8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
1/26
Page 1 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Consideration for Optimum Antenna Placement in a Vehicle
Application Note
Issue 1
In-Car RF Lab
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
2/26
Page 2 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Document History
Revision Date History
1 6 NOV 13 Original publication of the document
ContactsGeneral information www.csr.com
Information on this product [email protected]
Customer support for this product www.csrsupport.com
More detail on compliance and standards [email protected]
Help with this document [email protected]
http://www.csr.com/mailto:[email protected]://www.csrsupport.com/mailto:[email protected]:[email protected]://www.csr.com/mailto:[email protected]://www.csrsupport.com/mailto:[email protected]:[email protected]
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
3/26
Page 3 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Trademarks, Patents and LicencesUnless otherwise stated, words and logos marked with ™ or ® are trademarks registered or owned by CSR plc
and/or its affiliates.
Bluetooth® and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc. and licensed to CSR.
Wi-Fi®, Wi-Fi Alliance®, WMM®, Wi-Fi Protected Access® (WPA), the Wi-Fi CERTIFIED logo, the Wi-Fi logo, the
Wi-Fi ZONE logo, and the Wi-Fi Protected Setup logo are registered trademarks of the Wi-Fi Alliance; Wi-Fi
CERTIFIED™, Wi-Fi Direct™, Wi-Fi Protected Setup™, Wi-Fi Multimedia™, and the Wi-Fi Alliance logo are
trademarks of the Wi-Fi Alliance.
Other products, services and names used in this document may have been trademarked by their respective owners.
The publication of this information does not imply that any licence is granted under any patent or other rights owned
by CSR plc or its affiliates.
CSR reserves the right to make technical changes to its products as part of its development programme.
While every care has been taken to ensure the accuracy of the contents of this document, CSR cannot accept
responsibility for any errors.
No statements or representations in this document are to be construed as advertising, marketing, or offering for sale
in the United States imported covered products subject to the Cease and Desist Order issued by the U.S.
International Trade Commission in its Investigation No. 337-TA-602. Such products include SiRFstarIII™ chips that
operate with SiRF software that supports SiRFInstantFix™, and/or SiRFLoc® servers, or contains SyncFreeNav
functionality.
Life Support Policy and Use in Safety-critical ComplianceCSR’s products are not authorised for use in life-support or safety-critical applications. Use in such applications is
done at the sole discretion of the customer. CSR will not warrant the use of its devices in such applications.
Performance and ConformanceRefer to www.csrsupport.com for compliance and conformance to standards information.
http://www.csrsupport.com/http://www.csrsupport.com/http://www.csrsupport.com/
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
4/26
Page 4 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
ContentsDocument History.................................................................................................................................................. 2
Contacts ............................................................................................................................................................... 2
Trademarks, Patents and Licences ........................................................................................................................ 3
Life Support Policy and Use in Safety-critical Compliance....................................................................................... 3
Performance and Conformance ............................................................................................................................. 3
Contents ............................................................................................................................................................... 4
Tables, Figures and Equations............................................................................................................................... 4
1. Introduction .................................................................................................................................................... 6
2. Aspects of Physical Layer............................................................................................................................... 6
2.1. Antenna Characteristics........................................................................................................................... 6
2.2. Free-Space Path Loss ........................................................................................................................... 10
2.3. Reflections and Fading Aspects ............................................................................................................. 11
2.4. Absorption by Interior and Human Body ................................................................................................. 17
3. EMC Aspects ............................................................................................................................................... 20
3.1. EMC inside a Vehicle............................................................................................................................. 20
3.2. EMC to Environment of the Vehicle ........................................................................................................ 20
3.3. Vehicle to Vehicle Interference............................................................................................................... 21
4. Example of In-Vehicle RF-distribution:........................................................................................................... 22
4.1. Test Set-Up........................................................................................................................................... 224.2. Test Results .......................................................................................................................................... 23
5. Conclusions ................................................................................................................................................. 24
Document References......................................................................................................................................... 25
