Complementary Building Products Roof Hatches • Smoke Vents Right to site. ®
Complementary Bui ld ing Products
R o o f H a t c h e s • S m o k e V e n t s
Right to site.
®
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 32
Nystrom Roof HatchesNystrom’s Roof Hatches and Scuttles are manufactured to solve all of your roof access needs. Custom sizing, materials, and color finishes ensure that whatever you need for your project, we’ve got you covered. Shipped direct from our central manufacturing facility or from one of our strategically located stocking facilities, Nystrom delivers the hatches you need ... Right to Site. Latch: Interior, zinc plated steel slam
latch with interior padlock hasp.
Hinge/Springs: Tamper proof, heavy-duty zinc plated steel designed as part of spring assembly. Steel compression springs enclosed in telescopic tubes
Curb: 12” high single wall curb with EZ tab counterflash.
Roof Hatch Curb EZ Tab Detail
Cover: Stiffened to withstand a live load of 40 psf with a max deflection of 1/150th of the span. Cover withstands a standard wind uplift of 20 psf.
Turn Handle: Zinc-plated steel exterior weather sealed turn handle with
exterior padlock hasp.
Finish: Superior corrosive resistant factory-applied
powder coat paint, standard gray.
Hold Open Arm Assembly: Locking hold open arm with red grip pull handle release. Holds door open to 78°.
Mounting Flange: 3.5” flange with .625” diameter bolt holes.
Insulation: 1” rigid fiberboard insulation at curb perimeter and 1” polystyrene in cover.
Feature Specifications
PersonnelNystrom’s Personnel roof hatches provide safe, easy and convenient access to rooftop areas. Sizes available to accommodate fixed ladders, ship stairs and service stair applications.
SunLit™
Nystrom’s SunLit roof hatches provide safe, easy, and convenient personnel roof access with the added “green” benefit of daylighting.
SecurityNystrom’s Security roof hatches provide safe, easy, and convenient personnel roof access for traditional security applications like banks and correctional facilities in addition to homeland security concerns (ex. embassies, water treatment facilities, chemical plants).
EquipmentNystrom is known industry-wide for our expertise in custom, exceptionally large equipment access roof hatches designed to meet clear, unobstructed opening requirements to install and replace equipment, such as pumps for water treatment plants.
Roof HatchesRoof Hatches
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 54
RHP: PersonnelRHP: Personnel
Ship Stair Access Model shown: RHPG30X54S1T
Service Stair AccessModel shown: RHPG30X96S1T
Ladder Access Model shown: RHPG36X30S1T
9300 73rd Avenue NorthBrooklyn Park, MN 55428
5/25/2011 WEIGHT: Weight
REV
TITLE:
NAME DATE
SHEET 1 OF 1
TODAYDWODKL B
SIZE
RELEASEDDRAWN
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NYSTROM. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NYSTROM IS PROHIBITED.
12345678
8 7 6 5 3 2 1
D
C
B
A
A
B
C
WITH SAFETY RAIL AND POST
D
36 X 30 ROOF HATCH
4
-
DWG. NO.
26600
26600
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BABCOCK-DAVIS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BABCOCK-DAVIS IS PROHIBITED.A
PRODUCT GUIDE
LADDER
36 X 3036 X 3648 X 48
SHIP STAIR
30 X 5436 X 54
SERVICE STAIR
30 X 9636 X 96
48 X 120
SIZE (WIDTH & LENGTH)
LENGTHMATERIAL CURBWIDTH
RHP x S T
A 11 GA ALUM. CURB & COVER, MILL FINISH
B 14 GA GAL. CURB POWDER COAT GRAY & 11 GA ALUM. COVER MILL FINISH
G 14 GA GAL. CURB & COVER, POWDER COAT GRAY
MATERIAL
1 SINGLE WALL
2 DOUBLE WALL
3 CURB MOUNT
4 DOUBLE WALL, NO COUNTERFLASH
CURB TYPE
.625” BOLT HOLE
COVER LINER
.8”
12”
Width (Rough Opening)
7”
3.5” Typ.
