311, 330, 338, 339, 344, 345, 348, 350, 351, 379 Not available. GHS product identifier Other means of identification Emergency telephone number (with hours of operation) Section 1. Identification : : : Supplier's details : Relevant identified uses of the substance or mixture and uses advised against Conforms to HazCom 2012/United States SAFETY DATA SHEET 311, 330, 338, 339, 344, 345, 348, 350, 351, 379 Refractory Ceramic Shape. EMHART Glass Manufacturing Inc. 405 East Peach Street PO Box 580 Owensville MO 65066 USA Tel: +1 573 437 2132 Fax: +1 573 437 3146 CHEMTREC, U.S. : 1-800-424-9300 International: +1-703-527-3877 (24/7) Section 2. Hazards identification SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) [lungs] - Category 1 AQUATIC TOXICITY (CHRONIC) - Category 3 Classification of the substance or mixture : Signal word : Danger Hazard statements : Causes damage to organs through prolonged or repeated exposure. (lungs) Harmful to aquatic life with long lasting effects. Hazard pictograms : Precautionary statements Prevention : Avoid release to the environment. Do not breathe dust. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Response : Get medical attention if you feel unwell. Storage : Not applicable. Disposal : Dispose of contents and container in accordance with all local, regional, national and international regulations. GHS label elements OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Hazards not otherwise classified : None known. 1/11 Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767) www.kmkregservices.com www.askdrluc.com www.ghssmart.com
11
Embed
Conforms to HazCom 2012/United States SAFETY …old.emhartglass.com/files/311, 330, 338, 339, 344, 345, 348, 350... · Product/ingredient nameOSHAIARC NTP There is no data available.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
311, 330, 338, 339, 344, 345, 348, 350, 351, 379
Not available.
GHS product identifier
Other means of identification
Emergency telephone number (with hours of operation)
Section 1. Identification:
:
:
Supplier's details :
Relevant identified uses of the substance or mixture and uses advised against
EMHART Glass Manufacturing Inc.405 East Peach StreetPO Box 580Owensville MO 65066 USATel: +1 573 437 2132Fax: +1 573 437 3146
CHEMTREC, U.S. : 1-800-424-9300 International: +1-703-527-3877(24/7)
Section 2. Hazards identification
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) [lungs] - Category 1AQUATIC TOXICITY (CHRONIC) - Category 3
Classification of the substance or mixture
:
Signal word : Danger
Hazard statements : Causes damage to organs through prolonged or repeated exposure. (lungs)Harmful to aquatic life with long lasting effects.
Hazard pictograms :
Precautionary statements
Prevention : Avoid release to the environment. Do not breathe dust. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Response : Get medical attention if you feel unwell.
Storage : Not applicable.
Disposal : Dispose of contents and container in accordance with all local, regional, national and international regulations.
GHS label elements
OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:
Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Description of necessary first aid measures
Specific treatments : No specific treatment.
Most important symptoms/effects, acute and delayed
Inhalation : No known significant effects or critical hazards.
No known significant effects or critical hazards.:Ingestion
Skin contact : No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No known significant effects or critical hazards.
No known significant effects or critical hazards.
No known significant effects or critical hazards.
:
:
:
Eye contact : No known significant effects or critical hazards.
Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary
Check for and remove any contact lenses. Immediately flush eyes with plenty of water for at least 20 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 20 minutes while removing contaminated clothing and shoes. Get medical attention immediately.
Move exposed person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.Get medical attention immediately.
Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Section 4. First aid measuresProtection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
See toxicological information (Section 11)
Section 5. Fire-fighting measures
No special protection is required.
Hazardous thermal decomposition products
Specific hazards arising from the chemical
Decomposition products may include the following materials:metal oxide/oxides
This material is harmful to aquatic life with long lasting effects. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective equipment for fire-fighters
Use an extinguishing agent suitable for the surrounding fire.
Extinguishing media
:
:
:
None known.
Suitable extinguishing media
:
Unsuitable extinguishing media
:
Special protective actions for fire-fighters
:
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
:
: Put on appropriate personal protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment if released in large quantities.
