Condition Monitoring Forum Qatar 2015

Organized by:

visit our website: www.fleminggulf.com

27 - 28 May 2015Oryx Rotana, Doha, State of Qatar

The

Condition M nitoring Forum

SuppOrted By

Abhinav MishraConference ProducerFleming Gulf Conferences

Dear Participant,

On behalf of Fleming Gulf, we would like to welcome you to, The Condition Monitoring Forum

We have carefully selected top industry experts to speak at this event, giving you the opportunity to hear first-hand experiences and share solutions for overcoming the latest challenges in the field.

through presentations and interactive panel discussions, we are bringing together industry experts and thought leaders to address and discuss the strategies for the condition monitoring industry in the Middle east.

We hope that your attendance at this Fleming Gulf Conference is just the beginning of our business relationship and that we will have the opportunity to make a continuing contribution to your companys profitability and success.

If you would like to offer any comments related to the content or format of the program, or would like to contribute to a future platform we would be very pleased to hear from you. to that end, we ask that you kindly fill up and return the conference evaluation form.

thank you for attending and hope to see you again.

Best regards,

Alphy NanganiConference CoordinatorFleming Gulf Conferences

27 - 28 May 2015 | oryx rotana, Doha, state of Qatar

The Condition Monitoring Forum

Listed below are some administrative details for your information.

1. the Coffee Breaks will be held in the executive lounge next to Topaz A&B Ballroom and Lunch will be served in the Choices Restaurant located on the 1st floor. If you have any dietary requirements please inform our registration desk during the first coffee break.

2. the Networking Cocktail Reception will take place in the executive lounge next to Topaz A&B Ballroom, at after the end of conference on day 1 on 27th May 2015.

3. Name tags have been provided to help you identify fellow delegates. easy identification also helps the conference staff when delivering messages.

4. please do not be late after breaks as we have a very intensive program and our Chairman will do his best not to delay the beginning of each session.

5. If you have questions - please wait until the end of the presentation. the Chairman will give you an opportunity to ask your questions. do remember to introduce yourself by name and company.

6. please keep your mobile phones on silent mode during the session, messages can be taken at the registration desk.

7. please do not forget to fill up the Conference Evaluation Form and return it at the Registration Desk. It will be a great help in enhancing our upcoming events.

If you have any queries before, after or during the conference, the Fleming Gulf team would be more than happy to assist you.

the conference presentation links will be emailed to all participants and can be downloaded. these presentations are not for sale and have no commercial value.

Fleming Gulf recognizes the intellectual property rights of speakers over the transcribed material. No reproduction of any part may take place without the written permission of relevant speaker.

27 - 28 May 2015 | oryx rotana, Doha, state of Qatar


Gold Sponsor

Innovative technology partner

Associate & Lunch Sponsor

Workshop LeaderAssociate Sponsor

Media partners

27 - 28 May 2015 | Oryx Rotana, Doha, State of Qatar


8.00 reGIStrAtION ANd COFFee

8.50 WeLCOMe AddreSS By FLeMING GuLF

8.55 OpeNING reMArkS FrOM the ChAIrMAN Prof Leonid Gelman, Chairman, International Scoiety of Condition Monitoring, United Kingdom

9.00 KEYNOTE: Condition Monitoring (CM) Best Practices to Reduce Machinery Failure EliminatingrandomcausesofmachineryfailureusingbestCBM

practices

HighlightingthekeychallengesanditssolutionsinusingCM

Mentioningthekey-takeawaysfromthebestpracticesVimalendu Tripathi, head of reliabilityQatar Petroleum, Qatar

9.30 KEYNOTE: Condition Monitoring of Rotating Equipments Preventing Premature Failures Preservingthefunctionality&mitigatingtheconsequencesof

failure for rotating equipments

Listingthecriteriatoevaluatethecost-effectivenessofconditionmonitoring

SelectingtherightCMtechniqueforpumps&centrifugal,reciprocating compressors

Prof Leonid Gelman, Chairman, International Scoiety of Condition Monitoring, United Kingdom

10.00 Integral Monitoring and Diagnosis of Rotating Electrical Machines and Associated Mechanical Engines Discussingnoveltechniquesforthemonitoringanddiagnosisof

electrical machines (hV motors and generators) and connected mechanical engines

Allowingearlywarningsonriskfactorsdevelopingduringoperation and permits diagnosis and maintenance on demand

