Competency Standard - Signalling · Competency Standard - Signalling T HR CY 03000 ST Standard . Version 01. Issued date: 15 June 2016 . Important Warning . This document is one of
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Table 1 provides a list of high level functions and their description within any signalling roles.
Table 1 – Signalling functions and description
Function Description
Design The process of defining requirements or creating a solution or modifying the existing solution based on the identified requirements of that phase.
Check (review) A document based process of examination of the design to determine the adequacy of the output items of a specific development phase fulfils the requirements of that phase.
Verify A process of examination of the design followed by a judgement based on evidence that output items of a specific development phase fulfils the requirements of that phase in relation to completeness, correctness and consistency.
Approve A process based examination of the design to make sure all required steps have been completed in that phase in accordance with the approved quality requirements.
T HR CY 03000 ST Competency Standard - Signalling
Version 1.0 Issued date: 15 June 2016
Function Description
Construct (install) The process of realisation of the design by building one or more products or set up the product to be functional as specified within the design phase.
The application of these functions to a particular job or role is explained in the following
examples:
• Example 1
A design engineer responsible for designing a part of a subsystem in the signalling
infrastructure requires competency for signalling detailed design.
• Example 2
An experienced signalling engineer responsible for verifying the detailed signalling design
for a signalling system requires competencies in detailed design, checking / reviewing and
verification.
• Example 3
A commissioning engineer responsible for deploying a major system into service requires
competencies for the testing and commissioning functions.
5.4. Signalling functions and asset life cycle The functions within the signalling systems cover the following:
5.5. Defining prerequisite competence requirements The mandatory requirement for defining competence requirements is stated in
T MU MD 00009 ST AEO Authorisation Requirements.
The level and depth of the requirements depends on industry requirements or those required by
the standards.
An AEO's processes shall satisfy quality and safety requirements, as a minimum.
T HR CY 03000 ST Competency Standard - Signalling
Version 1.0 Issued date: 15 June 2016
As part of the AEO authorisation process, AEOs shall have their own competency assessment
process as described in T MU MD 00009 ST.
The AEO may tailor the competency standard requirements to meet the project or industry
needs in consultation with the relevant stakeholders to align with the project requirements. Any
modification to the competency requirements stated in Section 6, Section 7 and Section 8 shall
be justified and be subject to audit. The ASA shall establish and maintain consistency among
AEOs’ assessments using the surveillance audit mechanism.
5.6. Proficiency levels The AEO’s competency management system shall define the proficiency levels that are relevant
and current for any particular function in accordance with the requirements of
T MU MD 00009 ST. While the AEO is responsible for setting a proficiency level framework, the
proficiency levels provided in Table 2 are suggested as most appropriate to be used with this
standard.
Table 2 – Proficiency levels and description
Proficiency Description
Level 0 A person who has had no previous experience of a particular task or activity. Requires supervision while performing tasks.
Level 1 A person who has limited knowledge. Requires supervision in more complex tasks and activities to allow that person to gain relevant experience. May perform simple tasks unsupervised where previous experience can be demonstrated.
Level 2 A person who has sufficient knowledge allowing to work unsupervised in tasks and activities within the relevant experience. May perform more complex tasks unsupervised where previous experience can be demonstrated. Requires supervision to perform more complex activities and tasks where previous experience cannot be demonstrated.
Level 3 A person who has demonstrated knowledge and experience, who can work unsupervised in tasks and activities within their relevant experience. May perform more complex tasks unsupervised where previous experience can be demonstrated. Has the relevant experience to execute the duties in a senior position as a leader and has the ability to solve problems. Can interpret and apply applicable domain standards and principles. Is considered to be a subject matter expert (SME) and has the capability and experience to supervise.
