Page 1
cold platesreliably cooling power electronics, lasers and batteries
cold plates for 62 mm power semiconductor modules
cold plates for PrimePack 3 power semiconductor modules
cold plates for 140 × 190 mm² power semiconductor modules
general purpose cold plates
light weight cold plates for low to medium power densities
thermal management
Page 2
Optical Technologies Power Technologies Thermal Management
amS technologies – where technologies meet solutions
AMS Technologies is a leading solution provider and distributor
of high-tech, leading-edge components, systems and equipment,
with more than 35 years of experience to date and currently
serving more than 2000 European customers.
We are the specialists in both components and complete
solutions for Optical Technology, Thermal Management and Power
Technology fields, with access to and long standing relationships
with the most advanced manufacturers in each of those fields.
Drawing extensively on our experience in each of these differing
technologies, and coupling this with our broad system-level
competence, we are able to offer seamless and comprehensive
solutions incorporating complementary aspects from all three key
technology fields.
With an appropriate technical education, an element of
entrepreneurial spirit and many years of design and consultancy
expertise, our sales engineers can rapidly comprehend system
requirements and provide you the customer with a solution
that goes way beyond a simple understanding of our product
datasheets. We take active involvement in the design cycle,
defining and re-defining your specifications, and leading in many
cases to highly specific, customized products and solutions.
Helping you to effectively outsource your production line, we can
even provide you with the necessary leading turnkey contract
manufacturing services in our key competency fields.
AMS Technologies has been delivering solutions into a variety
of high-tech markets, including renewable energies, medical,
defence & aerospace, research & scientific and various other
industrial segments. Our customer base consists of Europe’s
largest leading technology corporations, a network of universities
and research institutes as well as the most promising start-ups.
We thrive by working in a ‘customer first’ environment. Our pan-
European customers are serviced from a network of local offices
in Germany, the UK, France, Italy, Spain, Poland and Sweden,
with a focused operations and logistics centre located in Munich,
Germany.
Our commitment: Identifying the best solution for your project
enabling you to become your customers’ first choice!
Your AMS Technologies team
cold plates – reliably cooling power electronics, lasers & batteries
cold plates for 62 mm power semiconductor modules
cold plates for PrimePack 3 power semiconductor modules
general purpose cold plates
cold plates for 140 × 190 mm² power semiconductor modules
light weight cold plates for low to medium power densities
For high watt densities, when air-cooled heat sinks are inadequate, liquid-cooled cold plates are the ideal high-performance
heat transfer solution. With its broad range of different cold plate technologies, AMS Technologies meets the most specific fluid
compatibility and performance requirements. Friction stir welded (FSW) aluminium cold plates are suitable for glycol-water and
high power semiconductor cooling needs, while press-lock types with copper or stainless steel tubing are ideal for tap or de-ionised
water. For special applications, cold plates with vacuum brazing, flat extrusions or pin fins are available.
These liquid cooled cold plates are specifically designed for three
or four IGBT power modules measuring 108 mm x 62 mm in a
compact and lightweight design. With their advanced features,
the cold plates provide efficient heat transfer between the cold
plate contact area and the IGBT module base plate as well as
a good temperature uniformity across and between modules.
Our cold plates for three to nine PrimePack 3 modules have
been designed for good thermal performance and good
temperature uniformity across and between all modules even
for low fluid flows. Available in different flow rate, pressure
drop, inlet and outlet configurations, these cold plates utilize
modern fluid channel geometries and friction stir welding for
cost effective and safe construction.
Our range of general purpose cold plate products include
tubed cold plates (copper or stainless steel tubes pressed
into a channeled aluminium extrusion), flat tube cold plates
(internal fin to increase performance) and vacuum-brazed
performance-fin cold plates (two plates metallurgically
bonded together with internal fin).
For the standard format of 140 × 190 mm2 footprint IGBT
modules, various cold plates are available for mounting up
to eight modules. With very good thermal performance and
temperature uniformity across and between modules, also at
lower flow rates, the thermal resistance per module can be as
low as 3 K/kW for average fluid temperatures.
