CONDOR CLASSIC Design pressure up to 21 bar Steam production from 1.500 to 15.000 Kg/h STEAM FIRE TUBE INDUSTRIAL BOILER ITALY S.R.L. Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG) Cod. Fisc. / P.IVA 04024170161 REA: BG-428870 www.industrialboileritaly.com - [email protected]Tel: +39 035 0521398 Fax: +39 035 0521 443
6
Embed
CONDOR CLASSIC - Industrial Boiler Italy · CONDOR CLASSIC Design pressure up to 21 bar Steam production from 1.500 to 15.000 Kg/h STEAM FIRE TUBE INDUSTRIAL BOILER ITALY S.R.L. Offices
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
CONDOR CLASSIC Design pressure up to 21 bar
Steam production from 1.500 to 15.000 Kg/h
STEAM
FIRE TUBE
INDUSTRIAL BOILER ITALY S.R.L.
Offices and Production Unit: Via E. Fermi, 64/66 - 24050 GRASSOBBIO (BG)
Standardkessel’s Condor Classic steam boiler is a pressurized boiler, three pass design with a completely wet back.
It has been especially designed for the combustion of both liquid and gaseous fuels and it is supplied with the all accessories according to the currently norms for an automatic functioning.
The Condor Classic fascinates for its simplicity and the maintenance does not request any dismounting.
The steam boiler has been designed according to the most advanced techniques by highly qualified personnel in our factory.
The tube plates are manually drilled at cold in order to maintain physical characteristics of the material.
The construction is performed according to the European directive P.E.D. 97/23/CE with calculations code VSG rev. ‘95.
All joints are accurately electric welded and are executed with manual/automatic process. Those weldings are also certified EN288/3.
Description More over, the following non destructive controls are made with presence of a certified inspector:
Ultrasonic test on the combustion chamber inspection hole
X-rays on the crosses and weldings
Penetrant liquid on the corner weldings
The exchange area is particularly vast in order to maintain low specific thermal loads and high efficiency even during high rate continuously.
The particular position of the smoke tubes around the fire room ensures a fair distribution of the smokes.
The smoke tubes are internally smooth and free from any loose turbulator to facilitate easy maintenance ensuring also a constant high speed which avoids the soot residues, involving thus a constant efficiency.
The steam boiler Condor Classic has been famous for over 40 years for its strong construction and long working life.
Condor Classic are particular for:
Oversized and totally wet exchange surface
Low thermical load
No turbulators
Manual drilling on the smoke tube plates to maintain the physical characteristics
Hole reaming on the smoke tube plates
Expanding smoke tubes
Perfect adaptability for the liquid and gaseous fuels
High and constant thermal efficiency
Easy maintenance.
STEAM
CONDOR CLASSIC
Boiler versions
STANDARD VERSION
Steam boiler Condor Classic in standard version with 3 pass design.
ECO VERSION
Steam boiler Condor Classic with ECONOMIZER for the preheating of the water inlet. This version is supplied with a modulating regulation.
PRE-HEATER VERSION
Steam boiler Condor Classic with PREHEATER for the comburent air preheating. With this version the burner is supplied with a separate fan.
STEAM HEATER VERSION
Steam boiler Condor Classic with STEAM HEATER for the production of superheated steam. We can add to this version an ECONOMIZER or a PREHEATER.
STEAM
CONDOR CLASSIC
Equipments
Pos. Description Pos. Description
1 Water level limiter electrocode 13 Feedwater pump check valve