This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Complete Line of Tools forInstallation and Repair of
Emco Spill Containers and Adapters
A0081Tools
1 A0081-001TB Tool Box 2 A0081-009B Chain Wrench Adapter Bit 3 A0081-001B Swivel Adapter Bit 4 A0081-003B Pipe Nipple Extractor Bit 5 A0081-001LB Lug Adapter Bit 6 A0081-001HB Spill Container (w/Drain) Bit
Driver Assembly - Individual components can be purchased separately. See table at right.
A0081-001LBLug Adapter Bit
A0081-001BSwivel Adapter Bit
Hex bolt to facilitate use with a torque wrench
Place over hexon adapter. Turn to install or remove. Recommended torque: 60-75 ft. lbs.
A0081-001AExtension
Place over adapter lugs. Turn to install or remove.
(2 included - attached to drive shaft)
Use to install and remove fill adapters with lugs.
Use to adjust the center insert of the 494096 Riser Seal. Replaces the 494120 Riser Seal Wrench.
Fits OPW 3” and 4” adapters.
Emco Wheaton A0081 Wrenches are specially designedfor the installation and repair of Emco spill containers and adapters. Wrenches can be purchased as complete units, individual components, or as a complete set.
The wrenches are blue powder coated, steel construction.
Model No. Application Lbs.
Tool Box SetA0081-001SET Standard Tool Kit 92.3A0081-001SET-NB Standard Tool Kit w/o Tool Box 38.8
494240 Adapter Torque WrenchThe 494240 is used to verify the static torque of the swivel adapter in accor-dance to CARB Test Procedure TP.201.1B
566675 Drill FixtureThe 566675 Drill Fixture is used to accurately drill the rivet holes on the top drop tube for the Emco Wheaton A1100EVR collar assembly.
A0081-004CL Cam-Lock WrenchThe A0081-004CL Cam-Lock Wrench is used to install and remove the A0716 Composite Manhole cam-lock lids.
A0081-1100 A1100 Testing ToolThe A0081-1100 Testing Tool is used to quickly and easily test the A1100-T series Testable Overfill Prevention Valve, without removing the valve from the riser.
493820 Drain WrenchThe 493420 Drain Wrench is used for installation and removal of the Emco Wheaton A1004EVR Spill Containment drain valves.
569143Test Cap
A1004-210TESTTest Apparatus
A1004-210TEST Vacuum Apparatus w/Test AdapterThe A1004-210TEST is designed to perform vacuum testing on interstitial space in double wall spill containment. 5 lbs.
Model No. Description
A1004-210TEST Vacuum Test Apparatus 494343 Test Adapter 569143 Test Cap Assembly 569194 Air Switch 1/8” 569195 Air Regulator 1/8”
A0099-001TEST Vapor Test CapThe A0099-001TEST Vapor Test Cap is used when performing a pressure decay test. The cap incorporates the same features as the A0099-002 Vapor Cap. The extended tube underneath the cap opens the poppet on the vapor adapter. Pressure is inject-ed through the Schrader valve, and a gauge can be connected to the barbed fitting.
494343Test Adapter
A0081 Test CoverThe A0081 Test Cover is used with the Emco A1004-210TEST to perform vacuum testing on spill containment.
Part No. Spill Containment Diameter Lbs.
A0081-12TEST A1005-505 Series 12.40” 4.5 A0081-13TEST A1004-316/517 Series 13.13” 4.5 A0081-15TEST A1004-210 Series 15.25” 4.7 A0081-17TEST A1004-215 Series, A1005-505CP 17.38” 5.0