Connectors Important Information Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights in others. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. *Non preferred articles All Item numbers in the catalogue marked with * are for non preferred non stock items available upon special request. For such products, extended delivery times may apply. Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.
48
Embed
Connectors brochure USA julij 2016 - Holdahl Company · bursting forces · ‘Hi’ thread gives low bursting component force from the sharp 30 degree angle thread · ‘Lo’ thread
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Con
nect
ors
Important Information
Intellectual property
Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights in others. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law.
Responsibility
It is the responsibility of the user to ensure the fi tness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives.
Technical information
While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confi rm the up to date specifi cation before ordering.
*Non preferred articles
All Item numbers in the catalogue marked with * are for non preferred non stock items available upon special request. For such products, extended delivery times may apply.
Trademarks
Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.
2
6
2
9
10
12
16
ConnectorsProduct Guide
Fittings for rigid assembly systems
System 1Page
a highly cost-efective and
rigid assembly system for
factory, consumer and home
assembly
Fittings for face-boring applications
System 2
face boring applications that
provide a tolerant effi cient
assembly
Fittings for face and edge boring
System 3
two component rigid face and
edge drilling fastening
Fittings for face-boring only
System 4
a range of low-cost one-piece
fi ttings for high volume home
assembly applications
Cams and dowels
System 5
a comprehensive range of
cam and dowel connecting
fi ttings for all cabinet
applications
3
Con
nect
ors
3
30
37
Quickfi t-Expando Connectors
System 6
face boring expanding
connectors for all cabinet
applications.
Page
Heavy duty cams and dowels
System 7
High quality fi ttings for offi ces
and public furniture.
4
Why Choose Titus?
Titus connectors improve the quality
of furniture and lower the cost of
manufacturing and assembly
while ensuring a high degree of
customer satisfaction.
Precise and effi cient product design.
The broadest possible range of drilling tolerances ensures reliable
assembly and consistently strong joints.
Klix locking feature, the engagement
of interlocking teeth on cam and
dowel, to prevent joint
loosening in service or transit.
Expanding function provides degrees
of variation in out-of-tolerance drillings
ensuring stronger joints and improved
quality of furniture.
Twinstart thread for faster and more
stable insertion.
Depth stop collar prevents over-
insertion.
Firm tightening for greater confi dence
in use.
Cam locks at 230° assuring smooth
tightening action and greater dowel
pull-up.
Quickfi t for hand dowel insertion.
Quickfi t TL2, TL4 with the built-in self
adjustment feature is the only available
dowel that allows for pre-insertion.
Quickloc one piece fi tting for faster
assembly with integrated expanding
cam and dowel.
Zinc+steel dowel for optimal strength
and performance.
Precise dowel manufacturing
high precision of zinc and strength
of steel assures 100% dimensional
accuracy.
ConnectorsInformation
Titus connectors add value to furniture and to furniture manufacturing
The most advancedrange of connectorsavailable on the market
Easy and quick consumer friendly self-assembly of furniture
Self-assembly furniture offers
consumers good value and instant
availability of products.
With the aim of providing consumer
with simpler instructions, fewer parts
and an easier assembly process, Titus
has signifi cantly reduced and simplifi ed
the number of fi ttings traditionally
required in furniture production.
Titus connectors provide consumers
with easy assembly and furniture
producers with increased productivity:
- reduced number of assembly parts
- easy assembly instructions
- security of packed parts during transit
5
Con
nect
ors
T A N CAF
4 38 3 126
6 21 4 108
6 15 4 84
6 7 4 52
2 3 2 10
2 3 1 5
1 0 1 1
Easy and Quick Furniture Assembly
ConnectorsInformation
CAF formula
How does it work?
Connecting screw (traditional assembly)
Cam & Single start dowel
Cam & Twinstart dowel
Cam & TL2 dowel (self-assembly)
Cam & TL2 dowel (factory pre-inserted)
Quickloc
Fully assembled demonstrator
Comparative CAF scores
to assemble a hand held
demonstrator
CAF=Consumer Assembly Friendliness
Titus CAF formula provides a
comparative measure for customer
satisfaction. By using it manufacturers
are able to evaluate their products
internally or against those of their
competitors. While offering
consumers easier and
faster assembly, there are obvious
advantages also for furniture
manufacturers – buying, counting,
bagging and stocking of fi ttings can
be greatly reduced.
6
System Features
The Hi-Lo™ carcase construction
screw (CCS) offers a strong, tolerant
and cost effective connection with
minimal panel preparation.