Roof HatchesRoof Hatches
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 76
RHL: SunLit™ RHS: Security
Detention Lock shown with Brass Cover Plate for outside access
View Port Window
PRODUCT GUIDE
36” X 30” 30” X 54” 36” X 36” 48” X 48”
SIZE (WIDTH & LENGTH)
LENGTHMATERIAL CURBWIDTH
RHL x S P
A 11 GA ALUM. CURB & COVER, MILL FINISH
B 14 GA GAL. CURB POWDER COAT GRAY & 11 GA ALUM. COVER MILL FINISH
MATERIAL
1 SINGLE WALL
2 DOUBLE WALL
3 CURB MOUNT
4 DOUBLE WALL, NO COUNTERFLASH
CURB TYPE
PRODUCT GUIDELENGTHMATERIAL CURB OPTIONSWIDTH
RHS x S T-
36” X 30”36” X 36”30” X 54”48” X 48”
SIZE
D11 DETENTION LOCK, BRINKS 7012 INT/EXT ACCESS
D12 DETENTION LOCK, BRINKS 7012 INTERIOR ACCESS
D13 DETENTION LOCK, BRINKS 7012 EXTERIOR ACCESS
OW1 VEIW PORT WINDOW, 8” X 8”, SECURITY GLAZING
OPTIONS
A 1/4” ALUM. CURB & COVER, MILL FINISH
B 3/16” STEEL CURB POWDER COAT GRAY & 1/4” ALUM. COVER MILL FINISH
G 3/16” STEEL CURB & COVER, POWDER COAT RED OXIDE
MATERIAL
1 SINGLE WALL
2 DOUBLE WALL
3 CURB MOUNT
4 DOUBLE WALL, NO COUNTERFLASH
CURB TYPE
11 GA. ALUMINUM COVERS18 GA ALUMINUM LINERS
R13 INSULATION
SINGLE DOMECLEAR POLYCARBONATE
UV COATED
1” INSULATION AROUND CURB
QUICK RELEASE PALM LATCH
PALM LATCH WITHINTERIOR PADLOCK HASP
.625” BOLT HOLE
.8”
12”
Width (Rough Opening)
7”
3.5” Typ.
COVER
TURN HANDLE WITH EXTERIOR PADLOCK HASP
LATCH HANDLE WITH INTERIOR PADLOCK HASP
DETENTION LOCK1” INSULATION
LINER
.625” BOLT HOLE
.8”
1” INSULATION
12”
3.5” Typ.Width (Rough Opening)
Roof Hatches
Nystrom’s SunLit Roof Hatches provide safe, easy, and convenient personnel roof access with the added “green” benefit of daylighting.
Roof Hatches
Nystrom’s Security Roof Hatches provide safe, easy, and convenient personnel roof access for traditional security applications such as, banks, correctional facilities, and buildings with homeland security concerns (e.g. embassies, water treatment facilities, chemical plants).SunLit™
Model shown: RHLA36X30S1P
SecurityModel shown: RHSG48X48S4T-D11
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 98
RHE: Equipment SR: Safety Railing
Front ExitNystrom standard safety railing system for roof hatches with the fixed ladder mounted opposite the hinge.
Side ExitNystrom standard safety railing system for roof hatches with a side exit typical in ship stair and service stair applications. Shown with self-closing gate option.
