76 ■ DER7052 Power Inductors for Digital Amplifier Frequency Range:~1MHz Inductance Range:7.5 ~22µH Temperature Coefficient:±10%max. Fixed Characteristics of DC Limited Current 0 2 4 6 8 10 12 14 16 18 20 22 24 26 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 DC Current (A) Inductance (μH) DER7052-220 DER7052-150 DER7052-100 Coil Selection Guide 1.6 7.6 □ 7 .0 9.9max. 5.5max. (6.1) (1.0) (1.0) Recommended Land Pattern 推奨ランドパターン Type a b c DER7052 5.3 9.2 1.9 b a c Characteristics of Temperature rise 0 5 10 15 20 25 30 35 40 45 50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 DC current (A) ΔT (°C) DER7052-220 DER7052-150 DER7052-100 記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes:Graphs are based on typical values of each type, not specific values. Parts Code 品番コード例 Inductance Code インダクタンスコード Tolerance 許容差 Type タイプ M 100 DER7052 Features ● Suitable for LPF inductor for digital amplifier (Class-D) ● Ideal for flat TVs(LCD), home audio device, and a variety of electronic device ● Low radiation nose by magnetically shielded construction ● Realized high current, low registance and high quality sound ● AEC-Q200 compliant spec available upon request ● Operating temperature:-40℃~ +125℃ (The self-heating is included) 特 長 ●デジタルアンプ(D級アンプ)のLPF用インダクタに最適 ●フラットTV(LCD)、ホームオーディオ機器、 各種電子機器などに最適 ●放射ノイズを防ぐ閉磁路構造 ●大電流、低抵抗、高音質を実現 ● AEC-Q200 対応可能 ●使用温度範囲:-40℃~+125℃(自己発熱を含む) Measurement Frequency for Inductance : 100kHz DC saturation allowable current : Inductance drift is within -25% at the superposition. Temperature rise allowable current : A rise in temperature of core surface is within 40℃. インダクタンス測定周波数:100kHz 直流重畳許容電流は、インダクタンス変化率 -25% 以内の直流電流値。 温度上昇許容電流は、コアの表面温度上昇が 40℃以下の直流電流値。 Code (μH) 7R5 7.5 33.0 25.0 3.4 3.0 100 10 48.0 37.0 3.2 2.4 120 12 61.0 47.0 2.8 2.1 150 15 75.0 57.0 2.5 1.8 220 22 130.0 100.0 2.1 1.4 Inductance インダクタンス ±20%(M)/±30%(N) DC saturation allowable current 直流重畳許容電流 (A) Temperature rise allowable current 温度上昇許容電流 (A) DC Resistance 直流抵抗 (mΩ) max. - typical
25
Embed
Coil Selection Guide52ebad10ee97eea25d5e-d7d40819259e7d3022d9ad53e3694148.r84.cf3.rackc…Coil Selection Guide Inductance DC Resistance DC saturation Temperature rise インダクタンス
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
7 6
■DER7052Power Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:7.5~22µHTemperature Coefficient:±10%max.
Fixed
Characteristics of DC Limited Current
0
2
4
6
8
10
12
14
16
18
20
22
24
26
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
DC Current (A)
Indu
ctan
ce (μ
H)
DER7052-220
DER7052-150
DER7052-100
Coil Selection Guide1.
6
7.6
□7.0
9.9max. 5.5max. (6.1) (1.0)(1.0)
Recommended Land Pattern 推奨ランドパターン
Type a b c
DER7052 5.3 9.2 1.9
b
a
c
Characteristics of Temperature rise
0
5
10
15
20
25
30
35
40
45
50
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
DC current (A)
ΔT (°
C)
DER7052-220DER7052-150
DER7052-100
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。Notes:Graphs are based on typical values of each type, not specific values.