Terms and Definitions.......................................................................................................................................... 26
Tables, Figures and EquationsTable 2.1: Direct and Reflected Path.................................................................................................................... 12
Figure 2.1: Radiated Field of an Isotropic Antenna [1]............................................................................................. 6
Figure 2.2: Schematic: λ/2 Dipole and its Radiation Characteristic [1]...................................................................... 7
Figure 2.3: Monopole Antenna and its Radiation Characteristic [1][3] ...................................................................... 7
Figure 2.4: Inverted F Antenna and its Radiation Characteristic .............................................................................. 8
Figure 2.5: Chip Antenna [2] .................................................................................................................................. 8
Figure 2.6: Typical Chip Antenna Pattern [2]........................................................................................................... 8
Figure 2.7: Patch Antenna..................................................................................................................................... 9
Figure 2.8: Horizontal Radiation Characteristic of a Patch Antenna ......................................................................... 9
Figure 2.9: Vertical Radiation Characteristic of a Patch Antenna............................................................................. 9
Figure 2.10: Graph of Free-Space Path up to a Distance of 2 m............................................................................ 10
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
5/26
Page 5 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 2.11: Graph of Free-Space Path Loss up to a Distance of 20 m.................................................................. 10
Figure 2.12: Example of Multi-Path Horizontal Layer............................................................................................. 11
Figure 2.13: Example of Multi-Path Vertical Layer................................................................................................. 11
Figure 2.14: Cube Model for Multi-Path Investigation............................................................................................ 12
Figure 2.15: Frequency Response with Direct Connection and Multi-Path no Attenuation ...... ...... ...... ...... ...... ...... .. 13
Figure 2.16: Frequency Response with Direct Connection and Multi-Path; Direct Path 25 dB Attenuation ...... ...... .. 13
Figure 2.17: Dual Printed Antennas on a PCB...................................................................................................... 14
Figure 2.18: Reflection Impacts the Antenna Isolation........................................................................................... 14
Figure 2.19: Antenna Isolation with no Reflection Plate......................................................................................... 15
Figure 2.20: Antenna Isolation with a Reflection Plate in 1 cm Distance................................................................. 15
Figure 2.21: Antenna Isolation with a Reflection Plate in 5 cm Distance................................................................. 16
Figure 2.22: Antenna Isolation a Reflection Plate in 10 cm Distance...................................................................... 16
Figure 2.23: Human Body Absorption of Man 1..................................................................................................... 17
Figure 2.24: Human Body Absorption of Woman 1 ............................................................................................... 18
Figure 2.25: Human Body Absorption of Man 2..................................................................................................... 18
Figure 2.26: Human Body Absorption of Man 3..................................................................................................... 19
Figure 2.27: Human Body Absorption of Woman 2 ............................................................................................... 19
Figure 3.1: RF Emission of a Car using Wireless Communication with two Devices (Antennas)....... ...... ...... ...... ..... 21
Figure 3.2: RF Emissions in Crowed Traffic.......................................................................................................... 22
Figure 4.1: Test Set-Up for In-Vehicle RF-distribution Measurement ..................................................................... 23
Figure 4.2: Test Results In-Vehicle RF-Distribution............................................................................................... 23
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
6/26
Page 6 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
1. Introduction
With the introduction of wireless technology inside a vehicle aspects of RF-technology have to be considered in
order to reach acceptable performance levels.
The quality of wireless communication depends on several aspects. Beside the devices used for the wireless link
and their performance the environment has a huge impact, too.
A vehicle as an environment for a wireless link is a very difficult case. The cabin works partly like a Faradaý s cell
and the behaviour of reflections has to be also considered
The automotive environment means that the majority of the wireless links are short ranged, less than 5 meters.
This document provides an overview of the RF considerations needed, in particular antenna placement and design,
to achieve the best possible wireless radio performance. This document primarily considers the physical layer and
some relevant EMC aspects.
2. Aspects of Physical Layer
With respect to the OSI layer model the RF connection is within the lowest layer which establishes the physical
connection and therefore it is called the physical layer. In the following the principal aspects of the RF distribution are
introduced.
2.1. Antenna Characteristics
For wireless communication the antennas are one of the most important devices in the device chain. An antenna is a
converter. It converts the electrical power available at its input to an electric-magnetic field which is radiated in the
free space. And in other direction it picks up the electro-magnetic energy of an available RF field and converts it to
electrical power.
