This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
A range high quality stainless steel structural wall ties and restraintfixings for construction professionals, available with full technical adviceand project design solutions where required.
SST for connection of new masonry toexisting walls, install at 30 degrees andbend to suit bed joints.SFT for use with timber frames in new buildmasonry.
CODE TYPE LENGTH BOX per/100
BM21 TFT 120.00 250 42.80
Construction tie connecting masonry to totimber framed buildings up to 4 storeys. Supplied with stainless steel annular ring nail.
Masonry Wall Ties
Starter Ties
Timber Frame Ties
Allows bonding of new masonry to steelwork, brick, concrete and timberin variable applications, safety end or plain for debonding purposes.
Quality engineered wall connector system foruse with all brick and block sizes. Provideslateral support to masonry walls in conversion,extension and new building work. Slidinganchor ties to accommodate variable brickcoursing.Galvanised and epoxy coated or stainlesssteel.Suitable for heights up to 3 storeys.
Build in construction joint former providinglongitudinal and vertical masonry movementwhilst maintaining lateral stability andstructural integrity.Bonding ties provide fixing to one side of thejoint while sleeved ties allow masonrymovement.Galvanised and epoxy coated or stainlesssteel.Suitable for heights up to 3 storeys. All formers 2400mm long (2 x 1200mm)Column fix to concrete or steelworkusing fixings pack.
A comprehensive range of remedial wall ties for variable substrates incorrosion resistant austenitic stainless steel, all ties are supplied fullyassembled for speed of installation.
CODE LENGTH DRILL per/1
BM100 200.00 12.00 4.60BM101 225.00 12.00 4.82BM102 255.00 12.00 5.26High quality, high performance 12mm expanders, all stainless steelconstruction. DD140 compliant. BS EN ISO 9000 manufactured.Requires installation tools D,B,E.
CODE LENGTH DRILL per/1
BM103 200.00 12.00 4.95BM104 225.00 12.00 5.26BM105 255.00 12.00 5.68Detail as type 1 tie combined with fast setting torque control systemcomprising shear necked torque nut designed to fail at correct setting ofinner leaf expander. Requires installation tools B, E.
CODE LENGTH DRILL per/1
BM106 195.00 10.00 2.20BM107 220.00 10.00 2.30A cost effective remedial tie using 10mm neoprene expanders,particularly suitable for tying two leaves of masonry of unknown quality.Requires installation tools A, C, E.
CODE LENGTH DRILL per/1
BM108 200.00 12.00 4.00BM109 225.00 12.00 4.36BM110 255.00 12.00 4.92A low stress remedial tie using 12mm PVC expanders, providesexcellent fixing for brick and stonework. DD140 compliant.BS EN ISO 9000 manufactured. Requires installation tools B, D, E.
CODE LENGTH DRILL per/1
BM111 200.00 12.00 4.00BM112 225.00 12.00 4.40BM113 255.00 12.00 4.78External leaf stainless steel mechanical fix and internal leaf resin fix foruse where inner leaf is poor or unknown quality. BS EN ISO 9000manufactured. Requires installation tools B, E.
CODE LENGTH DRILL per/1
BM114 200.00 12.00 3.40BM115 225.00 12.00 3.89BM116 255.00 12.00 4.35External leaf neoprene fix and internal leaf resin fix for use where innerand outer leaves are of soft or unknown materials BS EN ISO 9000manufactured. Requires installation tools B,E.
CODE LENGTH DRILL per/1
BM117 200.00 12.00 2.70BM118 225.00 12.00 2.70Internal and external leaf resin fix for use where mechanical expandersare unsuitable, available with resin retaining sieve for hollow materials. BS EN ISO 9000 manufactured.
CODE DESCRIPTION per/1
BM119 Hex setting tool type A 45.00BM120 Hex setting tool type B 72.00BM121 Threaded setting tool type C 48.00BM122 Threaded setting tool type D 72.00BM123 Fixed head torque wrench type E 300.00
Wall Starter Profiles Remedial Masonry Wall Ties
Joint Forming Profiles
Brick Reinforcement – EML
Brick Reinforcement – Ladder
Build in joint reinforcement providing added strength andstability to masonry walls
TYPE 1
TYPE 2
TYPE 3
TYPE 4
TYPE 5
TYPE 6
TYPE 7
SMR
Stainless steel windposts aredesigned to span verticallybetween floors to providelateral support for brickworkpanels.Connections to masonry orsteel & concrete frames aredesigned to permit installationadjustment and are self-adjusting post installation.Windposts are supplied with all required fixings, bracketryand wallties to suit each application and are designed and manufactured to suit eachindividual project. Contact our sales office for further details.
SAH sliding anchors provide masonry restraintusing cavity stems and slidingties to accommodate coursingand vertical movement. Fulltechnical detail and designservice available.