Understanding of general signalling principles including signal positioning, calculation of braking distances, headways requirements and signal sighting
• assessment of logbook and currency of entries; these will typically include work experience storyboards detailing particulars of work carried out, training records (academic or industry) and so on
• demonstrate academic record to include relevant industry training
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
1.1 Application and interpretation of systems requirements specification (SRS) in the production of concept design Knowledge of producing signalling functional specification
E1, E7, E8, No specific domain or product requirements
1.2 Understanding of general signalling principles including signal positioning, calculation of braking distances, headways requirements and signal sighting Knowledge of ASA standards that cover signal design principles
1.3 Application of signalling principles in the production of concept design
E1, E9 Application of domain signal design principles such as ESG 100 Signal Design Principles Knowledge of domain signalling practices, Network Rules and Network Procedures Use of domain train modelling systems
Table 5 – Concept design - general technical skills and experience generic competency requirements
Item reference
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
2.1 Creates concept designs including supporting evidence for design decisions
E1, E5, E8 Knowledge of domain signalling systems, for example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
2.2 Interpret and analyse project scope, relevant functional and interface specifications, other documents determining the impacts of the project interfaces
E2, E3, E6 Knowledge of design requirements
2.3 Understands maintenance requirements in relation to signalling infrastructure Can recognise where RAMS is required and have input to the relevant client strategies to define system performance requirement
E1, E2, E3, E4, E5, E8
Knowledge of domain signalling equipment practices, such as ESG 003 Signalling Equipment Configuration Standard and ESG 004 Signalling Equipment Strategy and RAMS requirements
2.4 Carried out three previous similar size designs without supervision
E1, E2, E3, E4, E7
No specific domain or product requirements
2.5 Performed signalling design and carried out three previous similar size designs without supervision
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
3.1 Application and interpretation of higher level requirements in relation to railway operations
E1, E2, E3, E4, E5, E7, E8
Knowledge of producing domain subsystem requirements specification and operational requirement documentation
3.2 Understand and apply the railway operating rules and regulations pertaining to the signalling infrastructure
E1, E7, E8, Knowledge of domain signalling practices, for example, signalling practices and configuration standards, Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
4.1 Understand different discipline’s design requirement and applications, for example, track alignment, overhead alignment, civil structures and bridges
E1, E2, E3, E4, E5, E7, E8
Knowledge of domain design management process
4.2 Apply and interpret SRS in relation to production of the concept design
E1, E7, E8, No specific domain or product requirements
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
5.1 Understand the operator’s safety requirements Interpret and apply these requirements in the concept design where required
E1, E2, E3, E5, E6, E8
Knowledge of domain signalling practices, for example, signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008), Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
5.2 Interpret and analyse project safety requirements, to determine the impacts on the project life cycle
E1, E3, E4, E5, E7, E8
No specific domain or product requirements
5.3 Understand the safety requirements in relation to signalling infrastructure maintenance through the asset life cycle
E1, E3, E4, E5, E7, E8
Knowledge of domain requirements for signalling safeworking procedures
5.4 Interpret, analyse and apply risk mitigation associated with the project hazard analysis and risk assessment (HARA) process, where hazards, threats and safety issues are identified
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
6.1 Consider and interpret products’ safety requirements in a railway environment
E1, E3, E4, E5, E8
Knowledge of domain type approval requirements for signalling systems and equipment such as SPG 0710 Type Approval Requirements for Signalling Systems and Equipment
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
1.3 Understand and apply signalling standards in detailed design process
E1, E9 Application of domain signalling documentation and drawings standards Knowledge of domain circuit design standards, standard CBI system architectures and data constructs, such as Microlok 2
1.4 Management and distribution of the detailed design documentation through the project life cycle
E4, E5, E7, E8, E9
Application of domain signalling documentation and drawings standards
1.5 Verify and validate the veracity of documentation: • approval of detailed design
documentation • checking of detailed design
documentation • verification and review of detailed
design documentation
E1, E3, E5, E6, E7, E8, E9
Application of domain signalling documentation and drawings standards
1.6 Understand the testing and commissioning process: • process and respond to test logs • process and provision of design
modification
E1, E2, E3, E4, E6, E7, E8, E9
Knowledge of domain inspection and testing of signalling process
1.7 Consider product requirements Interpret and apply manufacturer product requirements and functional interfaces
E1, E2, E3, E6
Knowledge of domain signalling systems, for example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
1.8 Understand product operation in the rail environment and integration with other products
E1, E2, E3, E8
Knowledge of domain signalling systems, for example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
Table 11 - Detailed design – general technical skills and experience generic competency
requirements
Item reference
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
2.1 Creates detailed designs using project documentation: • understand and apply control
tables • understand and apply signal
arrangements plan • extract and implement SFS
requirements
E1, E2, E3, E5, E6, E8
Application of domain signal design principles and signalling practices Knowledge of domain circuit design standards, standard CBI system architectures and data constructs such as Microlok 2 Knowledge of producing domain SFS
2.2 Interpret and analyse project scope, relevant functional and interface specifications, other documents determining the impacts of the project interfaces
E1, E2, E3, E6, E7, E8
No specific domain or product requirements
2.3 Performed detailed signalling design and carried out three previous similar size designs without supervision
