202 CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633 K5116 K412051 (25/box) Single point section, Kondex no. 432-051 extra heavy, chrome, top serrated section. Fits 300, 500, 700, 800 series heads with bolt on sections. 2” hole spacing. 2-7/8” long x 3” wide. Big Tooth. 9318 $1.99 BDC6700B (25/box) Double point section. Replaces Agco no. 71353125. Fits all heads with Clean Cut system. Big Tooth. 3317 $1.90 KDC55 Section bolts and nuts, for use with single point or double point sections, 5/8” long, box of 50. 8465 $9.26 KDC55114 Section bolts and nuts, for use with single point or double point sections, 1-1/4” long, box of 25. 4253 $7.50 Order No. Description Stock Retail BU325 Double prong guard, Replaces AC no. 71341601, 71386962, and 7116504. Fits all Agco 300, 500, 700, 800, 7000, 7200, 8000, 9250 series flex heads and Challenger. 1689 $12.30 K5116 Hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles. 4639 $5.20 BDC5150H High arch hold down clip for use at the drive head area. Fits all flex heads and early rigid heads. 4055 $7.20 SDC468 Steel wear plate, replaces AC no. 711766537. Fits all Gleaner heads. 3318 $1.90 BDC5066 Four prong bottom guard. Fits all Gleaner flex heads with Clean Cut system & Challenger 5496 $13.50 BDC5166 Two prong top guard. Fits all Gleaner flex heads with Clean Cut system. Replaces AC no. 71345591. Also fits Challenger. 3095 $12.90 K901118 Drive head, series 3 (late) and 500 ser. 02382 $104.00 Order No. Description Stock Retail Order No. Description Stock Retail Sickle Bar Drive Head Guards, Hold Down Clips, Wear Plates Sections and Section Bolts Combine Sickle Repairs (OEM Style) - Agco Series 2-8 & Challenger Sickles - Split, without drive head - Can ship UPS CR28785 Split sickle, 20’ with big tooth sections. 008648 $585.00 CR24074 Split sickle, 25’ with big tooth sections. 008059 $635.00 CR28789 Split sickle, 30’ with big tooth sections. 006358 $670.00 Order No. Description Stock Retail To fit Agco OEM guards with 3” cutting systems. Series 2 thru 8 headers. Also Massey 9850 flex.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
202CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633
K5116
K412051(25/box)
Single point section, Kondex no. 432-051 extra heavy, chrome, top serrated section. Fits 300, 500, 700, 800 series heads with bolt on sections. 2” hole spacing. 2-7/8” long x 3” wide. Big Tooth.
9318 $1.99
BDC6700B(25/box)
Double point section. Replaces Agco no. 71353125. Fits all heads with Clean Cut system. Big Tooth.
3317 $1.90
KDC55 Section bolts and nuts, for use with single point or double point sections, 5/8” long, box of 50.
8465 $9.26
KDC55114 Section bolts and nuts, for use with single point or double point sections, 1-1/4” long, box of 25.
4253 $7.50
Order No. Description Stock Retail
BU325 Double prong guard, Replaces AC no. 71341601, 71386962, and 7116504. Fits all Agco 300, 500, 700, 800, 7000, 7200, 8000, 9250 series flex heads and Challenger.
1689 $12.30
K5116 Hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles.
4639 $5.20
BDC5150H High arch hold down clip for use at the drive head area. Fits all flex heads and early rigid heads.
4055 $7.20
SDC468 Steel wear plate, replaces AC no. 711766537. Fits all Gleaner heads.
3318 $1.90
BDC5066 Four prong bottom guard. Fits all Gleaner flex heads with Clean Cut system & Challenger
5496 $13.50
BDC5166 Two prong top guard. Fits all Gleaner flex heads with Clean Cut system. Replaces AC no. 71345591. Also fits Challenger.
3095 $12.90
K901118 Drive head, series 3 (late) and 500 ser. 02382 $104.00
Order No. Description Stock Retail
Order No. Description Stock RetailSickle Bar Drive Head
Sickles - Split, without drive head - Can ship UPS
K8030D 30’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80344) and LH (80342) Sickle Assemblies.