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M100DER7052
Features ● Suitable for LPF inductor for digital amplifier (Class-D) ● Ideal for flat TVs(LCD), home audio device, and a variety of electronic device ● Low radiation nose by magnetically shielded construction ● Realized high current, low registance and high quality sound ● AEC-Q200 compliant spec available upon request ● Operating temperature:-40℃~+125℃
(The self-heating is included)
特 長 ●デジタルアンプ(D級アンプ)のLPF用インダクタに最適
●フラットTV(LCD)、ホームオーディオ機器、
各種電子機器などに最適
●放射ノイズを防ぐ閉磁路構造
●大電流、低抵抗、高音質を実現
●AEC-Q200対応可能
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Measurement Frequency for Inductance : 100kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M100DBE7210H
Features ● The optimal design realizes high quality sound and low distortion ● Compact size using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance
特 長 ●最適設計により、高音質・低歪を実現
●平角線使用(無酸素銅線対応)
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
Coil Selection GuideInductance DC Resistance DC saturation Temperature rise
インダクタンス 直流抵抗 (mΩ) allowable current allowable current
±20% (M) 直流重畳許容電流 温度上昇許容電流
Code (μH) max. - typical (A) (A)
100 10 23.0 18.0 6.0 3.6
150 15 27.0 21.0 5.0 3.5
220 22 38.0 29.0 4.3 3.0
Measurement Frequency for Inductance: 1kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:1kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
CONNECTION
(BOTTOM VIEW)
7 8
Frequency Range:~1MHzInductance Range:4.8~22µHTemperature Coefficient:±10%max.
Power Inductors for Digital Amplifier
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ● Operating temperature:-40℃~+125℃
(The self-heating is included)
特 長 ●2 in 1構造による省スペース化を実現
●最適設計により、高音質・低歪を実現
●平角線使用により小型化を実現(無酸素銅線対応)
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
●AEC-Q200対応可能
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
■ 7G08B
8.0
8.0
9.0max.
0.8
4.4 1.8
5.0
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
特 長●2 in 1構造による省スペース化を実現
●最適設計により、高音質・低歪を実現
●平角線使用により小型化を実現
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
●AEC-Q200対応可能
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size using flat wire ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ● Operating temperature:-40℃~+125℃
(The self-heating is included)
Coil Selection Guide
Measurement Frequency for Inductance: 1kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:1kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
■ 7G09B
9.0
10.0 10.0 max.
5.5
1.2
6.2 1.9
Frequency Range:~ 1MHzInductance Range:8.2~33µHTemperature Coefficient:±10%max.
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ● Operating temperature:-40℃~+125℃
(The self-heating is included)
特 長 ●2 in 1構造による省スペース化を実現
●最適設計により、高音質・低歪を実現
●平角線使用により小型化を実現(無酸素銅線対応)
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
●AEC-Q200対応可能
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Measurement Frequency for Inductance: 1kHzDC saturation allowable current : Inductance drift is within -25%
at the superposition.Temperature rise allowable current : A rise in temperature of core
DC saturation allowable current : Inductance drift is within -25%at the superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size is realized using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ●Suffix HH : Tape on top of product. ● Operating temperature:-40℃~+125℃
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size is realized using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ●Suffix HH : Tape on top of product. ● Operating temperature:-40℃~+125℃
(The self-heating is included)
特 長 ●2 in 1構造による省スペース化を実現
●最適設計により、高音質・低歪を実現
●平角線使用により小型化を実現(無酸素銅線対応)
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
●AEC-Q200対応可能
●末尾/HH: 上面テープ品
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Coil Selection Guide
Measurement Frequency for Inductance: 100kHzDC saturation allowable current : Inductance drift is within -25%
at the superposition.Temperature rise allowable current : A rise in temperature of core
surface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Recommended Land Pattern 推奨ランドパターン
c
ab
d
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M100DBL9097H
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Features ● Space reduction is realized by 2 in 1 construction ● The optimal design realizes high quality sound and low distortion ● Compact size is realized using flat wire (using OFC wire) ● Small size and SMD type, Magnetic-shielded ● High current, Low resistance ● AEC-Q200 compliant spec available upon request ●Suffix HH : Tape on top of product. ● Operating temperature:-40℃~+125℃
(The self-heating is included)
特 長 ●2 in 1構造による省スペース化を実現
●最適設計により、高音質・低歪を実現
●平角線使用により小型化を実現(無酸素銅線対応)
●小型サイズ、面実装タイプ、磁気シールド構造
●大電流、低抵抗
●AEC-Q200対応可能
●末尾/HH: 上面テープ品
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Measurement Frequency for Inductance: 100kHzDC saturation allowable current : Inductance drift is within -25%
at the superposition.Temperature rise allowable current : A rise in temperature of core
surface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Recommended Land Pattern 推奨ランドパターン
c
ab
d
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Features● Low profile and low radiation noise by magnetically shielded structure.● Space reduction is realized by 2 in 1 structure.● High current, low resistance using flat wire● AEC-Q200 compliant spec available upon request● Operating temperature:-40℃~ +125℃
Features● Low profile and low radiation noise by magnetically shielded structure.● Space reduction is realized by 2 in 1 structure.● High current, low resistance using flat wire● AEC-Q200 compliant spec available upon request● Operating temperature:-40℃~ +125℃
(The self-heating is included)
Type a b c dDBF1157HB 14.9 20.5 3.5 7.7
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Measurement Frequency for Inductance : 100kHzDC saturation allowable current : Inductance drift is within -25% at
the superposition.Temperature rise allowable current : A rise in temperature of core
Frequency Range:~1MHzInductance Range:10~1000µHTemperature Coefficient:+600±500ppm/℃
Frequency Range:~1MHzInductance Range:10~1000µHTemperature Coefficient:+500±400ppm/℃
記事: 1 . 特性グラフは各タイプの代表値を基に作成しています。
規格値ではありません。
2. 電流値はインダクタンスが 10% 低下する時の値です。
Notes: 1. Graphs are based on typical values of each type, not spec. values.2. DC current value is being measured at 10% decrease of inductance.
