This document is uncontrolled when printed. © 2014 Evol ution Oil Tools Inc. All rights re served. www.eotools.com Toll Free: 1-800-265-TOOL Composite_Bridge_Plug_TDS_Rev-C September 2014 Completion Tools Composite Bridge Plug Cost effective solution for temporary zone isolation Applications Temporary zone isolation Temporary plug Features & Benefits Cost effective & dependable Proven Nitrile elastomer element system One piece, full circle slips Quick and easy drill-up Inter-locking taper on both top and bottom Tested at 350° F and 15,000 PSI for 4 1/2 to 5 ½ inch models and 12,000 PSI for 7 inch version Description The Evolution Oil Tools Composite ridge Plug provides a cost-effective alternative to temporarily isolate multiple zones for fracturing, or other treatments. The composite material allows for quicker drill times and less formation damage. Interlocking tapers on the top and bottom prevent plug remnants from rotating while removing multiple plugs. Specifications Item Number Casing Tool Pressure Rating (PSI) OD ID MAX. ID MIN. WEIGHT OD Inches mm Inches mm Inches mm Lb./Ft Kg/m Inches mm 43CCBP 4 1/2 114.3 4.09 103.88 3.82 97.18 9.5 – 15.1 14.1 – 22.5 3.61 91.7 15,000 44CCBP 5 127 4.56 115.8 4.27 108.5 11.5 – 18 17.1 – 26.8 3.93 99.8 45CCBP 5 ½ 139.7 5.04 128.12 4.55 115.44 13 – 23 19.3 – 34.2 4.31 109.5 45CCBPB 5 ½ 139.7 5.04 128.12 4.65 18.19 13 – 20 19.3 – 29.8 4.50 114.3 47CCBP 7 177.8 6.53 166.06 6.00 152.40 17 – 35 25.3 – 52.1 5.69 144.5 12,000