005945 $660.00
K8035D 35’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80348) and LH (80346) Sickle Assemblies.
057759 $770.00
K8040D 40’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80354) and LH (80352) Sickle Assemblies.
000667 $880.00
80000 Connector kit for Agco DynaFlex sickles. 88919 $26.50
Order No. Description Stock Retail
Double Drive Parts for Overlap
SC16519 Open top guard for center overlap on Agco DynaFlex. 52621 $35.00
SC16223 Section, Countersunk, coarse tooth for overlap on double drive heads. 4126 $2.85
SC10045 Countersunk bolt for overlap sections. 629 $0.35
SC13961 Flange nut, 6 mm for section bolts. 410 $0.20
SC13666 Overlap Strap, 2 section. 04819 $23.00
SC13665 Overlap Strap, 3 section. 04818 $23.00
Order No. Description Stock Retail
204CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633
K231271(25/box)
Single point section, black, “Big Tooth”, top serrated, extra heavy. Replaces Case-IH no. 596321R3 & 826720C2. Used on 820, 1010, 1020, 2010, 2020. 3” wide x 3-1/4” long, 3 holes.
5019 $1.50
B00-090 New Heavy Serration Section. Used on 820, 1010, 1020, 2010, 2020. Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA.
8908 $1.40
S203549 Black, single point section (7 tpi), used on Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF.
3218 $1.75
B00-087 New Heavy Serration Section. Used on CIH 3020. Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA.
8907 $1.40
KDC55 Section bolts and nuts, for use with single point sections, #12 x 5/8” long, box of 50.
8465 $9.26
KDC5501 Section bolts and nuts, 1” long box of 25. 8744 $6.83
K920832 18mm long section bolt and locknut, box of 50 ea. Use with single tooth sickle sections (S203549) on Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF platforms
04518 $22.00
Order No. Description Stock RetailSections and Section Bolts
Combine Sickle Repairs (OEM Style) - Case-IH
Guards
Order No. Description Stock RetailBU270 Double prong guard, fits all 820 flex heads that use guards equiped
with cross bar. Replaces IH no. 613838R3 and 187350A1.5499 $13.50
BU299 Double prong guard, fits all Case-IH 1020; 2020 s/n CBJ020001 and above. Replaces Case-IH numbers 1307299C2 and 334305A1.
4095 $12.91
BU210 Double prong guard used at drive head area (3 pcs.) on model 1020 with cross bar. Replaces Case-IH numbers 1326787C3, 483500R4, and 187346A1.
3794 $13.90
BU329 Double prong guard used at drive head area on models 820, 1010, 1020 platforms, 3 used. 2010, 2020 PIN CBJ020001 & up platforms, 4 used. New Holland models 72C, 74C PIN PNL017001 & up platforms (drive head guard, 2 used). ** Double Heat treated guard ** Replaces CNH 1326787C3; 87442329
34018 $14.90
BU289 Single prong end stub guard. 2 used on Case-IH 1020 15, 20, 25, 30 ft. platforms.. Replaces CIH no. 1338269C1.
3748 $6.75
BU215 Double prong guard. Fits Case-IH platforms 2010 and 2020 prior to s/n CBJ020000 or with s/n’s that start with HAJ. Replaces CIH part no. 700707147, 86615982. ** Double Heat treated guard **
0898 $14.00
BU358 Double prong guard with cross bar. Use at drive head on Case-IH 2010 and 2020 prior to s/n CBJ090000; also s/n’s that start with HAJ. 4 used.
33015 $14.75
BU472717DH Single Prong Guard to fit Case-IH 820 platforms, double heat treat. Replaces CIH no. 472717R2.
7678 $10.95
BU432 Triple prong guard without cross bar. Fits 2010, 2020 PIN CBJ020001 & up double drive platforms (center guard, 1 used).