Side Exit
PRODUCT GUIDE
48” X 48” 60” X 60” 72” X 72”
96” X 96”120” X 120”150” X 150”
SIZE (WIDTH & LENGTH)
LENGTHMATERIAL DOOR CURB OPTIONSWIDTH
RHE x T-
S SINGLE DOOR
D DOUBLE DOOR
DOOR
OSS STAINLESS
STEEL HARDWARE
OPTIONS
A 11 GA ALUMINUM CURB & COVER, MILL FINISH
B 14 GA GAL. CURB POWDER COAT GRAY
& 11 GA ALUM. COVER MILL FINISH
G 14 GA GAL. CURB & COVER, POWDER COAT GRAY
S 14 GA STAINLESS STEEL 304 CURB & COVER, MILL FINISH
MATERIAL
1 SINGLE WALL
2 DOUBLE WALL
3 CURB MOUNT
4 DOUBLE WALL, NO COUNTERFLASH
CURB TYPE
PRODUCT GUIDE
30” X 54” 36” X 36” 36” X 96” 48” X 48” 36” X 30”
SIZE (WIDTH & LENGTH)
F FRONT EXIT
S SIDE EXIT, SINGLE DOOR
D SIDE EXIT, DOUBLE DOOR
EXIT LOCATION
C CHAIN
G SELF-CLOSING GATE
OPTIONS
LENGTH EXIT OPTIONSWIDTH
SRCG x
COUNTERFLASHING1” INSULATION AROUND CURB INTERIOR TWO POINT ROTARY LATCH
WITH TURNHANDLE AND PADLOCK HASP
TURN HANDLE WITHEXTERIOR PADLOCK HASPCOVER
1” INSULATION
DOORS OPEN FULLY 90°
.625” BOLT HOLE
.8”
12”
20” Ref
3.5” or 4” Typ.Width (Rough Opening)
Clear Opening (Subtract 8” from Rough Opening)7”
Material: 1 ¼” ID schedule 40 steel pipe Finish: Galvanized to ASTM A53 Pipe Caps: Weather and light resistant vinyl 1 ½” deep
and fit snugly over pipe ends Hardware: Hex head bolts 3/8” x 2 ½” grade Z, zinc
plated. Chain: 3/16” zinc plated with quick links and 2 ½”
zinc plated hoops on each end.
Optional: self closing gate 3/16” zinc plate steel straight link chain
Meets OSHA Standard CFR 29 1910.23
Roof Hatches
Nystrom is known industry-wide for our expertise in custom, exceptionally large equipment access roof hatches. Equipment Series hatches are designed with 90° opening doors to meet clear, unobstructed opening requirements.
Stainless steel hardware is a common configuration for corrosive environments typical in waste-water treatment plants.
Roof Hatches
Equipment Model shown: RHEA96X72D1T-OSS
Custom Curb HeightsNystrom offers custom curb heights to match the needs of any application. Standard curb height is 12”. Custom curb heights range from 6” - 48”.
Lock OptionsNystrom offers mortise cylinder locks for added security and detention locks for maximum security. Brass cover plates seal out the elements and are standard on hatches requiring exterior lock access. When ordering locks, specify for interior only, exterior only, or interior and exterior keyed access.
Mortise Cylinder Detention
Curb Type
Pitch-Corrected CurbsCurb is sloped to match roof pitch to maintain level doors to ensure proper operation. Recommended for roof pitches greater than 3:12.
InsulationImprove your building’s energy efficiency with upgraded and fully insulated roof hatches.
Nystrom offers polyisocyanurate insulation with an R value of 6 per inch in widths of 1”, 1.5”, and 2” in the curb and/or cover. It is also intended for applications where condensation is a concern.
LIMIT SWITCH
LIMIT SWITCH BRACKET
Grab BarsGrab bars are available to assist in opening and closing the hatch and are an extension of the stair rail to ensure hatch egress safety.
GRAB BAR
Door Position SensorDoor position sensors tie into the buildings alarm system for electrical signal notification of door usage and come pre-installed with required mounting brackets.
6”
18”
20”
24”
INSULATION
INSULATION
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 1110
Safety PostsNystrom safety ladder posts mount to fixed ladders beneath roof hatches complies with OSHA 1910.27 requirement for fixed ladders.
Safety NetNystrom safety nets mount beneath roof hatches. Complies with OSHA 1926.105 Netting test specification and OSHA 1926.502 Drop test specification.
