4-570-616-13(1) Personal Audio System Listening to Music over Your Wi-Fi Network SRS-X77 Wi-Fi Startup Guide Connecting the unit to your Wi-Fi network Xperia iPhone WPS Required items: Xperia™ or other Android smartphone, wireless router Required items: iPhone/iPad/iPod touch, wireless router Required item: Wireless router with WPS (AOSS) button Use an Android smartphone such as an Xperia in which SongPal (free app) is installed to configure Wi-Fi settings of the unit. This method requires a Wi-Fi connection of the smartphone and a BLUETOOTH connection between the smartphone and the unit. The Wi-Fi setting information is sent from the smartphone to the unit via BLUETOOTH. • Some wireless routers have multiple SSIDs. Connect the unit and your Android smartphone to the same SSID. Use an iPhone in which SongPal (free app) is installed to configure Wi-Fi settings of the unit. This method requires a Wi-Fi connection of the iPhone and a BLUETOOTH connection between the iPhone and the unit. The Wi-Fi setting information is sent from the iPhone to the unit via BLUETOOTH. • Some wireless routers have multiple SSIDs. Connect the unit and your iPhone to the same SSID. Configure Wi-Fi settings of the unit with a push of each WPS (AOSS) button on the wireless router and the unit. • To check if your wireless router is compatible with WPS (Wi-Fi Protected Setup™), refer to the operating instructions of your router. 1 Preliminary steps: Connect your smartphone to your Wi-Fi network. Record the SSID and password of your router that your smartphone is connecting to in the following spaces. For details, refer to the operating instructions of your router. SSID: Password: Install SongPal on your smartphone. Search for SongPal on Google Play™ 1 Preliminary steps: Confirm that your iPhone is connected to your Wi-Fi network. Install SongPal on your iPhone. Search for SongPal on the App Store 1 Place the unit close to your wireless router. 2 Press the / (on/standby) button to turn on the unit. Flashing Slow flashing The / (on/standby) indicator lights up in green. Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin. 2 Press the / (on/standby) button to turn on the unit. Flashing Slow flashing The / (on/standby) indicator lights up in green. Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin. 2 Press the / (on/standby) button to turn on the unit. Flashing Slow flashing The / (on/standby) indicator lights up in green. Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin. 3 Press and hold the WPS button of the unit until it beeps (about 2 seconds). The WPS button is on the rear of the unit. 4 Within 90 seconds, press the WPS button* 3 of the router. Depending on the wireless router, press and hold the WPS button for a few seconds. For details, refer to the operating instructions of your router. * 3 The WPS button may be called “AOSS button” depending on the wireless router. 4 Check that the (BLUETOOTH) indicator is lit. Flashing Lit When a BLUETOOTH connection is established, the (BLUETOOTH) indicator stops flashing and stays lit. 4 Check that the (BLUETOOTH) indicator is lit. Flashing Lit When a BLUETOOTH connection is established, the (BLUETOOTH) indicator stops flashing and stays lit. 5 Check that the LINK indicator lights up in orange. Flashing Lit When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute. When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2. 5 Configure Wi-Fi settings following the SongPal instructions. If password entry is required on the display, select the SSID and enter the password recorded in step 1 - . The screen on the right is displayed. 5 Configure Wi-Fi settings following the SongPal instructions. 6 Check that the LINK indicator lights up in orange. Flashing Lit When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute. When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2. 6 Check that the LINK indicator lights up in orange. Flashing Lit When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute. When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2. 3 Make a BLUETOOTH connection between the unit and iPhone. 3 Make a BLUETOOTH connection between the unit and smartphone. If your smartphone does not support the NFC function, see to on the right. Tap and start up [SongPal] on your smartphone. Follow the on-screen instructions. Touch the N-Mark on the unit with the smartphone. Touch and hold until the smartphone responds. Pairing is completed in about 1 minute. Tap the (BLUETOOTH) PAIRING button of the unit once. The (BLUETOOTH) indicator begins to flash quickly.