Unipart Rail Infrastructure Catalogue C o n c r e t e a n d S t e e l S l e e p e r A s s e m b l i e s Sleeper Types(s) G44, EG47 for 56E1 rails G44, EG47 for 60E1/2 rails 560H for 56E1 rails Note:This sleeper is fitted with hook-in shoulder type 9482 560H for 60E1/2 rails Note:This sleeper is fitted with hook-in shoulder type 9482 EG49 for 56E1 rails EG49 for 60E1/2 F41 & EF36 F40 5F40 1. Standard toe-loads 2. Increased toe-loads 3. e-PLUS system 4. Pandrol ‘Re’ system HH10 (Mk 2), HH12, for 56E1 rails Shoulder types: • HH10 = shoulder 9922 • HH12 = shoulder 9482 HH10 (Mk 2), HH12, for 60E1/2 rails • HH10 = shoulder 9922 • HH12 = shoulder 9482 500 Series W402 Series HH10 (Mk1) for 56E1 rail Alternative assembly converting HH10 (Mk1) to FASTCLIP system using shoulder type 9922 The following obsolete sleepers may be converted to Pandrol ‘e’ clip assemblies: • F10 using BJB fastenings • RNB6 also known as KENITRA sleepers • HEYBACK sleepers Clip FC1504 with 8494 toe FC1504 with 8494 toe FC1504 with 8494 toe FC1504 with 8494 toe e2007 e2007 FC1501 with 8494 toe e1809 or Re1801-16 PR401A or e1809 e2001 eP20127 Re1609-re-railing only Re1801-7 loose sleeper FC1504 with 8494 toe FC1504 with 8494 toe FC1501 with 8494 toe PR401A or e1809 FC1504 with 8494 toe Insulators FIELD side: 8582 (Blue) GAUGE side: 8690 (Black) Both sides: 7751 (White) FIELD side: 8582 (Blue) GAUGE side: 8690 (Black) Both sides: 7751 (White) FIELD side: 10274 (Red) GAUGE side: 10275 (Yellow) Both sides: 5720 (Green) Both sides: 7751 (White) Both sides: 4452 (Blue), no separate insulator needed for ‘RE’ system 56E1 rail: Both sides: 724a (Orange) 98lb or 109lb rails: Both sides: 724a (Blue) 56E1 rails: Both sides:2433 (GRNWhite) or 6924 (HVN White) 56E1 rails: Both sides: 9132 56E1 rails: No separate insulator FIELD side: 8582 (Blue) GAUGE side: 8690 (Black) Both sides: 7751 (White) Both sides: 7751 (White) 56E1 rail: Both sides: 724a (Orange) Both sides: 8277 (Yellow) Pad Pad 6650, except: • Curves less than 400m radius, fit EVA type 8531 • Low line speed, fit EVA type 8531 Pad 8854, except: • Curves less than 400m radius, fit EVA type 9970 • Low line speed, fit EVA type 9970 Pad 8531 Pad 9970 Pad 5197 Pad 5197 Pad 6650, except: • Curves less than 400m radius, fit EVA type 8531 • Low line speed, fit EVA type 8531 Pad 4548 or Composite ‘RE’ system pad type 15946 Pad 5mm rubber, or 7.5mm rubber maintenance pad, or EVA Pandrol type 2061/3 Pad 5mm rubber or EVA pad type 2061/3 Pad 9286 Composite pad type 14229 Pad 8531 Pad 9970 Pad 8531 Pad 5mm EVA Pandrol type 2061/3 Pad 8531 Design Track Gauge 1436mm 1438mm 1436mm 1438mm 1436mm 1438mm 1435mm 1432mm 1435mm 1432mm 1432mm 1432mm 1432mm 1436mm 1438mm 1435mm 1435mm 1435mm Whilst conversions have been available and undertaken in large volumes in the past, the components are no longer readily available, generally regarded as uneconomic and anyone attempting this process should contact Pandrol directly for advice. This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305. Current CONCRETE sleepers Current STEEL sleepers Discontinued / serviceable older CONCRETE sleeper types Alternative assemblies for F23 to F27, EF28, EF29, EF33 sleepers Discontinued / serviceable older STEEL sleeper types Conversion of obsolete fastenings on very old concrete sleepers
5
Embed
Concrete and Steel Sleeper Assemblies - Unipart Rail Products.pdf · Unipart Rail Infrastructure Catalogue FINISHES Clips are available with either STANDARD or CORROSION PROTECTION
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Unipart Rail Infrastructure Catalogue
Concrete and Steel Sleeper Assemblies
Sleeper Types(s)
G44, EG47for 56E1 rails
G44, EG47for 60E1/2 rails
560H for 56E1 railsNote:This sleeper is fitted with hook-inshoulder type 9482560H for 60E1/2 railsNote:This sleeper is fitted with hook-inshoulder type 9482
Pad 6650, except:• Curves less than 400m radius, fit