Cold plates made of hot-rolled aluminium metal sheets
feature substantially lower weight compared to conventional
cold plates made of aluminium profiles. AMS Technologies
supports you with a custom design aiming at low pressure
drop and thermal uniformity over a large surface. This cost-
effective technology is ideal for applications like cooling of
batteries in transportation & traction.
cold plates 3
Page 3
cold plates for 62 mm power semiconductor modules cold plates for 62 mm power semiconductor modules
4 cold plates cold plates 5
VK-275-150-18 (4 ×) IGBT power modules 108 mm × 62 mm CP 3001 / CP 3001 XP (3 ×) IGBT power modules 108 mm × 62 mm
product dimensions
performance
Water with 50 % glycolmaximum recommended flow 23 l/min
40
20 18
20
2 x 11.8 35G1/4 - 6H 15 6 x 5.5 THRU ALL 16 x 4.2 14.9
M5 - 6H 12.5
0
18
35 4
1
5
65
80
130
1
37,5
1
45
195
2
10
260
2
71
275
0 7
16 20 41
109
134 130
143 150
10
1
5
6
7
4
3 2
Nr Ändring Datum
1 Redrawn 2013-02-19
7 1 75,5x2 EPDM 70 O-ring6 1 VK-275-150-18-D/2 Vattendelare5 1 VK-275-150-18-D/1 Anslutning4 2 MC6S M5x40 A43 2 BRB DIN 125 M5 A42 2 5,3x2,4 EPDM 70 O-ring1 1 VK-275-150-18-A Coldplate
Pos Antal Artikelnummer Benämning
This
docu
men
t mus
t not
be
copi
ed w
ithou
t our
writ
ten
per-
miss
ion,
and
the
cont
ents
ther
eof m
ust n
ot b
e im
part
ed to
a th
ird p
arty
nor
be
used
for a
ny u
naut
horiz
ed p
urpo
se.
Cont
rave
ntio
n w
ill b
e pr
osec
uted
.
1
F
2 3 4 75 6 8
E
D
C
B
A
8761 2 43 5
B
D
A
C
F
E
1VK-275-150-18Coldplate
1:3K SvenssonSkapad Datum
1 (1)
Godkänd Av MaterialRitad Av
Titel / Benämning
Artikel Nr
Skala
Rev Blad
E
Generell tolerans
2013-02-18
CP3001 CP3001 XP Patent Pending
Thermal resistance calculated as the difference between the maximum coldplate surface temp. and the fluid Inlet temp. Fluid: 50/50 Ethylene Glycol & Water. Pressure Drop Includes G3/8 fittings. Empirically tested with 3 IGBT module sized heaters.
Designed to cool three 122x62mm power modules
• Tub Material: Al 6061 • Fin Plate Material : Al 1100-H14 • MDT in-line pin fin inside: Choice of 12
fins per inch or XP (extra performance, 20 fins per inch)
• Pressure tested to 5bar • Mass: 1096 gr • G3/8 (BSPP) ports • Compatible with most coolants:
ethylene glycol, propylene glycol, water, Opticool, Dowfrost, Dowtherm, Dynalene, 3M Novec
Custom Options • Length: Extrusion length can change to
accommodate up to 8 IGBTS • Ports: NPT/SAE/BSPP (G) • Plating options: Electroless Nickel inside
and out available • Go to MicroCooling.com to see all
options.
High performance low cost power electronics coldplates – Call for volume pricing
0
0.05
0.1
0.15
0.2
0.25
0.3
3 6 9 12 15
Flow Rate (L/min)
Pressure Drop (bar)
CP3001 CP3001XP
0.000
0.005
0.010
0.015
0.020
0.025
0.030
0.035
3 6 9 12 15Flow Rate (L/min)
Thermal Reistance (C/W)
CP 3001 CP3001 XP
19
15
10 12 14 16Water flow l/min
Rth °C/kW h-w (average)
COOLING-DIAGRAM
Rth-275-150-1813 03 21
20
Inlet water 45°C
kPa
Water with 50% Glycol
18 22
Recommended max. water flow 23 l/min
ÄndringNrMatreal Ritningsnr.
Benämning
G Eriksson1:1
DatumSkala Datum
Ritad av
AB WEBRAINDUSTRI
23
/ Comp.
31
Cooler VK-275-150-18 no unbalance over and between comp.
