OCTOBER 9-11, 2013 TORONTO, ONTARIO CANADA CONFERENCE PROGRAM SPONSORS AND EXHIBITORS // 1 WELCOME LETTER // 2 SCHEDULE AT A GLANCE // 3 PLENARY SESSION // 5 POSTER SESSION // 10 BREAKOUT SESSIONS // 15 PLANNING COMMITTEE // 27 SUPPORTING PARTNERS: STUDENT TRAVEL SPONSORS: TECHNICAL CONTENT COMPILED BY:
32
Embed
ConferenCe program - · PDF fileConferenCe program SponSorS and ... and Biomaterials Processing and an Associate Director of the Pulp and Paper Centre at ... New Mexico working in
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
OCTOBER 9-11, 2013 TORONTO, ONTARIO CANADA
ConferenCe program
SponSorS and exhibitorS // 1
WelCome letter // 2
SChedule at a glanCe // 3
plenary SeSSion // 5
poSter SeSSion // 10
breakout SeSSionS // 15
planning Committee // 27
Supporting partnerS: Student travel SponSorS:
teChniCal Content Compiled by:
1 InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada
thank you to our SponSorS:
SponSorS and exhibitorS
gold
Silver
bronze
thank you to our exhibitorS:
Convened by:
2
Welcome to the International Conference on Wood Adhesives 2013 in Toronto, Ontario, Canada! The wood
adhesives conference is the leading international conference focused exclusively on new research and devel-
opment related to wood adhesives and bonded wood products and has been held once every 4-5 years with
superb participation from both industry and academia.
The International Conference on Wood Adhesives serves as a premier forum for scientific and technical ex-
change. This year, in addition to the traditional topics surrounding wood adhesives and bonded products,
additional emphasis is placed on the environmental aspects adhesives and bonded wood products, and more
effective use of wood resources. Lower environmental impact and more efficient use of wood resources are
playing an increasingly important role in the 21st century. This has led to a continuing need for research and
implementation of new adhesives and bonded wood products. This conference provides an excellent oppor-
tunity to interact with leaders in these fields from around the world and to share knowledge and ideas among
industrial suppliers and users, academia, government, and NGOs.
We have recruited some of the best international technical experts in the field of wood adhesives as plenary
speakers to deliver to you a series of key topics related to new markets, standards, performance, and emerging
trends. You will also find ample social opportunities to reconnect with old colleagues and make new acquain-
tances at the welcome reception in the evening prior to the conference and at the reception during the poster
session.
This year we will have a large poster session that is co-sponsored by the Wood Based Composite Center (WBC),
USDA Forest Service, Forest Products Laboratory (FPL), the Forest Products Society (FPS), and the Centre for
Biocomposites & Biomaterials Processing at the University of Toronto. We strongly encourage you to attend
the session to learn more about the newest student research and to help further strengthen the connections
between academic research and industry.
Another exciting new initiative this year is that in addition to the peer-reviewed proceeding for the conference
that will be published after the meeting, selected papers from the conference will also be included in a special
issue to be published by the Forest Products Journal.
On behalf of the organizing committee, we hope you will find the next three days of the conference productive
and rewarding. This year will be the first time this conference is held outside the United States. Toronto, being
the largest city in Canada, is also a cultural, entertainment and financial capital well known for its multicultural-
ism and for wonderful cuisines from around the world. We hope you will also be able to find time to enjoy what
this great city has to offer while attending the conference.
Enjoy the conference!
Sincerely,
Ning Yan, on behalf of, The International Organizing Committee
WelCome!