74472 $34.95
Models 820, 1020, 2020
205Fax 800-528-2554 www.cfcdist.com
Hold Down Clips, Wear Plates
K5116 Hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles.
4639 $5.20
BDC5150H High arch hold down clip for use at the drive head area. Fits all flex heads and early rigid heads.
4055 $7.20
K118499 Holddown clip for Draper heads. Replaces CIH no. 338591A1; 87407812.
5548 $6.50
SDC468 Steel wear plate for models 810, 820, 1010, 1020 (with 3” single point sections).
3318 $1.90
Order No. Description Stock Retail
Guards
Order No. Description Stock RetailBU973 Double prong guard for model 3020, NH740C. Replaces CNH no.
K412021 Single point section, top serrated, chrome, heavy small tooth. Replaces JD no. H130478 “Dura Cut”.3” wide, 3 9/32 long. 2 holes on 2 1/16” spacing.Bolt-on or rivet-on. (25/box)
3318 $1.90
K432321 Single point section, top serrated, chrome, “Big Tooth”. Replaces JD no. H136807 “Dura Lite”. 3” wide, 3 9/32” long. 2 holes on 2 1/16” spacing. Countersunk holes for bolt on sections. (25/box)
4017 $1.49
B00-088 Sickle section, 3”, Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA (25/box)
2017 $1.45
KDC55 Section bolts and nuts. 5/8” long, box of 50. 8465 $9.26
KDC5501 Section bolts and nuts, 1” long box of 25. 8744 $6.83
KDC55114 Section bolts and nuts, 1 1/4” long box of 25. 4253 $7.50
CH163131 Twin point section to fit JD600 series cutting systems. Replaces JD no. H163131. (25/box)
6915 $2.80
B00-086 Twin point section to fit JD600 series cutting systems. Extra aggres-sive, excels in tough stem soybeans. Stays sharper longer. Made in USA. Sold by the piece in boxes of 25 only.
1618 $2.30
K8007901 Oval shoulder bolt kit for 600 series sections. 50/pkg with nuts. 30618 $22.90
K8008001 Oval shoulder bolt kit for 600 series Drive Head. 10 pcs. 36418 $20.90
Combine Sickle Repairs (OEM Style) - John DeereSections and Section Bolts Order No. Description Stock Retail
Kits for OEM Cutterbar RebuildThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to the OEM style 3” cutting system. Includes sickle, drivehead, guards, holddowns, and bolts.
Order No. Description Stock RetailKIH102015 Complete cutterbar kit for C-IH 1020, 15’. 029599 $1,199.00KIH1020175 Complete cutterbar kit for C-IH 1020, 17.5’. 0293018 $1,299.00KIH102020 Complete cutterbar kit for C-IH 1020, 20’. 0299117 $1,499.00KIH1020225 Complete cutterbar kit for C-IH 1020, 22.5’. 0295318 $1,699.00KIH102025 Complete cutterbar kit for C-IH 1020, 25’. 0299518 $1,999.00KIH102030 Complete cutterbar kit for C-IH 1020, 30’. 0295717 $2,199.00
Steel Auger Finger Order No. Description Stock RetailCF1320699 Steel auger finger for model 1020. Replaces C-IH no. 1320699C1. 0656 $7.99
P87620690 Finger guide for metal auger fingers. 5136 $4.50
*For Overlap sections and related parts see pg. 211
208CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633
Guards, Hold Down Clips, Wear Plates200/900 Series Order No. Description Stock Retail
BU240 2 prong guard, heat treated. Replaces John Deere numbers H61954, H75386, H145791. Used on 200 and 900 series.
2188 $11.60
BU240D Same as BU240 only with double heat treat. Replaces John Deere number H153719.
2889 $12.60
BU340 3 prong guard, heat treated. Replaces JD no. H25603. Used on 200 and 900 series.
72315 $18.95
K5116 Steel hold down clip, fits all 200 and 900 series flex heads and early rigid heads. For use with riveted or bolted sickles.
4631 $5.20
K127801 Cast hold down clip, fits all 200 and 900 series flex heads. For use with riveted or bolted sickles. Replaces JD no. H127801.
