2018 Winter Flyer Pricing valid from January 1 to March 31, 2018 Canadians Supporting Canadians Distributed by: The Staff & Management of Sowa Tool & Machine extend our warmest wishes to All for a Safe and Prosperous 2018 • With 2 dial gauges (1" for vertical and 2" table travel) • Large 12" x 3" t-slot stage with 6" horizontal and 2-1/2" vertical travel • 12" diameter protractor screen • Rotatable screen with fine adjustment • Selectable high and low intensity profile illumination switch • Vernier resolution of 5 minutes • Overlay clips • Digital indicator and V-Blocks are not included 12” Optical Comparator Vertical Profile Projector Code No.: 7641010 $9,382.00 $18,213.10 Value $2,914.00 Code No.: 7641090 $4,206.20 Value • Direct imaging • Stage size: 340 x 152mm • Glass table: 196 x 96mm • Projector Screen: 12”, usable range >300mm • Objective lens: 10X • Dimensions: 770 x 550 x 1100mm • 130kgs • Designed to provide excellent quality images with accurate magnification • The error of the contour measuring is under 0.08% deviation • Convenient foot switch transfers the coordinate data to the data processing system LIMITED QUANTITIES
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
2018 Winter FlyerPricing valid from January 1 to March 31, 2018
Canadians Supporting Canadians
Distributed by:
The Staff & Management ofSowa Tool & Machine extend our
warmest wishes to All for aSafe and Prosperous 2018
• With 2 dial gauges (1" for vertical and 2" table travel)• Large 12" x 3" t-slot stage with 6" horizontal and2-1/2" vertical travel
• 12" diameter protractor screen• Rotatable screen with fine adjustment• Selectable high and low intensity profile illuminationswitch
• Vernier resolution of 5 minutes• Overlay clips• Digital indicator and V-Blocks are not included
12” Optical Comparator
Vertical Profile Projector
Code No.: 7641010
$9,382.00$18,213.10 Value
$2,914.00Code No.: 7641090
$4,206.20 Value
• Direct imaging• Stage size: 340 x 152mm• Glass table: 196 x 96mm• Projector Screen: 12”, usable range >300mm• Objective lens: 10X• Dimensions: 770 x 550 x 1100mm• 130kgs
• Designed to provide excellent quality images with accurate magnification
• The error of the contour measuring is under 0.08% deviation
• Convenient foot switch transfers the coordinate data to the data processing system
LIMITED QUA
NTITIES
1-800-265-8221 www.sowatool.com2
Range Accuracy Code No. List $ SALE $0-6”/0-150mm ±.001”/±0.02mm 7307065 107.40 57.500-8”/0-200mm ±.0015”/±0.03mm 7307085 155.00 90.800-12”/0-300mm ±.0015”/±0.03mm 7307125 217.10 124.80
• Resolution .0005" / 0.01mm• Extra large LCD readout• The origin position is retained through the on/off cycle• Inch/Metric conversion
Range Accuracy Code No. List $ SALE $0-1”/0-25mm ±.0001”/.002mm 7105015 217.70 130.40
• Dual Ratchet combines both the Ratchet Stop and Friction Thimble
• Protection level IP65• Upon switch-on the display will read the actual absolute measuring position
• Automatic On/Off to maximize battery life• Inch/Metric conversion• Absolute or incremental measuring modes• Carbide tipped measuring faces
Dial Range Accuracy Code No. List $ SALE $ 0-.15” ±.0002” 7469008 291.40 161.35
• Graduation .0005" / 0.01mm• Provides a simplified method of centering a work piece or fixture on horizontalfor vertical machines, internal or external diameters. Face of indicator remainsstationary in any desired position while the machine spindle rotates, leaving theoperator with both hands free to accurately position the machine table
• Shank Dia.: Ø3⁄8" / Ø10mm• Operating speed not to exceed 800rpm• RangeInternal: 5⁄32" - 12"/ 4 - 300mmExternal: Up to 12"/ 300mm
Granite Surface PlateCompressive Strength 7329 lbs. / in2Water Absorptivity 0.13%• 24” x 36” x 4” No Ledge• Grade B - Tool Room• 475 lbsCode# 255-140Reg. List $611.10
