smooth flagstones FINISH Smooth DEPTHS 400 x 400mm 40 Millimetres Rosemount Smo Flagstones COLOURS Rosemount colours COLOURS SILVER BUFF SLATE For ‘Stock Information’ on colours availability - see page 3. Abrasion Resistant Frost Resistant Pedestrian Use AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E specifi[email protected]1
3
Embed
COLOURS Rosemount...Installed to BS 7533-4:2006 NBS Plus Q25 315 SUSTAINABILITY Energy Use 100% renewable Water Used 100% recycled water Recyclable 100% of this product can be recycled
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
smooth flagstones
FINISH
Smooth
DEPTHS
400 x 400mm
40Millimetres
Rosemount
Smo
FlagstonesCOLOURS
Rosem
ount
colo
urs
COLOURS
SILVER
BUFF
SLATE
For ‘Stock Information’ on colours availability - see page 3.
Abrasion Resistant
Frost Resistant
Pedestrian Use
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 1
Product Type Functional flagstones with a smooth finishManufactured to hEN 1339:2003Surface Layer Durable and hard wearing with a minimum surface layer of 8mm. Granite / Quartz Content Not less than 50% natural granite and quartz aggregate in
reduces this naturally occurring chemical reactionBending Strength >3.5Mpa Class 1.Slip / Skid Resistance (USRV) >75 extremely low potential for slip.
Specific slip / skid resistance test results are available on request from our Technical Specification Department
Installed to BS 7533-4:2006NBS Plus Q25 315
SUSTAINABILITY
Energy Use 100% renewableWater Used 100% recycled waterRecyclable 100% of this product can be recycledManufacturing Produced in the UK using responsibly sourced materialsNon-Primary Materials 52 – 60% (surface layer)Waste Wood + Plastic 100% recycledCarbon Footprint We have a new state-of-the-art washing plant which
enables AG to produce paving from 100% reclaimed waste aggregate. Please contact our Technical Specification Department if you are interested in specifying such a product
BREEAM A Rating – according to the Green Guide to Specification 4th edition 2009
A+ Rating can be achieved when used in conjunction with a prepared recycled sub-base
AG RECOMMENDATIONSClose JointingAG recommends a close joint of between 2mm - 5mm as per BS 7533 to cater for product alignment (butt jointing should be avoided).
Jointing SandAG recommends that silver and slate coloured products are jointed with AG’s Granite Sand.
Colour blendingAG recommends that products are blended from 3 packs from alternate sides using full vertical sections.
Please contact our Technical Specification Department for further details.
Rosemount is supplied with a nominal 5mm wide x 3mm deep straight chamfer edge as standard.
EDGES
FINISHES
Smooth finish.
ADVICE + GUIDANCE
For advice and guidance on ordering, installation, good site practice, etc. visit our website: professional.ag.uk.com/advice+guidance
For maintenance guidance and health and safety advice visit our website: professional.ag.uk.com/maintenance
SPACER NIBS
No formed spacer.
TECHNICAL INFORMATIONR
osemo
unttechnical info
rmatio
n
Straight Chamfer Abrasion Resistant
Frost Resistant
Pedestrian Use
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 2
smooth flagstones
FINISH
Smooth
DEPTHS
400 x 400mm
40Millimetres
Rosemount
Smo
Flagstones
Rosemount flags are manufactured from quality aggregates – including granite and quartz. PLANT OF MANUFACTURE (POM): Made at our Ballygawley production plant.
ISO 9001 Quality Management.ISO 14001 Environmental Management.ISO 45001 Occupational Health and Safety Management.CE Marking Download our Declaration of Performance (DOP)