Convened by:
68th InternatIonal
ConventIon
InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada3
1:30 – 4:30 pm WBC I/UCRC Event: An open session on the fundamental-science research
needs of the wood-based composites industry // Ontario Room
Pre-registration required
5:00 – 8:00 pm Reception for all attendees // Niagara Room
6:30 pm Welcome & Announcements
tueSday, oCtober 8
SChedule at a glanCe
7:00 – 8:30 am Continental Breakfast // Niagara/Ontario Room
8:30 – 12:05 pm Morning Plenary Session // Ballroom B
Social Media and the Wood Products Industry: Insight From Downstream Customers and
Influencers
Poster # 41 Shin-ichiro Tohmura, Director, Forestry and Forest Products Research Institute
Aldehydes Emission from Glue-Laminated Timber – Effects of Ethanol Content and Direction
of Exposed Area Structure and Properties of Wood Adhesive Systems
Poster # 42 Yusuf Celikbag, Graduate Research Assistant, Auburn University
Modification and Characterization of Liquefied Southern Pine Wood-Based Epoxy Resin
Posters # 9 and 10 have been withdrawn.
14
the planning Committee gratefully acknowledges the following Sponsors for their generous support of the Wood adhesives poster Competition!
Student poster Competition sponsored by the university of toronto
Weyerhaeuser — Creating superior sustainable solutions for the world for more than 110 years.
OUR NAME IS INNOVATION
fpinnovations.ca Follow us
Discover how our research is revolutionizing the wood products industry.FPInnovations is helping to create non-traditional wood products in order to enhance the value of products generated from forest resources, so as to diversify wood markets and contribute to developing a new sustainable bioeconomy.
FPInnovations is among the world’s largest private, non-profit research centres working in forest innovation.
Pub_adhesives.indd 1 2013-08-26 12:53:45
InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada15
breakout SeSSionSthurSday, oCtober 10
7:00 – 8:15 am Continental Breakfast in the Niagara/Ontario Room
traCk 1: CompoSiteS and engineered Wood // ballroom a} traCk 2: developmentS in fundamen-
tal underStanding of Wood bonding // ballroom b
}
Introduction by Session Chairs Greg Smith, Associate Professor, Department of Wood Science, University of British Columbia and Mark Anderson, Senior VP, Research & Technology, Arclin-Performance Applied
Introduction by Session Chairs Doug Gardner, Professor of Wood Science and Technology, School of Forest Resources and Advanced Structures and Composites Center, University of Maine and Fred Kamke, Professor and JELD-WEN Chair of Wood-based Composites Science, Oregon State University
8:15 – 8:20 am
Xiaodong (Alice) Wang, Assistant Professor, Luleå Univerity of Technology
Engineered Wood under Cold Climate Part one: Shear tests of glued wood joints under cold temperatures
Samuel Ammann, ETH Zurich
Delamination Behaviour of Adhesively Bonded Structural Hardwood Elements
8:20 - 8:45 am
Toshiro Harada, Head of Wood Protection Laboratory, Dr., Forestry and Forest Products Research Institute
Adhesive Strength and Fire Resistance of Structural Glued Laminated Timber
Michael Obersriebnig, BOKU University for Life Sciences
Deepened Understanding Of Wood-Adhesive Bond Strength Formation By Measuring Strength Of Adhesion On The Microscale Using Nanoindentation
8:45 - 9:10 am
Ying-Li (Ingrid) Tsai, PhD Candidate, University of British Columbia
Coefficient of Static Friction between Resinated strand and Non-resinated Strand under Different Contact Pressure
Oliver Kläusler, Scientific assistant and PhD-Student, ETH Zurich, Institute for Building Materials, Group Wood Physics
Improvement Of Tensile-Shear Strength And Wood Failure Percentage Of 1C –PUR-Bonded Wooden Joints After Water Treatment By Means Of Priming
Meet the growing demand for environmentally-friendly interior wood products with Ashland’s formaldehyde-free Soyad adhesives. Formulated with a proprietary cross-linking resin and natural soy flour, these proven adhesives provide a strong, water-resistant bond and readily replace UF-based adhesives in hardwood plywood and composite panels. Stay ahead of regulations and improve indoor air quality for your customers and workers — go formaldehyde-free with Soyad adhesives.