EVA type 8531• Low line speed, fit EVA type 8531Pad 8854, except:• Curves less than 400m radius, fit
EVA type 9970• Low line speed, fit EVA type 9970
Pad 8531
Pad 9970
Pad 5197
Pad 5197
Pad 6650, except:• Curves less than 400m radius, fit
EVA type 8531• Low line speed, fit EVA type 8531Pad 4548 orComposite ‘RE’ system pad type 15946
Pad 5mm rubber,or 7.5mm rubbermaintenance pad,or EVA Pandrol type 2061/3Pad 5mm rubber or EVA pad type2061/3
Pad 9286
Composite pad type 14229
Pad 8531
Pad 9970
Pad 8531
Pad 5mm EVAPandrol type 2061/3Pad 8531
DesignTrack Gauge
1436mm
1438mm
1436mm
1438mm
1436mm
1438mm
1435mm
1432mm1435mm
1432mm
1432mm
1432mm
1432mm
1436mm
1438mm
1435mm
1435mm
1435mm
Whilst conversions have been available and undertaken in large volumes in the past, the componentsare no longer readily available, generally regarded as uneconomic and anyone attempting this process
should contact Pandrol directly for advice.
This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305.
Conversion of obsolete fastenings on very old concrete sleepers
Unipart Rail Infrastructure Catalogue
FINISHESClips are available with either STANDARD or CORROSION PROTECTION (previously called SHERARDISED) finishes.CORROSION PROTECTION (CP) finish should be used in the following areas:
� Wet Tunnels � Coastal areas � Level crossings � Adjacent to heavily salted roads and platforms
FC1504.Used on G44 and EG47concrete sleepers and Series600 steel sleepers.Nominal toe load per clip = 10kN
Standard Finish: Green0057/048048
CP Finish: Purple Gloss0057/048055
Type Cat.No. and Finishes
Clip Applications and Colour CodingCat.No. and Finishes
FC1501.Used on F41 and EF36concrete sleepers and Series500 steel sleepers.Nominal toe load per clip = 10kN
Standard Finish: Red0057/048033
CP Finish: Grey Gloss0057/048056
FC1503.Used only for Pandrol TypeSFC baseplates for slab track.Nominal toe load per clip = 10kN
Standard Finish:not allocated
CP Finish: Blue0057/002029
e plus - eP20127. Used on F27,EF28 and W402sleepers where extra resilienceand insulator durability isrequired. Fitted with integralType 9903 toe insulator.Nominal toe load per clip =12.5kN
Standard Finish: Red0057/048237
CP Finish: Grey Gloss0057/048307
e plus - eP20129.Fitted with integral Type 7387toe insulator.
For use on NR60 S&C andEG49 fitted with 60E1.Nominal toe load per clip =12.5kN
Standard Finish: Green0057/048236
CP Finish: Blue Gloss0057/048308
e plus - eP20130. Left hand version of eP20129.Nominal toe load per clip =12.5kN
Standard Finish: Yellow0057/048252
CP Finish: Purple Gloss0057/048309
Re1609.Used on F23 to F27, EF28,5EF28, W402 sleepers forre-railing operations, used inconjunction with pad type 14229.Clip is fitted with integral toeinsulator not separately available.Nominal toe load per clip = 9 kN
S. Finish: Red & White Toe-insulator0057/048469
S. Finish: Grey & White Toe-insulatornot allocated
Re1801-7.Used on F23 to F27, EF28, 5EF28and W402 sleeper types for loosesleeper relaying of serviceablesleepers. Clip provides greaterresistance to dropped sleepers duringclip insertion. Toe-insulator is integralto the clip. Design toe-load = 9 kN.
S. Finish: Red & Orange Toe-insulatornot allocated
S. Finish: Grey & Orange Toe-insulatornot allocated
Re1801-16.Used on F40 &5F40 sleepers foreither re-railing or loose sleeperrelaying of serviceable sleepers.Toe-insulator is integral to theclip.Design toe load per clip = 9 kN S. Finish: Red & Blue Toe-insulator
not allocatedS. Finish: Grey & Blue Toe-insulator
not allocated
e1809.For use in F40 sleepers with aBlue (HVN) insulator. For use inall other sleepers with anOrange (Nylon) insulator. Must not be used with GreyCast Iron ‘PAN’ Type Baseplates.Nominal toe load per clip = 9kN
AL23. Maintenance replacement for A1 spike.The AL23 spike is suppliedin two parts. The inner partis black and the outer partis red and fit together asshown.