27
26
29
25
21
17
0
40
20
80
60
100120
200
160
240280
35
40
18
150
275
60
120
Thermal Resistance (C/W) Pressure Drop (bar)
Page 4
cold plates for 62 mm power semiconductor modules cold plates for PrimePack 3 power semiconductor modules
6 cold plates cold plates 7
WK270 × 150 × 29 (4 ×) IGBT power modules 108 mm × 62 mm VK-370-300-22 (3 ×) PrimePack 3 (89 × 250)
product dimensions performance
Pressure drop: 100 mbar @ 15 l/minthermal resistance rth: 24 K/kW
temperature (Solid) [°C]Surface Plot 1: contours
Drawn
Treatment
ScaleSheet
Date
Date
Date
Checked
Approved
Name
Material DateRevision
Tolerance
QtyFormat
Drawing No.
Weight2017-05-17
A2
ISO 2768 fH-R
---
2548.05
1:11 of 1
T.Stefanczyk
M.Ryba
P.Stoklosa 6063-T5
C001720_0.4004
C001720_004_1702
2017-05-17
2017-07-24
2017-05-17
150 136 110 93
270
1
22,5
0 1
22,5
0
48
1
12,
50
50
15
5 x 5,50 THRU ALL16 x M6 12,5016 x M5 12,50
28,50
37,
50
13 2 x G1/2 15
195
004
Revisions Table
Zone A Revision Description Date Approved
004 2017-07-24
6
A
5
B
C
D
78
E
F
1234
G
H
9101112
F
H
D
E
A
G
B
C
4 36 1810 25791112
Drawn
Treatment
ScaleSheet
Date
Date
Date
Checked
Approved
Name
Material DateRevision
Tolerance
QtyFormat
Drawing No.
Weight2017-05-17
A2
ISO 2768 fH-R
---
2548.05
1:11 of 1
T.Stefanczyk
M.Ryba
P.Stoklosa 6063-T5
C001720_0.4004
C001720_004_1702
2017-05-17
2017-07-24
2017-05-17
150 136 110 93
270
1
22,5
0 1
22,5
0
48
1
12,
50
50
15
5 x 5,50 THRU ALL16 x M6 12,5016 x M5 12,50
28,50
37,
50
13 2 x G1/2 15
195
004
Revisions Table
Zone A Revision Description Date Approved
004 2017-07-24
6
A
5
B
C
D
78
E
F
1234
G
H
9101112
F
H
D
E
A
G
B
C
4 36 1810 25791112
product dimensions
performance
Cooler Plates 47
7022
57
22
17
200
2822
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41
.5
11
4.5
14
8.5
22
1.5
25
5.5
32
8.5
36
2.5
37
0
7.50
292.5
7.5
(4x)
Ø7
(42x
)M5
VK-370-300-22 (3 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average) Pressure drop kPa
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
370
250
300
78 78
22
1 3
T5
T6
T1 - T2 = - 0.2°C / kWT3 - T4 = +0.2°C / kW
2
T4
78
T3T1
T2
G1/2"
Measured
T5 - T6 = +0,1°C / kW
Product dimensions
Performance
Cooler Plates 47
7022
57
22
17
200
2822
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41
.5
11
4.5
14
8.5
22
1.5
25
5.5
32
8.5
36
2.5
37
0
7.50
292.5
7.5
(4x)
Ø7
(42x
)M5
VK-370-300-22 (3 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average) Pressure drop kPa
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
370
250
300
78 78
22
1 3
T5
T6
T1 - T2 = - 0.2°C / kWT3 - T4 = +0.2°C / kW
2
T4
78
T3T1
T2
G1/2"
Measured
T5 - T6 = +0,1°C / kW
Product dimensions
Performance
Page 5
cold plates for PrimePack 3 power semiconductor modules cold plates for 140 x 190 mm² power semiconductor modules
8 cold plates cold plates 9
VK-691-300-22 (6 ×) PrimePack 3 (89 × 250) VK-430-150-22 (2 ×) 140 × 190
product dimensionsproduct dimensions
performanceperformance
ams technologies | Thermal Management Solutions
50 Cooler Plates
22
M6 djup11 (16x)
013
137(150)
014
.5
71.5
128.
5
185.
5
244.
5
301.
5
358.
5
415.
5(4
30)
1.60.02
M10 x 1
27
12
27
Performance
VK-430-150-22 (2 ×) 140 × 190
Product dimensions
Water-Glycol 50-50% ( l/min )
Rth /comp °C/kWh-w (outlet)
10
8
6
4 5 8 97
Pressure drop (kPa)
0
50
100
150
140
190
6 11 13 15
430
22
ams technologies | Thermal Management Solutions
48 Cooler Plates
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41.5
114.
5
148.
5
221.
5
255.
