65

2,500.00

69,125.00

106a Excavation of Unsuitable Common Material

CM

363.01

50.00

18,150.50

108a Formation of Embankment from road way Excavation in common material

CM

399.03

142.00

56,662.26

108c Formation of Embankment from Borrow Excavation in common material

CM

447.28

300.00

134,184.00

109a Sub-grade preparation in earth cut

SM

76.89

3,300.00

253,737.00

Bill No .01: EARTH WORK

594,883.76

201 Grainular Sub base CM

1,707.27

1,785.00

3,047,476.95

202 Aggregate Base Course CM

2,162.63

1,161.00

2,510,813.43

203a Asphaltic Base course Class-A

CM

18,469.20

700.00

12,928,440.00

209a Breaking of existing Road pavement

CM

609.55

1,770.00

1,078,903.50

Bill No .02: SUB BASE & BASE COURSE

19,565,633.88

BILL OF QUANTITIES







302a Cut-Back Asphaltic for Bituminious Prime coat

SM

122.59

3,615.00

443,162.85

303a Cut-Back Asphaltic for Bituminious Tack coat

SM

49.10

3,500.00

171,850.00

304 b Double SurfaceTreatmentin Shoulder

SM

469.39

1,733.00

813,452.87

305b Asphaltic Concrete Wearing Course Class-B

CM

20,390.59

173.00

3,527,572.07

Bill No .03: SURFAC E COURSE & PAVEMENT

4,956,037.79

107a Structural Excavation CM

362.33

50.00

18,116.50

107d Grainular Back fill CM

1,881.96

70.00

131,737.20

107e Common Back fill CM

244.67

150.00

36,700.50

401a1ii Concrete class-A1 (on ground) for rigid pavement and barrier.

CM

11,180.72

1,320.00

14,758,550.40

401b Concrete Class-B for drain & protection work

CM

8,060.23

6.00

48,361.38

401f Lean Concrete CM

6,249.40

625.00

3,905,875.00

404a Reinforcement as per AASHTO M-31 Grade-40

Ton

113,286.08

2.00

226,572.16

404b Reinforcement as per AASHTO M-31 Grade-60

Ton

115,911.08

14.00

1,622,755.12

410 Brickwork for manhole crash barrier etc

CM

7,101.53

33.00

234,350.49

Bill No .04: RIGID PAVEMENT & DRAIN

20,983,018.75



601di Precast Reinforce Concrete Kerb new jersey barrier for median (double face)

M

11,410.37

100.00

1,141,037.00

SP-601di

Precast Reinforce Concrete Kerb new jersey barrier for median (one face)

M

6,000.00

107.00

642,000.00

601dii

Precast Kerb in Concrete Class-A1 of size 450x150mm including concrete bedding & hauching.

M

1,076.03

967.00

1,040,521.01

604a Metal Guard Rail M

4,257.02

145.00

617,267.90

604d Steel Post of Metal Guard Rail

M

5,086.35

55.00

279,749.25

607a Traffic Road Sign Category 1 Each

15,821.18

4.00

63,284.72

607b Traffic Road Sign Category 2 Each

19,346.99

4.00

77,387.96

607c Traffic Road Sign Category 3(a)

Each

30,237.48

4.00

120,949.92

607e Traffic Road Sign Category 3(c)

sm

25,279.25

10.00

252,792.50

608h1 Pavement Marking in reflectorized CR Paint 150mm

M

61.39

1,250.00

76,737.50

609c Reflecting Pavement studs raised profile type single sided

Each

691.93

900.00

622,737.00

NSI-1

Providing and placing of RCC pipe 228mm dia for drainage complete with all respect as per drawings.

M

1,268.40

240.00

304,416.00

NSI-2 Apply 03 coats plastic emulsion paint as specified.

SM

357.00

2,700.00

963,900.00



NSI-3 Providing and placing plastic Drums with sand in position as per drawings.

Each

2,000.00

465.00

930,000.00

NSI-4 Providing and placing soft wooden blocks (0.3x0.3x0.3m) in position.

Each

1,322.20

151.00

199,652.20

NSI-5 Providing and placing polythene sheet under rigid pavement.

SM

54.00

4,183.00

225,882.00

NSI-6

Providing and placing 60mm thick tuff tiles paving or equal for foothpath and parking area near building.

SM

984.50

500.00

492,250.00

NSI-7

providing all the material as per Drawings & specifications and making of expension joints as instruction of engineer in-charge.

M

575.00

320.00

184,000.00

NSI-8

providing all the material as per Drawings & specifications and making of construction joints all as instruction of engineer in-charge.

M

688.00

300.00

206,400.00

Bill No .05:ANICILLARY WORKS

8,440,964.96



BILL NO. 06 : TOLL PLAZA

Item #

Description Unit RATE (RS) Quantity Amount

(RS)

Bill No. 06A - CIVIL WORKS Refer to particular specifications(Buildings)III B

1 Excavation 1n foundation, including dressing, leveling, 95% compaction (AASHTO Modififed) and disposal of unuitable/Surplus Material

i) In Common Material consisting of aeolion, alluvial. residual material consisting of gravel, shale volcanic ashes, loam, sand, clay or any combination of these material, altered or weather material and boulders less than one quarter (1/4) cubic meter in volume, embedded in other material.

Cu m

362.33

487.50

176,635.88

ii) In Hard Rock which includes firm and rigid igneous, metamorphic and sedimentary rock. Hard rock constitute firm and continuous bed rock requiring blasting for excaation. This will include boulders larger than one quarter (1/4) cubic meter in volume, provided these are firm and Stable lying in the continuous bed and constitute more than 50% by volume compared to other type of material.

Cu m

1,004.45

48.75

48,966.94

iii) In Medium Rock which includes firm and rigid igneous, metamorphic and sedimentary rock. Medium rock, which can be removed by Ripper attached to a Bulldozer (200 HP) and chiseling.

Cu m

873.22

48.75

42,569.48

iv) In Soft Rock which includes firm and rigid igneous, metamorphic and sedimentary rock, Soft rock, which can be removed by manual Chiseling.

Cu m

600.49

24.38

14,639.95

v) Earth filling, backfilling in plinth, Columns footings, wall footings and any other foundations. v(a). With selected excavated material where available with 95% (AASHTO) compaction (modified proctor) including moistening to optimum moisture content with mechanical means in 6" layers from the natural ground level/excavated level to bottom of Stone Soling (provided separately).

Cu m

244.67

100.00

24,467.00

v(b).With selected quarry/Borrow Common (A-4) material obtained from outside source with 95% (AASHTO) compaction (modified proctor) including moistening to optimum moisture content with mechanical means in 6" layers from the natural ground level/excavated level upto 6" below Stone Soling (provided for separately).

Cu m

447.28

35.00

15,654.80

v(c)With selected quarry/Borrow Granular (A-3) material obtained from outside source with 95% (AASHTO) compaction (modified proctor) including moistening to optimum moisture content with mechanical means in 1 layer of 6" under stone soling (provided for separately).

Cu m

1,881.96

35.40

66,621.38

v(d) With selected quarry/Borrow Structural fill material obtained from outside source with 95% (AASHTO) compaction (modified proctor) including moistening to optitnum moisture Content with methanical means in 6" layers from the natural ground level / Ecavated level upto 6" below Stone Soling (provided for separately).

Cu m

447.28

431.00

192,777.68



2

Providing, applying Termite Control Treatment .(Fipronil (Agenda 25EC)} under foundations and floors as per the requirements of specifications and furnish guarantee that the buildings shall be free from termites, wood bores and other pests, which cause damage to wood and other organic material, for a period of 10 years from the date of completion of buildings.