Fixed Fixed
Features ● Suitable for digital power amplifier ● Accomplished low total harmonics distortion as compared with our current type ● Possible to decrease reflection noise ● Available for high density mount due to compact size ● Best suited as a choke coil for power supply
Features● Inductor for LPF of Digital Amplifier (Class-D).● Microminiaturization and 2 in 1 vertical type structure realized space-saving.● Simple and original magnetic shield structure.● Low distortion and high quality sound are realized by using low-loss core and OFC (Oxygen Free Copper) wire● Operating temperature:-40℃~ +125℃ (The self-heating is included)
Characteristics of DC superposition
02468
1012141618202224
0 2 4 6 8 10 12 14DC Current (A)
Indu
ctan
ce (μ
H)_
DLM1219-100M
DLM1219-160M
DLM1219-200M
8 9
http://www.sagami-elec.co.jp
Frequency Range:~1MHzInductance Range:10~22µHTemperature Coefficient:±10%max.
Power Inductors for Digital Amplifier
特 長●デジタルアンプ(D級アンプ)のLPF用インダクタとして
最適です
●縦型2in1構造により、省スペースを実現した
●シンプルで独自な磁気シールド構造
●低ロス材および無酸素銅線(OFC)採用により低歪・高音質
を実現した
●AEC-Q200対応可能
●使用温度範囲:-40℃~+125℃(自己発熱を含む)
Features● Inductor for LPF of Digital Amplifier (Class-D).● Microminiaturization and 2 in 1 vertical type structure realized space-saving.● Simple and original magnetic shield structure.● Low distortion and high quality sound are realized by using low-loss core and OFC (Oxygen Free Copper) wire.● AEC-Q200 compliant spec available upon request● Operating temperature:-40℃~ +125℃ (The self-heating is included)
Measurement Frequency for Inductance : 100kHz
DC saturation allowable current : Inductance drift is within -25%at the superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Coil Selection Guide
■ DLM1623 / M
15.0max.
15.9
12.0
10.0
※
23.0max. 3.5
φD
Inductance φD
10μH 0.9
15μH 0.7
22μH 0.65
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
※DLM1623Mのみ中央に端子あり(5端子)
There is a terminal on center of a base only at DLM1623M. ( total 5 terminals )
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M100DLM1623M
S
F
S
FCONNECTION
(BOTTOM VIEW)
Fixed
DC satu r at io nal lo wable c u r r e n t
直 流 重 畳 許 容 電 流(A )
T e m pe ratu r e r is eal lo wable c u r r e n t
温 度 上 昇 許 容 電 流(A )
C ode (μ H ) D LM 1623 / D LM 1623M D LM 1623 / D LM 1623M100 10 12 .0 9 .0 15 .0 6.4150 15 22 .6 17 .6 11 .0 5.2220 22 31 .0 23 .6 10 .0 3.8
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Characteristics of DC Limit Current
0
10
20
30
40
0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0DC Current (A)
Indu
ctan
ce (μ
H) )
7G13C-100M
7G13A-100M
7G13A-220M
7G13A-330M
特 長 ●平角線使用
●放射ノイズを防ぐ閉磁路構造
●小型、低抵抗、大電流
Features ● Compact size using flat wire ● Low radiation noise by magnetically shielded construction ● Small size, low resistance and High current
Coil Selection Guide
Measurement Frequency for Inductance: 1kHz
DC saturation allowable current : Inductance drift is within -25% at thesuperposition.Temperature rise allowable current : A rise in temperature of surfaceof core is within 40℃.
Measurement Frequency for Inductance: 1kHzDC saturation allowable current : Inductance drift is within -25% at thesuperposition.Temperature rise allowable current : A rise in temperature of surfaceof core is within 40℃.
TYPE L(μH) W P t A B10 7.6 3.315 4.422 5.327 4.433 5.34.7 0.5101522
7G14A
7G14C
1.8 9.2
1.8 9.2
0.5
0.339.6
0.33
3.3
4.4
7.6
9.6
Tolerance 7G14A 7G14C
±30% (N) - 4.7μH
±20% (M) 10μH ~ 33μH 10μH ~ 22μH
Inductance range インダクタンス範囲
Features ● Compact size using flat wire ● Low radiation noise by magnetically shielded construction ● Small size, low resistance and High current
特 長 ●平角線使用
●放射ノイズを防ぐ閉磁路構造
●小型、低抵抗、大電流
9 2
■ 7G14D / J
Fixed
Frequency Range:~1MHzInductance Range:10µHTemperature Coefficient:±10%max.
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Coil Selection Guide
Measurement Frequency for Inductance: 1kHzDC saturation allowable current : Inductance drift is within -25% at thesuperposition.Temperature rise allowable current : A rise in temperature of surfaceof core is within 40℃.
インダクタンス測定周波数:1kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M1007G14D
C ode (μ H) 7 G 1 4D 7 G 1 4J 7G 14 D 7 G 1 4J
100 10 9.2 7.5 23.4 19.3 15.0 18.0 7.0 4.6
In du c tan c eイン ダ クタ ン ス
± 20 % ( M )
7 G 1 4 D
DC Re sis tan c e直 流 抵 抗 ( m Ω )
m ax . - typic al
DC satu rat io nallo wable c u r re n t
直 流 重 畳 許 容 電 流(A)
T e m pe ratu re r iseallo wable c u r re n t
温 度 上 昇 許 容 電 流(A)
7G 14 J
Features ● Compact size using flat wire ● Low radiation noise by magnetically shielded construction ● Small size, low resistance and High current
特 長 ●平角線使用
●放射ノイズを防ぐ閉磁路構造
●小型、低抵抗、大電流
Power Inductors for Digital Amplifier
Characteristics of DC superposition
0
2
4
6
8
10
12
14
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
DC Current (A)
IND
UC
TAN
CE
(μH
)_ 7G14J-100M
7G14D-100M
14.0
9.6 16.0max 5.0
A P
4.4
t1.0 max
A1.81.15
t0.5
0.38
Type7G14D7G14J
P9.210.0
9 3
http://www.sagami-elec.co.jp
Power Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:10~33µHTemperature Coefficient:±10%max.
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M1007G14M
■ 7G14N
Features● Four terminal structure realize high shock resistance.(7G14M)● High current, low resistance using flat wire.● OFC(Oxygen Free Copper) wire is available for High quality sound.● Low radiation noise by magnetically shielded structure.● AEC-Q200 compliant spec available upon request.(7G14M)● Operating temperature : -40℃~ +125℃ (The self-heating is included)
T e m pe ra tu re r is ea l lo w a b le c u r re n t
温 度 上 昇 許 容 電 流(A )
7 G 1 4 N
インダクタンス測定周波数:1kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Measurement Frequency for Inductance: 1kHz
DC saturation allowable current : Inductance drift is within -25% at thesuperposition.Temperature rise allowable current : A rise in temperature of surfaceof core is within 40℃.
Inductance DC Resistance DC saturation allowable current Temperature rise allowable current
インダクタンス 直流抵抗 (mΩ) 直流重畳許容電流 温度上昇許容電流
±20% (M) max. - typical (A)
Code (μH) 7G17A / C 7G17B / D 7G17A / C 7G17B / D 7G17A / C 7G17B / D
100 10 18.0 15.7 10.7 9.2 26.0 26.0 6.0 8.2
220 22 18.0 15.7 10.7 9.2 13.0 13.0 6.0 8.2
330 33 18.0 15.7 10.7 9.2 7.5 7.5 6.0 8.2
(A)
■ 7G17B / D
12.0
8.5
1.25
19.3max. 3.5
1.0 max.
12.5
φ1.0
17.5
15.0
0.75
Fixed
19.3 max.
