U S U2 R PETRA FABRICATORS SDN BHD (425817-H) (a subsidiary of Petra Energy Berhad) An Emerging Malaysian Oil & Gas Development Company
U SU2 R
PETRA FABRICATORS SDN BHD (425817-H)
(a subsidiary of Petra Energy Berhad)
An Emerging Malaysian Oil & Gas Development Company
Petra Fabricators Sdn. Bhd. (PFSB)Incorporated in 1997 and commenced business operation in 1998. PFSB specializes in the design and fabrication ofprocess packages such as Pressure Vessels, Storage Tank, Skid Package, Scraper/Pig Launchers & Receivers, PipeSpools, Fired Heaters, Expansion Joints, Strainer and manufacture of heat transfer equipment such as Shell & TubeHeat Exchanger, Plate & Frame Heat Exchanger, Air Cooled Heat Exchanger, Double Pipe Type Heat Exchanger,Multitube Type Heat Exchanger and etc.
We are fully backed by our parent company Petra Energy Berhad which is listed on the Main Board of Bursa Malaysia.Our HQ is located at Menara OBYU, Bandar Damansara Perdana, Selangor, Malaysia. And PFSB is located atSeksyen 15, Shah Alam, Selangor; 40 minutes to Kuala Lumpur and Port Klang is our port of export which isapproximately 25km from PFSB.
PFSB land area covers of 13,656.7 sq meters which consist of office area (1,196.4 sq meters) and covered workshop(Bay 1 – 3,121.5 sq meters, Bay 2 – 1,785.6 sq meters and extension bay – 761.6 sq meters)
Today, PFSB’s Process Equipment unit has successfully caters to ASEAN market such as in Thailand, Brunei,Singapore, Vietnam, Indonesia, Myanmar, Philippines as well as international market in Saudi Arabia, Qatar, Kuwait,Abu Dhabi, United Kingdom, India, Bangladesh, Pakistan, Australia, New Zealand, Brazil, Nigeria, Angola, Sudan,Syria etc.
Petra Fabricators Sdn. Bhd. (PFSB)Incorporated in 1997 and commenced business operation in 1998. PFSB specializes in the design and fabrication ofprocess packages such as Pressure Vessels, Storage Tank, Skid Package, Scraper/Pig Launchers & Receivers, PipeSpools, Fired Heaters, Expansion Joints, Strainer and manufacture of heat transfer equipment such as Shell & TubeHeat Exchanger, Plate & Frame Heat Exchanger, Air Cooled Heat Exchanger, Double Pipe Type Heat Exchanger,Multitube Type Heat Exchanger and etc.
We are fully backed by our parent company Petra Energy Berhad which is listed on the Main Board of Bursa Malaysia.Our HQ is located at Menara OBYU, Bandar Damansara Perdana, Selangor, Malaysia. And PFSB is located atSeksyen 15, Shah Alam, Selangor; 40 minutes to Kuala Lumpur and Port Klang is our port of export which isapproximately 25km from PFSB.
PFSB land area covers of 13,656.7 sq meters which consist of office area (1,196.4 sq meters) and covered workshop(Bay 1 – 3,121.5 sq meters, Bay 2 – 1,785.6 sq meters and extension bay – 761.6 sq meters)
Today, PFSB’s Process Equipment unit has successfully caters to ASEAN market such as in Thailand, Brunei,Singapore, Vietnam, Indonesia, Myanmar, Philippines as well as international market in Saudi Arabia, Qatar, Kuwait,Abu Dhabi, United Kingdom, India, Bangladesh, Pakistan, Australia, New Zealand, Brazil, Nigeria, Angola, Sudan,Syria etc.
