completat - astr.ro activitate 2014 ASTR_completat.pdf · dezvoltare tehnologica si transfer tehnologic a rezultatelor ... Procedeu si generator pentru obtinerea hidrogenului din

1

Academia de Stiinte Tehnice

Sectia IX- Stiinta si Ingineria Materialelor

RAPORT ACTIVITATE PENTRU ANUL 2014

- completat -

In anul 2014 membrii Sectiei de Stiinta si Ingineria Materialelor au desfasurat atat activitati de

dezvoltare tehnologica si transfer tehnologic a rezultatelor cercetarilor proprii in industrie cu aplicatii

directe in productia de echipamente, cat si activitati de cercetare stiintifica si promovare a rezultatelor

cercetarilor la manifestari stiintifice si in reviste de specialitate.

A) Transfer tehnologic. Aplicatii industriale.

Fig.1 Instalatie procesare piese pentru masini unelte (Export Elvetia; Coordonator prof. Druga)

2

Fig. 2 Instalatie durificare matrite mari (Export Germania; Coordonator prof. Druga)

Fig.3 Instalatie pentru procesare pistoane auto (Export Germania; Coordonator prof. Druga)

Fig.4 Instalatie procesare piese auto (Coordonator prof. Druga)

3

Fig.5 Modul pentru procesare componente navale

(Export Finlanda; Coordonator prof. Druga)

4

Fig. 6 Implementarea criteriului BBC2005 in programele de simulare pentru procesele de deformare

ale tablelor, utilizate de catre firma Volvo (Coordonator prof. Banabic)

Fig.7 Implementarea modelelor Banabic 2005 si Banabic 2008 in platforma UMMD dezvoltata de

Asociatia Japoneza pentru ingineria asistata de calculator (Coordonator prof. Banabic)

B) Contributii la realizarea unor tratate de specialitate si/sau a unor capitole in tratate de

specialitate (8). Brevete

1. Banabic D., Sheet Metal Forming Processes, Science Press, Beijing, 2014 (translation in Chinese

of the book published in 2010 by Springer)

2. Felice L., Banabic D., Formability and damage, In: (Eds.: L. Laperrière, G. Reinhart, Encyclopedia

of Production Engineering), Springer, Heidelberg-Berlin, 2014, p.539-547

3. Brosius A., Banabic D., Anisotropy, In: (Eds.: L. Laperrière, G. Reinhart, Encyclopedia of

Production Engineering), Springer, Heidelberg-Berlin, 2014, p. 40-47.

4. Banabic D, Fliessortkriteria, In: (Ed.: Siegert K., Blechumformtechnik, Springer, Heidelberg-

Berlin, 2014.

5. Cojocaru M., Druga L., The Estimation of the Quenching Effects After Carburising Using an

Empirical Way Based on Jominy Test Results”, in Book: Recent Researches in Metallurgical

Engineering - From Extraction to Forming, ISBN: 978- 953-51-0356-1, INTECH – Croatia

5

6. Anisoara Oubraham, Mihaela Cristina Barbu, Ioan Stefanescu, Studii privind continutul de metale

grele si continutulizotopic de deuteriu in apa raului Olt, ISBN 978-606-11-3843-2, Editura Sitech,

Craiova, 2014.

7. M. Abrudeanu, G.A. Plaiasu, M.M. Dicu, Materiale, Editura Paralela 45, ISBN 978-973-47-1827-

6, 371 pagini, 2014.

8. W. Kappel, Magneti permanenti pentru sisteme microelectromecanice din programul de master:

Nano si microsisteme electromagnetice, Curs si laborator, Fac. de Inginerie Electrica a UPB.

Brevete

1. Side impact passive protection system for automobiles has structure for taking over the effect of

side impact and it consists of some horizontal platbands , Patent Number: RO129771-A2 , Patent

Assignee: Univ. PITESTI, Sutan C; Didea I; Abrudeanu M; et al.

2. Radio controlled multi function platform for collecting environment samples,Patent Number:

RO129766-A2,Patent Assignee: Univ. PITESTI, Inventor(s): ): Sutan C; Didea I; Abrudeanu M

3. Procedeu si generator pentru obtinerea hidrogenului din deseuri metalice si apa, CBI nr.

A/00745/06.10.2014, David E., Stefanescu Ioan

4. Procedura de realizare de membrane polimere compozite pe baza de oxizi pentru sisteme

electrochimice de producere a energiei electrice, CBI nr. A/00849/12.11.2014, Ion Ebrasu D., I.