Noga DG1003 Magnetic Base• 11” reach• Noga central locking mechanism andNoga designed spring loaded bearing
• Powerful (80kgf) On/Off magnetic baseCode# 165-350Reg. List $212.80
Asimeto Dial Test Indicator• Graduation: .0005”• Range: .03”• Dial Reading: 0-15-0• Accuracy: ±.0005”• Horizontal style• Jeweled bearings• Easy to read yellow face• 3/8” and 8mm dovetail stems includedCode# 7501733Reg. List $119.60
$332.40 Value$1,339.50 Value
Made in Israel
Noga Magnetic Base & Dial Test Indicator Set
Digital Calipers IP65 Digital Outside Micrometer w/ SPC Output
PRECISION TOOLS
Centering Indicator
18” Height Gauge & Surface Plate Combo
31-800-265-8221 www.sowatool.com
Features:• Covered rack• Accurate to .001 per 6"• Made of Stainless Steel• Clamp for repetitive setting• Deluxe case• .100" Revolution
Range Resolution Code No. SALE $ 0-12 .001 200-586 97.93
• Unit will sound at the same timewhen the red lamp lights up
• Accuracy: within 0.005 mm
Model Shank Dia. Point Dia. Type Code No. SALE $VPS-20B 20mm 10mm UM-5# 337-960 134.89VPS-3/4B 3/4” 10mm UM-5# 337-962 141.89
• Matched pairs• Made of high grade steel alloy• Hardened and ground• Tolerance ± 0.0003"
Model Dimensions No. per Pair Code No. SALE $ DK 32-045 3/16 x 1 x 6, 3/16 x 1-1/4 x 6, 230-850 70.25
3/16 x 1-1/2 x 6, 3/16 x 1-3/4 x 6 DK 32-050 1/2 x 1 x 6, 1/2 x 1-1/4 x 6, 230-855 78.50
1/2 x 1-1/2 x 6, 1/2 x 1-3/4 x 6 DK 32-064 1/4 x 3/4 x 6, 1/4 x 7/8 x 6, 1/4 x 1 x 6, 230-857 128.90
1/4 x 1-1/8 x 6, 1/4 x 1-3/8 x 6, 1/4 x 1-1/2 x 6,1/4 x 1-5/8 x 6, 1/4 x 1-3/4 x 6
DK 32-073 1/2 x 7/8 x 6, 1/2 x 1 x 6, 1/2 x 1-1/8 x 6, 230-860 124.901/2 x 1-1/4 x 6, 1/2 x 1-3/8 x 6, 1/2 x 1-5/8 x 6,1/2 x 1-3/4 x 6
• Base and scriber hardened• Bottom grooved for cylindrical work• Front recessed for depressing spindle below base level• Has fine adjustment• Base has 2 retractable gauge pins to set againstedge of a surface plate
Description. Code No. SALE $4" and 7" spindles (1 of each) 200-840 31.43
9" and 12" spindles (1 of each) 200-845 27.37
12” Dial Caliper
Touch Point Sensor (With Beeper)
Bevel Edge Square
Precision Parallel Sets
Steel Square
• Accuracy Class H• Hardened steel squares• Accurate right angles both inside and outside• Blades are beveled on both edges of each side• Made from a single piece of fully seasoned tool steel• Beams and blades are ground and accurately lappedfor straightness and parallelism
Blade Size (in.) Beam Code No. SALE $
7-7/8 5 230-360 37.00
Description Code No. SALE $STM Pen Scriber c/w carbide point 201-060 4.27Replacement carbide point 201-065 1.47
Inch Metric Size Size Squareness Style Code No. SALE $General Type 6” x 4” 150 x 100mm 00 Bevel 7639240 46.30
Features:• Made of precision groundhardened Stainless Steel
Surface Gauges
Scribers With Magnet
Outside Micrometer Set
• Ratchet and lock nut• Complete with standards (2" and up)• Carbide faces• Fitted wood case• Range: 0-3” • Graduation: .0001”
Code No.: 200-578
$94.00
PRECISION TOOLS
1-800-265-8221 www.sowatool.com4
Features:• For easily and quickly cleaning spindle holes.• Plastic body, the taper wiper is made of special cotton materialtherefore not damaging the spindle.
• The BT & DIN tapers are the same.
Model Taper Total Length Code No. SALE $ VTW-40 #40 159mm 326-215 29.44 VTW-50 #50 265mm 326-220 42.88
1” Extended Die Grinder - TP-1102H 1/4” 90º Die Grinder Kit (with Throttle Lever)
Spindle Taper Wipers
U/N Work Stopper - Toothed
Air Micro Die Grinder
Specifications• Air Inlet (N.P.T.): 1/4”• Air Consumption (Loading): 13 cfm• Exhaust System: Rear• Aluminum Alloy Housing
Features:• Water proof lighting head with reinforcedglass resists large temperature fluctuations of cutting oil.