Meet the growing demand for environmentally-friendly interior wood products with Ashland’s formaldehyde-free Soyad adhesives. Formulated with a proprietary cross-linking resin and natural soy flour, these proven adhesives provide a strong, water-resistant bond and readily replace UF-based adhesives in hardwood plywood and composite panels. Stay ahead of regulations and improve indoor air quality for your customers and workers — go formaldehyde-free with Soyad adhesives.
traCk 1: CompoSiteS and engineered Wood // ballroom a} traCk 2: developmentS in fundamen-
tal underStanding of Wood bonding // ballroom b
}
Milan Sernek, Professor, University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology
Bonding and bending performance of VTC wood composites
Jesse Paris, PhD Student, Oregon State University
Wood-Adhesive Penetration: Non-destructive, 3D visualization and quantification
9:55 - 10:20 am
Xiang-Ming Wang, Associate Re-search Leader and Principal Scientist, FPInnovations
Manufacturing Medium Density Particleboards from Black Spruce Bark/SPF Mixture and Different Adhesive Systems
Matthew Schwarzkopf, Graduate Research Assistant, Oregon State University
Analysis of Load Transfer in Laminated Wood Composites Based on Optical Strain Measurements Across the Bondline. Interfacing Between Empirical Data and Numerical Simulations
10:20 - 10:45 am
Frédéric Simon, Innovation Manager for Products & Process, F.C.B.A. Technological Institute
New generations of glulam beams made of French Domestic Hardwoods and Softwoods: new industrial applications in the field of Engineered Wood Products
John Nairn, Professor, Oregon State University
Direct 3D Numerical Simulation of Stress and Strains in Wood Adhesive Bond Lines Based on Actual Specimen Anatomy from X-Ray Tomography Data
10:45 - 11:10 am
Felipe Icimoto, Wood Industrial Engineer, University of São Paulo
Glulam Ties Manufactured With Pinus Oocarpa And Adhesive Polyurethane
Warren Grigsby, Research Leader, Scion
To What Extent Is Urea Formaldehyde Resin Really Cured In Medium Density Fibreboard?
11:10 - 11:35 am
11:35 – 12:50 pm Lunch in the Niagara/Ontario Room
InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada19
breakout SeSSionS, cont.thurSday, oCtober 10
traCk 1: unConventional produCtS and SubStrateS // ballroom a} traCk 2: analytiCal and teSting meth-
odology // ballroom b}
Introduction by Session Chairs Kaye-Uwe Schober, Professor of Timber Engineering & Structural Design, Mainz University of Applied Sciences and David Harper, Assistant Professor, Forest Products Center, University of Tennessee
Introduction by Session Chairs Chip Fraizer, Thomas M. Brooks Professor, Dept. of Wood Science & Forest Products, and Director, Wood-Based Composites Center, Virginia Tech and Johannes Konnerth, Deputy head, Institute of wood technology and renewable resources
12:50 – 12:55 pm
Mojgan Nejad, Postdoctoral Fellow, University of Toronto
Adhesion of Thermal Spray Metal Coating to Wood and Natural Fibre Reinforced Thermoplastics
Gordian Stapf, MPA University of Stuttgart
Creep Behaviour and Testing of One Component Polyurethanes and EPI Adhesives
12:55 - 1:20 pm
Kensuke Kawarada, Group Manager, Tokyo Metropolitan Industrial Technology Research Institute
Effects of Air-Injection Press on Emission of Volatile Organic Compounds from Particleboard
Jörg Schaffrath, Technische Universität München
Stresses And Strains In Glulam Due To Moisture Change – Differences Between Testing And Realness With Reference To Various Wood Species
1:20 - 1:45 pm
Mehmet Hakki Alma, PROF DR, Kahramanmaras Sutcu Imam University
Novolak Type Adhesive And Moldings From Liquefied Biomass
Meng Gong, Research Scientist, University of New Brunswick
Is Accelerated Aging A Reliable Approach To Evaluate Long-Term Performance Of Structural Adhesives?