5
7.50
292.5
7.5
691
362.
5
328.
5
435.
5
469.
5
542.
5
576.
5
649.
5
7022
57
22
(84x)M
5
(4x)Ø
7
683.
5
200
2822
17
VK-691-300-22 (6 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average)
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
250
300
78 78
22
1 32
78G1/2"
691
4 5 6
78 78 78
Product dimensions
Performance
ams technologies | Thermal Management Solutions
50 Cooler Plates
22
M6 djup11 (16x)
013
137(150)
014
.5
71.5
128.
5
185.
5
244.
5
301.
5
358.
5
415.
5(4
30)
1.60.02
M10 x 1
27
12
27
Performance
VK-430-150-22 (2 ×) 140 × 190
Product dimensions
Water-Glycol 50-50% ( l/min )
Rth /comp °C/kWh-w (outlet)
10
8
6
4 5 8 97
Pressure drop (kPa)
0
50
100
150
140
190
6 11 13 15
430
22
AMS Technologies | Thermal Management Solutions
54 Cold Plates
200
2822
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41.5
114.
5
148.
5
221.
5
255.
5
7.50
292.5
7.5
691
362.
5
328.
5
435.
5
469.
5
542.
5
576.
5
649.
517
7022
57
22
(84x)M
5
(4x)
Ø7
Option A
Option B
VK-691-300-22 (6 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average) Pressure drop kPa
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
250
300
78 78
22
1 32
78G1/2"
603
4 5 6
78 78 78
Product Dimensions
120110100
90
80
70
60
50
40
30
20
ams technologies | Thermal Management Solutions
48 Cooler Plates
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41.5
114.
5
148.
5
221.
5
255.
5
7.50
292.5
7.5
691
362.
5
328.
5
435.
5
469.
5
542.
5
576.
5
649.
5
7022
57
22
(84x)M
5
(4x)Ø
7
683.
5
200
2822
17
VK-691-300-22 (6 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average)
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
250
300
78 78
22
1 32
78G1/2"
691
4 5 6
78 78 78
Product dimensions
Performance
Water flow l/min
AMS Technologies | Thermal Management Solutions
54 Cold Plates
200
2822
(2x) G 1/2"
33
72
111
150
189
228
267
300
0
41.5
114.
5
148.
5
221.
5
255.
5
7.50
292.5
7.5
691
362.
5
328.
5
435.
5
469.
5
542.
5
576.
5
649.
517
7022
57
22
(84x)M
5
(4x)
Ø7
Option A
Option B
VK-691-300-22 (6 ×) PrimePack 3 (89 × 250)
9
8
7
6
5
4
10 12 14 16 18 20 Water flow l/min
120
100
200
140
80
60
40
20
Rth °C/kW h-w (average) Pressure drop kPa
160
180
220
Water with 50% GlycolMaximum recommended flow 30 l /min
2622 30
250
300
78 78
22
1 32
78G1/2"
603
4 5 6
78 78 78
Product Dimensions
Page 6
cold plates for 140 x 190 mm² power semiconductor modules general purpose cold plates
10 cold plates cold plates 11
VK-920-400-20 (8 ×) 140 × 190 or double sided (16 ×) 140 × 190 CP10 tubed cold plate – 2-pass
product dimensions
performance
specifications
CP10 2-pass 152.4 mm (6.0“) CP10 2-pass 304.8 mm (12.0“)
ams technologies | Thermal Management Solutions
52 Cooler Plates
VK-920-400-20 (8 ×) 140 × 190 or double sided (16 ×) 140 × 190
6
4
12 14 16 18Water flow l/min
Rth °C/kW h-w (average)
22
Inlet water 45°C
80
100
120
140
160180200
240
280
kPa
Water with 50% Glycol
20 24
Recommended max. water flow 30 l/min
8
/ Comp. (One side)/ Comp. (Both sides)
10
320360
88040
190
140
400
20
G 3/4"
40
VK-920-400-20 no unbalance over and between comp.Pressure dropInk. coupling SPT 12
Product dimensions
Performance
04097154
211
236
293
350
407
432
489
546
603
628
685
742
799
0
48
172
228
352
400(64x) M6 through
880
920
20
G 3/4"
40
ams technologies | Thermal Management Solutions
52 Cooler Plates
VK-920-400-20 (8 ×) 140 × 190 or double sided (16 ×) 140 × 190
6
4
12 14 16 18Water flow l/min
Rth °C/kW h-w (average)
22
Inlet water 45°C
80
100
120
140
160180200
240
280
kPa
Water with 50% Glycol
20 24
Recommended max. water flow 30 l/min
8
/ Comp. (One side)/ Comp. (Both sides)
10
320360
88040
190
140
400
20
G 3/4"
40
VK-920-400-20 no unbalance over and between comp.Pressure dropInk. coupling SPT 12
Product dimensions
Performance
04097154
211
236
293
350
407
432
489
546
603
628
685
742
799
0
48
172
228
352
400(64x) M6 through
880
920
20
G 3/4"
40
Our range of standard tubed cold plates provide cost-effective
thermal solutions for component cooling applications where the
heat load is low-to-moderate. These tubed cold plates consist of
copper or stainless steel tubes pressed into a channeled aluminium
extrusion. This “Press-Lock” technology eliminates the need
for performance-limiting epoxy between the tube and the plate,
resulting in superior thermal performance. Each tubed cold plate
has a single tube with no joint, ensuring leak-free operation. The
CP10 2-pass is a cost-effective, single-sided aluminium cold plate
available with either copper or stainless steel tubes. It is ideal for
component cooling applications where the heat load is low-to-
moderate.