Petreanu, L. Patularu, M. Varlam, D. Schitea, Enache S., V. Stanciu, Ioan Stefanescu

5. Procedeu de ranforsare mecanica a membranelor polimere de tip PEM, utilizate in generatoare

electrochimice, CBI nr. A/00960/08.12.2014, Patularu L.,Enache S., Schitea D., Ion Ebrasu D.,

Varlam M., Stefanescu Ioan

6. Structura inductor-indus fara miez magnetic pentru masini electrice cu magneti permanenti, Brevet

nr. 123604, Kappel Wilhelm, Mihaiescu Gheorghe Mihai, Ilie Cristinel Ioan,Gavrila Horia

Catalin,Vasile Iulian

C) Lucrari publicate in reviste de specialitate interne si internationale (28)

1. G. Tomoaia, A. Mocanu, I. Vida-Simiti, N. Jumate, L.D. Bobos, O. Soritau, M. Tomoaia-Cotisel,

Silicon effect on the composition and structure of nanocalcium phosphates in vitro biocompatibility

to human osteoblasts, Materials Science Engineering C, 37 (2014),pp. 37-47 (cotata ISI).

2. E.Culea, I. Vida-Simiti, G. Borodi, E. N. Culea, R. Stefan, & P. Pascuta, Structural and

spectroscopic effects of Ag–Eu3+ codoping of TeO2–PbO glass ceramics, Journal of Materials

Science, (07/2014), 49(13), pp. 4620-4628. (cotata ISI).

6

3.E. Culea, I. Vida-Simiti, G. Borodi, E. Nicolae Culea, R. Stefan, & P. Pascuta, Effects of Eu3+ Ag

codoping on structural and spectroscopic properties of lead tellurite glass ceramics, Ceramics

International, (2014), 40(7 Part B)pp. 11001-11007. (cotata ISI).

4. G. Strnad, L. Jakab-Farkas, S. Papp, A.Z. Fekete, D. Biro, I. Vida-Simiti, Optimization of Reactive

Sputtering Technology for Hard Coatings Deposition, Applied Mechanics and Materials, Vol. 654

(2014), pp. 246-250.

5. G. Gherasim, Gy. Thalmaier, N. Sechel, S. Suta, P. Pascuta, I. Vida-Simiti, Amorpysation of

Al80Fe10Ti10 Powder by Wet Mechanical Milling, EuroPM 2014-PM Functional Materials

6. G. Gherasim, Gy. Thalmaier, N. Sechel, F. Cziple, V. Petrescu, I. Vida-Simiti, Open Cell Al-Si

foams by a sintering and dissolution process, Solid State Phenomena, Vol. 216 (2014), pp. 249-254).

7. S. Suta, G. Gherasim, G. Thalmaier, N. Sechel, I. Vida-Simiti, Obtaining of Al3Ti Porous

Materials by Reactive Sintering, Metallurgy and Materials Researches, Vol. XXII, no.2, 2014, pp.27-

32.

8. G. Gherasim, S. Suta, G. Thalmaier, N. Sechel, I. Vida-Simiti, Thermal Conductivity of some

AlSi12 Foams, Metallurgy and Materials Researches, Vol. XXII, no.2, (2014), pp.41-49.

9. Giacomelli et al, Influenta tratamentului termic asupra biocompatibilitatii aliajelor de titan,

Cercetari Metalurgice si de noi materiale, vol. XXII nr.1 (2014), ISSN 1221-5503, pp. 29-36.

10.M. Vrh, M. Halilovič, B. Starman, B. Štok, D.S. Comsa, D. Banabic, Capability of the BBC2008

yield criterion in predicting the earing profile in cup deep drawing simulations, European Journal of

Mechanics A/Solids, 45(2014), pp.59-74.

11.Nedoushan R.J., Farzin M., Banabic D., Simulation of Hot Forming Processes Using Cost

Effective Micro-Structural Constitutive Models, Int. J. Mech. Sciences, 85 (2014) 196–204.

12.A. Kami, B. MollaeiDariani, A. SadoughVanini, D.S. Comsa, D. Banabic, Application of a GTN

Damage Model to Predict the Fracture of Metallic Sheets Subjected to Deep-Drawing, Proceedings

of the Romanian Academy, Series A, 15 (2014), pp.300-309.

13.S. Bruschi , T. Altan, D. Banabic, et al., Testing and Modeling of Material Behavior and

Formability in Sheet Metal Forming Processes, Annales of CIRP, 63 (2014), pp.727-749

14.F. Popa, I. Chicinas, D. Frunza, I. Nicodim, D. Banabic, Influence of high deformation on the

microstructure of low-carbon steel, International Journal of Minerals, Metallurgy, and Materials, 21

(2014), Issue 3, pp.273-278.

15. Buzatu M., Moldovan P., Vonica D., Semenescu A., Iacob., G.: “Mathematical modelling of the

filtration process of aluminum melts”, UPB Scientific Bulletin, Series B: Chemistry and Materials

Science, Vol. 76, Issue 2 (2014), pp. 213-224 (SCOPUS)

7

16. Moldovan P., Stanica C., Ciobanu G., Ungureanu I., Iorga G., Butu M.: “Intergranular corrosion

of AA 5083 –H321, aluminium alloys”, UPB Scientific Bulletin, Series B: Chemistry and Materials

Science, Vol. 76, Issue 3, (2014), pp.169-180 (SCOPUS).

