Conical Connection Surgical Kit ®
MT-RDL30
42
Long driver for 0.05 inch hex.
MP-WC51T Rev.1 May 2017
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and Medical Device Directive 93/42/EEC. MIS
products are CE marked.
Surgical Kit Content:
CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm
5
MT-PDM24Position drill mill Ø2.4mm
2
3
MT-PD440Position drill Ø4mm
MT-SMD10Spade marking drill
1
4
Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408
CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP
25
CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP
19
CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP
23
24
CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP
CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP
26
CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP
20
CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP
22
CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP
21
6
CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm
CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm
7
8
CT-P2416Pilot drill Ø2.4/2.0 height 16mm
9
CT-BTC24Body try in 2.40mm for tapered impl. procedure
10
CT-BTC30Body try in 3mm for tapered impl. procedure
11CT-BTC35Body try in 3.50mm for tapered impl. procedure
12
CT-BTC40Body try in 4mm for tapered impl. procedure
Conical Connection Surgical Kit
®
3
1
2
4
5
6
7
8
9
9
9
10 11 12
13 14 15
16 17 18
19 27
23 31
35
21 29
25 33
37
20 28
24 32
36
22 30
26 34
3839 40 41 42 43
44
45
13
CT-TDC30Step drill Ø3/2.4mm, external irrigation
14
CT-TDC35Step drill Ø3.5/3mm, external irrigation
15
CT-TDC40Step drill Ø4/3.5mm, external irrigation
MT-CSN33Countersink for narrow platform implant system
16
MT-GDN33Countersink for standard platform implant system
17
MT-GDN50Countersink for wide platform implant system
18
CT-NSR10
30
Short ratchet insertion tool for C1 implant, coni. con., narrow platform
28CT-NLR10Long ratchet insertion tool for C1 implant, coni. con., narrow platform
27CT-NLI10Long insertion tool for C1 implant, coni. con., narrow platform
29
CT-NSI10Short insertion tool for C1 implant, coni. con., narrow platform
31
CT-SLI10Long insertion tool for C1 implant, coni. con., standard platform
32
CT-SLR10Long ratchet insertion tool for C1 implant, coni. con., standard platform
34
CT-SSR10Short ratchet insertion tool for C1 implant, coni. con., standard platform
33
CT-SSI10Short insertion tool for C1 implant, coni. con., standard platform
CT-WSI10
37
Short insertion tool for C1 implant, coni. con., wide platform
35
CT-WLI10Long insertion tool for C1 implant, coni. con., wide platform
36
CT-WLR10Long ratchet insertion tool for C1 implant, coni. con., wide platform
45
MT-RT070Torque wrench for implant placement
The tools shown are in proportion to one another
Key to code used:
Non sterile
ManufacturerBatch Code
Catalog Number
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
38
CT-WSR10Short ratchet insertion tool for C1 implant, coni. con., wide platform
MT-BTI20
44
Implant site depth probe
43
MT-RDS30Short driver for 0.05 inch hex.
41
MT-DE001Drill extender
39
MT-RE160Int. connection abutment extractor, narrow platform
40
MT-RE172Int. connection abutment extractor
MT-RDL30
42
Long driver for 0.05 inch hex.
MP-WC51T Rev.1 May 2017
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and Medical Device Directive 93/42/EEC. MIS
products are CE marked.