2526 $3.60
BDC5150H Extra high arch hold down clip for use at drive head area. Fits all flex heads and early rigid headers. Used on 200 and 900 series.
4055 $7.20
SDC468 Steel wear plate, replaces JD no. E47954. Used on 200 and 900 series.
3318 $1.90
JDC468 Steel wear plate, 6.5” wide, heat treated. Fits 200, 900, 900F and 900R series. 1 used per ft. Replaces JD no. H153157.
0619 $2.29
600 Series Flex Auger and Draper
BU610 Guard for 600 series heads. Has 2 long and 1 short prong. Replaces JD H205448, H213398, H229538. ** Double Heat treated guard *
37115 $16.75
BU615 Guard for 600 series heads. Has 1 long and 2 short prong. Replaces JD H213507, AH205482, AH213055, H205447, 213400. ** Double Heat treated guard **
37115 $16.75
IB1045CB 10 mm x 45 mm Carriage bolt for mounting guards. 2405 $.60
BU620 Standard arch hold down clip, adjustable. Fits 600F, 600FD, 600R, 925D, 930D, 936D. Replaces JD No AH218547.
3148 $5.90
BU625 Adjustable hold down clip for 600 series. Replaces JD AH213058, AH218548.
3840 $6.90
BU328526 Single prong end guard. Used on John Deere platforms 630FD, 635FD, 640FD, 645FD; also 900D, 600D series. Replaces JD no. H228526.
33019 $14.75
BU326928 Hold down clip, center. 2 used on John Deere double drive platforms 630FD, 635FD, 640FD, 645FD. Replaces JD no.AH226928
48418 $21.20
BU28172 Overlap guard, left. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE18172
37819 $26.75
BU29625 Overlap guard, right. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE19625
37818 $26.75
Order No. Description Stock Retail
BU328526
BU326928
BU29625
209Fax 800-528-2554 www.cfcdist.com
Drive Heads
DCAH89498 Drivehead for 200/900 series Auger headers. 03146 $59.00
DCAH220050 Drivehead for the 900 series Draper headers. Replaces JD no. AH220050.
39676 $109.90
DCAH220051 Drivehead for 600F Auger series headers. Replaces JD number AH220051. Does not work on Draper heads.
39556 $79.90
DCH157812JD Nylon sleeve for 600 series drive head. 7846 $6.95
DC231842 Drivehead with nylon sleeve for 600 series Draper Heads. Re-places JD no. AH231842.
39269 $89.90
SC02601 Knife head pin kit, greasable, 27 mm with nylon wear ring and bolts. Fits John Deere 600 series. Replaces JD DE19294; AXE24816 (sealed)
529719 $239.00
DCAH89498
DCAH220051
Order No. Description Stock Retail
Kits for OEM Cutterbar Rebuild for 200 & 900 SeriesThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to the OEM style 3” cutting system. Includes drivehead, sickle, guards, wear plates, holddowns, and hardware.
Order No. Description Stock RetailKJD913 Complete cutterbar kit for JD 213 & 913 flex heads. 029959 $749.00
P179000 Finger guide for poly auger fingers on 900 series. Replaces JD H179000.
3725 $3.90
P202409 Finger guide for poly auger fingers on JD 600F and 600R platforms. Replaces JD H202409.
8238 $4.69
CF228229 Steel Auger finger for Flex Draper series. Used on models 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD. Replaces JD no. AH228229.
9968 $9.99
CF169913 Hardware kit for CF228229, includes spring clips and U-bracket.
0126 $3.00
CF228229KIT Steel Auger finger kit for Flex Draper series. includes spring clips and U-bracket. Used on models 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD.