Sq m

185.96

177.00

32,914.92

3

Lean Concrete (1:4:8) Class 'E' Cyllndrical Compressive Strength f'c=1400 psi i. Under Footing

Cu m

6,249.49

217.74

1,360,763.95

4

Concrete (1:2:4) Class 'C' Cylindrical Compressive Strength f'c= 3000 psi excluding steel and its bending but including shuttering centering and its binding as per drawing and specifications and as directed by Project Manager.

i. Footing Cu m

9,886.73

73.12

722,917.70

ii. Column Cu m

11,191.23

45.41

508,193.75

v. Coping Concrete 3" thick over Parapet Wall as shown in drawing. Cu m

11,536.32

20.47

236,148.47

vi: RCC Roof Beams Cu m

11,536.32

33.97

391,888.79

vii: RCC Roof Slab Cu m

11,980.62

63.20

757,175.18

viii. RCC Iintel/Sill beam, Jamb column in doors /windows, Pea rock Concrete Grout (f'c= 3000 psi) in external walls of the building

Cu m

11,627.17

67.94

789,949.93

ix. RCC stairs Cu m

11,627.17

9.23

107,318.78

5

Providing Reinforcement Steel (Grade-60) including cutting, bending. Placing and binding wire.

Tons 115,911.08

28.20

3,268,692.46

i. Footing

ii. Column

iii. Plinth beam

iv. Brick Masonry

vi. Roof Beam

viii. Roof Slab

ix. Mumty Slab

x. RCC lintel/Sill beam/Jamb columns

ix. RCC Stairs

6a

Bitumen coating 2 coats of Bitumen 0.41b/ft2 (0.21b/ft2 per coat of 40/60 grade) all build surface of foundations, Plinth beam sides exposed to earth, top suface of Plinth beam and Column exposed to earth fill in approved manner and as directed by Project Manager.

Sq m

220.25

450.00

99,112.50

6b Providing and lying 1-1/2" Class C cast in Situ using Find sand mixed with any approved water proofing agent

Sq m

750.00

100.00

75,000.00

7

Stone Soling Providing, Laying, compacting and blocking 4" thick 'Stone soling With 2" down gauge graded Stone Blast with Stone dust filling and fine sand aggregates Over prelaid and precompacted fill, backfill as per specification. (provided for separately).

i. Under Floors

Cu m

2,889.30

45.87

132,532.19

8

i) Vapour Barrier Providing and Laying of Polythene Sheet 500 gauge (0.005") thick prime quality laid over stone soling for Flooring Plinth Protection and ramp as per Specification and as Approved by the Engineer.

Sq m

61.98

483.87

29,990.26



9

First Class burnt brick masonry Work with cement sand mortar i/c curlng etc comp1ete in aII respect

i) 9" thick Wall with 1:4 cement sand mortar with deep stuck Pointing (Ironed Joint by using 10mm round bar to create half grout neck) both horizontally and vertically only on outer wall surface of the building as per drawing and as approvd by the Project Manager

Cu m

7,101.53

128.56

912,972.70

ii). 9" thick Wall with 1:4 cement sand mortar in ordinary finish

Cu m

6,072.35

13.50

81,976.73

iii). 4.5" thick Wall with 1;4 cement sand mortar in ordinary finish.

Cu m

6,072.35

15.43

93,696.36

10

Plaster, 1/2 inch thick on Walls Columns Ceiling inclluidig floating coat unde plaster.

i. On internal and External walls/columns with 1:4 cement sand morter

Sq m

149.05

527.43

78,613.44

ii. On Ceiling/Column with 1:3 cement sand mortar Sq m

170.55

463.21

79,000.47

iii. Providing applying Aluminium Wire Mesh under Plaster including Corner Beads.

Sq m

23.15

55.00

1,273.25

11

Painting: i) Internal (plastic emulsion paint) 3 coats from reputed manufacturer as per spcification in approved manner

Sq m

272.73

527.43

143,845.98

ii) Internal (Enamel paint) 3 coats from reputed manufacturer as per spcification in approved manner

Sq m

495.88

79.50

39,422.46

iii) External (eeather shield paint) 3 coats from reputed manufacturer as per spcification in approved manner

Sq m

241.70

272.88

65,955.10

12

Celling Work

i. P/F Plaster of Paris concrete/gola (4"x5") as per specifications including nailing/screwing as aproved by the Engineer.

Mtr

94.00

27.72

2,605.99

13

Floor Ffriishing i. Providlng and laying of prime quality 8-9mm thick 16 "x 16'' full body Porcelien Tiles for flooring over 3/4' thick i:2 .Cement sand morter bed with approved Porcelain Bonding materiaI and floating coat of cement and as per speifications and approved by the Project Manager. a . 16" x.16' Pre- Polished

Sq m

2,169.48

401.71

871,501.81

ii. Providing and laying of prime quality, local, make, 5mm thick or more glazed ceramic tiles for Bathroom Flooring as per speifications and as approved by the Engineer. Sq m

1,062.95

35.00

37,203.25

iii. Providing and fixing of prime quality pakistani,3/4"thick pre-polished Travera/Botesena or equivalent Marble Slab 24" Wide x 4' long over bed of 3/4" thick 1:2 Cement sand mortar with floatirig coat of cement including making ground edge (bull nose) to marble, grinding, polishing, filling the joint complete in all respect as shown in drawing and as approved by the Engineer.

Sq m

3,062.06

4.50

13,779.27

14

Skirting i. Porcelain tiles for skirtirig: Providing and layig 8-9mm thick Pre polished 5"-6" wide"x 16" long Porcelain tile for skirting as shawn in drawing with approved quality tile bonding material as per specifications and as approved by the Project Manager.

Sq m

1,958.73

26.37

51,651.71

ii. Marble tiles for skirting: Providing and laying of prime quality 1/2" thick 6"x12" Pre Polished Marble tile (Pakistan parlino or equvalent) for skirting with 1:2 cement sand mortar as shown in drawings in approved manner as per specifications i/c finishing etc. complete in all respects and as approved by the Engineer.

Sq m

964.70

1.65

1,591.76



15

Ceramic tile for dado(bathroom walls): Approved prime quality, local make, 5mm thick or higher ceramic tiles for dado or skirting as shown in drawing as per specifications and as approved by the Engineer.

Sq m

1,062.95

47.50

50,490.13

16

Roofing P / L roofing comprising of single layer of tiles 9"x4 1/2"x1 1/2" (225 x113x40 mm) grouted in 1:3 cement sand mortar with water proofing agent laid over 1"mud plaster without Bhoosa, over 3" to 2" earth, over polythyne ,over 1" high density thermopore (Poly Urethene) sheet (tongue and grove),over polythyene over 2 coats of hot bitumen priming coat over RCC Slab complete in all respect as shown in drawing and as approved by the Project Manager.

Sq m

665.30

453.08

301,434.12

17

Doors Frame: Vi) Providing and fixing of 1-1/2" thick single leaf Wooden solid pannaled/patrened door having Deodar wooden framing 1 1/8" thick with 6" Wide top rail, 6" wide middle rail and 9" wide bottom rail with 5mm thick pressed teak ply With impression/design on both side i/c 1-1/2 x 3/8" deodar wood lipping all around the shutter ,with 9" botom rail ,8 " wide lock rail & 6" Wide top rail i/c brass hinges (4 Nos.), all fitting. french polish 3 coats and door handles, imported handle lock and tower bolt etc. complete in all respect as shown in dawing as approved by the Project Manager.

Sq m

9,871.75

72.00

710,766.00

18

Windows Providing and fixing of glazed AIuminum Windows of anodised bronze (15 micron) colour partly fixed and partly sliding using deluxe sections having frame size of 100mm x20mm (4"x3/4") and leaf frame sections of 50mm x 20mm (2"x3/4"), all of 16mm thickness including 5mm thick imported reflected glass with rubber gasket using approved standard latches, . hardware, etc as shown in drawing and as Approved by the Engineer

ii. 2Panel Mercury glass with matel insect screen with aluminium frame. Sq m

8,541.53

33.26

284,091.29

19

Ventilators Providing and fixing Aliminium Ventilator of top huged anodized (15 micron) bronze having frame size 100mm wide x 20mm high x 1.6mm thick sections including 5mm thick imported solar reflective tinted glass with rubber gasket using approved standard latches, hardware etc as shown in drawing and as Approved by the Engineer.

