Connecting and Configuring Clickers. InterWrite PRS - Clicker 2-line LCD Display See data entered Confirmation answer received Variety of question types.

Connecting and Configuring Clickers

InterWrite PRS - Clicker

2-line LCD Display• See data entered• Confirmation answer received

Variety of question types • Multiple choice• True/False • Numeric

• Decimal, +/-

• Rank order• Short Answer

Scroll and Menu Buttons• Self-paced, homework modes• Clicker setup*Runs on 3 AAA batteries

On/Off Switch

To connect the clickers…

*Do not turn your clicker on, until your instructor’s computer isDone searching for a channel.

Step 1:

Scanning classesPlease wait

1. Turn on clickerto start scanning.

Step 2:

Scanning classesPlease wait

Quick Jump Code

Look on your instructor’s computer for a letter or numberin brackets. Press the number or letter on your clicker.

Step 3a:

Once your class is listed, press the green send button to join the class.

Scanning found 1Your Class’s Name

Joining Class

*If your class does not show on the screen, use the scroll buttons to the left of the send button.

Step 3b:

*Enter the ID as specified by your instructor.

Then press the green send button.

ID: 3567909Your Class’s Name

3c: Resetting the Student ID

Setup MenuID:

1.Press the * button.2.Press the up arrowUntil you get to the IDScreen.3.Press the green send button

4.Put in your ID, and press the green send button again.

ID: 123456Enter Student ID

5. Turn you clicker off, and on and then re-join your instructor’s class.

Step 4:

Once you get to this screen, you are ready to answer questions.

*Your clicker may fall asleep, to wake it from sleep mode, just press any of the number or letter keys. Do not switch it on or off.

ANS:Your Class’s Name

To Respond to Questions

ANS:Your Class’s Name

ANS: A

Received

ANS: A

Enter Answer

1. Enter the answer and press send.

2. Once received you can answer other questions.

*If your clicker fell asleep, press any of the buttons to wake it up. But do not switch it on or off.