This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Electronic price list updated with release 184.A (U.S.) and148.A (Canada), dated October 17, 2016.
Transitional products in this specification guide are maintainedfor existing customers only and are likely to be phased out overtime. These products are indicated with a S. Products that arescheduled to be culled are indicated with an G, followed by thelast order entry date.
For Canadian PricingCandian factor can be found atsteelcase.com/CADpricing.Calculate in the following order to avoid rounding errors:• Multiply the base price and each option by the Canadian factor.• Round each to the nearest dollar.
This specification guide is published for domestic use only. Forexport pricing and information concerning the shipment ofCoalesse products outside North America, please contact CustomerService. Prices and data subject to change without notice and areshown in U.S. dollars.
Showrooms
Chicago, IL222 Merchandise Mart, Suite 1032Chicago, IL 60654TEL 312.467.1783
Grand Rapids, MI901 44th Street SEGrand Rapids, MI 49508TEL 616.246.4000
New York, NY4 Columbus Circle, 7th FloorNew York, NY 10019TEL 212.445.8989
Los Angeles, CA1217 2nd StreetSanta Monica, CA 90401TEL 310.633.2200
Shipping and StorageCoalesse reserves the right toselect carrier and packagingmethod. Partial shipments maybe delivered. Coalesse is notliable for delays or deliveryfailure due to strikes, lockouts,labor, or transportation diffi-culties, failure or delay of sup-ply sources, accidents, fire,acts of God, or any othercause of like or unlike naturebeyond Coalesse’s control.Coalesse may transfer mer-chandise to storage if notaccepted when shipmentscheduled. Transfer and stor-age charges will be the cus-tomer’s expense. Coalesse’sinvoice is payable upon trans-fer. If transfer is made prior toconfirmed shipping date, stor-age expenses will be borne bycustomer.
Shipping charges MAY be calculated per order. Leadtimes vary by product.Coalesse reserves the right toselect carrier. Partial ship-ments may be delivered.Coalesse will make everyeffort to provide current andaccurate lead time informa-tion, however, Coalesse is notliable for delays or deliveryfailure due to strikes, lock-outs, labor, or transportationdifficulties, failure or delay ofsupply sources, accidents,fire, acts of God, or any othercause of like or unlike naturebeyond Coalesse’s control.
Freight is included on domesti-cally manufactured productswithin the 48 contiguous statesof the United States and stan-dard freight service of CarlHansen & Son and Emu.
ClaimsMerchandise shipped fromCoalesse is thoroughlyinspected and properly packedbefore leaving the factory.Responsibility of its safe deliv-ery is assumed by the carrierat the time of shipment.Customer must match thefreight delivered with the bill oflading. Customer must exam-ine packaging material upondelivery and note any damageon the carrier bill of lading. Ifthere is damage to the packag-ing material, inspect the furni-ture immediately. If concealeddamage is found, contact thecarrier within 10 days of deliv-ery date. Save all packagingmaterials until after inspection.
Freight damage and claimsmust be reported by the pur-chaser to the carrier. Coalesseis not responsible for freightclaims. Claims for loss or dam-age must not be deducted fromour invoice, nor payment with-held awaiting adjustment ofsuch claims. Do not return anymerchandise to Coalesse with-out a Return Authorizationnumber. By following theseprocedures carefully, Coalesseguarantees our full support ofyour claims to protect youagainst loss or damages. Allclaims against Coalesse fordefects, errors or shortagesmust be made by customer inwriting within ten (10) daysafter delivery. Failure to makeclaims within ten (10) daysconstitutes acceptance of mer-chandise and waives claims.Cutting of textiles deemsacceptance of yardage andwaives all defects, errors, andshortages. Coalesse is notliable for subsequent damages.
How to OrderCoalesse furniture is availablethrough authorized dealers and retailers. Select productsare available for order fromour web site. The authorizeddealer can help you witheverything from surface material selection and orderplacement, to specializedservices, such as space plan-ning and design, delivery andinstallation. Best of all, theyare part of your local commu-nity, providing expert advicewith a thorough understand-ing of local needs. For more information and a listing ofdealers and retailers, visitwww.coalesse.com or call 1.800.627.6770.
Coalesse reserves the right tolimit distribution of any or allmodels.
Credit, Prices, and TermsCredit may be established uponacceptance of satisfactory ref-erences. For payment terms,contact Coalesse’s CreditDepartment. Coalesse maycancel or change credit termsat its discretion and mayrequest advance payment atany time.
The order confirmation will bedeemed by the customer andby Coalesse, as the finalexpression of agreement andwill be deemed the exclusivestatement of terms. The orderconfirmation supersedes allprior writings and may not bemodified or rescinded, exceptby a revised Coalesse orderconfirmation signed by thecustomer. No changes arebinding on Coalesse until deliv-ery of the order confirmation.Any storage charges and appli-cable sales taxes are in addi-tion to the prices shown formerchandise. Inside delivery,uncartoning and installationare customer’s responsibilityunless separately quoted. Alllist pricing shown includesfreight prepaid to one destina-tion for delivery in the 48 con-tiguous United States. Hawaiiand Alaska are not included.We reserve the right toincrease prices without noticedue to increases in labor andmaterial costs. If timely pay-ment is not made, customer isliable for reasonable collectioncosts, including attorney’sfees.
Special/CustomProductsCoalesse prides itself on beingresponsive to our customer’sneeds. Contact our CustomerService team at 1.800.627.6770to discuss a special opportu-nity. Due to product modifica-tions and engineering time,special orders may not be can-celled. Charges will apply.
FOR MORE INFORMATION (onordering our products)Please contact CoalesseCustomer Service at:1.800.627.6770 .
Coalesse Seating/Occasional Tables Specification Guide cOrdering and Warranty, continued 3
Steelcase October 2016
Reserved Fabric PolicyPrior to order receipt, reserving textiles (COM/COL,Maharam, Designtex, andselect Luna Graded-In) is theresponsibility of the dealer.Coalesse cannot reserve textiles based on projectedorders. Coalesse cannot guar-antee Maharam or Designtexfabric availability. If dealerreserves Maharam orDesigntex textiles, Coalessewill require the reserve num-ber and zip code for locatingpurposes when ordering.
Schedule EnhancementsCoalesse will entertain sched-ule enhancements on a case-by-case basis; however, pleaseunderstand that we mustreceive complete informationsuch as installation date, open-ing date etc...to make informedscheduling decisions.
No order move-ups or move-outs are allowed on any orderthat falls within the 15-workingday period of its manufacturingcompletion date. If it is withinthe 15-working day period,Coalesse will invoice at ship-ment but may offer storageoptions at a charge for manu-factured product.
Order Cancellations/ChangesAll order change/cancellationrequests must be submittedusing the Coalesse orderchange/cancellation requestform. Late changes could jeop-ardize the committed deliveryof an order.
Coalesse Rapid10 programs no change or cancellationsallowed.
Coalesse Products:• No charges will be assessedfor change or cancellation 14or more calendar days prior tothe manufacturing completiondate (excludes holidays and/orlarge quantity project sizeorders). For import products,charges may apply.
• No manufacturing changesare allowed 0-13 calendar daysprior to the manufacturingcompletion date. Simplechanges including shippingaddress changes are subject toapproval but will be accommo-dated when possible.
• No cancellations or productchanges will be accepted forquick ship or special/customproduct orders including spe-cial laminates. A cancellationfee will be applicable for anycustom product and/or changemay jeopardize lead time.
• If COM/COL has beenreceived at time of change orcancellation, it is the dealer’sresponsibility to advise dispo-sition or return of materials.Coalesse will not store materi-als after 30 days.
Additional Charges• Changes or cancellationsthat involve any of the follow-ing may be subject to a chargeearlier and/or greater thanshown above: Special engi-neering product, CSM, pre-ordered components, materialswith extended lead times (e.g.,veneers, special paint, etc.) orlarge quantities of standardmaterials.
• Use our Order Change/Cancellation Request Form forall order changes. It isCoalesse responsibility toaccurately process changeorder requests. It is thedealer’s responsibility to verifythat we have accurately inter-preted your change requestsby checking the acknowledge-ment after the change hasbeen made. If you do not usethe web-based change orderform process and an erroroccurs during our translationwhich cannot be correctedprior to ship, all costs will beshared on a 50/50 basis.Changing ship dates or addingproduct to your order is sub-ject to the availability of manu-facturing capacity.
• Cartoning changes and ship-ping address changes are sub-ject to approval and to achange charge. Please consultyour Customer Service forspecific information pertainingto your order.
WarrantyFor warranty information,please go to http://www.coa-lesse.com/warranty/.
As our understanding of sus-tainability evolves in the con-tract furniture business,Coalesse is being launched onthree important fronts:responsibly harvested woods,better ways of plating metal,and manufacturing for thehighest level of durability. Toensure all new products aresocially responsible, we haveengaged the “cradle-to-cra-dle” design consultancy,MBDC, to advise us and pro-vide third-party analysis of thematerials and processes weuse to create our products. AsCoalesse grows, socialresponsibility will be anessential part of our decision-making, from design to dis-posal. We believe that oursuccess on the environmentalfront will be built on the accu-mulation of a multitude ofsmall steps and the occasionalbig leap. We are starting witha green outlook and we haveevery intention of growinggreener.
WOODS: FSC CERTIFICATION
Our policy with wood sourcedfrom outside North Americaand our approved Europeanpartners is that they must becertified by The ForestryStewardship Council (FSC) toensure these woods havebeen responsibly harvestedfrom sustainable forests, andthat the rights and welfare ofworkers and local communi-ties are being respected.Through an FSC label, woodcan be traced back to its origi-nal source of supply.
Our Geneva, NY manufactur-ing location has chain of custody certification for work-ing with FSC certified woods.
CHROME: A NEW ALTERNA-TIVE TO METAL
Chromed steel is a mainstayof the contract furnitureindustry because it is consid-ered a premium finish withhigh durability. But dependingon the type of chrome pro-cessing used, it can have adetrimental impact on humanand environmental health. Themost common method ofchrome plating uses hexava-lent chrome, a known carcino-gen and considered by MBDCin their color-coded ratingsystem (green, yellow, red), tobe a “hard-red” chemical.There are no health hazardsassociated with chrome onceit has been applied, but thehexavalent chrome electro-plating process can be hazardous.
Is there an alternative?Coalesse is opting for a safermethod of plating and haspartnered with a domesticsupplier who uses only “triva-lent” chrome, a non-carcino-genic form of the metal. Few,if any, metal finishingprocesses are without envi-ronmental challenges, andchrome is no exception.Working with the best technol-ogy currently available, wewill continue to seek new andbetter alternatives.
BUILDING TO LAST
Building longevity into prod-ucts is an important sustain-ability strategy. A chair ortable that lasts for 50 or 100years or more will not have tobe replaced, saving the mate-rials and finishes and embod-ied energy from beingduplicated in another form.Coalesse is quality furnituredesigned to outlast its buyers.We hold up Hans Wegnerdesigns as the model oflongevity—pieces manufac-tured a generation ago are stillprized possessions today. Ourhope is that every piece in ourcollection appreciates in valueover the years, so it will bepassed on.
As the Coalesse collectiongrows, our intention is to liveby the cradle-to-cradle (C2C)philosophy described byMBDC this way: “Instead ofdesigning cradle-to-graveproducts, dumped in landfillsat the end of their ‘life,’ thegoal is create products forcradle-to-cradle cycles,whose materials are perpetu-ally circulated in closed loops.Maintaining materials inclosed loops maximizes mate-rial value without damagingecosystems.” Coalesse hascontracted MBDC to audit thematerials used in the majorityof our existing products, andto advise us as we developnew products. We intend toachieve Cradle to Cradle certi-fication on the highest per-centage of products possible.As Coalesse grows, socialresponsibility will be anessential part of our decision-making, from design to dis-posal. We believe that oursuccess on the environmentalfront will be built on the accu-mulation of a multitude ofsmall steps and the occasionalbig leap. We are starting witha green outlook and we haveevery intention of growinggreener.
SCS CertificationsConsolidated List, as of November, 2009
Guest• Enea (All models)• Last Minute Stool• Lottus• Bindu
SCS Indoor Advantage GoldIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office scenar-ios: California Specification01350 for the open plan andschool classroom scenariosand BIFMA e3-2008 (Credit7.6.1 and 7.62) for the openplan and private office scenar-ios. Registration: SCS-IAQ-01822
Guest - Wood• Capa• Switch Guest• Wrapp
SCS Indoor Advantage GoldIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office scenar-ios: California Specification01350 for the open plan sce-nario and BIFMA e3-2008(Credit 7.6.1 and 7.62) for theopen plan and private officescenarios. Registration: SCS-IAQ-02305
Stack Seating• Kathryn
SCS Indoor AdvantageIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) and BIFMAe3-2008 (Credit 7.6.1 and 7.62)for the open plan and privateoffice scenarios. Registration:SCS-IAQ-01823
Seating Desk and ConferenceSeating• Chord• Bindu
SCS Indoor Advantage GoldIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office scenar-ios: California Specification01350 for the open plan andschool classroom scenariosand BIFMA e3-2008 (Credit7.6.1 and 7.62) for the openplan and private office scenar-ios. Registration: SCS-IAQ-01824
Lounge (Gold)• Astor• Await• Bob• Circa• Coupe• Davos• Evaneau• Joel• Lagunitas• Ripple• Sidewalk (includes mobile)• Swathmore (includes Grande and Grande Mobile)• Switch chair• Switch lounge• Thoughtful• Together
SCS Indoor Advantage GoldIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office scenar-ios: California Specification01350 for the open plan andschool classroom scenariosand BIFMA e3-2008 (Credit7.6.1 and 7.62) for the openplan and private office scenar-ios. Registration: SCS-IAQ-01820
Lounge • Bix• Passerelle• Topo
SCS Indoor Advantage Indoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) and BIFMAe3-2008 (Credit 7.6.1) for theopen plan and private officescenarios. Registration: SCS-IAQ-01820
• Au Lait• Ballet• E-table• Reunion• Train
SCS Indoor AdvantageIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) and BIFMAe3-2008 (Credit 7.6.1) for theprivate office scenario only.Registration: SCS-IAQ-02272
Tables (Excludes Wood orWood Veneer, for laminatesonly):• Au Lait• Ballet• E-table• Reunion• Train
SCS Indoor Advantage Gold Indoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office sce-nario. Also conforms toBIFMA e3-2008 (Credit 7.6.2)for the private office scenarioonly Registration: SCS-IAQ-01844
(Includes all wood optionsexcept wood fronts on storagefor the open plan scenario)Storage Carts, Mobile Easeland Wall MountedMarkerboards, Café Tables,Moped and Stations.
SCS Indoor Advantage Indoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the openplan and private office scenar-ios. Also conforms to BIFMAe3-2008 (Credit 7.6.1) for theopen plan and private officescenario Registration: SCS-IAQ-01844
• Denizen
SCS Indoor AdvantageIndoor Air Quality Certified toSCS-EC10.2-2007Conforms to ANSI/BIFMAFurniture Emissions Standard(M7.1/X7.1-2007) for the privateoffice scenario only andBIFMA e3-2008 (Credit 7.6.1)for the private office scenarioonly. Registration: SCS-IAQ-01842
Casegoods
Systems Furniture...............................................................................................................................................
1999 Best of NeoCon Gold and Most Innovative, IDSA Design of the Decade, IDEA Gold Award, Apex Award, Acclaim Award, Office Insight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Kart
1998 Best of NeoCon Gold and Most Innovative, IDSA Design of the Decade, IDEA Gold Award, Apex Award, Acclaim Award, Office Insight-Most Excellent . .Kart
The Austrian-based EOOS wasfounded in 1995 by MartinBergmann, Harald Gründl, andGernot Bohmann, three gradu-ates of the Academy of AppliedArts in Vienna. The partners col-laborate on all projects, special-izing in the design of furniture,consumer products, and archi-tectural spaces, particularly flag-ship retail stores. Customersinclude celebrated names suchas Armani, Adidas, Moroso,A1/Vodafone, Matteograssi,Walter Knoll, Keilhauer, Duravitand Zumtobel Staff.
EOOS relies heavily on researchand a design process they referto as “poetic analysis.” The part-ners seek words, sentences, orimages that evoke concepts“deeply rooted in mankind.”
Says Martin Bergmann: “Ourwork is not one-dimensional,nor is it based on a directprocess that leads from a spe-cific customer requirement toour design. We actuallyresearch the context of thecustomer’s brand. What is itderived from? How did thebrand myth come about? Whatdoes the brand stand for? Ourapproach frequently enablesus to illuminate a previouslyundiscovered dimension of the customer.”
Jeffrey Bernett - USADavos Chair & Benches
Jeffrey Bernett, who foundedhis renowned Studio B in1995, presented his first col-lection of furniture and acces-sories, entitled “Ideas forProduction,”at the May 1996International ContemporaryFurniture Fair (ICFF) in NewYork City. The designs wonthe Editor’s Award for “BestDecorative Accessories.” Atthe ICFF in May of 2000,Bernett, along with five otherdesigners, was named “BestNew Designer” for work withthe U.S. manufacturer, Dune.
Highly versatile, Bernettworks in interior architecture,furniture, household products,lighting, fashion accessories,graphic design/corporateimage and art direction. He isthe first American designer tobe hired by a number of majorEuropean companies. Recentclients include Authentics,Viccarbe, B&B Italia, Boffi,Cappellini, Dune, EsteéLauder, Hidde/sdb, MichaelKors (LVMH), Ligne Roset, andTroy.
His work has been featured inAbitare, Casa Abitare, DesignDiffusion News, Domus, ElleDecor, House & Garden,Interni, Intramuros,Metropolitan Home, The NewYork Times, Ottagono, and thebooks “50 Products” and “50Beds.”
In 1995, Bernett foundedConsultants for DesignStrategy. In collaboration withNicholas Dodziuk, he consultson custom furnishings and fix-tures for clients such asNorthwest Airlines, MichaelKors, and Samsonite.
Bernett’s explanation of whyhe designs (Interior Designmagazine, December, 2003):“I’m very mechanicallyinclined, which includes anaffinity for and curiosity aboutmachines, industrial process,and materials. I was born withthe benefit of being a goodthree-dimensional thinker, aswell as studying a fair bit ofbusiness at university. Designwas the perfect profession—culture for commerce.”
PearsonLloyd - UKBob and Lox
Tom Lloyd and Luke Pearsonmet while studying atEngland’s Royal College of Artin the early 1990’s. TheLondon-based PearsonLloydstudio was founded in 1997based on their shared desireto combine furniture andproduct design. They work anumber of design disciplines,including furniture, consumerproducts, transport, and thepublic realm.
The designers have writtenthat their “desire is to producecompelling solutions that areintelligent, appropriate andtimeless, and contribute towhat for us, is the still embryonic craft of industrialdesign.”
PearsonLloyd’s work includes:Virgin Atlantic Airway’s UpperClass Suite (2003); a range ofwalk-in showers for IdealStandard (2005); a streetlighting system by Artemidefor The City of Westminster(2004); bus shelters and way-finding system for SheffieldCity (2007); and numerousfurniture projects for WalterKnoll, Bernhardt Design,Kokuyo, Tacchini, andAllermuir. The studio wasselected from over 150 com-panies to be one of four des-ignated product designconsultancies for Transportfor London (TFL) until 2009.
Jean-Marie - Massaud-FranceHoly Day Tables, EmuHeaven, Massaud
In 2000, Jean-Marie Massaudformed Studio Massaud withDaniel Pouzet . Together, theyhave designed the TanabéHouse (Fukuoka, Japan),Renault’s displays at interna-tional motor shows, theModern Object concept store(Colombus, Ohio), the HIP spa(Nice, France), and the brandand architectural image ofLancôme (cosmetics) andPoltrona Frau (furniture)worldwide. Studio Massaud isalso working on a 50,000-seatfootball stadium and two con-dominium towers(Guadalajara, Mexico), luxuryhotel (Paris, France), and acondominium building(Tribeca, New York).
A graduate of Les Ateliers,Ecole Nationale Supérieure deCréation Industrielle,Massaud’s work, while“humanistic,” is rooted in theapplied sciences and clearlyinfluenced by his training asan engineer.
Victor Carrasco, GeneralManager of Viccarbe, says ofMassaud: “His unmistakable“Human Nature Style” hasallowed him to become, in fewyears, one of the top design-ers at international level.
“Who other than Massaud,”says Carrasco, “would be ableto reinterpret Mies Van DerRohe in such an elegant andsophisticated way? Onlysomeone with a special sensi-tivity can develop a landmarkcollection like Holy Day. It isalready a great internationalbestseller and part of thecontemporary history ofdesign.”
Massaud’s furniture designsare displayed in design muse-ums in Amsterdam, Chicago,London, Lisbonne, Paris, andZurich.
One of Europe’s brightestyoung designers, Marc Krusinis veteran of the Milan-basedgroup Codice 31, which hefounded in 1998 with fiveother designers. He nowdirects the design team of theprestigious Milanese designfirm, Piero Lissoni, overseeingprojects for internationalclients such as Alessi, Kartell,Flos, Thonet, and Wella.
Much of Krusin’s own work isdone through Klay, a firm heopened in 2004, specializingin “objects of natural materialsinfluenced by world cultures.”Cross-cultural influences runthroughout his practice.
He has designed for FontanaArte, Liv’it, Pallucco, Saporiti,Bosa ceramiche, Merten,Omnidecor, Glas Italia, and theSpanish furniture firm,Viccarbe. Viccarbe’s GeneralManager, Victor Carrasco,describes Krusin as “a greattalent at a very young age.”
Krusin was recently honoredin the 2008 “Europe 40 Under40,” an annual program co-sponsored by The EuropeanCentre for Architecture ArtDesign and Urban Studies andThe Chicago Athenaeum:Museum of Architecture andDesign. According to the pro-gram directors, Krusin is oneof the “next generation ofinnovative architects anddesigners who will impactfuture living and working envi-ronments, cities, and ruralareas.”
Patricia Urquiola -SpainLast Minute Stool, EmuRetrouvé, and Hosu
Patricia Urquiola began train-ing as a student in architec-ture at Faculdad deArquitectura de Madri beforegraduating in design fromPolitecnico di Milano in 1989,where she studied underAchille Castiglione.
In 1991, as head of the productdevelopment team at DePadova, Urquiola designed herfirst commercial furniturepieces (in collaboration withVico Magistretti). They werehighly imaginative yet func-tionally pragmatic, an appeal-ing combination that hasdefined her work since.
From 1993 to 1996, Urquiolaowned a studio with twofriends, accepting commis-sions in architecture, interiors,showrooms, and restaurants.From 1996 to 2000 she man-aged the design group LissoniAssociati, then opened herown studio in Milan, focusingon product design, displays,and architecture.
Best known for her manydesigns for Moroso, Urquiolahas also worked for DePadova, Agape, B&B, Alessi,Driade, Foscarini, Kartell, Flos,Molteni, and Artelano amongother well-known furniturehouses. She has won numer-ous design awards and issought after as a speaker atconferences and universities.
Hans J. Wegner -DenmarkCarl Hansen & Son
Hans J. Wegner is one of the20th century’s most importantfurniture designers. A leaderof the Danish Modern style,Wegner is revered for hisiconic chairs with theirorganic beauty and amplecomfort. His understanding ofwood joinery was unsur-passed, his views on qualityuncompromising. Wegner balanced form and functionbrilliantly.
Carl Hansen & Son, theDanish furniture maker, beganworking with Wegner in 1949.Among his first designs forthe company were the leg-endary Wishbone Chair (CH24)and several other designs thatare still produced today.
During his long career,Wegner designed more than500 chairs. He almost singu-larly brought the chair out ofits hiding place as “part of afurniture set” and into its ownas modern sculpture. Hebroke new ground by combin-ing natural materials in imagi-native ways, always testingthe limits of craftsmanshipand serial production.
Wegner was demanding anddifficult to satisfy, often takingweeks to get the results hewanted from his craftspeople.But he was also limitlesslycurious, often playful, andalways elegant. “We must takecare,” he said, “that everythingdoesn’t get so dreadfully seri-ous. We must play – but wemust play seriously.”
While Wegner was awardedpractically every honor possi-ble for a furniture designer,and his chairs are featured inmuseums around the world,his design is accessible. Hebelieved that chairs weremade for sitting. Ergonomicsand usability had a central rolein his thinking before thosewords ever entered the mainstream.
Hans J. Wegner died inDenmark in January, 2007.
Brian Kane - USABindu
Brian Kane graduated fromthe University of Bridgeport,Connecticut, in 1970 with aBachelor of Science degree inIndustrial Design. He workedfor several New York Citydesign studios and spent ayear in Milan, Italy, workingfor Architect Silvio Coppola.His projects included thedesign of seating and case-goods for such companies asMobil Italia Spa. and BerniniSpa.
After returning to the U.S., heworked in New York forAtelier International (A.I).Work involved special contractfurniture design projects,showroom design, and thestartup of U.S. production ofItalian designs by Cassina,B&B, and Tecno.
Kane joined the design staff atMetropolitan FurnitureCorporation (Coalesse) inJanuary, 1977. Less thanthree years later, he becameone of four partners assumingownership of the firm, andtook on the responsibilities ofVice President of Design andProduct Development.
In 1987, Metropolitan wasacquired by Steelcase. Forthe next two years, Kanemaintained his position asVice President and wasresponsible for all aspects ofCoalesse’s design, includingproducts, showrooms, andgraphics.
In March of 1989, Kane estab-lished Kane Design Studio inSan Francisco.
Kane’s designs have won over80 design awards and havebeen exhibited at the Whitneyand Brooklyn Museums inNew York and the Museum ofModern Art in San Francisco.
WilliamsSorel - USADenizen
WilliamsSorel is a California-based design studio estab-lished by Otto Williams andJess Sorel in 2007. Prior tolaunching their own firm, Ottoand Jess were the creativeforce behind Coalesse, bySteelcase. Their designs forCoalesse won more than 20awards, most notably for Bix,which defied conventionaloffice furniture categories.During their tenure atCoalesse, Otto and Jessdeveloped a passion and repu-tation for exploring the bound-aries between work and life inan effort to humanize themodern workplace.