* 2 * 2 The first time you tap the (BLUETOOTH) PAIRING button after purchasing this unit, the (BLUETOOTH) indicator flashes quickly. To pair with another device, tap and hold the (BLUETOOTH) PAIRING button until it beeps. Search for the unit on the iPhone. Tap [Settings] [Bluetooth]. Turn on BLUETOOTH. Tap [SRS-X77]. Non-NFC compatible smartphone Tap [SRS-X77] on your smartphone. * 1 The first time you tap the (BLUETOOTH) PAIRING button after purchasing this unit, the (BLUETOOTH) indicator flashes quickly. To pair with another device, tap and hold the (BLUETOOTH) PAIRING button until it beeps. Set the BLUETOOTH function of the smartphone to on. Tap and start up SongPal, then [Open the Bluetooth setting screen]. Tap the (BLUETOOTH) PAIRING button of the unit once. The (BLUETOOTH) indicator begins to flash quickly.* 1 If the Wi-Fi connection fails You can use a PC browser to configure Wi-Fi settings of the unit. Connect the unit to your PC using a commercially-available network (LAN) cable. For details, refer to the Operating Instructions, “Listening to music via a Wi-Fi network”. This document introduces how to play music after connecting this unit to your Wi-Fi network. A Wi-Fi network enables you to easily enjoy music stored in wireless devices in your home, such as a PC or smartphone/iPhone. For other connection or listening methods, refer to Help Guide (indicated on the right). First Set up the unit as follows. Make sure that a LAN cable is not connected. A wired and wireless connection cannot be used at the same time. Push 3 Set the antenna in the upright position. 2 Plug the unit to an AC outlet with the AC adaptor to charge. 1 Set the NETWORK OFF/ON switch to ON. Choose your device or software to play music, then go to “ Listening to music with the unit” overleaf. PC (Media Go) Set the music stored in a PC to share and listen to it by using Media Go. PC (iTunes) PC (Windows Media Player) Smartphone (SongPal app) Listen to music in your smartphone/iPhone/iPad/iPod touch by operating SongPal. Xperia (Music app) iPhone/iPad/iPod touch Choose a Wi-Fi connection method depending on your device, then go to “ Connecting the unit to your Wi-Fi network” below. Xperia Use an Android smartphone in which SongPal (free app) is installed to configure the Wi-Fi settings of the unit. iPhone Use an iPhone/iPad/iPod touch in which SongPal (free app) is installed to configure the Wi-Fi settings of the unit. WPS Use a wireless router with a WPS (AOSS) button to configure the Wi-Fi settings of the unit with a push of the button. PC Configure the Wi-Fi settings using a browser of a PC. Refer to the Operating Instructions of the separate document, “Listening to music via a Wi-Fi network”. Documents provided Wi-Fi Startup Guide (this document) Explains how to listen to music stored in your PC or other device over your Wi-Fi network. Operating Instructions (separate document) Explains important safety information, BLUETOOTH connection method, troubleshooting, etc. Help Guide (web document for a PC/smartphone) Explains details about the unit; network and BLUETOOTH connection method with various devices, etc. http://rd1.sony.net/help/speaker/srs-x77/h_zz/ If [Share Wi-Fi settings?] is displayed, tap [Allow]. The screen on the right is displayed. Tap and start up [SongPal] on your iPhone. Follow the on-screen instructions. When the screen on the right is displayed, tap [OK]. See overleaf to play back See overleaf to play back See overleaf to play back Continued: “ Listening to music with the unit” overleaf
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
4-570-616-13(1)
Personal Audio System
Listening to Music over Your Wi-Fi Network
SRS-X77
Wi-Fi Startup Guide
Connecting the unit to your Wi-Fi networkXperia
iPhone
WPS
Required items: Xperia™ or other Android smartphone, wireless router
Required items: iPhone/iPad/iPod touch, wireless router
Required item: Wireless router with WPS (AOSS) button
Use an Android smartphone such as an Xperia in which SongPal (free app) is installed to configure Wi-Fi settings of the unit. This method requires a Wi-Fi connection of the smartphone and a BLUETOOTH connection between the smartphone and the unit. The Wi-Fi setting information is sent from the smartphone to the unit via BLUETOOTH.
• Some wireless routers have multiple SSIDs. Connect the unit and your Android smartphone to the same SSID.
Use an iPhone in which SongPal (free app) is installed to configure Wi-Fi settings of the unit. This method requires a Wi-Fi connection of the iPhone and a BLUETOOTH connection between the iPhone and the unit. The Wi-Fi setting information is sent from the iPhone to the unit via BLUETOOTH.
• Some wireless routers have multiple SSIDs. Connect the unit and your iPhone to the same SSID.
