Complex CNC Machining Grinding & Coatings · 2019-10-24 · Page 1 of 1. This is to certify that the Management System of: Altec Engineering Limited. Bowburn, Unit 1, Bowburn North

ENG I N E E R I NG LTD

CNC Division

Complex CNC MachiningGrinding & Coatings

Altec Engineering LimitedCNC Precision Machining Capability

• Medium to High Complexity Machining• Low, Medium and High Volume Capability• Full Contract Supply, Inclusive Of Special

Processes• New Product Introduction• Exotic Materials• CustomerSpecificDocumentationPacks• Supply Chain Management

Services

03

• 5 Axis CNC Machining• 3 & 4 Axis CNC Machining• 3 Axis Turning• 7 Axis Sliding Head• Universal Grinding• Wire Erosion• Electro Discharge Machining• 3D Printing• Coatings

In-house Capabilities

Aerospace Approvals

Nuclear Approvals

Certificate of Approval

Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom

Page 1 of 1

This is to certify that the Management System of:

Altec Engineering Limited

Bowburn, Unit 1, Bowburn North Industrial Estate, Durham, DH6 5PF, United Kingdom

has been approved by LRQA to the following standards:

ISO 9001:2015

David Derrick - Area Operations Manager UK & Ireland

Issued by: Lloyd's Register Quality Assurance Limited

Current issue date: 2 July 2018 Original approval(s):

Expiry date: 1 July 2021 ISO 9001 – 5 February 2007

Certificate identity number: 10100285

Approval number(s): ISO 9001 – 0006035

The scope of this approval is applicable to:

Mechanical, Electrical and PLC Program Design of special purpose equipment incorporating pneumatic, automated fluid dispensing, electrical control and safety control systems, touch screen operator panels, data

capture handling, robotic assembly, robotic welding cells and jigs, conveyor handling systems, press systems, screw driving systems, ammunition handling equipment and final functional testing systems. Design,

manufacture and repair of fabrications, press tools, production assembly and inspection jigs and fixtures. Precision manufacturing including tool making, CNC precision machining of standard, exotic and hard materials and armour, spark and wire eroding, surface and cylindrical grinding, welding and rapid prototyping. Defence

through life support manufacturing.

Certificate of Approval

Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Quality Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom

Page 1 of 1

This is to certify that the Management System of:

Altec Engineering Limited

Bowburn, Unit 1, Bowburn North Industrial Estate, Durham, DH6 5PF, United Kingdom

has been approved by LRQA to the following standards:

AS 9100D (technically equivalent to prEN 9100:2016 and JISQ 9100 – 2016)

This certification has been performed in accordance with the requirements of EN 9104-001:2013

Lloyd's Register Quality Assurance is accredited under the IAQG ICOP scheme

Certification Structure – Single Site

David Derrick - Area Operations Manager UK & Ireland

Issued by: Lloyd's Register Quality Assurance Limited

Issue date: 2 July 2018

Expiry date: 1 July 2021

Certificate identity number: 10100284

Original approval(s):

AS 9100 5 February 2007

Approval number(s): AS 9100 - 0006036

The scope of this approval is applicable to:

Manufacture of precision components for aerospace, defence, oil, gas and nuclear industries. The pre-treatment and surface coating of ferrous and non-ferrous metals to customer requirements.

5 Axis Milling Up To 3M & Twin Pallet Machines

3 & 4 Axis Milling

3 Axis Turning & 7 Axis Sliding Head

Special Processes: Universal Grinding - Wire Erosion - EDM

3D Printing Coatings

CNC

CATIA V5 HyperMill

CAD / CAM & 3D Printing

www.alteceng.co.uk

CAD Sesign to3D Printed

Sample

3D PrintedSample to

Part Machining

MachinedPart To

Finished Product

CNC

www.alteceng.co.uk

5 Axis Milling - Vertical Travelling Column

5 Axis Milling - Variaxis Trunion Twin Pallet

• Multi-Axis Capability To 3M Long• High Accuracy Machines• Full Connectivity To Our Production