SP: Safety Post Options
Model shown: SPY
Model shown: SNA 36X30-N
61 1/2"
1 13/16"
4
12" MAX PER OSHA
4" 2
1
3
5
6
7 8
SPECIFICATIONS1 LIFTING HANDLE
2 RELEASE ROD
3 EXTENSION LOCK BRACKET
4 BALANCING SPRING
5 SQUARE TUBING (1 1/2" x 1 1/2")
6 ADJUSTABLE MOUNTING CHANNEL FITS LADDER RUNG SPACING 10"-12"
7 CLAMP BRACKET
8 STAINLESS STEEL MOUNTING HARDWARE
CERTIFICATIONS: COMPLIES WITH OSHA 1910.27 REQUIREMENT FOR FIXED LADDERS
DESIGN LOAD OF 200 POUNDS
PART # DESCRIPTIONSPY STEEL, YELLOW POWDER COAT PAINTSPG STEEL, HOT DIPPED GALVANIZEDSPA ALUMINUM, MILL FINISHSPS 304 STAINLESS STEEL, MILL FINISH
DSP_CADDWG. NO.
Safety Post, Ladder Access
B
AA
B
12
2 1
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NYSTROM. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NYSTROM IS PROHIBITED.
DRAWNRELEASED
SIZE
ADKLKO
05/10/11SHEET 1 OF 2
DATENAME
TITLE:
REV
05/10/11
9300 73rd Avenue NorthBrooklyn Park, MN 55428
PART#:QTY:
CONTRACTOR:ARCHITECT:
PROJECT:
2
4
SPY
2
1
61 1/2"
1 13/16"
4
12" MAX PER OSHA
4" 2
1
3
5
6
7 8
SPECIFICATIONS1 LIFTING HANDLE
2 RELEASE ROD
3 EXTENSION LOCK BRACKET
4 BALANCING SPRING
5 SQUARE TUBING (1 1/2" x 1 1/2")
6 ADJUSTABLE MOUNTING CHANNEL FITS LADDER RUNG SPACING 10"-12"
7 CLAMP BRACKET
8 STAINLESS STEEL MOUNTING HARDWARE
CERTIFICATIONS: COMPLIES WITH OSHA 1910.27 REQUIREMENT FOR FIXED LADDERS
DESIGN LOAD OF 200 POUNDS
PART # DESCRIPTIONSPY STEEL, YELLOW POWDER COAT PAINTSPG STEEL, HOT DIPPED GALVANIZEDSPA ALUMINUM, MILL FINISHSPS 304 STAINLESS STEEL, MILL FINISH
DSP_CADDWG. NO.
Safety Post, Ladder Access
B
AA
B
12
2 1
PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NYSTROM. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NYSTROM IS PROHIBITED.
DRAWNRELEASED
SIZE
ADKLKO
05/10/11SHEET 1 OF 2
DATENAME
TITLE:
REV
05/10/11
9300 73rd Avenue NorthBrooklyn Park, MN 55428
PART#:QTY:
CONTRACTOR:ARCHITECT:
PROJECT:
2
4
SPY
SPECIFICATIONS:
SPECIFICATIONS:RAIL: EXTRUDED ALUM 6061 T61
NETTING: POLYESTER, ORANGE. BREAKING STRENGTH 500LBS.2
SN: Safety Net
PRODUCT GUIDEMATERIAL
SP
Y STEEL, YELLOW POWDER COAT
G STEEL, HOT DIP GALVANIZED
A ALUMINUM, MILL
S STAINLESS STEEL, MILL
MATERIAL & FINISH
PRODUCT GUIDE
30” X 18” 30” X 24” 36” X 30”
36” X 36” 48” X 48”
SIZE (WIDTH & LENGTH)
*Hatch Size = Railing Size
HEIGHTWIDTH
xSNA N-
Custom FinishesNystrom offer custom-matched colors. Our corrosion-resistant, colored powder coat provides aesthetics and durability while eliminating the additional costs of on-site painting for our steel hatches. Kynar® finishes available for aluminum hatches.