Dr. Bernhard Fruth, CeO, Quartzelec, MalaysiaDr. Detlef Hummes, Assistant professor American University of Kuwait (Works with Quartzelec), Kuwait

10.30 teA/COFFee BreAk

11:00 Principles of Vibration First Step To Be a Good Data Collector/Analyst Understandingamplitude(Peak,Peak-to-Peak,RMS)&an

introduction to phase

Discussingonvibrationunits&overalllevelreadings

Introducingspectrum&timewaveform(ComplexVibration)Kareem Magdy, Condition Monitoring expert, BAPETCO, Egypt

11.30 CASE STUDY: Extruder Gear Box Ensuring Smooth Running Through Condition Monitoring Takingastockofthesituationwithoilanalysisandthe

highlighted problems in the report

Handlingincreasedvibrationandensuringnormal&acceptedlevels

SharingandunderstandthedatafromthereportsMohamed Kandil, Condition Monitoring Specialist, QAPCO, Qatar

12.00 CASE STUDY: The Benefits of Flexible Condition Monitoring Sharingtheexperiencesfromvasriouscasestudiesonflexible

condiiton monitoring

Listingexamplestohelpunderstandtheconceptsbetter

Discussingimplementationofthesetechniquestoavailthebenefits

Nicolas Bleret, Global Business director, Wi-Care, Belgium

12.30 LuNCh SpONSOrS:

13.30 Panel Discussion: Return of Investment (ROI) on Condition Monitoring JustifyingtheROIonconditionmonitoringhighlightingitasa

cost-effective & result oriented method

Recordingthesuccessoftheprogramandkeepingoptionsopen to use other technologies as the demand arises for better results

Moderator: Leonid Gelman, Chariman, International Society of Condition Monitoring, UKPanelists: Vimalendu Tripathi, head of reliability, Qatar Petroleum, QatarMohamed Kandil, Condition Monitoring Specialist, QAPCO, QatarSadok Sassi, Condition Monitoring program Manager Qatar University, Qatar

14.00 Human Reliability - Managing Human Variable Focusingoneoneofthemostimportantaspectofanyreliability

program skilled professional

Managingtheworkforcetoensureasuccessfulreliabilityprogram

Utilisingtheavailableworkforceinanefficientmannertomeetthe goals

Faruq Khalifa, team Leader reliability, Saudi Aramco, Saudi Arabia

14.30 Aero / Aero Derivative Gas turbines Condition Monitoring AssetManagementProgramandAdvancedCondition

Monitoring technology use in Aero / Aero derivative Gas turbines

OnlineOilAnalysisforGasTurbines.UnderstandingtheTrends

CanAdvancedConditionMonitoringAvoidFailures(CaseStudy)

Syed Nadem Ahmed, Maintenance & reliability expert, Qatar

15.00 teA/COFFee BreAk

15.30 Journal Bearing Analysis Theory of Analysis Analyzingthejournalbearingstheoryofoperation

Trackingagoodvibrationsignalfromajournalbearingtoensure proper health running

TracingthemostpopulartypesofbearingsfailureKareem Zaghloul Mohamed Ibrahim, Sr. Condition Monitoring engineer, Qatar Steel, Qatar

16.00 Condition Monitoring of Damaged Bearings By Vibration Discussingthechangesintechnologyassocitedwithbearing

manufacturing

Listingthecomponenetsofbearingsandtheassociatedfailures

Talkingabouttheoriginofbearings&vibrationSadok Sassi, Condition Monitoring program Manager Qatar University, Qatar

16.30 CLOSING reMArkS FrOM the ChAIrMAN

16.45 NetWOrkING reCeptION & COCktAIL

DAY 1 | 27th MAY 2015



WORKSHOPDAY 2 | 28th MAY 2015 8.00 reGIStrAtION ANd COFFee

9.00 WORKSHOP 1 - Implementing an oil analysis and lubrication program for cost effective long term reliability

WORKSHOP LEADER:Dr. Sunil Kumar, Laboratory ManagerGeo-Chem Middle East, UAE

Theoilanalysis&lubricationprogramisoneofthekeyconditionmonitoringpracticeswhichhavegivenexcellentresultstoorganizationin meeting their reliability & maintenance goals.