17. Marcu D., Moldovan P., Butu M., Berbecaru A., Cosac A.: “In situ AA 7XXX TiB2 composites

produced in flux assisted synthesis”, UPB Scientific Bulletin, Series B: Chemistry and Materials

Science, Vol. 76, Issue 4 (2014), pp.183-192 (SCOPUS)

18. Druga L, Cojocaru M., Dragomir D, Deep case carburizing process, Metal Russia, (Sept. 2014),

pp. 32-34

19. Dragomir D, Cojocaru M. O, Druga L.N, The mathematical modelling of 21NiCrMo2 low

alloy steel carburizing in less common carburizing media (expanded form), in International

Journal of Microstructure and Materials Properties (IJMMP), vol.9, no.1 (2014), pp.60-70

20. Raluca Popescu, Diana Costinel, Oana Dinca, Adrian Marinescu, Ioan Stefanescu, Roxana Elena

Ionete, Discrimination of vegetable oils using NMR spectroscopy and chemometrics, Food Control,

DOI: 10.1016/j.foodcont.2014.04.046, Available online 10 May 2014, Food Control, 2015, vol. 48,

pp. 84-90, ISSN: 0956-7135, factor de impact 2013/2014: 2.819

21.Ebrasu, D., Petreanu, I., Varlam, M., Schitea D., Ioan Stefanescu, Vaseashta, A., On the synthesis

and characterization of silica-doped/sulfonatedpoly-(2,6-dimethyl-1,4-phenylene oxide) composite

membranes for fuel cells, 2014, Journal of Fuel Cell Science and Technology, 11 (4), 041005, 2014,

doi:10.1115/1.4026931

22.Gh. Ionita, Gh. Titescu, C. Ciortea, I. Stefanescu, I. Spiridon, C. Bucur, A critical analyse of

contact element used for isotopic exchange between hydrogen and water, Fusion Science and

Technology, in curs publicare, ISSN: 1536-1055

23.Anisia Bornea, Marius Zamfirache, Liviu Stefan, Ioan Stefanescu, Anisoara Preda, Experimental

investigation on hydrogen cryogenic distillation equipped with package made by ICIT, Fusion

Science and Technology, in curs de publicare, ISSN: 1536-1055

24.Marius Zamfirache, Liviu Stefan, Anisia Bornea, Ioan Stefanescu, Acquired experience resulting

from transforming a chemical installation to a nuclear, Fusion Science and Technology, in curs de

publicare, ISSN: 1536-1055

25. E.Carcadea, M. Varlam, Ioan Stefanescu, L. Patularu, A. Marinoiu, V. Tanislav, S.Enache,

Effects of Flow Field on Pem Fuel Cell Performance, Progress of Cryogenics and Isotopes Separation,

ISSN 1582-2575, 17 (2), 74-81, 2014Abstracting and indexing in: ContemporaryScience

Association, EBSCO, Ulrich's Periodicals Directory, INIS

26. E. Carcadea, M.Varlam, A.Marinoiu, Ioan Stefanescu, M.Raceanu, L.Patularu, D.Ebrasu,

V.Tanislav,C.Capris, The Influence of Catalyst Properties on CO Oxidation Reaction - A Theoretical

Aproach, ,Progress of Cryogenics and IsotopesSeparation, ISSN:1582-2575, Volume 17, issue 1/2014,

8

pp. 24-31, Abstracting and indexing in: Contemporary Science Association, EBSCO, Ulrich's

Periodicals Directory, National Institute of Scientific Information (INIS)

27. Plaiasu, A. –G, Abrudeanu, M., Dicu, M. M. et al, Elaboration and nanostructural study of pure

and Al doped ZnO nanopowders, JOURNAL OF OPTOELECTRONICS AND ADVANCED

MATERIALS Volume: 16 Issue: 9-10 Pages: 1116-1120 Published: SEP-OCT 2014

28. Bubulinca, C, Balandraud, X., Grediac, M. et al, Characterization of the mechanical dissipation in

shape-memory alloys during stress-induced phase transformation, JOURNAL OF MATERIALS

SCIENCE Volume: 49 Issue: 2 Pages: 701-709 Published: JAN 2014

D) Lucrari prezentate la manifestari stiintifice interne si internationale (52)

1. J. Gawad, D. Banabic, D.S. Comsa, M. Gologanu, A. Van Bael, P. Eyckens, P. Van Houtte, D.

Roose, Evolving texture-informed anisotropic yield criterion for sheet forming, The 9th International

Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes

NUMISHEET 2014, January 2014, Melborne, Australia.