The designers have said “weare thinking less about cate-gorizing office furniture andresidential furniture, andthinking more about the expe-riences of working and livingin spaces, and the artifactsyou need to support both nar-ratives simultaneously.There’s really a move to allowfurniture to be furniture again,as opposed to equipment. In a sense, the office is being dismantled.”
Together they hold numerousdesign and utility patents andtheir work has been publishedin Abitare, Azure, Contract,Fast Company, I.D. Magazine,Interior Design, andMetropolis. Otto holds a BFAin Industrial Design fromRhode Island School ofDesign. Jess holds a BFA inIndustrial Design from TheCalifornia College of the Arts.
Scott Wilson & MINIMAL - USASW_1 Collection, Power Pod
In 2007, Scott Wilson foundedChicago-based MINIMAL, astudio whose diverse workspans industries ranging fromtechnology, interaction, andconsumer products to fashion,furniture and environments.A former Global CreativeDirector at Nike, Wilson hasled design organizations suchas IDEO, Thomson ConsumerElectronics, Fortune Brands,and Motorola and createdsome of the most recognizedconsumer design icons.
Currently partnering with topFortune 500 companies suchas Google, Dell, Microsoft,Nike, and Xbox as well asexciting start-ups, MINIMAL isworking on the some of themost anticipated new devicesand experiences in the indus-try. Balancing consulting fordesign-centric brands with hisintense passion for self-man-ufacturing and entrepreneurialventures, Wilson is constantlylooking for the next consumerconnection. In January of2010 he successfully incu-bated, developed, raised fund-ing, and launched a revolu-tionary new customizationplatform brand, Uncommon,which took the existing indus-try giants by surprise.
One of the most respectedhands-on designers in theindustry, Wilson has the elu-sive ability to consistentlydeliver products to market thatspeak rationally and emotion-ally to the consumer, ulti-mately ensuring a higherprobability of market successand endurance.
His work has been exhibitedin museums and competitionsincluding the Cooper-HewittNational Design Triennial,MoMA, MCA, and ChicagoAthenaeum and has been rec-ognized with over 50 interna-tional design awards in thelast decade including IDMagazine’s Top 40,FastCompany’s Master ofDesign, and TIME Magazine’sStyle+Design 100.
Coalesse Seating/Occasional Tables Specification Guide cDesigners, continued 9
Steelcase October 2016
Toan NguyenLagunitas
Toan Nguyen was born inParis in 1969 and graduated inIndustrial Design at ENSCI-LesAteliers in Paris, in 1995.
After experiences in severaldesign studios in Paris,Barcelona, and Milan andnotably ten years of collabora-tion with Antonio Citterio asdesign director and designpartner, signing products formany brands such as Axor-Hansgrohe, B&B Italia, Flos,Fusital, Guzzini, Iittala, Kartell,Metalco, Skantherm,Technogym, or Vitra, ToanNguyen founded his owndesign studio based in Milanin 2008.
Toan Nguyen Studio is a multi-disciplinary Atelier focused ondesign development in manydifferent design fields, fromfurniture to technologicalproducts, in partnership withleading international compa-nies based in Germany, Italy,Spain, Switzerland, and USAsuch as Accademia, Dedon,Fendi Casa, Laufen, Lema,Moroso, Urmet Group,Varaschin, Viccarbe, andWalter Knoll.
The Bellows Collectiondesigned for Walter Knoll haswon a Red Dot Design Awardin 2010 and Antero, designedfor Laufen, has obtained theRed Dot Design Award 2012.
Steven CopelandFree Stand
Steven Copeland is an indus-trial designer known for craft-ing mobility. "I'm looking fornew products that free uppeople's physical aspirationsand enable intuitive expres-sion... constructions that gelwith the amazing human bodyand celebrate agility."
Born in 1960 in Montreal,Copeland's kinetic approach todesign began as a child mak-ing toys and bicycles. Todayhis professional work isdefined by an interactive qual-ity, the way toys are definedby the play they inspire.
With a client list of elite manu-facturers in the U.S. andEurope, Copeland has won several of the industry's topawards and has been widelypublished and exhibited fordesign innovation. Best knowfor a groundbreaking collectionof lighting with Flos, Steelcase,Knoll, and Luxo, Copeland hasbuilt a reputation for creativeproblem-solving that led to collaborations with NASA andM.I.T., and to work with RhodeIsland School of Design and theUniversity of the Arts inPhiladelphia, P.A. He has alsopioneered new levels of performance in computerergonomics and disabledcycling.
Lievore Altherr MolinaEnea Lottus and Montara650
Lievore Altherr Molina wascreated in 1991 by the mergingof its three partners: AlbertoLievore, Jeannette Altherr,and Manel Molina. Since itsfounding, the studio has beendevoted to product design,consulting, and the art direc-tion of various companies,always offering individualizedsolutions.
Throughout the years the stu-dio has been recognized forits furniture design, its interiordesign projects, its products,and packaging. Simulta -neously, the studio has developed an intense teachingpractice, giving seminars, andtraining courses to new pro-fessionals at various Spanishuniversities and other organizations.
The studio has been awardedmany national and interna-tional awards, includingSpain's National Design Awardin 1999. Lievore AltherrMolina has exhibited theirwork in Barcelona, Cologne,Chicago, Stockholm, Helsinki,Lisbon, London, Louisiana,Madrid, Malmö, Milan, NewYork, Paris, and Tokyo. Theirideas and projects are regu-larly published in the mostprestigious design magazinesaround the world.
Coalesse is excited to intro-duce the Enea Lottus collec-tion, designed by LievoreAltherr Molina. The Lottuscollection of stacking chairs,stools, and tables offers asimple, clean aesthetic tomost live/work settings. Easyto store, easy to clean, anduser-friendly, the Enea Lottuscollection is a logical solutionfor any environment.
Astor G10/17DESIGN EDGAR REUTER DESIGN ORIGIN: GERMANY
• Chair - Seat, back, and fully upholstered arms: fabric or leather - Legs: wood - Glides: non-adjustable
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number4 Wood color number for legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.Overall: 34"D 301⁄2"W 32"H
Inside: 20"D 22"W 17"HSeat: 17"HArm: 22"H
Tip: All cushions are loose.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Seat (upholstery selections default for entire unit if B is not selected):
Arms and Back:
Back Cushion:
Base Frame:
$121 list per contrasting fabric specified. List price based on highest fabric grade usage.
A
B
C
DA
B
C
D
B
B
B
B
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse
Await Modular
DESIGN EOOS DESIGN ORIGIN: GERMANY
• Frame: unibody construction with finger-jointed plywood• Multiple densities of polyurethane foam and polyester foam and polyester fiber• Sofa: - Seat and back: fabric or leather - Legs: black high-density polyurethane resin - Glides: non-adjustable• Ottoman: - Seat: fabric or leather - Casters: non-locking
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Contrasting option availableonly on sofas.
Tip: Please include sketch forganging.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Three-seat sofa, four-seat sofa, +$615 Specify with fire code seating. and bench • Ottoman +$237 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
• Bench: fabric or leather• Frame: unibody construction with finger-jointed plywood• Multiple densities of polyurethane foam• Fixed seat• Top and double needle stitching on seams• Legs: black high-density polyurethane resin• Glides
1 Style number2 Fabric or leather color number for upholstery on bench3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Please include sketch forganging.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Surface • Fire code seatingMaterials • One-section connector bench +$237 Specify with fire code seating. • Two-section connector bench +$473 Specify with fire code seating. • Three-section connector bench +$615 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse
Await Tables
DESIGN EOOS DESIGN ORIGIN: GERMANY
d = Available in Rapid10.
• Freestanding table frame: silver • Connector table frame: panels are black, white, or gray• Top: High-Pressure Laminate top with matching 3 mm edge band• Glass top (tablet): - 1⁄2" thick - Radiused edges• Ganging plate: 1⁄4" thick ganging plates attach to the bottom of units to the seating unit plates
1 Style number2 Laminate top and tablets, if selected: 2595 Black 2730 Arctic White 290N North Sea3 Glass color number for top, if selectedcSee Coalesse Surface Materials Reference Guide.
Tip: Await connector tablesare not recommended to beused in end-of-run applications.
Tip: Await connector tablesare not made for ganging toAwait mobile ottoman.
Arms are available on selectseating units. They areupholstered.
Back screen is available onselect units to provide pri-vacy and divide space. It isupholstered.
Legs and base are con-structed with steel tubingand steel plates for struc-tural integrity. They are fin-ished with paint. They areeither inset under the seat-ing unit (sled base) or slantoff the back of a unit (legs).
Sled base on a loungechair is finished with paint.The back of the sled basedoes not extend past thechair back.
Leveling glides adjust forinstallations on unevenfloors. Adjustability range is3⁄4".
Bix offers a system of seatingand tables that can create avariety of lounge-based appli-cations that address group orindividual work needs. Eachapplication provides conven-ient connections to power, voice, and data.
Tablet provides a surfacefor presenter’s notes, laptopcomputer, or wirelessmouse.
Storage drawer is available onselect models to store equip-ment or presentation tools.
Face lock, keyed randomly,is standard on storagedrawers to secure the itemsstored in it.
Projection screen is availableon podium seating for presen-tations and to divide space. Italso accommodates Steelcasehuddleboards.
Actual DimensionscSee page 60
Group meeting area createdwith Bix furniture offers a senseof enclosure without walls forcollaborating and provides socialand physical comfort.
Bolster is upholstered.
Service tray is optional.
Side table offers a freestand-ing mobile tablet surface. It isavailable in vinyl.
Steelcase October 2016
18" seat height is an availableoption on all lounge, sectionalseating, bench, and podiums.This option should not be usedin conjunction with work boothtables. It allows a higher sit forhealthcare applications.
Podium serves as a focal pointfor lounge-based meetingspaces and provides comfort-able seating for the presenter.A lockable storage drawersecures projection equip mentor presentation tools. A fixedtablet arm provides a surfacefor presenter’s notes, laptopcomputer, or wireless mouse.Podium can accom modate aservice tray.
Integrated projection screenis available on select podiumunits for slides or projecteddigital media. It can also beused to divide an open space.The screen is a fine whitemesh that allows light to filterthrough when the screen isused as a space divider. It alsoaccom modates a Steelcasehuddleboard.
Huddleboard
Service tray rests on benchesand podium units for foodservice or to support projec-tion equipment in a lounge-base meeting space.
Multiple fabrics can be speci-fied on lounge, sect ional, andpodium seating units for anadditional fee per specifiedfabric. • Seat cushion and sides of seat cushion - no additional fee• Back cushion and sides of back cushion - additional fee• Back screen (if selected) - no additional fee• Armrest (if selected) - no additional feecSee Bix Multi-Fabric Diagram and Yardage Request Form, pages 73 and 78.Tip: Fabric for the seat and backis specified separate from theback screen, if selected. For amonoch romatic look, specify thesame fabric for both the seat andback and back screen.
30"W corner sectional unitsare available with the two fab-ric direction options for theseat – railroaded or cut-right.Seat fabric direction is deter-mined by its relationship to theback screen or back supportlegs.Tip: Seat fabric on extended cor-ner and straight sections isalways railroaded. cPage 80
Bridge tables integrate with Bix sectional seating to create a range of lounge-based applications and areavailable with two top shapes– rectangular and corner.Translucent screens are avail-able to create a sense of visualprivacy for open space envi-ronments. The work surface isavailable with or without agrommet and an optionalpower, voice, and data module.The rectangular table featuresan integrated 18"W x 121⁄2"Htilted display surface for maga-zines or project folders. Tip: Bridge tables are used withsectional seating. They do notattach to benches or podiums.
Corner bridge tables areoffered in 20" table heightoption to be used with the 18"seat height option only.
Occasional tables are freestanding 18"H tables that can be used a variety oflounge applications. They are available with a round,square, or rectangular top. The tops are available with or without a grommet and anoptional power, voice, and datamodule.
Individual work-booth areaprovides an alternative to aconfined workstation. It offersa semi-private setting for tem-porary tasks that require proj-ects to be spread out. It iscreated by grouping twostraight sectionals or loungechairs with a 27"H work-boothtable. Tip: Extended corner sect ionalsor straight sections with armsshould not be used in a work-booth applic ation because accessto the seating area is obstructed.
Lounge chairs are availablewith or without upholsteredback screens. Models withupholstered arms are alsoavailable.
Sled lounge chairs feature a compact base that isdesigned for small spaces orto be used flush against thewall. They are available with orwithout upholstered arms or atablet arm.
Product Details
Sectional seating is offered incorner, extended corner, andstraight units to provide a vari-ety of configurations. They areoffered with or without backscreens and with or withoutarms. All sections include anintegrated ganging device.Corner sectional units arehanded. Handedness is deter-mined by the location of theback screen or back supportlegs.
Bench provides a backlessseating option. It can also beused as an alternative softoccasional table. An open stor-age space that is accessiblefrom either side is available forstoring magazine and mediaequipment. Bench can accom-modate a service tray.
Coalesse
BixDESIGN METRO DESIGN GROUP
Coalesse Seating/Occasional Tables Specification Guide cBix, continued 57
Lounge Seating
Steelcase October 2016
Bridge tables are availablewith a grommet, factoryinstalled, to allow cords andcables to pass through the top.Wire management clips,attached to the underside ofthe top, are used to routecords and cables. A power,voice, and data module can beinserted in the grommet.
Occasional and work-boothtables are available with a fac-tory-installed grommet locatedover each column and base toallow cords and cables to passthrough the top. A power,voice, and data module can beinserted in each grommet location.
Wiring & Cabling
The worksurface cutout forthe grommet and PVD is 31⁄2"in diameter.
Column and base of occa-sional and work-booth tablesare used to route and concealcords. The cords pass throughthe worksurface down throughthe column and out through amouse hole in the base plate.Bases may be installed withthe mouse hole facing in any of four directions, dependingupon where cords need to exitfor access to power/data/voicein the wall or floor. Cordsshould be routed through theconcealed channels and out the mouse hole during theinstallation of the table base.
Hole at the top of each col-umn allows cords to be routedbetween tables directly belowthe worksurfaces. Wire man-agement clips are included forrouting purposes.
31/2"
18" or 27"
Power, voice, and data mod-ule can be installed in thegrommet locations to bringpower and communication tothe worksurface. Each moduleis equipped with two 110voltelectrical outlets and onesnap-in voice/data moduleinsert consisting of dual CAT 5RJ45 universal T568A/B jacks.It is UL listed and CSA certi-fied. It has a 6' power cord.For additional data/voice outletoptions, please contact MetroCustomer Service at1.800.627.6770.
Hardwired applicationsrequire on-site modificationsby a licensed electrician fol-lowing all local electrical coderequirements. Tip: The base will accom modatea 3⁄8" diameter flex-conduit.
Edge detail is available ineither plastic or wood edge.
Work-booth tables are free-standing 27"H tables that areused with sectional seating tocreate a work-booth configu-ration. They are available witheither a round or rectangulartop. The tops are available withor without a grommet and anoptional power, voice, and datamodule. Base features a lowprofile for foot clearance.
Side table offers a freestand-ing, mobile tablet surface. Thetripod base allows it to bepositioned close to a seatingunit. The top is available invinyl.
Back screen is available onlounge and sectional seating. Itis fully upholstered with a zip-per detail. However, it is notremovable. Back screens mustbe ordered with the chair. Itcannot be retrofitted to anexisting backless lounge chairor seating sections.
Plastic edge Wood edge
Integrated ganging device,included, connects sectionalseating units together in thefield. It is not intended for userreconfiguration.
Bridge tables connect on bothsides between sectional seat-ing units. A rectangular top isused in an in-line configura-tion. A corner top is used in anL-shape configuration.Exception: Bridge tables cannotattach to a seating unit witharms.
Lounge chairs are independ-ent and are not intended toconnect to sectional units orbridge tables. cSee How To Plan, page 62
Storage drawer front• Laminate (standard)• Wood (option), high sheen only• Custom wood finish (option), high sheen only
Integrated storage drawer pull• Paint
Service tray frame• Paint
Bridge, occasional, and work-booth table surface• Laminate with matching 3 mm plastic edge• Wood with matching wood edge• Custom wood finish (option)
Bridge table frame and tilteddisplay surface• Paint
Bridge table screen• Translucent material
Surface Materials Occasional and work-boothtable base• Paint (textured only)
Grommet• Black plastic only
Side table surface and basecover• Bronco onyx vinyl
Side table base• Paint (vinyl)Note: Refer to the CoalesseSurface Materials ReferenceGuide for additional surfacematerials information.
Fire code seating (FCS) mod-ifications are available to meetCAL TB133 requirements.cSee Coalesse Surface MaterialsReference Guide.
Customer’s OwnMaterial/Leather (COM/COL)Program is available. cSee Coalesse Surface MaterialsReference Guide for additionalinformation,Note: Due to unusual upholsteryconditions inherent in the designof Bix, not all seating fabricsmay be specified. Refer tohttp://fabric.coalesse.com/ for alist of pre-approved Designtexfabrics on Bix. Pre-approval isrequired for all COM fabric.Also, due to the geometricshapes and flat planes of the Bixdesign, seat fabric tautness willvary depending upon the amountof stretch in the fabric. Leathernaturally stretches with use.
Configuration guidelines — work settings with podium, benches & bridge tablesA variety of configurations may be created tosupport lounge-based meeting spaces using the Bix podium as a focal point. Benches andbridge tables support media projection equipment.As projection equipment varies, you will need toverify the distance required between the equipmentand projection screen when planning your space.The examples below are suggested layouts.
Coalesse Seating/Occasional Tables Specification Guide cHow to Plan, continued 63
24"-27"
48" 72"
96"-99"
Configuration Examples
Configuration guidelines – work-booths with 27" high tablesTwo straight sections are grouped with 27"high tables to create work-booth applications.Lounge chairs may also be specified with 27" high tables to create a two-person work-booth.Facing seats edges should be spaced 24"–27" apartfrom one another to accommodate leg clearanceand maintain the correct user relationship to theworksurface. The table base is centered within the24"–27" space.
Configuration guidelines – work settings with 18" high tablesA variety of configurations may be created by combining sectional seating and 18"high tables. The Bix system is built upon a 12"/24" dimension module for planning. Seats are 24" wide. Rectangular tables are 24" deep. Tables are spaced 12" from seat edges. A24" opening should be maintained for large 360˚group enclaves.
Configuration guidelines – DON’TS• 30" wide corner sections are not intended to be
freestanding. 30" wide corner sections mustalways be connected to an adjoining 54" wideextended corner or straight section, using theganging hardware provided.
• Individual lounge chairs are independent elementsnot designed as a module within the seating sys-tem. The lounge chair seat is wider than the 24"system module and lounge chairs do not includeganging hardware. Bridge tables also do not con-nect to lounge chairs.
• Do not create a U-shaped configuration with a 27"high rectangular table. Access to the closed end isdifficult and the table edge is too far from reachfor the user.
• Do not use 54" wide extended corner sections orstraight sections with arms to create a work-booth configuration with 27" high tables. Access is obstructed.
• Bridge tables must be connected on both sides to a seating section.
• Bridge tables do not connect to seating sectionswith arms. Seating sections do not gang witharms at the seam.
• Do not attach 30" wide corner sections to a corner bridge table. This application does notallow enough leg room for two users.
• Bridge tables do not attach to benches or podiums.
Orientation & fabric directionCorner units are handed from a facing position.Handedness for 30"W corner units is determined bythe location of the back-screen or back supportlegs. Location of back-screens should be consid-ered for each configuration. In order to create aconsistent pattern across seats in the configuration,
30"W corner units are available with two seat fabricdirection options. Seat fabric direction is deter-mined by its relationship to the back-screen or backsupport legs. Seat and back fabric on 54"Wextended corner and straight sections is alwaysrailroaded.
Examples below assume a striped patterned fabric:
Arrow indicates direction ofthe pattern on the roll
Arrow indicates direction ofthe pattern on the roll
• Seat, back, and arms, if selected: fabric or leather• Legs: paint• Adjustable glides: paint to match legs• Back screen, if selected: fabric• Leveling wrench
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat, back, and arms, if selected4 Paint color number for legs and glides5 Fabric color number for back screen, if selected6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Lounge chair +$237 Specify with fire code seating. • Lounge chair with arms +$309 Specify with fire code seating. • Lounge chair with back screen +$473 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Lounge chair +$ 35 Specify with acrylic backer. • Lounge chair +$ 47 Specify with acrylic backer. with arms • Lounge chair with +$ 57 Specify with acrylic backer. back screen cSee Coalesse Surface Materials Reference Guide.
Tip: Fabric for the seat and backis specified separate from theback screen, if selected. For amono chromatic look, specify thesame fabric for both the seatand back and back screen.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: When specifying fabric in different price grades, thehighest price grade prevails.
Tip: The COM yards and COL square footage listed on this page reflect the requir -ements for a single fabric thatare based on non-directional54"W material applied rail-roaded. For multi-fabric COMrequirements, please refer to Multi-Fabric Yardage.cPage 79
• Seat, back, and arms, if selected: fabric or leather• Base and tablet support, if selected: paint• Glides• Tablet surface: bronco onyx vinyl
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Lounge chair and lounge chair +$237 Specify with fire code seating. with tablet arm • Lounge chair with arms +$309 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Lounge chair and lounge chair +$ 35 Specify with acrylic backer. with tablet arm • Lounge chair with arms +$ 47 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Related • Bench cPage 74Products • Podium cPage 76 • Occasional tables cPage 84 • Side tables cPage 86
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: The COM yards and COL square footage listed on this page reflect the requir -ements for a single fabric thatare based on non-directional54"W material applied rail-roaded. For multi-fabric COMrequirements, please refer to Multi-Fabric Yardage.cPage 79
Tip: When specifying fabric in different price grades, thehighest price grade prevails.
Standard Includes Required to Specify
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat, back, and arms, if selected4 Paint color number for base and tablet, if selected5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Seat, back, and arms, if selected: fabric or leather• Legs: paint • Adjustable glides: paint to match legs• Back screen, if selected: fabric• Leveling wrench
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat, back, and arms, if selected4 Paint color number for legs and glides5 Fabric color number for back screen, if selected6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabric for the seat and backis specified separate from theback screen, if selected. For amonochro matic look, specify thesame fabric for both the seatand back, and back screen.
Tip: The COM yards and COL square footage listed on these pages reflect the requir -ements for a single fabric thatare based on non-directional54"W material applied rail-roaded. For multi-fabric COMrequirements, please refer to Multi-Fabric Yardage.cPage 79
Tip: When specifying fabric indifferent price groups, the high-est price group prevails.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
W D
W D
Tip: 30"W corner sections areavailable with two seat fabricdirection options – railroaded orcut-right. Illustrations assume astriped patterned fabric. cPage 80
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • 30"W sections +$473 Specify with fire code seating. • 48"W, 54"W, and 72"W sections +$615 Specify with fire code seating. • 72"W sections with back screen +$737 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • 30"W sections +$ 47 Specify with acrylic backer. • 30"W sections with back screen +$ 69 Specify with acrylic backer. • 48"W sections +$ 55 Specify with acrylic backer. • 48"W sections with back screen +$ 85 Specify with acrylic backer. • 54"W sections +$ 85 Specify with acrylic backer. • 72"W sections +$ 74 Specify with acrylic backer. • 54"W and 72"W sections with +$ 128 Specify with acrylic backer. back screen cSee Coalesse Surface Materials Reference Guide.
• Seat: fabric or leather• Legs and open storage interior, if selected: paint• Adjustable glides: paint to match legs• Leveling wrench
1 Style number2 Fabric or leather color number for seat3 Paint color number for legs, glides, and open storage interior, if selected4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface Fire code seating Materials • 48"W benches +$473 Specify with fire code seating. • 72"W benches +$615 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
48"W Bench with Open StorageBBS48 $1804 $1804 $1819 $1845 $1923 $1974 $2033 $2074 $2146 $2247 $2004 $2822 $2976
COM/yds = 21⁄4, COL/sq ft = 41
72"W Bench with Open StorageBBS72 $2132 $2132 $2152 $2186 $2290 $2358 $2436 $2490 $2587 $2721 $2348 $3413 $3618
COM/yds = 3, COL/sq ft = 54
Specification Information
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: The COM yards and COLsquare footage listed on thispage reflect the requirementsfor a single fabric that are basedon non-directional 54"W mate-rial applied railroaded.
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Seat and bolster: fabric or leather• Legs, tablet support, drawer pull, and projection screen frame, if selected: paint• Tablet surface: bronco onyx vinyl• Drawer front: laminate• Face-mounted lock, keyed random: black only• Projection screen, if selected: sand color mesh• Adjustable glides: paint to match legs• Leveling wrench
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat and bolster4 Paint color number for legs, glides, tablet support, drawer pull, and projection screen frame, if selected5 Laminate color number for drawer front6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Fire code seating +$615 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
Tip: The COM yards and COL square footage listed on this page reflect the requir -ements for a single fabric thatare based on non-directional54"W material applied rail-roaded. For multi-fabric COMrequirements, please refer to Multi-Fabric Yardage andSquare Footage Require ments.cPage 79
Tip: When specifying fabric indifferent price groups, the high-est price group prevails.
Podium with left tablet BP72TX 31⁄2 21⁄2 N.A. N.A.
Podium with right tablet BP72XT 31⁄2 21⁄2 N.A. N.A.
Podium with projection screen and left tablet BPP72TX 31⁄2 21⁄2 N.A. N.A.
Podium with projection screen and right tablet BPP72XT 31⁄2 21⁄2 N.A. N.A.
*Fabric yardage is based on non-directional/solid fabrics. Use conversion chart below for repeat/printed fabric yardage.
Multi-Fabric Yardage
Non-standard fabric requirementsYardage requirements shown are based on non-directional 54"W material applied railroaded.Coalesse will apply fabric railroaded unlessinstructed otherwise on the dealer’s purchaseorder. The following conversion chart should beused to determine yardage requirements when COMhas a repeat of 2" or more. Please contact CoalesseCustomer Service for a yardage quotation if thefabric is less than 54" wide, has a repeat of morethan 24" , or if the fabric must be cut- right.
CONVERSION CHART
PRODUCT REPEAT
2" - 8" 9" - 14" 15" - 24"
Bix 15% 30% 75%
Yardage quotations will also be provided for orderof 10 or more pieces.