The combination effect of the elements
of a Hi-Lo™ screw means
· A greater differential between drive
torque and strip torque in fi brous and
particle materials to ensure a reliable
and repeatable fi xing
· Hi-Lo™ threads provide minimum
bursting forces
· ‘Hi’ thread gives low bursting
component force from the sharp 30
degree angle thread
· ‘Lo’ thread at 60 degree angle uses
the vertical force component to press
fi brous and particle components of
panels onto the ‘Hi’ thread and are
contained by their greater height
· The very small shank on a
Hi-Lo™ screw means less material
displacement than conventional
threads and enables minimum
or partial drilling of pilot holes for
speedier panel processing
Hi-Lo™ carcase construction screw
System 1Fittings for Rigid Assembly Systems
· Used with Titus Hi-Lo™ screws
· Titus barrel nuts provide maximum
strip torque for reasonable drive
torque
· Capable of multiple reconnection
repeatability
Barrel nut (plastic)
· Available in multiple colours
· All recess and head types offered
· High quality engineering polymers
used in their construction
· Uniformity of holding with good
tolerance
· Wide range of application and use
conditions
Cover caps
· Zinc diecast for precision
· Titus Double locking carcase screw
makes an almost invisible connection
· Collar under the head to pull panels
together
· 2nd ‘lower’ thread pulls against a
‘faster’ thread to provide maximum
connection force and prevents
overdriving of fastener
· Almost invisible in position
· Head can be ‘fastcapped’ or fi lled
Double locking carcase screw
7
Con
nect
ors
42
00180 > 885
min 30
Ø7/7.5
15/16Ø5
Item number Zin
c
1000 Pcs
System 1Fittings for Rigid Assembly SystemsDouble Locking Carcase
Screw
Screw6x42
Made of zinc
· High performance from widely spaced primary
thread
· Finer secondary thread provides additional
holding power and positive stop (no override)
· Increased support for vertical panel is gained
from the funnel head with collar at its base
· One-piece fitting
1. Insert screw to shoulder in
face board
2. Screw into Ø5mm hole
3. Board joint pulled up by
collar on screw
4. Board locked in place by
screw
Technical andmounting details
8
00062 >
00068 >
00071 >
06074 >
00077 >
00172 >
06077 >
06080 >
25
28
33
38
45
55
50
50
01020 >
01042 >
852
852
852
852
852
852
852
852
877
877
01056 >
L
Ø7.6
L
835
Ø3
9 min
Ø5
Ø12x11
B
7.5/8
877
4
4
4
4
4
4
4
5
835
20
23
28
33
40
50
45
45
A1
Item number Bla
ck
Pho
spha
te
Barrel nut
10000 Pcs Made of plastic
Whi
te
Tota
l Len
gth
50000 Pcs
System 1Fittings for Rigid Assembly SystemsHi-Lo™ Screw
and Barrel Nut
Hi-Lo™ screw
Made of steel
Made of plastic
Screw cap
· Hi-Lo™ screws have a twin thread for faster insertion
· ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull out in chipboard
· Funnel head design means no countersinking
· Steel is case hardened for extra strength
Technical andmounting details S
crew
dia
met
er
Other colours on request
Other colours on request
pozi, philips
hexagon
3000 Pcs (00172, 06077, 06080)
4000 Pcs (00077, 06074)
7000 Pcs (00071)
9000 Pcs (00068)
10000 Pcs (00062)
9
Con
nect
ors
02077 > 877
10
10
17
Ø4.5
32
17
Item number Dar
k b
row
n
Lig
ht b
row
n
Ivo
ry
Whi
te
System 2Fittings for Face-Boring Applications · Range of fixing blocks for multiple applications
· Face drilling only required
· Durable plastic material is flexible providing
greater holding power
· Choose screw fastening or hammer insertion
2000 Pcs Made of plastic
Technical andmounting details
10
System Features
Titus System 3 is a two component
rigid face and edge drilled fastening
with half turn to fasten. System 3 offers
almost full concealment and wide
tolerances in use.