2. D. Banabic, Continuum scale modelling in sheet metal forming, Innovative Manufacturing

Engineering International Conference, May 29-30, 2014, Chisinau, Moldova (Invited Lecture)

3. D. Banabic, From micro to macro scale modelling in sheet metal forming, Colloquium of

Metallurgy and Metallurgical Engineering, July 6-10, 2014, Tale, Slovakia, (Invited Lecture).

4. D. Banabic, Plastic Anisotropy and Forming Limits in Sheet Metal Forming, State of the art in

material modelling for sheet metal forming Symposium, Ijmuiden, The Netherlands, Sept. 30th, 2014

(Invited Lecture).

5. D. Banabic, Advances in manufacturing, 7th International Conference on Advanced

Manufacturing Technologies ICAMAT 2014, Bucuresti, Oct 2014 (Plenary Lecture).

6. M. Vrh, D. Banabic, Simple and robust user-independent time dependent evaluation of beginning

of instability for the FLC determination, Workshop on Time-dependent Methods for the Evaluation

of FLC, Zurich, November 2014.

7. D. Banabic, Trends in virtual manufacturing, ASTR 2014 Conference, Sibiu, November 2014

8. L. Paraianu, S.D. Comsa, D. Banabic, Influence of the identification procedure of the yield

criterion on the thickness prediction of the square, ESAFORM 2014 Conf., Espoo, May 2014.

9. S. Bruschi, T. Altan, D. Banabic, Testing and Modeling of Material Behavior and Formability in

Sheet Metal Forming Processes (Keynote Paper), CIRP General Assembly, Nantes, August 2014

10. Giacomelli et al, The influence of heat treatment on the wear resistance of titanium allois",

Conferinta si buletinul AFASES, Academia Fortelor Aeriene Henry Coanda,Brasov, 22-24 mai 2014;

9

11. Pascu, D.R.,Dragoi, S.,Serbu, D.Surcel, D., Tehnologie de sudare a conductelor din otel OLT45-

RG de la sistemul de transport produse chimice, Vol. Conferintei Internationale a Asociatiei de

Sudura din România, SUDURA 2014, 23-25 aprilie 2014, Sibiu

12. Pascu, D.R., Duma, I., Dascau, H., Evaluarea tenacitatii metalelor depuse prin sudare cu sârma

G3Si2, ø1,2 mm, pe otel marca S355J4G2, Vol. Conferintei Internationale Tehnologii inovative

pentru Imbinarea materialelor avansate, TIMA 2014, 19-20 iunie 2014,Timisoara

13. Dobra, M.R., Pascu, D.R., Farbas, N., Popa, D., Evaluarea fisurarii Imbinarii sudate tip tub de

cracare-weldolet confectionate din superaliaje pe baza de Ni-Cr, Revista Sudarea si Incercarea

Materialelor, BID-ISIM, 2014, nr.3, pp. 19-21

14. Mitrica D., Burada M., Florea R.M., Ghita M., Alexandrescu E., Soare V., Moldovan P.:

Microstructural characterization of aluminium metal-matrix composite prepared by in situ method,

2014, TMS (The Mineral, Metals and Materials Society), San Diego, California, CA, USA, 16

February -20February 2014. Publicarea articolului in Light Metals 2014, pp. 393-400 (ISI)

15. Moldovan .P, Ioana A., Constantin N., Preda A., Besea L, Eficientizarea functionarii cuptorului

electric prin modelare matematica, International Conference of Materials Science and Tehnologies,

(RoMAT 2014)

16.Moldovan P., Constantin N., Ioana A., Preda A., Besea L., Elemente tehnologice si economice

privind laminarea la cald pe linia ASSEL la T.M.K. Slatina, International Conference of Materials

Science and Tehnologies, (RoMAT 2014)

17. Moldovan P., Constantin N., Preda A., Besea L, Mathematical Modelling Option of the

Aluminium Alloys Melting and Casting Processes, International Conference of Materials Science

and Tehnologies, (RoMAT 2014)

18. Ioana A., Moldovan P., Constantin N., Preda A., Besea L, Applicable Neural Networks and

Fuzzy System in the Aluminium Industry, International Conference of Materials Science and

Tehnologies, (RoMAT 2014)

19. Dragomir D, Cojocaru M., Druga L., Kolozsváry and Berbecaru A, Influence of Rare Earth

Metals on Carburizing Kinetics of 21NiCrMo2 Steel, International Conference of Materials Science

and Tehnologies, (RoMAT 2014)

20. Cojocaru M, Dragomir D, Druga L, Kuncser V and Badica P., The effect of Ce added to

carburizing paste on the phase composition of carburized surface layers, International Conference of

Materials Science and Tehnologies, (RoMAT 2014).

21. A.O. Mateescu, G. Mateescu, L. Craciun, C. Ionescu, I. Burducea, Morfological and

compositional investigations of the tribological coatings with ternary composition from compound

materials, obtained by magnetron sputtering deposition methods, International Balcanic Workshop

on Applied Physics (IBWAP), Constanta, 2-4 July 2014. ISI Proceedings.