Pattern matching on Bix
Due to Coalesse’s high standards for pattern match-ing, we reserve the right to apply the followingupcharges for extra labor incurred by a pattern ormaterial that poses such challenges.
Customers will be informed if an upcharge will beapplied to their order during the approval process.Should Coalesse receive an order without priorapproval, it will be held as pending until the cus-tomer accepts such charges. The upcharge will beapplied per item where applicable.
Cutting direction guidelines
Cutting direction is based on the fabric width andthe way the fabric is cut from the roll and appliedto Coalesse products. There are two cutting direc-tions: railroaded or cut-right.
Horizontal or railroaded (across roll, warp hori-zontal) means fabric is cut across the roll; sel-vages are on the top and bottom.
Vertical or cut-right (down roll, warp vertical)means fabric is cut in the same direction it iswoven; selvages are on the left and right sides.
Coalesse reserves the right to railroad or applyfabric according to weave unless instructionsspecify otherwise. Fabrics are railroaded whenpossible to avoid seams in large upholstered areasand/or single cushion units. If a fabric is question-able, a cutting of adequate size showing full repeat(if any) should be sent to Coalesse for a fabricrequirement quotation.
• Top: - Laminate top (Grade 1 laminates) with matching plastic edge - Laminate top (Grade 1 Steelcase) with contrasting plastic edge - Wood top with matching flat wood edge• Frame, tilted display surface for rectangular tables, and support leg for corner tables, if selected: paint• Grommet, if selected: black plastic only• Screens, if selected: translucent material only• Wire management clips: black plastic only• Attachment hardware
1 Style number2 Laminate or wood color number for top3 Plastic edge color number for top with Grade 1 Steelcase or Grade 2 laminate, if selected4 Paint color number for frame, tilted display surface for rectangular tables, and support leg for corner tables, if selected5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
• Top: - Laminate top (Grade 1 laminates) with matching plastic edge - Laminate top (Grade 1 Steelcase) with contrasting plastic edge - Wood top with matching flat wood edge• Base: textured paints only• Grommet, if selected: black plastic only
1 Style number2 Laminate or wood color number for top3 Plastic edge color number for top with Grade 1 Steelcase or Grade 2 laminate, if selected4 Textured paint color number for base5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
• Top: - Laminate top (Grade 1 laminates) with matching plastic edge - Laminate top (Grade 1 Steelcase) with contrasting plastic edge - Wood top with matching flat wood edge• Base: textured paints only• Grommet, if selected: black plastic only
1 Style number2 Laminate or wood color number for top3 Plastic edge color number for top with Grade 1 Steelcase or Grade 2 laminate, if selected4 Textured paint color number for base5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
• Base: 8040 Aluminum Matte Polished• Upholstery for chair: fabric or leather• Glides
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to SpecifyTip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
• Upholstered seat and back cushion: fabric or leather• Bent ply frame
1 Style number2 Fabric or leather color number for upholstery, if selectedcSee Coalesse Surface Materials Reference Guide.3 Wood species/finish number (See matrix below)
Overall: 321⁄2"D 361⁄4"W 26"HSeat: 133⁄4"H
Tip: Not all finishes offered onevery wood species, see matrixbelow.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Contact Coalesse CustomerService for a collection of curatedupholstered shell chairs.
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
1 Style number2 Papercord: (See prices below) - Black: P500 - Natural: P5013 Wood species/finish number, (See matrix below)
Overall: 283⁄4"D 28"W 283⁄4"HSeat: 151⁄4"H
Tip: Not all finishes offered onevery wood species, see matrixbelow.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Style U.S. PricesNumber Papercord: Natural Black
CH25OAK $6876 $7763
CH25SMKOAK $7479 $8366
Finish Wood Species Number: Oak Smoked Oak
Lacquer 3255 3783
White Oil 3265 N.A.
Oil 3227 3233
Soap 3225 N.A.
CHS Color 3235 N.A.
Wood Species/Finish Number Matrix
Specification Information
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
1 Style number2 Papercord: (See prices below) - Black: P500 - Natural: P5013 Wood finish number, (See matrix below)4 Options, if selected (see below)
Overall: 26"D 25"W 311⁄2"HSeat: 151⁄4"H
Tip: Not all finishes offered onevery wood species, see matrixbelow.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Cushion • Customer’s own material (COM) +$ 992 Specify with COM and select fabric color number. • Fabric group 1 +$1052 Specify with cushion and select color number. • Fabric group 2 +$1217 Specify with cushion and select color number. • Fabric group 3 +$1304 Specify with cushion and select color number. • Fabric group 4 +$1448 Specify with cushion and select color number. • Fabric group 5 +$2305 Specify with cushion and select color number. • COL +$1869 Specify with leather cushion and select color number.
cSee Coalesse Surface Materials Reference Guide. • Loke leather +$1878 Specify with leather cushion and select color number. cSee Coalesse Surface Materials Reference Guide. • Thor Leather +$2148 Specify with leather cushion and select color number. cSee Coalesse Surface Materials Reference Guide. • SIF Leather +$2957 Specify with leather cushion and select color number. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Papercord: Natural Black
CH44OAK $3891 $4165
COM/yds = 11⁄2, COL/sq ft = 20
Finish Wood Species Number: Oak
Lacquer 3255
White Oil 3265
Oil 3227
Soap 3225
CHS Color 3235
Wood Species/Finish Number Matrix
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES
d = Available in Rapid10.
• Frame: unibody construction of hardwood plywood utilizing box joinery• Upholstery: multiple densities of polyurethane foam fixed seat and back with top stitch on seams• Legs: hardwood maple or walnut
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back4 Wood color number for legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting Fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Pricing based on highestgrade textile specified.
Tip: Contrasting option notavailable on benches.
Tip: Optional steel leg has90° corner taper shape.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Benches are flat and seatsand loveseats are angled. Thesewill not be aligned when placednext to each other. A table isrecommended between the unitsto minimize the difference.
Circa Upholstered Modular Arm Rests–Straight and 15°
DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction of hardwood plywood utilizing box joinery• Upholstery: multiple densities of polyurethane foam • Top stitch on seams• Legs: hardwood maple or walnut • Ganging brackets and hardware included
1 Style number2 Fabric or leather color number for arm rests3 Wood color number for legs4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: Pricing based on highestgrade textile specified.
Tip: Optional steel leg has90° corner taper shape.
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Straight armrests and +$ 19 Specify with acrylic backer. 15° armrests cSee Coalesse Surface Materials Reference Guide.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Circa Upholstered Modular Arm Rests–30° and Ottoman
DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction of hardwood plywood utilizing box joinery• Upholstery: multiple densities of polyurethane foam • Top stitch on seams• Legs: hardwood maple or walnut • Ganging brackets and hardware included
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for arm rests4 Wood color number for legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Please submit sketch formodular applications. For gang-ing, contact Customer Service.451-GANGPKG is available for$34 list (one per two chairs).
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Contrasting option availableonly on ottoman.
Tip: 90° corner tapered shapeleg is standard on arm rests.The ottoman legs are singlewidth taper with no corner.
Tip: Special color match, consultCustomer Service.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • 30° armrests and ottoman +$ 32 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
30° Inside Arm Rest–Intermediate without Legs451-A3730FIG $1111 $1111 $1131 $1165 $1269 $1337 $1415 $1469 $1566 $1700 $1295 $2571 $2803
COM/yds = 3, COL/sq ft = 66
30° Inside Arm Rest–End of Run with Two Legs451-A3730FIER $1246 $1246 $1266 $1300 $1404 $1472 $1550 $1604 $1701 $1835 $1430 $2706 $2938
COM/yds = 3, COL/sq ft = 66
30° Outside Arm Rest–Intermediate without Legs451-A3730FOG $1111 $1111 $1131 $1165 $1269 $1337 $1415 $1469 $1566 $1700 $1295 $2571 $2803
COM/yds = 3, COL/sq ft = 66
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Overall: 291⁄2"D 363⁄4"W 17"H
Overall: 291⁄2"D 363⁄4"W 231⁄2"H
Tip: Specify left or right facing.
Overall: 291⁄2"D 363⁄4"W 17"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: Optional steel leg has a 90°corner tapered shape.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Style U.S. Base PricesNumber Walnut or Maple
30° Freestanding Low Table with Four Legs45-T3730L $1962
30° Freestanding High Table with Four Legs45-T3730H $2630
60° Freestanding Table–Planter with Five Legs45-T7460HP $5235
Specification Information
Options U.S. Price Required to Specify
1 Style number2 Wood color number for legs and top3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Overall: 291⁄2"D 365⁄8"W 81⁄2"H
Overall: 29"D 3611⁄16"W 221⁄2"H
Overall: 331⁄4"D 703⁄4"W 221⁄2"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: Optional steel leg has 90°corner taper shape on all tablesexcept 42" round. 42" round hassingle width taper leg with nocorner.
Tip: The round plate that housesthe power/data module is pow-der coated to complement thepower/data module finish. Forthe black anodized aluminummodule, the round plate will bepainted in 4135 Matte Black.For the silver anodized alu-minum module, the round platewill be painted 4799 Platinum.
Glass Insert • Glass insert for round table +$254 Specify with glass insert. 3⁄4" thick with translucent coating on bottom surface square edge detail
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Power/Data Module • Two power/two data ports +$377 Specify finish color number.(45-T42RD only) for round table only black anodized aluminum or silver anodized aluminum
Style U.S. Base PricesNumber Walnut or Maple Sunburst Top
Freestanding Round Table45-T42RD $3551 $3826
Freestanding High Wedge Table45-T1815H $2125 N.A.
Freestanding High Straight Table45-T1300H $2506 N.A.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and on end-of-run tables only specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Leg Position • Left-side facing No cost Specify with left-side legs. • Right-side facing No cost Specify with right-side legs.
Style U.S. Base PriceNumber Walnut or Maple
Ganging Low Wedge Table45-T1815LG $1292
End-of-Run Low Wedge Table45-T1815LER $1464
Ganging High Wedge Table45-T1815HG $1781
Ganging High Straight Table45-T1300HG $2159
End-of-Run High Straight Table45-T1300HER $2366
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Overall: 28"D 181⁄2"W 81⁄2"HAngle Degree: 15°
Overall: 28"D 181⁄2"W 81⁄2"HAngle Degree: 15°
Overall: 28"D 181⁄2"W 221⁄2"HAngle Degree: 15°
Overall: 271⁄2"D 131⁄2"W 221⁄2"HAngle Degree: 0°
Overall: 271⁄2"D 131⁄2"W 221⁄2"HAngle Degree: 0°
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cGanging Tables, continued 107
Lounge Seating
Coalesse
Circa Ganging Tables
DESIGN ALISON SPEAR, AIA DESIGN ORIGIN: UNITED STATES
Style U.S. Base PriceNumber Walnut or Maple
End-of-Run High Wedge Table45-T1815HER $1948
Ganging Low Straight Table45-T1300LG $1261
End-of-Run Low Straight Table45-T1300LER $1464
30° Ganging without Legs45-T3730LG $1582
30° End-of-Run with Two Legs45-T3730LER $1769
30° End-of-Run with One Leg45-T28HER $1909
cSpecification Information, continued on next page
Specification Information
Options for Creating 90˚ Applications:
Overall: 28"D 181⁄2"W 221⁄2"HAngle Degree: 15°
Overall: 271⁄2"D 131⁄2"W 81⁄2"HAngle Degree: 0°
Overall: 271⁄2"D 131⁄2"W 81⁄2"HAngle Degree: 0°
Overall: 29"D 365⁄8"W 2"H(81⁄2" from floor once assembled)
Overall: 29"D 365⁄8"W 81⁄2"H
Overall: 133⁄4"D 271⁄2"W 221⁄4"H(81⁄2" from floor once assembled)
Tip: Model 45-T28HER has onlya single width tapered leg, nocorner.
cSpecification Information, continued from previous page
CoupeDESIGN DENNIE PIMENTAL / JOHN DUFFY DESIGN ORIGIN: UNITED STATES
d = Available in Rapid10.
• Frame: unibody construction of hardwood plywood utilizing box joinery• Legs: solid beech• Glides: non-adjustable • Upholstery: multiple densities of laminated polyurethane foam and polyester fiber on seat and back with top stitch sewing detail
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Wood color number for legs4 Fabric or leather color number for upholstery on seat and back5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: Pricing based on highestgrade textile specified.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 40 Specify with acrylic backer. • Loveseat +$ 53 Specify with acrylic backer. • Sofa +$ 65 Specify with acrylic backer. • Ottoman +$ 17 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Legs • Brushed aluminum +$166 Specify with brushed aluminum legs. • Powder coat +$131 Specify with powder coat legs and select color: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss • Acrylic: clear +$232 Specify with acrylic legs.
Casters • Ottoman casters +$146 Specify with casters.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Coupe Grande/MobileDESIGN DENNIE PIMENTAL / JOHN DUFFY DESIGN ORIGIN: UNITED STATES
d = Available in Rapid10.
• Frame: unibody construction of hardwood plywood utilizing box joinery• Legs: solid beech• Glides: non-adjustable • Upholstery: multiple densities of laminated polyurethane foam and polyester fiber on seat and back with top stitch sewing detail• On 476M model: - Casters: swivel hard - Locking and non-locking wheels Tablet: - Laminate - 131⁄2" diameter
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Wood color number for legs4 Fabric or leather color number for seat and back5 Laminate color number for 476M tablet, if selected6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
DESIGN DENNIE PIMENTAL / JOHN DUFFY DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction of hardwood plywood utilizing box joinery• Side panels and legs: solid wood• Glides: non-adjustable • Upholstery: multiple densities of laminated polyurethane foam and polyester fiber on seat and back with top stitch sewing detail
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Wood finish number for legs and side panels4 Fabric or leather color number for upholstery on seat and back5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
• Upholstery for chair or bench: fabric or leather• Glides: non-adjustable metal
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
cSee page 116 for Multi-Fabric Diagram.
Tip: K suffix must be specifiedfor leather underside.
Tip: Models with fabric under-side include black denim sectionto allow for proper air flow. Ifthis aesthetic is not desired,select contrasting option withleather underside.
Standard Includes Required to Specify
Surface • Contrasting Fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 55 Specify with acrylic backer. • Large bench +$ 34 Specify with acrylic backer. • Medium bench +$ 25 Specify with acrylic backer. • Small bench +$ 15 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
EvaneauDESIGN LAUREN ROTTET DESIGN ORIGIN: UNITED STATES
• Frame: selected hardwood• Legs: black powder coat• Upholstery: - Multiple densities of polyurethane foam and polyester fiber• Pillows, if selected: fabric or leather
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back or pillows, if selected4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 53 Specify with acrylic backer. • Two-seat sofa +$ 78 Specify with acrylic backer. • Three-seat sofa +$112 Specify with acrylic backer. • Low round ottomans +$ 23 Specify with acrylic backer. • High ottomans +$ 34 Specify with acrylic backer. • Back and arm pillows +$ 8 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Legs • Plated: brushed carbon steel +$469 Specify with plated legs. • Plated: brushed carbon +$702 Specify with plated legs. steel (on 14-10R, 14-10L, or 14-30)
Attachment • Attachment straps +$126 per cushion Specify with attachment straps.Straps • Pillow attachment straps +$ 65 Specify with pillow attachment straps.
Casters • Dual wheel casters for ottoman +$122 Specify with dual wheel casters.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: All pillows and arm bolsters must be specifiedseparately.
14-30K Three Seat Sofa
Upholstery selections (default for entire unit if Bis not selected):
Back
Back Cushion
Base Frame
Arms
Total List Price Upcharge For Contrasting Fabrics = $121 U.S.list per contrasting fabric specified. List pricebased on highest grade textile specified.
Surface Pillow for lounge chair and lounge chair with ottomanMaterials • Fabric groups 6-10 No cost Specify fabric color number. • Fabric group 11 +$149 Specify fabric color number. • Fabric group 12 +$168 Specify fabric color number. • Fabric group 13 +$203 Specify fabric color number. • Fabric group 14 +$252 Specify fabric color number. • Fabric group C +$355 Specify fabric color number. • Fabric group E +$427 Specify fabric color number. • Customer's Own Material (COM) +$ 41 cSee Coalesse Surface Materials Reference Guide. • Customer's Own Leather (COL) +$281 cSee Coalesse Surface Materials Reference Guide.
Pillows for two-seat sofa • Fabric groups 6-10 No cost Specify fabric color number. • Fabric group 11 +$260 Specify fabric color number.
• Fabric group 12 +$294 Specify fabric color number. • Fabric group 13 +$356 Specify fabric color number. • Fabric group 14 +$441 Specify fabric color number. • Fabric group C +$628 Specify fabric color number. • Fabric group E +$759 Specify fabric color number. • Customer's Own Material (COM) +$ 41 cSee Coalesse Surface Materials Reference Guide. • Customer's Own Leather (COL) +$281 cSee Coalesse Surface Materials Reference Guide.
• Contrasting fabric +$121 per fabric Add suffix K to the style number and select fabric color number.
Acrylic backer • Lounge chair +$ 42 Specify with acrylic backer. • Lounge chair with ottoman +$ 55 Specify with acrylic backer. • Two-seat sofa +$ 74 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Options U.S. Price Required to Specify
• Frame: plywood tab construction• Multiple densities of polyurethane foam and polyester fiber• Seat and back: fabric or leather• Wrap: made from ABS plastic• Footrest on fabric chair, if selected: Fusion fabric or leather• Footrest on leather chair, if selected: Fushion fabric or
leather to match seat and back• Glides: non-adjustable• Pull tab on ottoman, if selected: Nylon strap• Grommet for wire pass-through on models COURQLO
and COURQLOK, if selected• Pillow: fabric or leather
1 Style number2 Number of fabrics if contrasting fabric style
number is selected3 Fabric or leather color number for upholstery on seat, back, and pillow4 Fusion color number for footrest, if selected:
CL60 Caviar CL61 Portobello CL62 Graphite CL63 Java5 Color number for pull tab with ottoman,
if selected:CL40 RedCL41 BlueCL42 Black
6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers areElmosoft Grade C andElmorustical Grade E.
Tip: Frame design allows backto flex to support occupantsback shape.
Tip: Due to the design and con-struction techniques of the Hosulounge and sofa only certain tex-tiles can be successfully applied,therefore all COM fabrics mustbe submitted to Coalesse forapproval prior to orderacceptance.
Tip: Hexa fabrics (fabric group10) were specifically designedby Patricia Urquiola for Hosulounge and sofa seating.cSee Coalesse Surface MaterialsReference Guide for completelisting of Hexa fabrics.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
• Base frame: steel with molded rigid foam• Seat frame: plywood with molded foam• Base: chrome plated steel• Auto swivel return mechanism
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Overall: 29"D 301⁄4"W 271⁄2"HSeat: 161⁄4"HArm: 261⁄4"HInside: 211⁄2"D x 161⁄2"–23"W x 11"H
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Lounges and chaises arestandard with two glides perscreen section or seat deck.Each glide can adjust 1⁄2" foruneven floors.
Personal table tops are standard in High-PressureLaminate with 3 mm plasticedge or Fusion fabric.
Lounges and benches areoffered in one-, two-, andthree-seat models. The chaiseis offered in two- and three-seat models. The correspon-ding table offering works withthe seating dimensions forcomplete systematic compatibility.
Coalesse
LagunitasDESIGN TOAN NGUYEN
Screens are available in twoheights for lounges andchaises. Low-back screens are263⁄4"H and high-back screensare 50"H. Overall height oflow-back units is 323⁄8".
Screens are available in knitor fabric.
Seat deck is available in knitor fabric and must be samematerial as the screen.
Welt cord is standard on fabricscreens and will match theoutside screen fabric selectionif contrasting is selected.
Tables are offered in threetypes; work, occasional, andpersonal tables. 26"H tabledimensions are curated towork with the lounge piecesfor optimal compatibility.281⁄2"H work tables are com-patible with standard heightseating.
Table glides are non-adjustableand are clear plastic.Work and occasional table
tops are standard in High-Pressure Laminate with a 3 mmplastic edge or wood veneerwith a 3 mm matching edgeprofile.
Table bases and columns arestandard in powder coat paint.
Lounge units can be connectedtogether to create permanentconnections for L- and U-configurations. The alignmentconnector bracket packageincludes two brackets to con-nect the seat decks and onescreen alignment clip to keepthe screens aligned.
All corners are standard with astationary corner cushion for alltwo- and three-seat lounges andchaises. Arm cushions areoptional on units with left- andright-hand screens to allow forarticulating backs on all backcushions.
Articulating back is standardon lounges and chaises whichallow user to change from alounge position to a task position within the same unit.An integrated handle at the topand bottom intuitively identifiesthe back and aids in the functionof the back.
Lagunitas offers a wide rangeof highly customizable set-tings, bringing a new level ofversatility to all the ways wework. Lagunitas adapts tochanging work styles and shifting postures. Lagunitasutilizes a full range of designexpressions with benches,lounge pieces, and tables.Fabric and knit, combined withhigh and low panels, allow fora full range of aesthetic andfunctional possibilities.Benches complement therange of lounge pieces. Work,occasional, and personal tablesare curated to work specifi-cally with Lagunitas loungesand benches. Integrated poweroptions for the lounges,benches, and tables are avail-able. Lagunitas supports exist-ing and emerging workactivities in an endless numberof social, collaborative, andpersonal settings.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cLagunitas, continued 129
One-seat lounges are available in low- and high-backscreens. Screens can be backonly or back and left- andright-hand screens. One-seatlounges are standard withupholstered fabric or knitscreen(s), fabric or knit seatdeck, fabric or leather seatcushion, and articulating backcushions. Fabric or leather endarm cushions are available.
Product Details
Screens are offered in twotypes of materials, knit andfabric. The knit panels allowfor some transparency andlight to pass though the panels. The fabric panels can be either monolithic (non-contrasting) or can bespecified in differing finishes(contrasting) for the inside and outside of the screen.Tip: If a contrasting screen isspecified, the fabric must bechosen from the same fabricfamily.
Seat deck is offered in twotypes of materials, knit andfabric. The seat deck materialmust match the screen mate-rial. If knit is specified on thescreen, the seat deck will beapplied automatically to thescreen choice,. If fabric isspecified, seat deck mustmatch either the inside oroutside screen finish if con-trasting is selected. When non-contrasting fabric screen isselected, seat deck will matchscreen fabric.
Two- and three-seat chaisesare available in low- and high-back screens. Screens areback and left- or right-handed.Two- and three-seat chaisesare standard with upholsteredfabric or knit screens, fabric orknit seat deck, fabric or leatherseat and corner cushion.Tip: Handedness is determinedwhile in the seated position.
Benches are available in one-,two-, or three-seat models.Benches are standard with anupholstered knit or fabric seatdeck and a fabric or leatherseat cushion.
Two- and three-seat loungesare available in low- and high-back screens. Screens can beback only or back with left- or right-hand screens, or backand left- and right-handscreens. Two- and three-seatlounges are standard withupholstered fabric or knitscreen(s), fabric or knit seatdeck, fabric or leather seatcushions, fabric or leatherarticulating back(s) and or cor-ner cushion(s). Fabric orleather end arm cushions are available.Tip: Handedness is noted byseated position.
A welt cord is standard on allfabric specified screens andseat decks. The welt cord fin-ish is non-specifiable and isthe same fabric finish as theoutside screen specificationwhen contrasting screens arespecified. For non-contrastingscreens the welt cord machesthe screen specification. Theknit screen and seat deck doesnot require a welt cord.
Seat back and seat cushionscan be specified in:• Fabric or leather (one fabric choice)• Contrasting fabric or leather - Seat backs - Seat cushionThe seat back and seat cushioncan be specified in fabric orleather. It can be specified asnon-contrasting, one finish, orcontrasting, finish for backcushions(s) and finish for seatcushion. Specification of backcushion is for all back cush-ions for that style number.Specification of seat cushion isfor all seat cushions for thestyle number.
Comfort wrinkles areintended to occur over the timeto increase the comfort ofLagunitas. Very little mainte-nance is required to reduce thedefinition: smooth the cushionfabric with a spreading/wipingmotion.
Backcushions
Backcushions
Seatcushions
Seatcushions
Work tables are available insix differing sizes, rangingfrom 30"W to 72"W that coor-dinate with the lounge dimen-sions to create a variety ofsocial, collaborative, and per-sonal applications. The worktables are available in twoheights: 26"H and 281⁄2"H. Thework tables are comprised of asingle column rectangular basein powder coat paint and a rec-tangular table top in laminatewith matching or complement-ing 3 mm flat edge band profileor wood veneer with matching3 mm flat wood edge band.
Occasional tables are available in two sizes, 32"Wand 48"W, that coordinate withthe lounge, chaise, and benchdimensions. The occasionaltables are comprised of a sin-gle column with rectangularbase available in powder coatpaint and a rectangular tabletop in laminate with matchingor complementing 3 mm flatedge band profile or woodveneer with matching 3 mmflat wood edge band.
Personal table is available inone size. It can easily bemoved to your desired locationfor short term laptop work orsimply used to set your coffee.The personal table is com-prised of a single column withrectangular base available inpowder coat paint and a rec-tangular table top in laminatewith matching or complement-ing 3 mm flat edge band profileor a Fusion fabric-wrappedsurface.
16" seat height is standard onall seating and benches. The16"H seat height integratesspecifically with the heights ofall Lagunitas tables. There isan additional 11⁄4" crown of theseat cushion, which makes it171⁄4" to work with the 26"work table height.
Two screen heights are available, 263⁄4"H for the low-back screen and 50"H forthe high-back screen. Seatback cushions extend abovethe low-back screen, there-fore, the overall height of low-back units is 323⁄8"H.Low-back screens aredesigned to provide an openenvironment. High-backscreens are designed to provide privacy.
Screens and seat deck can be specified in:• Knit• Fabric (one fabric choice)• Contrasting fabric (must be from fabric family) - Inside screen - Outside screen - Seat deck must match either the inside or outside fabric choice
Tip: Leather and vinyl are not approved for the screen(s) and seatdeck. Consult the fabric database for fabric approvals.Tip: It is important to understand the seat deck implication for con-trasting fabric selection when two or more pieces are attached oradjacent to each other. The seat deck for contrasting fabric specifica-tion is either the outside screen (top example) or inside screen (bot-tom example).