Sq m

11,777.15

9.00

105,994.35

20

Security Grill Providing and fixing of Security Grillin window including 1/2"x1" steel tube frame having 1/8" wall thickness anchored to walls with 1/4" dia concrete anchors 1/2"x1/2"steel bars vertical and horizental weided to steel tube frame as shown on drawing i/c painting 3 coats complete in all respect and as approved by the Project Manager.

Sq m

2,492.00

33.26

82,883.92

21

Carpentry in Kitchen Provinding and fixing in position Kitchen Wooden Cabinets Consisting of 1-1/2"x1-1/2"thick Deodar wood frame with 3/4" thick both sides laminated Vinboard boxing selves,shutters with best quality fittings, all hardware,nails,handles, hinges, complete in all respects as per design and drawing and as approved by the Engineer

i- Wall Mount Cabinets Sq m

5,875.75

15.92

93,541.94

ii- Under Counter Cabinets Sq m

5,875.75

6.89

40,483.92

iii(c)- Providing and laying of 1" thick Marble slab on Kitchen Counter as Shown in Drawing Sq m

8,417.56

5.00

42,087.80



22

i) Providing and fixing of Collapsible Security Gate (Scissor Type) made of 2"x3/8" steel bar at top vertical steel channal 3/4"x1/2"x1/2"x1/8" at 4" c/c (approximately) steel flat crosses 5/8" with best quality roller at top of 1-1/2" diameter run on top steel bar and 1-1/2"x1-1/2"x3/16"angle at each side anchored to substrate including three hold fast per side steel pins and spacers ,12"long handle,locking arrangment inside and out side, 3 coats of painting of black japan cnemeled, complete in all respects as shown in drawing and approved by Project Manager.

Sq m

5,955.69

19.20

114,349.25

ii) Providing and fixing of Hinged Security Gate Consist of1-1/2"x1-1/2"1/8" steel bar at top, middle and bottom, vertical steel flat 1-1/2"x1/4" at 3" c/c (approximately) steel flat crosses 1-1/2"x1/4"including three hold fast per side 12' long handle, locking arrangement inside and out side, 3 coats of painting of black japan cnemeled, complete in all respects as shown in drawing and approved by Project Manager.

Sq m

6,810.45

39.35

267,991.21

TOTAL FOR BILL NO. 06 A - CIVIL WORKS FOR TOLL PLAZAS (03 Nos)

13,664,136.17



BILL NO. 06 : TOLL PLAZA

Item # Description Unit RATE (RS) Quantity Amount

(RS)

Bill No. 06B - PLUMBING WORKS Refer to particular specifications(Buildings)III B

1

Water Closet , English, prime quality, in vitreous china clay, Large size with Porcelain P-trap, plastic body low level 12, liters flushing cistern, Ball type non corrosive siphon valve, flush handle , PVC drain pipe all in prime quality local make as approved by the Project Manager

Nos

11,477.40

3.00

34,432

2

Water Closet , Pakistan Orissa, prime quality, in vitreous china clay, Large size with Porcelain P-trap, plastic body low level 12, liters flushing clstern, Ball type non corrosive siphon valve, flush handle , PVC drain pipe all in prime quality local make as approved by the Project Manager

Nos

6,166.60

6.00

37,000

3

UPVC Pipe for waste and sewage Internal drainage including Vents with cap, properly laid jointed Including branches bends, Ys, tees, fitting, clamps, specials, cutting in floors, walls and making good, extra painting ion pipe to match the color of the building testing, complete in all respect.

110mm Pipe Mtr

1,155.00

95.00

109,725

73 mm Pipe Mtr

767.00

20.00

15,340

Provideing, laying, cutting, jointing, testing and dislnfecting PPRC pipeline in trenches/walls, with socket joints, all pipe specials using PPRC Pipe of DIN 8077 & 8078 rating PN 20 complete in all respects, with specials and valves

50mm pipe Mtr

860.00

25.00

21,500

40mm Pipe Mtr

701.00

80.00

56,080

25mm Pipe Mtr

497.00

90.00

44,730

4

Providing, laying, cutting, jointing, testing and disinfecting PPRC pipeline in trenches, with socket joints, using G.l. Pipe of B.S.S. 1387-1967 complete in all respects, with specials and valves (Medium Quality)

25mm Pipe Mtr

497.00

35.00

17,395

5

Gully trap with RCC cover, Cement Concrete chamber size 6''x 8''x6'' deep in smooth finish Inside & outside, with 3’’ cast Icon P trap

Nos

1,429.67

4.00

5,719

6

Providing and Fixing Wash hand basin with pedestal in approve color prime quality including angle iron bracket set waste pipe, waste coupling complete in all respects as Approved by the Engineer Accessories for Wash Hand Basin are:

Nos

4,343.05

10.00

43,431

i. Water Mixer of Faucet for basin/sink complete in all respect Nos

4,343.05

11.00

47,774

ii. Connecting Pipe

Nos

345.00

22.00

7,590

7

Providing and fixing of best, quality imported Looking Glass 5mm thick including cost of fitting as Approved by the Engineer

Sq m

3,766.00

6.75

25,421



8

Providing and Fixing of Approved prime Quality plastic body Bath Room Accessories Including cast of fitting as Approved by the Engineer including follow:

i. Towel Rail Nos

972.95

5.00

4,865

ii. Soap Dish Nos

497.00

5.00

2,485

iii. Tissue Paper Holder Nos

572.00

9.00

5,148

9

Providing and Fixing PVT floor trap 4''x3'' with concrete chamber all around and 4'' PVT grating complete in all respects as Approved by the Project Manager

Nos

2,484.00

17.00

42,228

10

Providing and Fixing brass valves with wheel/handle, threaded ends all in premium quality local make in internal as follows:

50mm dia Nos

5,175.00

2.00

10,350

40mm dia Nos

4,025.00

2.00

8,050

25mm dia Nos

1,725.00

2.00

3,450

11

Providing and fixing of good quality non return valve with male and female ends

50mm dia Nos

4,140.00

2.00

8,280

12

Providing and fixing of plastic body prime quality Muslim Shower including PVT flexible pipe and CP/Powder coated Double Bib Cock as Approved by the Engineer

Nos

3,422.00

9.00

30,798

13

Providing and fixing of good quality CP/Powder Coated 1/2'' Double Bib Cock as Approved prime quality as Approved by the Engineer

Nos

150.92

9.00

1,358

14

Providing and fixing 1/2'' dia CP/Powder Coated prime quality as Approved by the Engineer

Nos

337.92

22.00

7,434

15

Providing and fixing of steel body prime quality showers Roes including detachable lid pipe as Approved by the Engineer

Nos

6,900.00

3.00

20,700

16

Providing and Fixing approved quality stainless steel sink 33'' x 18'' Pak made complete with angle iron brackets fix into walls ,1/2'' chromium plated sink faucet , 1-1/4'' chromium plated brass waste coupling, unions and PVT drain pipe, complete in all respect and Approved by the Engineer

Nos

9,200.00

1.00

9,200

17

Providing and Fixing of prime quality Gas Burn with Triple Burner stainless steel body with all fixture, PVC gas piping work upto specified location in kitchen, complete in all respect and as Approved by the Engineer

Nos

13,800.00

1.00

13,800

18

Providing and Fixing of 110mm Dia PVC Class-D Rain Water Down pipe with shoe , bends in Ducts including clamps, hold fast as required with the provision of clean out, complete in all respect and Approved by the Engineer

Mtr

1,509.00

30.00

45,270

19

Providing and fixing of foot drain including making gutter and perforated drain covet as shown on drawing

Nos

3,500.00

6.00

21,000

TOTAL FOR BILL NO.06B - PLUMBING WORKS FOR TOLL PLAZAS (03 Nos)

700,551.30



BILL NO. 1O : TOLL PLAZA

Item #


(RS) The rate for all BOQ item shall include providing, construting, fabricating, fixing, executing, applying, as applicable and additionally as otherwise stated against the specific items shall include all materials, labor, efforts, plant and equipment, complete in all respects, as per drawings, approved shop drawings, specifications, as per NEC, NFPA 70 & NEMA, various applicable stipulations, miscellaneous details, as per instruction and as directed by the Engineer. All sampels shall be procured and provided by the contractor at his own cost for approval by the Engineer.