12.5
8.5
17.5
15.0 φ1.0
φ0.8
3.5
Characteristics of D.C. Superposition
0
10
20
30
40
0 10 20 30 40
DC Current (A)
Indu
ctan
ce(μ
H)
7G17□-100M
7G17□-220M
7G17□-330M
Measurement Frequency for Inductance: 1kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:1kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
S
FCONNECTION
(BOTTOM VIEW)
Frequency Range:~1MHzInductance Range:10~33µHTemperature Coefficient:±10%max.
Fixed
S
FCONNECTION
(BOTTOM VIEW)
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M1007G17A
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Features ● Suitable for High power home theater system and AV amplifier ● Low radiation noise by magnetically shielded construction ● 7G17A/C:High quality sound is realized using OFC wire ● 7G17B/D:Compact size using flat wire,low resistance and High current ● AEC-Q200 compliant spec available upon request ● Operating temperature : -40℃~ +125℃ (The self-heating is included)
特 長 ●放射ノイズを防ぐ閉磁路構造
●ホームシアター・AVアンプなどの大電力用に最適
● 7G17A/C:無酸素銅線使用し、高音質を実現
● 7G17B/D:平角線使用、低抵抗、大電流
●AEC-Q200対応可能
●使用温度範囲-40℃~+125℃(自己発熱を含む)
9 5
http://www.sagami-elec.co.jp
Power Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:10~33µHTemperature Coefficient:±10%max.
Coil Selection Guide
■ 7G23A
Characteristics of DC Limit Current
0
10
20
30
40
0.0 10.0 20.0 30.0 40.0 50.0DC Current (A)
Indu
ctan
ce (μ
H) )
7G23A-100M
7G23A-220M
7G23A-330M
23.0 max.
1.5 max.
3.5
φ1.
2
23.0
20.0
15.5
10.5 φ1.0
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Measurement Frequency for Inductance : 100kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
■ 7G23B
Fixed
S
FCONNECTION
(BOTTOM VIEW)
Code (μH) 7G23A 7G23B 7G23A 7G23B
100 10 9.6 8.1 8.3 6.7 37.8 31.5 9.4 9.1
120 12 - - 8.3 6.7 - 26.0 - 9.1
150 15 - - 9.1 7.3 - 23.5 - 8.7
180 18 - - 8.3 6.7 - 17.5 - 9.1
220 22 9.6 8.1 9.1 7.3 18.5 16.5 9.4 8.7
330 33 9.6 8.1 - - 10.4 - 9.4 -
7G23A 7G23B
±20% (M)
DC Res istance
直流抵抗 (mΩ)DC saturation
al lowable current
直流重畳許容電流
(A)
Temperature rise
allowable current
温度上昇許容電流
(A)
Inductance
インダク タンス
max . - typical
Frequency Range:~1MHzInductance Range:10~22µHTemperature Coefficient:±10%max.
FixedS
F
CONNECTION
(BOTTOM VIEW)
φ1.05.0
23.0
14.5 23.0 max
15.5
1.5 max.
3.5
φ1.
2
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M1007G23A
特 長●低損失コア材採用により、高出力、高音質
(無酸素銅線仕様に対応)
●低抵抗、大電流
●放射ノイズを防ぐ磁気構造
Features● Realized high power and high quality sound using low loss material. (Available OFC wire)● High current, low resistance● Low radiation noise by magnetically shielded structure.
Characteristics of DC Limited Current
02468
101214161820222426
0 5 10 15 20 25 30 35 40 45 50
DC Current (A)
Indu
ctan
ce (μ
H)
7G23B-220M
7G23B-180M
7G23B-150M
7G23B-120M
7G23B-100M
9 6 Power Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:10~22µHTemperature Coefficient:±10%max.
■ 7G31A
Fixed
S
FCONNECTION
(BOTTOM VIEW)
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M2207G31A
31.0
19.0 33.0 max.
22.0
1.5 max.
4.5
7.5
φ1.
6
φ1.0
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Coil Selection Guide
特 長●低損失コア材採用により、 高出力、高音質
●低抵抗、大電流
●放射ノイズを防ぐ磁気構造
Features● Realized high power and high quality sound using low loss material.● High current, low resistance● Low radiation noise by magnetically shielded structure.
Measurement Frequency for Inductance : 100kHzDC saturation allowable current : Inductance drift is within -25% at
the superposition.Temperature rise allowable current : A rise in temperature of core
surface is within 40℃.