CORE VALUEProfessionalism | Integrity | Teamwork | Commitment
DEVELOPMENT& PRODUCTON
SEGMENT
SERVICESSEGMENT
MARINEASSETS
SEGMENT
PETRA ENERGYBHD
(718388-H)
PE ENERGYSERVICES SDN BHD
100%
100% 100% 100%
PE ENERGYCAPITAL SDN
BHD
100%
PETRA ENERGYDEVELOPMENT
SDN BHD
100%100%30%
100%
CORPORATE STRUCTURE
PETRAFABRICATORS
SDN BHD
PEINDUSTRIALRESOURCES
SDN BHD
100%
SUBSEA
PETRARESOURCES
SDN BHD
PERESOURCES
LTD
100%
PETRAMARINE
SDN BHD
PE SHIPMANAGEMENT
SDN BHD
100%
PECHALLENGER
LTD
PE MARINEONE LTD
PE MARINELTD
100%
100%
100%
PETRASERVICESSDN BHD
COASTALENERGYKBM SDN
BHD
PEDEVELOPMENT
LTD
100%30%
CONTRACTADMINISTRATOR
GENERALMANAGER
PETRA FABRICATORS SDN. BHD.ORGANIZATION CHART
RefPFSB/CHART/SA
/2015-0401
Date 13th March 2015
CONTRACTS,ESTIMATION &
PROPOSAL
ENGINEERING&
DESIGN
GROUP HUMANCAPITAL
PROJECTMANAGEMENT
CHIEFEXECUTIVE
OFFICER
PRODUCTION
PROCUREMENT
STORE /WAREHOUSE
QAQC HSE FINANCE
HUMANCAPITAL &
ADMIN
CONTRACTS,ESTIMATION &
PROPOSAL
ENGINEERING&
DESIGN
PROJECTMANAGEMENT
ICT
PFSB Human Resources
A Group of 85 Dedicated andProfessional Staffs
In-House Sub Contractors
PRESSURE VESSELS• All Types
• Separators, Scrubbers, Air Receiver
Drums, Slug Catchers, Condensate Pods
• Filters, Strainers, Coalescers, Absorbers
• Columns, Towers, Reactors, Deaerators
• Electrostatic Coalescers / Desalters ELECTROSTATIC TREATER
GLYCOL CONTACTOR
N-BUTANOL TOWER
SLUG CATHCER KO DRUM
OUR RANGE OF PRODUCTS AND SERVICES
HEAT EXCHANGERS
Shell & Tube Heat Exchangers
Including Thermal Design Sizing & Guarantee.
Air Cooled Heat Exchangers
Plate Heat Exchangers
Heat Exchangers Refurbishment
Replacement Tube Bundles
Re-tubing
Repair & modification works
Multi Tube Hairpin Heat Exchangers
Double Pipe Heat Exchangers
SHELL & TUBE HEAT EXCHANGERAIR COOLED HEAT EXCHANGER
PLATE HEAT EXCHANGER‘U’ TUBE BUNDLE EXCHANGER
DOUBLE PIPE HEAT EXCHANGER
SKID PACKAGES
• Fuel Gas / Seal Gas Skid
• Glycol Dehydration Skid
• Sea Water Treatment Skid
• Metering Skid
• Pump Skid
• Chemical Injection Skid
• Pressure Vessel Skid
STORAGE TANKS Shop fabricated
Roark’s & Young formula or API code
PIG LAUNCHERS & RECEIVERS ASME B31.8 code & API 5L material
PIPE SPOOLS CS, CrMo, SS, Duplex SS, CuNi etc.
FIRED HEATERS Gas heaters, hot oil heaters, re-boilers,
waste heat recovery units etc.
In collaboration with reputable principal
EXPANSION JOINTS In collaboration with reputable principal
First unit manufactured in Asia Pacific for oil
refinery FCCU cracker unit
SKID PACKAGE
TOTE TANK
FUEL GAS SKID
TEG GLYCOL SKID
FISCALCRUDE OILCUSTODYTRANSFER METERING SYSTEM
CORROSION INHABITOR TANK
OUR RANGE OF PRODUCTS AND SERVICES
STORAGE TANKS Shop fabricated
Roark’s & Young formula or API code
PIG LAUNCHERS & RECEIVERS ASME B31.8 code & API 5L material
PIPE SPOOLS CS, CrMo, SS, Duplex SS, CuNi etc.
FIRED HEATERS Gas heaters, hot oil heaters, re-boilers,
waste heat recovery units etc.