Bill No. 06 C - ELECTRICAL WORKS Refer to particular specifications(Buildings)III B 16030t Supply and wiring for light & fand with 3x1.5mm sq

single core, PVC insulated stranded copper conductor wire in 20mm (3/4") dia PVC conduit recessed in the wall of column, roof etcirequired complete in all respects as approved by the Engineer (Beta Polo Conduit / Pakistan, New Age, Fast Cable)

Point

956.40

67.00

64,079

16030s Supply and wiring for circuit with 2x2.5mm sq, PVC insulated 300/500 voltage grade single core stranded copper conductor wire directly from DB in 20mm (3/4") dia PVC donduit including 1x1.5mm sq cable as ECC recessed in the wall column and roof atc as required complete all in respects as Approved by the Engineer, (Beta Polo Conduit / Pakistan, New Age, Fast Cable)

Point

1,908.00

14.00

26,712

16030x Supply and wiring for light sockets with 2x2.5mm sq + 1x1.5mm sq PVC, insulated 300/500 voltage grade single core stranded copper conductor wire directly from DB in 25mm (1") dia PVC donduit recessed in the wall column and roof atc as required complete all in respects (Beta Polo Conduit / Pakistan, New Age, Fast Cable)

Point

1,908.00

16.00

30,528

16030y Supply and wiring for power sockets with 2x4mm sq + 1x2.5mm sq PVC, insulated 300/500 voltage grade single core copper conductor wire directly from DB in 25mm (1") dia PVC donduit recessed in the wall column and roof atc as required complete all in respects (Beta Polo Conduit / Pakistan, New Age, Fast Cable)

Point

3,816.00

14.00

53,424

16030x Supply and wiring for switch sockets to sockets with 2x2.5mm sq + 1x1.5mm sq PVC, insulated 300/500 voltage grade single core stranded copper conductor wire directly from DB in 20mm (3/4") dia PVC donduit recessed in the wall column and roof atc as required complete all in respects.

Point

1,908.00

26.00

49,608

16030z Supply and wiring for Ari conditioning power soecket of 1x2.5mm sq PVC, insulated 300/500 voltage grade single core stranded copper conductor wire directly from DB in 25mm (1") dia PVC donduit recessed in the wall column and roof atc as required complete all in respects as approved by Engineer. (Beta Polo Conduit / Pakistan, New Age, Fast Cable).

Point

3,816.00

8.00

30,528

16030d Supply and wiring of 4 core PVC / PVC / CU, calbe of 600/1000 V graded in all kinds of existing or given prelaid, pvc conduit in approved manner as shown in drawing complete in all respects, as approved by the Engineer.

i) 4 Core 120mm² PVC / PVC / CU cable Mtr

9,811.50

53.34

523,320

ii) 4 Core 35mm² PVC / PVC / CU cable Mtr

3,035.58

71.62

217,422

Iii) 4 Core 25mm² PVC / PVC / CU cable Mtr

2,291.45

114.29

261,900

iv) 4 Core 16mm² PVC / PVC / CU cable Mtr

1,559.13

109.11

170,122

v) 4 Core 10mm² PVC / PVC / CU cable Mtr

728.38

45.11

32,856



16030d Supply and wiring of single core PVC cable 450/750 Volts

grade in prelaid pvc conduit as ECC with power calbe in approved manner as shown in drawing complete in all respects, as approved by the Engineer. (Pakistan, New Age, Fast)

i) 1x6mm sq Mtr

141.74

137.15

19,440

ii) 1x4mm sq Mtr

102.37

106.37

10,889

iii) 1x2.5mm sq Mtr

82.68

109.11

9,022

16040b Providing and laying PVC conduit conforming to BS-6099 and BS-3506 including excuation back filling, pull boxes, spection boxes, tees, bends, crosses, using accessoties for proper sealing joints, in roof slabs, walls and under floors for power calbes including cutting in wall and floors as required, back filling and making good the cut cavities with cement sand mortar all in approved manner as shown or drawings, complete in all respect as approved by the Engineer (Beta Polo)

i) 100mm dia Mtr

388.47

45.72

17,760

ii) 50mm dia Mtr

183.74

104.24

19,152

iii) 40mm dia Mtr

148.96

257.54

38,363

iv) 25mm dia Mtr

83.67

99.06

8,288

16020b Supply, installation and connecting of gang, switches one or two way with plastic back box including wall cutting, fixing etc, and making good complete in all respect as approved by the Engineer (Clipsal, Legrand)

ii) 2 gang 1 way light controll switch Each 591.20

6.00

3,547

iii) 3 gang 1 way light controll switch Each 591.20

5.00

2,956

iv) 4 gang 1 way light controll switch Each

663.20

8.00

5,306

v) 5 gang 1 way light controll switch Each

723.20

4.00

2,893

vi) 6 gang 1 way light controll switch Each

765.20

14.00

10,713

16020h Supply, installation, connecting and testing prime quality fan dimmer with switch with plastic /pvc back box complete in all respects as approved by the engineer (Clipsal, Legrand)

Nos

186.05

21.00

3,907

16020c Supply, installation and fixing 13, Amps provcarbonate flame retardant 3 pin, Mulitpurpose swithch, socket unit with fancy gang plate fixed on die fabricated power coated metal board recessed in wall or comumn including connectinos as required (Vivace intl socket Clipsal make), complete in all respects

Nos

194.40

43.00

8,359

16020c Supply, installation and fixing 15, Amps provcarbonate flame retardant 3 pin, swithch, socket unit with fancy gang plate fixed on die fabricated power coated metal board recessed in wall or comumn including connectinos as required (Vivace intl socket Clipsal make), complete in all respects

Nos

194.40

21.00

4,082



16050c Supply, installation, connecting and testing of

fluorescent tube light fitting fixture, 4' length with frame diffuser, electronic ballast ande 28 watts fluorescent TLS tube rod cool day light lamp as Phlips TMS 215 Slimline complete in all respects as Approvec by the Engineer, (Philips pierlite, Osram)

Nos

755.60

16.00

12,090

16050c Supply, installation, connecting and testing of fluorescent tube light fitting fixture, 4' length, complete with frame diffuser, electronic ballast ande 2x8 watts fluorescent TLS tube rod cool day light lamp as Phlips TMS 225 Slimline complete in all respects as Approvec by the Engineer, (Philips pierlite, Osram)

Nos

1,511.20

6.00

9,067

16050c Supply, installation, connecting and testing of 2'x2' fluorescent tube light fitting fixture, complete with electronic ballast ande 4x18 watts fluorescent TLS tube rod cool day light complete in all respects as Approvec by the Engineer.

Nos

5,949.60

8.00

47,597

16050e Supply, installation, connecting and testing of 1x23 W recessed typy Energy Saver Down Light with Bakelite lamp holder reflector (Imported) fitting complete with 1x23 watts CFL lamp as per Philips Cat, No. FBH 145/1x18 W PLC, complete in all respects as required as Approvec by the Engineer.