0897 $14.00
P179000
P205318
P202409
210CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633
Sickles (200/900 series) - Split, without drive head - Can ship UPS
CR19358 Split sickle, 13’ with big tooth sections. 004439 $430.00CR19359 Split sickle, 15’ with big tooth sections, for 215. 000631 $450.00CR28084 Split sickle, 15’ with big tooth sections, for 915. 000637 $450.00CR19360 Split sickle, 16’ with big tooth sections. 006738 $470.00CR19361 Split sickle, 18’ with big tooth sections. 008046 $510.00CR19362 Split sickle, 20’ with big tooth sections. 002349 $540.00CR19363 Split sickle, 22’ with big tooth sections. 004647 $580.00CR19364 Split sickle, 24’ with big tooth sections. 006949 $620.00CR28777 Split sickle, 25’ with big tooth sections. 000057 $625.00CR19365 Split sickle, 30’ with big tooth sections. 006359 $670.00
Order No. Description Stock Retail
Sickles (600F series) - Split, without drive head - Can ship UPS
K8008401 Split sickle, 20’ with big tooth sections. 003431 $490.00
K8008501 Split sickle, 25’ with big tooth sections. 030445 $629.00
K8008601 Split sickle, 30’ with big tooth sections. 039558 $799.00
K8008701 Split sickle, 35’ with big tooth sections. 047165 $882.00
80094 Connector Kit for 600 series split sickle assemblies. 39729 $39.90
DCAH220051 Drivehead for 600 series. Replaces JD number AH220051. 39556 $79.90
DCH157812JD Nylon sleeve for 600 series drive head. 7846 $6.95
DCH156240 Drivehead reinforcing strap for 600 series heads. 0899 $14.00
BU282 Two prong guard without cross bar. Fits Lexion F540 s/n 44100863 & up, F750, F900; Maxflex 1050, 1200. Double heat treated.
22018 $14.60
K5116 Hold down clip. 9131 $4.56
Order No. Description Stock Retail
BU209
Combine Sickle Repairs (OEM Style) - New HollandSections and Section Bolts
K231271(25/box)
Section, black, top serrated, Big Tooth. Fits 970, 971, 972, and 973 series.
5018 $1.50
BDC6700B(25/box)
Double point section. 7 serations per inch, chrome. Fits all NH cutterbars with 1-1/2” cutting system.
3317 $1.90
KDC55 Section bolts and nuts, for use with single point sections, 5/8” long, box of 50.
8465 $9.26
KDC5501 Section bolts and nuts, 1” long box of 25. 8744 $6.83
KDC55114 Section bolts and nuts, for use with single point sections, 1-1/4” long, box of 25.
4253 $7.50
Order No. Description Stock Retail
Guards, Hold Down Clips, Wear Plates
BU215 Double prong guard with cross bar. Used on 971, 973, 71C, 73C; 72C and 74C to s/n PNL017000 and all s/n’s that start with HAJ. Replaces NH no’s. 2199191, 858778, 86521587, 86553340, 86615982.
0898 $14.00
BU299 Double prong guard without crossbar. Used on 72C and 74C with s/n PNL017001 and above. Replaces NH no. 87442324.
4097 $12.91
BU329 Double prong head guard without crossbar. 2 used per head. Used on 72C and 74C with s/n PNL017001 and above. Replaces 87442329.
34018 $14.90
BU245 Double prong guard. Used on 970, and 972 series. Replaces NH no. 65327. 5498 $13.50
K800 Hold down clip. Fits for single drive 970, 971, 972, 973, 71C, and 73C series.
3335 $4.75
BDC5150H High arch hold down clip for use at the drive head area. Fits all flex heads and early rigid heads.
4055 $7.20
DC848094 Drive head. Fits 970, 971, 972, 973, 71C, 72C, 73C; 74C double drive with 3” cut PIN to PLN018300 or PIN starting with HAJ.
05379 $105.00
Order No. Description Stock Retail
BU626
213Fax 800-528-2554 www.cfcdist.com
Sections and Section Bolts
K232011 Section, extra heavy, chrome, 7 serrations per inch. Fits MacDon platforms 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75. Replaces MacDon No 102053, 158516.
B00-085 Section, extra heavy, chrome, 4 serrations per inch. Extra aggressive, excels in tough stem soybeans. Stays sharper longer.