Theworkshopwillgiveyouin-depthknowledgeabouttheadvantages,methods&bestpracticesthatwillhelpyouimplementthesamesuccessfully in your organization.

WHO SHOULD ATTEND:-

ConditionMonitoringManagers

ReliabilityHead/Managers

ConditionMonitoringEngineers/Specialists/Experts

ConditionMonitoringTechnicians

ReliabilityEngineers/Specialists/Experts

MaintenanceEngineers/Specialists/Managers

10.30 COFFee BreAk

11.00 WORKSHOP 2 - Experiences with data analytics in condition monitoring: how Big are your data?

WORKSHOP LEADER:Koenraad De Bauw Chief technologist Vibrations & MechanicsLabrolec, Belgium

WHY ATTEND:

For many critical assets, a multidisciplinary condition monitoring approach is required. Centralizing data and measurement results is however not the unique solution. We need to bring together the expertise behind the data.

An intelligent combination of the information issued by the available condition monitoring techniques, process data and inspection reports opens many opportunities for improving the capability of early warning of deviating behaviour of your assets.

ABOUT THE WORKSHOP:

In a first part of this workshop session we will present some experiences with a more global condition monitoring approach, and on how they did (or did not) contribute to a more reliable operation and an optimization of maintenance. In a second part of the workshop we will elaborate on some key messages through an interactive Q&A.

GOAL OF THE WORKSHOP:

the goal of this workshop is to identify key success factors and pitfalls for an efficient introduction of data analytics and model-based techniques in condition monitoring. Many powerful approaches for data mining exist in what is today generally called Big data analysis, but we sometimes risk to forget the exact objectives when applying such methods in condition monitoring or asset management. the tools must be adapted to the job, and not the other way around.

12.30 LuNCh SpONSOrS:

1.30 eNd OF FOruM



SPEAKER PROFILES:-

Vimalendu Tripathi, head of reliability Qatar Petroleum, QatarVimalendu is the Head of Reliability with Operations Engineering, Qatar Petroleum, Dukhan. He is a Mechanical Engineer, MBA (Fin), Certified Reliability Engineer (CRE), Certified Maintenance & Reliability Professional (CMRP) and Certified Vibration Analyst Cat - III. The guest speaker has 25 years of varied experience in plant asset management - Reliability & Performance Monitoring,

Condition Monitoring, Operations & Maintenance, Projects and Commissioning with expertise in Rotating equipment, Reliability & Performance Monitoring, Condition Monitoring, Reliability Centered Maintenance(RCM) and Root Cause Failure Analysis(RCFA) etc. In his career he has worked with many companies of repute like Qatar Petroleum, Dubai Petroleum, Petrofac, Oman Plants Services Co. (OPSC), Saudi International Petrochemicals Co. (Sipchem), Indian Petrochemicals Company Ltd (IPCL)/Reliance, Haldia Petrochemicals and National Thermal Power Corporation (NTPC). He has delivered presentations on various topics related to Maintenance, Reliability & Condition Monitoring, conducted workshop on Managing Aging Assets and training's on Reliability in various Conferences, Forums & Organizations.

Leonid Gelman, Chariman, International Society of Condition Monitoring, UKLen Gelman, Professor and Chair of Vibro-Acoustic Monitoring; the Chairman, International Society of Condition Monitoring; Co-Chairman, Condition Monitoring Technical Committee of British Institute of NDT, the Honorary Editor of the International Journal of Condition Monitoring, President of the International

Institute of Acoustics and Vibration (USA). He has more than 35 years experience in advanced maintenance planning and scheduling, reliability centred maintenance, machinery failure analysis and prevention, risk assessment, hazard identification and condition monitoring of complex mechanical systems (e.g., rotating, reciprocating machinery, gearboxes, bearings, etc.) both in industry and academia. Len is Chief Designer on numerous industrial and research maintenance contracts, including contracts from the USA National Academy of Sciences, USA National Research Council, USA International Science Foundation, USA Civilian Development Foundation (twice), USA MacArthur Foundation, Lady Davis, Israel, Centro Volta, Italy, UK EPSRC, UK Department of Trade and Industry (three times), UK Royal Society, Rolls Royce (four times), SKF (two times), Scottish Energy (two times), Caterpillar (twice) and Boeing (three times). Recently, he used to work for oil and gas industry under a maintenance contract with Shell (UK). Len is a Fellow of the British Institute of Non-Destructive Testing (BINDT), UK Institution of Diagnostic Engineers and International Association of Engineers. Len is the author of over 200 publications (including 17 patents and 2 book chapters) and 17 keynote conference papers in the area of advanced maintenance planning and scheduling, maintenance and machinery failure analysis and prevention and monitoring.