• 110 voltage
T-Slot Stop Pin Arm Model Size Length Height Length Code No. SALE $VWS-125 16mm 160mm 200mm 132mm 326-445 218.46
• Locking lever can be rotated a full 360º
• Arm made of anodized aluminum
• Steel hinge pins• Slip adjustment of the stop pinbefore it is locked into placeArm Length Base Width Weight
Model No. (mm) (mm) (kgs.) Code No. SALE $ VHL-400L 400 x 400 79 3.8 326-335 197.10 VHL-400S - 60 2.8 326-345 153.83 VHL-500L 400 x 400 79 4 326-350 197.10 VHL-500M 220 x 220 79 3.8 326-355 197.10
Granite Surface Plates
Ship Size Thickness Weight (±) Code No. SALE $ Grade B-Tool Room- No Ledge
18” x 24” 4” 189 lb .00015” 255-110 280.42Grade A-Inspection
18”x 24” 3” 145 lb .000075” 255-135 202.93
These plates are made of the highest quality – True Black – Fine Grained – Non-porous – Jewel Hardness – Granite available to give years of longlasting service.
• An exclusive formulation that isextremely effective for the cleaningand care of granite surface plates• Works quickly and effectively,leaves no residue on the granite.
• Steel plate covered with Zinc.• Drawer material: GPS
VA6-212H
Model Width Depth Height No. (mm) (mm) (mm) Drawers Code No. SALE $ VA7-324P 440 222 642 24 326-538 339.15
TR100 EDM Broken Tap Remover
Flexible Magnetic Pick-Up Tool• 21” in length• 12 lb capacity
Model Code No. SALE $ VCC-20 230-640 31.64
Model Length Code No. SALE $ SP2500 400mm 165-488 27.63 SP2550 600mm 165-490 31.28
For removing chips and clean the chip trays on your machines.Black finished steel hooks.The Chip Hooks include a plastic protective guard.NogaGrip Handle designed for maximum comfort in your hand.
• Eliminate multi-step drilling• Lower cost per hole• Better finishing• More accurate, cleaner holes.• Longer tool life• 3/4” shank dia. with two flats• Cutters are interchangeable with other standard hole cutting systems.
HSS Annular Cutters - Inch 5pc Nahanni Variable Helix Carbide End Mill Set
Features:Powerful & economic milling tool with double clamping and 3 corner-use insert.
• Revolutionary design of the cutter and the special cutting edgeof the insert make superb feed rate possible when compared with conventional tools. (Max. fz=0.138ipt)
• Low-cutting-resistance chip breaker achieves excellent cuttingperformance and longer tool life.
• HFP can cover various applications due to HFP insert sizes08,10,13 and 15 line up.
Made in South Korea
HFPC High Feed Face Mill Kits
153-005HPROMO CODE:
List: $297.30
Set Includes:
• 4 Flute• Small corner radius for added strength andsmoother cutting action
• AlTiN coated for improved tool life andincreased production output
Pieces Shank Size per Set Code No. SALE $ 3⁄4 12 140-950 82.28
These bars are made of extra heavy construction ensuring that more steel is behind the cutting facefor chatter-free and heavier cuts.• Extra heavy construction - 100% longer tool life• All shanks ground to +.0" - .0010"• Designed so that the same bar can bore flatbottomed holes or face
Pieces Description Per Set Code No. SALE $ 1/16” - 1/2” x 64ths Fractional Set 29 127-050 126.84
A stronger self repairing coating leading to longertool life compared to TiN coating. TiAlN Tip also allows increased speeds and feeds.
HSS 30ºTiAlN TipJOBBERSLENGTH118º
Split Point
Carbide Tipped Boring Bar Set - C6 HSS TiAlN Tip Jobber Length Drill Set
$669.00
$68.50
Code No. 500-747Reg List $1,013.90
215pc TiAlN TIP DRILL SETWITH DISPLAY CASE
• Labeled for inch drills• 1/16” - 1/2” by 64ths• Metal construction• Lockable
Made in South Africa
These Premium HSS drills can be used in a variety of applications.Their surface treatment increases abrasion resistance, which reduces the amount of chip welding and improves chip flow.• A stronger self repairing coating leading to longer tool life compared to TiN coating
• 50% more holes drilled compared to TiN tip, 200% more holes compared to bright finish
• 118º split point
Complete speeds and feeds availableAsk for your copy of theTiAlN Tip Drill Brochure (STT216C)or download it fromwww.sowatool.com
For drilling in High Alloy materials & exoticmaterials, T15 may also be used in generalpurpose applications where increased speedsand enhanced wear resistance is required.
Keyless chucks are engineered to quickly loosen and tighten a tool onthe chuck collar of the drill, either by manual operation or when torqueis applied. Rotating the chuck collar in a counterclockwise directionwill loosen the tool.• High precision, premium tolerance• The jaws feature a TIN coated surface treatment to assure durability.