An additional 113⁄16" thicknessfor each end screen or corner is added to the seatingwidth to obtain the overallwidth of the product.
Corner cushions are standardwhen specifying two or threescreens with closed end(s).Corner cushion are fixed anddo not articulate.
Two corner cushions or twoend cushions are available onall two- and three-seat loungeswhen back, left- and right-hand screens are specified. Ifarticulating backs are speci-fied, end cushions arerequired.
113/16"
Two end cushionswith two articulating backs
Two corner cushions
Two end cushions withthree articulating backs
Two corner cushions withmiddle articulating back
The articulating back is standard on all lounges andthree-seat chaises (two-seatchaises are only available witha corner cushion). The articu-lating back allows the user toeasily change postures from alounge position, when the back cushion is fully upright, to atask position, when the seatback is articulated down.Simply use the integrated handles, one at the top and oneat the bottom, to position theseat back to the desired position. The articulatingmechanism is completely hid-den behind the back cushion,and attaches the cushion to theseat frame.
Handles at top and bottom ofall articulating backs aid theuser to change from a loungeposition to a task position andback to the lounge position.
Lounge position
Task position
Tophandle
Bottomhandle
Glides adjust 1⁄2" for unevenfloors. There are two glidesper screen and/or seat deck.Glides have a metal roundedfoot.
Space is available under theseat deck of all Lagunitas seating to provide a place totemporarily store personalitems. The clearance height,without power module(s), is103⁄4" and the depth is 3211⁄16".
Work tables are available intwo heights: 26"H tables areoptimized to work with thelounge seat height, while281⁄2"H tables work with standard height seating.
Occasional tables are available in one optimizedheight, 16"H, to work with thelounge seat height.
Seat depth accommodates twodepths due to the articulatedback design. In the loungeposition, the seat depth is221⁄2"D and in the task position,the seat depth is 173⁄4"D.
The overall seat depth onbenches is 325⁄8"D. The overalldepth for lounge seating is34"D.
173/4"D
221/2"D
Lounge
34"D
325/8"D
Bench
Two seat widths are available,259⁄16"W and 3211⁄16"W. Whenspecifying corner or end cush-ions, the 3211⁄16"W module isused. The corner cushion andend cushion account for 71⁄8"of the 3211⁄16" width, equatingto the same seating space asthe 259⁄16"W module.Exception: One-seat lounge withthree screens has an overallwidth of 467⁄8" allowing for aseating space of 3211⁄16"W.
259/16" 259/16" 259/16"
Three-seat lounge
Three-seat chaise, right-hand configuration
3211/16" 259/16" 259/16"
Three-seat lounge, right-hand screen
3211/16" 259/16" 259/16"
Two-seat lounge, left-hand screen
259/16" 3211/16"
71/8"
One-seat lounge, left- and right-hand screens
259/16" 71/8"
Three-seat lounge, left- and right-hand screens
3211/16" 3211/16"259/16"
259/16" 259/16" 259/16"
Three-seat bench
Coalesse
LagunitasDESIGN TOAN NGUYEN
Coalesse Seating/Occasional Tables Specification Guide cLagunitas, continued 131
All work and occasionaltables have a rectangularmetal base with a centeredcolumn. The 3" columnincludes a cone at the top thatattaches to the worksurface.There are five rectangularbase dimensions:16"D x 235⁄8"W x 3⁄8"H for 18"D x 32"W24"D X 30"W and 24"D X 36"Wwork tables16"D x 315⁄8"W x 3⁄8"H for 18"D x 48"W occasional table21"D x 281⁄2"W x 3⁄8"H for 36"D x 40"W and 36"D x 48"Wwork tables21"D x 35"W x 3⁄8"H for 36"D x 57"W x work table21"D x 35"W x 1⁄2"H for 36"D x 72"W x work table
The personal table is availablein one height, 25"H, to workwith the lounge seat height.
The personal table has a rectangular metal base withthe column centered at theback of the base. The 11⁄4" col-umn includes a flat plate at thetop that attaches to the under-side of the top. The base plate dimension is 103⁄4"D x 153⁄4"Wx 3⁄8"H.
25"H
Non-adjustable 3"diameterplastic glides are standard onall tables. Glides are 3⁄8" thickfor the 36"D x 72"W table, 1⁄2"thick for all other work and occasional tables and 1⁄4" thickfor the personal table. For allwork and occasional tables theglide height is needed to routecords.
Tables are standard with aknife edge profile, that has theappearance of a 1⁄2" thick topthat tapers to an overall topthickness of 11⁄8".
High-Pressure Laminatetables are standard with amatching or complementing 3mm flat edge band. Woodveneer tables are standardwith a matching wood 3 mmflat edge band. The undersideof the table top is finished in black.
Specials are possible withLagunitas, to confirm practicality and obtain a quotation, contact CustomerService at 1.800.627.6770.
11/8"
Alignment connector bracketpackage includes two seatattachment brackets and onescreen alignment clip. Thealignment connector bracketpackage is used when perma-nent connection is needed forL-, U-, and straight configura-tions of two or more pieces.The screen alignment clip isnot needed for any bench con-nections, only the two seatattachment brackets would beutilized. The alignment connec-tor bracket package should notbe used if reconfigurations ofthe furniture pieces arerequired.
Attachment brackets forscreen connection to seatdeck must be specified ineither platinum matte or lowgloss black. Along with thebrackets, the entire frameunderneath will be painted tomatch the bracket finish specified.
Brackets can be specified in:• 4710 Low Gloss Black Paint (for dark color fabrics)• 4141 Platinum Matte Paint (for light color fabrics)
Connections
Optional power can be speci-fied on all seating components(lounge, chaise, and bench):• The power module consists of two power outlets.• The USB power module
consists of one USB portand one power outlet. Thereis one USB per port with twoamps.
Power modules can be positioned anywhere along theattachment rail underneath thefront lounge seat.
Power modules are availablein black. One optional powermodule is available on one-seat lounges. One or twooptional power modules areavailable on two- and three-seat lounges.
The power and USB powermodule options are located71⁄2" from the floor.
The power module has a 72"Lcord and contains wire manager clips to route thecord underneath the seat deckwhen desired.
Power, Data, Wiring &Cabling
71/2"
Lounge booth connectorscreen comes with two bottombrackets and two screen gang-ing alignment clips. The bottombrackets can be specified ineither 4710 Low Gloss BlackPaint or 4141 Platinum MattePaint. The paint should matchthe bracket specification of thelounge.
The power module cord isrouted to the back utilizingclips attached to the undersideof the lounge. The cord is thenrouted between the gap wherethe two screens meet whenwall plug in access is needed.
A metal grommet is an optionon all work and occasionaltables. The 3" grommet isflush-mounted and located in thecenter of the table top over thecone and column. The metalgrommet is available inanodized silver only.
Power and USB power mod-ules are options on all workand occasional tables. Thereare two 3" power optionslocated in the center of thetable top over the cone/column:• Power module (two power outlets)• USB power module (one
USB port and one poweroutlet). There are two USBsper port with one amp each.
The power modules come inone finish, silver, and are stan-dard with a 6' L power cord.
Power pod grommet and stopis an option on all work tables.The grommet is located in thecenter of the table top over thecone/column. The stop attachesto the column to help hold androute cords and cables throughthe column. The grommet andstop cap are available in blackor milk.
Grommet
Stop
The grommet allows for passthrough of cords and cables atthe desktop. The grommet isopen to allow for the powerpod to be housed over orstored on the table. The grommet inside dimension is31⁄2" and outside dimension is511⁄16".
Power pod includes six 15amp outlets with an energysaving illuminated on/offswitch. It comes with a 6' cordwith three prong plug. The toptray is milk and the powersource is silver with a milkface. It is UL and CSA listed.Tip: Power pod is sold separately.
The contour of the powerpod bottom cradle is designedto work in conjuction with thegrommet for a snug fit or can be used independently withouta grommet.
Work and occasional tablesroute cables and cords fromthe desktop through the column out through the base.Cords can be concealed in thecone.Tip: A powerstrip cannot fitinside the cone.Tip: If a desktop device isdesired, other than the standard power pod or powermodule, consult Specials engineering for capability.
Screen(s) and seat deck:• Knit• Fabric (contrasting and non- contrasting - contrasting must be same fabric family)
Seat and back cushion(s),contrasting and non-contrasting:• Fabric• Leather
Lounge attachment bracketsand frame:• Paint
Lounge glides:• Non-specifiable plated metal
Lounge power and USB powermodules (options):• Black powder paint with black receptacles
Work and occasional tabletop surface:• Laminated with matching or complementing 3 mm plastic edge band• Wood veneer with matching 3 mm wood edge • Custom wood finish (option)
Table base (cone or plate,column, and bottom plate):• Paint
Table glides:• Non-specifiable clear plastic
Metal grommet (option):• Non-specifiable (anodized silver)
Power pod grommet and stopcover (option):• 6000 Black plastic• 6052 Milk plastic
Table power and USB powermodules (options):• Non-specifiable silver paint with black receptacles
Personal table top surface:• Laminate with matching or complementing 3 mm plastic edge band• Fusion fabric
Note: Refer to the CoalesseSurface Materials ReferenceGuide for additional surfacematerials information.
Surface Materials
Laminates are available in twostandard grades. Additionallaminates from any manufac-turer may also be practical—see Other laminates below.
Grade 1 laminates include:• Coalesse standard laminatescSee Coalesse SurfaceMaterials Reference Guide.• Steelcase standard laminates (code 290A)cSee Steelcase SurfaceMaterials Reference Manual.• Any standard-grade Wilsonart laminate in solid color, woodgrain, or pattern finish (code 290A)
Grade 2 laminates (code290B) include any standard-grade, solid color, woodgrain,or patterned laminate fromNevamar (includes Matrix),Formica, or Pionite. Grade 2laminates may have extendedlead times. For details, contactCustomer Service at1.800.627.6770.
Other laminates that are notincluded in the Grade 1 orGrade 2 offerings may also beavailable, such as AbetLaminati and Laminart. Todetermine availability and pric-ing, contact Customer Serviceat 1.800.627.6770, with thelaminate manufacturer’s nameand the name and number ofthe laminate you want.
Laminate swatches are repro-duced in the Surface MaterialsColor Palettes.cSee Coalesse SurfaceMaterials Reference Guide for alist.
Laminate
Core
Backer
Swatch cards and actualsamples of Coalesse stan-dard laminates are availablefrom your Coalesse CustomerService representative. Forsamples of laminates fromother manufacturers, contactthem directly:Wilsonart1.800.433.3222Nevamar1.800.638.4380Formica1.800.FORMICAPionite1.800.285.5161Tip: Laminate manufacturerschange their offerings fre-quently. Always check availabil-ity before ordering.
Wood veneer table tops arefabricated with ArchitecturalGrade AA hand-selected hard-wood veneer, plain sliced, bookmatched, and bonded to thecore with a backing sheet forbalance. Coalesse’s primarywood finish, Clarity, is a water-borne UV topcoat, which pro-tects the environment whileproviding exceptional durabilityand resistance to water andchemical stains. Due to naturalvariations in wood, finishedproducts may vary from sam-ples in color, texture, andgrain.
Wood is a natural material;slight variations occur inveneer texture, color, grainconfiguration, and stainacceptance. Coalesse stainsare all applied with an exactingregard for consistency and arewell within traditional toler-ances for wood products. Tip: You should know that fin-ished tops may vary slightly intone or character from eachother or from the samplesCoalesse produces. No guaran-tee can be made of an absolutelyexact match.
Wood veneer swatches arereproduced in the SurfaceMaterials Color Palettes.cSee Coalesse SurfaceMaterials Reference Guide for alist.
Veneer
Core
Backer
Stain-to-Match option is aspecial Coalesse program thatwill match a wood stain sam-ple that you provide. There isno additional charge for thisservice. You must supply asample of reasonable size (3" x 3" or larger is usuallyadequate). Coalesse will for-mulate a stain, produce amatching sample, and send itto you for approval. When wereceive your written approval,we’ll schedule production ofyour order.Tip: Stain-to-Match will achievea color match to the sample only.Graining of the wood veneer andfinal surface finish may differfrom your original sample. SeeStain and Finish to Match.
Customer’s OwnMaterial/Leather (COM/COL)Program is available. cSee Coalesse Surface MaterialsReference Guide for additionalinformation.
Toan Nguyen
Programs & Services
Designers
Swatch cards and actualsamples of Coalesse stan-dard wood veneers are available from your CoalesseCustomer Service representative.
Additional wood veneerspecies are available. To confirm availability and todetermine pricing, contactCustomer Service at1.800.627.6770.
Stains applied to Coalessewood veneer table tops arestandard with the same staincolor applied to both the topand the solid hardwood edgeprofile. Coalesse strives toproduce a consistently highquality product and some natural variation in color is tobe expected. This is especiallyapparent on natural woodswhich have no stain applied,for example 3525 NaturalMaple. This color variation isnormal and reflects the uniqueand natural properties ofwood. This should not be considered a defect.
Stain swatches are repro-duced in the Surface MaterialsColor Palettes.cSee Coalesse SurfaceMaterials Reference Guide for alist.
Swatch cards and actualsamples of standard woodveneers are available fromyour Customer Service representative.
Additional wood veneerstains are possible. Coalesseoffers two programs toaccommodate customers whoneed special stains—Stain-to-Match and Stain and Finish toMatch.
Lagunitas offers a wide range of highly customizable settings with varying degrees of privacy and multimodal support that become a desired third place to collaborate,socialize, or focus on personal work as individuals spend less time at traditional workstations and require different postures for working,
Non-contrasting knit Grade 1 screens and seat deck with non-contrasting fabric Grade 10 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH1 One-Seat Lounge with Articulating Back and End Screen and Seat Deck $3502 $3502 Arm Cushions, High-Back, Left and Right Screens
Non-contrasting fabric Grade 10 screens and seat deck with contrasting fabric Grade 12 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH1 One-Seat Lounge with Articulating Back and End Screen and Seat Deck $5450 $5450 Arm Cushions, High-Back, Left and Right Screens
Coalesse Seating/Occasional Tables Specification Guide cThought Starters and Applications, continued 139
Coalesse
Lagunitas Thought Starters and Applications
DESIGN TOAN NGUYEN
Lounge Seating
Non-contrasting knit Grade 1 screens and seat deck and non-contrasting fabric COM on seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH2 Two-Seat Lounge with Articulating Back and End Screen and Seat Deck $4234 $ 4234 Arm Cushions, High-Back, Left and Right Screens
Contrasting fabric Grade 9 screens and seat deck and contrasting fabric Grade 14 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH2 Two-Seat Lounge with Articulating Back and End Screen and Seat Deck $6012 $ 6012 Arm Cushions, High-Back, Left and Right Screens
Lagunitas Thought Starters and Applications continued
DESIGN TOAN NGUYEN
1
Non-contrasting knit Grade 2 screens and seat deck and non-contrasting fabric Grade 6 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGCH3 Three-Seat Chaise with Corner Cushion and Screen and Seat Deck $3740 $3740 One Articulating Back, High-Back, Left Screen (Left-hand configuration)
Seat $ 578 $ 578
Back $1125 $1125
$5443
Non-contrasting fabric Grade 11 screen and seat deck and non-contrasting fabric Grade 11 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGCH3 Three-Seat Chaise with Corner Cushion and Screen and Seat Deck $5408 $5408 One Articulating Back, High-Back, Left Screen (Left-hand configuration)
Coalesse Seating/Occasional Tables Specification Guide cThought Starters and Applications, continued 141
Lounge Seating
Coalesse
Lagunitas Thought Starters and Applications
DESIGN TOAN NGUYEN
Non-contrasting knit Grade 1 screen and seat deck and non-contrasting fabric Grade 6 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH1 One-Seat Lounge with Articulating Back, Screen and Seat Deck $1620 $1620 High-Back Screen
Contrasting fabric Grade 9 screen and seat deck and non-contrasting fabric Grade11 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH1 One-Seat Lounge with Articulating Back, Screen and Seat Deck $2478 $2478 High-Back Screen
Lagunitas Thought Starters and Applications continued
DESIGN TOAN NGUYEN
1
2
Non-contrasting knit Grade 1 screen and seat deck and non-contrasting fabric Grade 10 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 2 COLAGLH2 Two-Seat Lounge with Two Articulating Backs, Screen and Seat Deck $2352 $ 4704 High-Back Screen
Contrasting fabric Grade 10 screen and seat deck and contrasting fabric Grade 10 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 2 COLAGLH2 Two-Seat Lounge with Two Articulating Backs, Screen and Seat Deck $3658 $ 7316 High-Back Screen
Coalesse Seating/Occasional Tables Specification Guide cThought Starters and Applications, continued 143
Lounge Seating
Coalesse
Lagunitas Thought Starters and Applications
DESIGN TOAN NGUYEN
Non-contrasting fabric Grade 13 screen and seat deck and non-contrasting leather Grade E seat andback Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLL2 Two-Seat Lounge with One Corner Cushion and Screen and Seat Deck $4891 $ 4891 One Articulating Back, Low-Back, Left Screen
Seat $1454 $ 1454
Back $3003 $ 3003
2 1 COLAGCL3 Three-Seat Chaise with Corner Cushion and One Articulating Back (Left-hand configuration) Screen and Seat Deck $5377 $ 5377
Non-contrasting knit Grade 1 screen and seat deck and non-contrasting leather Grade C seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH2 Two-Seat Lounge with Two Articulating Screen and Seat Deck $2352 $ 2352 Backs, High-Back
Seat $1284 $ 1284
Back $2323 $ 2323
2 1 COLAGCH3 Three-Seat Chaise with Corner Cushion and One Articulating Back (Left-hand configuration) Screen and Seat Deck $3241 $ 3241
Seat $1940 $ 1940
Back $2696 $ 2696
$13,836
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cThought Starters and Applications, continued 145
Lounge Seating
Coalesse
Lagunitas Thought Starters and Applications
DESIGN TOAN NGUYEN
Contrasting fabric COM screen and seat deck and non-contrasting fabric COM seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH2 Two-Seat Lounge with Two Articulating Backs, Screen and Seat Deck $2536 $2536 High-Back Screen
Contrasting Screens (option) $ 121 $ 121
Seat and Back $1256 $1256
2 1 COLAGCH3 Three-Seat Chaise with Corner Cushion and Screen and Seat Deck $3582 $3582 One Articulating Back (Left-hand configuration)
Non-contrasting knit Grade 1 screen and seat deck and contrasting fabric Grade 10 seat and back Quantity Style Number Description Components U.S. Base Price Total
1 1 COLAGLH3 Three-Seat Lounge with Three Articulating Backs, High-Back Screen and Seat Deck $3085 $ 3085
Seat $ 862 $ 862
Back $2091 $ 2091
Contrasting Cushions (option) $ 1 2 1 $ 1 2 1
2 1 COLAGCH3 Three-Seat Chaise with Corner Cushion and One Articulating Back (Left-hand configuration) Screen and Seat Deck $3241 $ 3241
Lagunitas Thought Starters and Applications continued
DESIGN TOAN NGUYEN
Non-contrasting mesh Grade 1 screen and seat deck and non-contrasting COM seat and back Quantity Style Number Description Components U.S. Base Price Total
Non-contrasting mesh Grade 1 screen and seat deck and non-contrasting COM seat and back Quantity Style Number Description Components U.S. Base Price Total
Non-contrasting mesh Grade 1 screen and seat deck and non-contrasting COM seat and back Quantity Style Number Description Components U.S. Base Price Total
• Seat deck and screen: grade 1 knit or fabric• Seat, articulating back cushion, and end arm cushions:
fabric or leather• Bracket: 4710 Low Gloss Black or 4141 Platinum Matte paint• Six adjustable glides • Ships assembled
Surface • Contrasting fabric for screen +$121 Specify with contrasting fabric and select Materials fabric or leather color number. • Contrasting fabric for cushion +$121 Specify with contrasting fabric and select fabric or leather color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • One-seat lounge with one +$309 Specify with fire code seating. low-back screen • One-seat lounge with one +$473 Specify with fire code seating. high-back screen cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • One-seat lounge with +$ 34 Specify with acrylic backer. one low-back screen • One-seat lounge with +$ 70 Specify with acrylic backer. one low-back screen, one right- and one left-hand screen • One-seat lounge with +$ 56 Specify with acrylic backer. one high-back screen • One-seat lounge with +$ 92 Specify with acrylic backer. one high-back screen, one right- and one left-hand screen cSee Coalesse Surface Materials Reference Guide.
• COM +$154 Specify with COM and select fabric color number. cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide.
Power/USB • One power module: two power +$314 Specify with one power module, with twoConfiguration in 4710 Black paint power. • One power module: one USB/ +$417 Specify with one power module, with one one power in 4710 Black paint power/one USB.
Options U.S. Price Required to Specify
Standard Includes Required to Specify
1 Style number2 Knit color number for screen and seat deck,
if selected3 Fabric color number for non-contrasting
screen (includes inside and outside) andseat deck, if selected
4 Fabric color number for contrasting outsidescreen (same family as inside screen), ifselected
5 Fabric color number for contrasting insidescreen (same family as outside screen), ifselected
6 Seat deck to match inside or outsidescreen, if contrasting screen is selected
7 Fabric or leather color number for non-con-trasting seat and back cushion, if selected
8 Fabric or leather color number for contrast-ing seat cushion, if selected
9 Fabric or leather color number for contrast-ing back cushion, if selected
10 Paint color number for bracket 11 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: For each USB port speci-fied, there is one USB per port.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: Fire code seating is notavailable on one-seat loungechairs with side screens.
Tip: Fire code seating is notavailable on chairs with con-trasting fabric.
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
One-Seat Lounge with Articulating Back and End Arm Cushions, Low-Back, Left and Right ScreensCOLAGLL1 Screen and Seat Deck $2457 $2852 $2798 $3284 $ 3376 $3535 $ 4016 $ 4327 $ 4686 $ 4936 $ 5382 $ 6001 N.A. N.A. N.A.
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
One-Seat Lounge with Articulating Back and End Arm Cushions, High-Back, Left and Right ScreensCOLAGLH1 Screen and Seat Deck $3502 $3975 $ 3921 $4407 $4499 $4658 $ 5139 $5450 $ 5809 $ 6059 $6505 $ 7124 N.A. N.A. N.A.
• Seat deck and screen: grade 1 knit or fabric• Seat, articulating back cushion, back corner cushion, and end
arm cushions, if selected: fabric or leather• Bracket: 4710 Low Gloss Black or 4141 Platinum Matte paint• Six adjustable glides• Ships assembled
Handedness • Left-hand, two-seat lounges No cost Specify left-hand configuration. only (seated position) • Right-hand, two-seat lounges No cost Specify right-hand configuration. only (seated position)
cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric for screen +$121 Specify with contrasting fabric and select Materials fabric or leather color number. • Contrasting fabric for cushion +$121 Specify with contrasting fabric and select fabric or leather color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • Two-seat lounge with low or +$473 Specify with fire code seating. high-back screen cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Two-seat lounge with one +$ 54 Specify with acrylic backer. low-back screen • Two-seat lounge with one +$ 83 Specify with acrylic backer. low-back screen, one right- or left-hand screen • Two-seat lounge with one +$112 Specify with acrylic backer. low-back screen, one right- and one left-hand screen • Two-seat lounge with +$ 83 Specify with acrylic backer. one high-back screen • Two-seat lounge with +$126 Specify with acrylic backer. one high-back screen, one right- or left-hand screen
• Two-seat lounge with one +$169 Specify with acrylic backer. high-back screen, one right- and one left-hand screen cSee Coalesse Surface Materials Reference Guide.cOptions, continued on next page
Options U.S. Price Required to Specify
Required Selections U.S. Price Required to Specify
Standard Includes Required to Specify
1 Style number2 Left- or right-hand configuration, if selected
(see below under Required Selections)3 Knit color number for screen and seat deck,
if selected4 Fabric color number for non-contrasting
screen (includes inside and outside) andseat deck, if selected
5 Fabric color number for contrasting outsidescreen (same family as inside screen), ifselected
6 Fabric color number for contrasting insidescreen (same family as outside screen), ifselected
7 Seat deck to match inside or outsidescreen, if contrasting screen is selected
8 Fabric or leather color number for non-contrasting seat and back cushion, ifselected
9 Fabric or leather color number for contrast-ing seat cushion, if selected
10 Fabric or leather color number for contrast-ing back cushion, if selected
11 Paint color number for bracket 12 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: Fire code seating is notavailable on chairs with con-trasting fabric.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cTwo-Seat Lounges, continued 159
Coalesse
Lagunitas Two-Seat Lounges
DESIGN TOAN NGUYEN
cSee Coalesse Surface Materials Reference Guide.
Surface • COM +$154 Specify with COM and select fabric color Materials, number.continued cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide
Power/USB • One power module: two power +$314 Specify with one power module, with twoConfiguration in 4710 Black paint power. • One power module: one USB/one +$417 Specify with one power module, with one power in 4710 Black paint power/one USB. • Two power modules: two power +$628 Specify with two power modules, with two each in 4710 Black paint power. • Two power modules: one USB/one +$834 Specify with two power modules, with one power each in 4710 Black paint power/one USB.
Related • Bench cPage 182Products • Chaise cPage 174 • Work Tables cPage 185 • Occasional Tables cPage 186 • Personal Table cPage 187 • Alignment Connector cPage 184
Options U.S. Price Required to Specify
cOptions, continued from previous page
Overall: 511⁄4"W x 34"D x 323⁄8"HInside (Lounge): 511⁄4"W x 221⁄2"DInside (Task): 511⁄4"W x 173⁄4"D Seat: 16"H
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued on next page
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Lounge Seating
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: For each USB port speci-fied, there is one USB per port.