Dr. Bernhard Fruth, CeO, Quartzelec, Malaysia Studied Electrical Engineering (Dipl.-Ing. 1981) and made his PhD in High Voltage Technologies (Dr.-Ing. 1986) at the University of Technology, Aachen, Germany. From 1987 1992, he was Manager of the High Voltage Systems Group at ABB Corporate Research, Baden, Switzerland, where he worked on gas insulated switchgear, SF6 breaker development, solid and gaseous insulating materials and

diagnostics for high voltage equipment. In 1988 Dr. Fruth developed the first commercial partial discharge pattern recorder. He has entrepreneurial activities in the field of rotating machine diagnostics/partial discharge testing and monitoring systems and was Managing Director and CTO of PD Tech Power Engineering AG, Switzerland. He is now the Chief Executive Officer of Maser Quartzelec Services Sdn Bhd, based in Kuala Lumpur Malaysia, since 2011. He has published more than 60 papers and contributions to international conferences and has been a member of the IEEE and IEC working groups. He is a member of ELECTROSUISSE and Swiss Engineering Society.

Dr. Detlef Hummes, Assistant professor, American University of KuwaitDr. Detlef Hummes received his doctorate degree in Electrical Engineering from the Gerhard-Mercator-University of Duisburg, Germany, in 1997. In his thesis he developed a Differential Mobility Analyzer for particles in the nanometer size range, known as the Nano-DMA. The device got an US Patent. The device is produced and distributed by the global operating company TSI. From 1997 until 2000 he

was the technical director of a wind turbine manufacturer that produced off-grid systems. Between 2001 and 2004 he worked as a patent agent for the Fraunhofer Patentstelle and the Provendis GmbH, both in Germany. Since 2004, he has been a consultant for international companies in the power sector. Prior to 2010, he was a part-time lecturer at the German University, South-Westfalia, at the department of Mechatronics and Electrical Engineering. Since 2013, he has been an Assistant Professor of Electrical Engineering at the ECE department, the American University of Kuwait. His research interests include renewable energy, based on wind turbine and photovoltaic for off-grid-systems with a focus on energy efficiency. He has several publications, in addition to European patents. Dr. Hummes is a member of a number of national and international scientific organizations.

Faruq Khalifa, team Leader reliability - Saudi Aramco, Saudi ArabiaFaruq Khalifa is currently working as a Reliability Group Leader working for Aramco Yanbu Refinery. He has 18years of experience related to Reliability Engineering & Operation Excellence, where he worked or Shell Canada and .Cenovus Energy. Faruq is also a Licensed Professional Engineer .Eng from Alberta, Canada. He also holds Maintenance Management Professional MMP certification from PEMAC,

and Certified Maintenance Reliability Professional CMRP. He currently lives in the Kingdom of Saudi Arabia.

Syed Nadem Ahmed Maintenance & reliability expert, QatarDiverse professional engineering experience of more than 25 years in various industrial sectors including Aviation, Power Plants and Petrochemicals. His Key Specialties in Consulting , Training & Development as a Mechanical Power Engineer includes

Process,PowerGenerationPlants&Aviation

LifecycleAssetManagementStrategies,

AssetManagementStandardsImplementations

RCM based Maintenance & Reliability Program development andimplementation.

ReliabilityAnalysis&RiskBasedStudies.

RemainingLifeAssessmentStudies,Evaluation,ExtensionRecommendations

Work-scopeOptimizationonAeroandAeroderivativePowerPlantTurbomachinery Maintenance Repair & Overhaul

ThermalandCCPPPowerGenerationPerformanceEvaluation

Critical/RotatingEquipmentPerformance/FunctionalReliability&SpecificEquipment Plans

Plant,EquipmentFailureAnalysis,RBDModeling,FMECA,RCMProgramImplementation

RAM/RCMStudyforPlants,Units,Systems.