E1, E2, E3, E5, E6, E7
No specific domain or product requirements
2.4 Perform detailed signalling design under supervision of a suitably competent mentor
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
4.1 Interact with other disciplines to coordinate design, particularly in relation to other disciplines, for example, track, overhead, civil structures and bridges
E3, E4, E5, E6
Knowledge of domain design management process
4.2 Apply and interpret SRS in relation to testing and commissioning requirements
E3, E4, E5, E6, E7, E8
No specific domain or product requirements
4.3 Involved in the IDR process or meetings and applied outcomes
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
5.1 Understand operator’s safety requirements Interpret and apply these requirements in relation to signalling system life cycle
E3, E5, E6, E7, E8
Knowledge of domain signalling practices, Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
5.2 Understand the safety requirements in relation to signalling infrastructure maintenance through the asset life cycle
E1, E2, E5, E6, E8
Knowledge of domain requirements for signalling safeworking procedures
5.3 Understand, interpret, analyse and apply risk mitigation associated with the HARA process Identify hazards, threats and safety issues during the design life cycle
Table 16 - Detailed design – commission systems into service generic competency
requirements
Item reference
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
6.1 Understanding of the testing and commissioning process: • process and respond to test logs • process and provision of design
modification
E1, E2, E3, E6, E8
Knowledge of domain inspection and testing of signalling process
7.1. Generic competency requirements for check, review and approve The minimum generic competence requirements for the functions of check, review, verify,
validate and approve in the detailed design phase are provided in Table 17 through to Table 23.
These tables also indicate when the applicable RIM is required to seek further evidence of
domain and product competency requirements and minimum evidence requirements.
The signalling personnel shall have the ability to produce, check, review, verify, validate and
approve the following key deliverables:
• lineside circuits
• interlocking circuits
• interlocking data
• input into the assurance process in accordance with applicable configuration management
process
The information provided in Table 17 to Table 23 can also be used as a guide or template for
the AEOs to gather evidence of assessment to satisfy the AEO's CMS and their claim for
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
1.2 Applies first principles and the requirements and outcomes of signal arrangements, control tables and signal sighting during the check and review process
E1, E2, E3, E7, E9
Application of domain signal design principles and signalling practices Knowledge of signalling practices such as signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008)
1.3 Understand and apply signalling standards in detailed design process
E1, E2, E3, E5, E6, E8
Application of domain signalling documentation and drawings standards Knowledge of domain circuit design standards, standard CBI system architectures and data constructs such as Microlok 2
1.4 Manage and distribute the detailed design documentation through the project life cycle
E1, E2, E3, E4, E5
Application of domain signalling documentation and drawings standards
1.5 Verify and validate the veracity of documentation: • approve detailed design
documentation • check detailed design
documentation • verify and review of detailed
design documentation
E1, E2, E5, E6, E7
Application of domain signalling documentation and drawings standards
1.6 Understand the testing and commissioning process: • process and respond to test logs • process and provision of design
modification
E1, E2, E3, E4, E6, E8
Knowledge of domain inspection and testing of signalling process
1.7 Consider product requirements Interpret and apply manufacturer product requirements and functional interfaces
E1, E2, E3, E6
Knowledge of domain signalling systems For example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
1.8 Understand product operation in the rail environment and integrate with other products
E1, E2, E3, E6, E8
Knowledge of domain signalling systems For example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
Table 18 - Detailed design – check/review/approve – general technical skills and
experience generic competency requirements
Item reference
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
2.1 Checks, reviews and approves detailed designs using project documentation: • understand and apply control
tables • understand and apply signal
arrangements plan • extract implement SFS
requirements
E1, E2, E3, E5, E6, E8
Application of domain signal design principles and signalling practices Knowledge of domain circuit design standards, standard CBI system architectures and data constructs such as Microlok 2 Knowledge of producing domain SFS
2.2 Interpret and analyse project scope, relevant functional and interface specifications, other documents determining the impacts of the project interfaces
E1, E2, E3, E6, E7, E8
No specific domain or product requirements
2.3 Check, review and/or approve detailed signalling design and carried out three previous similar size designs without supervision
E1, E2, E3, E6, E7
No specific domain or product requirements
2.4 Check, review and approve design under supervision of a suitably competent mentor
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
3.1 Apply and interpret SRS in relation to railway operations
E1, E2, E5, E6, E8
Knowledge of producing domain SFS
3.2 Apply the first principles and the requirements and outcomes of signal arrangements, control tables and signal sighting during the check/review process and their effects on railway operations
E1, E2, E5, E6, E7
Application of domain signal design principles and signalling practices
3.3 Plan and program all design activities related to operating railway and occupation schedule requirements
E1, E2, E5, E7
Application of domain signalling documentation and drawings standards and domain signalling design process
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
3.4 Understand and apply the railway operating rules and regulations pertaining to the signalling infrastructure
E1, E2, E8 Knowledge of domain signalling practices, for example, signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008), Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
4.1 Able to communicate and discuss the signal design requirement at interdisciplinary review meetings
E1, E2, E3, E4, E5, E6
No specific domain or product requirements
4.2 Interact with other disciplines to coordinate design, particularly in relation to other disciplines, for example, track, overhead, civil structures and bridges
E3, E4, E5, E6
Knowledge of domain design management process.