• Seat deck and screen: grade 1 knit or fabric• Seat, articulating back cushion, back corner cushion, and end
arm cushions, if selected: fabric or leather• Bracket: 4710 Low Gloss Black or 4141 Platinum Matte paint• Eight adjustable glides• Ships assembled
Handedness • Left-hand, three-seat lounges No cost Specify left-hand configuration. only (seated position) • Right-hand, three-seat lounges No cost Specify right-hand configuration. only (seated position)
cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric for screen +$121 Specify with contrasting fabric and select Materials fabric or leather color number. • Contrasting fabric for cushion +$121 Specify with contrasting fabric and select fabric or leather color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • Three-seat lounge with low- or +$615 Specify with fire code seating. high-back screen cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Three-seat lounge with +$ 73 Specify with acrylic backer. one low-back screen • Three-seat lounge with +$110 Specify with acrylic backer. one low-back screen, one right- or left-hand screen • Three-seat lounge with +$148 Specify with acrylic backer. one low-back screen, one right- and one left-hand screen • Three-seat lounge with +$126 Specify with acrylic backer. one high-back screen
• Three-seat lounge with +$163 Specify with acrylic backer. one high-back screen, one right- or left-hand screen • Three-seat lounge with +$201 Specify with acrylic backer. one high-back screen, one right- and one left-hand screen cSee Coalesse Surface Materials Reference Guide.
cOptions, continued on next page
Options U.S. Price Required to Specify
Required Selections U.S. Price Required to Specify
Standard Includes Required to Specify
1 Style number2 Left- or right-hand configuration, if selected
(see below under Required Selections)3 Knit color number for screen and seat deck,
if selected4 Fabric color number for non-contrasting
screen (includes inside and outside) andseat deck, if selected
5 Fabric color number for contrasting outsidescreen (same family as outside screen), ifselected
6 Fabric color number for contrasting insidescreen (same family as outside screen), ifselected
7 Seat deck to match inside or outsidescreen, if contrasting screen is selected
8 Fabric or leather color number for non-con-trasting seat and back cushion, if selected
9 Fabric or leather color number for contrast-ing seat cushion, if selected
10 Fabric or leather color number for contrast-ing back cushion, if selected
11 Paint color number for bracket 12 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: Fire code seating is notavailable on chairs with con-trasting fabric.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cThree-Seat Lounges, continued 167
Coalesse
Lagunitas Three-Seat Lounges
DESIGN TOAN NGUYEN
cSee Coalesse Surface Materials Reference Guide.
Surface • COM +$154 Specify with COM and select fabric color Materials, number.continued cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide.
Power/USB • One power module: two power +$314 Specify with one power module, with twoConfiguration in 4710 Black paint power. • One power module: one USB/one +$417 Specify with one power module, with one power in 4710 Black paint power/one USB. • Two power modules: two power +$628 Specify with two power modules, with two each in 4710 Black paint power. • Two power modules: one USB/one +$834 Specify with two power modules, with one power each in 4710 Black paint power/one USB.
Related • Bench cPage 182Products • Chaise cPage 174 • Work Tables cPage 185 • Occasional Tables cPage 186 • Personal Table cPage 187 • Alignment Connector cPage 184
Options U.S. Price Required to Specify
cOptions, continued from previous page
Overall: 763⁄4"W x 34"D x 323⁄8"HInside (Lounge): 763⁄4"W x 221⁄2"DInside (Task): 763⁄4"W x 173⁄4"DSeat: 16"H
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued on next page
Specification Information
Lounge Seating
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: For each USB port speci-fied, there is one USB per port.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Tip: Must specify articulating backs to obtain configurationabove.
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
Three-Seat Lounge with Three Articulating Backs and End Arm Cushions, High-Back, Left and RightScreensCOLAGLH3 Screen and Seat Deck $4966 $5648 $ 5411 $6078 $6204 $ 6421 $ 7078 $ 7506 $ 7999 $ 8342 $8952 $ 9802 N.A. N.A. N.A.
• Seat deck and screen: grade 1 knit or fabric• Seat and back corner cushion: fabric or leather• Bracket: 4710 Low Gloss Black or 4141 Platinum Matte Paint• Six adjustable glides• Ships assembled
Handedness • Left-hand, two-seat chaises No cost Specify left-hand configuration. only (seated position) • Right-hand, two-seat chaises No cost Specify right-hand configuration. only (seated position)
cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric for screen +$121 Specify with contrasting fabric and select Materials fabric or leather color number. • Contrasting fabric for cushion +$121 Specify with contrasting fabric and select fabric or leather color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • Two-seat chaise with low- or +$473 Specify with fire code seating. high-back screen cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Two-seat chaise with one +$ 70 Specify with acrylic backer. low-back screen and one right- or one left-hand screen • Two-seat chaise with one +$104 Specify with acrylic backer. high-back screen and one right- or one left-hand screen cSee Coalesse Surface Materials Reference Guide.
• COM +$154 Specify with COM and select fabric color number. cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide.cOptions, continued on next page
Options U.S. Price Required to Specify
Required Selections U.S. Price Required to Specify
Standard Includes Required to Specify
1 Style number2 Left- or right-hand configuration (see below
under Required Selections)3 Knit color number for screen and seat deck,
if selected4 Fabric color number for non-contrasting
screen (includes inside and outside) andseat deck, if selected
5 Fabric color number for contrasting outsidescreen (same family as outside screen), ifselected
6 Fabric color number for contrasting insidescreen (same family as outside screen), ifselected
7 Seat deck to match inside or outsidescreen, if contrasting screen is selected
8 Fabric or leather color number for non-con-trasting seat and back cushion, if selected
9 Fabric or leather color number for contrast-ing seat cushion, if selected
10 Fabric or leather color number for contrast-ing back cushion, if selected
11 Paint color number for bracket 12 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: Fire code seating is notavailable on chairs with con-trasting fabric.
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: Handedness is determinedwhile in the seated position.Illustration above shows left-hand chaise.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cTwo-Seat Chaises, continued 175
Coalesse
Lagunitas Two-Seat Chaises
DESIGN TOAN NGUYEN
Lounge Seating
cSee Coalesse Surface Materials Reference Guide.
Power/USB • One power module: two power +$314 Specify with one power module, with Configuration in 4710 Black paint two power. • One power module: one USB/one +$417 Specify with one power module, with one power in 4710 Black paint power/one USB. • Two power modules: +$628 Specify with two power modules, two power each with two power. in 4710 Black paint • Two power modules: one USB/one +$834 Specify with two power modules, with one power each in 4710 Black paint power/one USB.
Related • Lounge cPage 154Products • Bench cPage 182 • Work Tables cPage 185 • Occasional Tables cPage 186 • Personal Table cPage 187 • Alignment Connector cPage 184
Options U.S. Price Required to Specify
cOptions, continued from previous page
Tip: For each USB port speci-fied, there is one USB per port.
Overall: 593⁄8"W x 34"D x 323⁄8"HSeat: 16"H
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
Two-Seat Chaise with One Articulating Back, Low-Back, Left or Right ScreenCOLAGCL2 Screen and Seat Deck $2196 $2564 $2432 $2813 $2885 $3009 $3384 $3628 $3909 $4105 $ 4453 $ 4938 N.A. N.A. N.A.
• Seat deck and screen: grade 1 knit or fabric• Seat and back corner cushion: fabric or leather• Bracket: 4710 Low Gloss Black or 4141 Platinum Matte Paint• Six adjustable glides• Ships assembled
Handedness • Left-hand, three-seat chaises No cost Specify left-hand configuration. only (seated position) • Right-hand, three-seat chaises No cost Specify right-hand configuration. only (seated position)
cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric for screen +$121 Specify with contrasting fabric and select Materials fabric or leather color number. • Contrasting fabric for cushion +$121 Specify with contrasting fabric and select fabric or leather color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • Three-seat chaise with low- or +$615 Specify with fire code seating. high-back screen cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Three-seat chaise with +$ 91 Specify with acrylic backer. one low-back screen and one right- or one left-hand screen • Three-seat chaise with +$145 Specify with acrylic backer. one high-back screen and one right- or one left-hand screen cSee Coalesse Surface Materials Reference Guide.
• COM +$154 Specify with COM and select fabric color number. cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide.cOptions, continued on next page
Options U.S. Price Required to Specify
Required Selections U.S. Price Required to Specify
Standard Includes Required to Specify
1 Style number2 Left- or right-hand configuration (see below
under Required Selections)3 Knit color number for screen and seat deck,
if selected4 Fabric color number for non-contrasting
screen (includes inside and outside) andseat deck, if selected
5 Fabric color number for contrasting outsidescreen (same family as outside screen), ifselected
6 Fabric color number for contrasting insidescreen (same family as outside screen), ifselected
7 Seat deck to match inside or outsidescreen, if contrasting screen is selected
8 Fabric or leather color number for non-con-trasting seat and back cushion, if selected
9 Fabric or leather color number for contrast-ing seat cushion, if selected
10 Fabric or leather color number for contrast-ing back cushion, if selected
11 Paint color number for bracket 12 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: Fire code seating is notavailable on chairs with con-trasting fabric.
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: Handedness is determinedwhile in the seated position.Illustration above shows left-hand chaise.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cThree-Seat Chaises, continued 179
Coalesse
Lagunitas Three-Seat Chaises
DESIGN TOAN NGUYEN
Overall: 85"W x 34"D x 323⁄8"HSeat: 16"H
Style U.S. Base PricesNumber Knit Knit Fabric Grades: Leather Grades: Grade 1 Grade 2 COM 6 7 8 9 10 11 12 13 14 COL C E
Three-Seat Chaise with Two Articulating Backs, Low-Back, Left or Right ScreenCOLAGCL3 Screen and Seat Deck $2562 $3009 $ 2876 $ 3345 $3436 $ 3588 $ 4054 $ 4355 $ 4702 $ 4945 $ 5377 $ 5975 N.A. N.A. N.A.
cSpecification Information, continued on next page
Specification Information
Lounge Seating
cSee Coalesse Surface Materials Reference Guide.
Power/USB • One power module: two power +$314 Specify with one power module, with Configuration in 4710 Black paint two power. • One power module: one USB/one +$417 Specify with one power module, with one power in 4710 Black paint power/one USB. • Two power modules: two power +$628 Specify with two power modules, with each in 4710 Black paint two power. • Two power modules: one USB/one +$834 Specify with two power modules, with one power each in 4710 Black paint power/one USB.
Related • Lounge cPage 154Products • Bench cPage 182 • Work Tables cPage 185 • Occasional Tables cPage 186 • Personal Table cPage 187 • Alignment Connector cPage 184
Options U.S. Price Required to Specify
cOptions, continued from previous page
Tip: Handedness is determinedwhile in the seated position.Illustration above shows left-hand chaise.
Tip: For each USB port speci-fied, there is one USB per port.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• COM +$154 Specify with COM and select fabric color number. cSee Coalesse Surface Materials Reference Guide.
• COL +$281 Specify with COL and select leather color number. cSee Coalesse Surface Materials Reference Guide.
Power/USB One-seat benchesConfiguration • One power module: two power +$314 Specify with one power module, with in 4710 Black paint two power. • One power module: one USB/one +$417 Specify with one power module, with one power in 4710 Black paint power/one USB.
Two- and three-seat benches • Two power modules: two power +$628 Specify with two power modules, with two each in 4710 Black paint power. • Two power modules: one USB/one +$834 Specify with two power modules, with one power each in 4710 Black paint power/one USB.
Related • Lounge cPage 154Products • Chaise cPage 174 • Work Tables cPage 185 • Occasional Tables cPage 186 • Personal Table cPage 187
Options U.S. Price Required to Specify
Tip: Fire code seating is notavailable on chairs with contrasting fabric.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions andordering information.c See Coalesse SurfaceMaterials Reference Guide.
Tip: For any portion of the prod-uct that requires a COM, theadditional $150 upcharge is aone time charge per product.
Tip: For any portion of the prod-uct that requires a COL, theadditional $274 upcharge is aone time charge per product.
Tip: Must combine seat deck andlist screen pricing choice (knitgrade 1, knit grade 2, or fabric)from either non-contrasting orcontrasting pricing list with seatand back cushion list pricing(fabric and leather) from eithernon-contrasting or contrastingpricing list to obtain completedlist price.
Tip: For each USB port speci-fied, there is one USB per port.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Table top: – Grade 1 laminate with 3 mm flat plastic edge – Grade 1 wood with matching flat wood edge• Base with column: paint• Six non-adjustable glides • Ships ready to assemble
Standard Includes Required to Specify
1 Style number2 Table top width3 Laminate or wood color number for table top4 Plastic edge color number for laminate table
top, if selected5 Paint color number for base with column6 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
cSee Coalesse Surface Materials Reference Guide.
Surface Work table topMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select color number. • Grade 2 wood veneer Prices below Specify with Grade 2 wood veneer and select color number. • Stain-to-Match No cost Specify with stain-to-match. cSee Coalesse Surface Materials Reference Guide.
Power/USB Power module (two receptacles) Configuration and • One power module in silver +$261 Specify with power module, with two power.Grommets finish (center only)
USB power module (one USB port/one power receptacle) • One USB power module in +$364 Specify with USB power module, with one silver finish (center only) power/one USB.
3" metal grommet • One metal grommet in anodized +$ 79 Specify with 3" metal grommet. silver finish (center only)
Power Pod grommet • One Power pod grommet in +$ 52 Specify with Power Pod grommet and select 6052 Milk or 6000 Black plastic color number. finish (center only)
• Table top: – Grade 1 laminate with 3 mm flat plastic edge – Grade 1 wood with matching flat wood edge• Base with column: paint• Six non-adjustable glides • Ships ready to assemble
Standard Includes Required to Specify
1 Style number2 Table top width3 Laminate or wood color number for table top4 Plastic edge color number for laminate table
top, if selected5 Paint color number for base with column6 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
cSee Coalesse Surface Materials Reference Guide.
Surface Table topMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select color number. • Grade 2 wood veneer Prices below Specify with Grade 2 wood veneer and select color number. • Stain-to-Match No cost Specify with stain-to-match. cSee Coalesse Surface Materials Reference Guide.
Power/USB Power module (two receptacles) Configuration and • One power module in +$261 Specify with power module, with two power.Grommets silver finish (center only)
USB Power module (one USB port/one power receptacle) • One USB power module in +$364 Specify with USB power module, with one silver finish (center only) power/one USB.
3" metal grommet • One metal grommet in anodized +$ 79 Specify with 3" metal grommet. silver finish (center only)
Power pod grommet • One Power pod grommet in +$ 52 Specify with power pod grommet and select 6052 Milk or 6000 Black plastic color number. finish (center only)
• Table top: Grade 1 laminate with 3 mm flat plastic edge• Table base with column: paint• Four non-adjustable glides • Ships ready to assemble
Standard Includes Required to Specify
1 Style number2 Laminate color number for table top3 Plastic edge color number for laminate table
top, if selected4 Paint color number base with column5 Options, if selected (see below)c See Coalesse Surface Materials Reference Guide.
cSee Coalesse Surface Materials Reference Guide.
Surface Personal table topMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select color number. • Fusion fabric wrapped Prices below Specify with Fusion fabric and select color number.
• Base: paint• Seat and inner back, and outer back: fabric or leather• Arm caps: fabric or leather• Work lounge tablet, if selected: Fusion fabric only• Removable pillow: fabric or leather to match outer seat• Ottoman, if selected: fabric or leather• Pull tab on ottoman, if selected: paint
1 Style number2 Number of fabrics if contrasting fabric style
number is selected3 Paint color number for base4 Fabric or leather color number for inner and
outer seat, and arm caps5 Fusion color number for work lounge tablet,
if selected:CL60 CaviarCL61 PortobelloCL62 GraphiteCL63 JavaCL64 Steam
6 Fabric or leather color number for ottoman,if selected
7 Paint color number for pull tab on ottoman, if selected8 Options, if selected (see below)cSee Coalesse Surface Materials Reference
Guide.
Standard Includes Required to Specify
Tip: Upholstery intent is loose to provide visual and invitingcomfort.
Tip: Headrest is articulated toadjust forward and back 23⁄4" toaccommodate support needs.Headrest contains removeablepillow to allow reorientation anddiffering heights.
Tip: Base swivels with auto-matic return to center position.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number. cSee Coalesse Surface Materials Reference Guide.
Fire code seating • Fire code seating +$237 Specify with fire code seating. cSee Coalesse Surface Materials Reference Guide.
Acrylic backer • Lounge and work lounge +$ 43 Specify with acrylic backer. • Ottoman +$ 22 Specify with acrylic backer.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: constructed with finger jointed plywood• Steel 1⁄2" x 1 3⁄4" legs • Multiple densities of polyurethane foams and polyester fiber on seat and back: fabric or leather• The lifestyle collection has tufted pattern accents and separate back cushions with double needle top stitch: fabric or leather• The contract collection has quilted pattern accents with double needle top stitch: fabric or leather• Leg: paint• Ganging kit with attachment hardware, if selected
1 Style number2 Fabric or leather color number for seat, back, and arms 3 Paint color number for legs4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$ 121 per fabric Add suffix K to the style number and select Materials fabric color number. cSee Coalesse Surface Materials Reference Guide.
Acrylic backer Lifestyle chairs • Lounge chair +$ 57 Specify with acrylic backer. • Two-seat sofa +$ 95 Specify with acrylic backer. • Three-seat sofa +$ 131 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide. Contract chairs • Lounge chair armless +$ 23 Specify with acrylic backer. • Lounge chair with arms +$ 38 Specify with acrylic backer. • Lounge chair left or right +$ 32 Specify with acrylic backer. arm facing • Two-seat sofa armless +$ 38 Specify with acrylic backer. • Two-seat sofa with arms +$ 51 Specify with acrylic backer. • Two-seat sofa left or right +$ 45 Specify with acrylic backer. arm facing • Three-seat sofa armless +$ 51 Specify with acrylic backer. • Three-seat sofa with arms +$ 65 Specify with acrylic backer. • Three-seat sofa left or right +$ 57 Specify with acrylic backer. arm facing • Four-seat sofa armless +$ 65 Specify with acrylic backer. • Four-seat sofa with arms +$ 78 Specify with acrylic backer. • Four-seat sofa left or right +$ 71 Specify with acrylic backer. arm facing • Bench +$ 15 Specify with acrylic backer. • Two-seat bench +$ 23 Specify with acrylic backer. • Three-seat bench +$ 32 Specify with acrylic backer. • Four-seat bench +$ 38 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide. Bolsters • Square or round bolster pillows +$ 8 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Brushed nickel legs • Lounge chair +$ 796 Specify with plated metal. • Two-seat sofa +$ 902 Specify with plated metal. • Three-seat sofa +$1326 Specify with plated metal. • Four-seat sofa +$1438 Specify with plated metal. • One-seat bench +$ 796 Specify with plated metal. • Two-seat bench +$ 902 Specify with plated metal. • Three-seat bench +$1326 Specify with plated metal. • Four-seat bench +$1438 Specify with plated metal.
Attachment • Attachment straps for left and +$ 65 Specify with attachment straps for Straps for right sides left and right sides.Bolsters
Options U.S. Price Required to Specify
Tip: Attachment straps are stan-dard on back pillow of lifestylechairs.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cLounge, continued 193
MillbraeDESIGN COALESSE DESIGN STUDIO DESIGN ORIGIN: USA
• Base: steel, painted black gloss• Glass top: 3⁄4" thick glass• Legs: 1⁄2" x 13⁄4": paint• Glides
1 Style number2 Glass color number for top3 Paint color number for legs4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Interport power/data mod-ule is not available on Millbrae.
Standard Includes Required to Specify
Surface Brushed nickel baseMaterials • Side table, 30" x 30" and +$587 Specify with plated metal. 36" x 36" square tables and 20" x 54" and 30" x 60" rectangular tables • 48" x 48" square table and +$677 Specify with plated metal. rectangular tables
Dimensions Style U.S. Base PricesD W H Number Top Surface: Clear Clear Green Absolute Clear/ Absolute Colored Green Laminated/ Clear Frosted Clear Glass Clear Green Frosted Appearance
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arms• Legs: solid maple with non-adjustable glides
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Wood color number for legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 34 Specify with acrylic backer. • Loveseat +$ 45 Specify with acrylic backer. • Sofa +$ 55 Specify with acrylic backer. • Arm bolster +$ 8 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Attachment • Attachment straps available +$ 65 Specify with attachment straps.Straps on bolster pillow
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber• Legs: solid maple with non-adjustable glides
1 Style number2 Fabric or leather color number for upholstery3 Wood color number for legs4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • 17"D x 17"W ottoman +$ 8 Specify with acrylic backer. • 20"D x 26"W ottoman +$12 Specify with acrylic backer. • 36"D x 36"W ottoman +$25 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: solid maple• Upholstery: multiple densities of polyurethane foam • Legs: solid maple with non-adjustable glides• Button detail: tufted and double needled
1 Style number2 Fabric or leather color number for upholstery on bench3 Wood color number for legs4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For plain upholstery optionor contrasting textiles, contactCustomer Service.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • 20"D x 60"W bench +$25 Specify with acrylic backer. • 40"D x 40"W bench +$34 Specify with acrylic backer. • 30"D x 60"W bench +$38 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
DESIGN LAURINDA SPEAR,FAIA DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of laminated polyurethane foam• Glides: height adjustable with stainless steel finish leveling polyurethane glides• Double needle stitch seams
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on bench4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Pricing based on highestgrade textile specified.
Tip: Due to the design and con-struction techniques of Ripplelounge, only certain textiles canbe successfully applied, there-fore COM fabrics must be sub-mitted to Coalesse for approvalprior to order acceptance. Solidpatterns with no repeat are recommended.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: 35" is a single seat and 96"three seat/sofa.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Wave and flat seats +$ 69 Specify with acrylic backer. • Little Ripple wave and flat seats +$ 30 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arms.• Lounge: - Legs: 4799 Platinum Metallic powder coat steel legs with
“Go” glide• Mobile: - 131⁄2" diameter tablet: laminate - Legs: 4799 Platinum Metallic powder coat steel legs with casters - Casters: four non-locking
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Coordinating Sidewalktables, ottomans, benches, andcredenzas are available onpages 214, 363 and 364.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For multi-fabric diagram,refer to page 210.
Tip: Specify tablet from facingposition.
Tip: Cup holder attaches totablet.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Extra pivoter allows tabletto be moved side to side.
Tip: Tablet can be installed onmobile models only.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Lounge chair +$ 38 Specify with acrylic backer. • Lounge two-seat chair +$ 51 Specify with acrylic backer. • Arm bolster +$ 8 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Tablet on Mobile • Wood +$137 Specify with wood and select wood color.Models only • Anodized aluminum +$226 Specify with anodized aluminum.
Cup Holder • Cup holder +$ 50 Specify with cup holder.
Tablet Side Storage • Tablet side storage +$ 75 Specify with tablet side storage and select or right-facing.
Extra Pivoter • Extra pivoter +$183 Specify with extra pivoter.
Omit Tablet • Omit tablet –$158 Specify with omit tablet.
Glides Lounge • “No Go” 1⁄2" polyethylene glide No cost Specify with “no go”.
Mobile • Go glides No cost Specify with go glides.
Casters • Locking casters No cost Specify with locking casters.
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat and back• Legs: 4799 Platinum Metallic powder coat steel with
“Go” glides
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Overall width dimensionswith arm options: 430: 35"W430-2: 49"W. Overall insidewidth dimensions with armoptions: 430: 191⁄2"W430-2: 49"W
cSee Sidewalk multi-fabric diagram on page 215.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 23 Specify with acrylic backer. • Two-seat chair +$ 42 Specify with acrylic backer. • 17"D x 17"W and 17"D x 20"W +$ 12 Specify with acrylic backer. ottomans • 20"D x 26"W ottoman +$ 17 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Attachment Straps • 430 model +$ 65 Specify with attachment straps. • 430-2 model +$130 Specify with attachment straps.
Arms • Arms on 430 and 430-2 +$ 45 per arm Specify with arms. 3⁄4 yard or 14 sq. ft. required for COM/COL
Glides • “No Go” 1⁄2" polyethylene glides No cost Specify with “no go” glides.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: unibody construction with finger jointed plywood.• Upholstery: multiple densities of polyurethane foam and polyester fiber on ottoman/benches• Legs: 4799 Platinum Metallic powder coat steel with “Go” glides
1 Style number2 Fabric or leather color number for upholstery on ottoman/benches3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface Acrylic backerMaterial • 17"D x 24"W bench +$12 Specify with acrylic backer. • 17"D x 36"W bench +$17 Specify with acrylic backer. • 17"D x 48"W bench +$23 Specify with acrylic backer. • Ottoman +$30 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Glides • “No Go” 1⁄2" polyethylene glides No cost Specify with “no go” glides.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
DESIGN SCOTT WILSON & MINIMAL DESIGN ORIGIN: UNITED STATES
• Seat:fabric or leather• Back:3D knit• Base: 8040 Aluminum Matte Polished• Frame: steel tube• Glides: aluminum with non marring plastic insert• Swivel return mechanism• Lumbar pillow: fabric or leather• Ottoman: fabric or leather• Lounge tablet surface, if selected, 6000 Black or 6052 Milk• Lounge tablet arm support: paint to complement 8040 Aluminum Matte polished base
1 Style number2 Fabric or leather color number for seat or ottoman3 3D Knit color number for back: 5K20 Stone 5K21 Grey 5K23 Brown 5K24 Black 5K25 Garnet 5K26 Golden 5K27 Royal 5K28 Ivory 5K29 Coal4 Color number for lounge tablet surface, if selected: 6000 Black 6052 Milk5 Fabric or leather color number for lumbar pillow6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Chairs and ottoman +$237 Specify with fire code seating.
Lumbar pillow • Remove pillow –$230 Specify with no pillow.
Mechanism • Swivel-only mechanism No cost Specify with swivel-only mechanism. (omit return feature)
Related • Occasional and conference tables cSee Coalesse Conferencing and Storage Products Specification Guide.
Options U.S. Price Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Surface Lumbar pillow for lounge chairsMaterials • Fabric group 6 +$ 27 Specify fabric color number. • Fabric group 7 +$ 32 Specify fabric color number. • Fabric group 8 +$ 40 Specify fabric color number. • Fabric group 9 +$ 66 Specify fabric color number. • Fabric group 10 +$ 83 Specify fabric color number. • Fabric group 11 +$103 Specify fabric color number. • Fabric group 12 +$116 Specify fabric color number. • Fabric group 13 +$140 Specify fabric color number. • Fabric group 14 +$174 Specify fabric color number. • Leather group C +$257 Specify leather color number. • Leather group E +$264 Specify leather color number. • Customer’s Own Material (COM) +$ 41 Specify fabric color number. cSee Coalesse Surface Materials Reference Guide. • Customer’s Own Leather (COL) +$281 Specify leather color number. cSee Coalesse Surface Materials Reference Guide.