Focused Lean Six Sigma Certifications for Maintenance and ReliabilityProfessionals.

Well versed with RCM Tools & Softwares Weibull 6++ , Minitab andStatistica.



Mohamed Kandil, Sr. Condition Monitoring Specialist - QAPCO, QatarMr. Mohamed has worked about 13 years in Gulf of Suez petroleum company in Egypt (joint venture with BP Company) & last 6 years as condition monitoring Dept. Head, then from Jun.,2009 working in Qatar Petrochemical company (QAPCO) as condition monitoring Sr. Specialist. The plants that come under his purview include:- Ethylene plants which is included sulfur units,

Ethylene units & Cracked gas Units. Polyethylene plants ( LDPE & LLDPE ), Utilities plant. He is responsible for all rotating equipment condition monitoring. Reviewing & Evaluating The Rotating & Reciprocating Machines Conditions with Standard Levels To Extend Their Life Time & Increase The Reliability. Working With Maintenance In Plant S/D Activities. Working In Start Up & Commissioning For new Plants (Qatofine & LDPE 3). Following Up on The Lube Oil Analysis For All Machines. Reviewing The Lube Oil Specification To Meet The Equipment Manufacture Requirements. Online Vibration Follow Up Through System 1 For Critical Rotating Equipment. Online vibration follow up through Prognost for reciprocating Equipment. Participating with reliability team in RCA reports. Daily, Weekly, Monthly & Annual Reports For Condition Monitoring Status Of Our Rotating & Reciprocating Equipment.

Nicolas Bleret, Global Business director, Wi-Care, BelgiumGraduated as an electromechanical engineer, Nicolas Bleret entered the condition monitoring business right out of school 14 years ago. After 6 years as a field service engineer in vibration analysis, oil analysis, infrared thermography, balancing, alignment, etc. he joined I-Care. He helped the young Belgian service company to become a full international condition monitoring specialist with a focus on innovation. Nicolas grew with the company

from team leader, to country director and now international business director managing and training an international team of vibration engineers spread over Europe, Asia and the MENA region.Recently, Mr Bleret is focused on the global business development of their new innovative product Wi-care and their latest delivery model: The remote expert analysis in a minute anywhere, anytime.

Kareem Magdy, Condition Monitoring expert BAPETCO, EgyptKareem Magdy started his career in 2008 as a Mechanical Maintenance Engineer in BAPETCO Shell Global Joint Venture in Egypt responsible for applying preventive & corrective maintenance plans for all rotating & Static equipment including Pumps, Compressors, Gas Turbines, Gas & Diesel Engines, Valves. In May 2013 he was assigned by Shell to work as Sr. Commissioning Coastal

Engineer for Petroleum Development of Oman. He moved again to BAPETCO to work as Operation & Startup Readiness Engineer in CRP (CO2 Removal Plant) Project. He is also engaged in Pre-Commissioning, Commissioning and Start Up activities.

Dr. Sadok Sassi, Condition Monitoring program Manager, Qatar University, QatarDr Sassi is a Canadian PhD, expert in vibration analysis and troubleshooting of mechanical installations and equipment. He delivered many courses and workshops in his field of specialization worldwide and in Gulf region. Throughout his 28-years career he occupied different positions in university and industry. He supervised several Masters and PhD degrees. He published more than 30 papers and technical

reports in the major international journals and conferences. He is currently conducting research on different areas of mechanical engineering and industrial maintenance. His most significant contributions are perhaps:

Development of powerful software called BEAT to simulate the vibrationbehavior of damaged ball bearings.

DesignofintelligentdampersfortheoptimumcontrolofcarsuspensionsDesignofnon-pneumaticairlesstire,forasaferridewithouttheriskofblowout

Kareem Zaghloul Mohamed Ibrahim, Sr. Condition Monitoring engineer, Qatar Steel, QatarKareem is working with Qatar Steel as a Senior Condition Monitoring Engineer since 2011. He has completed his Mechanical Engineering from Alexandria University in June 2004.

His responsibilities include:

Completeinitiationandsetupofplants(DRI,RollingMills,MeltShop,Utilitiesand LCP) rotary machines on MHM system.

Surveying all rotating machines using all of vibration techniques such asspectral, wave form, phase and orbit analysis and all of advanced dual channel techniques.