Based on the characteristic of that radiation there are various kinds of antennas. In the following the most important
are introduced.
2.1.1. Isotropic Radiator
The isotropic radiator is a theoretical device which radiated the total power in every direction with same density. It
has a horizontal and vertical diagram of 360 °
Figure 2.1: Radiated Field of an Isotropic Antenna [1]
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
7/26
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
8/26
Page 8 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 2.4: Inverted F Antenna and its Radiation Characteristic
2.1.4. Chip AntennaChip antennas are also easy to use. They could be assembled like a simple component. However, the placement
has to consider the environment of the Chip antenna because there could be some interaction with wiring and
components which are nearby to the chip antenna. A typical version with its radiation characteristic is shown below.
Figure 2.5: Chip Antenna [2]
Figure 2.6: Typical Chip Antenna Pattern [2]
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
9/26
Page 9 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.1.5. Antennas with Wanted Beam Patterns
In some applications it is a requirement that the RF distribution is only within certain directions. This could berealized for example by using more (active and/or passive) elements in case of Yagi antennas [3] or designing a
patch antenna
Figure 2.7: Patch Antenna
Figure 2.8: Horizontal Radiation Characteristic of a Patch Antenna
Figure 2.9: Vertical Radiation Characteristic of a Patch Antenna
Note:
This collection of antenna types is not complete but it covers the most important.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
10/26
Page 10 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.2. Free-Space Path Loss
Every electromagnetic wave radiated from an antenna is attenuated with increasing distance from this antenna. Theattenuation depends on the wave length of RF signal. The formula for free-air attenuation is like following:
Path Loss [dB] = 20 log((4 π d)/ λ)
λ = Wave length [m]
d = distance [m]
Equation 2.1: Free-Space Path Loss based on Wave Length
In case of 2.4 GHz ISM band we got:
Figure 2.10: Graph of Free-Space Path up to a Distance of 2 m
Figure 2.11: Graph of Free-Space Path Loss up to a Distance of 20 m
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
11/26
Page 11 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.3. Reflections and Fading Aspects
Beside the increasing attenuation with distance there is another aspect which is very important for wireless systemsespecially within vehicles. Normally the body of a car is made of metal. Metal however works for RF waves like a
mirror.
In case there are at least two antennas placed in such a vehicle and both transmitting and receiving electromagnetic
waves. With the metal body around them there is a single direct connection but also quite a lot of indirect
connections. These indirect connections are caused on reflections by the surrounding metal body.
So this is a multipath situation. An example of reflections in a multipath environment is shown below:
Figure 2.12: Example of Multi-Path Horizontal Layer
Figure 2.13: Example of Multi-Path Vertical Layer
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
12/26
Page 12 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.3.1. Simple Model of Multipath Investigation:
As shown on the previous page the reflection behaviour inside a car is very complex. In order to get more details of
reflections and its impact to wireless communication a simple model was created:
2.3.1.1. Introduction of the Model
Within a cube two antennas are placed. As the shape of the cube is clear, reflection paths can be estimated:
With the simple assumptions that the surface of the cube reflects RF totally and the characteristic of the
antennas used is nearly isotropic, we got a certain number of paths. This number depends on the amount of
reflections within one path (grade of reflection) we want to consider:
Direct path 0 reflections
One reflection per path
Two reflections per path
Table 2.1: Direct and Reflected Path
The figure 2.14 shows all the reflection paths with one reflection and one example with two Reflections.
Figure 2.14: Cube Model for Multi-Path Investigation
This model is useful to investigate reception performance via the location and during movement, too.
Based on the model above a spread sheet calculation was done. There were some assumptions made:
The cube has a length of 1.5 m.
The antennas were placed at the centre of two opposite surfaces.
Their distance from the outside was 0.25 m.
This example was taken to demonstrate the huge impact of reflection paths.
Antenna 2 Antenna 1
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
13/26
Page 13 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
For this calculation the direct connection and the paths with only one reflection were considered.
2.3.1.2. Results of Simulation
Figure 2.15: Frequency Response with Direct Connection and Multi-Path no Attenuation
Figure 2.16: Frequency Response with Direct Connection and Multi-Path; Direct Path 25 dB Attenuation
It can be seen that the reflections are dominant in this case.