Required Selections U.S. Price Required to Specify
Tip: Lumbar pillow is standard.If the pillow is not desired, theoption of no pillow must bespecified.
• 1⁄2" thick top surface: - Laminate (Grade 1) with 3 mm edge band, if selected - Wood veneer (Grade 1) with matching 3 mm edge band, if selected - Corian, if selected: white only - Glass, if selected• 11⁄4" thick bottom substructure: black or milk• Base, column, and cone: 8040 Polished Matte Aluminum • Glides• Ships ready-to assemble
1 Style number with appropriate top series letter indicated in the space provided. (For example: COWX_Q42 becomes COWXLQ42 for a laminate top surface): L - Laminate top V - Wood veneer top C - Corian top G - Glass top2 Laminate, wood, or glass color number for top, if selected3 Plastic color for edge band of laminate top, if selected4 Bottom substructure: 6000 Black 6052 Milk5 Options, if selected (see below)cSee Coalesse Surface Materials ReferenceGuide.
Surface LaminateMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select color number. Wood • Grade 2 wood veneer Prices at right Specify with Grade 2 wood veneer and select color number. • Stain-to-Match No cost Specify with Stain-to-Match.
Wood Veneer • Lengthwise grain direction No cost Specify with lengthwise grain direction.Grain Direction for tops up to 96"L
Grommet with 42" square and 120"L tables (center only)Wire Management • One grommet +$ 201 Specify with one grommet with wire manager. 60" and 72" large round and square tables • One grommet +$ 201 Specify with one grommet with wire manager. • Two grommets +$ 402 Specify with two grommets with wire manager. 84" and 96" large round and square tables • Two grommets +$ 402 Specify with two grommets with wire manager. • Four grommets +$ 804 Specify with four grommets with wire manager. 72"L, 84"L, and 96"L tables (end (V-leg) location only) • One grommet +$ 201 Specify with one grommet with wire manager. 72"L, 84"L, 96"L, and 120"L tables (outer ends (V-legs) location only) • Two grommets +$ 402 Specify with two grommets with wire manager.
Tablets 42" square tables • Two tablets: black or milk plastic +$ 957 Specify with two tablets and select plastic color number. • Four tablets: black or milk plastic +$1914 Specify with four tablets and select plastic color number. 84"L rectangular tables • Six tablets: black or milk plastic +$2871 Specify with six tablets and select plastic color number. 84" square table and 120"L rectangular tables • Eight tablets: black or milk plastic +$3828 Specify with eight tablets and select plastic color number.
Related • SW_1 lounge cPage 216Products
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Tablets are an optional pickfor the 42" and 84" square and84"L and 120"L rectangulartables only. Tablets are availablein black or milk finish.
Veneer direction
Tip: Standard grain directionruns the width of the table(front-to back).
Tip: If grommet with wire man-ager is selected, the finish is notselectable, it will be the same asthe substructure finish choice.
Tip: Your specification is notcomplete until you add the fifthletter to the style number todefine top surface.
L - Laminate top V - Wood veneer top C - Corian top G - Glass top
cSpecification Information, continued from previous page
Tip: 96"L corian and glass tablesrequire a center in-line leg asstandard. The 96"L laminate andveneer tables do not require acenter in-line leg for support.Refer to base matrixcSee Coalesse Surface MaterialsReference Guide.
Tip: Your specification is notcomplete until you add the fifthletter to the style number todefine top surface.
L - Laminate top V - Wood veneer top C - Corian top G - Glass top
Contrasting fabric charges will apply. List price based on highest grade textile specified.
B
A
TO:
FROM:
DATE:
FAX....888.413.5161
Specify Model below:
COW412K Guest Chair with Glides
COW414K Guest Chair with Casters
COW612K Lowback Lounge Chair
COW712K Highback Lounge Chair
A
B
$121 U.S. list upcharge for each contrasting textile pricingbased on highest grade textile specified.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.See page 1 for details.
Steelcase October 2016
• Frame: unibody construction with finger jointed plywood.• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arm cushions• Legs: solid maple• Glides: 11⁄8" dia. non-adjustable metal
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Wood color number for legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All cushions are attached.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
DESIGN MICHAEL SHIELDS DESIGN ORIGIN: UNITED STATES
Lounge Seating
• Frame: unibody construction with finger jointed plywood.• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arm cushions• Base/legs: solid maple• Glides: 11⁄8" dia. non-adjustable metal
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Wood color number for base5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All cushions are attached.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
DESIGN MICHAEL SHIELDS DESIGN ORIGIN: UNITED STATES
d = Available in Rapid10.
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arm cushions• Legs: solid maple• Glides: 11⁄8" dia. non-adjustable metal
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Wood color number for legs 5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All cushions are attached.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Tablet not available onwood armcap models.
Tip: Tablet worksurface is 215⁄8" x 115⁄8".
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
DESIGN MICHAEL SHIELDS DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction with finger jointed plywood• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat, back, and arm cushions• Legs: solid maple• Glides: 11⁄8" dia. non-adjustable metal
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Wood color number for frame and legs5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All cushions are attached.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms4 Laminate color for tablet5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Soft casters are not available.
Tip: Wilsonart standard laminatecolors. cSee Coalesse Surface MaterialsReference Guide.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface Materials
Reference Guide.
Tip: Tablet worksurface is 215⁄8" x 115⁄8".
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
• Selected solid hardwood and wood veneer frame• Two seat with extension: tubular steel frame with solid hardwood arms - Arms are 4.5" wide• Upholstery: multiple densities of polyurethane foam and polyester fiber on seat back and arms
• Legs: matte chrome finish on steel• Arm bolster, if selected: fabric or leather
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat, back, and arms, or arm bolsters, if selected4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Due to seat conversionarms are 41⁄2"W. Lowered armhas weight limit of 500 lb.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
cFor multi-fabric diagram,see page 230.
Tip: Loose cushions standard.
Tip: Arm bolsters must be specified separately.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: 391-4 two seat with extensions, when extended: Both arms = 96”W overall One arm = 84”W overall Arms not extended = 71”Woverall (closed).
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair +$ 42 Specify with acrylic backer. • Two-seat chair +$ 74 Specify with acrylic backer. • Three-seat chair +$ 78 Specify with acrylic backer. • Two-seat chair with extensions +$ 93 Specify with acrylic backer. • Arm bolster +$ 8 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Attachment Straps • 391 +$126 Specify with attachment straps. • 391-2 +$252 Specify with attachment straps. • 391-3 +$378 Specify with attachment straps. • 391-4 +$252 Specify with attachment straps. • Bolster +$ 65 Specify with attachment straps.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
DESIGN PAMELA LIGHT, FIIDA SHIELDS DESIGN ORIGIN: UNITED STATES
• Frame: unibody construction with finger jointed plywood• Legs: maple or walnut wood• Upholstery: multiple densities of polyurethane foam• Double needle stitch on seams
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back4 Wood species5 Wood color number for legs6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All polyurethane foammeets CAL-117 specifications.
Tip: Pricing based on highestgrade textile specified.
Tip: Seats will always havesome comfort wrinkles. Theamount of wrinkles will varydepending on the fabric.
Tip: Welting COM yardagerequired = 1⁄2 yards or 22square feet.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt for welting +$187 Specify with contrasting welt and select around base of chair fabric color number.
Acrylic backer • Lounge chair +$ 51 Specify with acrylic backer. • Small sofa +$ 97 Specify with acrylic backer. • Medium sofa +$108 Specify with acrylic backer. • Long sofa +$118 Specify with acrylic backer. • Ottoman +$ 25 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • 693⁄4"W straight bench +$ 36 Specify with acrylic backer. without back • 961⁄2"W straight bench +$ 40 Specify with acrylic backer. without back • 263⁄4"D x 693⁄4"W benches +$ 49 Specify with acrylic backer. • 263⁄4"D x 961⁄2"W benches +$ 59 Specify with acrylic backer. • 693⁄4"D x 961⁄2"W benches +$ 95 Specify with acrylic backer. • 961⁄2"D x 961⁄2"W and +$108 Specify with acrylic backer. 693⁄4"D x 1231⁄4"W benches • 961⁄2"D x 1231⁄4"W bench +$118 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Back Offset • Back offset No cost Specify with back offset.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
• Upholstery for chair: fabric or leather• Glides
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to SpecifyTip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
cSee page 242 for multi-fabric diagram.
cSee page 243 for offset diagram.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Overall: 701⁄2"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
Overall: 971⁄4"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cTogether Bench, continued 237
Coalesse
Together Bench by Walter Knoll
DESIGN EOOS DESIGN ORIGIN: 2004 GERMANY
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued on next page
Specification Information
Overall: 701⁄2"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
Overall: 971⁄4"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
Overall: 701⁄2"D 1231⁄4"W 31"HSeat: 19"D 181⁄2"H
Overall: 971⁄4"D 1231⁄4"W 31"HSeat: 19"D 181⁄2"H
cSpecification Information, continued from previous pageTip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
cSee page 243 for offset diagram.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cTogether Bench, continued 239
Coalesse
Together Bench by Walter Knoll
DESIGN EOOS DESIGN ORIGIN: 2004 GERMANY
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued on next page
Specification Information
cSpecification Information, continued from previous page
Overall: 263⁄4"D 693⁄4"W 31"HSeat: 19"D 181⁄2"H
Overall: 263⁄4"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
Overall: 263⁄4"D 693⁄4"W 31"HSeat: 19"D 181⁄2"H
Overall: 263⁄4"D 961⁄2"W 31"HSeat: 19"D 181⁄2"H
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
cSee page 243 for offset diagram.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Topo lounge seating providesan alternative to typical loungeor guest seating for a morerelaxed work posture. Topolounge and lounge Jr. areequipped with glides.
Overall Seat Seat height Back height Footprint Diameter Height Depth Width from floor from seat
Lounge 24" 31" 18" 24" 17" 15" 26" x 26"
Lounge Jr. 24" 17" N.A. N.A. N.A. N.A. 26" x 26"
Mobile lounge 24" 31" 18" 24" 17" 15" 26" x 26"
Mobile lounge Jr. 24" 17" N.A. N.A. N.A. N.A. 26" x 26"
Actual Dimensions
Back is fully upholstered andprovides a more relaxed posture.
Four-arm base swivels.
Adjustable glides have anadjustability range of 1⁄2".
Lounge Jr. may be used as asmall-scale backless loungechair or an ottoman.
Seat is fully upholstered.
Back is fully upholstered.
Casters provide ease ofmobility. They are non-locking.
Mobile lounge Jr. may beused as a small-scale backlesslounge chair or an ottoman.
Topo mobile lounge seatingfeatures the modern geometricforms to create an alternativeto conventional swivel chairsand are appropriately scaledfor any lounge application.Topo mobile lounge and mobilelounge Jr. are equipped withcasters.
Steelcase October 2016
Customer’s OwnMaterial/Leather (COM/COL)Program is available. cSee Coalesse SurfaceMaterials Reference Guide for additional information.
Topo lounge is scaled to fitwithin workstations andswivels for impromptu meetings.
Topo mobile lounge is scaledfor 27"H meeting tables or tofit within workstations.
Multiple fabrics can be speci-fied on an individual unit for anadditional fee per specifiedfabric. A lounge or mobilelounge can have up to threeadditional fabrics. A lounge Jr.or mobile lounge Jr. can haveone additional fabric.
Lounge or mobile lounge • Seat cushion (includes side of seat cushion) - no additional fee
• Base frame - additional fee• Back cushion (inside back cushion) - additional fee
• Back frame (outside back panel) - additional fee
Lounge Jr. or Mobile lounge Jr.• Seat cushion (including sides of seat cushion) - no additional fee
• Base frame - additional feecSee Topo multi-fabric diagram and yardage request form, page 248.
Product Details
Lounge: Seat, back (inside and out-side) and base frame• Fabric
Four-arm base• Paint
Glides• Silver only
Mobile lounge: Seat, back (inside and out-side) and base frame• Fabric
Casters• Black plastic
Note: Refer to the CoalesseSurface Materials ReferenceGuide for additional surfacematerials information.
• Lounge - seat, inside back, outside back and base frame: fabric or leather
• Lounge Jr. - seat and base frame: fabric or leather• Four-arm swivel base: paint• Adjustable glides: silver only
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat, inside
back, outside back, and base frame, if selected4 Paint color number for base5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Contrasting upholstery on lounge Jr. • Contrasting fabric on +$121 Specify fabric color number for baseframe. base frame cSee Topo multi-fabric diagram and yardage request form, page 248.
Acrylic backer • Lounge +$ 30 Specify with acrylic backer. • Lounge jr. +$ 15 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: The COM yards and COLsquare footage listed on thispage reflect the requirementsfor a single fabric that are basedon non-directional 54"W mate-rial applied railroaded. Formulti-fabric COM require-ments, please refer to multi-fabric yardage.cPage 249
Tip: When specifying fabric indifferent price grades, the high-est price grade prevails.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
• Mobile lounge - seat, inside back, outside back and base frame: fabric or leather
• Mobile lounge Jr. - seat and base frame: fabric or leather• Non-locking casters: black plastic
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for seat, inside
back, outside back, and base frame, if selected4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Contrasting upholstery on lounge Jr. • Contrasting fabric on +$121 Specify fabric color number for baseframe. base frame cSee Topo multi-fabric diagram and yardage request form, page 248.
Tip: When specifying fabric indifferent price grades, the high-est price grade prevails.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: The COM yards and COLsquare footage listed on thispage reflect the requirementsfor a single fabric that are basedon non-directional 54"W mate-rial applied railroaded. Formulti-fabric COM require-ments, please refer to multi-fabric yardage.cPage 249
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Lounge Seating
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Non-standard fabric requirementsYardage requirements shown are based on non-directional 54"W material applied railroaded.Coalesse will apply fabric railroaded unlessinstructed otherwise on the dealer’s purchaseorder. The following conversion chart should beused to determine yardage requirements whenCOM has a repeat of 2" or more. Please contactCoalesse Customer Service for a yardage quota-tion if the fabric is less than 54" wide, has a repeatof more than 24" , or if the fabric must be cut-right.
CONVERSION CHART
PRODUCT REPEAT
2" - 8" 9" - 14" 15" - 24"
All other products 15% 25% 35%
Yardage quotations will also be provided for orderof 10 or more pieces.
Cutting direction guidelines
Cutting direction is based on the fabric width andthe way the fabric is cut from the roll and appliedto Coalesse products. There are two cutting direc-tions: railroaded or cut-right.
Horizontal or railroaded (across roll, warp hori-zontal) means fabric is cut across the roll; sel-vages are on the top and bottom.
Vertical or cut-right (down roll, warp vertical)means fabric is cut in the same direction it iswoven; selvages are on the left and right sides.
Coalesse reserves the right to railroad or applyfabric according to weave unless instructionsspecify otherwise. Fabrics are railroaded whenpossible to avoid seams in large upholstered areasand/or single cushion units. If a fabric is question-able, a cutting of adequate size showing full repeat(if any) should be sent to Coalesse for a fabricrequirement quotation.
• Frame: unibody construction with finger jointed plywood• Cast aluminum legs: powder coat paint • Upholstery: multiple densities of polyurethane foams and polyester fiber on seat and back• Upper and lower upholstery accents with double needle top stitch, if selected
1 Style number2 Fabric or leather color number for seat, back, and arms3 Upholstery accent color number, if selected4 Paint color number for legs: 4138 Graphite Gloss Black Matte 4141 Platinum Matte 4144 Black Gloss 4145 Milk Gloss 4148 Midnight Brown Gloss 4180 Graphite Matte 4193 Midnight Brown Matte 4242 Milk Matte 4710 Black Matte5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: All cushions are attached.
Tip: Recommended leathers areElmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Upholstery accent Prices to right Select accent upholstery.
backer.
Surface Acrylic backerMaterials • Lounge chairs with single fabric +$36 Specify with acrylic backer. • Lounge chairs with two fabrics +$42 Specify with acrylic backer. • Two-seat chairs with +$47 Specify with acrylic backer. single fabric • Two-seat chairs with +$53 Specify with acrylic backer. two fabrics • Three-seat chairs with +$55 Specify with acrylic backer. single fabric • Three-seat chairs with +$67 Specify with acrylic backer. two fabrics • Ottomans chairs with +$17 Specify with acrylic backer. single fabric • Ottomans chairs with +$17 Specify with acrylic backer. two fabrics • Two-seat benches chairs +$23 Specify with acrylic backer. with single fabric • Two-seat benches chairs +$23 Specify with acrylic backer. with two fabrics cSee Coalesse Surface Materials Reference Guide.
Options U.S. Price Required to Specify
Required Selections U.S. Price Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cLounge, continued 251
LessThanFiveDESIGN MICHAEL YOUNG DESIGN ORIGIN: HONG KONG
• Frame: constructed of carbon fiber• Finish: smooth paint• Hard glides
1 Style number2 Paint color number for frame3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface • 4233 Carbon Weave +$205 Specify with 4233 Carbon Weave.Materials • 4234 Blue Matte No cost Specify with 4234 Blue Matte. • 4235 Light Fade Matte No cost Specify with 4235 Light Fade Matte. • 4236 Dark Fade Matte No cost Specify with 4236 Dark Fade Matte. • 4237 Red Fade Gloss No cost Specify with 4237 Red Fade Gloss. • 4805 Copper Gloss No cost Specify with 4805 Copper Gloss.
Felt Glides • Soft felt glides No cost Specify with soft felt glides.
• Base: 8040 aluminum matte polished• Upholstery for chair: fabric or leather• Glides
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to SpecifyTip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
• Frame: hardwood plywood, steel tubing and bar stock • Arms: solid steel rod and bar stock• Upholstery: arms, back, and seat foam are molded around the frame components• Legs: matte chrome (M) or polished chrome (PC) leg finish
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Frame design allows backto flex to match occupant's backshape.
Tip: Due to the design and con-struction techniques of the CapaChair only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Chair stacks five high.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
CHS Color 3235 3229, 3236, 3237, 3238, 3239, 3246, 3248, 3251, 3253, 3267, 3268, and 3269
Wood Species/Finish Number Matrix
Specification Information
Standard Includes Required to Specify
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
• Upholstered seat cushion, if selected: fabric or leather• Non-upholstered seat, if selected: wood• Backrest: wood• Frame: black powder coat metal legs
1 Style number2 Fabric or leather color number for upholstery,
if selected3 Wood species/finish number, (See below)4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Metal Leg • Chrome +$ 58 Specify with chrome and select finish Finish number. • Stainless steel +$135 Specify with stainless steel and select finish number.
Style U.S. Base PricesNumber Fabric: Leather: COM Group 1 Group 2 Group 3 Group 4 Group 5 Loke Thor COL SIF Leather Leather Leather
CHS Color N.A. 3235 3228, 3229, 3236, 3237, 3238, 3239, 3246, 3248, 3251, 3253, 3267, 3268, and 3269
Wood Species/Finish Number Matrix
Options U.S. Price Required to Specify
Specification Information
Overall: 171⁄2"D 221⁄2"W 30"H
Tip: Not all finishes offered onevery wood species, see matrixbelow.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
• Frame: constructed of steel tubing• Seat and back: molded nylon, wood, or upholstery (wood is laminated layers of hard maple veneer)
1 Style number2 Fabric or leather color number for upholstery, if selected3 Plastic or wood finish color number for seat and back, if selected4 Base/frame finish: black gloss, white gloss, and silver metallic5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Due to the design and con-struction techniques of the EneaChair only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Contrasting fabric optionavailable on model 3501 only.
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: Need sketch for ganging.
Tip: Models 3501 and 3500 inwood are approved for CAL 133at no charge.
Tip: Tablet is 11"D x 9"W.
Tip: Arm chairs stack nine high.Arm chair with tablet stacks sixhigh.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair with upholstered +$ 17 Specify with acrylic backer. seat and back • Chair with upholstered +$ 8 Specify with acrylic backer. seat and wood back cSee Coalesse Surface Materials Reference Guide.
Ganging • Ganging +$ 66 Specify with ganging.
Tablet • Black powder coat +$343 Specify with tablet and specify side as facing.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Wood Seat and Back Stacker3500 $949 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
cSpecification Information, continued on next page
• Frame: steel tubing• Seat and back: molded nylon, wood, or upholstery (wood is laminated layers of hard maple veneer)
1 Style number2 Fabric or leather color number for upholstery, if selected3 Plastic or wood finish color number for seat and back, if selected4 Base/frame finish: black gloss, white gloss, and silver metallic5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: Due to the design and con-struction techniques of the EneaChair only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Armless chairs stack ninehigh.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Contrasting fabric optionavailable on model 3501S only.
Tip: No tablet or ganging available on armless models.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Chair with upholstered +$ 17 Specify with acrylic backer. seat and back • Chair with upholstered +$ 8 Specify with acrylic backer. seat and wood back cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Constructed of steel tubing with cast aluminum arms • Seat and back: polypropylene, wood, or upholstery (wood is laminated layers of hard maple veneer)• Foot rest with leg stretchers: chrome-plated
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery, if selected4 Plastic or wood finish color number for seat and back, if selected5 Base/frame finish: black gloss, white gloss, and silver metallic6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: Due to the design and con-struction techniques of the EneaBarstool only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Pricing based on highestgrade textile specified.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Contrasting fabric optionavailable on model 3511 only.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$ 121 per fabric Add suffix K to the style number and selectMaterials fabric color number.
Acrylic backer • Chair with upholstered +$ 12 Specify with acrylic backer. seat and back • Chair with upholstered +$ 6 Specify with acrylic backer. seat and wood back cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Constructed of steel tubing with cast aluminum arms • Seat and back: polypropylene, wood, or upholstery (wood is laminated layers of hard maple veneer)• Foot rest with leg stretchers: chrome-plated
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery, if selected4 Plastic or wood finish color number for seat and back, if selected5 Base/frame finish: black gloss, white gloss, and silver metallic6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number.
Acrylic backer • Chair with upholstered +$ 12 Specify with acrylic backer. seat and back • Chair with upholstered +$ 6 Specify with acrylic backer. seat and wood back cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: Due to the design and con-struction techniques of the EneaBarstool only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Pricing based on highestgrade textile specified.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Contrasting fabric optionavailable on model 3511S only.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Base/frame: steel tubing and base with non-skid strip• Seat and back: molded polypropylene, wood, or upholstery (wood is laminated layers of hard maple veneer)• Footrest: polished aluminum• Upholstered seat / back: Laminations of multiple density polyurethane foam and polyester fiber
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery, if selected4 Plastic or wood finish color number for seat and back, if selected5 Base/frame finish: black gloss, white gloss, and silver metallic6 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered..
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Stool with upholstered +$ 6 Specify with acrylic backer. seat and back • Stool with upholstered +$ 4 Specify with acrylic backer. seat and wood back cSee Coalesse Surface Materials Reference Guide.
Related • Café and conference tables cPage 338Products
Options U.S. Price Required to Specify
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Base/Frame: steel tubing and base with non-skid strip • Seat and back: molded polypropylene, wood, or upholstery (wood is laminated layers of hard maple veneer)• Footrest: Polished aluminum• Base/Frame Finishes: BKG = Black Gloss SM = Silver Metallic WH = White• Upholstered Seat / Back: Laminations of multiple density polyurethane foam and polyester fiber
1 Style number2 Plastic color number for seat and back3 Fabric or leather color number for upholstery4 Base/frame finish: black gloss, white gloss, and silver metallic5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: CAL 133 for polypropyleneis available as a special quote.Polypropylene color will changeslightly when FR treatment isapplied. Contact CustomerService for availability and pricing. Minimum quantity will apply.
Tip: Due to the design and con-struction techniques of the EneaBarstool only certain textiles canbe successfully applied, there-fore all COM fabrics must besubmitted to Coalesse forapproval prior to order acceptance.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
• Base and frame constructed of steel tubing• Seat and back: polypropylene• Insert, if selected: polypropylene or upholstery
1 Style number2 Plastic color number for seat and back: 003 White 0013 Sunset Orange 0014 Clover Green 0015 Sand 0016 Walnut Brown 0017 Cool Grey 0414 Anthracite Grey 0421 Blue 400 Black 409 Red3 Fabric or leather color number for upholstery insert, if selected4 Paint color number for base and frame: 4016 White 4017 Black 4216 Red 4217 Brown 4218 Platinum Silver5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Backer for chair with +$6 Specify with acrylic backer. upholstered insert cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: Poly- COM 6 7 8 9 10 11 12 13 14 COL C E propylene
Armless Chair with No InsertCOEL100 $358 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
cSpecification Information, continued on next page
Options U.S. Price Required to Specify
Specification Information
Overall: 203⁄4"D 203⁄4"W 301⁄2"HSeat: 18"H
Tip: Armless chair stacks 10high.
Overall: 203⁄4"D 203⁄4"W 301⁄2"HSeat: 18"H
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: CAL133 for polypropyleneand fire code seating are avail-able as a special quote. Polypro-pylene color will change slightlywhen FR treatment is applied.Contact Customer Service foravailability and pricing. Mini-mum quantity will apply.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Base and frame constructed of steel tubing• Seat and back: polypropylene• Arm cap: polypropylene• Insert, if selected: polypropylene or upholstery
1 Style number2 Plastic color number for seat, back, and arm cap: 003 White 0013 Sunset Orange 0014 Clover Green 0015 Sand 0016 Walnut Brown 0017 Cool Grey 0414 Anthracite Grey 0421 Blue 400 Black 409 Red3 Fabric or leather color number for upholstery insert, if selected4 Paint color number for base and frame: 4016 White 4017 Black 4216 Red 4217 Brown 4218 Platinum Silver5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Backer for chair with +$6 Specify with acrylic backer. upholstered insert cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: Poly- COM 6 7 8 9 10 11 12 13 14 COL C E propylene
Cantilever Arm Chair with No InsertCOEL200 $442 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
Cantilever Arm Chair with Polypropylene InsertCOEL200INSERT N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. $483
cSpecification Information, continued on next page
Tip: Cantilever arm can hook on table to provide storing option.
Tip: Cantilever arm stacks 6high.