Dimensions L × W (CP10G01, CP10G03) .............. 152.4 mm × 88.9 mm / 6.0” × 3.5”(CP10G05, CP10G07) .............. 304.8 mm × 88.9 mm / 12.0” × 3.5” Thickness .............................. 12.7 mm (0.5”)Performance (CP10G01, CP10G03) .............. 0.059 °C/W (CP10G05, CP10G07) .............. 0.029 °C/W Fluid compatibility (CP10G01, CP10G05) .............. Water, common coolants (CP10G03, CP10G07) ............... Deionized waterWetted path (CP10G01, CP10G05) .............. Copper (CP10G03, CP10G07) ............... Stainless steelMounting surface .................. Single-sidedTube ....................................... 9.5 mm (3/8”)Configuration ........................ 2-passFitting .................................... Straight (SB)Plate material ........................ AluminiumMaximum pressure ............... 10 bar (150 psi)
Maximum flow rate ............... 8 lpmShipping weight (CP10G01, CP10G03) .............. 0.68 kg / 1.5 lb(CP10G05, CP10G07) .............. 0.95 kg / 2.1 lb
Page 7
general purpose cold plates general purpose cold plates
12 cold plates cold plates 13
CP10 tubed cold plate – 4-pass CP12 tubed cold plate
specifications specifications
CP10 4-pass 152.4 mm (6.0“) CP12 152 mm (6“)CP10 4-pass 304.8 mm (12.0“) CP12 304 mm (12“)
Our range of standard tubed cold plates provide cost-effective
thermal solutions for component cooling applications where the
heat load is low-to-moderate. These tubed cold plates consist of
copper or stainless steel tubes pressed into a channeled aluminium
extrusion. This “Press-Lock” technology eliminates the need
for performance-limiting epoxy between the tube and the plate,
resulting in superior thermal performance. Each tubed cold plate
has a single tube with no joint, ensuring leak-free operation.
The CP10 4-pass is a cost-effective, single-sided aluminium cold
plate available with either copper or stainless steel tubes. It is ideal
for component cooling applications where the heat load is low-to-
moderate.
Our range of standard tubed cold plates provide cost-effective
thermal solutions for component cooling applications where the
heat load is low-to-moderate. These tubed cold plates consist of
copper tubes pressed into a channeled aluminium extrusion. This
“Press-Lock” technology eliminates the need for performance-
limiting epoxy between the tube and the plate, resulting in superior
thermal performance. Each tubed cold plate has a single tube with
no joint, ensuring leak-free operation. The CP12 is a dual-sided,
copper tubed cold plate that offers high performance and a large
mounting area. The tubes of the CP12 cold plates are coplanar with
the plate to allow for dual-sided mounting. The cold plate’s tube
side offers higher performance as the copper tubes are in direct
contact with the component being cooled.