Standard Finish: Red0057/048255
CP Finish: Natural Matt Grey0057/048031
e1810.Left handed version of e1809.
Used in IBJs in varioussituations.Nominal toe load per clip = 9kN
Standard Finish: Yellow0057/048256
CP Finish: Black Gloss0057/048043
e2001.High toe load clip for F27/EF27 sleepers. Used in difficult areaswhere insulator crushing orcreep is occurring. Must beused with a WHITE insulatoreither type 2433 or type 6924. Standard Finish: Purple
0057/048239CP Finish: Red Gloss
0057/048044e2007.High toe load clip is interchangeablewith either PR401A or e1809 cliptypes. Should NOT be used inapplications fitted with orangeinsulator type 724a. Also usedwith IBJ’s in NR60 S&C.Nominal toe load = 12.5 kN
Standard Finish: Blue0057/048248
CP Finish: Grey Gloss0057/048045
PR401A.For concrete sleepers and allPAN plates EXCEPT obsoletePAN1 to PAN5 where PR303clips were used.Nominal toe load per clip = 6.5kN
Standard Finish: Red0057/048239
CP Finish: Natural Matt Grey0057/048253
e2071.Clip only used for ZeroLongitudinal Restraint (ZLR), toconvert the following sleepertypes to ‘rail free’ assemblies:F23 to F27, EF28, 5EF28,W402, F40 & 5F40, with otherspecialist components.
Standard Finish: not available CP Finish: Green0057/048587
PR402A. Left handed version of PR401A.Nominal toe load per clip = 6.5kN
Standard Finish: Blue0057/048243
CP Finish: Grey Gloss0057/048234
PR427A.Maintenance replacement forPR303 in PAN1-PAN5 baseplates.Not suitable for other types ofbaseplate.Nominal toe load per clip =6.5kN
Standard Finish: Purple0057/048245
CP Finish: Red Gloss0057/048242
PR428A.Maintenance replacement forleft handed PR304in PAN1-PAN5 baseplates.Not suitable for other types ofbaseplate.Nominal toe load per clip =6.5kN
Standard Finish: Green0057/048244
CP Finish: Yellow Gloss0057/048249
Panlock.Clips for Bull Head Rail.
Standard Finish: Red0057/048450
CP Finish: Natural Matt Grey0057/048046
A1 spike. Original elastic rail spike.
Standard Finish: Red0057/048781
Standard Finish: Red/Black0057/048785
Type
This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305.
Note: 10kN = 1 tonne
Unipart Rail Infrastructure Catalogue
FASTCLIP Type 8582Sidepost Insulator (Blue)16.4mm sidepost thickness. For use onthe FIELD side of the 56E1 rail when fittedto G44, EG47, Series 560, 560H, 600,HH10 Mk2 and HH12 sleepers. Also usedto replace obsolete insulator type 9373previously used for hook-in shoulders withsteel sleepers. 0057/048064
FASTCLIP Type 8494Toe Insulator (White)For use on all sleeper types fitted with theFASTCLIP system.
0057/048020
e-PLUS Type 9903Toe Insulator (White)Previously coloured blue.Not supplied separately, always suppliedalready fitted to the e-PLUS clip types.
0057/048113
Orange (Nylon) Type 724a5mm sidepost thickness x 5mm bladethickness. Used for: F23 , F24 series,EF25, F27, EF28, EF29, EF32, EF33,F34, F35 concrete sleepers and 400series, steel sleepers with 56E1 orBS110A or BS110A rails.
0057/048424
Blue (Nylon) Type 724a5mm sidepost thickness 5mm blade thicknessused where 98lb and 109lb rail is installed. Usedfor concrete sleeper types: F23, F24, EF25, F27,EF28, EF29, EF33, F34, & F35, as well as steelsleepers 400 Series. NOTE: This insulator isnot commonly available, and can be replacedwith Pandrol type 6924 provided this is usedwith clip type e2001. 0057/048423
Blue (GRN) Type 44528mm sidepost thickness x 8mm bladethickness used on: F40 and 5F40 sleepers.