Roof Hatches Roof Hatches
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 1312
Nystrom Smoke VentsNystrom’s smoke vents are designed to meet the highest industry safety standards. Nystrom offers a wide range of options and solutions that fully integrate with the fire and life safety of building and comply with International Building Code (IBC).
Cover: Cover is stiffened to withstand a live load of 40 psf.
Latch: Zinc plated rotary latch assembly holds
covers closed against 90 psf wind uplift
Gas Spring with Damper: Opens against 10 psf snow load in not less than 2 seconds
Finish: Powder coat paint, ANSI 70 gray.
External Pull Handle
Insulation: 1” polyisocyanurate at curb and in cover, R-value 6
Temperature:Fusible melt-out link available in 165°F, 212°F, 280°F, 350°F, 360°F, 370°F, 386°F, and 450°F.
Manual Opening:External and internal pull handles provided
Electrical:24VDC/24VAC or 110VAC/240VAC electrical signals enable automatic vent opening when tied into buildings fire alarm system, smoke detector, or sprinkler system.
Watts:
Manual Winch:Manual winch provides door closing from the floor level.
Motor:Operate smoke vent with push button controller (open, close, stop) 1/2 HP, 110VAC motor with 24VDC relay for electrical vent opening when tied to a fire alarm system.
Curb: 12” high single wall curb and counterflash with EZ tab
Feature SpecificationsHold Open Arm: Locks and
holds doors fully open. Red grip handle for easy release.
EMERGENCY OPENING OPTIONS REMOTE CLOSING OPTIONS
Fusible Link
Thermal Release Mechanism: Vent opens cover thermally by heat with fusible link
Manual Winch
3-Button Motorized
Door Control
AcousticalNystrom’s Acoustic smoke vents are acoustically rated to STC 45 & OITC 37 and have UL 793 & FM 4430 labels with energy efficient R13 insulation for optimal envelope performance. Designed for theater and stage applications, as required by IBC section 410.
Smoke VentsSmoke Vents
SunLit™
Nystrom’s SunLit smoke vents are rooftop venting systems with the added benefit of natural daylighting. These UL 793 listed vents are ideal for manufacturing factories, warehousing and bix box retail.
SmokEscape™
Nystrom’s SmokEscape™ smoke vents are UL 793 listed with an emphasis on affordability. Single doors are ideal for venting hoistways, elevator shafts or stairwells, reference IBC 3004. Double and Quad door sizes are ideal for factory and storage venting applications as required by IBC 910.
Nystrom is the exclusive manufacturer of UL793 listed single door smoke vents. Nystrom’s SmokEscape™ single door smoke vents are ideal for hoistway, elevator shaft and stairwell venting applications as required by International Building Code.
Nystrom’s SmokEscape™ double door smoke vents are ideal for factory, storage/warehouse, big box retail, and government postal facilities as required by IBC Section 910.