Surgical Kit Content:
CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm
5
MT-PDM24Position drill mill Ø2.4mm
2
3
MT-PD440Position drill Ø4mm
MT-SMD10Spade marking drill
1
4
Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408
CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP
25
CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP
19
CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP
23
24
CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP
CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP
26
CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP
20
CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP
22
CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP
21
6
CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm
CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm
7
8
CT-P2416Pilot drill Ø2.4/2.0 height 16mm
9
CT-BTC24Body try in 2.40mm for tapered impl. procedure
10
CT-BTC30Body try in 3mm for tapered impl. procedure
11CT-BTC35Body try in 3.50mm for tapered impl. procedure
12
CT-BTC40Body try in 4mm for tapered impl. procedure
Conical Connection Surgical Kit
®
3
1
2
4
5
6
7
8
9
9
9
10 11 12
13 14 15
16 17 18
19 27
23 31
35
21 29
25 33
37
20 28
24 32
36
22 30
26 34
3839 40 41 42 43
44
45
13
CT-TDC30Step drill Ø3/2.4mm, external irrigation
14
CT-TDC35Step drill Ø3.5/3mm, external irrigation
15
CT-TDC40Step drill Ø4/3.5mm, external irrigation
MT-CSN33Countersink for narrow platform implant system
16
MT-GDN33Countersink for standard platform implant system
17
MT-GDN50Countersink for wide platform implant system
18
CT-NSR10
30
Short ratchet insertion tool for C1 implant, coni. con., narrow platform
28CT-NLR10Long ratchet insertion tool for C1 implant, coni. con., narrow platform
27CT-NLI10Long insertion tool for C1 implant, coni. con., narrow platform
29
CT-NSI10Short insertion tool for C1 implant, coni. con., narrow platform
31
CT-SLI10Long insertion tool for C1 implant, coni. con., standard platform
32
CT-SLR10Long ratchet insertion tool for C1 implant, coni. con., standard platform
34
CT-SSR10Short ratchet insertion tool for C1 implant, coni. con., standard platform
33
CT-SSI10Short insertion tool for C1 implant, coni. con., standard platform
CT-WSI10
37
Short insertion tool for C1 implant, coni. con., wide platform
35
CT-WLI10Long insertion tool for C1 implant, coni. con., wide platform
36
CT-WLR10Long ratchet insertion tool for C1 implant, coni. con., wide platform
45
MT-RT070Torque wrench for implant placement
The tools shown are in proportion to one another
Key to code used:
Non sterile
ManufacturerBatch Code
Catalog Number
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
38
CT-WSR10Short ratchet insertion tool for C1 implant, coni. con., wide platform
MT-BTI20
44
Implant site depth probe
43
MT-RDS30Short driver for 0.05 inch hex.
41
MT-DE001Drill extender
39
MT-RE160Int. connection abutment extractor, narrow platform
40
MT-RE172Int. connection abutment extractor
MT-RDL30
42
Long driver for 0.05 inch hex.
MP-WC51T Rev.1 May 2017
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and Medical Device Directive 93/42/EEC. MIS
products are CE marked.
Surgical Kit Content:
CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm
5
MT-PDM24Position drill mill Ø2.4mm
2
3
MT-PD440Position drill Ø4mm
MT-SMD10Spade marking drill
1
4
Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408
CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP
25
CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP
19
CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP
23
24
CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP
CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP
26
CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP
20
CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP
22
CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP
21
6
CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm
CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm
7
8
CT-P2416Pilot drill Ø2.4/2.0 height 16mm
9
CT-BTC24Body try in 2.40mm for tapered impl. procedure
10
CT-BTC30Body try in 3mm for tapered impl. procedure
11CT-BTC35Body try in 3.50mm for tapered impl. procedure
12