10

22. A.O. Mateescu, G. Mateescu, L. Craciun, C. Ionescu, C. Samoila, D. Ursutiu, D. Munteanu, D.

Cristea, V. Jinga, Mechanical and tribological behaviour of the multilayer dry lubricant coatings with

ternary composition from compound materials (TixNy; TiB2/ TixByNz; WC/ WxCyNz),International

Balcanic Workshop on Applied Physics (IBWAP), Constanta, 2-4 July 2014. ISI Proceedings.

23. A.O. Mateescu, G. Mateescu, C. Samoila, D. Ursutiu, D. Munteanu, D. Cristea, V. Jinga,

Tribological tests for nanostructured dry lubricant multi-layer coatings, ROCAM-2014 Conference-

ISI Proceedings.

24.Ursutiu, D., Dabacan.M., Samoila,C, Creative educational tools and LabVIEW, 42nd

IGIP

International Conference on Engineering Pedagogy-The global challenges in engineering education,

Kazan, Rusia, ISBN-978-5-7882-1457-3, pp 266-274;

25. Samoila, C., Ursutiu, D., Remote experiment a workplace for intangible knowledge, 42nd

IGIP

International Conference on Engineering Pedagogy, The global challenges in engineering education,

Kazan, Rusia, ISBN-978-5-7882-1457-3, pp 266-274;

26. Ursutiu, D., Dumitru.I., Samoila, C., - “Student Educational Device for Electronic Applications-

Student EDEA”, 42nd

IGIP International Conference on Engineering Pedagogy –“The global

challenges in engineering education, Kazan-Rusia-ISBN-978-5-7882-1457-3, pp 266-274;

27. Nascov, V., Samoila, C., Ursutiu, D., Corrosion monitoring by optical inspection with coherent

and incoherent light”, Conferinta Internationala INDLAS-Bran -25-28 Mai 2014, pp 25 -31;

28.Ravariu,C., Ursutiu,D., Babarada, F., C.I Targoviste, Janel,A., Arama,S., Samoila,C., Electronic

circuits dedicated for new platforms in electrophsychology-new topics for solid state circuits,

Conferinta Internationala - New trends on Sensing-Monitoring-Telediagnosis for Life Sciences”-

Brasov, Romania, 2014, ISBN 978-973-131-280-4, pp144.

29. Floroian,L., Zoita,N.C., Floroian,D., Samoila,C., Polymers in drug delivery, Conferinta

Internationala “New trends on Sensing-Monitoring-Telediagnosis for Life Sciences”-

Brasov,Romania-2014-ISBN 978-973-131-280-4, pp.144.

30. Floroian,L., Badea,M., Floroian,D., Samoila,C., Bioactive and antimicrobian nanostructured

layers for coating of implants”, Conferinta Internationala - New trends on Sensing-Monitoring-

Telediagnosis for Life Sciences, Brasov, Romania, 2014, ISBN 978-973-131-280-4, pp.144.

31.Ursutiu, D., Moga,M., Samoila,C., Ravariu,C., Wireless technology and virtual instrumentation in

sensing-monitoring-telemedicine”, Conferinta Internationala - New trends on Sensing-Monitoring-

Telediagnosis for Life Sciences”-Brasov, Romania-2014-ISBN 978-973-131-280-4, pp.144.

32.Samoila, C., Ursutiu, D., Dudita , M., Jinga,V., Nanostructured copper coatings used as textured

structure for cBN and TiN hard phase deposition, Conferinta Internationala - ICAMET 2014: 3rd

International Conference on Advanced Materials Engineering & Technology , 5th - 6th December

2014, Ho Chi Minh City, Vietnam.

11

33.Ursutiu,D., Samoila, C., Moga, M., Jinga,V, New hardware (beta testing) with potential to be

used in medical care using wireless technology and Virtual Instrumentation, ICMERA 2014:

International Conference on Samrt Systems in All Fields of the Life - Aerospace, Robotics,

Mechanical Engineering, Manufacturing Systems, Biomechatronics, Neurorehabilitation and Human

Motility, 24-27 Octombrie, Bucuresti, Romania

34.Ursutiu,D., Samoila,C., Epure, P., Student EDEA and myDAQ in education & research

laboratory, 11th

International Conference REV (Remote Engineering and Virtual Instrumentation) 26-

28 Feb. Porto-Portugal, IEEE-Xplore Digital Library, IEEE Catalog Number CFP-1449T-ART,

ISBN -978-1-4795-2024-2, pp.65-69;

35.Samoila,C., Ursutiu, D., Improvement of correlations between external and learning environment

using the remote engineering”, 11th

International Conference REV (Remote Engineering and Virtual

Instrumentation) 26-28 Feb. Porto-Portugal, IEEE-Xplore Digital Library, IEEE Catalog Number

CFP-1449T-ART, ISBN -978-1-4795-2024-2, pp.65-69.