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 1514
SVS: SmokEscape™ SVS: SmokEscape™
PRODUCT GUIDE
SDOORMATERIAL CURBWIDTHLENGTH ELEC. TEMP CLOSING
SVS x
30” X 30” 48” X 48” 36” X 30” 48” X 72” 36” X 36” 48” X 96”
SIZE (WIDTH & LENGTH)
N NO ELECTRICAL
L 24VDC / 24VAC H 110VAC / 240 VAC
ELECTRICAL
165 350 212 360 280 450
TEMP ˚F
1 SINGLE WALL CURB
2 DOUBLE WALL CURB
3 CURB MOUNT
CURB
S SINGLE DOOR
D DOUBLE DOOR
Q QUAD DOOR
DOOR
A ALUM CURB & COVER, MILL FINISH
B GALVANNEALED CURB, POWDER COAT GRAY & ALUM COVER, MILL FINISH
G GALVANNEALED CURB & COVER, POWDER COAT WHITE
MATERIAL
R ROOFTOP (MANUAL) M 3 BUTTON OPERATED MOTOR
W MANUAL WINCH
CLOSING
PRODUCT GUIDE
DDOORMATERIAL CURBWIDTHLENGTH ELEC. TEMP
SVS xCLOSING
48” X 48” 60” X 60” 48” X 72” 60” X 96” 48” X 96” 60” X 120” 72” X 72” 72” X 96”
SIZE (WIDTH & LENGTH)
1 SINGLE WALL CURB
2 DOUBLE WALL CURB
3 CURB MOUNT
CURB
S SINGLE DOOR
D DOUBLE DOOR
Q QUAD DOOR
DOOR
R ROOFTOP (MANUAL) M 3 BUTTON OPERATED MOTOR
W MANUAL WINCH
CLOSING
N NO ELECTRICAL
L 24VDC / 24VAC H 110VAC / 240 VAC
ELECTRICAL
165 350 212 360 280 450
TEMP ˚F
A ALUM CURB & COVER, MILL FINISH
B GALVANNEALED CURB, POWDER COAT GRAY & ALUM COVER, MILL FINISH
G GALVANNEALED CURB & COVER, POWDER COAT WHITE
MATERIAL
12”
6.5”
WIDTH
Smoke Vents Smoke Vents
®
®
WIDTH
12”8”
SmokEscape™
Model shown: SVSG48X96D1N165R
SmokEscape™
Model shown: SVSG36X30S1N165R
12”
8”
WIDTH
3
101
6
9
11
5
7
8
12
2
13
"
"
B
B
A A
SECTION A-A
12"
LENGTH 3 1/2" "
8"
SECTION B-B
"WIDTH
2
SMOKE VENT SIZE (WIDTH) x (LENGTH)
EFFECTIVE VENTING AREA 90% SQFT
C LU US
ELECTRICAL RELEASE:
LISTED
R
UL793
VENT COVERS OPEN ELECTRICALLY WHEN ENERGIZED WITH
CURB AND COUNTERFLASH W/ EZ TAB:
CURB- MILL
LATCH: ZINC PLATED ROTARY LATCH ASSEMBLY DESIGNED TO HOLD COVERS CLOSED AGAINST 30 PSF WIND UPLIFT ZINC PLATED STEEL LATCH STRIKERS ON COVERS
5
11 GAUGE
POLYCARBONATE MULTI-WALL WHITE
FINISH:
2
4 COVER- MILL
6 A 10PSF SNOW LOAD IN NOT LESS THAN 2 SECONDS
DESIGNED TO OPEN AGAINST GAS SPRING WITH DAMPER:
HOLD OPEN ARM: LOCK COVER IN FULLY OPEN POSITION -
TRANSLUCENT MATERIAL:
7 ZINC PLATED STEEL
ALUMINUM3
DEFLECTION OF 1/150 OF THE SPAN
SPECIFICATIONS:1 COVER: ALUMINUM EXTRUSION WITH 11GA ALUM RETAINER
TO WITHSTAND A LIVE LOAD OF 40 PSF WITH A MAX
8 HINGES: ZINC PLATED STEEL WITH STAINLESS STEEL HINGE PINS
9 INSULATION: 1" POLYISOCYANURATE IN COVER AND AROUND CURB PERIMETER, R-VALUE 610 GASKET: ADHESIVE BACKED EPDM RUBBER EXTRUSION
11 THERMAL RELEASE MECHANISM: VENT COVERS OPEN THERMALLY BY HEAT AT FUSIBLE LINK TEMPERATURE F12 MANUAL OPENING:VENT COVERS OPEN WITH INTERNAL AND
EXTERNAL MANUAL PULL HANDLE, 1/16" DIA SST CABLE 13
ARCHITECT:
Brooklyn Park, MN 55428
SVLA_X_S1_ _R ADWG. NO.