On line monitoring for DRI compressors and fans machines from BENTLYNEVAD 3500 system.

OnsitefieldbalancingforallplantdustcollectionfansusingCSIbalancingkit. Following up all maintenance activities for most of the rotatingmachines

monitored.LinkingourcorrectionrecommendationstooracleERPsystemasworkrequests

and work orders.He is a certified Level 1,2, 3 ISO & ASNT vibration analyst from the Mobus Institute along with a host of other courses making him a subject matter expert.

Dr. Sunil Kumar, Laboratory Manager, Geo-Chem Middle East, UAEDr. Sunil Kumar, Laboratory Manager at Geo-Chem Middle East in Dubai, one of the largest commercial labs in the region, is a senior research scientist with over 10 published research papers in international journals. Dr. Sunil holds a Ph.D in Chemistry from Barkhatullah University in Bhopal, India, for his research on Internal Recycling of Nitrogen and Phosphorus in relation to Eutrophication of two fresh

water bodies of Bhopal. As Geo-Chem Middle Easts laboratory Manager, he manages and supervises the overall activities of a full-fledged ISO 9001 certified and ISO/IEC 17025 accredited lab. He has more than 15years of experience in oil field analysis and his counsel is sought-after for blue chip clients in the oil and gas sector on various subjects related to research and development, and quality control. He is experienced in Gas Chromatography, ICP, XRF, AAS, Spectrophotometer, FTIR and GCMS, among others. Dr. Sunil regularly takes part in industry conferences and has presented papers on oil condition monitoring and lube oil monitoring at prestigious international seminars.

Koenraad De Bauw, Chief technologist Vibrations & Mechanics, Labrolec, BelgiumKoenraad De Bauw joined Laborelec in 1993 in the Structural Mechanics department, where he worked for 5 years on field analysis of vibration problems, mainly on large turbomachinery. After a 1-year period in the Electrical department working on high voltage protections he returned to the Structural Mechanics division in 1999. From 1999 to 2014 he held a position as Technology Manager

Vibrations and Mechanics within the Structural Integrity Assessment and Monitoring department of Laborelec. Within this position he was responsible for a team of 15 engineers with different activities in the field of structural dynamics and condition monitoring, mainly in the electrical power generation environment. Today he holds a position of Chief Technologist for the activities of vibration analysis, condition monitoring and structural mechanics. Besides a role as a senior expert for activities in his competence domains, he has as role in stimulating innovation and coordinating the technological interaction with other activity domains inside and outside the Laborelec organization.

WORKSHOP LEADERS:

SPEAKER PROFILES:-

Quartzelec, is a leading independent electrical engineering service provider and a technical authority in the field of HV electrical AC/DC motors and generators. We have established ourselves as a viable alternative to the OEM for the repair and maintenance of rotating electrical machines, during or after warranty. Quartzelec provides a comprehensive range of field services or workshop based repair on a worldwide basis, having strategically located facilities in the Middle East, Asia and Europe as well a team of professional engineers who can be quickly mobilised; all highly experienced in working with machines of any OEM manufacture. Leveraging upon this extensive capability and know-how has allowed Quartzteq (a Quartzelec company) to develop a range of supporting products and services including our sophisticated condition monitoring system Lifeview, specifically designed to evaluate the health of your rotating electrical assets. Quartzteqs state-of-the-art solution for monitoring the health of your HV motors and generators is both simple to install and cost effective to utilise. Suitable for generator and motor applications; the Lifeview solution sets new standards for the monitoring of electrical machines based on field-proven sensor technology.

Gold Sponsor

Innovative Technology Partner

i-caretM and Wildcat are proud to introduce the Wi-careTM wireless condition monitoring system. Thanks to more than 10 years of industrial experience in condition monitoring, the Wi-careTM system has been developed to monitor vibration spectra and temperature, accurately, safely and cost effectively in inaccessible locations and extreme conditions. Wi-careTM, designed and built 100% by I-Care in Belgium and distributed in Qatar, UAE and Egypt by Wildcat, provides an alternative solution to manual data collection or temporary online monitoring. Wi-careTM offers the highest diagnosis capabilities and reduces non value-added costs of mounting, cabling and travel costs.As Wi-careTM is compatible with the vast majority of Industry standard vibration sensors, it will provide a wireless solution in less than a minute! Wi-careTM 24/7 remote diagnosis services represent a very flexible solution allowing you to receive maintenance recommendations through periodical or on event data analysis.