Prevent entry into sewers, water courses, basements or confined areas. Avoid dust generation. Do not dry sweep. Vacuum dust with equipment fitted with a HEPA filter and place in a closed, labeled waste container. Dispose of via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.
:
Methods and materials for containment and cleaning up
For non-emergency personnel
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel".
Conditions for safe storage,including any incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating,drinking and smoking. See also Section 8 for additional information on hygiene measures.
Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.
:
:
Protective measures Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Do not reuse container.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists,gases or dusts.
Eye/face protection :
Environmental exposure controls
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.
Appropriate engineering controls
: If user operations generate dust, fumes, gas, vapor or mist, use process enclosures,local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Wash hands, forearms and face thoroughly after handling chemical products, before eating, drinking, smoking and using the lavatory and at the end of the working period.Ensure that eyewash stations and safety showers are close to the workstation location.
Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
Respiratory protection :
:
Body protection Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
:
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Acute LC50 5.5 ppm Fresh water Daphnia - Daphnia magna - Juvenile (Fledgling, Hatchling, Weanling)
48 hours
Acute LC50 1000 mg/L Fresh water Fish - Pimephales promelas 96 hoursChronic NOEC 0.984 mg/L Fresh water Algae - Pseudokirchneriella subcapitata -
Exponential growth phase72 hours
Product/ingredient name SpeciesResult Exposure
Persistence and degradability
Soil/water partition coefficient (KOC)
: There is no data available.
Mobility in soil
There is no data available.
There is no data available.
Section 13. Disposal considerationsThe generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling empty containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No. No. No.
Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
: Not available.
:
Section 15. Regulatory informationU.S. Federal regulations :
SARA 313
Clean Air Act Section 112(b) Hazardous Air Pollutants (HAPs)
: Not listed
Clean Air Act Section 602 Class I Substances
: Not listed
Clean Air Act Section 602 Class II Substances
: Not listed
DEA List I Chemicals (Precursor Chemicals)
: Not listed
DEA List II Chemicals (Essential Chemicals)
: Not listed
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): All components are listed or exempted.
The following components are listed: Aluminium oxide; Cristobalite
WARNING: This product contains a chemical known to the State of California to cause cancer.
Massachusetts :
Product name CAS number %
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Ingredient name Cancer Reproductive No significant risk level
Maximum acceptable dosage level
Aluminium oxide 1344-28-1 60 - 100
Aluminium oxide 1344-28-1 60 - 100
Form R - Reporting requirements
Supplier notification
California Prop. 65
New York : None of the components are listed.
New Jersey : The following components are listed: Aluminium oxide; Cristobalite; Titanium Dioxide
Pennsylvania : The following components are listed: Aluminium oxide; Cristobalite; Titanium Dioxide
State regulations
Australia inventory (AICS): All components are listed or exempted.China inventory (IECSC): All components are listed or exempted.Japan inventory: Not determined.Korea inventory: All components are listed or exempted.Malaysia Inventory (EHS Register): Not determined.New Zealand Inventory of Chemicals (NZIoC): All components are listed or exempted.Philippines inventory (PICCS): Not determined.Taiwan inventory (CSNN): Not determined.
International regulations
International lists :
Chemical Weapons Convention List Schedule I Chemicals
: Not listed
Chemical Weapons Convention List Schedule II Chemicals
: Not listed
Chemical Weapons Convention List Schedule III Chemicals
: Not listed
Section 16. Other informationHazardous Material Information System (U.S.A.)
National Fire Protection Association (U.S.A.)
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA).HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
Key to abbreviations : ATE = Acute Toxicity EstimateBCF = Bioconcentration FactorGHS = Globally Harmonized System of Classification and Labelling of ChemicalsIATA = International Air Transport AssociationIBC = Intermediate Bulk ContainerIMDG = International Maritime Dangerous GoodsLogPow = logarithm of the octanol/water partition coefficientMARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)UN = United Nations
Notice to readerTo the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.