Nos

480.00

44.00

21,120

16050d Supply, installation, connecting and testing of 1x23 W head lamp holder, reflector (Imported) fitting complete with 1x23 watts CFL lamp complete in all respects as required as Approvec by the Engineer. (Philips, Plerite, Osram)

Nos

2,526.00

12.00

30,312

16050d Supply, installation, connecting and testing of water proof light IP54 complete with electronic ballast, splash profcasing and 1x36 watts flurescent tube rod complete in all respects as required as Approvec by the Engineer. (Philips, Plerite, Osram)

Nos

10,874.40

9.00

97,870

16060e Supply, installation, connecting and testing of 56' sweep ceiling fand with ceiling rose ceiling hook, fan box, matching GI pipe for suitable hight wiring upto termination point complete in all respects as Approvec by the Engineer. (GFC, Climax, Royal)

Nos

3,822.00

13.00

49,686

16060d Supply, installation, connecting and testing of electric exhaust fan including metal, louvers, ON / OFF swithc, calbe, complete in all respects as Approvec by the Engineer. (GFC, Climax, Royal)

iii) 12" Metal Body Nos

2,233.20

9.00

20,099

iv) 18" Metal Body Nos

3,349.20

1.00

3,349

16060d Supply, installation, connecting and testing of 450m (18") sweep wall bracket fan with blades, housing regualtor & pulling cord switch fitted on wall or column with GI clip ncluding connection as required complete in all respect as approved by the Engineer.

Nos

3,349.20

9.00

30,143

16110 Tubewell Providing and construction of Tube Wll with dia boring installed with S" dia SM 14 guage blind pipe, steel strainer. The space between boring wall and MS pipe sahll be filled with coarse sand 1/8" min and 3/8" max in size. The tube well shall be installed with 4" dia 1.5 K.W submercible pump 1" dia GI / HDPE pipe (PE.63) suction pipe as pe rrequirement with respect to ground water, table Electricl Fanel including Circuit breaker, U/OVT relay and plugs PF improvement panel, Soecket RCC pump shade / cover complete in all respect and as per the approval of the Engineer. The length of stainer will depend upon the ground water table and water bearing starta with a minmum 50 ft length. Submercible pump is suppored by 8mm steel insulated wire power cable shall be wraped water proof tape as shown in drawing SB GOLDEN PUMPS)

Mtr

16,405.00

38.10

625,000



16110 Providing , fixing, connecting and testing of (as per manufacturer recommendations) AC single phase pumping set 2HP rating 220 volts, 50 cycles electric motor with centrifugal pump compatible with motor suction and discharge 1" x 1" coupled on a comport base plat. Foundaton bolts 1" dia GI piping connections and required bends, sockets tees, unions etc, gate valve, check valve non-return valve foot valve and strainer at UGT sump level a per drawing, Electrical Panel including Ciruit bradker, U / OVT relay and plulgs, sockets PF improvement panel RCC pump shade / cover, complete in all respect and as approved by the Engineer (KSB, GOLDEN PUMPS)

Job

25,532.40

1.00

25,532

Distrubution Boards

16070 Supply, installation, connecting and testing of Main, panel board consisting of 14 SWG M.S powder coated indoor floor mounted and suitable foundation compelte with all internal wiring, tags, identification labels, TPN&E copper, bus bards, gransparent plastic sheet armoured glands lockable covers, cable brass glands where reqired consisting as follows additinally conforming / complying with details as shown on drawings complete in all respect as approved by the engineer (ABB, MG GE or Eqv)Incoming 01 No. 200 Amps T.P 35 KVA MCCB ADJUSTABLE circuit breaker (ABB or equivalent) 03 Nos - Indication Lamp 01 No - Voltage Selector Switch 01 No - Volt meter (Digital) 7 Point 01 No - Current Selector Switch 01 No - Current Meter (Digital ) 5 Point 06 Nos - 2 Amps Fuses Out Going 01 No. 100 Amps TP RC25KA MCCB 01 No. 16 Amps DP RC 15 KA MCB 01 No - 25 Amps TP RC255KA MCB 01 No - 63 Amps TP RC25KA MCCB 02 No - 30 Amps TP RC25KA MCCB Suitable Common Copper Bus Bar Natural and Earth Bus Bars

Nos

196,009.00

1.00

196,009

16070 Supply, installation, connecting and testing of distribution board (Building DB) consisting of 16 SWG M.S Powder coated indoor recessed tyupe mounting front door access complete with all interval wiring tags indentification lables, TPN&E copper bus bards transparent plastic sheet, lockable, covers, cable brass glands where required consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv)complete in all respect as approved by the engineer (ABB, MG GE or Eqv) Incoming 01 No - 100 Amps T.P MCCB 25 K circuit breaker 03 Nos - Indicatio Lamp 01 No - Volt Meter (Digital) 7 Points 01 No - Volt Selector switch 03 Nos - Vuses Out Going Nos and ratng S.P of MCB circut breaker 09 Nos - 06 Amps SP MCB RC10KA 07 Nos - 10 Amps SP MCB RC10KA 09 Nos - 16 Amps SP MCB RC10 KA 03 Nos - 20 Amps SP MCB RC10KA Suitalbe Common Copper Bus Bar Natureal and Earth connector

Nos

113,674.00

1.00

113,674



16070 Supply, installation, connecting and testing of distribution

board (Genset Room) consisting of 16 SWG M.S Powder coated indoor recessed type mounting front door access complete with all interval wiring tags indentificatino lables, lockable covers, ccalbe brass glands where required TPN&E copper bus bards transparent plastic sheet, consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv) Incoming 01 No - 20Amps DP MCB 15Ka ciruit breaker 03 Nos - Indication Lamp 01 No - Volt Meter (Digital) 5 Points 01 No - Volt Selector swithc 03 Nos - fuses Out Going Nos and ating S.P of MCB circuit breaker 01 Nos - 06 Amps SP MCB RC10 KA 01 No. - 10 Amps SP MCB RC10KA 01 Nos - 16 Amps SP MCB RC10KA Suitable Common Copper Bus Bar Natural and Earth connector

Nos

29,459.00

1.00

29,459

16070 Supply, installation, connecting and testing of distribution board (INTERCHANGE FLOOD LIGHT) consisting of 14 SWG M.S Powder coated indoor recessed type mounted and suitable foundation, weather proof IP54 including front door access complete with all internal wiring tags indentification lables, Photo censor and mounting bracket of Photo sensor for Auto Switching of lights, nagnetic contracors, Fuses, TPN&E copper bus bards transparent plastic sheet, lockable covers, cable brass galnds where required consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv) Incoming 01 No - 20Amps Three POLE MCCB 15Ka ciruit breaker 03 Nos - Indication Lamp 01 No - Volt Meter (Digital) 7 Points 01 No - Volt Selector switch 03 Nos - fuses 01 No - Photo light sensor for auto light swithces Out Going Nos and ating S.P of MCB circuit breaker 01 Nos - Magnetic Contractor 25A 01 No. - 01 Nos - 06 Amps SP MCB RC10KA Suitable Common Copper Bus Bar Natural and Earth connector

Nos

85,487.00

1.00

85,487



16070 Supply, installation, connecting and testing of distribution board (DB ROAD LIGHT) consisting of 14 SWG M.S Powder coated indoor recessed type mounted and suitable foundation, weather proof IP54 including front door access complete with all internal wiring tags indentification lables, Photo censor and mounting bracket of Photo sensor for Auto Switching of lights, nagnetic contracors, Fuses, TPN&E copper bus bards transparent plastic sheet, lockable covers, cable brass galnds where required consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv) Incoming 01 No - 30Amps Three POLE MCCB 25Ka ciruit breaker 03 Nos - Indication Lamp 01 No - Volt Meter (Digital) 7 Points 01 No - Volt Selector switch 03 Nos - fuses 01 No - Photo light sensor for auto light swithces Out Going Nos and ating S.P of MCB circuit breaker 01 Nos - Magnetic Contractor 25A Suitable Common Copper Bus Bar Natural and Earth connector

Nos

85,487.00

1.00

85,487

16070 Supply, installation, connecting and testing of distribution board (CANOPY LIGHTS) consisting of 14 SWG M.S Powder coated indoor recessed type mounted and suitable foundation, weather proof IP54 including front door access complete with all internal wiring tags indentification lables, Photo censor and mounting bracket of Photo sensor for Auto Switching of lights, nagnetic contracors, Fuses, TPN&E copper bus bards transparent plastic sheet, lockable covers, cable brass galnds where required consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv) Incoming 01 No - 50Amps Three POLE MCCB 15Ka ciruit breaker 03 Nos - Indication Lamp 01 No - Volt Meter (Digital) 7 Points 01 No - Volt Selector switch 03 Nos - fuses 01 No - Photo light sensor for auto light swithces Out Going Nos and ating S.P of MCB circuit breaker 01 Nos - Magnetic Contractor 50A 05 No 01 Nos. 16 Amps SP MCB RC10KA 0 Nos. 20 Amps SP MCB RC10KA Suitable Common Copper Bus Bar Natural and Earth connector

