Compact Track Loader Attachments Versatility for Your CTL and Skid Steer ! Bull Hog ® Mulchers • Tree Shears • Stump Hogs • Grapples
Compact TrackLoader Attachments
Versatility for Your CTL and Skid Steer !
Bull Hog® Mulchers • Tree Shears • Stump Hogs • Grapples
GS-30F-0019S
fecon.com [email protected] +1 513 696 4430
800 528 3113
• Operator’s cab must be protected with both properly maintained 1/2” LEXAN® Glass (or equal) and Falling Object Protection. • Always ensure that your carrier manufacturers safety features (including Falling Object Protection, and Roll-Over Protection) meet your job safety requirements. • Certain guarding and features may have been removed for illustrative purposes, always run with proper guarding. • Weights may vary based on options. • Safety Is The Responsibility Of The Operator. • Specifications subject to change without notice. • Photographs may have been altered for marketing purposes. 1/17
Bull Hog® Required Hydraulic Flow Number Of Tools Working Width /
Overall Width Weight
BH62SS 24 - 45 gpm 24 50” / 63” 2050 lbs
BH74SS 24 - 45 gpm 30 61” / 74” 2425 lbs
BH85SS 24 - 45 gpm 36 72” / 85” 2580 lbs
Tree Shear Cutting Capacity Accumulating Capacity Approximate Cycle Time WeightFBS1200 - Dual Knife 12” Diameter 128 sq. in. 10 Sec. w/ 20 gpm 1250 lbs
FBS1400 - Single Knife 14” Diameter 350 sq. in. 8 Sec. w/20 gpm 1800 lbs
FBS1500 - Dual Knife 15” Diameter 350 sq. in. 10 Sec. w/20 gpm 1900 lbs
Rotating Grapple Opening Area Clamped Opening Maximum Load WeightFFG60 60” 2” 9900 lbs 800 lbs
Grapple Rake Length Depth Clamp Height (Open) WeightFRG72 72” 41” 37” 863 lbs
Grapple Bucket Length Depth Opening WeightFBG72 72” 32” 37” 815 lbs
Stump Hog® Flow Work Zone Wheel Diameter / Thickness Weight
SH27060 30-50 @ 3500 psi 48” W x 30” D 25” / 4” 1700 lbs
Stumpex Flow (GPM) Speed (RPM) Depth/Min - 3/4” Bit Depth/Min - 1” BitSHX30SS (30” dia) 20-42 7.3-16.1 5.5”-12.1” 7.3”-16”
BULL HOG® MULCHERS• Tool design that boosts cutting force by limiting the number of tools contacting the material at any time. • Counter comb design to size material faster.• Perfect for Site Prep, R.O.W.& Park Trails. TREE SHEARS • Shear trees up to 15” in diameter.• Shear, Lift, Bunch and Carry Multiple Trees • Conversion kit available for excavator application.STUMPEX • Mounts on skid steers 20-42 GPM • Bores 20” in ground• No High Speed Flying Debris for Safer Work Zone
GRAPPLE RAKE / GRAPPLE BUCKET • Dual independent arms for awkward shaped material. • Ideal for clearing, brush, debris, logs and rock removal. • Rigid frame construction for difficult applications.STUMP HOG • 60” Wide Swing • Grind stumps and root balls up to 24” deep. ROTATING GRAPPLE• Available in 48”, 60” and 72” openings • 360 degree rotation • Ideal for moving fallen trees, rocks and brush piles quickly with plug-n-go installation.
FRSFecon Rotating Shear
Excavator Shear
• 360° Rotation - Great for Stacking Material or Feeding Chippers Safely
• Tough and Durable, Made with Hardox
• Accumulator Arm for Bunching Smaller Material
GS-30F-0019S
fecon.com [email protected]
+1 513 696 4430800.528.3113
• Operators cab must be protected with both properly maintained 1/2” LEXAN® Glass (or equal) and Falling Object Protection. • Always insure that your carrier manufacturers safety features (including Falling Object Protection, and enclosed Roll-Over Protection meet your job safety requirements. • Certain guarding and features may have been removed for illustrative purposes, always run with proper guarding. • Weights are subject to vary based on options. • Safety Is The Responsibility Of The Operator. • Specifications subject to change without notice. • Pictures may contain optional accessories. • Photographs may have been altered for marketing purposes. 5/17
FRS15FRS10
The Fecon Rotating Shear (FRS) offers excavator operators the advantage of 360° rotation of their tree shear. Allowing more reach and access to trees with less repositioning of your machine. Whether you are thinning trees, felling or doing road side clean up; the
FRS will get the job done faster! With models ranging from 5-35 tons and cuts up to 20” diameter; there’s an FRS for your job. You can equip the FRS with an accumulator arm for when you are shearing smaller material allowing you to bunch and keep
shearing. FRS is made with tough “Hardox in My Body” and has a single blade design for cutting.
EXC SIZEWEIGHT OF
SHEARLBS / KG
WEIGHT OF ACCUMULATOR
LBS / KG
BLADE OPENING
IN / MM
GRAPPLE OPENING
IN / MM
HEIGHT OF SHEAR IN / MM
CUTTING CAPACITY DIAMETER
IN / MM
MAX PSISHEAR
MIN/MAX GPM
ROTATION MAX GPM
FRS02* 4.5-7T 750 / 341 N/A 35 / 889 35 / 889 23 / 584 6 / 152 3200 13 / 16 N/AFRS04** 5.5-9T 950 / 431 N/A 35 / 889 35 / 889 24 / 609 6 / 152 3200 13 / 16 5FRS05 8-14T 1200 / 545 132 / 60 18 / 457 33.5 / 850 47 / 1194 10 / 254 3650 16 / 21 5FRS10 12-18T 2160 / 980 240 / 109 25 / 635 43 / 1092 56 / 1422 14 / 355 4350 21 / 26 5FRS15 16-24 T 3420 / 1551 240 / 109 29.5 / 749 43 / 1092 68 / 1727 18 / 457 4350 34 / 40 11FRS20 21-35T 4050 / 1837 495 / 225 33.5 / 850 59 / 1498 73 / 1854 20 / 508 4350 40 / 48 11
*Model not available with rotation or accumulator **Model not available with accumulator • Weights do not include mounts • Blade made with Hardox 400