0 50 100 150 200 250 HS-Mikro Pak 4V 95 HS-Mikro Pak 4V 85 HS-Mikro Pak 4V 65 100% 70% nergieverbrauch 20 25 Frame corrosion resistant plastic Operational conditions ▪ max. rel. h. 100 [%] ▪ max. temp. 65 [°C], short term peak up to max. 80 [°C] ▪ optional up to max. 120 [°C] Spacers thermoplastic (minipleat) Filtermedia ▪ high quality glass fibre paper (water resistant), pressure drop may temporarily increase at high humidity levels ▪ Optional: fully synthetic filtermedia for maximum rigidity, higher mechanical stress tolerance Combustible YES Options 1.) burst protector / protection screen 2.) foamed gasket on the clean air side of the flange 3.) +14% more filtersurface 4.) temperature resistance up to 120°C Example applications ▪ main filter for gas turbines ▪ pre- and mainfiltration for particle and finedust removal ▪ main flter for comfort air filtration Initial pressure drop [Pa] Nominal air flow [m 3 /h] HS-Mikro Pak 4V compact filters serve as pre-filter and main filter when high flow rates and high initial efficiency are required. These filters offer more filter surface than the classic HS-Mikro Pak and can therefore achieve a higher dust storage capacity and thus longer service life. Thanks to the aerodynamically shaped inlet profiles, these filters offer significantly lower ini- tial pressures than comparable filters from other manufacturers. The robust plastic frame is corrosion-free and allows easy disposal - the filter is completely incinerable. For applications with the highest demands, the filter can be reinforced on the clean air side with burst protection grids. HS-Mikro Pak 4V Detail: flange dimension (without gasket) Displays also options 1 & 2. Compact Filter – documents might be subject to change / issue Sept. 2021 Typ: HS-Mikro Pak 4V Energy class acc. to 65 85 95 Eurovent 4/21 Class EN 779 M6 F7 F9 Class ISO 16890 ePM10 85% ePM1 65% ePM1 90% Initial-∆P [Pa] (A / B) 65 / 120 75 / 140 85 / 165 Recc. final ∆P 600 Max. temp. [°C] 65° (optional 120°) Dimensions [mm] Nominal air flow [m 3 /h] Weight Width Height Depth A: standard B: high flow rate [kg] 592 592 292 3400 5 000 7 kg 490 592 292 2800 4 100 5 kg 287 592 292 1700 2 500 3 kg Please ask for other desired designs. HS-Luftfilterbau GmbH Bunsenstraße 31 D-24145 Kiel Germany Tel.: +49 (0) 431 71953 0 Fax: +49 (0) 431 71953 30 www.luftfilterbau.de info@luftfilterbau.de Dok.-ID: 06/D13 Seite 1/1 Page Doc.-ID: