Page 1 of 19COMPANY PROFILE Advantage Marine Services(M) Sdn Bhd Unit 45,Jalan Sentral 2, Taman Nusa Sentral 79100, Nusa Jaya, Johor Bharu Email: [email protected]Contact: Victor Wong Tel: +6597893633 Email: [email protected]Contact: Derek Siow Tel: +60 19 723 0016 Reg Number: 1110016-U GST Number: 00549990400
19
Embed
COMPANY PROFILE - Home - Advantage Marine Servicesadvantagemarine.com.my/wordpress/.../2017/07/company-Profile-upda… · COMPANY PROFILE Advantage Marine ... To have all personnel
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 19
COMPANY PROFILE
Advantage Marine Services(M) Sdn Bhd Unit 45,Jalan Sentral 2, Taman Nusa Sentral
Advantage Marine Services (Malaysia) Sdn Bhd was established in March, 2014 to provide top notch/high quality in water services for marine/shipping and offshore. We are committed to provide services that are identified with best-in-class safety, quality and cost effectiveness. Our expertise encompassed a wide range of services that include full air/ mixed gas commercial diving, Special and Intermediate surveys on ships and rigs, Class IWS, real time CCTV inspections, U/W ship maintenance includes hull cleaning, propeller polishing/repairing, underwater repairs., This year, AMS has diversified into, steel fabrication, accommodation upgrading, industrial rope access, engineering control and instrumentation to support the client’s needs/operations.
Our Vision, Mission and Commitment Our Vision To be a leading world-class underwater inspection and steel fabrication specialist. Our Mission
To deliver safe, professional and efficient operations even for the most demanding jobs. To apply innovative and systematic approaches to ensure consistent delivery and
satisfaction to our clients. To continue searching for alternatives to enhance performance of customer operation. To adhere to Ethical and Offshore Standards in fulfilling assignments and requirements of
the undertaken job. To build long term relationships with clients and vendors
Our Commitment
To provide best-in-class diving equipment combined with OGP/IMCA standard, practices and procedures.
Electric Repairs (Air Conditioning, Motor Rewinding)
HVAC, Control Solution
Page 3 of 19
Page 4 of 19
STATEMENT OF POLICY Advantage Marine Services (Malaysia) Sdn Bhd Management shall consistently pursue a high degree of excellence to achieve customer satisfaction and even exceed their expectations by continuously improving and updating the employee’s skills and resources. We will establish and continually improve our management and performance of Quality, Occupational Health and Safety for all workers, suppliers, contractors, visitors and other stakeholders. It is AMS’s policy to act positively to prevent injury, ill health, damage, and loss arising from its operations, and to comply with all applicable legislation, regulation, statutory requirements and other safety and health measures required by law. AMS believes that all work related injuries, illnesses, and property losses are preventable with the commitment from management and good safety system in place. The most important factor in the undertaking of anyone’s job is the prevention of injury or ill health to any employees. We will minimize the hazard by managing the risk as low as in reasonably practicable Objectives AMS’s objectives in the fulfilment of this policy are:
To be an industry leader in Quality, Health, Safety and Environment(QHSE) To give N occupational health and safety considerations equal importance as quality,
morale, cost and production. To start work only with confirmation that essential safety systems are in place, and if safety
would be compromised, operations are to be suspended To only accept safe acts within the work of any AMS employee or other person working
on any worksite, facility, vessel or rig. To provide appropriate levels of health care and rehabilitation for all EMPLOYEES. To promote an excellent Quality, Health and Safety, and Environment culture within the
organization by means of information sharing, by including personnel in decision making and by delegating specific Quality Health and Safety Management functions
To have all personnel recognize their responsibility to identify and eliminate hazards, control
risk, and prevent injury to themselves and others. To ensure Third Party Personnel clearly understand and adhere to AMS’s quality,
occupational health and safety policy and standards, and where necessary, assist in achieving them
To provide leadership and training for all employees in following safe operating procedures and in developing safe work attitudes
QUALITY, OCCUPATIONAL HEALTH AND SAFETY POLICY
Page 5 of 19
Mr ANDREW TEOW DIRECTOR
Mr Andrew Teow joint AMS in April 2016. He graduated with Bachelor Degree (Honours) and Master Degree in Petroleum Engineering from University of Technology Malaysia, Johor Bharu, Malaysia.
He has over 15 years of experiences in oil and gas encompassing the drilling operation, solids control and waste management, sales and marketing and business development. He was formerly with drilling company for 11 years with the last designation as Drilling Superintendent to look after an ultra-deep water drilling rig with excellent safety record/achievements. In addition, he has had work experiences across the SEA region where he got involved in managing various sizeable projects with up to USD50 million. With his leadership, experiences and networking; AMS has diversified and ventured into steel fabrication, accommodation upgrading, engineering control and solution to support clients’ needs and operations. MR. VICTOR WONG GENERAL MANAGER
Mr. Victor Wong was the former Managing Director of Unidive Marine Services (Malaysia) Sdn. Bhd. He was responsible for the operations across Unidive Malaysia. He also oversees the formulation and implementation of operational plans and policiesHe successfully spearheaded various tender qualification and audits including ExxonMobil, Shell and has contributed significantly to the development and growth of Mencast Subsea.
His duties included monitoring the daily operations of diving company from a staff of 4 personup to staff in excess of 100 permanent personnel. Assisting the Directors in strategic planning for future growth and opportunities. He was involved in developing new business areas and setting up Malaysian operations which became the leading company in Johor.
MANAGEMENT TEAM
Page 6 of 19
Director Andrew Teow
General Manager Victor Wong
QA / QC
QA / QC Manager
QA / QC Engineer
HSE
HSE Manager
Storekeeper
Sales & Marketing
Sales & Marketing Manager
Sales Engineer
Rope Access
Rope Access Coordinator
Rope Access
Project / Engineering
Project Manager
Project Engineer
Diving Operation
Diving Supervisor
Lead Diver
Air Diver
DMT/NDT Diver
Water Blaster Technician
FREELANCE
AMS Organization Chart
Page 7 of 19
Containerised Deck Decompression Chamber
60 inch diameter double lock decompression chamber Medical lock c/w safety interlock systems LP and HP air supplies for DDC control panel Outfit of the chamber: - All air inlet lines are at the outside with ball valves. - Ball valves are fitted at the inside. - The air outlet lines are fitted with ball valves at the
in- and outside. - Air inlet and outlet lines at the inside of the
chamber are complete with silencers. - The oxygen in- and outlet lines are on the inside as
well as on the outside complete with valves, same as for the air system.
- 1 pcs. Oxygen distribution panel, for 4 divers with overboard dump, placed in the main lock with all necessary quick connectors and valves.
- 1 pcs. oxygen distribution panel for 2 divers is placed in the entrance lock, further fitted as above panel
- Complete internal LED lighting system in the entrance lock and the main chamber.
- Amcom chamber communication for both compartments
-Stainless steel medical lock is fitted with a special stainless steel safety lock so that it cannot be opened under pressure.
- Aluminium floor in entrance lock and mainlock. -Diving primary medical kit (DMAC 015)
Containerised Dive Station Control Van
10ft Container Fully lined and insulated - 3 man air diving panel, video and communication
systems - Internal bulkhead and personnel door, storage for
diving equipment - Industrial lighting and power installation with 4 hr
back up supply - Non-slip flooring, ventilation grilles - Industrial lighting and power - Penetrator plates for gas/electrics - Supervisor’s desk and archive, reverse-cycle air
conditioning
AIR DIVING SYSTEM
Page 8 of 19
Launch and Recovery System
LARS recovery unit - Primary recovery/launch system hydraulically
assisted - Secondary recovery hydraulically assisted with a
clump weight system man riding winch connected to a 2 man stage c/w emergency air breathing gas.