Tip: Can specify arm cap in anyplastic color for Lottus.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: CAL133 for polypropyleneand fire code seating are avail-able as a special quote. Polypro-pylene color will change slightlywhen FR treatment is applied.Contact Customer Service foravailability and pricing. Mini-mum quantity will apply.
• Base and frame constructed of steel tubing• Seat and back: polypropylene• Arm: aluminum• Insert, if selected: polypropylene or upholstery
1 Style number2 Plastic color number for seat, back, and arm cap: 003 White 0013 Sunset Orange 0014 Clover Green 0015 Sand 0016 Walnut Brown 0017 Cool Grey 0414 Anthracite Grey 0421 Blue 400 Black 409 Red3 Fabric or leather color number for upholstery insert, if selected4 Paint color number for base and frame: 4016 White 4017 Black 4216 Red 4217 Brown 4218 Platinum Silver5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Backer for chair with +$6 Specify with acrylic backer. upholstered insert cSee Coalesse Surface Materials Reference Guide.
Felt Glides • Glides No cost Specify with felt glides.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: Poly- COM 6 7 8 9 10 11 12 13 14 COL C E propylene
Aluminum Loop Arm Chair with No InsertCOEL300 $477 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
cSpecification Information, continued on next page
Options U.S. Price Required to Specify
Specification Information
Tip: Arm chair stacks six high.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: CAL133 for polypropyleneand fire code seating are avail-able as a special quote. Polypro-pylene color will change slightlywhen FR treatment is applied.Contact Customer Service foravailability and pricing. Mini-mum quantity will apply.
• Base and frame constructed of steel tubing• Seat and back: polypropylene• Insert, if selected: Polypropylene or upholstery
1 Style number2 Plastic color number for seat and back: 003 White 0013 Sunset Orange 0014 Clover Green 0015 Sand 0016 Walnut Brown 0017 Cool Grey 0414 Anthracite Grey 0421 Blue 400 Black 409 Red3 Fabric or leather color number for upholstery insert, if selected4 Paint color number for base and frame: 4016 White 4017 Black 4216 Red 4217 Brown 4218 Platinum Silver5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Backer for chair with +$6 Specify with acrylic backer. upholstered insert cSee Coalesse Surface Materials Reference Guide.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: Poly- COM 6 7 8 9 10 11 12 13 14 COL C E propylene
Sled Base Counter-Height Stool with No InsertCOEL500 $523 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
cSpecification Information, continued on next page
Options U.S. Price Required to Specify
Specification Information
Overall: 18"D 181⁄4"W 341⁄2"HSeat: 261⁄4"H
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: CAL133 for polypropyleneand fire code seating are avail-able as a special quote. Polypro-pylene color will change slightlywhen FR treatment is applied.Contact Customer Service foravailability and pricing. Mini-mum quantity will apply.
Overall: 18"D 18"1⁄4"W 341⁄2"HSeat: 261⁄4"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Base and frame constructed of steel tubing• Seat and back: polypropylene • Insert, if selected: Polypropylene or upholstery
1 Style number2 Plastic color number for seat and back: 003 White 0013 Sunset Orange 0014 Clover Green 0015 Sand 0016 Walnut Brown 0017 Cool Grey 0414 Anthracite Grey 0421 Blue 400 Black 409 Red3 Fabric or leather color number for upholstery insert, if selected4 Paint color number for base and frame: 4016 White 4017 Black 4216 Red 4217 Brown 4218 Platinum Silver5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Chair with upholstered insert +$ 6 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
• Polished trivalent chrome ring +$62 Specify with trivalent chrome ring.
Related • Café and conference tables cPage 338Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: Poly- COM 6 7 8 9 10 11 12 13 14 COL C E propylene
Post Base Counter-Height Stool with No InsertCOEL700 $1012 N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A.
Post Base Counter-Height Stool with Polypropylene InsertCOEL700INSERT N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. N.A. $1041
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Overall: 193⁄4"D 193⁄4"W 341⁄2"HSeat: 261⁄4"H
Overall: 193⁄4"D 193⁄4"W 341⁄2"HSeat: 261⁄4"H
Tip: Post stool seat swivels.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: CAL133 for polypropyleneand fire code seating are avail-able as a special quote. Polypro-pylene color will change slightlywhen FR treatment is applied.Contact Customer Service foravailability and pricing. Mini-mum quantity will apply.
KathrynDESIGN STUDIO B DESIGN ORIGIN: UNITED STATES
• Frame: European beech hardwood• Mortise and tenon joinery• Upholstery: Multiple densities of laminated polyurethane foam and polyester fiber• Glides: non-adjustable
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Wood color number for frame5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number. • Contrasting welt +$137 Specify with contrasting welt and select fabric color number.
Acrylic backer • Chair with open back +$ 8 Specify with acrylic backer. • Chair with upholstery +$ 12 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Wood with Open Back2540-1 $ 997 $ 991 $1002 $1008 $1022 $1035 $1074 $1102 $1138 $1212 $1257 $1541 $1609
• Upholstery for stool: fabric or leather• Frame: polished trivalent chrome
1 Style number2 Fabric or leather color number for upholstery3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
• Shell: plastic• Base: 8046 Polished Aluminum• Seat: fixed upholstery with polyurethane foam base• Back: fixed upholstery with polyurethane foam base, if selected• Swivel mechanism• Glides: plastic
1 Style number2 Plastic color number for shell: 6345 Black 6346 White3 Fabric or leather color number for upholstery 4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Chair with upholstered seat +$ 6 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide. • Chair with upholstered +$10 Specify with acrylic backer. seat and back
Felt Glides • Glides No cost Specify with felt glides.
Related • Stools cPage 290Products
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Chair with Upholstered Seat and BackCOLX110 $1412 $1412 $1420 $1435 $1478 $1506 $1539 $1562 $1602 $1658 $1649 $1756 $1797
COM/yds = 11⁄4, COL/sq ft = 22
Options U.S. Price Required to Specify
Specification Information
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Due to the design and construction techniques of theLox chairs only certain textilescan be successfully applied,therefore all COM fabrics mustbe submitted to Coalesse forapproval prior to order acceptance.
Tip: Textile patterns for chairwith upholstered back willrequire seams on the insideback of the chair. Limited solidtextiles or leathers may alsorequire seams. For specific tex-tile information, visit the fabricdatabase at www.coalesse.com.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
1 Style number2 Plastic color number for shell: 6347 Black Gloss 6348 White Gloss3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Due to the design and construction techniques of theLox stools only certain textilescan be successfully applied,therefore all COM fabrics mustbe submitted to Coalesse forapproval prior to order acceptance.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Upholstery Version • Wood shell Price below Specify with wood seat and back. • Wood shell with upholstered seat Prices at right Specify with upholstered seat, wood back. • Wood shell with 3⁄4 upholstery Prices at right Specify with 3⁄4 upholstered. • Fully upholstered Prices at right Specify with upholstered seat and back.
Contrasting Fabric • Non contrasting fabric No cost Specify with non contrasting fabric.on 3⁄4 and Fully • Contrasting fabric +$121 Specify with contrasting fabric.Upholstered
Base Type • 4-leg No cost Specify with 4-leg. • Sled base +$ 51 Specify with sled base.
Surface Materials Base • Polished trivalent chrome base +$ 51 Specify with polished trivalent chrome.
Shell • Grade 1 wood veneer No cost Specify with VP01 Oak Light, VP03 Black Oak, or VP05 White Oak. • Grade 2 wood veneer +$ 62 Specify with VP02 Smoked Oak or VP04 Grey Oak.
Acrylic Backer • Seat +$ 8 Specify with acrylic backer.
• Seat and back +$ 17 Specify with acrylic backer.
Related Products • Tables cPages 356–358
Style U.S. Base PriceNumber
Wood Shell ChairCOSFZCH Seat $538
cSpecification Information, continued on next page
Required Selections U.S. Price Required to Specify
Options U.S. Price Required to Specify
Specification Information
• Seat and back: upholstery, if selected• Shell: wood shell, wood shell with upholstered seat, or
3⁄4 upholstery with wood shell, if selected: wood veneer grade 1
• Base: paint • Glides
1 Style number2 Upholstery version (see below under Required
Selections)3 Contrasting fabric on 3⁄4 or fully upholstered, if
selected (see below under RequiredSelections)
4 Fabric and/or leather color number for seatand/or back, if selected
5 Wood finish on shell, if selected6 Base type (see below under Required
Selections)7 Paint color number for base8 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Chairs stack six high.
Tip: Leathers will appear loosewith comfort wrinkles whenupholstered.
Tip: For Customer's OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information.cSee Coalesse SurfaceMaterials Reference Guide andonline fabric database at http://fabric.coalesse.com.
Chair with sled base
Overall: 201⁄2"W x 201⁄2"D x 31"H
Seat: 171⁄2"H
COM yardage:Seat: 3⁄4 yards3⁄4 back: 3⁄4 yards
Fully uph. back: 11⁄4 yards
COL yardage:Seat: 8 yards3⁄4 back: 16 yards
Fully uph. back: 19 yards
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Guest/S
ide/Stack
Seating
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Application • Counter height No cost Specify with counter height.• Bar height +$ 51 Specify with bar height.
Upholstery Version • Wood shell Price below Specify with wood seat and back.• Wood shell with upholstered seat Prices at right Specify with upholstered seat and wood back.• Fully upholstered Prices at right Specify with upholstered seat and back.
Contrasting Fabric • Non contrasting fabric No cost Specify with non contrasting fabric.on Fully Upholstered • Contrasting fabric +$ 121 Specify with contrasting fabric.
Surface Materials Base• Polished trivalent chrome base +$ 77 Specify with polished trivalent chrome.
Shell• Grade 1 wood veneer No cost Specify with VP01 Oak Light, VP03 Black Oak,
or VP05 White Oak. • Grade 2 wood veneer +$ 62 Specify with VP02 Smoked Oak or VP04
Grey Oak.
Acrylic Backer• Seat +$ 8 Specify with acrylic backer.• Seat and back +$ 17 Specify with acrylic backer.
Related Products • Tables cPages 356–358
Style U.S. Base PriceNumber
Wood Shell StoolCOSFZST $743
cSpecification Information, continued on next page
Required Selections U.S. Price Required to Specify
Options U.S. Price Required to Specify
Specification Information
• Seat and back upholstery, if selected • Shell: wood shell or wood shell with upholstered
SW_1 Guest SeatingDESIGN SCOTT WILSON & MINIMAL DESIGN ORIGIN: UNITED STATES
• Seat:fabric or leather• Back:3D knit• Base: 8040 Aluminum Matte Polished• Frame: steel tube• Glides: aluminum with non marring plastic insert• Casters, if selected: dual wheel hard casters, black only• Swivel return mechanism on guest chair, if selected• Swivel mechanism on conference chair, if selected
1 Style number2 Upholstery color number for seat3 3D Knit color number for back: 5K20 Stone 5K21 Grey 5K23 Brown 5K24 Black 5K25 Garnet 5K26 Golden 5K27 Royal 5K28 Ivory 5K29 Coal4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Fire code seating • Fire code seating +$237 Specify with fire code seating.
Mechanism • Swivel-only mechanism No cost Specify with swivel-only mechanism. (omit return feature)
Casters • Black soft casters +$ 23 Specify with soft casters. • Hard black casters with polished +$ 69 Specify with hard polished aluminum casters. aluminum body • Soft black casters with polished +$104 Specify with soft polished aluminum casters. aluminum body
Related • Occasional and conference tables cSee Coalesse Conferencing and Storage Products Specification Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: Constructed of steel tubing and bar stock• Arms: solid steel rod and bar stock• Upholstery: Back and seat are molded foam and fiber • Legs: matte chrome (M) or polished chrome (PC) leg finish
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
Acrylic backer • Armless chair and lowback +$ 17 Specify with acrylic backer. sledbase • Highback sledbase +$ 19 Specify with acrylic backer. • Arm chair +$ 25 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information cSee Coalesse Surface MaterialsReference Guide.
Tip: Pricing based on highestgrade textile specified.
Tip: Steel springs allow back toflex to match occupant's backshape.
Tip: Upholstered arm caps fit firmly on arms in coordinating textiles, COM yardage required1⁄4 yards, COL square feet required 51⁄2 (1519 and 1529only).
Tip: Glide on sled base chair hasa felt pad made for hard floors.Movement on carpet is moredifficult.
• Frame: Constructed of steel tubing and bar stock. • Upholstery: back foam are molded around the frame components. • Seat foam is molded with "comfort pockets"• Legs: matte chrome (M) or polished chrome (PC) leg finish
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Recommended leathers are Elmosoft Grade C andElmorustical Grade E.
Tip: Special color match, consultCustomer Service.
Tip: Pricing based on highestgrade textile specified.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and select Materials fabric color number.
• Upholstery for chair: fabric or leather• Frame: polished trivalent chrome
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Stacking is not recom-mended as the frame will dentthe foam on the seat on which itis being stacked.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Surface • Contrasting fabric +$121 per fabric Add suffix K to the style number and selectMaterials fabric color number.
BinduDESIGN BRIAN KANE DESIGN ORIGIN: 2009 UNITED STATES
• Bent plywood frame• Chair: fabric• Molded polypropylene foam• Frame (Guest/Side): 4144 Black Gloss• Base (Desk and Conference): 6205 Black Resin• Dual wheel hard casters, desk and conference• Glides: black, non-marring, guest• Back tilt lock
1 Style number2 Fabric or leather color number for upholstery3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backer Materials • Low back and mid back chair +$ 30 Specify with acrylic backer. • High back chair +$ 32 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Base • 8046 Polished Aluminum +$151 Specify with 8046 Polished Aluminum. (available on CO300 & CO400) • 9207 Polished Trivalent Chrome +$151 Specify with 9207 Polished Trivalent Chrome. (available on CO200G & CO300G)
Casters • Soft casters (available on +$ 24 Specify with soft casters. CO300 & CO400)
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
cSpecification Information, continued from previous page
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Desk and C
onferenceS
eating
Steelcase October 2016
Surface Welt detail Materials • Contrasting fabric welt +$ 64 Specify with contrasting fabric welt and select fabric color number. • Contrasting leather welt +$ 93 Specify with contrasting leather welt and select fabric color number. • Contrasting fabric +$121 per fabric Add suffix K to the style number and select fabric color number.
Acrylic backer • Conference, midback, and +$ 19 Specify with acrylic backer. high back large chairs • High back large chair +$ 23 Specify with acrylic backer. • Midback with pillow chairs +$ 30 Specify with acrylic backer. • High back with pillow chairs +$ 32 Specify with acrylic backer. cSee Coalesse Surface Materials Reference Guide.
Base • Polished aluminum with black, +$ 64 Specify with polished aluminum base. hooded dual wheel casters
ChordDESIGN MICHAEL SHIELDS DESIGN ORIGIN: UNITED STATES
• Frame: hardwood plywood assembled into unibody structures utilizing interlocking finger joinery• Cushioning: - back: multiple laminations of high-density polyurethane foam over an elastic sheet suspension system for lumbar support - seat: closed cell, contour molded urethane foam• Upholstery: - seams are double needle stitched with seam binding for extended durability - unique wrap around welt detail and is cut from the same fabric as specified on chair• Arms: resilient self-skinned urethane molded around carbon steel armature, black or aluminum arm with urethane cap, if selected• Chair controls: tilt-swivel with tilt tension, pneumatic height adjustment, and tilt lockout• Bases: five star black resin• Casters: black hooded dual wheel
1 Style number2 Number of fabrics if contrasting fabric style number is selected3 Fabric or leather color number for upholstery on seat and back4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer’s OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering informationcSee Coalesse Surface MaterialsReference Guide.
Tip: Arm is cast from 100%recycled material then handbuffed to a mirror finish. Armcaps are molded in black.
Tip: List price based on highestfabric grade usage.
Tip: Contrasting option availableonly on 798-P and 796-P.
Tip: Chord does not pass CAL 133 with urethane arms. Tochoose the CAL 133 option pol-ished aluminum arms must beselected.
Polished aluminum loop armis contoured for comfort and isavailable on mid-back chairsonly. Optional upholstered armcaps are available.
Duvet conference chairupholstery features a duvetstitching technique accentedwith comfort wrinkles on thechair's inner back.
Back tension adjustmentoffers two settings to allowthe user to adjust the rate ofincrease or decrease in forceas the user reclines. Turnlever forward to increase ten-sion. Turn lever back todecrease.
Casters have hard, dual-wheels that roll smoothly oncarpets. Soft casters areavailable for use on hardfloors and chair mats. Castershave been designed to roll quietly and have roll control.
Seat height adjustmentallows users to change seatheight within a 5" range withthe assistance of a pneumaticgas cylinder.
Recline adjustment allowsuser to choose from threerecline positions: full-tilt, mid-stop, and full upright positions.
Conference and duvet conference chairs featuredifferent upholstery tech-niques expressed through theunique geometry on eachchair's inner back.Note: These techniques apply tomid- and low-back chairs withboth loop and integrated arms.
5-star base is standard onmid-back chair with loop arm.
Synchro-tilt mechanism isweight activated and automati-cally responds to reclineresistance proportionate to theuser's weight. The chair andback move in a 3:1 ratio.
Note: Upholstery details applyto mid- and low-back chairswith both loop and integratedarms.
Seamless Upholstery
Outer back seams are notrequired on conference andduvet conference chairs withseamless upholstery selection.
Inner back vertical seamsare not required on confer-ence chairs with seamlessupholstery selection.
Seamed Upholstery
Outer back seams arerequired on conference andduvet conference chairs withseamed upholstery selection.
Product Details
Inner back vertical seams are required on conferencechairs with seamed upholsteryselection.Note: Duvet conference chairswith loop arms always havehorizontal inner back seams, butvertical seams are not required.Conference and duvet confer-ence chairs with integrated armsalways have vertical inner backseams.
Seamed Upholstery:• Any upholstery not listed above will require seams.
Customer’s OwnMaterial/Leather (COM/COL)Program is available. cSee Coalesse Surface MaterialsReference Guide for additionalinformation.
Coalesse Design Group andJean-Marie Massaud
Surface Materials
Programs & Services
Designers
Coalesse
Massaud Conference SeatingDESIGN COALESSE DESIGN GROUP AND JEAN-MARIE MASSAUD DESIGN ORIGIN: FRANCE
Desk and C
onferenceS
eating
Inner back vertical seam isstandard on chairs with integrated arms.
4-star base is standard on lowand mid-back chairs with inte-grated arm. Base is polishedaluminum with glides. Seat isfixed height with a swivel onlymechanism.
Integrated arm follows theelegant curve and profile of thechair and is available on lowand mid-back chairs.
5-star base is optional onchairs with integrated arm.Includes synchro-tilt mechanism with pneumaticheight, tension, and reclineadjustments.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse
Massaud Conference SeatingDESIGN COALESSE DESIGN GROUP AND JEAN-MARIE MASSAUD DESIGN ORIGIN: FRANCE
• Base: polished alumium• Inner back and seat: - Conference chair, if selected: horizontal single needle stitching detail on inner back - Duvet conference chair, if selected: comfort wrinkles on inner back• Outer back and inner back: see upholstery understanding on page 309 for seaming placement based on upholstery selection• Arms: - Loop arms (without arm caps), if selected: polished
aluminum - Integrated arms, if selected: fully upholstered• Pneumatic height adjustment and synchro-tilt mechanism• 5-star base with casters: – Mid-back chair with loop arms, if selected: dual wheel hard caster: black – Chairs with integrated arm and 5-star base, if selected:
dual wheel hard caster: black• Glides, if 4-star base selected on chairs with integrated
arms
1 Style number2 Fabric or leather color number for upholstery on seat, inner, and outer back 3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: For duvet conferencechairs, fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: For Customer's OwnMaterial or Leather, see neces-sary requirements, importantprocessing instructions, andordering information.cSee Coalesse Surface MaterialsReference Guide and online fabricdatabase at http://fabric.coalesse.com
Tip: Pneumatic height adjust-ment allows user to change seatheight, with the assistance of apneumatic gas cylinder.Synchro-tilt mechanism hasthree recline positions and twotension positions.
Tip: Faux leathers and vinyls arenot recommended on arm capupholstery.
Tip: Loop arms can be adjustedout 1" on either side. Requirestools and must be done by afacility manager.
Tip: Soft wheel casters are grey.
Surface • Contrasting inner back +$121 Specify with contrasting inner back. Materials • Contrasting outer back +$121 Specify with contrasting outer back. • Contrasting seat +$121 Specify with contrasting seat. • Contrasting all target surfaces +$242 Specify with contrasting all. cSee Coalesse Surface Materials Reference Guide.
cSpecification Information, continued on next page
Specification Information
Steelcase October 2016
With 4-star base With 5-star baseOverall: 243⁄4"W x 221⁄2"D x 311⁄2"–333⁄4"H Overall: 243⁄4"W x 23"D x 311⁄2"–363⁄4"HInside: 233⁄4"W x 18"D Inside: 233⁄4"W x 18"DSeat:18"H Seat: 163⁄4"–213⁄4"HArm: 261⁄2"H Arm: 241⁄2"–293⁄4"H
Style U.S. Base PricesNumber Fabric Grades: Leather Grades:
With 4-star base With 5-star baseOverall: 243⁄4"W x 221⁄2"D x 311⁄2"–333⁄4"H Overall: 243⁄4"W x 23"D x 311⁄2"–363⁄4"HInside: 233⁄4"W x 18"D Inside: 233⁄4"W x 18"DSeat: 18"H Seat: 163⁄4"–213⁄4"HArm: 261⁄2"H Arm: 241⁄2"–293⁄4"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Desk and C
onferenceS
eatingCoalesse
Massaud Conference SeatingDESIGN COALESSE DESIGN GROUP AND JEAN-MARIE MASSAUD DESIGN ORIGIN: FRANCE
With 4-star base With 5-star baseOverall: 243⁄4"W x 241⁄2"D x 401⁄4"H Overall: 243⁄4"W x 25"D x 381⁄4"–431⁄2"HInside: 191⁄4"W x 18"D Inside: 191⁄4"W x 18"DSeat:18"H Seat: 163⁄4"–213⁄4"HArm: 261⁄2"H Arm: 241⁄2"–293⁄4"H
Style U.S. Base PricesNumber Fabric Grades: Leather Grades:
With 4-star base With 5-star baseOverall: 243⁄4"W x 241⁄2"D x 401⁄4"H Overall: 243⁄4"W x 25"D x 381⁄4"–431⁄2"HInside: 191⁄4"W x 18"D Inside: 191⁄4"W x 18"DSeat: 18"H Seat: 163⁄4"–213⁄4"HArm: 261⁄2"H Arm: 241⁄2"–293⁄4"H
Active mechanism (AM+)allows the seat and back angleto be adjusted independentlyof each other. The seat can belocked at various angles, andthe back can free tilt withadjustable tension or lock infour positions.
Arms, height adjustable allowthe user to independentlymove each arm up and down.
Arms, width-adjustable allowsthe arm rests to be adjusted inand out.
Arms, folding allows the userto independently fold eacharm up or down for total free-dom of leg movement andposture accommodation.
Back, height adjustable allowsthe user to raise or lower thechair back within a givenrange.
Back lock, forward allows theuser to lock the backrest in afull upright position or releaseit to recline.
Back stop, selective allowsthe user to lock and unlock thebackrest in any position withinthe tilt range.
Back tilt tension adjustmentregulates the ease of tiltmovement of the back only.
Back and seat tilt (Your Power mechanism) automati-cally responds to the weightand seating position of theuser with an individual backresistance.
Base, free swivel allows chairto swivel 360°.
Base, memory-return swivelallows a chair to swivel 360°,but return to the forward-fac-ing position when released.
Base, nesting four-prong hastwo front legs that are lowerthan the two rear legs, allow-ing chairs to nest for storage.A nylon tooth on the baseengages a notch in the seatwhen folded. This engagementproperly aligns the seat andbase for nesting.
Folding seat allows the seatto flip up, while the chairautomatically rises for nestingand storage.
Knee tilt control (low frontrise) minimizes the rise of thefront of the seat when thechair is in a reclined position,allowing the users’ feet toremain on the floor. This fea-ture reduces pressure underthe thighs, allowing for contin-uous blood circulation.
Lumbar support, adjustableprovides additional lower backcomfort by allowing the userto move the lumbar supportup or down, as well asincrease or decrease theamount of support.
Passive mechanism (PM)allows the seat and back tomove in synchronization with-out manual adjustment.
Pneumatic height allows theuser to change the seat heightassisted by a pneumatic gascylinder.
Seat angle adjustment allowsthe user to change and lockthe seat angle in various positions.
Seat depth, adjustable allowsthe user to slide the seat for-ward or back within a setrange.
Seat tilt control allows theseat and back to rotate as aunit backward one positionand forward two positions.
Seat, zero front rise allowsthe user to tilt back in thechair while feet remain on thefloor because the seat frontremains level.
Swivel-tilt mechanism con-trol allows the chair to swivel360° and the fixed seat andback to tilt in unison when theuser leans back.
Synchro-tilt mechanismsynchronizes the tilting move-ment of the seat and back in aset ratio.
Tilt tension adjustment allowsthe user to vary the amount ofrecline resistance. YourPower mechanism allows theback and seat tilt to adjustautomatically to the weightand seating position of theuser.
Your Preference controlallows the user to adjust theback tilt by selecting one offour settings: weight acti-vated, weight activated with20% resistance boost, mid-stop recline, and upright backlock.
AvonG4/18DESIGN JIM BAREFOOT DESIGN ORIGIN: UNITED STATES
• Frame: solid maple with dowels and corner braces for structural integrity• Glides: polyethylene• Top: - Finesse: 3⁄4" thick, double radius edge with Finesse applied - Wood: 3⁄4" thick, double radius on solid maple edge with selected maple veneer applied
1 Style number2 Finesse or wood color number for top3 Frame finish4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: No frame sold separately.
Tip: Interport power/data mod-ule is not available on Avon.
Surface TopMaterials • Contrasting wood top +$191 Specify with contrasting wood top.
Dimensions Style U.S. Base PricesD W H Number Top Surface: Finesse Wood
20" 20" 161⁄2" 192020F G4/18 $1192 N.A.