In collaboration with reputable principal
EXPANSION JOINTS In collaboration with reputable principal
First unit manufactured in Asia Pacific for oil
refinery FCCU cracker unit
PIG LAUNCHER & RECEIVER
FIRED HEATER
EXPANSION JOINT
Fabrication Materials• Carbon Steel / LTCS / NACE
Low Temperature Carbon Steel (LTCS)• Boiler Plates, ASME Pipes & Tubes, ANSI Fittings• HIC/SSCC tested CS(NACE sour service requirements)
• Corrosion Resistant Alloy (CRA) and exotic materials• SS316L, SS304L, SS310, SS321L
• Duplex Stainless Steel / Super Duplex SS
• Copper Nickel (CuNi)
• Chrome Moly (CrMo)
• Titanium
• Super Austenitic Stainless Steel (6Mo) & Alloy 20
• Inconel 625
• Incoloy 825
• Hastelloy C276
• SA533 & SA537 Quench and Tempered Material
• NORSOK Standard
THERMAL DEAERATOR
COLD HP SEPARATOR
ELECTRO SLAG STRIP CLADDING /WELD OVERLAYED OF THEDISH HEAD IN PROGRESS
EXPERIENCE & CAPABILITIES
• Corrosion Resistant Alloy (CRA) and exotic materials• SS316L, SS304L, SS310, SS321L
• Duplex Stainless Steel / Super Duplex SS
• Copper Nickel (CuNi)
• Chrome Moly (CrMo)
• Titanium
• Super Austenitic Stainless Steel (6Mo) & Alloy 20
• Inconel 625
• Incoloy 825
• Hastelloy C276
• SA533 & SA537 Quench and Tempered Material
• NORSOK Standard
• Thickest Walled Record• Year 2008
• Malaysia Refining Company/Foster Wheeler E&C
• Cold HP Separator
• (213mm SA516 Grade 70N + 4.5mm SS304L) Nominal Cladded
• (201mm SA516 Grade 70N + 3mm SS304L) Minimum
• Large Volume / Mass Manufacturing- 472 units (per order) Air Holders for JGC Japan’s Dolphin Project in Qatar
- 130 units (per order) Air Vessels for JGC Japan’s Rabigh Project in Saudi Arabia
- 76 units (per order) Air Vessels for JGC Japan’s Petronas LNG Train 9 Project
AIR VESSELS
• Cladded Materials- SS316L, SS304L,Incoloy 825 and Inconel 625
- Electroslag Strip Welding (in-house) and Weld Overlay of small
Bore nozzles (in-house)
- Explosion Bonding Clad / Hot Rolled Clad
EXPERIENCE & CAPABILITIES
International Standards and Design Codes
• ASME VIII DIV. 1
• ASME VIII DIV. 2
• PD5500 / PED / CE MARKING / IVB CERTIFICATION
• TEMA R/B
• API 650/620
• Roarks & Young
Software and Hardware
• HTRI Xist, PV Elite & Codecal, AutoCAD,
• ETank 2000, FINGLOW
• SOLIDWORKS 2010 3D CAD System
Software and Hardware
• HTRI Xist, PV Elite & Codecal, AutoCAD,
• ETank 2000, FINGLOW
• SOLIDWORKS 2010 3D CAD System
PETRONAS LICENSE
CERTIFICATION - CERTIFIED QUALITY SYSTEM
10
CERTIFICATION - CERTIFIED QUALITY SYSTEM
JPDC REGISTERED LETTER
APPRECIATION CERTIFICATES
APPRECIATION CERTIFICATES
PETRA FABRICATORS SDN BHD (425817-H)(a subsidiary of Petra Energy Berhad)
Lot 58, Jalan Utas 15/7, Kawasan Perusahaan Seksyen 15, 40000 Shah Alam, Selangor Darul Ehsan, Malaysia.
+603 55112000 | +603 55112266 | [email protected] | www.petraenergy.com.my
Google Map https://goo.gl/maps/TsiAa
Professionalism | Integrity | Teamwork | Commitment
PETRA FABRICATORS SDN BHD (425817-H)(a subsidiary of Petra Energy Berhad)
Lot 58, Jalan Utas 15/7, Kawasan Perusahaan Seksyen 15, 40000 Shah Alam, Selangor Darul Ehsan, Malaysia.
+603 55112000 | +603 55112266 | [email protected] | www.petraenergy.com.my
Google Map https://goo.gl/maps/TsiAa
Professionalism | Integrity | Teamwork | Commitment
THANK YOU