Confidential Battery Operated Photoelectric Detector AX-100TFR (30m) AX-200TFR (60m)

confidential

Battery 　 Operated 　 　 　 　 　Photoelectric 　 Detector

AX-100TFR (30m)

AX-200TFR (60m)

1. Product & development concept2. Product outline3. Features4. Schedule

Table of Contents

2. Product Concept

Tot

al c

ost

Wired

Installation costEquipment cost

Wireless

User benefit

1. Product & development concept

- Concept - 1. Reduce Total Cost of installation. 2. Realize the outdoor protection with wireless technology combining with VX-402R and BX-80NR

-　Initial　cost　comparison　(A　zone)　–-　Initial　cost　comparison　(A　zone)　–

2. Product outline

※Not compatible with OPTEX’s wired photobeams.

Conventional reliable technology

※ The optional main unit mounting bracket set “MP-4” is needed, when tower mounting.

Various mounting patterns

Basic　capability　is　the　same　as　OPTEX’s　wired　photobeams.Basic　capability　is　the　same　as　OPTEX’s　wired　photobeams.With　the　high　reliable　technology,　we　succeeded　in　development　of　it.With　the　high　reliable　technology,　we　succeeded　in　development　of　it.

2-1. Tower mounting

- Option :MP-4

※The switch selection is not recognized with the tamper bushing inserted. Please remove the tamper bushing before selecting a function using the switch.

Main unit mounting plate

Tamper Bushing

-Option- MP-4 : for tower mounting

※Without the tamper bushing, the LEDs are kept ON, which consumes more battery power.

3. Features

1. Multifunctional back box

2. Easy installation

3. Easy maintenance

4. High reliable tamper alarm5. Long battery life

6. Low battery output & LED indicator

7. Auxiliary Functions for Wireless Transmitters

3-1. Multifunctional back box

Body structure

Lead Wire

Battery box

Back box

4-2. Easy installation

Insert the batteries into the battery box

1st Step 3rd Step

Put a wireless transmitter into the back box by using the supplied Velcro tape

2nd Step

Connect the lead wire to a wireless transmitter ※ The lead wire is prewired between main unit terminals and back box.

Finish4th Step

Mount the unit and set the optical alignment as well as function switches.

< Installation >

Time-saver!!

Loosen the lock screw of the back box

1st Step 2nd Step

Remove the unit from the chassis

3rd Step

Replace the batteries※Remove all batteries prior to replacing with new ones. If this is not followed, the low battery LED will not reset and continue to flicker.

4th Step

Put it back onto the chassis

4-3. Easy maintenance

< Replacement procedure of batteries >

It　allows　you　to　easily　replace　the　batteries　without　opening　the　front　cover!It　allows　you　to　easily　replace　the　batteries　without　opening　the　front　cover!Not　necessary　to　do　the　optical　alignment!Not　necessary　to　do　the　optical　alignment!

4-4. High reliable tamper alarm

Front Cover Tamper Back Box Tamper Wall Tamper

※ Back box tamper and wall tamper are common terminal.

Main Unit Terminal Back Box Terminal

4-5. Long battery life

Battery Life

AX-100TFR(30m) : Approx. 5 years

AX-200TFR(60m) : Approx. 3 years

※Use four LSH(3.6V, 13Ah) batteries manufactured by SAFT.(not included) ※Battery life of AX-200TFR receiver is approximately 5 years.

Low battery LED-LED is flickering, when the battery power becomes low.※ only when open front cover

Low battery output-The unit automatically outputs, when the battery power becomes low.※ Disabled to share of the LOW BATTERY SIGNAL with wireless transmitter. To monitor the low battery signal of the unit, use a two inputs type of transmitter or two units of wireless transmitters.

< Receiver >

Low battery LED

4-6. Low battery output & LED indicator

< Transmitter >

4-7. Auxiliary functions for wireless transmitters

Battery Saving Timer-Alarm output activation are limited by a timer 2 minutes. Even if there are continuous alarm event, the alarm output operates only once in the timer period. It prolongs the battery life of a wireless transmitter.

Intermittent Output Timer-When wireless transmitter is being used, which is unable to determine whether the alarm output continues, the intermittent output timer function configures the wireless transmitter to send alarms at specific time intervals.

※If a wireless transmitter is able to send separately “Alarm signal” and “Restore signal” to wireless receiver, its function is not needed. Most of wireless transmitters have this function.

4. Schedule

Available 2nd Quarter

Coming soon!!

Thank you

Precautions for installing

Not compatible with OPTEX’s wired photobeams

Hard-wiredPhotobeam

Wireless Photobeam(AX-100/200TFR)

Hard-wiredPhotobeam

Wireless Photobeam(AX-100/200TFR)

※In case that AX-100/200TFR would be installed with OPTEX wired photobems at the same site, ensure that wired transmitter beams cannot affect any other receiver of AX-100/200TFR.

Hard-wiredPhotobeam

Wireless Photobeam(AX-100/200TFR)