4.3 Apply and interpret SRS in relation to testing and commissioning requirements
E3, E4, E5, E6, E7, E8
No specific domain or product requirements
4.4 Involved in the IDR process or meetings and applied outcomes
Evidence criteria Generic evidence (in Section 7.2)
Domain and product evidence
5.2 Understand the operator’s safety requirements Interpret and apply these requirements in relation to signalling system life cycle
E3, E4, E5, E6, E7, E8
Knowledge of domain signalling practices, for example, signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008), Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
5.3 Understand the safety requirements in relation to signalling infrastructure maintenance through the asset life cycle
E2, E5, E7, E8
Knowledge of domain requirements for signalling safeworking procedures
5.4 Understand, interpret, analyse and apply risk mitigation associated with the HARA process Identify hazards, threats and safety issues during the design life cycle
Reference Type of evidence Typical evidence required for concept design (deliverables)
Typical evidence required for detailed design (deliverables)
E1 Assessment of logbook and currency of entries, these will typically include work experience storyboards detailing particulars of work carried out, training records (academic or industry) and so on
Authenticated logbook entries: • signalling scheme plans • control tables • system requirements • SFS • equipment nomination
Authenticated logbook entries: • system requirements • SFS • signalling bonding plans • traction bonding • cable route and services
Reference Type of evidence Typical evidence required
for concept design (deliverables)
Typical evidence required for detailed design (deliverables)
E4 Manage client interface and communicate requirements relating to proposed signalling infrastructure detailed at the project concept stage
Provision of documented evidence together with authenticated logbook entries: • documented meeting
minutes • report and design
submissions for client approval and acceptance
• address client review comments
• provide client clarifications in relation to design decision using an agreed design log mechanism
Provision of documented evidence together with authenticated logbook entries: • documented meeting
minutes • signal sighting committee
evidence • report and design
submissions for client approval and acceptance
• address client review comments
• design log to capture issues during design development
• provide client clarifications in relation to design decision using an agreed design log mechanism
E5 Follow process and document decisions made during design development
Company management system - follow prescribed company process and produce requisite design documentation
Company management system - follow prescribed company process and produce requisite design documentation
E6 Demonstrates the relevant skills and knowledge to undertake design works unsupervised
Authenticated logbook entries - has carried out three previous projects similar in nature and has documented evidence
Authenticated logbook entries - has carried out three previous projects similar in nature and has documented evidence
E7 Demonstrates knowledge and experience working unsupervised in tasks and activities relative to assignment May perform more complex tasks unsupervised where previous experience can be demonstrated Has the relevant experience to execute the duties in a senior position as a leader and has the ability to solve problems Can interpret and apply relevant domain standards and principles Considered to be an SME and has the ability and experience to provide mentorship
Can provide documented evidence together with authenticated logbook entries: • maintenance of design
logs throughout the design, test and commission life cycle
• can demonstrate use of domain standards
• can demonstrate some level of innovative applications to provide successful outcomes
• can demonstrate longevity and good all-round knowledge base in signalling principles application
• endorsement of workplace evidence and verification
Can provide documented evidence together with authenticated logbook entries: • maintenance of design
logs throughout the design, test and commission life cycle
• can demonstrate use of domain standards
• can demonstrate some level of innovative applications to provide successful outcomes
• can demonstrate longevity and good all-round knowledge base in signalling principles application
• endorsement of workplace evidence and verification
Reference Type of evidence Typical evidence required
for concept design (deliverables)
Typical evidence required for detailed design (deliverables)
E8 Demonstrates knowledge and experience working unsupervised in tasks and activities relating to assignment May perform more complex tasks unsupervised where previous experience can be demonstrated Requires mentorship to perform more complex activities and tasks where experience cannot be demonstrated
Can provide documented evidence together with authenticated logbook entries: • maintenance of design
logs throughout the design, test and commission life cycle
• can demonstrate use of domain standards
• can demonstrate some level of innovative applications to provide successful outcomes