Dimensions L × W (CP10G14, CP10G16) .............. 152.4 mm × 88.9 mm / 6.0” × 3.5” (CP10G18, CP10G20) .............. 304.8 mm × 88.9 mm / 12.0” × 3.5” Thickness .............................. 12.7 mm (0.5”)Performance (CP10G14, CP10G16) ............. 0.051 °C/W (CP10G18, CP10G20) .............. 0.008 °C/W Fluid compatibility (CP10G14, CP10G18) .............. Water, common coolants (CP10G16, CP10G20) ............... Deionized waterWetted path (CP10G14, CP10G18) .............. Copper (CP10G16, CP10G20) ............... Stainless steelMounting surface .................. Single-sidedTube ....................................... 9.5 mm (3/8”)Configuration ........................ 4-passFitting .................................... Straight (SB)Plate material ........................ AluminiumMaximum pressure ............... 10 bar (150 psi)
Maximum flow rate ............... 8 lpmShipping weight (CP10G14, CP10G16) .............. 0.68 kg / 1.5 lb(CP10G18, CP10G20) .............. 0.95 kg / 2.1 lb
Dimensions L × W (CP12G01) ............................... 152 mm × 127 mm / 6” × 5” (CP12G05) .............................. 304 mm × 127 mm / 12” × 5” Thickness .............................. 12.7 mm (0.5”)Performance (CP12G01) .............................. 0.009 °C/W (CP12G05) .............................. 0.004 °C/W Fluid compatibility ................ Water, common coolants Wetted path ........................... Copper Mounting surface .................. Dual-sidedTube ....................................... 9.5 mm (3/8”)Configuration ........................ 4-passFitting .................................... Straight (SB)Plate material ........................ AluminiumMaximum pressure ............... 10 bar (150 psi)Maximum flow rate ............... 8 lpmShipping weight (CP12G01) .............................. 1.00 kg / 2.2 lb(CP12G05) .............................. 1.72 kg / 3.8 lb
Page 8
Our CP20 aluminium flat tube cold plates are very thin, compact,
and lightweight cold plates, consisting of header tubes welded
to a unique micro-channel aluminium extrusion. These cold
plates offer extremely low thermal resistance, achieved by thin
mounting surfaces and internal fin, which create a large surface.
They feature excellent thermal uniformity as coolant flows below
the entire surface. Their high performance and small size make
them ideal for cooling small, high watt-density components such
as thermoelectric modules. The CP20 cold plates are only 3.3 mm
(0.13”) thick and 0.05 kg (0.1 lbs), making them a perfect fit for
applications where space is limited. Their large internal surface
area combined with low pressure drop make the CP20 ideal for
use with viscous and poor heat transfer fluids such as EGW, oils,
Fluorinert® and Polyalphaolefin (PAO).
general purpose cold plates general purpose cold plates
14 cold plates cold plates 15
CP15 tubed cold plate CP20 flat tube cold plate
specificationsspecifications
CP15 152.4 mm (6“) CP15 304.8 mm (12“)
CP20 flat tube cold plate
Our range of standard tubed cold plates provide cost-effective
thermal solutions for component cooling applications where the
heat load is low-to-moderate. These tubed cold plates consist of
copper tubes pressed into a channeled aluminium extrusion. This
“Press-Lock” technology eliminates the need for performance-
limiting epoxy between the tube and the plate, resulting in superior
thermal performance. Each tubed cold plate has a single tube with
no joint, ensuring leak-free operation.
Components can be mounted on both sides of CP15, making this
compact and lightweight cold plate ideal for applications where heat
loads are moderating and space is at a premium. The tubes of the
CP15 cold plates are coplanar with the plate to allow for dual-sided
mounting. The cold plate’s tube side offers higher performance as
the copper tubes are in direct contact with the component being
cooled.
Dimensions L × W (CP15G01) ............................... 152.4 mm × 95.3 mm / 6.0” × 3.8” ” (CP15G05) .............................. 304.8 mm × 95.3 mm / 12.0” × 3.8” Thickness .............................. 7.6 mm (0.3”)Performance (CP15G01) .............................. 0.008 °C/W (CP15G05) .............................. 0.004 °C/W Fluid compatibility ................ Water, common coolants Wetted path ........................... Copper Mounting surface .................. Dual-sidedTube ....................................... 6.4 mm (1/4”)Configuration ........................ 6-passFitting .................................... Straight (SB)Plate material ........................ Aluminium
Maximum pressure ............... 10 bar (150 psi)Maximum flow rate ............... 4 lpmShipping weight (CP15G01) .............................. 0.95 kg / 1.3 lb(CP15G05) .............................. 1.13 kg / 2.5 lb
Dimensions L × W ................. 51 mm × 51 mm (2” × 2”) Thickness .............................. 3.3 mm (0.1”)Performance .......................... 0.044 °C/W Fluid compatibility ................ EGW, oils Wetted path ........................... Aluminium Mounting surface .................. Single-sidedTube ....................................... 9.5 mm (3/8”)Configuration ........................ U (CP20G01), Z (CP20G03)Fitting .................................... Straight (SB)Plate material ........................ AluminiumMaximum pressure ............... 10 bar (150 psi)Maximum flow rate ............... 4 lpmShipping weight .................... 0.27 kg / 0.6 lb
Page 9
cold plates 17
general purpose cold plates
CP30 vacuum brazed cold plate
specifications CP30 vacuum brazed cold plate
Performance-fin cold plates offer extremely high performance and
consist of two plates vacuum-brazed together with internal fin. Our
standard performance-fin cold plate is our aluminium CP30.
