Highlights • Throughput: up to Category 4 – 150 Mbps DL/ 50 Mbps UL • 3GPP Release 10; software- upgradable to Release 11 • FDD and TDD, up to 20 MHz LTE channels • Enhanced network and application CPU • Wafer-level packaging • Supports VoLTE, location based services, and Wi-Fi SoftAP • Host environments: Android, ChromeOS, Linux, Windows, MAC OS • Versatile interfaces to host system • Includes Sequans AIR™ interference cancelation technology Colibri LTE platform Colibri is extremely cost and power-efficient either as a standalone single-mode 4G LTE solution or as the basis for LTE modules. Colibri has been optimized for LTE Cat 4 device design and includes IoT features for high performance IoT devices. It has been optimized for low cost and low power consumption, delivering industry- leading price/performance. . Applications Colibri is ideal for adding LTE connectivity to mobile routers, CPE, PCs, residential gateways, IoT gateways and routers, and data cards, including M.2 cards and PCEIe Minicards or Half Minicards. Key Benefits of Colibri LTE Platform Ultra small footprint Colibri’s LTE baseband processor (SQN3221), RF transceiver (SQN3241) and power management components are extremely compact due to their ~0.3 mm pitch WLCSP packages, resulting in an ultra small footprint. Optimized price/performance Colibri leverages a decade of Sequans’ 4G chip design optimization experience and delivers up to category 4 peak throughput (150 Mbps downlink). Its high-level integration and highly-efficient architecture represent an ideal balance between features and performance while achieving unprecedented low price points for price-sensitive M2M and IoT applications. Ultra low power consumption Leveraging the power consumption achievements of Sequans’ earlier generation 4G platforms, Colibri’s ultra low power consumption---in both idle and active modes---is best in class. Comprehensive software suite Colibri’s software suite is based on more than a decade of proven field experience. It is running in major 4G deployments around the world and is one of the most mature solutions in the global 4G ecosystem. It includes the entire LTE Release 10 software stack along with all drivers and host applications required for a complete 4G system. It includes a turnkey package for all major operating systems (including Android, ChromeOS, Linux, Windows and MAC OS) and contains Sequans’ standards- compliant OMA-DM, IMS clients and support AT commands for M2M applications. A field diagnostic tool and an RF calibration software tool are delivered for faster time-to- market. Supports numerous interfaces Colibri supports a wide variety of interfaces, including USB 2.0 host and device with integrated transceiver, HSIC, SDIO 3.0 host, USIM, UART and I2S/PCM-TDM (audio). Supports advanced features Colibri provides support for advanced 3GPP Release 10 and 11 features, plus HetNet, VoLTE, embedded IMS, OMA- DM, and LTE location based services. For mobile router applications, Wi-Fi SoftAP can run on SQN3221 when the LTE baseband is connected to a Wi-Fi STA module. Sequans AIR - Active Interference Rejection Sequans AIR is Sequans’ innovative and powerful interference mitigation algorithm implemented on all its LTE platforms. Sequans AIR has been fully tested and proven at both the system and link levels. It has been shown to significantly improve user experience, especially at the cell edge, and increase network capacity up to 2X when all user terminals are equipped with Sequans AIR (see Sequans’ white paper: Mitigating Interference in LTE Networks with Sequans AIR). Full-featured MAC layer Colibri’s SQN3221 baseband features an extremely efficient MAC implementation that is strategically partitioned between hardware and software to maximize available throughput and reduce power consumption. The software runs on a MIPS processor, providing flexibility and improving power efficiency, while the MAC hardware acceleration greatly enhances system performance and throughput. Complete support for mobility is provided, including inter/ intra frequency handover and idle mode. VoLTE support Colibri embeds DSP capability to run the VoLTE media engine in an extremely power efficient manner. Chipset Solution for Category 4 LTE Devices The Colibri LTE Platform is a member of Sequans’ StreamrichLTE™ family of LTE chipset products for broadband devices. It is designed specifically for Category 4 broadband devices such as mobile routers, CPE, tablets, and high-performance IoT devices. Colibri comprises baseband and RF chips, an integrated IoT applications processor running Sequans’ carrier-proven LTE protocol stack, an IMS client, and a comprehensive software package for over-the-air device management and packet routing. Colibri supports VoLTE, Wi-Fi SoftAP and includes Sequans’ powerful interference rejection technology, Sequans AIR™. sequans.com StreamrichLTE is Sequans’ product line for high-end mobile, nomadic and fixed wireless access devices StreamrichLTE solutions provide maximum LTE throughput and support for the advanced features required for the design of the highest performance tablets, mobile computers, and home and portable routers. Colibri LTE Platform