Gold Sponsor

Workshop Leaders

Geochem - International Independant Inspection & testing services is an independent inspection and testing company having its presence around the globe at strategic locations covering a wide range of business sectors with the Middle East regional headquarters in Dubai. Geochem Middle East is ranked amongst Dubai SME 100 company, the premier ranking of Dubais 100 top performing enterprises, launched by Dubai Government.The Middle East headquarters is based in Dubai with an ISO 17025 accredited laboratory having state of the art infrastructure in accordance to the international standards with the latest and most advanced instruments providing one stop solution for all testing needs across various industry segments.

laborelec is a leading research and competence centre in electrical power technology. It was established in 1962 in order to support Belgian electricity companies with research, development, and specialized services. Today, it is part of GDF SUEZ, a world leader in energy. Our competences cover the entire electricity value chain: generation, transmission, distribution, storage and end-use. We offer specialized research and services in each of these domains, to companies in all parts of the world. Our headquarters are located near Brussels, and we also operate branch offices in the Netherlands, in Germany and in the Middle-East and a subsidiary in Chile.. Laborelec collaborates intensively with the other research centers of the GDF SUEZ Research & Technologies.

Vibrant Machines for Technical Services is an ambitious provider of products and services in the field of engineering established in 2012, emphasizing on the predictive maintenance technologies and reliability. It became a recognized name in GCC & Middle East in providing high level of vibration analysis and thermal imaging services for both rotating and stationary equipment. In parallel to that, it represents many worldwide leading companies in the fields of: condition monitoring, ultrasonic application, noise and acoustics, dynamic modeling and root cause analysis. Products chain covers all kind of mechanical, electrical and instrumentation equipment and devices for light and heavy industries. The main asset of Vibrant Machines is the highly educated and expert team which makes them the right choice for many training and development courses, consultations and technical support.

Associate Sponsor

BarraK al-Fares has been actively involved in the industrial scenario in the kingdom for over 9 years now. We are supplying products, customized solutions, and specialized engineering services for the complete reliability needs of oil refineries, petrochemical plants, chemical plants, desalination plants, power plants, Gas Plants etc. Instrument for Laser Alignment System, Thermography, Torque Wrench & Hydraulic Tools, Ultrasonic Inspection, Turbine and Machine Tool Alignment, Straightness Flatness Application Etc. Our principal office is based in Dammam, Saudi Arabia. We have expanded our operations in all Middle East countries like Bahrain, Qatar, UAE, Kuwait, Oman etc. In addition we are specialized in long term manpower supply for the construction, maintenance and Inspection needs of plants. We strive to maintain a high level of after-sales service for both repairs and spare parts. We have a well trained team of engineers to perform services for condition monitoring and other reliability needs of plants.

Associate and Lunch Sponsors

sieMens: LMS Simulation and Test Solutions help manufacturing companies manage the complexities of tomorrows product development by incorporating model-based mechatronic simulation and advanced testing solutions in the product development process. Our products and services tune into mission-critical engineering attributes -- ranging from system dynamics, structural integrity and sound quality to durability, safety and power consumption. LMS products also address the complex engineering challenges associated with intelligent systems in the automotive and aerospace industries as well as in other advanced manufacturing industries. Visit http://www.siemens.com/plm/lms

inspectioneering is your trusted source for information related to asset integrity management in the O&G, Chemical, and Petrochemical industries. Since 1995, Inspectioneering has dedicated itself to helping engineers and inspection professionals around the world keep their assets operating safely and reliably. Learn more at www.inspectioneering.com.

refinerlink offers a one-stop shop for oil refiners around the world to connect and efficiently leverage communal knowledge. From news and industry event listings, to job postings, blogs, employee surveys, and community forums, RefinerLink delivers an exceptionally clean platform that consolidates top notch oil refining content.

