CNC Glass Interlayer(China) www.cncglass.com [email protected][email protected]Comparing Adhesive Strength( Peeling Test) of CNC Glass Interlayer EVA Film: EVAFORCE EXTREME Adhesive Strength Test( Peeling Test) of A famous international supplier 1-Tester: Peter Lin 2-Test Time: May, 26, 2014. 3-EVA Film Samples: An famous international supplier 4-Speed: 300mm/min 5-Laminating Time and Temperature: 85°-15′130°-40′
4
Embed
Comparing adhesive strength( peeling test) of cnc glass interlayer eva film evaforce extreme
Comparing adhesive strength( peeling test) of cnc glass interlayer eva film evaforce extreme
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Average 299.420 59.884 222.252 44.451 203.724 40.745
*The EVA film is not totally separated from glass under test.
Test Result Conclusion:
Laminating Time and
Temp
85℃-15′
130℃-40′
85℃-15′
130℃-90′
85℃-15′
140℃-20′
85℃-15′
140℃-40′
EVAFORCE
EXTREME
48.36 53.18 16.82 40.58
Famous International
Supplier
39.32 17.80 9.60 43.65
The test result shows that EVAFORCE EXTREME of CNC Glass Interlayer is better in Adhesive Strength between EVA
Film and Glass surface than the famous international supplier.
EVAFORCE EXTREME EVA Interlayer Film lives up to the world-class level.
EVA FILMEVAFORCE® EXTREME*Super Clear*For Architectural Safety Laminated Glass*Less Overflow When Heating*Strengthened Mechanical Properties*Recommended For Extreme Environments, Curved Glass Laminating*Applied Both Indoor And Outdoor*Replacing PVB Film