Top Banner
The Basics of... Confined Space 60 deaths in 1992 85 deaths in 1996 60% of deaths come about when someone tries to rescue someone else!
21
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Confined Space

The Basics of...Confined Space

60 deaths in 199285 deaths in 1996

60% of deaths come about when someone tries to rescue someone else!

Page 2: Confined Space

What is a confined space?

1. It must have limited openings for entry and exit

2. It must have unfavorable natural ventilation which could contain or produce dangerous air contaminants

3. It is not intended for continuous employee occupancy.

Page 3: Confined Space

“any space having a limited means of egress, which is subject to the accumulation of toxic or flammable contaminants or has an oxygen deficient atmosphere. Confined or enclosed spaces include, but are not limited to, storage to, storage tanks, process vessels, bins, boilers, ventilation or exhaust ducts, sewers, underground utility vaults, tunnels, pipelines, and open top spaces more than 4 feet deep such as pits, tubs, vaults, and vessels.“

OSHA StandardOSHA Standard

Page 4: Confined Space

Confined Space vs.

Permit-Required Confined Space

Page 5: Confined Space

Confined Space

1. A person can fit into it

2. There is limited egress and entry

3. It is not designed for continuous work by workers

Page 6: Confined Space

Permit-Required Confined Space

1.There is a potential for it to accumulate or contain a hazardous atmosphere

2. There is material in it that has the potential for engulfing a worker or any other personnel

3. There is the potential to trap or asphyxiate a worker because of the nature of the space

4. There are other potential safety and health hazards present

Page 7: Confined Space

OSHA 1910-146Confined Space StandardAppendix A

Page 8: Confined Space

Step-by-step procedures

1.Identify all confined spaces at all facilities.

2.Make sure all employees and personnel know what areas are considered confined spaces and make sure that they are clearly labeled as such by posting the appropriate signs.

Page 9: Confined Space

3. Identify all personnel who will be authorized to enter the confined spaces and train them in all the procedures inherent in confined space work.

4. Make sure that all required Personal Protective Equipment (Tyvek suits, respirators, gloves, etc…) are in stock and available for all authorized personnel when they should need it.

5. Plan for and have available all rescue and retrieval equipment necessary for getting worker(s) out of the confined space (conscious or unconscious) if the need should arise.

Page 10: Confined Space

6. Measure and monitor the air quality inside the confined space before entry and at all times while work is being done inside the confined space using gas monitors. Use ventilation and blowers if necessary to maintain the quality of the air. If the air quality cannot be improved then the confined space should be considered Immediately Dangerous to Life and Health (IDLH) and the appropriate respirator should be used at all time by all workers while in the confined space.

7. Make sure that there is an attendant outside of the confined space at all times in order to provide rescue and retrieval if needed.

8. Make sure that the CONFINED SPACE ENTRY PERMIT (See appendix Two) is properly and completely filled out and signed by the entry supervisor prior to entry by any personnel.

Page 11: Confined Space

9. Establish proper communication procedures so that all workers are in constant contact with the attendant(s) outside the confined space.

10. Identify, implement and monitor all lockout procedures both inside the confined space as well as those outside the confined space that could potentially have an effect on the conditions inside the confined space and/or on the attendant(s) outside the confined space.

Page 12: Confined Space

Confined Space Air Monitoring

Page 13: Confined Space

1. Prior to any worker entering a confined space, the quality of the air must be determined. This is most often done using a confined space air monitor that measures H2S, CO, LEL and O2. Additionally, if there is reason to suspect some other type of gas (ammonia in food processing plants, for example) then steps should be put in place to make sure to monitor for those as well.

Page 14: Confined Space

2. If the air quality is not acceptable, ventilation should be used to circulate the bad air out and to bring in breathable air.

Page 15: Confined Space

3. Once the air quality is within the acceptable range, workers may enter the confined space to do the required work. Continued monitoring of the air quality is required for as long as there is still anyone inside the confined space as air quality can change at any time.

Page 16: Confined Space

Protecting confined spaces openings

Page 17: Confined Space

Ventilating confined Spaces

Confined Space Ventilation falls into two categories:

1. Push Ventilation – This is when fresh air is blown (pushed) into a confined space

2. Pull Ventilation – This is when the bad air is “sucked” out of the confined Space

Page 18: Confined Space
Page 20: Confined Space