36.Ravariu,C., Ursutiu,D., Babarada, F., Arhip, J., Arama, S.S., Radulian, G., Samoila, C., Remote

measurements of the electrical signals between theory and practice, 11th

International Conference

REV (Remote Engineering and Virtual Instrumentation) 26-28 Feb. Porto-Portugal, IEEE-Xplore

Digital Library, IEEE Catalog Number CFP-1449T-ART, ISBN -978-1-4795-2024-2, pp.65-69.

37. Kolozsvary Z., New developments and orientation in materials science - effect on surface

engineering. Keynote lecture, The 2nd International Conference on Energy and the Future of Heat

Treatment and Surface Engineering (IFHTSE), Beijing, 11-13 October, 2014.

38. N Halem, Z Halem, M Abrudeanu, G Petot-Ervas: Influence of CaO or CeO2 coatings on

oxidation of nikel polycristals, EUROCORR 2014.

39. M Abrudeanu, P Ponthiaux, JP Millet, GA Plaiasu, X Balandraud, M Grediac, J Huez, S Stanciu,

V Rizea, MM Dicu: Romanian-French Collaboration for Master and Doctoral Sudies in Materials

Engineering, AppliedMecanics and Materials , Vol.657(2014)pp1003-1087.- Conferinta IMANE

Chisinau 2014

40. M. M. Codescu, W. Kappel, E. Chitanu, E. Manta, C. Morari, D. Patroi, E. Patroi, R. Erdei, I.

Balan, D. Popa, Flexible Composites Based on Glass-Coated Microwires for Electromagnetic Shields

Materials, poster prezentat la cel de-al 9-lea Workshop International de

Compatibilitate Electromagnetica, Timisoara, 2014

41. E. Chitanu, M. M. Codescu, D. Patroi, E. Manta, W. Kappel, V. Marinescu, Synthesis by co-

precipitation of Zn, Ni and Zn0.5Ni0.5 - mixed spinel nanoferrites, poster prezentat la a II-a editie a

Conferintei Internationale de Chimie Analitica ICAC-2014, Targoviste 2014

42. Ioan Stefanescu, M. Varlam, E.Carcadea Realizari si provocari in tehnologiile de dezvoltare a

pilelor de combustibil cu hidrogen – cazul Romaniei, Conferinta Stiinta moderna si energia -

12

Producerea, Transportul si utilizarea energiei, SME 2014, ISSN 2066-4125, 15-16.05.2014, Cluj

Napoca, 161-169

43. Patularu L., S. Enache, D.Schitea, Ioan Stefanescu, M. Varlam, M.Raceanu, D.Ebrasu,

E.Carcadea, A.Craciunescu, Influenta compresiunii stratului de difuzie a gazului asupra performantei

pilelor de combustibil de tip PEM, Conferinta Stiinta moderna si energia - Producerea, Transportul si

utilizarea energiei, SME 2014, ISSN 2066-4125, 15-16.05.2014, Cluj Napoca, 122-129

44. Ioan Stefanescu, I. Iordache, M. Buga, D.Schitea, A.Marinoiu, M.Balan, Stocarea subterana a

hidrogenului, aspect din Romania, Conferinta Stiinta moderna si energia - Producerea, Transportul si

utilizarea energiei, SME 2014, ISSN 2066-4125, 15-16.05.2014, Cluj Napoca, 80-85

45. M. Buga, M Varlam, Ioan Stefanescu, I. Iordache, Procese biologice de producere a hidrogenului,

Conferinta Stiinta moderna si energia - Producerea, Transportul si utilizarea energiei, SME 2014,

ISSN 2066-4125, 15-16.05.2014, Cluj Napoca, 44-52

46. Schitea D., Patularu L., I. Iordache, Ioan Stefanescu, M. Varlam, Sisteme de umidificare in PEMFC,

Conferinta Stiinta moderna si energia - Producerea, Transportul si utilizarea energiei, SME 2014,

ISSN 2066-4125, 15-16.05.2014, Cluj Napoca, 130-142

47. A.Marinoiu, M. Varlam, I. Iordache, Ioan Stefanescu Utilizare de noi material carbonice in

cataliza proceselor electrochimice cu aplicatii pentru pilele de combustibil, Conferinta Stiinta

moderna si energia - Producerea, Transportul si utilizarea energiei, SME 2014, ISSN 2066-4125, 15-

16.05.2014, Cluj Napoca, 97-101

48. Gh.Ionita, C. Bucur, I. Spiridon, Ioan Stefanescu, Detritiation of heavy water by catalysed

isotopic exchange in liquid phase, Conferinta Nuclear 2014, Pitesti, 28-30.05.2014

49. D. Stegarus, V. Niculescu, C. Sandru, R. Ionete, Ioan Stefanescu, O. Tita, Determination of

Hazardous levels of Some Metal Ions in Romanian Wines, International Conference on Production