Nos

125,487.00

1.00

125,487



16070 Supply, installation, connecting and testing of distribution

board (TOLL BOTH DB) consisting of 14 SWG M.S Powder coated indoor recessed type mounted and suitable foundation, weather proof IP54 including front door access complete with all internal wiring tags indentification lables, Photo censor and mounting bracket of Photo sensor for Auto Switching of lights, nagnetic contracors, Fuses, TPN&E copper bus bards transparent plastic sheet, lockable covers, cable brass galnds where required consisting as follows additionally conforming / complying with details as shown on drawings, complete in all respect as approved by the Engineer (ABB, MG, GE or Fqv) Incoming 01 No - 30Amps Three POLE MCCB 15Ka ciruit breaker 03 Nos - Indication Lamp 01 No - Volt Meter (Digital) 7 Points 01 No - Volt Selector switch 03 Nos - fuses Out Going Nos and ating S.P of MCB circuit breaker 01 Nos - Magnetic Contractor 50A 05 No 01 Nos. 60 Amps SP MCB RC10KA 02 Nos. 16 Amps SP MCB RC10KA 01 Nos - 20 Amps SP CMB RC10KA Suitable Common Copper Bus Bar Natural and Earth connector

Nos

17,884.80

4.00

71,539

Grounding Work

16090 Supply, installation connection, boring / excavation and testing to less than 1 ohm of earthing set with 20mm dia 3 meter long copper rod encased in 3" dia pvc pipe lowerede and burreed in ground in 4" dia boring in all type of soil to water table at required depth, plated connected with 1x70 mm sq HDBC bare cu-conductor from grounding rod to earth lest copper bar as earth connecting point, the remaining cavity around the copper rod shall be filled with gournding enhancement compound packed hard all around the copper rod for MDB grounding pole light gounding and lighting protection gounding complee in all respect as approved byt the engineer.

Job

55,000.00

3.00

165,000

16090 Supply, installation 12" long 2", wide 1/2" thick (12"x2"x1/2") copper bus bar as earth connecting point (ECP). The (E.P) shall be complete with insulator, washers, nuts, bolts, mounting installation and operational accessories as per technical specificaiton and as per site requirement complete in all resepct as approved by the engineer.

Job

2,655.20

3.00

7,966

16090 Supply, installation and wiring of single core 1x70mm sq PVC copper wire 600/1000 volts grade in prelaid pvc conduit from ECP to MDB as ECC conductor in approved manner as shown in drawing complete in all resepct as approved by the engineer (Pakistan, New Age, Fast Cable).

Mtr

771.69

21.33

16,464

16090 Supply and construction of 2ftx2ft and 2ft deep brick Masonry hand hole to cover earthing GI pipe tee i/c comented door, inside 1:4 plaster and 1ftx1ft RCC cover flush on floor complete in all respect as Approved by Engineer.

Job

6,000.00

3.00

18,000

16090 Supply and installation of 1 1/2" x 1/3" copper strip from top of building (lighting spike) to ECP earthing point inclading brass saddle at 1 ft interval, brass screw etc complete complete in all respect as Approved by Engineer.

Mtr

2,362.32

15.24

36,000

16090 Supply and installation on top of building 1" dia meter 3ft long lighting copper rod with ball and five spikes fix on head complete in all respect as Approved by Engineer.

Job

14,000.00

1.00

14,000

Road pole lighting



16050g Supply and installation of mild steel tubular swaged /

welded siliver enmeled painted road light single arm pole of over all length 10 Mtrs having 3 steps and dimension of 150x100x75mm & tube thickness 6.5.4mm respectively for fixing road light complete with M.S baseplate having 20mm thickness and 300sqmm long corved bracket with 800mm radius for mounting light fixture with all required civil works (including PCC foundaions wherever required as pe relevant standards and as per instructions) with suitable precautions for ensuring prevention of watering ressand proper water proof termination of calbes and wires complee naneatand satifactory manner complete in all respect as Approved by the Engineer.

Job

90,000.00

8.00

720,000

16050g Supply and installation of mild steel tubular swaged / welded siliver enmeled painted road light double single arm pole of over all length 10 Mtrs having 3 steps and dimension of 150x100x75mm & tube thickness 6.5.4mm respectively for fixing road light complete with M.S baseplate having 20mm thickness and 300sqmm long corved bracket with 800mm radius for mounting light fixture with all required civil works (including PCC foundaions wherever required as pe relevant standards and as per instructions) with suitable precautions for ensuring prevention of watering ressand proper water proof termination of calbes and wires complee naneatand satifactory manner complete in all respect as Approved by the Engineer.

Job

100,000.00

6.00

600,000

16050d Supply, fixing and installation of Road lighting luminaire suitalbe on pole for use with High Presure Sodium Vapour Philips SGP 338 SON-T 250W lamp including housng cum reflector of deep drawin aluminum powder coated in grey colour outside and all electricla accessories such as energy efficient copper ballast electronic ingitor power factor improvement copacitor etc are pre-wired upto to terminal block and mounted on a specially desinged detachalbe gear plate. Conformance to IP 54 protection complete in all respect as Approved by the Engineer.

Job

36,697.00

20.00

733,940

16070 Supply and fixing of function box concelead in foundaton with lockable cover, dust and wheathe proof gasket 250mmx200mmx150mm deep junction box nominal size of 16 SWG thick MS sheet cable looping box with the existing pole with MS clamp made out of 25mmx3mm thick at iron with suitable nuts and bolts complete with hinged cover and locking screws earth studs neoperene gasket suitalbe for pole mounted including supply and fixing one no 6 Amp MCB carrier with base and 4 way + grounding 60 Amp terminal block suitable to receive PVC armoured cable fixed on suitable size bakelite sheet base complete with connection painting as required complete in all respect as Approved by the Engineer.

Job

4,530.00

20.00

90,600

16040 Supply and fixing of PVC pipe sleeve 40mm dia Nominal 2.5 mtr length along the pole or protection of underground cable as required (vertical length) as required, complete in all respect as Approved by the Engineer. (Polo Beta)

Job

582.00

20.00

11,640

16030d Supply, laying, installation, glanding and termination of 3 core 2.5 Sqmm PVC insulated copper flexible cable 13meters in length in tubular pole glands, nuts bolts, required accesssries for providing supply to the street lights as required as approved by the Engineer (Pakistan, New Age, Fast Cable)

Job

2,106.00

10.00

21,060



16030d Supply, laying , glanding, termination, testing and

commissoning of the flowing sizes of 600/1000V grade PVT insulated and PVT sheathed armoured copper stranded condulor 4core 16mm.sq power cable and 6mm.sq coppperd cable as ECC connected to grounding pit / ECP in prelaid 40mm cnduit ,complete as required as per specifions as approved by the Engineer (Pakistan, New Age, Fast Cable)

Mtr

1,476.45

284.97

420,750

Toll plaza Canopy & Flood Lighting

16050h Supply & installation of type mild steel tubular swaged/welded Road lihgt pole of over all length 9M having 3 sreps and dimension of 150x100x175mm & tube thickness 6-5-4mm respectively for fixing road light complete with MS baseplate having 20mm thickness and 300sqmm long curved bracket with 800mm fadius for mounting light fixture with all required civil works (Including PCC foundations wherever required as per relevat standards and as per Instructions) with suiablw precaution for ensuring prevention of watering ressand proper water proof-termination of cables and wires completed in all stalsfactory manner as approved by the Engineer.