• can demonstrate a good all-round knowledge base in signalling principles application
Can provide documented evidence together with authenticated logbook entries: • maintenance of design
logs throughout the design, test and commission life cycle
• can demonstrate use of domain standards
• can demonstrate some level of innovative applications to provide successful outcomes
• can demonstrate a good all-round knowledge base in signalling principles application
E9 Demonstrate academic record to include relevant industry training or qualification, for example: • Intermediate Signalling
Technology (IST) Layouts
• Intermediate Signalling Technology (IST) Control Tables
• Advanced Signalling Technology (AST)
• Australian Quality Training Framework equivalent
Can provide documented evidence together with authenticated logbook entries: • academic achievements
by provision of certification
• relevant industry training by provision of certification
Can provide documented evidence together with authenticated logbook entries: • academic achievements
by provision of certification
• relevant industry training by provision of certification
8. Signalling commissioning generic competencies The signalling commissioning is the systematic process of ensuring that all equipment and
systems perform interactively according to the design intent and the operational and user
requirements.
The signalling personnel undertaking works on behalf of the AEO during the signalling
commissioning phase shall demonstrate sufficient competence and understanding of minimum
requirements detailed in T MU AM 04001 PL; however, the size and complexity of the work
being carried out should be considered.
Table 25 through to Table 30 describes the minimum generic competence requirements for the
signalling testing and commissioning phase. These tables also indicate when the applicable
RIM is required to seek further evidence of domain and product competency requirements and
Evidence criteria Generic evidence (in Section 8.1)
Domain and product evidence
1.6 Implementation and management of the test log and modification process during pre-testing and commissioning
ET8, ET9, ET10
Application of domain inspection and testing of signalling process
1.7 Consideration and interpretation of domain standard requirements Certify domain standards and requirements have been applied in the design and warrant the application during the testing and commissioning phase
ET7, ET9, ET10
Application of domain inspection and testing of signalling process
1.8 Consideration and interpretation of products requirements Implementation of product into service, incorporating all functional interfaces with other systems
ET7, ET9, ET10
Knowledge of domain signalling systems For example, signalling power supplies, traction return interfaces, lightning and surge protection requirements, compressed air systems and so on
Table 26 - Commissioning – general technical skills and experience generic competency requirements
Item reference
Evidence criteria Generic evidence (in Section 8.1)
Domain and product evidence
2.1 Creates and manages test log index including supporting evidence for test decisions
ET1, ET2, ET3, ET4, ET5, ET6, ET7, ET8, ET9, ET10
Application of domain inspection and testing of signalling Process
2.2 Interpret and analyse project scope, relevant functional and interface specifications, other documents determining the impacts of the project interfaces
ET1, ET2, ET3, ET4, ET5, ET6, ET7, ET8, ET9, ET10
No specific domain or product requirements
2.3 Demonstrated experience performing signal testing – as a guideline, six projects under mentorships or four projects as lead
ET1, ET2, ET3, ET4, ET5, ET6, ET7, ET8, ET9, ET10
No specific domain or product requirements
2.4 Worked at a senior level within the rail signalling environment, with an emphasis on inspection and testing of infrastructure
Evidence criteria Generic evidence (in Section 8.1)
Domain and product evidence
3.1 Apply and interpret SRS in relation to railway operations
ET1, ET2, ET3, ET4, ET5, ET6, ET7, ET8, ET9, ET10
Knowledge of producing domain SFS
3.2 Plan and program all testing activities relating to operating railway and occupation schedule requirements
ET1, ET2, ET3, ET4, ET6 ET8, ET9, ET10
Application of domain inspection and testing of signalling process
3.3 Understand and apply the railway operating rules and regulations pertaining to the signalling infrastructure
ET1, ET2, ET3, ET4, ET5, ET6, ET7, ET8, ET9, ET10
Knowledge of domain signalling practices, for example, signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008), Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
Evidence criteria Generic evidence (in Section 8.1)
Domain and product evidence
5.1 Apply signalling safeworking requirements for testing and commissioning phase Pre-commissioning briefings to disseminate signalling commissioning requirements during testing and commissioning phase
ET1, ET2, ET3, ET6, ET7, ET8, ET9
Application of domain requirements for signalling safeworking procedures
5.2 Validation of documentation: • collate and accept design
documentation • collate and accept installation or
construction documentation • collate and accept testing
documentation
ET1, ET2, ET3, ET6, ET7, ET8, ET9