Research (ICPR) – International Conference Quality and Innovation in Engineering and Management

(AEM) organizata de Univeristatea Tehnica din Cluj Napoca, 01-05.06.2014

50. Culcer Mihai, Iliescu Mariana, Varlam Mihai, Stefanescu Ioan, F, Hydrogen based technology

for balancing load and generation within the grid, orumul roman al energiei, Bucuresti, 22-

26.07.2014

51.Large scale hydrogen under grounds storage in Romania, a way to manage renewable energy

sources, Schitea Dorin, Iordache Ioan, Marinoiu Adriana, Balan Mihai, Buga Ramona, Stefanescu

Ioan, Varlam Mihai, Forumul roman al energiei, Bucuresti, 22-26.07.2014

52.A parametric study for a PEM fuel cell with serpentine flow fields, E.Carcadea, M. Varlam, Ioan

Stefanescu, L.Patularu, A.Marinoiu, V.Tanislav, Eficienţa şi Inovaţie prin Simulare Numerica,

ANSYS&FLOWMASTER,18-19.09.2014,Sinaia

13

E) Participare la proiecte de cercetare (18)

1. Cercetari privind stabilirea cauzelor aparitiei neomogenitatilor structurale in vederea diminuarii

/eliminarii lor in produsele din ATSi7Mg03 de tip bara", Beneficiar S.C. ALRO Slatina S.A., prof.

Giacomelli

2. Analiza posibilitatilor de obtinere a microstructurilor de aliaje amorfe si achititionarea unor

componente de la HVOF, Beneficiar ANCS Bucuresti; coordonator prof. Pascu

3. Achizitionarea pupitrului de comanda a instalatiei HVOF si caracterizarea straturilor amorfe

Realizarea depunerilor si evaluarea fenomenelor de uzare abraziva a straturilor dure depuse prin

sudare, Beneficiar ANCS Bucuresti; coordonator prof. Pascu

4. Evaluarea fenomenului de uzare abraziva a straturilor dure depuse prin sudare cu aliaje pe baza de

Ni., Beneficiar ANCS Bucuresti Stadiul actual al depunerilor dure prin sudare. Conceperea

programului experimental, Beneficiar ANCS Bucuresti; coordonator prof. Pascu

5.Evaluarea fenomenului de uzare abraziva a straturilor dure depuse prin sudare cu aliaje pe baza de

Ni-Fe-Cr si Co; coordonator prof. Pascu

6.Raport tehnic privind avarierea imbinarilor sudate tub decracare - weldolet de la S.C. Donau,

Beneficiar S.C. Donau,Turnu-Magurele; coordonator prof. Pascu

7. Determinare cauza rupere ax portant grila 3RG, Beneficiar OMV Ploiesti, coordonator prof. Pascu

8. Evaluation of the wear resistance of chromium based hard coating and the development of the

Expert System, Beneficiar VATI Budapesta, Project Cross-Border - HURO 1001/2.3.4/2.2.2,

Program Hungary – Romania; coordonator prof. Pascu

9. Evaluation of the wear resistance of chromium based hard coatings, Beneficiar VATI Budapesta,

Project Cross-Border – HURO 1001/2.3.4/2.2.2, Program Hungary – Romania; coordonator prof.

Pascu

10. Proiect FP7 Facilitati, FP7 Specific Programme 'Capacities' - Optimising the use and

development of research infrastructures: Disulphide of molybdenum nanostructure synthesis and

characterisation for obtain greases with hight adhesion to metals – NANODISMOLY-2014 under

SFERA (Solar facilities for the European research area)- PROMES Four Solaire Odeillor Franta ,

Coordonator prof. Abrudeanu

11.Nanoferite durificate prin interactie de schimb, acronim X-CHANGEnFER, Colaborare stiintifica

bilaterala Romania – China poz. 58, cf. Listei propuneri de proiecte depuse România - China 2015 –

2016, Responsabil proiect prof. Ioan Stefanescu

12. Materiale pe baza de grafene pentru electrozi in supercapacitori, acronim GraphEIMat

Colaborare stiintifica bilaterala Romania – China poz. 59, cf. Listei propuneri de proiecte depuse

România - China 2015 – 2016, Membru in echipa de cercetare, prof. Ioan Stefanescu

14

13.Cercetari si transfer de expertiza privind noi instalatii de biogaz destinate tratarii deseurilor si

reducerii dependentei de combustibili fosili la nivel local si regional, acronim BIOEXPERT

Colaborare stiintifica bilaterala Romania – China,poz. 1, cf. Listei propuneri de proiecte depuse

România - China 2015 – 2016,Membru in echipa de cercetare, prof. Ioan Stefanescu

14. Evaluation of the NdFeB-based permanent magnets behaviour in extreme working conditions:

ionizing radiations, low temperatures,CAPACITATI RO-CERN,6/04.2014, Persoana cheie, prof.