· Automatic or in-factory placement
· Pre-location pin ensures ease of
assembly
· Less than one turn of a screwdriver
to fasten
· Shelf edge installation of pin means
maximum shelf cut size tolerance
· Can be used on 12mm shelf panels
· No loose parts for maximum
convenience in RTA
· Drawer front fi xing, cabinet
construction
System 3Fittings for Face and Edge Boring
11
Con
nect
ors
03118 >
03121 >
03181 >
03090 >
831
831
03165 > 883
D2D
12.5
11
35
25 883
03150 > 831
881
877
C
3.75
3
Item number Dar
k b
row
n
Zin
c p
late
d
Screw dowel Ø5
Dri
lling
dia
met
er
for
do
wel
thr
ead
2500 Pcs
System 3Fittings for Face and Edge BoringConcealed Housing
Housingassembly
Made of plastic or zinc, plastic
Screw dowel Ø3
· One turn locking system reduces assembly time,
both in the factory and home
· Pre-assembly feature for consumer convenience
· Choice of dowels to suit drilling
· Hi-Lo screw feature for faster insertion
1000 Pcs Made of steel
X, Y - depends on board thickness
15000 Pcs
Cover cap
Yello
wp
assi
vate
Whi
te
Other colours on request
Made of plastic
Dri
lling
dep
th
Dri
lling
leng
th
for
do
wel
X, Y - depends on board thickness
X, Y - depends on board thickness
Technical andmounting details
Made of steel1000 Pcs (03090)
4000 Pcs (03181)
X-Y
+7
Ø25 x D
(Y=
9.5
MA
X)
YX
(Y=
9.5
MA
X)
Ø5 x 30
X-Y
+7 Y
X
(Y=
9.5
MA
X)
ØD2 x C
X-Y
+7 Y
X
12
System Features
Cost effective one piece fi ttings with
face boring benefi ts
· Flush and block components
· Face-boring only
· Good tolerances
· One piece connectors
· Angledriv versions fastening with
maximum driving power and fl exibility
· Quickloc™ versions need only one
turn to tighten for fast assembly
· Foolproof consumer home insertion
System 4Fittings for Face-Boring Only
Quickloc™
Quickloc™ Assembly
The integrated housing and dowel
make Quickloc™ the most user-friendly
and tolerant product available.
· High degree of drilling tolerance
· Push-in design
· Tool-free insertion
· Integrated expanding housing and
dowel provide consistently stronger
joints
· ‘Klix’ locking system
3. Tighten in less than one turn
1. Press Quickloc into the face board 2. Assemble the panels
13
Con
nect
ors
835
06802 >
831
835 831 871
9.5 Ø8
06803 >
9.5
4.510
Ø20
Ø8
10
Ø1010.5 A1 115
12
Ø25
13
Ø10
Dar
k b
row
n
Tan
System 4Quickloc™One Piece Expanding
Connector
Quickloc Ø20 flanged
Item number Bla
ck
· An innovative, one-piece connector, capable of hand insertion
· Is highly tolerant and tightens in less than one turn
· Is a face-bored product
· Offers a high degree of drilling tolerance and is the only
connector of its type to provide pull-up of cabinet panels when
tightened
Technical andmounting details
Made of zinc, plastic
Made of zinc, plastic
2500 Pcs
1500 Pcs
Quickloc Ø25 flanged
14
00022 >
02190 > 877831
885
835
27.5
Flusbloc™assembly
System 4Fittings for Face-Boring OnlyFlushbloc™ / Flushfix™
Made of zinc
Angeldrivscrew for use with Flushfi x™
· The Angeldriv screw provides high level of tolerance
· Face drilling only required
· Corner joint and shelf fixing options
2500 Pcs Made of zinc, plastic
Other colours on request
Item number Whi
te
Zin
c
Bla
ck fl at head
Technical andmounting details
4000 Pcs (00022)
Dar
k b
row
n
Ø5x13
Ø25x1112
4.5
Ø5x13
Ø25x1112
4.5
15
14
16 17
16 17
13
Con
nect
ors
835
D
11 877
835 877
Ø5 x 10.5Ø10 x D
6
11
Ø5 x 13Ø8 x D
6
11
831
11
System 4Fittings for Face-Boring OnlyMinibloc™ / Twinbloc™
· One-piece connector range
· Face drilling only required
· Easy to use, foolproof home insertion
· Angeldriv screw tolerates good levels of
inaccurate drilling increasing consumer
confidence
* 02120 >
* assembly with screw
Minibloc 02141 >
* assembly with screw
Minibloc
Made of zinc, plastic
Made of zinc, plastic
Other colours on request
Item number Bla
ck
Whi
te
Dar
k b
row
n
Dri
lling
dep
th
Technical andmounting details
3000 Pcs (02120)
2500 Pcs (02107, 02101)
3000 Pcs
Angledriv screw > see page 14
16
System 5Cams and Dowels
System Features
Titus System 5 is a comprehensive
range of cam and dowel connecting
fi ttings with Klix and Quickfi t features
for all cabinet applications:
panel-to-panel, panel-to-hollow profi le,
back-to-back
Fittings are made from zinc, steel
and high grade pastic.
Dowels
• Quickfi t TL2, TL4 dowels a unique solution forfactory pre-insertion,high level of drilling tolerances
• Quickfi t dowelsquick hand insertion, easy assembly
• Diecast dowels (zinc)precise manufacturing, optimal shape and design
• Combi dowels (zinc and steel) high precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance
Titus Klix locking system enusres the
engagement of the interlocking teeth
on cam and dowel providing:
· vibration-proof joint
· rigid construction that will not loosen
is service or transit
Titus Klix™
The most advanced cam and dowel range
Quickfi t dowel
1Second
Single start thread
Standard dowel
7Seconds
Twin start thread
Combi dowel
4Seconds
Dowel insertion time comparison
Linear cam profi le assures smooth, fi rm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confi dence in use while improving furniture quality.