Application of domain inspection and testing of signalling process
5.3 Understand the operator’s safety requirements Interpret and apply these requirements in relation to testing and commissioning of the signalling systems
ET10 Knowledge of domain signalling practices, for example, signalling practices and configuration standards (ESG 001 to ESG 005, ESG 007 and ESG 008), Network Rules and Network Procedures Domain requirements for signalling safeworking procedures
5.4 Understand the safety requirements in relation to signalling infrastructure maintenance through the asset life cycle
ET10 Knowledge of domain requirements for signalling safeworking procedures
Table 30 - Commissioning – commission systems into service generic competency requirements
Item reference
Evidence criteria Generic evidence (in Section 8.1)
Domain and product evidence
6.1 Apply and implement final designs into service in line with the domain specific requirements
ET7, ET9, ET10
Application of domain inspection and testing of signalling process
6.2 Sign-off system in accordance with operational rules
ET7, ET9, ET10
Application of domain inspection and testing of signalling process
Reference Type of evidence Typical evidence required (deliverables)
ET1 Assessment of logbook and currency of entries; these typically include work experience, storyboards detailing particulars of work carried out, training records (academic or industry) and so on
Authenticated logbook entries: • signalling scheme construction management • testing the application of system requirements • implementation of requirements in the SFS • equipment installation and set to work
ET2 Continue self-assessment and maintenance of work experience logbook
Authenticated logbook entries - detailing specific requirements for ET1
ET3 Competency assessment to be demonstrated through continued professional development
Authenticated logbook entries: • installation and set to work of equipment under
supervision • training in applicable industry requirements • keeping abreast of new equipment • continuous development in self instruction and
standards updates
ET4 Manage client interface and communicate requirements relating to proposed signalling infrastructure detailed in the signalling requirements specification, functional specification, and design and test documentation
Provision of documented evidence together with authenticated logbook entries: • pre-planning and submission of testing
documentation for approval and acceptance • testing certification management • provision and management of client interface log • demonstrate programming and planning of
possession and occupation scheduling in relation to client requirements and railway operations
ET5 Follow process and document strategy decisions made during testing and commissioning phase
Company management system - follow prescribed company process and produce requisite testing and planning documentation
ET6 Demonstrates the relevant skills and knowledge to undertake testing works unsupervised
Authenticated logbook entries - has carried out five projects previously, similar in nature and has documented evidence
Reference Type of evidence Typical evidence required (deliverables)
ET7 Demonstrates knowledge and experience working unsupervised in tasks and activities relating to assignment May perform more complex tasks unsupervised where previous experience can be demonstrated Requires mentorship to perform more complex activities and tasks where experience cannot be demonstrated
Can provide documented evidence together with authenticated logbook entries: • maintenance of test logs and design
modifications throughout testing and commissioning life cycle
• can demonstrate use of domain standards • can demonstrate some level of innovative
applications to provide successful outcomes • can provide or demonstrate a good all-round
knowledge base in the application of signalling principles testing
ET8 Demonstrate academic record to include relevant industry training, for example: • Intermediate Signalling
Provide documented evidence together with authenticated logbook entries: • demonstrate all academic achievements by
provision of certification • demonstrate all relevant industry training by
provision of certification
ET9 Certified qualifications Provide documented evidence - provision of certified copies of documentation relevant to activities and tasks being carried out
ET10 Demonstrates knowledge and experience working unsupervised in tasks and activities relative to assignment May perform more complex tasks unsupervised where previous experience can be demonstrated Has the relevant experience to execute the duties in a senior position as a leader and has the ability to solve problems Can interpret and apply relevant domain standards and principles Is considered to be an SME and has the ability and experience to provide mentorship
Provide documented evidence together with authenticated logbook entries: • maintenance of test logs and design
modifications throughout test and commission life cycle
• demonstrate use of domain standards • demonstrate some level of innovative applications
to provide successful outcomes • demonstrate longevity and good all-round
knowledge base in the application of signalling principles testing