Configure Wi-Fi settings of the unit with a push of each WPS (AOSS) button on the wireless router and the unit.
• To check if your wireless router is compatible with WPS (Wi-Fi Protected Setup™), refer to the operating instructions of your router.
1 Preliminary steps:
Connect your smartphone to your Wi-Fi network.
Record the SSID and password of your router that your smartphone is connecting to in the following spaces.For details, refer to the operating instructions of your router.
SSID:
Password:
Install SongPal on your smartphone.
Search for SongPal on Google Play™
1 Preliminary steps:
Confirm that your iPhone is connected to your Wi-Fi network.
Install SongPal on your iPhone.
Search for SongPal on the App Store
1 Place the unit close to your wireless router.
2 Press the / (on/standby) button to turn on the unit.
Flashing Slow flashing
The / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin.
2 Press the / (on/standby) button to turn on the unit.
Flashing Slow flashing
The / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin.
2 Press the / (on/standby) button to turn on the unit.
Flashing Slow flashing
The / (on/standby) indicator lights up in green.Go to the next step when the LINK indicator begins to flash slowly (once per 3 seconds). In some cases, this slow flashing may take about 4 or 5 minutes to begin.
3 Press and hold the WPS button of the unit until it beeps (about 2 seconds).
The WPS button is on the rear of the unit.
4 Within 90 seconds, press the WPS button*3 of the router.
Depending on the wireless router, press and hold the WPS button for a few seconds. For details, refer to the operating instructions of your router.
*3 The WPS button may be called “AOSS button” depending on the wireless router.
4 Check that the (BLUETOOTH) indicator is lit.
Flashing Lit
When a BLUETOOTH connection is established, the (BLUETOOTH) indicator stops flashing and stays lit.
4 Check that the (BLUETOOTH) indicator is lit.
Flashing Lit
When a BLUETOOTH connection is established, the (BLUETOOTH) indicator stops flashing and stays lit.
5 Check that the LINK indicator lights up in orange.
Flashing Lit
When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2.
5 Configure Wi-Fi settings following the SongPal instructions.
If password entry is required on the display, select the SSID and enter the password recorded in step 1 - .
The screen on the right is displayed.
5 Configure Wi-Fi settings following the SongPal instructions.
6 Check that the LINK indicator lights up in orange.
Flashing Lit
When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2.
6 Check that the LINK indicator lights up in orange.
Flashing Lit
When the indicator stays lit, the Wi-Fi connection is established. Depending on the environment, it may take more than 1 minute.
When the Wi-Fi connection fails, the LINK indicator flashes in red. In this case, repeat the procedure from step 2.
3 Make a BLUETOOTH connection between the unit and iPhone.
3 Make a BLUETOOTH connection between the unit and smartphone.If your smartphone does not support the NFC function, see to on the right.
Tap and start up [SongPal] on your smartphone.Follow the on-screen instructions.
Touch the N-Mark on the unit with the smartphone.
Touch and hold until the smartphone responds.
Pairing is completed in about 1 minute.
Tap the (BLUETOOTH) PAIRING button of the unit once.
The (BLUETOOTH) indicator begins to flash quickly.*2
*2 The first time you tap the (BLUETOOTH) PAIRING button after purchasing this unit, the (BLUETOOTH) indicator flashes quickly. To pair with another device, tap and hold the (BLUETOOTH) PAIRING button until it beeps.
Search for the unit on the iPhone.
Tap [Settings] [Bluetooth].
Turn on BLUETOOTH.
Tap [SRS-X77].
Non-NFC compatible smartphone
Tap [SRS-X77] on your smartphone.
*1 The first time you tap the (BLUETOOTH) PAIRING button after purchasing this unit, the (BLUETOOTH) indicator flashes quickly. To pair with another device, tap and hold the (BLUETOOTH) PAIRING button until it beeps.
Set the BLUETOOTH function of the smartphone to on.
Tap and start up SongPal, then [Open the Bluetooth setting screen].
Tap the (BLUETOOTH) PAIRING button of the unit once.
The (BLUETOOTH) indicator begins to flash quickly.*1
If the Wi-Fi connection failsYou can use a PC browser to configure Wi-Fi settings of the unit. Connect the unit to your PC using a commercially-available network (LAN) cable.
For details, refer to the Operating Instructions, “Listening to music via a Wi-Fi network”.
