Computer Training Institutes STAAD Pro Nagpur,CADDCAMGurur

About Us • CADD CAM GURU is the Computer Training

Institutes For STAAD Pro.STAAD stands for Structural Analysis And Design.

• STAAD Pro is a structural analysis and design computer program used for steel, concrete, timber, aluminum, and cold-formed steel design of virtually any structure including culverts, petrochemical plants, tunnels, bridges, piles, etc.

• It is used for 3D model generation, analysis and multi-material design.

Staad Pro

• STAAD Software

• Method of Analysis

• Starting STAAD Pro

• Creating New File

• STAAD Pro Screen

• Opening and closing a Existing STAAD Pro file.

• Saving & Saving As

Staad Pro Training Include

• Model Generation

• Model Verification

• Static Analysis

• Dynamic/Seismic Analysis

• Secondary Analysis

Model Generation

Interactive menu-driven model generation with simultaneous 3D display 2Dand 3D graphic generation using rectangular or polar coordinate systems Segments of repetitive geometry used to generate complex structural models

Model Verification

2D/3D drawings on screen as well as on plotter/printer Full 3D shapes for frames, elements Isometric or any rotations for full 3D viewing

Static Analysis

2D/3D analysis based on state-of-the-art Matrix method to handle extremely large job. Linear, p-delta analysis, non-linear analysis with automatic load and stiffness correction.

Dynamic/Seismic Analysis

Mass modeling, extraction of frequency and mode shapes Response spectrum, time history analysis Modal damping ratio for individual models.

Secondary Analysis

Forces and displacements at sections between nodes. Maximum and minimum force envelopes.

CADD CAM GURUCADD CAM GURU

1st floor, plot no. 818/A, Nehru Nagar, Cement Road, Nandanvan Colony, Above SBI bank, Nagpur-440009Ph: +91-7385584531 , +91-9021271884 Email :[email protected], [email protected]

http://caddcamguru.com