Taper Hand System (in.) (in.) Code No. SALE $ 40 3/8” - 3/4” 2 2.323 2.874 531-614 645.05
SYNCHROLIZE TAPPING SYSTEM FOR RIGID TAPPING
• Slim nose Design• Up to 200% increase in tap life
Slim Nose Design
Designed forPERFECT hole alignment
• See page G28 of our catalogue for ER25 tap collets
Tap Collet NoseSystem Range Style Length Dia. Code No. SALE $ 2 3/8” - 3/4” ER25 28mm 42mm 338-122 313.04
• Opposing set screws to secure tap• Designed for perfect hole alignment
Benefits• Higher quality threads• No tapped holes out of tolerance• Increased tool life• Less time spent changing tools• Less time spent inspecting• Adapters make tap changes fast and easy. Change taps in spindle without presetting equipment• Up to 9” of gauge length can be obtained when using the extension system
CAT Taper Synchrolize Tap Chuck Synchrolize Quick Change Tap Adapter
0.039” Tension Stroke0.008” Compression Stroke
De s i g n e d f o r t o d a y ’s h i g h p e r f o rman c e ma c h i n e r y
• See page G80-G81of our catalogue for more about the Synchrolize Tapping System
Case Hardened and ground shankand shaft
Positioning pin with automatic release
Modular antirotation group
Angular contact preloadedball bearings of precisionclass ABE 7/9
Gleason ground spiral bevelgears for maximum performanceand minimum vibration
Graduated ring
Output- ER Collet (Standard)- Weldon- Shell mill holder- Special
Design
The compact design, along with mentionedspecifications allows for the highestperformances, high speeds and long tool life
Standard 10Bar coolantthrough pin
Treated steel head bodywith 360º position andinternal air pressure, maximum rigidity and corrosion resistant. Minimum thermal expansion
Download your copy today
Do you have a question on aspecial application?
Need a Quote?Contact our customer servicerepresentatives - From Mon-Fri,
7:30am to 6:00pm
111-800-265-8221 www.sowatool.com
WORKHOLDING
Code No.: 604-336
Vacmagic® VM300
Workholding Specialists
The All-in-One Pallet Changer and Vacuum SystemIn a relatively short amount of time the VM300 has established itself as the vacuum system to which all others are measured. Capabilities include traditional vacuum applications using ourstandard vacuum pallet and custom vacuum applications (ie. machining blank pallet to suit specific part geometry) and theability to perform as a rock solid pallet changer.
• Simple design keeps cost low• Quick-change - swap pallets in 30 seconds or less• Productivity maximized - load pallets while machining• Easy to install and set-up• Precise repeatability• Reliable and easy to use - virtually maintenance free • Flexible pallet design - limited only by your imagination!• No pumps - uses standard shop air
We reserve the right to make changes without notice and accept no liabilities for mistakes and printing errors. All taxes extra.
100% Forged ConstructionCertified Balanced up to 30,000 r.p.m. (with Nut on Holder)DIN Coolant Thru The Flange - StandardTraverse Ground Throughout
2 Coolant Options Standard
Note: You can see the compression of the steel core of the tool holder during the forging process= Strongest holder on the market
FACTS ABOUT HOLDERS
• DIN Coolant through the flange option standard (Most competitors Standard Holders do not offer this - you need to orderthis as a special feature which is more expensive than GS standard holders)• AT3 or better taper accuracy• Material: Low Carbon Chromium-Molybdenum Alloy Steel - SCM415 hardened to HRC 58-60• Maximum TIR 0.0002” O.D. to I.D.• Each holder balanced with Haimer machine• Each holder comes with a certificate of inspection lab reportEnd Mill Holders Taper/RPM• BT30 End Mill Holders balanced to 20,000 rpm• CAT/BT40 & HSK63 End Mill Holders Balanced to 30,000 rpm- (Competitors - 15,000 to 25,000 rpm)
• CAT/BT50 & HSK100 End Mill Holders balanced to 25,000 rpmShrink Fit Holders (Balanceable) -RPM• BT30 balanced to 20,000 rpm• CAT/BT40 & HSK63 balanced to 30,000 rpm• CAT50 & HSK100 balanced to 25,000 rpmCollet Chucks Taper/RPM• Balanced with Nut on Chuck• ER Chucks 30-20,000, 40-30,000, 50-25,000• SA Collet Chucks 30/40-20,000, 50-15,000• TG Single Angle Collet Chucks 30/40-20,000, 50-15,000• DA Collet Chucks 30/40-20,000, 50-15,000