0057/048027
White (GRN) Type 24335mm sidepost x 8mm blade thickness(previously coloured black) used with e2001clip. Also used on F40 & 5F40 sleepers aspart of the range of gauge managementinsulators to adjust the track gauge, by movingthe rail across the rail seat. This insulator canbe upgraded to use HVN by substitutinginsulator type 6924, which is an identical size. 0057/048436
White Type 6924White (HVN) type 6924, 5mm side post x8mm blade thickness used with e2001 clip.Also can be used with NR56V S&C to replacecomposite insulators. This HVN insulator issufficiently flexible to be used as a replacementfor Blue nylon insulator Catalogue No.57/48423 with either 98lb or 109lb rail, butcan ONLY be used with e2001 clips. Not allocated
Brown (HVN) Type 758312mm sidepost x 8mm blade thickness. Usedas part of the range of Pandrol insulators toprovide gauge management by adjusting theposition of the rail in the rail seat. A separatedata-sheet is available to advise the methodsand adjustment range achievable. Gaugemanagement can be provided for concretesleeper types: F40, & 5F40. 0057/048434
Red (HVN) Type 10274Insulator for 56E1rail on FIELD side of:1. NRS1/NRS2/Combi baseplates.2. EG49 concrete sleepers.
0057/048082
FASTCLIP Type 7551Sidepost Insulator (White)8mm sidepost thickness. Used on G44,EG47, Series 560, 560H, 600, HH10 Mk2and HH12 sleepers with 60E1 rail. Usedon F41, 5F41, 5EF36 and Series 500 steelsleepers with 56E1 rail. Also used to replaceobsolete insulator type 8914 previously usedfor hook-in shoulders with steel sleepers. 0057/048021
FASTCLIP Type 8690Sidepost Insulator (Black)10mm sidepost thickness. For use on theGAUGE side of the 56E1 rail when fittedto G44, EG47, Series 560, 560H, 600,HH10 Mk2 and HH12 sleepers. Also usedto replace obsolete insulator type 9374previously used for hook-in shoulders withsteel sleepers. 0057/048066
FASTCLIP Type 8691Sidepost Insulator (Green)6mm sidepost thickness. Used in limitedareas where oversize 60E1 rail wassupplied. Used in place of the GAUGEside Type 7551 sidepost Insulator.
0057/048067
FASTCLIP Type 8277Side post insulator (Yellow)13mm sidepost thickness, for use onHH10 Mark 1 sleepers with Type 9922hook in shoulders.
0057/048118
e-PLUS Type 9132Sidepost Insulator (Blue)Used with eP20127 clip on F27, EF28,W402 sleepers and NR56V S&C.
0057/048111
e-PLUS Type 9875Sidepost Insulator (White)Used with eP20129 clips on F40 sleepersand NR60 S&C.
0057/048294
e-PLUS Type 9877Gauge Management Insulator (Black)10mm sidepost insulator, used for NR60S&C.
0057/048114
e-PLUS Type 9876Gauge Management Insulator (Green)6mm sidepost insulator, used for NR60S&C.
Insulator Applications and Colour CodingType Catalogue Number Type Catalogue Number
0057/048115
This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305.
Unipart Rail Infrastructure Catalogue
Yellow (HVN) Type 10275Insulator for 56E1on GAUGE side of:1. NRS1/NRS2/Combi baseplates.2. EG49 concrete sleepers.
0057/048081
Pad No. 6650Thickness: 10mmMaterial: Studded RubberUsed on FASTCLIP concrete sleepers with56E1 rail.
0057/048271
Pad No. 8854Thickness: 10mmMaterial: Studded RubberUsed on FASTCLIP concrete sleepers with60E1 rail.
0057/048254
Pad No. 9286Thickness: 8mmMaterial: Studded RubberUsed on F27 and EF28 sleepers when fit-ting the e-Plus system.
0057/048441
Pad No. 9328Thickness: 10mmMaterial: Studded RubberUsed on e-Plus RT60 and NR60 layouts.
0057/048293
Pad No. 5197Thickness: 10mmMaterial: Studded RubberUsed on EG49 sleepers with either 56E1or 60E1 rails.
0057/048088
Pad No. 7031Thickness: 10mmMaterial: Studded RubberUsed on NRS1, NRS2,andCombi baseplates.
0057/048613
Green (HVN) Type 5720Insulator for use with 60E1 rail using:1. NRS1/NRS2/Combi baseplates with
60E1 rail.2. 6 Hole IBJ’s on NR60 S&C, EG49
Concrete sleepers.
0057/048060
Composite(Nylon with cast iron cover plate) for:1. Concrete S&C bearers.2. As a substitute for ORANGE (Nylon)
insulators where the wear rate isunacceptable. NOTE: This insulator is not commonly available, and can be replaced with Pandrol type 6924 provided this is used with clip type e2001. 0057/048427
Composite (Black) Type 2786/16mm sidepost thicknesses.
0057/048166
Composite (Blue) Type 2786/27.5mm sidepost thicknesses.
0057/048167
Composite (Red) Type 2786/39mm sidepost thicknesses.