Smoke Vent, SunLit SeriesAlum, Sngl Dr, Sngl Wall Curb
B
AA
B
12
2 1
CONTRACTOR:
PERMISSION OF NYSTROM IS PROHIBITED.
DRAWNRELEASED
SIZE
ABMHDS SHEET 1 OF 2
DATENAME
TITLE:
05/04/11
REV
05/04/11PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF NYSTROM. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN
WEIGHT: VARIES
SVLA X S1 RPART#:QTY:
9300 73rd Avenue North
PROJECT:
30.00
36.00
37
165 °F
36 30
6.8
36 30 165
43
Low High24VAC/DC
L
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 1716
SVL: SunLit™SVL: SunLit™
Nystrom’ SunLit™ smoke vents provide all the safety and value of the SmokEscape™ automatic vent with the added sustainable benefit of natural daylighting.
Nystrom’ SunLit™ smoke vents provide all the safety and value of the SmokEscape™ automatic vent with the added sustainable benefit of natural daylighting.
PRODUCT GUIDE
30” X 30” 48” X 48” 36” X 30” 48” X 72” 36” X 36” 48” X 96”
SIZE (WIDTH & LENGTH)
SDOORMATERIAL CURB TEMPELEC
SVLWIDTHLENGTH
x RCLOSING OPTIONS
-
1 SINGLE WALL CURB
2 DOUBLE WALL CURB
3 CURB MOUNT
CURB
LPW DOME, POLYCARB WHITE
LPC DOME, CLEAR
LMC MULTIWALL, CLEAR
OPTIONS
S SINGLE DOOR
D DOUBLE DOOR
Q QUAD DOOR
DOOR
R ROOFTOP (MANUAL) M 3 BUTTON OPERATED MOTOR
W MANUAL WINCH
CLOSING
N NO ELECTRICAL
L 24VDC / 24VAC H 110VAC / 240 VAC
ELECTRICAL
165 350 212 360 280 450
TEMP ˚F
A ALUM CURB & COVER, MILL FINISH
B GALVANNEALED CURB, POWDER COAT GRAY
& ALUM COVER, MILL FINISH
MATERIAL
PRODUCT GUIDE
48” X 48” 60” X 60” 48” X 72” 60” X 96” 48” X 96” 60” X 120” 72” X 72” 72” X 96”
SIZE (WIDTH & LENGTH)
DDOORMATERIAL CURB TEMPELEC
SVLWIDTHLENGTH
x RCLOSING OPTIONS
-
1 SINGLE WALL CURB
2 DOUBLE WALL CURB
3 CURB MOUNT
CURB
LPW DOME, POLYCARB WHITE
LPC DOME, CLEAR
LMC MULTIWALL, CLEAR
OPTIONS
S SINGLE DOOR
D DOUBLE DOOR
Q QUAD DOOR
DOOR
R ROOFTOP (MANUAL) M 3 BUTTON OPERATED MOTOR
W MANUAL WINCH
CLOSING
N NO ELECTRICAL
L 24VDC / 24VAC H 110VAC / 240 VAC
ELECTRICAL
165 350 212 360 280 450
TEMP ˚F
A ALUM CURB & COVER, MILL FINISH
B GALVANNEALED CURB, POWDER COAT GRAY
& ALUM COVER, MILL FINISH
MATERIAL
Light Transmision %: 30% 74% 37% 45% 42%Solar Factor %: 45% 75% 57% 65% 60%Shading Coefficient %: .50 .86 .65 .74 .69
Translucent Cover: Multiple-3-wall coextruded polycarbonite sheet 5/8” thick R-Factor: 2.5
Smoke Vents Smoke Vents
SunLit™
Model shown: SVLA60X60D3N165R
SunLit™
Model shown: SVLA36X30S3N165R-LPC
Multi-Wall Options
White Clear Bronze Blue Green
® ®
Right to site.
®
Right to site.