1:45 - 2:10 pm
César Polanco Tapia, Universidad Distrital Francisco José de Caldas
Mechanical Characterization of Structural Glulam Widely Used Five Species In Colombia
Anti Rohumaa, Aalto University School of Chemical Technology
Impact Of Veneer Processing On Bond Properties And How To Reduce Testing Variablily
2:10 - 2:35 pm
2:35 – 2:55 pm Break
20
traCk 1: unConventional produCtS and SubStrateS // ballroom a} traCk 2: analytiCal and teSting meth-
odology // ballroom b}
Kay-Uwe Schober, Professor of Timber Engineering and Structural Design, Mainz University of Applied Sciences
Adhesive Strength Of Timber Joints With Unconventional Glued-In Steel Rod
Alexandra Himsel, Junior Researcher, Wood K plus - Competence Center for Wood Composites and Wood Chemistry
Novel Analytical Method To Determine Factors Causing Unwanted Sticking Of Glued Wood Particles Onto Machinery Parts
2:55 - 3:20 pm
Marina Alipon, Scientist, Forest Products Research and Development Institute
Performance Evaluation of Adhesives on Engineered Bamboo
Johannes Konnerth, Associate Professor, BOKU-University of Natural Resources and Life Sciences
Nanoindentation For Direct Evaluation Of Adhesion At The Cell Wall-Adhesive Interface & AFM-Based Polarity Characterization Of Wood Surfaces
3:20 - 3:45 pm
Carlito Calil Neto, PhD Student, University of Sao Paulo - Brazil
Specie-Treatment-Adhesive Combinations Using 4 Brazilian Reforestation Species, 3 Preservative Treatments And 3 Adhesives For Glulam Purpose
Joseph Jakes, Research Materials Engineer, USDA FS Forest Products Laboratory
Mapping Adhesive Infiltration In Wood Cell Walls With Synchrotron X-Ray Fluorescence Microscopy
3:45 - 4:10 pm
Yusuf Celikbag, Graduate Research Assistant, Auburn University
Characterization of Wood Liquefaction Oil for Adhesive Production
Hendrikus W. G. van Herwijnen, Deputy Area Manager, Wood K plus
Novel Methods To Investigate The UF Resin Distribution Within Industrial MDF And Chip Boards
4:10 - 4:35 pm
Enjoy dinner with collegues and friends in the City of Toronto
4:45 – 5:30 pm open meeting to diSCuSS a poSSible ongoing Wood adheSiveS diSCuSSion forum
Is there an interest in facilitating ongoing discussion of wood adhesives topics between these meetings? If so, how could it be realized? Please come share your thoughts.
InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada21
breakout SeSSionS, cont.friday, oCtober 11
7:00 – 8:15 am Continental Breakfast in the Niagara/Ontario Room
novel adheSiveS and reSin ChemiStry // ballroom a} traCk 2: StruCture, propertieS, and
modeling of Wood adheSive SyStemS // ballroom b
}
Introduction by Session Chairs Anthony Allen, Research Fellow, Ashland Water Technologies and Antonio Pizzi, Professor, University of Lorraine
Introductions by Session Chairs John Nairn, Richardson Chair in Wood Science and Engineering, Oregon State University and Peter Niemz, Head of Wood Physics Group, ETH
Daniel Yelle, Research Forest Products Technologist, Forest Products Laboratory
Elucidating How Phenol Formaldehyde Adhesives Bond To Wood Cell Walls Using High-Resolution Solution-State NMR Spectroscopy
8:20 - 8:45 am
Andreas Zillessen, Project Manager Adhesives, Fraunhofer Institute for Wood Research WKI
Microencapsulated PMDI Adhesives For Bonding Wood
Jan Vanerek, Ing. Ph.D., Brno University of Technology, Faculty of Civil Engineering
Modification Of Epoxy Adhesives Using Fibrous Reinforcement To Enhance Glue Ductility In Relation To Wood Adherends
8:45 - 9:10 am
Matthew Ellison, Director of Reactive Technology, Bioformix, Inc.