Code (μH)
100 10 6.3 5.2 50 m in. 12.5120 12 6.3 5.2 50 m in. 12.5150 15 6.9 5.8 47.0 12.0180 18 6.3 5.2 34.0 12.5220 22 6.9 5.8 31.0 12.0
Inductance
インダクタンス
±20% (M)
DC saturation
allowable current
直流重畳許容電流
(A)
Temperature rise
allowable current
温度上昇許容電流
(A)
DC Resistance
直流抵抗 (mΩ)
max. - typical
Characteristics of DC Superposition
0
2
4
6
8
10
12
14
16
18
20
22
24
26
0 5 10 15 20 25 30 35 40 45 50
DC Current (A)
Indu
ctan
ce (μ
H)
7G31A-220M
7G31A-180M
7G31A-150M
7G31A-120M
7G31A-100M
9 7
http://www.sagami-elec.co.jp
Code (μH)
100 10 10.0 7.5 6.0 6.8150 15 10.0 7.5 4.0 6.8
Inductanceインダクタンス
±20% (M)
DC saturationallowable current
直流重畳許容電流(A)
Temperature riseallowable current
温度上昇許容電流(A)
DC Resistance直流抵抗 (mΩ)
max. - typical
Measurement Frequency for Inductance: 100kHzDC saturation allowable current : Inductance drift is within -25% at
the superposition.Temperature rise allowable current : A rise in temperature of core
surface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Coil Selection Guide
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M100DVL1315H
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Features● Space reduction is realized by 2 in 1 structure● Realized high quality sound using low loss material.● Low radiation noise by magnetically shielded structure.● High current, low resistance using flat wire
特 長●2 in 1 構造による省スペース化を実現
●低損失コア材採用の高音質
●放射ノイズを防ぐ磁気構造
●平角線を使用し、低抵抗、大電流
Fixed
Characteristics of DC superposition
02468
1012141618
0 2 4 6 8 10
DC Current (A)
IND
UC
TAN
CE
(μH
)_
DVL1315H-100M
DVL1315H-150M
9 8
■ 7W14A ■ 7W14BPower Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:10~22µHTemperature Coefficient:±10%max.
Frequency Range:~1MHzInductance Range:10µHTemperature Coefficient:±10%max.
S
F S
F
CONNECTION(BOTTOM VIEW)
S
F
S
F
CONNECTION(BOTTOM VIEW)
Coil Selection Guide
Measurement Frequency for Inductance: 1kHz (100kHz for 7W14B)
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Parts Code 品番コード例
Inductance Code インダクタンスコード
Tolerance 許容差
Type タイプ
M1007W14A
14.0
15.5 16.0 max 4.5
8.5
11.8
1.5 max
φD
D
φ0.810uH
15~22uH
Inductance
φ0.7
Features● Space reduction is realized by 2 in 1 structure● Realized high quality sound using low loss material. (Available OFC wire)● Low radiation noise by magnetically shielded structure.● High current, low resistance● AEC-Q200 compliant spec available upon request● Operating temperature : -40℃~ +125℃ (The self-heating is included)
特 長●2 in 1 構造による省スペース化を実現
●低損失コア材採用の高音質(無酸素銅線仕様に対応)
●放射ノイズを防ぐ磁気構造
●低抵抗、大電流
●AEC-Q200対応可能
●使用温度範囲-40℃~+125℃(自己発熱を含む)
Fixed Fixed
9 9
http://www.sagami-elec.co.jp
■ 7W15B
Power Inductors for Digital Amplifier
Frequency Range:~1MHzInductance Range:10~22µHTemperature Coefficient:±10%max.
Measurement Frequency for Inductance: 100kHz
DC saturation allowable current : Inductance drift is within -25% atthe superposition.
Temperature rise allowable current : A rise in temperature of coresurface is within 40℃.
インダクタンス測定周波数:100kHz
直流重畳許容電流は、インダクタンス変化率-25%以内の直流電流値。
温度上昇許容電流は、コアの表面温度上昇が40℃以下の直流電流値。
Coil Selection Guide
Features● Space reduction is realized by 2 in 1 structure● Realized high quality sound using low loss material. (Available OFC wire)● Low radiation noise by magnetically shielded structure.● High current, low resistance
記事:特性グラフは各タイプの代表値を基に作成しています。 規格値ではありません。 Notes: Graphs are based on typical values of each type, not spec. values.
Fixed
Features● Space reduction is realized by 4 in 1 structure● Realized high quality sound using low loss material.● Low radiation noise by magnetically shielded structure.● High current, low resistance using flat wire● AEC-Q200 compliant spec available upon request● Operating temperature : -40℃~ +125℃ (The self-heating is included)