Engineering Department• Proven Capability

CustomerBenefits• High Pressure Coolant• Ability To Perform Gun Drilling Operations• RMP60 In Process Measuring• Extended Tool Magazines For Long

Running Or Multiple Setups

Special Features

3 & 4 Axis Milling

CNC

www.alteceng.co.uk

3 Axis CNC Turning

3 Axis CNC Turning With Indexing Chucks

7 Axis Sliding Head

• Small To High Volume Manufacturing• 3 Axis Capacity Up To 580 Diameter x 2.2M long• Robot Gantry Fed Lathe Systems• 7 Axis Capacity Up To 35mm Diameter

CustomerBenefits• Pallet & Gantry Robot Systems• Collet Chuck Systems• Indexing Chuck Systems

Special Features

CNC

External Wheel No. 2

Internal

External Wheel No. 1

www.alteceng.co.uk

SPECIAL PROCESSES: CNC Universal Grinding

• Internal & External Grinding• ProfileGrinding• Diameters Up To 350mm x 1M Long• CAM, Punch & Eccentric Diameters• High Pressure Centrifuge Swarf System• Range Of Work Holding Exacting Tolerance Capability• Internal - External Spherical Forms• CAD / CAM• +/-0.002

CustomerBenefits• Thread Grinding

Special Features

CNC

SPECIAL PROCESSES: Wire Erosion

www.alteceng.co.uk

• Complex Geometries• 0.005mm Accuracy• Capability Up To 400mm x 300mm x 250mm

CustomerBenefits

SPECIAL PROCESSES: Wire Erosion

SPECIAL PROCESSES: Electro Discharge Machining

CNC

• Temperature & Humidity Controlled Inspection Facility• Extensive Suite Of Calibrated Measuring Equipment

CustomerBenefits

Qty Age Description Accuracy Capacity1 2005 QTC Quantum 0.005 100 x 600 x 350

1 2014 Aberlink A100M CNC CMM 0.005 1500 x 640 x 500

1 1994 DEA Swift Manual CMM 0.005 350 x 150 x 200

1 2011 Trimos V3 0.001 300

1 2014 Trimos V5 (extended probe option) 0.001 700

1 2014 Baty Digital Shadow Graph 0.002 Diameter 700

1 1999 Talyrond 100 Roundness Tester X 5000 Mag Diameter 190

1 2014 GageMaker Mic Trac 0.002 0-900 (36”)

www.alteceng.co.uk

Inspection & Quality Assurance

CNC

• Vibratory Trough De-Burring• Bead Blasting

In-House ServicesSurface Preparation

• Alocrom 1200 - DEF STAN 03-18• SurTec 650 - MIL-DTL-81706 - MIL-DTL-5541 - Type II Class 3

Dip Tank Technology

We work with a large number of customerspecificNADCAPapproved:

• Painters• Plasma & HVOF Coaters• Electro Plating• Gun Drillers• Honers• Heat Treatment• Non Destructive Testing (NDT)

Supply Chain Management

www.alteceng.co.uk

Surface Preparation & Specilist Coatings

CNC

Meet The Sales Team

Contact UsAltec Engineering LimitedUnit 1Bowburn North Industrial EstateBowburnDurhamDH6 5PF

Tel: +44(0)191 377 0555Fax: +44(0)191 377 3013

Email: [email protected]: www.alteceng.co.uk

Altec CNC is a trading division of Altec Engineering Limited

Registered Address (As Above)

Registered in England & Wales with Registration Number 07480789

Paul LackenbyManaging DirectorContact:Mobile: 07984 608 016Email: [email protected]

Paul MoodyBusiness Development ManagerContact:Mobile: 07720 088 332Email: [email protected]

Chris BellTechnical Sales ManagerContact:Mobile: 07801 580 621Email: [email protected]

Mark BruceGrinding SpecialistContact:Mobile: 07947 353 518Email: [email protected]

Phil RobsonOperations ManagerContact:Mobile: 07834 653 671Email: [email protected]

www.alteceng.co.uk

Sarah Lackenby - Mechanical Engineer Graduate ProgrammeContact:Mobile: 07717 875 975Email: [email protected]