It offers a large 198 mm × 279 mm (7.8˝ × 11˝) mounting area so
it is ideal for both board and multiple component liquid cooling in
high heat load applications. It is flat on both sides to allow dual-
sided mounting, and the surface on one side is 13 mm (0.5”) thick
to enable machining, drilling, and tapping for board/component
attachment.
The CP30 cold plate is designed for prototyping purposes; most
volume applications require customized cold plates tailored to
precisely match performance and geometric requirements. The
CP30 cold plate contains high performance corrugated aluminium
fin brazed into the cavity beneath the mounting surface of the
cold plate. The fin creates turbulence, which minimizes the fluid
boundary layer and reduces thermal resistance.
Dimensions L × W ................. 198.1 mm × 279.4 mm (7.8” × 11”) Thickness .............................. 19.05 mm (0.75”)Performance .......................... 0.005 °C/W Fluid compatibility ................ EGW, oils Wetted path ........................... Aluminium Mounting surface .................. Dual-sidedConfiguration ........................ SquareFitting .................................... 9/16-18 UNF-2BPlate material ........................ AluminiumMaximum pressure ............... 10 bar (150 psi)Maximum flow rate ............... 23 lpmShipping weight .................... 2.95 kg / 6.5 lb
light weight cold plates for low to medium power densities
cost effective cold plates with uniform temperature distribution
main specifications (typical)
Plate thickness 4 mm
Weight 4 to 9 kg/m²
Cooling surface flatness approx. 0.2 mm
Materials Al 1050 + 5005
Cooling fluid Water / Ethylene Glycol 50 – 50, HFC 134a, R600a
dT across plate approx. 3 K
custom design optimized for low pressure drop
uniform temperature distribution across the plate surface
cost effective
ideal for battery cooling applications in transportation & traction
temperature (Solid) [°C]Surface Plot 1: contours
16 cold plates
key features
Page 10
associated products
heat exchangers
AMS Technologies’ heat ex-
changer portfolio includes
tube-fin heat exchangers (cop-
per or stainless steel tubes
expanded into copper or alu-
minium fin for good and cost
effective heat removal), oil
cooler flat tube heat exchang-
ers (aluminium flat tube fluid channels vacuum brazed with alu-
minium fin for optimum cooling with poor heat transfer fluids such
as oil and EGW) and liquid-to-liquid brazed plate heat exchangers
(herringbone construction for efficient maximum heat transfer in a
compact and reliable package)
temperature sensors
Accurate and fast temperature
sensors are essential for preci-
sion temperature control.
Amongst the different types of
temperature sensors, thermis-
tors provide very high sensitiv-
ity, small size and appropriate
speed. AMS Technologies’ ex-
tensive range of NTC thermistor temperature sensor probes with
base resistance values from 5 kΩ to 231.5 kΩ include various
types from ultraminiature bare bead, epoxy coated and pipe ver-
sions (poly-imide, brass, brass nickel, stainless steel – threaded and
unthreaded) to flange mount and plate models. Sizes range from
0.5 mm to 6.5 cm with Teflon coated lead lengths from 5 cm to
45 cm.
compressors
Our miniature rotary compres-
sors are the result of a break-
through in compressor tech-
nology featuring low vibration
and low noise operation. They
can be utilized in many ther-
mal management applications
from compact recirculating
chillers, cabinet coolers, direct cooling of electronic components,
and white goods to mobile refrigeration. For smooth and easy tem-
perature adjustment, these miniature rotary BLDC compressors
with cooling capacities up to 2000 W are continuously speed-con-
trollable via the frequency of a square wave signal. The inverter
board is included, a test function board for easy evaluation is also
available as an option.