eye of riyadh is a city marketing portal that provides media and marketing solutions servicing to both local and international clients, and support major events through sponsorship, organizing, and marketing services such as:Email campaign, Banner advertising, Email Newsletters, Social Media Campaign, SMS Campaign, Training & Events Professional Listing, Prominent Business Listing, Classifieds, Job Search, Public Relations Services, Web Design & Development Services,Advertising, Media and Graphic Design. http://www.eyeofriyadh.com/

the oil & Gas Year (toGY) is a comprehensive and exclusive yearly book gathering interviews with the key stakeholders of the international energy industry, country by country, and featuring in depth articles, analyses and resources to present a clear picture of worldwide oil and gas industries and their associated sectors. Behind every company growth paths, every major projects and every outstanding partnerships, there are ideas, visions and hopes. Nurturing and pursuing them are people who provide the true energy of success: visionary executives, driven stakeholders, focused managers or talented diplomats make up the oil and gas industrys successes alongside the development of its affiliated sectors, from finance to transportation, refining and retail through to engineering and construction.

Worldoils is a company that combines the power of marketing as well as the in-house expertise for the Oil, Gas, Offshore and the Maritime industries.Worldoils web portal www.worldoils.com has become a truly central platform for visitors who need information regarding oil and gas products and services, research, training, conferences, news and events as well as a popular advertising base for providers of Oil, Gas, Marine and Offshore services. Worldoils has also launched the jobs system and a marketplace. In the recent months, Worldoils has strengthened its position as a fast developing central place for buying and selling of land rigs, offshore rigs, barge rigs and other oilfield and subsea equipment.

energy has no doubt become one of the most fundamental elements, this element ENERGY is the domain of www.theenergyinfo.com. The unmatched quality with its profound understanding in the energy sector, makes www.theenergyinfo.com THE SUPERLATIVE intelligent information source of choice for companies involved & looking for business opportunities in the Oil & Gas, Petrochemical, Power, Refinery, Pipeline & Water sectors.

Media Partners

Supported By

the international society of Condition Monitoring (isCM): Bringing Together The International Condition Monitoring CommunityThe ISCM is an international forum for professional engineers and scientists engaged in research, development and best practice in condition monitoring. Its purpose is to bring together an international community with the common aim of achieving excellence in the development and practice of condition monitoring and related diagnostic technologies. The ISCM achieves its aim of bringing the condition monitoring community together through:

Aworldwidenetworkforinterchangeofknowledge

Encouragingandsupportingnationalandinternationalseminars and conferences

Ahigh-levelonlinejournal

Providinginputintothedevelopmentoftrainingand

qualification programmes

Contributingtothedevelopmentofinternationalstandards

Encouragingandsupportingpublishinginitiatives

Liaisonwithothernationalandinternationalbodies

visit our website:

www.fleminggulf.com

Strategic Insight focusing on Scheduling and Planning

17 18 November 2015 | State of Qatar

5

Held under the Patronage of H.e Mohammed Bin saleh al-sada, Minister of Energy & Industry and Chairman of Qatar Petroleum

Alan Warmack, International Plant Shutdown and Turnaround expert, U.S.A

SABIC, ZADCO, Indian Oil, Marafiq and many more

Top Senior Delegation from Qatar Petroleum

200+ Attendees

20 Speakers & Panelist

10 International Speakers

2 Masterclass Session

Key HigHligHts of 4tH AnnuAl PlAnt sHutdown And turnAround forum 2014 :

UNITED ARAB EMIRATES:

Fleming Gulf FZedubai Airport Free Zonep.O. Box: 54772, dubai uAe

tel: +971 4 609 1555Fax: +971 4 609 1589Email:[email protected]

BANGALORE INDIA:

Fleming Gulf India Ltd286&287,AmarJyothiLayoutdomlur, West Wings, Bangalore 560071, India


PUNE INDIA:

1st Floor, Marisoft IMarigold, kalyani Nagar pune 411014Maharashtra, India


KUALA LUMPUR MALAYSIA:

Suite 3B-6-7, Block 3B plaza Sentral,JalanStesenSentral5,50470 kuala Lumpur, MALAySIA

tel: +603 2272 5319Fax: +603 2272 5350Email:[email protected]

#CMFQATAR15www.slido.com

LOGIN BY ENTERINGTHE EVENT CODE

Condition Monitoring Forum Qatar 2015

Documents

end of conference

conference staff

behalf of fleming gulf

fleming gulf team

conference evaluation

condition monitoring

conference presentation

oryx rotana