8909 $1.40
KDC55 Section bolts and nuts, for use with single point sections, 5/8” long, box of 50.
8465 $9.26
KDC5501 Section bolts and nuts, 1” long box of 25. 8744 $6.83
K711185 Section kit for the overlap area on double drive sickles. Comes with 3 bottom countersunk sections and 4 top countersunk sections, includes hardware.
52238 $43.00
Order No. Description Stock Retail
Combine Sickle Repairs (OEM Style) - MacDon
Guards, Hold Down Clips, Wear Plates Order No. Description Stock Retail
Sickle Drive HeadsOrder No. Description Stock RetailC132896 LH Drive head for MacDon draper heads. Used on all single drive and the left hand sickle on
double drive headers.03968 $99.00
C132897 RH Drive head for double drive MacDon draper heads. 03967 $99.00
Section, underserrated, black, heavy section. Fits John Deere mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.
788 $1.24
K212082(25/box)
Section, underserrated, chrome, heavy section. Fits John Deere mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.
7418 $2.10
K212241(25/box)
Section, chrome, top serrated, extra heavy, “Big Tooth”.Fits JD mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.
3318 $1.90
K231271(25/box)
Section, black, Big Tooth, extra heavy, top serrated. Fits Case-IH, Ford, New Holland, New Idea, Hesston, Gehl/Owatonna.
2117 $1.60
K231271
Bolts for Sections
KDC55 Section bolts and nuts, 5/8” long, box of 50. 8465 $9.26
KDC5501 Section bolts and nuts, 1” long, box of 25. 8744 $6.83
KDC55114 Section bolts and nuts, 1-1/4” long, box of 25. 4253 $7.50
K904525 Countersunk bolt and lock nut, 5/8” long. Box of 50. 0088 $11.43
K904528 Countersunk bolt and lock nut, 1” long. Box of 50. 7958 $8.53
KBDC174 Section bolts and nuts, 1/4” x 5/8”, 50 pcs. 9874 $11.25
K712730 Section and a half, 2 pcs. on card with rivets. 34015 $14.90
Order No. Description Stock Retail
End Sections
Wear Plates and Holddown Clips
SDC468 K5116 K800 BDC5150H
SDC468 Steel wear plate, heat treated, fits all mowers and mower/conditioners. 3318 $1.90
IDC468N Nylon wear plate, fits all mowers and mower/conditioners. Reduces friction. 5016 $1.50
K800 Hold down clip, steel, fits all single drive mowers and mower/conditioners. (515-066) 3338 $4.75
K5116 Hold down clip, fits all John Deere mowers and haybines. For use with riveted or bolted sickles. (Kondex 515-116).
4634 $5.20
BDC5150H High arch hold down clip for use at the drive head area.(Kondex 515-126) 4056 $7.20
Order No. Description Stock Retail
216CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633
Hay/Mower GuardsUniversal Single Prong GuardOrder No. Description Stock RetailBU107 Single prong guard, universal. Fits AC, Case, Deere, IHC, New Holland, Oliver, New Idea and
other mowers with a 7/16” cutter bar. Replaces DM7003847 $6.90
BU221 Double prong guard. Used on JD mower conditioner models 1207, 1209 and 1214. Also 1219 prior to s/n 710000. Replaces JD no’s E62000 and E52667.**Double heat treated guard **
3798 $13.90
BU254 Non-clog guard. Use with 7/16” carriage bolts. Fits John Deere mower conditioners 1207, 1209, 1214; 1217 and 1219 prior to s/n 710000; 1380, 1424. Windrower auger platforms 183, 220, 230, 240. Windrower drapers 78, 120. Mowers 350, 450.Replaces John Deere E59625, E52547, E57752, E88907.
5498 $13.50
BU906 Hold down clip with single bolt adjustment. Use with BU254 non-clog guards. Replaces 3-piece adjustable hold down. Replaces JD no’s AE57173; E88906.