This document introduces how to play music after connecting this unit to your Wi-Fi network.A Wi-Fi network enables you to easily enjoy music stored in wireless devices in your home, such as a PC or smartphone/iPhone. For other connection or listening methods, refer to Help Guide (indicated on the right).
First Set up the unit as follows.
Make sure that a LAN cable is not connected. A wired and wireless connection cannot be used at the same time.
Push
3 Set the antenna in the upright position.
2 Plug the unit to an AC outlet with the AC adaptor to charge.
1 Set the NETWORK OFF/ON switch to ON.
Choose your device or software to play music, then go to “ Listening to music with the unit” overleaf.
PC (Media Go)Set the music stored in a PC to share and listen to it by using Media Go.
PC (iTunes)
PC (Windows Media Player)
Smartphone (SongPal app)Listen to music in your smartphone/iPhone/iPad/iPod touch by operating SongPal.
Xperia (Music app)
iPhone/iPad/iPod touch
Choose a Wi-Fi connection method depending on your device, then go to “ Connecting the unit to your Wi-Fi network” below.
Xperia Use an Android smartphone in which SongPal (free app) is installed to configure the Wi-Fi settings of the unit.
iPhone Use an iPhone/iPad/iPod touch in which SongPal (free app) is installed to configure the Wi-Fi settings of the unit.
WPS Use a wireless router with a WPS (AOSS) button to configure the Wi-Fi settings of the unit with a push of the button.
PCConfigure the Wi-Fi settings using a browser of a PC. Refer to the Operating Instructions of the separate document, “Listening to music via a Wi-Fi network”.
Documents provided
Wi-Fi Startup Guide (this document)Explains how to listen to music stored in your PC or other device over your Wi-Fi network.
Operating Instructions (separate document)Explains important safety information, BLUETOOTH connection method, troubleshooting, etc.
Help Guide (web document for a PC/smartphone)Explains details about the unit; network and BLUETOOTH connection method with various devices, etc.
http://rd1.sony.net/help/speaker/srs-x77/h_zz/
If [Share Wi-Fi settings?] is displayed, tap [Allow].
The screen on the right is displayed.
Tap and start up [SongPal] on your iPhone.Follow the on-screen instructions.
When the screen on the right is displayed, tap [OK].
See overleaf to play back
See overleaf to play back
See overleaf to play backContinued: “ Listening to music with the unit” overleaf
PC (Media Go)
PC (iTunes)
Required item: Media Go installed PC
Required item: iTunes installed PC
You can listen to music stored in your PC with the unit by using the software Media Go.
• Go to the following URL beforehand, and install or update to the latest version of Media Go (free software) on your PC. For customers in Europe: http://www.sony.eu/support For customers in the U.S.A.: http://esupport.sony.com/US For customers in Canada: http://esupport.sony.com/CA/ For customers in other countries/regions: http://www.sony-asia.com/section/support
You can listen to iTunes music on your PC with the unit using AirPlay.
• Update iTunes to the latest version beforehand.
1 Connect the unit and PC to your Wi-Fi network.
Connect the unit and PC to the same SSID of your router.See overleaf for connecting the unit to your Wi-Fi network, and make sure the LINK indicator of the unit lights up in orange.
1 Connect the unit and PC to your Wi-Fi network.
Connect the unit and PC to the same SSID of your router.See overleaf for connecting the unit to your Wi-Fi network, and make sure the LINK indicator of the unit lights up in orange.
2 Play music by operating iTunes on your PC.
2 Tap the NETWORK button of the unit.
The NETWORK indicator lights up in white, and the unit switches to NETWORK mode.
Select (Throw) from the bottom of the Media Go window.
Select [SRS-X77] on the Throw menu of Media Go. Select a song to play and adjust the volume.
3 Prepare Media Go.
Start up [Media Go] on your PC.
Select [Preferences...] from the [Tools] menu.
Preferences
5 Play music by operating Media Go on your PC.
4 Set Media Go on your PC as the server.
Select [Media Sharing], then check [Library name].[Library name] can be changed to an arbitrary name.
Media Sharing
Make sure that a check mark is in all three items of [Media Sharing].
Library name
After confirming the screen, select [OK].
Listening to music with the unit
Smartphone (SongPal app) Required item: SongPal installed smartphone/iPhone/iPad/iPod touch
You can listen to music stored in your smartphone/iPhone with SongPal (free app).