Job

117,653.00

6.00

705,918

16050d Supply. Fixing and installation of Road lighting luminare suitable onpole for use with High Pressure Sodlum Vapour Philips Tango 3 T 250W lapm including housing cum reflector of deep drawn aluminlum, powder coated in grey colour ballas electronic lgnitor, power factor improvement capacitor etc, are apre wired upto a terminal block and mounted on a specially designed detachable gear plate Conformance to P 54 protection complete in all respect as Approved by the Engineer

Job

24,790.00

10.00

247,900

16050d Supply fixing and Installation of toll plaza canopy luminaire rececessed type Philips MPF-932 400wa-ts HPIT Muli, Ballast & lam including housing cum reflector and all electrical accessories such as energy efficient multi ballast, electronic ignitor, power factor improvement capacitor etc, are p e-wired upto a terminal block and mounted on a specially designed detachable gear plate Conformance to IP 54 protection complete in all respect as Approved by The Engineer

Job

24,790.00

8.00

198,320

16050h Supply and fixing of GI Bbraket silver enameled on top the pople for the installation of the integral flood light luminaire at 9.5 mtr long pole as rewuired for flood/road lights as required

Job

3,207.00

6.00

19,242

16070 Supply and fixing of junction box concelaed in foundation with lockable cover ,dust and wheather proof gasket 250mmx200mmx150mm deep junction box nominal size with SWG thick MS Sheet cable looping box with the existing pole with MS clamp made out of 25mmx3mm thick flat iron with suitable nuts and bolts complete with hinged cover and locking screws earth studs neoprene gasket suitable to receive PVC armoured cable fixed on suitable size Baketillte sheet base complete with connection painting as required, complete in all respect as Approved by The Engineer.

Job

3,500.00

10.00

35,000

16040 Supply and fixing of pvc pipe sleeve 40 mm dia Nominal 2.5 mtr length along the pole or protection of underground cable as required, Complete in all respect as approved by The Engineer (Polo ,Beta)

Job

582.00

10.00

5,820

16030d Supply, laying , installation , glanding and termination of 3core2.5 sqmm PVC insulated copper flexible cable 10.5mtres in length in tubular pole glands, nuts, bolts, required accessories for providing supply to the street lights as required as approved by the Engineer (Pakistan, New Age, Fast Cable)

Job

1,963.00

10.00

19,630



Supply and wiring of single core PVC cable 450/750 Colts

grade in prelaid40mm pvc conduit for flood lights and canopy recessed light in approved manner as shown in drawing complete in all respects as Approved by the Engineer (Pakistan, New Age, Fast)

ii) 1 x 4mm sq

Mtr

204.73

197.20

40,373

Tranformer

16010 Design, fabrication, manufactering, supply, installation testing and commissioning of 200KVA , 11KV/415V outdoor power transformer including all external radiating tubes, oil filling and drainage vales lifting lugs etc with all installation and operation accessories and making oil pit and protection relays ,temperature alarm & devices and separate two grounding systems for neutral and body ground with 3mtr copper 'Road' CC foundation as per required design must tomply all the WAPADA standards and required as per site as per tender specification and as desired by The Engineer

Job

895,900.00

1.00

895,900

16100 Design, fabrication, manufactering, supply, installation testing and commissioning of prime Diesel Generator 100KVA (primary) at 0.8 PF,400voptls, the three phase, 4wire, 50hz at 1500RPM including AVR along with Electronic Panel and switches, tool Kit, Day fuel tank 500ltrs and essential piping systems and transportation at site and separate two grounding systems for neutral and body grounding with 3mtr copper road as Approved by The Engineer of the following brands (SDMO france, PERKINS , GUMMINS UK, MITSUBISHI Japan, CAT UK/USA, F.G. WILLSON UK)

Job

2,975,000.00

1.00

2,975,000

16100 Design, fabrication, manufactering, supply, installation testing and commissioning of Autoransfer switch panel for Diesel Generator 100KVA Including 75A FOUR POLE MCCB Breaker ,timer relays, U/OVT relay, Phase failure relay Auto start ,Auto Shutdown system and transportation at site ,as approved by The Engineer ABB/MG/SCHCNIDER

Job

128,250.00

1.00

128,250

16100 Design, fabrication, manufactering, supply, installation testing and commissioning of Weather Proof and soundproof Canopy (85dB at 1m) Suitable for the above diesel generator set as approved by The Engineer

Job

175,000.00

1.00

175,000

16100 Construction of RCC foundation with Anti-vibration pad for replacement of DG set complete in all respect as approved by The Engineer

Job

74,000.00

1.00

74,000

TOTAL FOR BILL NO. 06 C - ELECTRICAL WORKS FOR TOLL PLAZAS (03 Nos)

11,839,703



Item #


(RS)

Bill No. 06D - EXTERNAL WORKS Refer to particular specifications(Buildings)III B

1 Excavation 1n foundation, for external works including underground wter tank,manhole,septic tank,pit,etc disposal of unsuitable/surplus Material in Common Material consisting of aelion,residual material consisting of gravel,shale volcanic ashes,loam,sand,clay or any combination of these material,altered or weather material and boulders less than one quarter (1/4) cubic meter volume emended in other material.

Cu m

362.33

120.00

43,480

2 v) Earth filling, backfilling with selected excavated material where available with 95% (AASHTO) COMPACTION (modified proctor) includind moistening to optimum moister content with mechanical means in 6" layers from the natural ground level/excavated level.in plinth, Columns footings, wall footings and any other foundations. v(a). With selected excavated material where available with 95% (AASHTO) compaction (modified proctor) including moistening to optimum moisture content with mechanical means in 6" layers from the natural ground level/excavated level.

Cu m

244.67

45.00

11,010

3 Lean Concrete (1:4:8) Class 'E' Cyllndrical Compressive Strength f'c=1500 psi. Cu m

6,249.49

3.00

18,748

4 Concrete (1:2:4) Class 'C' Cylindrical Compressive Strength f'c= 3000 psi excluding steel and its bending but including shuttering centering and its binding as per drawing and specifications and as directed by Project Manager.

Cu m

9,886.73

12.00

118,641

5 Concrete (1:1-1/2:3) Class "B" Cylindrical Compressive Strenth fc=4000 psi(for U/G Water Tank) excluding steel and its bending but including shuttering centring and its binding as per drawing and specifications and as directed by Project Manager.

Cu m

7,915.60

8.00

63,325

6 Concrete (1:1:2) Class "A" Cylindrical Compressive Strenth fc=4500 psi(for rain water disposal line) excluding steel and its bending but including shuttering centring and its binding as per drawing and specifications and as directed by Project Manager.

Cu m

10,676.27

60.00

640,576

7 Providing Reinforcement Steel (Grade-60) including cutting bending placing and binding wire.

Ton

115,911.08

2.00

231,822

8 First Class burnt Brick Masonary work with 1:4 Cement Sand Mortar i/c curing etc complete in all respect.

Cu m

7,101.53

3.00

21,305

9 Fixing and laying of 60mm thick Concrete pavers including 2" sand bedding over prepared base as per drawings and specificatoins and as per Approved by the Engineer.

Sq m

1,113.60

150.00

167,040

10 Plaster, 1/2 inch thick 1:3 Cement Sand Plaster on R.C.C Walls / Ceiling / Slab inclluidig floating coat unde plaster.

Sq m

170.55

50.00

8,528



11 Plaster and Sealant Water proofing on

inside and out side of Underground Water Tank by Acrylic Polymer modified cementitious coating brush applied trowel finished, three coats,including 10mm white aggregate protection cover layer on inside and covering slurry plaster outside 2-3mm of minimum thickness,complete in all respect as per manufactur's instruction and approved by the Project Manager.

Sq m

233.15

25.00

5,829

12 CI Cover for U/G & Over Head Water Tank Providing and fixing Alass C-250BS EN:124 (70Kg) CI Cover 18"x18" with T-shape CI frame with fish tail anchors embedded in slab and locking arrangment as shown in drawing complete in all respect as approved by the Engineer.