Manufactured in stainlesssteel with 12mm fixing holesthe stems are 25 x 5mm andhave a maximum servicecapacity of 1Kn per stem.
Stainless steel external leaf masonry fixing with wood screw connectionfor remedial applications in timber framed buildings.Requires installation tools D, C, E.
CODE LENGTH DRILL per/1
BM126 180.00 13.00 9.40
Installed externally these ties allow remedial repairs to steel framedbuildings. Mechanical fix to steelwork and resin fix to outer leafmasonry.Requires installation tools C, E.
CODE LENGTH DRILL per/1
BM127 600.00 12.00 43.50
Stainless steel remedial transverse tie for use with resin systems.Installed across masonry cracking to reinforce and reinstate damagedwalls.Full technical details on request.
CODE LENGTH DRILL per/1
BM126 1000.00 13.00 75.00
A stainless steel lateral restraint system installed externally. Providesstructural restraint and movement prevention to damaged walls by tyingmasonry leaves back to floor joists, ceiling joists or roof structure. Requires installation tools B, D, E.
CODE TYPE per/1
BM129 WPI Windpost POABM130 WP2 Windpost POABM131 WP3 Windpost POABM132 SPN Windpost ties POABM133 SDN Windpost ties POABM134 SNS Windpost ties POABM135 PNS Windpost POA
CODE TYPE LENGTH per/1
BM136 SAH-F 340 min POABM137 SAH-T 340 min POABM138 SAH-U 340 min POABM139 SAH-UF 340 min POABM140 SAH-UT 340 min POABM141 SAH-UC 340 min POAAnchor tiesBM142 SIS POABM143 SPI POA
Remedial Timber Frame Wall Ties Windposts
Sliding Anchors
TYPE 8
Remedial Steelwork Wall Ties
TYPE 9
Crack Stitching Ties
TYPE 10
Lateral Restraint Ties
For full details of all available masonry and stonework fixings and support systems,contact our sales office. Technical support and detailed literature available on allproducts, manufacturing service option for specialists requirements.
17A comprehensive range of joist hangers andtimber connectors designed for constructionprofessionals. Technical details available forall products including nailing specificationsand load calculations on request.
The new Hi-load joist hanger system featuresa unique 2 part design. The shoe adjusts in225mm increments relative to the back plateto give on site adjustability. Build-in or facefix backplates cover all installationapplications. Choice of 3 vertical shoepositions for build-in and 2 positions for facefix backplates.
High quality one piece galvanised joist hangers for timber to timber fixingof joist and constructional timbers.BM217 – 222: 0.9mm mild steel.BM223 – 230: 1.5mm.BM TRADA Q mark certificated.
Hi-Load Joist Hangers
Timber/Timber Joist Hangers
Return configuration. Straddle configuration.
Typical installation detail.
One piece non weldedjoist hangers forsupporting timber joists& beams from masonrywalls.
2.5 or 3.0mm steelthicknessgalvanised z600 finish
BS10142 manufactured.
3 course of fully curedblock or 675mmalternative masonry mustbe constructed abovehanger prior to loading.
Full technicalspecification available onrequest.
For return or straddle configuration add r or sto end of code. Priced onapplication, contactsales office for details.
Typical installation detail.
Speed prongs.
Double shearnailing.
TIMBERCODE WIDTH per/1
BM246 38.00 1.38BM247 44.00 1.38BM248 50.00 1.38
Attaches trusses, girders and rafters towallplates to provide wind restraint.Speed prongs for fast positioning priorto full nailing.
Manufactured from 0.9mm galvanisedmild steel.
CODE WIDTH per/1
BM249 90.00 11.68
Allows lateral movement of up to30mm during installation of roofingtimbers whilst maintaining upliftresistance. Adjustable to suit differingwallplate widths.
Manufactured from 1.5mm galvanisedmild steel.
CODE WIDTH per/1
BM250 90.00 2.78
Provides excellent uplift resistance andload transfer for limited bearingconditions when installing trusses ortimber girders.
Heavy duty face fix hanger for applications requiring additional strengthand safety factors.Bolt and/or nail fix.Manufactured from 2.0mm galvanised mild steel.BM TRADA Q mark certificated.
TIMBERCODE WIDTH per/1
BM243 38.00 1.44BM244 44.00 1.44BM245 50.00 1.44
Precision formed for fast installation andmaximum loads. Speed prongs provideinstant location of the hanger onto thecarrying beam and secures the joist intothe hanger.Manufactured from 1.0mm galvanised mildsteel.BM TRADA Q mark certificated.
