This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
(1) Building Block shelf expansion - Bus Master/Bus Master Expansion, Bus Slave - Built in Cooling fan to Shelf(Connect 4 Shelf/Increase EXT card) (2) New Card - EMPR Powerful 32bit CPU(Clock 200MHz, 360MIPS) Twice faster than TDA100/200(Clock 133MHz, 170MIPS) - EMEC Expanding the memory size SRAM(2MB -> 4MB) - ESLC16/EMSLC16, ELCOT16 CPU is used to reduce the load of EMPR - EECOH16 By using the Time Slot for Shelf inter connection (3) Improve the Battery Back up connection - Connecting multiple shelves to one set of backup batteries
(1) Building Block shelf expansion - Bus Master/Bus Master Expansion, Bus Slave - Built in Cooling fan to Shelf(Connect 4 Shelf/Increase EXT card) (2) New Card - EMPR Powerful 32bit CPU(Clock 200MHz, 360MIPS) Twice faster than TDA100/200(Clock 133MHz, 170MIPS) - EMEC Expanding the memory size SRAM(2MB -> 4MB) - ESLC16/EMSLC16, ELCOT16 CPU is used to reduce the load of EMPR - EECOH16 By using the Time Slot for Shelf inter connection (3) Improve the Battery Back up connection - Connecting multiple shelves to one set of backup batteries
3. New Hardware Architecture
Confidential 7
4. System Card Configuration
USB
EMSLC16
CSIF 8
ELCOT16
DLC16
DHLC8
E1
E&M8
BRI8
PRI30
EMPR
RS-232C
RMT
EMEC
SD (64MB)
Basic Shelf
CID/PAY8
(Trunk cards)
MSG4
DPH4 or DPH2
EIO4
(Optional Cards)
DLC8
SLC 8
ESLC16
CID8
BRI4
CSIF 4
OPB3
IP-GW16
ECID
EECHO16
DID8 (HK only)
CTI-Link
IP-EXT16
T1
PRI23
KX-TDA600
System
IP-GW4E
Basic Shelf
Expansion Shelf 1
Expansion Shelf 2
Expansion Shelf 3
BUS-M
BUS-ME
BUS-ME
BUS-S
BUS-S
BUS-S
Cable
(Extension cards)
New card
Confidential 8
EMPR : Enhanced Main Processor card
5. Cards Specification (1/8) Main Processor Card
Basic
Shelf
Expansion
Shelf
128MB
64 MB for built in SD Card
128 MB for Enhanced SD (KX-TDA6920)(128 MB : Anticipating the function addition in the future)
KX-TDA6105(Memory Expansion Card)
Current KX-TDA0196(Remote Modem Card) Connector
Note: MEC(KX-TDA0105) cannot be used.(The shape of connector is different)
Note : The position where EMEM and RMT was changed.
Hot Swap
Confidential 9
5. Cards Specification (2/8)
Basic
Shelf
Expansion
Shelf
BUS Card(1/3)
BUS-M : BUS Muster Card(KX-TDA6110)
KX-TDA6111(BUS Muster Expansion Card)
To connect 2nd Self(Built in)
To connect 3rd Self
To connect 4th Self
Without CPU
Hot Swap
Confidential 10
5. Cards Specification (3/8)
Basic
Shelf
Expansion
Shelf
BUS Card(2/3)
BUS-M : BUS Slave Card(Built in)
CPU
To connect Basic Self
Same type of EMPR-CPU is used.
(1) Sending and receiving of data from BUS-M(2) Sending and receiving of data from LPR in Shelf(3) Tone generation(4) Transmission of broadcast data(5) LCD display (Idle/Talk)
CPU of BUS-S is processed as follows (To decrease the load of EMPR)
Confidential 11
BUS Configuration between ShelvesBUS Configuration between Shelves
BUS-S
BUS-S
BUS-M
BUS-MEBUS-ME
BUS-S
BUS-M
BUS-Master(TDA6110)
BUS-Master Expansion
BUS-Slave(Built-in)
BUS-S
BUS-S
BUS-M
BUS-MEBUS-ME
BUS-MEBUS-ME
BUS-S
(TDA6111)
The connecting Cables are included in :- BUS-M (TDA6110)- BUS-ME (TDA6111)