Small changes in antenna placement could also have a significant impact on path attenuation.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
14/26
Page 14 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.3.2. Impact of Reflections to Antenna Isolation
In many vehicles more than one wireless service is used, high independency of these services is required in order to
avoid any impact between them.
With respect to the physical layer it is recommended to use a separate antenna for each service. In order to get high
performance in concurrency, for example between BT and Wi-Fi, a very high isolation between both antennas is
necessary. Otherwise, in case of one service is transmitting while the other is receiving any cross-talk from the
transmitting antenna reduces the reception performance of the other and this finally results in performance reduction.
Therefore great efforts have been made to get high isolation of antennas. However the isolation is also influenced by
the environment of such an antenna configuration.
Assuming there are two antennas at a PCB (one for Bluetooth and one for Wi-Fi). Basic measurements show an
isolation of 30 dB is required. See CSR application note “M2501 Antenna Isolation” [4]
Figure 2.17: Dual Printed Antennas on a PCB
Since the radiations of the antennas are not separated from each other a piece of metal or other reflecting material
could modify the RF-fields and reduce the isolation behaviour:
2.3.2.1. Test Procedure
A metal plate was placed with a certain distance to the PCB with the antennas. The antenna isolation was tested
with no metal plate, with the metal plate in a distance of 1, 5, and 10 cm distance.
Figure 2.18: Reflection Impacts the Antenna Isolation
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
15/26
Page 15 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
2.3.2.2. Test Results
The isolation of the two antennas was measured in the frequency range from 2 to 3 GHz:
Figure 2.19: Antenna Isolation with no Reflection Plate
Figure 2.20: Antenna Isolation with a Reflection Plate in 1 cm Distance
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
16/26
Page 16 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 2.21: Antenna Isolation with a Reflection Plate in 5 cm Distance
Figure 2.22: Antenna Isolation a Reflection Plate in 10 cm Distance
With these results it is strongly recommended to keep a distance >10 cm from a dual antenna to a reflecting surface
in order to maintain suitable antenna isolation.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
17/26
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
18/26
Page 18 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 2.24: Human Body Absorption of Woman 1
Figure 2.25: Human Body Absorption of Man 2
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
19/26
Page 19 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 2.26: Human Body Absorption of Man 3
Figure 2.27: Human Body Absorption of Woman 2
These results show an additional attenuation of the RF-link by 10 to 30 dB caused by human body. Also there is a
wide deviation from person to person and its position related to antennas. In order to find the causes of these
deviations additional investigations are necessary. Also the impact of the clothing has to be considered.
2.4.2. Absorption by Interior
Inside a vehicle there are a lot of materials which impact the RF-distribution as well. A quantitative estimation is very
difficult, because the parameters which are necessary for, depending on the used material, size and location.
However, as long as values of these parameters are not available, it is important to consider them in a qualitativeway.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
20/26
Page 20 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
3. EMC Aspects
RF connections are embedded in a real environment and therefore EMC becomes important. Especially in an
environment which is more and more loaded with RF.
The basic requirements to avoid EMC issues are that a device has limited emissions on the one hand and on the
other it is immune against the remaining emissions created by its environment or other devices.
This means in case of wireless communication inside a vehicle, that these requirements have to be met within the
vehicle and its interaction to its environment.
3.1. EMC inside a Vehicle
A modern vehicle contains a lot of RF distributing devices. Either the RF are wanted signals (for example. wireless
communication) or they are unwanted emissions.Under these circumstances case has been taken to find the optimal placement for antennas.
Keep in mind antennas pick up RF-radiation in a wider frequency range than even the wanted one.
Therefore the following aspects of suitable placement should be considered.
Keep distance to a potential interferer
Avoid that a device which is working at the wanted frequency or could generate harmonics in this
range, is located near to the antenna
Take care of antenna beaming and avoid unwanted emissions
3.2. EMC to Environment of the VehicleIf wireless communication is used inside a vehicle, a certain part of the RF power is transmitted to the outside, too. In
contrast to the metal body the windows do not (or much less) reflect the RF. And so it could pass to the environment.
In case there is another location (house, shop, people using mobile phones, etc.) at which wireless communication is
used, too, a potential interference scenario is created.