BU345 Drive head guard. Used on the same models as BU344 shown above. Replaces MacDon 28014, 118345. This guard uses 7/16” carriage bolts.
10014 $14.30
217Fax 800-528-2554 www.cfcdist.com
New Holland Order No. Description Stock Retail
BU215 Double prong guard. Fits all New Holland mower/conditioners, replaces NH no. 219191, 858778, and 86521587. Will interchange with BU245. This guard uses 7/16” carriage bolts.**Double heat treated guard **
0899 $14.00
For Stub Guards see the next page.
New Idea Order No. Description Stock Retail
BU280 Double prong guard. Fits New Idea mower conditioners 290 and 299; Ford 535 mower conditioners; Massey Ferguson 81 Hay Tender. Replaces New Idea 290385
51018 $14.50
BU270 Double prong guard. Fits New Idea 507, 509, 512, 514, 5107, 5109, 5112, 5114. Use 3 BU210 guards at the drive head area. This guard uses 7/16” carriage bolts.
5498 $13.50
BU472717DH Single Prong Guard to fit New Idea mowers 521, 522. Replaces NI no. H472717R2. ** Double Heat Treat **
7679 $10.95
Hesston and Case-IH Order No. Description Stock Retail
CR19615 7’ New Holland bolted sickle assembly, NO drive head. Fits models 451, 456, 461, 467, 477, and 478.
000828 $350.00
CR24776 9’ New Holland bolted sickle assembly, NO drive head. Fits models 469, 488, 489, 492, 495, and 1469.
002137 $390.00
Tie Guards
BT260 Tie guard, used on Case-IH, Gehl, Hesston, New Holland. 51012 $14.50
BT262 Tie plate, high arch, used with BT260. 5950 $8.50
BT261 Tie plate, low arch, used with BT260. 5131 $4.50
Order No. Description Stock Retail
Stub Guards
BU250 Stub guard used on Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers. Replaces Gehl 060494; Hesston 049312; New Holland 257634; Case-IH 049312; Macdon 34974.
8689 $12.40
BU251 Lo-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers.
3430 $4.90
BU252 Hi-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers.
3048 $5.75
Order No. Description Stock RetailBU250 BU251 BU252
John Deere SickleOrder No. Description Stock RetailCR24759 9’ JD bolted sickle assembly, NO drive head. Fits models 1209 and 1219. 002137 $390.00
219Fax 800-528-2554 www.cfcdist.com
Bean Windrower TeethOrder No. Description Wt. Stock RetailIBTLK Bean windrower tooth, to fit 1” round tube. .5 3025 $2.90
Rubber Mounted Rake Teeth Order No. Description Stock Retail
MRMT188 Universal Rubber mounted rake tooth, to fit 1 1/2” round tube. 3025 $2.90
MRMT114 Rubber Rake Tooth, fits New Holland 259 Rolobar rakes. Also fits New Holland 216 and 258 rakes; Allen and TwinStar rakes with left hand hook. Replaces New Holland no. 65668 and 850613.
3726 $3.90
MRMT213 Rubber Rake Tooth, fits New Holland 260 Rolobar rakes. Also fits New Holland 216 rakes, Allen and TwinStar rakes with right hand hook. Replaces New Holland no. 139041, 850614.
9527 $3.70
MRMT718 Rubber Rake Tooth for John Deere & Vermeer. Fits John Deere 700, 705. Vermeer Models: R-9, R-21, R-23, R-23A, R-24, R-24A Replaces John Deere no. AE56204 Vermeer no. 2888-001
9729 3.99
MRMT012 Rubber Rake Tooth for John Deere. Fits John Deere 70, 71, 640, 650, 652, 660, 662, 670, 671, 672, 673, 896A. Replaces John Deere no. AE24953; AE47389.
7829 $4.10
MRMT052 Double Rubber Rake Tooth. Fits wheel rakes made by Circle C, Darf, Farmland, H & S, Morrill, New Idea, Pequea, John Deere & others. Replace John Deere no. 2117RH, 400341 & 491478.