Nos

13,800.00

2.00

27,600

13 R.C.C. Cover for Manhole Providing and fixing 3"(75mm) thick RCC manhole cover ,22" (550mm) dia, with tee shaped CI frame of 20"(500mm) clear i/d (frame weighing 40kg) and fish tail anchors embedded in slab, complete in all respect as Approved by the Engineer.

Nos

1,830.94

14.00

25,633

14 Testing of under ground water storage tank as per specifications and as directed by Project Manager.

Nos

9,200.00

1.00

9,200

15 Stone Soling Providing, Laying, compacting and blocking 4" thick 'Stone soling With 2" down gauge graded Stone Blast with Stone dust filling and fine sand aggregates Over prelaid and precompacted fill, backfill as per specification. (provided for separately).

Cu m

2,889.30

15.00

43,340

16 Providing and laying R.C.C. pipe, moulded with cement concrete 1:1-1/2:3 with apigot socket or collar joint etc including cost of reinforcement conforming to B.S.S911 Part I:981,Class "L" including carriage of pipe from factory to site of work lowering in trenchs to correct alignment and grade,jointing,cutting pipes where necessary finshing and testing, etc,complete in all respect as Approved by the Engineer.

12" dia Pipe Mtr

3,508.59

170.00

596,460

17 Over-burnt Brick GRAVEL Filling in Soakage pit Providing,Filling Over burnt brick Gravel Filling in Soakage pit 3" down gauge graded brick gravel as per specification complete in all respect as Approved by the Engineer.

Cu m

1,746.36

14.00

24,449

18 Providing and fixing of 3/8"x6" deep continues ribbed water stopper in UGWT construction joint as per drawing and specification.

Mtr

408.00

12.50

5,100

TOTAL FOR BILL NO. 06D - EXTERNAL WORKS FOR TOLL PLAZAS (03 Nos) 2,062,085



BILL NO. 1O : TOLL PLAZA

Item # Description Unit RATE (RS) Quantity Amount

(RS)

Bill No. 06 E - STRUCTURE STEEL CANOPY & RELATED WORKS Refer to particular specifications(Buildings)III B

7.1 P/F & Steel H Column, 14"x14"(57 Kg/ft) M.S. Ton

160,000.00

2.47

395,200

7.3 P/F & I Purlins "C" Section 150mm x 55mm channels & runners. Ton

160,000.00

0.41

65,600

7.4 P/F & I 1/2 dia M.S bar 2"x2"x1/4" M.S angle plate 3x40mm 3/16" M.S.cleat plate Ton

160,000.00

51.08

8,172,800

7.5 P/F & I M.S base plate 20mm thick (650mm x 650mm size) Ton

160,000.00

3.96

633,600

7.6 P & G Master flow 524 (non shrinkage material) & Gasset plate having 650x650mm foundation. No

11,728.00

1.75

20,524

7.7 S & C 20guage C.G.I Sheet including 50mm long Screws with J Bolts. Sq m

910.80

582.75

530,769

7.11 S&I Cannopy fascia white acrylic sheet Sq m

2,268.00

99.50

225,666

7.14 ii. P/F 2'X2' Matel false celling consisting of gypsum board panels 10-12 mm with Alumunium lamination / fail on back side and design on the front i/c cost of framework of tees angles and 4mm hanging G.I wire, including all wastage and leveling etc, complete in all respect as approved by the Project Manager.

LM

754.20

582.75

439,510

7.15 P & F 24 guage M.S sheet welded with top 16 guage MS Sheet of fascia box.

LM

1,960.80

16.97

33,275

TOTAL FOR BILL NO. 06 E - STRUCTURE STEEL CANOPY & RELATED WORKS FOR TOLL PLAZA

10,516,944



BILL.NO: 6F :STANDARD TOLL BOOTHS

S. No. DESCRIPTION UNIT QUANTITY RATE (RS)

AMOUNT (RS)

NSI-1 P/F of Aluminum Composite Panel on outer side of booth

SM 24.00

550.00

13,200.00

NSI-2 P/F of 2 ply Fiber glass on inner side of toll booth.

SM 25.00

1,918.00

47,950.00

NSI-3 P/F of Insulation Thermo pore 25 kg / cum in between ms sheet and fiber glass in toll booth.

SM 22.00

328.80

7,233.60

NSI-4 P/F of False Ceiling 0.6x0.6 side of toll booth.

SM 4.00

885.02

3,540.08

NSI-5 P/F of Computer and cash table with Lassani (16mm) 3/4" thick

SM 1.00

1,050.79

1,050.79

NSI-6 P/F of Ventilator of Aluminum Sliding shutter with grill in Toll Booth

SM 0.23

13,000.50

2,990.12

NSI-7 P/F of 50mm Sqr. 16 swg Frame Pipe for toll booth

M 93.00

370.70

34,475.10

NSI-8 P/F of 100 mm with 8.0 mm wall thickness steel pipe frame for Toll Booth Protection.

M 50.00

2,620.80

131,040.00

NSI-9 P/F of Tempered Glass 5mm thick in toll booth

SM 7.00

2,211.18

15,478.26

NSI-10 P/F of 10" dia Exhaust fan along with closers and fly netting.

Each 1.00

2,190.00

2,190.00

NSI-11 P/F of Anchor bolts and nuts 16 mm dia 500 mm long in concrete foundation for booth protection pipe.

No 16.00

575.50

9,208.00

NSI-12 P/F of Rawlplug 12.5 mm th. 150 mm long for booth protection pipe.

No 16.00

375.60

6,009.60

NSI-13 P/F of steel base plate 250 mm dia 16 mm th. for booth protection pipe.

No 4.00

400.00

1,600.00

NSI-14 P/F of steel base plate 250x250 mm, 16 mm th. for booth protection pipe.

No 4.00

350.00

1,400.00



NSI-15 Application of 3 coats Golden yellow, green & brown colors as per drawing.

SM 43.00

380.60

16,365.80

NSI-16 P/F of Crest brand LED Slim Panel Lights in False ceiling (12 Watts of Toll Booth as per approved drawing.

No 2.00

1,644.00

3,288.00

NSI-17 P/F of Door lock of Toll Booth as per approved drawing.

No 1.00

2,740.00

2,740.00

NSI-18

P/F of Complete Wiring with PVC conduit in Booth for Exhaust fan, two LED Slim lights, and two sockets, A/C 1.0 ton etc. as per approved drawing.

No 1.00

5,480.00

5,480.00

NSI-19 P/F of Circuit breaker as per requirement. as per approved drawing.

No 3.00

479.50

1,438.50

NSI-20

P/F of one three pin socket outlet 15/20 amps point controlled by one switch wiring complete with pvc single core cable 4 sq. mm in concealed pvc conduit including earth wire.Circuit breaker as per requirement. as per approved drawing.

No 3.00

1,233.00

3,699.00

NSI-21 P/F of Power plug along with accessories.

No 1.00

685.00

685.00

NSI-22

P/I of A/C 1.0 ton ACSON / Mitsubishi or Equal of MS pipe grill fixed for out door unit complete fitting with all safety measures and necessary welding bolts and nuts as required, rubber packing and other materials. Power plug along with accessories.

No 1.00

69,185.00

69,185.00

NSI-23

P/I circuit wiring from DB to Switch board, wiring with PVC single core cable 2.5 sq. mm +1.5 mm as ECC in PVC conduit concealed as per site requirement. of als.Power plug along with accessories.

M 25.00

137.00

3,425.00

NSI-24 Providing of Revolving Chair as per Requirement or as Directed by the engineer

No 1.00

10,500.00

10,500.00

TOTAL FOR 1 NO TOL BOOTH=A 394,171.85

TOTAL FOR 6 NO TOL BOOTH=AX6 2,365,031.07

Construction of Toll Plaza AT Km 197+000nha.gov.pk/wp-content/uploads/2016/07/BOQ-Toll...CONSTRUCTION OF TOLL PLAZA (SEHWAN-RATODERO SECTION) IHP Contract No.TP-IHP-N55-03 (1) Sr.

Documents