The twin basket launch and recovery system is specifically designed to provide a compact option for the use of two separate LARS. This system is very easily transportable because it fits exactly in a 20" container. We realise the necessity to use the least amount of deck space on board a vessel and ensure that shipping & mobilisation costs are kept to a minimum. The configuration offered in this specification is viewed as being the most practical solution for a mobile launch & recovery system that complies with IMCA's diving standards and your specification requirements.The twin basket launch and recovery system is specifically designed to provide a compact option for the use of two seperate LARS. This system is very easily transportable because it fits exactly in a 20" container. We realise the necessity to use the least amount of deck space onboard a vessel and ensure that shipping & mobilisation costs are kept to a minimum. The configuration offered in this specification is viewed as being the most practical solution for a mobile launch & recovery system that complies with IMCA's diving standards and your specification requirements. CCTV System_Outland Tech CCTV System UWS3210 consisting of:- - UWC325/ss/e fixed focus camera - UWL401 LED light - DHM-60 hand held bracket with handle - CON-3200 console with monitor and HD recorder
Page 9 of 19
Diving Equipment
- 3 x Divers Fibrolight umbilicals, 200m each, with air, pneumo comms and video
- 1 x KMB18 - 2 x KMB37 - 3 x Bailout sets with backpacks
Air Banks for Backup
Conform IMCA regulations - 4 Cylinderx50litre@ 200 Bar Air Quads, separated
by a manifold in 2x2 cylinders - Every cylinders have its own valve - Galvanized steel rack with protection plate on top
to protect the valves (norm IMCA) - 1xentry and 2x exit with a valve on each - 2xcontrol manometer
Coltri Sub Diesel HP Compressor
Model: MCH16/D-TS - 3 stage working principle - 1300 rpm maximum speed - Belt driven - Air Cooled - Interstage cooling coil - Interstage individual safety relief valve - 9cfm or 260 litres/minute free air delivery - Working pressure up to 330 bar - Condensate manual drain valve - 2 filling outlet - Scuba or DIN filling device - Prime Mover - Yanmar L90 diesel engine - 9HP air cooled - Recoil rope start
Ingersoll Rand L.P. Compressor
- 16 bar delivery - Breathing air filtration package - 440 V / 3 ph, 12 cfm - 300 L receiver with relief valve and gauge
Page 10 of 19
Hull Cleaning Equipment
- Hydraulic Power pack - 350 ltrs Hydraulic Oil - 105 HP Diesel Driven Engine
- Brushcart x 5 units - Hydraulic Hose Reel x 150 mtrs
Page 11 of 19
Non Destructive Test (NDT) Equipment Multi gauge Underwater Gauge (Ultrasonic Thickness Gauge)
Robust ultrasonic thickness gauge designed for most common underwater thickness gauging application. The gauge is pressure tested to 500m and has the option to transfer measurements to a surface display unit with the simple addition of a replacement end cap. It has been designed and built to survive extremely harsh conditions that exist in the offshore and underwater industries worldwide. The gauge uses multiple echo which means measurements can be easily taken without the need to remove coatings and the large bright LED display ensures the display can be seen by the diver, even in poor visibility.
BUCKLEY’s Bathycorrometer
A tool for measuring the levels of corrosion on sub-sea structures. Light and easy touse, this hand-held unit enables divers to obtain accurate readings of the corrosion potential levels of structures at the point of contact. Use for polarisation, corrosion and interaction surveys, in particular as part of commissionioning check or inspection of: production and drilling platforms; sub-sea pipelines, ships’ hulls; jetties and other marine works.
HCL MPI Unit Electromagnetic Yoke
The lightweight, encapsulated, Magnetic Yoke is used for the detection of surface cracking in any ferro-magnetic material. The Y6 electromagnetic yoke rents with power cable, case, operating sheet and yoke. All contained in a strong, attractive carrying case.
Underwater Brocco Cutting and Welding set
- U/water Brocco cutting gun x 2 no. - U/water Brocco welding stinger x 2no. - 200m cable x 1. - Pirana make knife Switch within Dive Supervisor’s
reach enclosed in a weather proof casing. - U/Water Brocco rods x 2 box. - U/water welding rods x 2 box.
PROJECT EQUIOMENT (OPTIONAL)
Page 12 of 19
Hydraulic Power Pack for Hydraulic Tools-Electric Drive
- 1 x Electric Motor - 20 HP X 1440 RPM;415V;3-PH;50Hz.
- 1 x Oil Tank - 150 LITRES - 1 x Pump - 34.2 LPM; Working Pressure – 3000PSI With pressure regulator, strainer, breather, level gauge, relief valve, isolator, gly filled pressure gauge, etc
Hydraulic Tools
1 x Stanley Model IW16 Underwater Impact Wrench - Input Flow Range: 7 - 12 GPM (26 - 45 LPM) - Input Pressure: 1500 - 2000 PSI (105 - 140 bar) - Capacity: 1 in. Square Drive - Torque Range: 500 - 2500 ft-lb (680 - 3400 Nm) - Weight: 26 lbs (12 kg) - Dimensions: 14.5 in. L x 4.5 in. W (37cm L x 11cm W) - Connect Size and Type: 3/8 in. Adaptor to -8 SAE Port
Stanley GR 29 Underwater Grinder - Capacity: 9 in. wheel on 5/8 in. -11 arbor - Rpm: 2700 @ 10 gpm (2700 @ 38 gpm) - Weight (with guard): 14 lbs. (6.4 kg) - Length: 11 in. (28 cm) - Width (with guard): 12 in. (30.5 cm) - Pressure: 1000 - 2500 psi (70-176 bar) - Flow range: 4-10 gpm (15-38 lpm) at the commercial