Configuring your Phone Quick Installation Guide Configuration of the phone is centrally managed from the Zultys MX IP phone system. For most deployments the phone will receive an IP address from the DHCP server on the local network. For the phone to automatically download its configuration information the DHCP server must have Option 66 enabled and configured with the address of the Zultys MX IP phone system. For further information about configuration of the phone please refer to the ZIP 35i Administration Manual. For more information, refer to ZIP 35i User Guide. 96-35351-01 Wall Mount Drilling Template Drill two holes vertically spaced 80mm/3.15” apart. After the IP phone is connected to the network and supplied with power, it automatically begins a process of initializing on the network and downloading it's configuration information. Contact your system administrator if the phone fails to register with the IP phone system. Startup FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ZIP 35i Business Phone Welcome ... Initializing ... Please Wait 80mm/3.15”