Forces (HFC) COMBINED SHEAR FORCE & BENDING MOMENT HFC31 Year 1 study Features TWO experiments in ONE Bending and Shear in one Apparatus. Visually realistic, 'cut' beam. Unrestricted loading positons. Load position at 'cut' in beam. Experiment can be undertaken from both sides. Quickly and easily setup. Dedicated e-book supplied Description This compact bench top unit allows the observation and analysis of both Shear Force and Bending Moment within one unit. A rigid, aluminium beam is cut into two unequal lengths, creating a ‘cut’ section. Each beam is then simply supported on vertical supports. Each support can be moved along the beam section length creating varied support positions. At the ‘cut’ section, a deep groove ball bearing in one beam runs within a block in the other beam. This allows for both vertical movement (shear) and rotation (bending) to occur. The Shear Force is measured using a vertical analogue spring balance. A second analogue spring balance measures the direct load created in the beam ‘cut’ section and it’s associated mechanical moment lever arm set across the ‘cut’ section allows the bending moment to be calculated. Special Load hangers are provided that fit over the beams. The Load hangers can be positioned accurately along the beams length by using the graduated scales attached to the side of the beams. [email protected]01794 388 382 P A Hilton Ltd, Horsebridge Mill, Kings Somborne, Stockbridge, Hampshire. SO20 6PX www.p-a-hilton.co.uk | 1
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Forces (HFC)
COMBINED SHEAR FORCE & BENDING MOMENTHFC31
Year 1study
Features
TWO experiments in ONE
Bending and Shear in one Apparatus.
Visually realistic, 'cut' beam.
Unrestricted loading positons.
Load position at 'cut' in beam.
Experiment can be undertaken from both sides.
Quickly and easily setup.
Dedicated e-book supplied
DescriptionThis compact bench top unit allows the observation andanalysis of both Shear Force and Bending Moment withinone unit.
A rigid, aluminium beam is cut into two unequal lengths,creating a ‘cut’ section. Each beam is then simply
supported on vertical supports. Each support can bemoved along the beam section length creating variedsupport positions. At the ‘cut’ section, a deep grooveball bearing in one beam runs within a block in the otherbeam. This allows for both vertical movement (shear) androtation (bending) to occur.
The Shear Force is measured using a vertical analoguespring balance. A second analogue spring balancemeasures the direct load created in the beam ‘cut’section and it’s associated mechanical moment leverarm set across the ‘cut’ section allows the bendingmoment to be calculated.
Special Load hangers are provided that fit over thebeams. The Load hangers can be positioned accuratelyalong the beams length by using the graduated scalesattached to the side of the beams.
The smooth design of the beam sections allows a widevariety of unrestricted load positions to be used along thebeam lengths, using the weights set provided.
Related laws
Shear Force.
Bending Moment.
Strain.
Stress.
Young's' Modulus.
Shear Force Diagrams (SFD).
Bending Moment Diagrams (BMD).
Verification of Equilibrium of Vertical Forces andMoments.
Learning capabilities
Visual demonstration of the Shear Force and BendingMoment at a 'cut' section in a beam
Comparison of experimental results with theoreticalvalues and bending moment diagrams
Variation in bending moment for variations in load,load position and load arrangement
Technical Specification
Beam lengths:650 and 350mm
Beam cross section: 51 x 38mm
50mm graduations on beams
Weights set: 3 x 2N, 3 x 5N, 3 x 10N
3 x Load hanger
Spring Balance: 0…6kgf range, 0.1kgf resolution
What’s in the Box?
1 x Short Beam
1 x Long Beam
2 x Support Rods
3 x Hangers
3 x 2N, 3 x 5N, 3 x 10N weight
1 x Influence line section
2 x Spring balance
1 x Tape measure
Instruction manual
Packing list
Test sheet
You might also like
HST9
HST10
HST46
Weights & Dimensions
Weight: 10 kg
Length: 1000mm
Width: 300mm
Height: 400mm
Essential Services
Sturdy Bench Top
Ordering informationTo order this product, please call PA Hilton quoting thefollowing code:HFC31
Powered by TCPDF (www.tcpdf.org)
All brand and/or product names are trademarks of their respective owners. Specifications and external appearance are subject
to change without notice. The colour of the actual product may vary from the colour shown in the brochure.