CT-BTC40Body try in 4mm for tapered impl. procedure
Conical Connection Surgical Kit
®
3
1
2
4
5
6
7
8
9
9
9
10 11 12
13 14 15
16 17 18
19 27
23 31
35
21 29
25 33
37
20 28
24 32
36
22 30
26 34
3839 40 41 42 43
44
45
13
CT-TDC30Step drill Ø3/2.4mm, external irrigation
14
CT-TDC35Step drill Ø3.5/3mm, external irrigation
15
CT-TDC40Step drill Ø4/3.5mm, external irrigation
MT-CSN33Countersink for narrow platform implant system
16
MT-GDN33Countersink for standard platform implant system
17
MT-GDN50Countersink for wide platform implant system
18
CT-NSR10
30
Short ratchet insertion tool for C1 implant, coni. con., narrow platform
28CT-NLR10Long ratchet insertion tool for C1 implant, coni. con., narrow platform
27CT-NLI10Long insertion tool for C1 implant, coni. con., narrow platform
29
CT-NSI10Short insertion tool for C1 implant, coni. con., narrow platform
31
CT-SLI10Long insertion tool for C1 implant, coni. con., standard platform
32
CT-SLR10Long ratchet insertion tool for C1 implant, coni. con., standard platform
34
CT-SSR10Short ratchet insertion tool for C1 implant, coni. con., standard platform
33
CT-SSI10Short insertion tool for C1 implant, coni. con., standard platform
CT-WSI10
37
Short insertion tool for C1 implant, coni. con., wide platform
35
CT-WLI10Long insertion tool for C1 implant, coni. con., wide platform
36
CT-WLR10Long ratchet insertion tool for C1 implant, coni. con., wide platform
45
MT-RT070Torque wrench for implant placement
The tools shown are in proportion to one another
Key to code used:
Non sterile
ManufacturerBatch Code
Catalog Number
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
38
CT-WSR10Short ratchet insertion tool for C1 implant, coni. con., wide platform
MT-BTI20
44
Implant site depth probe
43
MT-RDS30Short driver for 0.05 inch hex.
41
MT-DE001Drill extender
39
MT-RE160Int. connection abutment extractor, narrow platform
40
MT-RE172Int. connection abutment extractor
800-1000 600-800
Ø1.90 Ø3.30Ø2.40 Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Torque Max.
45N·cm
Final drill For bone type 1&2
Final drill For bone type 3&4
800-1000 600-800 450-650
Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40
200-400 200-400300-500Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Torque Max.
60N·cm
Torque Max.
60N·cm
Torque Max.
60N·cm
Drilling Speed (RPM)
Diameter
Ø 3.30mmØ 3.30mm
1200-1500 900-1200
Ø1.90 Ø3.30Ø2.4 Ø2.40
15-25
For bonetype 1,2&3
Final drill
Ø2.40 Ø3.20
200-500 Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø2.40 Ø3Ø1.90 Ø2.40
500-700
Ø3.50 Ø3.50
400-700Ø3.50
Ø4
200-400
Ø4.20
15-25
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø1.90 Ø3 Ø3.75Ø2.40 Ø2.40
500-700 15-25Ø3
Ø3.60
200-400
Ø3
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
DiameterØ4.10 Ø 4.90
200-400
Ø5
15-25
Ø4
400-6001200-1500 900-1200
Ø2.40 Ø3 Ø3.50Ø2.40Ø1.90
500-700 400-700
Ø4
For bonetype 1,2&3
Final drill
Ø 3.75mmØ 3.90mm
Ø 4.20mmØ 4.30mm
Ø 5mmØ 5mm
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
C1 Surgical ProceduresV3 Surgical Procedures
800-1000 600-800
Ø1.90 Ø3.30Ø2.40 Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Torque Max.
45N·cm
Final drill For bone type 1&2
Final drill For bone type 3&4
800-1000 600-800 450-650
Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40
200-400 200-400300-500Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Torque Max.
60N·cm
Torque Max.
60N·cm
Torque Max.
60N·cm
Drilling Speed (RPM)
Diameter
Ø 3.30mmØ 3.30mm
1200-1500 900-1200
Ø1.90 Ø3.30Ø2.4 Ø2.40
15-25
For bonetype 1,2&3
Final drill
Ø2.40 Ø3.20
200-500 Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø2.40 Ø3Ø1.90 Ø2.40
500-700
Ø3.50 Ø3.50
400-700Ø3.50
Ø4
200-400
Ø4.20
15-25
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø1.90 Ø3 Ø3.75Ø2.40 Ø2.40
500-700 15-25Ø3
Ø3.60
200-400
Ø3
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
DiameterØ4.10 Ø 4.90
200-400
Ø5
15-25
Ø4
400-6001200-1500 900-1200
Ø2.40 Ø3 Ø3.50Ø2.40Ø1.90
500-700 400-700
Ø4
For bonetype 1,2&3
Final drill
Ø 3.75mmØ 3.90mm
Ø 4.20mmØ 4.30mm
Ø 5mmØ 5mm
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
C1 Surgical ProceduresV3 Surgical Procedures
800-1000 600-800
Ø1.90 Ø3.30Ø2.40 Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Torque Max.
45N·cm
Final drill For bone type 1&2
Final drill For bone type 3&4
800-1000 600-800 450-650
Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40
200-400 200-400300-500Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Torque Max.
60N·cm
Torque Max.
60N·cm
Torque Max.
60N·cm
Drilling Speed (RPM)
Diameter
Ø 3.30mmØ 3.30mm
1200-1500 900-1200
Ø1.90 Ø3.30Ø2.4 Ø2.40
15-25
For bonetype 1,2&3
Final drill
Ø2.40 Ø3.20
200-500 Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø2.40 Ø3Ø1.90 Ø2.40
500-700
Ø3.50 Ø3.50
400-700Ø3.50
Ø4
200-400
Ø4.20
15-25
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø1.90 Ø3 Ø3.75Ø2.40 Ø2.40
500-700 15-25Ø3
Ø3.60
200-400
Ø3
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
DiameterØ4.10 Ø 4.90
200-400
Ø5
15-25
Ø4
400-6001200-1500 900-1200
Ø2.40 Ø3 Ø3.50Ø2.40Ø1.90
500-700 400-700
Ø4
For bonetype 1,2&3
Final drill
Ø 3.75mmØ 3.90mm
Ø 4.20mmØ 4.30mm
Ø 5mmØ 5mm
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
C1 Surgical ProceduresV3 Surgical Procedures
800-1000 600-800
Ø1.90 Ø3.30Ø2.40 Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Torque Max.
45N·cm
Final drill For bone type 1&2
Final drill For bone type 3&4
800-1000 600-800 450-650
Ø1.90 Ø3.90Ø2.40 Ø3 Ø3Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø4.30Ø2.40 Ø3 Ø3.50 Ø3.50Ø2.40
200-400 200-400Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
350-550800-1000 600-800 450-650
Ø1.90 Ø5Ø2.40 Ø3 Ø3.50 Ø4 Ø4Ø2.40
200-400 200-400300-500Drilling Speed (RPM)
Diameter
Final drill For bone type 1&2
Final drill For bone type 3&4
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ The drilling sequence is illustrated using 11.50mm implants.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Torque Max.
60N·cm
Torque Max.
60N·cm
Torque Max.
60N·cm
Drilling Speed (RPM)
Diameter
Ø 3.30mmØ 3.30mm
1200-1500 900-1200
Ø1.90 Ø3.30Ø2.4 Ø2.40
15-25
For bonetype 1,2&3
Final drill
Ø2.40 Ø3.20
200-500 Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø2.40 Ø3Ø1.90 Ø2.40
500-700
Ø3.50 Ø3.50
400-700Ø3.50
Ø4
200-400
Ø4.20
15-25
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
Diameter
1200-1500 900-1200
Ø1.90 Ø3 Ø3.75Ø2.40 Ø2.40
500-700 15-25Ø3
Ø3.60
200-400
Ø3
For bonetype 1,2&3
Final drill
Drilling Speed (RPM)
DiameterØ4.10 Ø 4.90
200-400
Ø5
15-25
Ø4
400-6001200-1500 900-1200
Ø2.40 Ø3 Ø3.50Ø2.40Ø1.90
500-700 400-700
Ø4
For bonetype 1,2&3
Final drill
Ø 3.75mmØ 3.90mm
Ø 4.20mmØ 4.30mm
Ø 5mmØ 5mm
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
▪ Do not use the final drill for bone type 4.
▪ The drilling sequence is demonstrated by a 13mm implant.
▪ Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
C1 Surgical ProceduresV3 Surgical Procedures
MT-RDL30
42
Long driver for 0.05 inch hex.