0057/048168
Composite Cover PlatesComposite cover plates Type 2787, toprovide 4, 8 and 12mm blade thicknesses.
Composite InsulatorsFor level and gauge adjustment on slabtrack installations.Plastic insulators and metal cover platesare combined to give a variety of bladeand sidepost thicknesses.
Pad No. 14229Studded EVA rail pad 8mm thick bondedto HVN side insulators of 5.5mm thick.Used with ‘Re1609’ or ‘Re1801-7’ clips onolder sleeper types, F23 to F27, EF28,5EF28, W402, HH10 (Mk1).
Catalogue Number depends uponinsulator sand cover plates selected
Insulator and Rail Pad Applications with Colour CodingType Catalogue Number Type Catalogue Number
Pad No. 15946Used as part of the 'Re' system on F40 or 5F40sleepers for re-railing or loose sleeper relaying.10 mm studded and curved rubber pad whichis permanently bonded to side insulators. Theinsulators allow the pads to be stacked and'nested' for easy packing and handling. not allocated
Pad No. 2061/3Thickness: 5mmMaterial: Flat EVA Used with W402sleepers and PANbaseplates.Can also be used with concrete sleepertypes: F23, F24 ,EF25, F27, EF28, EF32,EF33, F34, F35. 0057/048521
Pad No. 9970Thickness: 10mmMaterial: Studded EVAUsed on FASTCLIP steel sleeperswith 60E1 rail.Supersedes / interchangeable with 7850.
0057/048077
Pad No. 8531Thickness: 10mmMaterial: Studded EVAUsed on FASTCLIP steel sleepers 56E1rail.
0057/048278
Pad No. 4548Thickness: 10mmMaterial: Studded RubberUsed on F40 and 5F40 sleepers.
0057/048028
0057/048470
This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305.
Unipart Rail Infrastructure Catalogue
PANDROL Handtools
PANDROL handtools are designed by PANDROL to be safely and efficiently used on PANDROL fastening assemblies. Components are accurately cut and hardened to maximise operator safety and tool life.
PANSETTER for PR, e-PLUS & Re clipsPANDROL No. 2-P9559THE PANSETTER is suitable for allNetwork Rail Sleepers fitted with PR, e &e-PLUS.Catalogue No. 0039/042900
Optional Handles Catalogue Nos. for tools with straight insulated handles.All Pandrol hand-tools can be supplied with optional insulated handles, which haverecently been upgraded to 35mm diameter cylindrical handles with ‘T’ cross bars forimproved ergonomic and safer use.
The photograph shows a typical handle attached to a FASTCLIP sleeper lifter.PANPULLER type ‘C’:Cat No. 0039/040129PANSETTER: Cat No. 0039/040133PANLOCK Puller: Cat No. 0039/040135FASTCLIP installer: Cat No. - Not allocatedFASTCLIP extractor: Cat No. - Not allocatedFASTCLIP lifter: Cat No. - Not allocated
Other options: Cranked head installers for usein areas of restricted access such as beside tunnel walls and platform edges.The most common cranked head tool is the FASTCLIP 'FC' 'FE' SFC & VIPA installer.
FASTCLIP Hydraulic ToolRAILTECH TYPE CDH 16Catalogue No. - Not allocated
PANPULLER Type D For PR, & e ClipsPANDROL No. LP7632Especially for e2001 and e2007clips butNOT for 4-shoulder baseplates.NOTE: hook positions for max efficiency:Upper pivot: Clip installationLower pivot: Clip extractionCatalogue No. - Not allocated
Elastic Spike ExtractorElastic Spike extractor available fromTool and Steel;Product code: TASTE112Catalogue No. 0039/017090
PANPULLER Type C for PR, & e ClipsPANDROL No. LP1180And for 4 shoulder baseplates.Catalogue No. 0039/042748
e-PLUS PANPULLER LP12717PANDROL No. LP12717Colour: Red working head (matches theappropriate e-PLUS clip type), and yellowhandle. For use with eP20127 clips forretrofitting to sleeper types: F27, EF28,5EF28, and for the new S&C designs toNR56V. Catalogue No. - Not allocated
e-PLUS PANPULLER LP15923PANDROL No. LP15923Colour: WhiteThe tool is used with the eP20129 greenor eP20130 yellow e-PLUS clips, mostlywith RT60 and NR60 S&C layouts.Catalogue No. 0039/042749
Replacement Hook for TypesC and D PANPULLERPANDROL No. 3-P2260Catalogue No. 0039/042743
This data is extracted from the Pandrol User Edition 8. Copies x 20 can be obtained by using cat number 0050/001305.