®
Copyright © Nystrom 2011 800.547.2635 • fax 800.317.8770 • Nystrom.com763.488.9200 • fax 763.488.9201 • Nystrom.com Copyright © Nystrom 2011 1918
PRODUCT GUIDEDOORMATERIAL CURB TEMPWIDTHLENGTH ELEC.
SVX x
3 CURB MOUNT
4 DOUBLE WALL CURB
CURB
D DOUBLE DOOR
Q QUAD DOOR
DOOR
G GALVANNEALED STEEL GRAY
W GALVANNEALED WALL CURB
MATERIAL
CLOSING
48” X 48” 60” X 60” 48” X 72” 60” X 96” 48” X 96” 60” X 120” 72” X 72” 72” X 96”
SIZE (WIDTH & LENGTH)
R ROOFTOP (MANUAL) M 3 BUTTON OPERATED MOTOR
W MANUAL WINCH
CLOSING
N NO ELECTRICAL
L 24VDC / 24VAC H 110VAC / 240 VAC
ELECTRICAL
165 350 212 360 280 450
TEMP ˚F
SVX: Acoustical
14 GA GALVANIZED STEEL COVER
ACOUSTIC BARRIER 12 GA GALVANIZED STEEL LINER
FIBERGLASS ACOUSITC INSULATION
INTERNAL & EXTERNAL MANUAL RELEASE HANDLE
.5” BOLT HOLE
.8”
8.4” MAX
13”
Width (Rough Opening) 4.75” Typ.
AcousticalModel shown: SVXW72X96D4N165R
®
Cover & Liner: 14 ga. galv. steel, 12 ga. galv. steel liner Cover is stiffened to withstand a live load of 40 psf with a max deflection of 1/150th of the span.
Curb Material: 13” high curb, 14 ga. & 12 ga. galv. steel double wall curb Hinge: Heavy-duty, zinc-plated steel with non-removable pins designed
as part of spring assembly Latch: Zinc-plated pryolatch with positive hold release mechanism
designed to withstand 90 psf of wind uplift. Released by interior and exterior manual pull cables and fusible melt-out link
Springs: High-pressure gas springs Insulation: 3” R13 fiberglass insulation in
cover and curb perimeter Flange: 4.75” flange (1.625” exposed)
with .5” diameter mounting holes Finish: ANSI 70 gray powder coat finish Testing: UL 793 Listed, FM 4430 approved, STC45 & OITC37 rating
Nystrom’s Acoustical Series smoke vents are ideal for venting heat and smoke from stages and platforms as required by IBC Section 410. Typical applications include assembly and educational occupancies including performing arts centers, theaters, symphony halls and school auditoriums.
Smoke VentsSmoke Vents
Options
Pitch-Corrected CurbsCurb is sloped to match roof pitch to maintain level doors to ensure proper operation. Recommended for roof pitches greater than 3:12.
Burglar BarsBurglar bars are available to prevent unauthorized entry.
Standard 1/2” diameter steel bar, 6” x 12” spacing, powder coat painted.
Custom Curb HeightsBabcock-Davis offers custom curb heights to match the needs of any application. Standard curb height is 12”. Custom curb heights range from 6” - 48”.
LightMAX dome optionsDomed options available for LightMAX series translucent smoke vents. Select from single or double dome polycarbonate in white, clear, or bronze.
Curb Type
Door Position SensorDoor position sensors tie into the buildings alarm system for electrical signal notification of door usage and come pre-installed with required mounting brackets.
6”
18”
20”
24”
Louvered CurbsLouvered curbs are available to satisfy your required free area venting requirements (ex: hoistway/elevator shafts).
Custom FinishesBabcock-Davis offers custom-matched colors. Our corrosion-resistant, colored powder coat provides aesthetics and durability while eliminating the additional costs of on-site painting for our steel hatches. Kynar® finishes available for aluminum hatches.
R o o f H a t c h e s • S m o k e V e n t s
Right to site.
®
9300 73rd Avenue North, Minneapolis, MN 55428 www.Nystrom.com ph: 800.547.2635 fx: 800.317.8770
1.0