Ioan Stefanescu

15. Miniature high-performance sensing technology based on magnetic micro and nanowires for

biomedical and environmental applications, SENSOWIRE – pre-propunere, M ERA NET Plus

Russia rusplus_s&t-233,Persoana cheie, prof. Ioan Stefanescu

16. Exploring electrical double layer capacity and redox activity of nanocomposites and

functionalized graphene, Competitive call for aditional partners in the GRAPHENE project / 04 –

Catalyst for energy applications,9130/05.02.2014,Membru in echipa de cercetare, prof. Ioan

Stefanescu

17. Investigation of Crystalline and Magnetic Properties of Nanostructured Ferrites, Hardened by

Exchange Interactions, Colaborare stiintifica bilaterala cu IUCN Dubna.Protocol de Colaborare nr.

4210-4-15/17 / 2014, Membru in echipa de cercetare, prof. Ioan Stefanescu

18. Magneti permanenti cu continut redus de pamant rar, Program Nucleu.ctr. 5103/2014, prof. Ioan

Stefanescu

F) Membri in comitetele stiintifice ale unor conferinte internationale sau ale unor reviste de

specialitate

Druga L, International Conference of Materials Science and Tehnologies, (RoMAT 2014)

Druga L, Surface Engineering revue, ISSN 1426-1723, Warsawa, Polland

Kolozsvary Z., Workshop - New developments in engineering material and the effect on heat

treatment and surface engineering” in cadrul EUROPEAN CONFERENCE ON HEAT

TREATMENT AND SURFACE ENGINEERING. 21ST

IFHTSE CONGRESS

Kolozsvary Z., Workshop In tematica proiectului EU „LoCoLite”, in cadrul Centrului de Cercetare -

Dezvoltare al Fiat, Torino Italia

Voicu S., Conferinta Internationala -Tehnologii inovative pentru Imbinarea materialelor avansate,

TIMA 2014, organizata de ISIM Timisoara

Pascu R., Conferinta Internationala - Tehnologii inovative pentru Imbinarea materialelor avansate,

TIMA 2014, organizata de ISIM Timisoara

Pascu R., Conferinta Internationala Tinerii si cercetarea multidisciplinara - 2014“, organizata de

ACM-V Timisoara

15

G) Membri in conducerea unor Asociatii profesionale interne si internationale

Druga L., Presedinte al Sectiei de Stiinta si Ingineria Materialelor a ASTR.

Druga L., Presedinte al Asociatiei de Tratamente Termice si Ingineria Suprafetelor

Vida-Simiti I., Presedintele Comitetului Tehnic CT-46 de standardizare (ASRO) in domeniul

Metalurgiei Pulberilor;

Vida-Simiti I., Decanul Facultatii de Stiinta si Ingineria Materialelor /Ingineria Materialelor si a

Mediului, Universitatea Tehnica din Cluj-Napoca;

Vida-Simiti I., Membru in Consiliul de administratie al Universitatii Tehnice din Cluj - Napoca;

Vida-Simiti I., Membru in Comisia de Specialitate: Stiinta Materialelor a (CNADTCU);

Vida-Simiti I., Membru in Comisia Stiinte ingineresti ARACIS;

Vida-Simiti I., Membru in Comisia de Specialitate: Ingineria Materialelor si Nanotehnologii a

Consiliului National de Atestare a Titlurilor Diplomelor si Certificatelor Universitare (CNADTCU);

Vida-Simiti I., prezent - Membru In Colegiul Consultativ de Cercetare Dezvoltate Inovare (CCCDI)

– vicepresedintele comisiei Eco-Nanotehnologii si Materiale avansate

Voicu S., Membru in Colectivul de Redactie al revistei SUDURA a Asociatiei de Sudura din

România

Voicu S., Membru in Colectivul de Redactie al revistei Sudarea si Incercarea Materialelor, BID-

ISIM, editata de Institutul National de Cercetare-Dezvoltare in Sudura si Incercari de Materiale,

ISIM Timisoara

Banabic D., Presedinte al Asociatiei Europene de Deformarea Materialelor - ESAFORM

Banabic D., Vicepresedinte al Sectiei de Stiinte Tehnice a Academiei Romane

Banabic D., Vicepresedinte al Consiliului Cercetarii al Universitatii Tehnice din Cluj Napoca

Banabic D., Director al Scolii Doctorale a Facultatii de Constructii de Masini din cadrul Universitatii

Tehnice din Cluj Napoca

Stefanescu I., Presedintele Comisiei de Manifestari Stiintifice si Expozitionale

Stefanescu I., Presedintele Comisiei de Materiale din cadrul consortiului pentru elaborarea Strategiei

de CDI pentru 2014-2020 si a Planului National corespunzator de CDI;

Bucuresti, 02.02.2015 Presedinte Sectie

Prof. Dr. Ing. Leontin Druga