MP-WC51T Rev.1 May 2017
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, IsraelWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
®
The MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 – Quality Management
System and Medical Device Directive 93/42/EEC. MIS
products are CE marked.
Surgical Kit Content:
CT-P2410Pilot drill with built in stopper Ø2.4/2.0 height 10mm
5
MT-PDM24Position drill mill Ø2.4mm
2
3
MT-PD440Position drill Ø4mm
MT-SMD10Spade marking drill
1
4
Pilot drill with built in stopper Ø2.4/2.0 height 8mmCT-P2408
CT-SSM30Short motor insertion tool for V3 implant, coni. con., SP
25
CT-NLM30Long motor insertion tool for V3 implant, coni. con. NP
19
CT-SLM30Long motor insertion tool for V3 implant, coni. con., SP
23
24
CT-SLR30Long ratchet insertion tool for V3 implant, coni. con., SP
CT-SSR30Short ratchet insertion tool for V3 implant, coni. con., SP
26
CT-NLR30Long ratchet insertion tool for V3 implant, coni. con., NP
20
CT-NSR30Short ratchet insertion tool for V3 implant, coni. con., NP
22
CT-NSM30Short motor insertion tool for V3 implant, coni. con., NP
21
6
CT-P2411Pilot drill with built in stopper Ø2.4/2.0 height 11.5mm
CT-P2413Pilot drill with built in stopper Ø2.4/2.0 height 13mm
7
8
CT-P2416Pilot drill Ø2.4/2.0 height 16mm
9
CT-BTC24Body try in 2.40mm for tapered impl. procedure
10
CT-BTC30Body try in 3mm for tapered impl. procedure
11CT-BTC35Body try in 3.50mm for tapered impl. procedure
12
CT-BTC40Body try in 4mm for tapered impl. procedure
Conical Connection Surgical Kit
®
3
1
2
4
5
6
7
8
9
9
9
10 11 12
13 14 15
16 17 18
19 27
23 31
35
21 29
25 33
37
20 28
24 32
36
22 30
26 34
3839 40 41 42 43
44
45
13
CT-TDC30Step drill Ø3/2.4mm, external irrigation
14
CT-TDC35Step drill Ø3.5/3mm, external irrigation
15
CT-TDC40Step drill Ø4/3.5mm, external irrigation
MT-CSN33Countersink for narrow platform implant system
16
MT-GDN33Countersink for standard platform implant system
17
MT-GDN50Countersink for wide platform implant system
18
CT-NSR10
30
Short ratchet insertion tool for C1 implant, coni. con., narrow platform
28CT-NLR10Long ratchet insertion tool for C1 implant, coni. con., narrow platform
27CT-NLI10Long insertion tool for C1 implant, coni. con., narrow platform
29
CT-NSI10Short insertion tool for C1 implant, coni. con., narrow platform
31
CT-SLI10Long insertion tool for C1 implant, coni. con., standard platform
32
CT-SLR10Long ratchet insertion tool for C1 implant, coni. con., standard platform
34
CT-SSR10Short ratchet insertion tool for C1 implant, coni. con., standard platform
33
CT-SSI10Short insertion tool for C1 implant, coni. con., standard platform
CT-WSI10
37
Short insertion tool for C1 implant, coni. con., wide platform
35
CT-WLI10Long insertion tool for C1 implant, coni. con., wide platform
36
CT-WLR10Long ratchet insertion tool for C1 implant, coni. con., wide platform
45
MT-RT070Torque wrench for implant placement
The tools shown are in proportion to one another
Key to code used:
Non sterile
ManufacturerBatch Code
Catalog Number
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
38
CT-WSR10Short ratchet insertion tool for C1 implant, coni. con., wide platform
MT-BTI20
44
Implant site depth probe
43
MT-RDS30Short driver for 0.05 inch hex.
41
MT-DE001Drill extender
39
MT-RE160Int. connection abutment extractor, narrow platform
40
MT-RE172Int. connection abutment extractor