This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Conveyor
Dry
erC
onve
yor
Temp
erat
ure
Cont
rolle
rB
lend
erS
yste
m &
Oth
ers
Inde
xG
ranu
lato
rS
trag
e
輸送機
乾燥機
輸送機
温度調節機
配合機
粉砕機
貯
蔵
システム・他
索
引
H1
H2
L1
L2
L3
W
▲取付面 ▲ mounting surface
(MVH-3 ・6) (MVH-9 ・18)
L1L2
L3
L3 L3H1
H2
W
H
W
H1
H2
L
W1
D1D3
D2
W2
D4
D4
W4
W3
捕集器Collector
MVH-3,6,9,18Suction Hopper
JC-3,6,9,18Jet Clone
APH-1,3,6,9,18Aero Power Hopper
SJC-5,10,15,20Slide Gate Type Suction Hopper
CJC-5,10,15,20Cylinder Type Suction Hopper
●Use new balance weight type flap damper. (It is possible to prevent material jams with the self-cleaning effect.)
Symbol
Model
Volume(L)
Standard Setting
Weight
H2 Dimension when the damper is open.
Unit:mm
Unit:mm
Symbol
Model
This is an optimal collection unit for low volume conveying. Low stock volume prevents the material from reabsorbing moisture and makes frequent material changes easier.Material levels and conditions are easily observed through the sight glass.
Unit:mm
Symbol Model
Volume(L)
Weight
Unit:mm
This collection unit removes dust and blends using airflow power in a single unit.Charge volume can be altered to accommodate to varying injection molding machines.Built-in valve design reduces the pressure on the unit.
Symbol Model
Volume(L)
Weight
●Employs a self-sealing damper that enhances blending performance.
By using a slide gate, the lower hopper can be disconnected.
A Jet clone using an air cylinder that keeps the damper normally-closed
●Use new balance weight type flap damper. (It is possible to prevent material jams with the self-cleaning effect.)
Symbol
Model
Volume(L)
Standard Setting
Weight
H2 Dimension when the damper is open.
Unit:mm
Unit:mm
Symbol
Model
This is an optimal collection unit for low volume conveying. Low stock volume prevents the material from reabsorbing moisture and makes frequent material changes easier.Material levels and conditions are easily observed through the sight glass.
Unit:mm
Symbol Model
Volume(L)
Weight
Unit:mm
This collection unit removes dust and blends using airflow power in a single unit.Charge volume can be altered to accommodate to varying injection molding machines.Built-in valve design reduces the pressure on the unit.
Symbol Model
Volume(L)
Weight
●Employs a self-sealing damper that enhances blending performance.
By using a slide gate, the lower hopper can be disconnected.
A Jet clone using an air cylinder that keeps the damper normally-closed