Novel Methylene Malonates and Cyanoacrylate Technologies - Key Advancements in High Speed, High Performance, Energy, Water and Formaldehyde Free Sustainable Adhesive Systems
Darren Riedlinger, Senior Analytical Chemist, Arclin
Particleboad Formaldehyde Emissions and Decay under Elevated Temperature and Humidity Conditions
9:10 - 9:35 am
9:35 – 9:55 am Break
VINAVIL…A global reach with a local touch
VINAVIL AmericasDeveloping new-generation polymer emulsions for industry
www.vinavil.com
VINAVIL Americas, Corp.1144 East Newport Center DriveDeerfi eld Beach, Florida 33442 Phone: 954-246-8888Fax: 954-246-8800Hemant Shah: [email protected]
Bond plywood with a wide range of moisture content without sacrificing performance with new RESI-BOND® Ultra and RESI-MIX® Ultra adhesives. Our customers value our products and services focused on performance and a relationship that goes beyond the immediate sale. We have an expansive wood adhesives portfolio and services coupled with a 50-year commitment to our customers’ success.
10058_1 WACP GP Chem Wood Adhesive HlfPg ad 082113.indd 1 8/22/13 10:31 AM
From building to designed environments, energy to
agriculture, Arclin applies advanced science and technology
to make engineered solutions that solve some of our most
complex product and environmental performance challenges.
The opportunity is yours.
877.689.9145 www.arclin.com
A Chemistry & Applications Company
Decorative Surfaces
Formaldehyde & Derivatives
Decorative Surfaces
Decorative Surfaces
Decorative Surfaces
Formaldehyde & Derivatives
Formaldehyde & Derivatives
24
novel adheSiveS and reSin ChemiStry // ballroom a} traCk 2: StruCture, propertieS, and
modeling of Wood adheSive SyStemS // ballroom b
}
Hao Zhang, Dr., Beijing Forestry University
Nanocrystalline Cellulose from Two Kinds of Materials Used for Improving Formaldehyde Emission and Bonding Strength of Urea-Formaldehyde Resin Adhesive
Charles Paul, Vice President - Technology, Henkel
New Hot Melts: Tailored Olefins for Laminating to Wood
9:55 - 10:20 am
Soo Jung Lee, researcher, Bio-energy Research Center Chonnam National University
Lignin-Phenol-Formaldehyde Adhesives With Residual Lignin From Hardwood Bioethanol Production
Manfred Dunky, Manager for Research and Application Technology, Kronospan GmbH
Influence Of The Degree Of Condensation Of Urea Formaldehyde (UF) Adhesives On The Penetration Into Wood Tissue And On The Shear Strength Of Adhesive Joints
10:20 - 10:45 am
Shin-ichiro Tohmura, Director, Forestry and Forest Products Research Institute
Effects Of Synthetic Process Of Melamine-Urea-Formaldehyde Resins On Chemical Structure Before And After Cure
Sardar Malekmohammadi, PhD Graduate research Assistant, University of British Columbia
Application of a Multiscale Modelling Framework in Reliability Analysis of Strand-Based Wood Composites
10:45 - 11:10 am
Yusuf Sudo Hadi, Lecturer, Bogor Agricultural University
Binderless Particleboard Resistance to Termite Attack
Lech Muszynski, Associate Professor, Oregon State University
Integrated Methodo For Multi-Scale/Multi-Modal Investigation Of Micro-Mechanical Wood-Adhesive Interaction
11:10 - 11:35 am
11:35 – 12:50 pm Lunch in the Niagara/Ontario Room
InternatIonal ConferenCe on Wood adhesIves 2013 In toronto, ontarIo, Canada25
breakout SeSSionS, cont.friday, oCtober 11
traCk 1: bio-baSed adheSiveS // ball-room a} traCk 2: StruCture and propertieS of
Wood adheSive SyStemS // ballroom b}
Introductions by Session Chairs Milan Sernek, Associate Professor, Dept. of Wood Science and Technology, University of Ljubljana and Charles Shuster, Franklin International
Introductions by Session Chairs Martin Feng, Principal Scientist, FPInnovations/Adjunct Profressor, University of Toronto and Byung-Dae Park, Associate Professor, Kyungpook National University
12:50 – 12:55 pm
Milan Sernek, Professor, University of Ljubljana
Bonding of wood with liquefied wood and analysis of the structure of formed bond line