• For more details about SongPal, refer to the Operating Instructions, “About SongPal”.
1 Connect the unit and smartphone/iPhone to your Wi-Fi network.
Connect the unit and smartphone/iPhone to the same SSID of your router.See overleaf for connecting the unit to your Wi-Fi network, and make sure the LINK indicator of the unit lights up in orange.
2 Set the unit on SongPal.
Install SongPal on your smartphone/iPhone.If SongPal is already installed, skip this procedure and go to .
Search for SongPal on Google Play or the App Store.
Tap and start up [SongPal].Follow the on-screen instructions.
When the screen on the right is displayed, tap [SRS-X77].
3 Play music in your smartphone/iPhone by operating SongPal.
Tap your smartphone/iPhone.
Select a song to play and adjust the volume.
Xperia (Music app) Required item: Music app-compatible Xperia
You can listen to music stored on your Xperia by operating the Music app.
• This function is available when you have an Xperia with the Music (or WALKMAN®) app pre-installed.
• Update the Android OS of your Xperia to the latest version beforehand.
• Your Xperia may need to disable [Auto-select wireless option] of [Throw settings]. For details, refer to the User guide of Xperia.
1 Connect the unit and Xperia to your Wi-Fi network.
Connect the unit and Xperia to the same SSID of your router.See overleaf for connecting the unit to your Wi-Fi network, and make sure the LINK indicator of the unit lights up in orange.
Tap and start up ([Music]) on your Xperia.
Tap , then tap [SRS-X77].
2 Play music in your Xperia by operating the Music app.
Play music and adjust the volume.
Select [SRS-X77] on the AirPlay menu of iTunes.
Select a song to play and adjust the volume.
iPhone/iPad/iPod touch Required item: iPhone/iPad/iPod touch
You can listen to music stored in your iPhone/iPad/iPod touch using AirPlay.
• Update the iPhone/iPad/iPod touch to the latest version beforehand.
• The screen illustrations are examples using iOS 8.
1 Connect the unit and iPhone/iPad/iPod touch to your Wi-Fi network.
Connect the unit and iPhone/iPad/iPod touch to the same SSID of your router.See overleaf for connecting the unit to your Wi-Fi network, and make sure the LINK indicator of the unit lights up in orange.
Swipe up the screen to display the Control Center.
Tap (AirPlay).
2 Play music by operating iPhone/iPad/iPod touch.
Tap [SRS-X77].
Play music and adjust the volume.
PC (Windows Media Player)
You can listen to music using Windows Media Player on the PC with the unit.
• Refer to the Help Guide for more details. http://rd1.sony.net/help/speaker/srs-x77/h_zz/
SongPal Link:Enjoy music in any room via Wi-Fi.You can listen to your favorite music stored in your PCs or mobile phones and furthermore, music from streaming services, in different rooms with ultimate sound quality.
Use the SongPal app installed on your smartphone/iPhone to control the function.If you use multiple devices that are compatible with the SongPal Link function, all devices must be connected to the same Wi-Fi network. For more details, refer to the Help Guide listed on the right, or the Wi-Fi Startup Guide supplied with each device.
For more information about the unit, consult other documentsOperating Instructions (separate document) Help Guide (web document for a PC/smartphone)
• Safety information
• Parts and controls
• Wi-Fi network connection using PC
• Connection/playback method with BLUETOOTH or other devices
• About the NFC function
• Troubleshooting
• Specifications etc.
• Wi-Fi network connection details
• Linkage with SongPal app
• Network connection and playback method with each OS/device
• BLUETOOTH connection and playback method with various devices
• Software update etc.
Help Guide URL:http://rd1.sony.net/help/speaker/srs-x77/h_zz/
Start iTunes on your PC.
Select (AirPlay) on the iTunes window.
Communication fees may be charged for downloading the app or browsing the Help Guide. The design and displays of the app may change without notice.
©2015 Sony Corporation Printed in China
Music stored in your PC Music stored in your smartphone/iPhone
Music is played back.
Music is played back.
Music is played back.
Music is played back.
Music is played back.
Related Documents
![2 Pilih [Wi-Fi function (Fungsi Wi-Fi)].](https://static.cupdf.com/doc/110x72/587653b01a28ab135e8b9be3/2-pilih-wi-fi-function-fungsi-wi-fi.jpg)