recirculating chillers
Featuring precise temperature
control, quiet operation and
high reliability, our recirculat-
ing chillers range from com-
pact thermoelectric chillers
with a cooling capacity of
160 W to a multitude of stand-
alone and rack-mount devices
based on thermoelectric or compressor engines to very powerful
chillers capable of dealing with heat loads up to 95 kW. Beyond the
standard versions, a variety of options can be provided for different
fluids, pumps, low temperatures below freezing, control and moni-
toring, additional heating and other aspects – all the way to fully
customized solutions tailored to your requirements.
full chiller power in shoe box size
Our mini Recirculating
Chiller development
kit (mRC-KIT) features
a vapor compression
circuit and a closed,
pressurized recircu-
lating water circuit –
like a conventional
chiller five times the
size. On the refrigeration side, a miniature rotary compressor, custom-
ized condenser and evaporator are utilized to reduce size. The twin
pump compressor’s BLDC motor is speed controlled by an inverter,
offering low vibration and low noise throughout the speed range. Com-
pact centrifugal pumps and a compact tank on the water circuit side
are also contributing to the compact size. Due to pressure applied on
the suction side, the water pumps operate smoothly and without cavi-
tation and the closed system prevents ingress of bacteria and oxygen,
keeps the coolant clean and thus helps to extend maintenance inter-
vals.
custom cooling unit for biomedical reagents
A haemostasis analy-zing instrument per-forms various tests to measure blood coagulation. In one area of the instru-ment the blood sam-ples are kept at a constant tempera-
ture of +37°C. Right next to the blood samples the reagents need to be conserved at constant +15 °C. The cooling of the reagents is done by forced air flow. For a redesign of the cooling system in their STA-R® haemostasis analyzer, French pharmaceutical labora-tory STAGO turned to AMS Technologies. After careful empirical investigation and determination of the cool-ing capacity, AMS Technologies developed a customized cooling unit with a powerful 24 VDC mini compressor with linear speed control, small evaporator and condenser heat exchangers, fans and other components of a refrigeration cycle – and successfully placed all these components inside the given restricted space. During the development the AMS Technologies experts also op-timized air flow rate and duct to achieve uniform temperatures across the reagents.
from technology components to turnkey solutions
We want to accelerate your success, which is why AMS Technologies has invested in two design centers: in Krakow, Poland, and in the United Kingdom. Our goal is to augment your team’s key competencies by providing engineering services that are not core to you or where you may struggle with available resources to finish your projects. From design services to prototype development to complete turnkey solutions, our collaborative approach has already helped many customer projects to move from concept to production.
Design, prototyping and “proof of concept” Development of turnkey solutions to the customer’s order Design-in, systems integration, realization of entire design projects Development of customized specification sheets Effective project management of any product development Interdisciplinary system-level integrated design Appropriate subcontractor selection and production support Simulations and modeling of system-level designs Installation, training and servicing
cold plates 1918 cold plates
Page 11
info@amstechnologies.comwww.amstechnologies.comwww.amstechnologies-webshop.com
Copy
right
201
8 by
AM
S Te
chno
logi
es R
ev. 5
1-18
-01
Cold
Pla
tes
Germany amS technologies agFraunhoferstr. 22 82152 martinsried, germanyPhone + 49 (0) 89 895 77 0
FranceamS technologies S.a.r.l. Silic 649 – Bâtiment magnolia16, avenue du Québec 91945 Courtaboeuf CedexPhone + 33 (0) 1 64 86 46 00
ItalyamS technologies S.r.l. Corso Sempione, 215/B20025 legnano (mI), ItalyPhone + 39 0331 596 693
PolandamS technologies Sp. z o.o.mogilska 69 St, Floor 231-545 Krakow, PolandPhone + 48 (0) 12 346 24 16
SPaInamS technologies S.l. C/Filadors 35, 3o, 7a 08208 Sabadell, SpainPhone + 34 93 380 84 20
SwedenamS technologies nordicazpect Photonics aBaminogatan 3443153 mölndal, SwedenPhone + 46 (0) 8 55 44 24 80
UnIted KInGdomamS technologies ltd. nene house, Drayton Way Daventry, northamptonshire nn11 8ea, United KingdomPhone + 44 (0)1455 556360
enabling your ideas. Optical, Power and thermal management technologies