Heavy Duty U Hangers
RAFTERCODE WIDTH per/1
BM251 40.00 2.44
A quality engineered site adjustablerafter to ridge connector. Interlockprovides correct nailing positions andautomatic rafter alignment.Manufactured from 1.2mm galvanisedmild steel.
Galvanised truss shoe providing greatersupport for joists and trussconnections. Adjustable legs to suitdiffering lower chords.Manufactured from 1.2mm mild steel.BM TRADA Q mark certificated.
Nailing specification and S.W.L detailson request.
Site adjustable connector for right and left45 degree skewed rafters. Face flangesshould be bent back flush with ridge forend of ridge applications.
Manufactured from 1.5mm galvanised mildsteel.
RAFTERCODE WIDTH per/1
BM254 40.00 3.87
Provides a secure connection forrafters or trusses to timber wallplatesat 45 degree angles. Install on theinside and outside of the wallplate todouble loading capacity.
Manufactured from 1.2mmgalvanised mild steel.
CODE HEIGHT per/1
BM255 114.00 1.86
A general purpose site adjusted connector foruse in reinforcing a wide variety of timberconnections. Slotted for instant, accuratebending.
Manufactured from 1.2mm galvanised mildsteel.
CODE HEIGHT per/1
BM256 85.00 1.88BM257 125.00 2.89
Designed to connect framing timbersat irregular angles from 0-135degrees. Staggered nail pattern toreduce splitting and allow fixing onboth sides of the member.
A versatile connector for connection oftrusses or rafters likely to be subject tohigh wind pressures, also for generalpurpose connection of structuraltimbers.These ties are handed and sold in pairsonly.
Manufactured from 0.9mm galvanisedmild steel.
CODE HEIGHT LENGTH per/1
BM259 30 x 2.5mm 300 1.44BM260 30 x 2.5mm 400 1.74BM261 30 x 2.5mm 500 1.70BM262 30 x 2.5mm 600 2.04BM263 30 x 2.5mm 700 2.34BM264 30 x 2.5mm 800 2.56BM265 30 x 2.5mm 900 2.86BM266 30 x 2.5mm 1000 3.20BM267 30 x 2.5mm 1100 3.42BM268 30 x 2.5mm 1200 3.78BM269 30 x 2.5mm 1300 4.06BM270 30 x 2.5mm 1400 4.34BM271 30 x 2.5mm 1500 4.64BM272 30 x 2.5mm 1600 4.94BM273 30 x 2.5mm 1700 5.22BM274 30 x 2.5mm 1800 5.50BM275 30 x 2.5mm 1900 5.80BM276 30 x 2.5mm 2000 6.20BM277 30 x 5mm 300 1.68BM278 30 x 5mm 400 2.00BM279 30 x 5mm 500 1.98BM280 30 x 5mm 600 2.35BM281 30 x 5mm 700 2.68BM282 30 x 5mm 800 3.02BM283 30 x 5mm 900 3.02BM284 30 x 5mm 1000 3.34BM285 30 x 5mm 1100 3.69BM286 30 x 5mm 1200 3.98BM287 30 x 5mm 1300 4.36BM288 30 x 5mm 1400 4.68BM289 30 x 5mm 1500 4.95BM290 30 x 5mm 1600 5.29BM291 30 x 5mm 1700 5.69BM292 30 x 5mm 1800 6.02BM293 30 x 5mm 1900 6.36BM294 30 x 5mm 2000 6.70
BM295 Stainless steel POA
High Wind Ties
Restraint Straps
Hip Ridge Rafter Connector
HIP Corner Plate Connector
Framing Anchor
Skew Anchors
Light gauge 2.5mm restraintsor heavy gauge 5mm strapsfor lateral restraint of roof,floor and structural members.
Finish: Pre-galvanised andedge coated.
Manufactured to BS 5268 part 3.
Typical applications.
With fast lead times custom restraints are available to order, bent,twisted and cut in any combination in galvanised mild steel or stainlesssteel, contact with your specification and requirements.
BM321 25 x 25.00 18.88BM322 50 x 50.00 22.10BM323 75 x 75.00 29.66
90 degree general purpose bracketsgalvanised finish.
CODE SIZE WIDTH per/1
BM324 70 x 45.00 65.00 2.85BM325 90 x 90.00 65.00 3.78BM326 90 x 150.00 65.00 4.66BM327 150 x 150.00 65.00 5.40
Heavy angles for connection oftimber at 90 degrees.Reinforcement ribs for connectionrigidity. Manufactured from 1.5 and2.5mm galvanised mild steel.
Angle Brackets
Heavy Duty Angle Brackets
Stair Tread BracketsCODE LENGTH per/1
BM320 210.00 5.08
Heavy duty angled brackets for use instructurally sound staircase framingwithout the need for notched ormachined joints.Fixing to be carried out using hexhead coach screws relevant to timbersize.