For a better illustration we assume a car in which wireless communication is used to connect two devices with one
antenna for each device.
With the further assumption that the RF passes the car through the widows we got the following pattern. Where the
yellow areas caused by antenna 1 and the blue ones are caused by the antenna 2.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
21/26
Page 21 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 3.1: RF Emission of a Car using Wireless Communication with two Devices (Antennas)
It is also very important to consider that the communication inside the car is sensitive to potential interferer located in
the displayed beam areas.
3.3. Vehicle to Vehicle Interference
Further on assuming that the there is heavy traffic and each of the cars use wireless communication in the same way
as described above, there is quite a lot of interference potential.
The following figure illustrates a scenario with 6 cars on a multi lane street. Four cars drive from South to North andtwo in the opposite direction.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
22/26
Page 22 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 3.2: RF Emissions in Crowed Traffic
There is a high probability that with increasing number of cars using wireless communication near to each other
interference effects happen. These effects could cause disturbances and even break downs of the wanted
communication inside of one or more of these cars.
4. Example of In-Vehicle RF-distribution:
4.1. Test Set-Up
In a car, Chrysler Grand Voyager (left hand drive), one transmitting (IFA) and six receiving antennas were placed
according the schematic shown below. RF in the range from 2.4 to 2.5 GHz was transmitted and via a multi-switch
one of the six receiving antenna was connected to a receiver. Then the switch made one step ahead (the next
antenna is connected and the measurement was repeated. This was done for all six receiving antennas.
The testing was done for an empty cabin, a driver, driver and passenger, additionally a person behind the
driver and finally additionally a person behind the passenger.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
23/26
Page 23 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Figure 4.1: Test Set-Up for In-Vehicle RF-distribution Measurement
4.2. Test Results
These figures are the frequency response cures of the different receiving antenna locations. They show the
attenuations with different numbers of passengers inside the vehicle.
Figure 4.2: Test Results In-Vehicle RF-Distribution
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
24/26
Page 24 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
5. Conclusions
A general conclusion on antenna placement in a vehicle cannot be reached, however antenna
placement can clearly be optimised per vehicle based on the required behaviour and the vehicle
characteristics.
Because of the complexity of a vehicles shape its RF reflections behaviour and the various impacts of
absorptions by human bodies and the interior a prediction of the wireless link quality is not possible.
EMC aspects will become more important with the number of vehicles using wireless communication.
Consider that the areas with high RF emissions are bi-directional. This means that devices inside the
vehicle could be interfered from external devices located in these areas and vice versa.
But based on the considerations above the following recommendations can be made:
Place the antenna on a location which minimize the amount of reflection paths:
Reduce the presence of human bodies within the RF-link (a human body absorption of 10 to30 dB should be assumed).
Antenna locations inside the cabin towards the roof, next to B- or C-pillar may advantageous.
Use antenna with beam pattern. Orient the beam to the inside of the vehicle (for example
downwards if it is located next to the roof).
Do not place dual antenna, which have to have high isolation just in-front of reflecting
materials.
Lower the TX power as much as possible to avoid interference of the environment of the
vehicle. The distances inside of a vehicle cabin are short and do not need much power to
pass them (see chapter 2.2). The main part of link quality reduction is done with absorption
and reflection.
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
25/26
Page 25 of 26© Cambridge Silicon Radio Limited 2013 CS-300757-AN1Confidential Information - This material is subject to CSR’s non-disclosure agreement www.csr.com
Document References
Document Reference
Designing an Inverted-F Antenna CS-217944-AN
[1] Wikipedia
[2] Application Note AN048 TI
[3] Antennen.pdf, Fachhochschule Nordwestschweiz
[4] M2501 Antenna Isolation CS-235304-AN
[5] Designing an Inverted-F Antenna CS-217944-AN
8/17/2019 Consideration for Optimum Antenna Placement in a Vehicle -Xx
26/26
Terms and Definitions
CSR Cambridge Silicon Radio
dB decibel
EMC Electromagnetic Compatibility
IFA Inverted F Antenna
PCB Printed Circuit Board
RF Radio Frequency
RX Receive or Receiver
TX Transmit or Transmitter