20" 20" 161⁄2" 192020W G4/18 N.A. $1467
20" 30" 161⁄2" 192030F G4/18 $1260 N.A.
36" 36" 161⁄2" 193636F G4/18 $1724 N.A.
24" 48" 161⁄2" 192448F G4/18 $1533 N.A.
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Freestanding table frame: silver • Connector table frame: panels are black, white, or gray• Top: High-Pressure Laminate top with matching 3 mm edge band• Glass top (tablet): - 1⁄2" thick - Radiused edges• Ganging plate: 1⁄4" thick ganging plates attach to the bottom of units to the seating unit plates
1 Style number2 Laminate top and tablets, if selected: 2595 Black 2730 Arctic White 290N North Sea3 Glass color number for top, if selectedcSee Coalesse Surface Materials Reference Guide.
Tip: Await connector tables arenot recommended to be used inend-of-run applications.
Tip: Await connector tables arenot made for ganging to Awaitmobile ottoman.
Style U.S. PricesNumber Top Surface: Laminate Clear Green/ Absolute Clear/ Colored Clear Green Frosted Clear Frosted Glass Top Glass Top Glass Top
Freestanding High Round Table46-T2 $1403 $1613 $1637 $1809
Style U.S. PricesNumber Laminate Top: Glass Tablet: No Tablet Tablet and Clear Green/ Clear Green / Absolute Clear/ Absolute Clear/ Colored Colored Tablet Power/ Clear Green Clear Green Clear Frosted Clear Frosted Glass Tablet Tablet and Data Frosted Frosted Glass Tablet Tablet and Power/Data Glass Tablet Tablet and Power/Data Power/Data
Side table offers a freestand-ing, mobile tablet surface. Thetripod base allows it to bepositioned close to a seatingunit. The top is available invinyl.
Side table surface and basecover• Bronco onyx vinyl
• Top: - Laminate top (Grade 1 laminates) with matching plastic edge - Laminate top (Grade 1 Steelcase) with contrasting plastic edge - Wood top with matching flat wood edge• Base: textured paints only• Grommet, if selected: black plastic only
1 Style number2 Laminate or wood color number for top3 Plastic edge color number for top with Grade
1 Steelcase or Grade 2 laminate, if selected4 Textured paint color number for base5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Bob TablesDESIGN PEARSON LLOYD DESIGN ORIGIN: 2007 GERMANY
Glides • Felted glides +$16 Specify with felted glides.
Dimensions Style U.S. Base PricesDia H Number Top Surface: Clear Clear Green Absolute Absolute Colored Green Laminated/ Clear Frosted Clear Glass Frosted Appearance
Bob TablesDESIGN PEARSON LLOYD DESIGN ORIGIN: 2007 GERMANY
Dimensions Style U.S. Base PricesDia H Number Top Surface: Clear Clear Green Absolute Absolute Colored Green Laminated/ Clear Frosted Clear Glass Frosted Appearance
• Frame/legs: painted aluminum• Tops - Laminate: 1⁄2" thick top - Wood: veneer, oak, or walnut 1⁄2" thick top - Solid surface: 1⁄2" thick top: Glacier White only - Back painted glass: 1⁄2" thick top• Leg inserts: - Solid surface, 1⁄4" thick - Hardwood, 1⁄4" thick• Glides: non-adjustable, ships with felt option
1 Style number2 Metal color number for frame/leg 4141 Platinum Matte 4180 Graphite Matte 4193 Midnight Brown Matte 4242 Milk Matte 4710 Black Matte3 Color or finish number for top selection4 Leg insert finish in solid surface or hardwood oak or walnut5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Veneer Veneer White Back Grade 1 Grade 2 Solid Painted Surface Glass
• Frame/legs: hardwood oak• Tops - Laminate: 1⁄2" thick top - Wood: veneer, oak, or walnut 1⁄2" thick top - Solid surface: 1⁄2" thick top: Glacier White only - Back painted glass: 1⁄2" thick top• Leg inserts: solid surface, 1⁄4" thick• Glides: non-adjustable, ships with felt option
1 Style number2 Wood color number for frame/legs3 Color or finish number for top selection4 Leg insert finish: 2801 Glacier White 2010 Black 2011 Midnight Brown 2012 Blue 2013 Red5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Frame/legsMaterials • Walnut +$172 Specify with frame/leg in walnut and select finish number.
Dimensions Style U.S. Base PricesD W H Number Top Surface: Laminate Veneer Veneer White Back Grade 1 Grade 2 Solid Painted Surface Glass
Tip: These colors are differentthan other Coalesse powdercoats.
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Style U.S. Number Base Price
30° Freestanding Low Table with Four Legs45-T3730L $1962
30° Freestanding High Table with Four Legs45-T3730H $2630
60° Freestanding Table–Planter with Five Legs45-T7460HP $5235
Specification Information
Options U.S. Price Required to Specify
1 Style number2 Wood color number for legs and frame3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Overall: 291⁄2"D 365⁄8"W 81⁄2"H
Overall: 29"D 3611⁄16"W 221⁄2"H
Overall: 331⁄4"D 703⁄4"W 221⁄2"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Tip: These colors are differentthan other Coalesse powdercoats.
Tip: The round plate that housesthe power/data module is pow-der coated to complement thepower/data module finish. Forthe black anodized aluminummodule, the round plate will bepainted in 4135 Matte Black.For the silver anodized alu-minum module, the round platewill be painted 4799 Platinum.
Glass Insert • Green tinted glass insert for +$254 Specify with glass insert. round table 3⁄4" thick with white enamel bottom square edge detail
Metal Legs • Powder coat steel legs +$138 per leg Specify with powder coat steel legs and specify color number: 4138 Graphite Gloss 4140 Arctic White Gloss 4142 Platinum Gloss 4144 Black Gloss 4148 Midnight Brown Gloss Gunmetal Silver Gloss
Power/Data Module • Two power/two data ports +$377 Specify finish color number.(45-T42RD only) for round table only black anodized aluminum or silver anodized aluminum
Style U.S. Base PricesNumber Walnut or Maple Sunburst Top
Freestanding Round Table45-T42RD $3551 $3826
Freestanding High Wedge Table45-T1815H $2125 N.A.
Freestanding High Straight Table45-T1300H $2506 N.A.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
• Frame/top: hard maple veneer• Glass top models: - 47-T17ELG and 47-T17RG1 models consist of two Diekman wood bases (47-T2617D and 47T2217E) with elliptical or rectangular glass tops - 1⁄2" thick clear glass top with radiused corners• Glides: polyethylene, non-adjustable
1 Style number2 Top color number3 Frame finishcSee Coalesse Surface Materials Reference Guide.
Tip: Interport power/data mod-ule is not available on Diekman.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Glass Wood
• Laminate top: 3⁄4" thick with T-mold edge band• Wood top: 3⁄4" thick with maple edge and maple veneer• Base/frame: steel tubing and base: paint • Glides: non-skid
1 Style number2 Laminate or wood top color number3 Plastic color for edge band of laminate top, if
selected:6D10 Silver Metallic6D11 Black6D12 White
4 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4018 Silver MetalliccSee Coalesse Surface Materials Reference Guide.
Dimensions Style U.S. PricesDiameter H Number Top Surface: Laminate Wood
Occasional36" 18" H35-T3618L $ 966 N.A.
36" 18" H35-T3618W N.A. $1337
42" 18" H35-T4218L $1163 N.A.
42" 18" H35-T4218W N.A. $1911
Conference30" 30" H35-T3030L $1137 N.A.
30" 30" H35-T3030W N.A. $1771
36" 30" H35-T3630L $1197 N.A.
36" 30" H35-T3630W N.A. $1971
42" 30" H35-T4230L $1377 N.A.
42" 30" H35-T4230W N.A. $2129
54" 30" H35-T5430L $2188 N.A.
54" 30" H35-T5430W N.A. $3450
60" 30" H35-T6030L $2191 N.A.
60" 30" H35-T6030W N.A. $3739
cSpecification Information, continued on next page
Specification Information
Standard Includes Required to SpecifyTip: Shipped knocked down.
Tip: Disc bases are 24” diameter for 30", 36", and 42"diameter tables. Disc bases are311⁄2" diameter for 54" and 60"diameter tables.
Tip: White laminate tops mayexhibit slightly visible blackspecks inherent to the top manufacturing process.
• Base/frame: steel tubing and base: paint• Glides: non-skid• Disc bases are 24” diameter• Laminate top: 3⁄4" thick with T-mold edge band• Wood top: 3⁄4" thick with maple edge and maple veneer
1 Style number2 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4018 Silver Metallic3 Plastic color for edge band of laminate top, if
selected:6D10 Silver Metallic6D11 Black6D12 White
4 Laminate or wood top color number5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Shipped knocked down.
Tip: Due to weight of steelbases, please lift or move tablesby bases only (do not lift bytops) with at least two people.
Tip: White laminate tops mayexhibit slightly visible blackspecks inherent to the top manufacturing process.
Interport Power/ • Mho power/data module +$336 Specify with Mho power/data module.Data Module (available in clear anodized aluminum)
Dimensions Style U.S. Base PricesD W H Number Top Surface: Laminate Wood
Rectangular30" 72" 30" H35-T307230GL $2823 N.A.
30" 72" 30" H35-T307230GW N.A. $3987
30" 72" 36" H35-T307236GL $2962 N.A.
30" 72" 36" H35-T307236GW N.A. $4121
30" 72" 42" H35-T307242GL $3272 N.A.
30" 72" 42" H35-T307242GW N.A. $4266
cSpecification Information, continued on next page
Options U.S. Price Required to Specify
Specification Information
Standard Includes Required to Specify
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Available Models: Options: Available on wood, laminate and finesse covered tops only. Available in centered position only. Mho not available on Coalesse and CoalesseSpaces.models. Check grid for model availability.
• Top: laminate or wood veneer with 1⁄2" thick phenolic core• Base and frame: steel tubing and base• Glides: non-skid
1 Style number2 Laminate or wood veneer color number for top3 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4217 Brown 4218 Platinum SilvercSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood 1 Wood 2
30" 30" 18" COEL1830 $1271 $1424 $1538
36" 36" 18" COEL1836 $1476 $1659 $1798
42" 42" 18" COEL1842 $1799 $1968 $2128
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: laminate or wood veneer with 1⁄2" thick phenolic core• Base and frame: steel tubing and base• Glides: non-skid
1 Style number2 Laminate or wood veneer color number for top3 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4217 Brown 4218 Platinum SilvercSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood 1 Wood 2
30" 30" 30" COEL3030 $1327 $1480 $1598
36" 36" 30" COEL3036 $1531 $1714 $1857
42" 42" 30" COEL3042 $1850 $2023 $2186
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: laminate or wood veneer with 1⁄2" thick phenolic core• Base and frame: steel tubing and base• Glides: non-skid
1 Style number2 Laminate or wood veneer color number for top3 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4217 Brown 4218 Platinum SilvercSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood 1 Wood 2
24" 24" 36" COEL3624 $1100 $1195 $1292
30" 30" 36" COEL3630 $1362 $1518 $1641
36" 36" 36" COEL3636 $1569 $1752 $1898
42" 42" 36" COEL3642 $1884 $2057 $2223
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: laminate or wood veneer with 1⁄2" thick phenolic core• Base and frame: steel tubing and base• Glides: non-skid
1 Style number2 Laminate or wood veneer color number for top3 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4217 Brown 4218 Platinum SilvercSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood 1 Wood 2
24" 24" 42" COEL4224 $1131 $1230 $1331
30" 30" 42" COEL4230 $1395 $1548 $1672
36" 36" 42" COEL4236 $1598 $1781 $1929
42" 42" 42" COEL4242 $1981 $2154 $2328
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
• Top: laminate or wood veneer with 1⁄2" thick phenolic core• Base and frame: steel tubing and base• Glides: non-skid
1 Style number2 Laminate or wood veneer color number for top3 Base/frame finish: 4016 White Gloss 4017 Black Gloss 4217 Brown 4218 Platinum SilvercSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood 1 Wood 2
30" 72" 30" COEL303072 $2987 $3367 $3641
30" 72" 36" COEL363072 $3053 $3433 $3711
30" 72" 42" COEL423072 $3118 $3498 $3782
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse
Free StandDESIGN STEPHEN COPELAND DESIGN ORIGIN: UNITED STATES
• Height-adjustable, soft-touch: 4433 Black• Foldable/collapsible column: 4144 Black Gloss paint• Base: 6205 Black plastic
Style number
Standard Includes Required to Specify
Dimensions Style U.S. D W Number Price
221/4" 211/4" COCFS $633
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Tip: Worksurface height adjustsfrom 20"–27" and rotates 360°.
Tip: Free stand is 5" tall whenfolded/collapsed and weighs 11pounds.
Tip: Free stand can nest. Innested position each additionalunit extends 5 1/4" beyond theprevious unit.
Steelcase October 2016
Coalesse Seating/Occasional Tables Specification Guide cGinger, continued 349
Occasional Tables
Coalesse
Ginger G10/17DESIGN GEORGE SIMONS, IDSA DESIGN ORIGIN: UNITED STATES
• Frame: Solid maple and maple veneered frame• Top: - Glass: 3⁄4" thick, green tinted with white enamel bottom - Finesse: 3⁄4" thick, with Finesse applied - Wood: 3⁄4" thick, selected maple veneer - Granite: 3⁄4" thick, available in two finishes: Black Absolute or Ubatuba (Green)• Glides: Polyethylene
1 Style number2 Top color number3 Frame finish4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Granite is a natural mate-rial, and fissures, color, and veinpatterns will be inherent.
Tip: Granite tops are crated sep-arately for maximum protectionand shipped vertically.
Tip: Bases are not sold separately.
Surface TopMaterials • Contrasting wood top +$191 Specify with contrasting wood top.
Interport Power/ • Available on wood +$329 Specify with Interport and select finishData Module or Finesse tops only color number.
Style U.S. Base PricesNumber Top Surface: Finesse Glass Wood Black Absolute Ubatuba Granite Granite
Round37-18RDHF G10/17 $1576 N.A. N.A. N.A. N.A.
37-18RDHGL G10/17 N.A. $1975 N.A. N.A. N.A.
37-18RDHW G10/17 N.A. N.A. $1707 N.A. N.A.
37-18RDHGR G10/17 N.A. N.A. N.A. $2016 $2028
37-24RDHF G10/17 $1871 N.A. N.A. N.A. N.A.
37-24RDHGL G10/17 N.A. $2360 N.A. N.A. N.A.
37-24RDHW G10/17 N.A. N.A. $1961 N.A. N.A.
37-24RDHGR G10/17 N.A. N.A. N.A. $2784 $2855
37-24RDLF G10/17 $1831 N.A. N.A. N.A. N.A.
37-24RDLGL G10/17 N.A. $2310 N.A. N.A. N.A.
37-24RDLW G10/17 N.A. N.A. $1920 N.A. N.A.
37-24RDLGR G10/17 N.A. N.A. N.A. $2739 $2805
37-31RDLF G10/17 $2319 N.A. N.A. N.A. N.A.
37-31RDLGL G10/17 N.A. $2985 N.A. N.A. N.A.
37-31RDLW G10/17 N.A. N.A. $2457 N.A. N.A.
37-31RDLGR G10/17 N.A. N.A. N.A. $4628 $4818
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Overall: 18" Dia. 22"H
Overall: 24" Dia. 17"H
Overall: 31" Dia. 17"H
Tip: Contrasting wood topoption is available on woodmodels only.
Tip: Interport is not available on37-1943EL.
Tip: Interport is for center loca-tion only.cSee Interport power/datamodule, page 371.
Overall: 24" Dia. 22"H
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.G10/17 = Last order entry
October 15, 2017
Steelcase October 2016
Overall: 191⁄2" Dia. 43"W 17"H
Coalesse
Ginger continued G10/17DESIGN GEORGE SIMONS, IDSA DESIGN ORIGIN: UNITED STATES
Style U.S. Base PricesNumber Top Surface: Finesse Glass Wood Black Absolute Ubatuba Granite Granite
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Occasional Tables
Coalesse
Holy Day TablesDESIGN JEAN-MARIE MASSAURD DESIGN ORIGIN: 2003 SPAIN
Contrasting • Available on leather only No cost Specify with saddle stitching and Saddle Stitching select thread color.
Style U.S. PricesNumber Top Surface: Leather Grades: Clear Clear Green Absolute Absolute Colored Oak Walnut COL C Green Laminated/ Clear Frosted Clear Glass Frosted Appearance
• Top: wood, leather, or glass• Frame: polished trivalent chrome
1 Style number2 Wood color number for top, if selected3 Leather color number for top, if selected4 Glass color number for top, if selected5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Glass tops are 1⁄2" thick.1⁄32" chamfers are applied to topand bottom edges.
Standard Includes Required to Specify
Overall: 351⁄2"D 101⁄2"H
Overall: 271⁄2"D 18"W 14"H
Overall: 351⁄2"D 351⁄2"W 101⁄2"H
Steelcase October 2016
Coalesse
MillbraeDESIGN COALESSE DESIGN STUDIO DESIGN ORIGIN: USA
• Base: cold rolled steel, painted black gloss• Glass top: 3⁄4" thick glass• Legs: 1⁄2" x 13⁄4": black gloss• Glides
1 Style number2 Glass color number for top3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Interport power/data mod-ule is not available on Millbrae.
Standard Includes Required to Specify
Surface BaseMaterials • Brushed nickel for side table, +$587 Specify with plated metal. 30" x 30" and 36" x 36" square tables, and 20" x 54" and 30" x 60" rectangular tables • Brushed nickel for 48" x 48" +$677 Specify with plated metal. square table
Dimensions Style U.S. Base PricesD W H Number Top Surface: Clear Clear Green Absolute Clear/ Absolute Colored Green Laminated/ Clear Frosted Clear Glass Clear Green Frosted Appearance
Power Pod grommet is anoption on most table sizes.
Montara650 is a comprehen-sive collection that offers asimple, refined design that canbe customized to support arange of applications, postures,and aesthetics.
Table heights include occasional, work, and café. Café style tables are offered in counter and barheights.
Occasional Height
Work Height
Café at Counter Height
Café at Bar Height
18"H 18"H
281/2"H 281/2"H 281/2"H
36"H 36"H 36"H
42"H 42"H 42"H
The Power Pod grommet isan option for the followingtables:• 30" and larger occasionaltables• 36" and larger work and caféheight tables• Large rectangular tops havethe option of one or two grom-mets, located on table end(s).
The grommet allows for passthrough of cords and cables atthe desktop. The grommet isopen to allow for the PowerPod to be housed over orstored on the table. The grom-met inside dimension is 31⁄2"and outside dimension is511⁄16".
Cords can be routed from thegrommet in the desktop throughthe column and out the base.
Surface Table Top Materials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select color number. • Grade 2 wood veneer Prices below Specify with Grade 2 wood veneer and select color number. • Stain-to-Match No cost Specify with Stain-to-Match. cSee Coalesse Surface Materials Reference Guide.
Grommet • Power Pod grommet for 36"–60" +$52 Specify with Power Pod grommet and select diameter round and 36"W–42"W finish. square tables (center only) • Power Pod grommet for +$52 each grommet Specify with one or two Power Pod 30"D x 72"W rectangular tables grommets and select finish.
Related Products • Power Pod cPage 362
Style Dimensions U.S. Base PricesNumber D W H Laminate Wood Veneer
• Table top: - Grade 1 laminate with 3 mm flat plastic edge - Wood veneer with matching flat edge• Base: paint • Glides • Ships ready to assemble
1 Style number2 Table top diameter for round table3 Table top width for square or rectangular table4 Table top depth for square or rectangular table5 Laminate or wood veneer color number for
table top6 Plastic edge color number for laminate table
top, if selected7 Paint color number for base 8 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: One or two Power Podgrommets can be specified in30"D x72"W rectangular table.
Standard Includes Required to Specify
Occasional Tables
Tip: Power Pod grommet isavailable in 6000 Black or 6052Milk.
Application • 36"H counter height table No cost Specify with counter height. • 42"H bar height table +$26 Specify with bar height.
Surface Table Top Materials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select color number. • Grade 2 wood veneer Prices below Specify with Grade 2 wood veneer and select color number. • Stain-to-Match No cost Specify with Stain-to-Match. cSee Coalesse Surface Materials Reference Guide.
Grommet • Power Pod grommet for 36"–42" +$52 Specify with Power Pod grommet and select diameter round and 36"W–42"W finish. square tables (center only) • Power Pod grommet for +$52 each grommet Specify with one or two Power Pod 30"D x 72"W rectangular tables grommets and select finish.
Related Products • Power Pod cPage 362
Style Dimensions U.S. Base PricesNumber D W H Laminate Wood Veneer
Required Selections U.S. Price Required to Specify
Coalesse
Montara650 Café Height Tables
DESIGN COALESSE DESIGN STUDIO
cNeed help? Productdetails, page 354
• Table top: - Grade 1 laminate with 3 mm flat plastic edge - Wood veneer with matching flat edge• Base: paint • Glides • Ships ready to assemble
1 Style number2 Application (see below under Required
Selections)3 Table top diameter for round table4 Table top width for square or rectangular table5 Table top depth for square or rectangular table6 Laminate or wood veneer color number for
table top7 Plastic edge color number for laminate top, if
selected8 Paint color number for base9 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: Power Pod grommet isavailable in 6000 Black or 6052Milk.
Tip: One or two Power Podgrommets can be specified in30"D x72"W rectangular cafétable.
PasserelleDESIGN STUDIO B DESIGN ORIGIN: UNITED STATES
• Frame: Solid maple with mortise and tenon joinery for structural integrity• Glides: Polyethylene• Wood top: 1" thick, selected maple veneer• Ships ready-to-assemble
1 Style number2 Top and frame finish3 Options, if selected (see below)cSee Coalesse Surface Materials ReferenceGuide.
Tip: Bases are not sold separately.
Surface TopMaterials • Contrasting wood top +$191 Specify with contrasting wood top.
Interport Power/ • Interport Power/Data Module +$329 Specify with Interport and select finishData Module color number.
Dimensions Style U.S. Base PriceD W H Number Top Surface: Wood
24" 24" 17" 44-T242417 $ 955
24" 24" 21" 44-T242421 $1039
16" 48" 30" 44-T164830 $1430
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Interport is not available on44-T164830.cSee Interport power/datamodule, page 371.
Tip: Interport is for center location only.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Occasional Tables
Steelcase October 2016
Coalesse
Sebastopol Thought Starters
DESIGN EMILIA BORGTHORSDOTTIR DESIGN ORIGIN: UNITED STATES
Sebastopol is a unique collection of tables with endless configu-ration possibilities. It comprises of 2 shapes, each shape beingoffered in a 16” high and 22” high version. The following are just afew thought starters.
To create these table configurations use the following pieceslabeled either A or B in any combination of the two heights, or usethem on their own as a stand alone piece.
SebastopolDESIGN EMILIA BORGTHORSDOTTIR DESIGN ORIGIN: UNITED STATES
• Exterior surface: veneer grade 1, oak, or walnut• Interior surface: glossy laminate• Glides: concealed adjustable glide with non-marking nylon pad
1 Style number2 Exterior surface wood finish number3 Interior surface glossy laminate: 2001 Smoky White 2002 Studio Gray 2003 Wrought Iron 2004 Black Pearl 2005 Liberty Red4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Grommet • Grommet to accept power pod +$113 Specify with grommet and select finish color number either in milk white or black plastic.
Dimensions Style U.S. Base PricesD W H Number Top Surface: Wood Wood Grade 1 Grade 2
16" High Tables23" 27" 16" COEB2723L $1243 $1344
18" 41" 16" COEB4118L $1472 $1591
22" High Tables23" 27" 22" COEB2723H $1357 $1468
18" 41" 22" COEB4118H $1585 $1713
Specification Information
Options U.S. Price Required to Specify
Tip: Optional grommet to acceptpower pod can be specified inmilk white or black plastic.
TIp: If a grommet is specifiedwith a Power Pod and the tableis over a floor core, the floorcore outlet cannot be flush to thefloor, because the plug end willnot allow the Power Pod to sitin the grommet. If the floor coreis flush to the floor and thegrommet and Power Pod arerequired, the table either cannotbe set over the floor core, or aspecial plinth base will berequired. Consult your specialsrepresentative for additionalinformation on the plinth base.
Tables
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Steelcase October 2016
Coalesse
Sebastopol DESIGN EMILIA BORGTHORSDOTTIR DESIGN ORIGIN: UNITED STATES
• Power Pod with 6’ and three prong plug: silver bottom cradle and milk face• Accessory tray: milk• Six 15-amp power outlets• Illuminated on/off button• Surge suppressor
Dimensions Style U.S. Dia H Number Price
6" 6" COPP01 $172
Specification Information
Standard Includes Required to Specify
Style number
Tip: Leveling glides can beadjusted so that the bottom sur-face of the table can be any-where from 5⁄8" to 1” off of thefloor.
Tip: The Power Pod cord willexit out the bottom of the table.
TIp: If a grommet is specifiedwith a Power Pod and the tableis over a floor core, the floorcore outlet cannot be flush to thefloor, because the plug end willnot allow the Power Pod to sitin the grommet. If the floor coreis flush to the floor and thegrommet and Power Pod arerequired, the table either cannotbe set over the floor core, or aspecial plinth base will berequired. Consult your specialsrepresentative for additionalinformation on the plinth base.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse
Sidewalk Occasional Tables
DESIGN STUDIO B DESIGN ORIGIN: UNITED STATES
• Frames constructed of finger jointed select hard maple, reinforced with wood substrate• Legs: 4799 Platinum Metallic powder coat steel with
“Go” glides• Tops: - Laminate: 1⁄2" thick - Wood: 1⁄2" thick veneered tops and quarter cut book-matched hard maple veneer - Glass: 3⁄16" thick glass sandblasted with white on back surface• Ships ready-to assemble
1 Style number2 Laminate color number for top, if selected3 Wood color number for frame4 Wood color number for top, if selected:5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Glides • “No Go” 1⁄2" polyethylene glides No cost Specify with “No Go” glides.
Dimensions Style U.S. PricesD W H Number Top Surface: Laminate Wood Glass
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse
Soft LeafDESIGN NORMAN DIEKMAN DESIGN ORIGIN: UNITED STATES
• Frame: Unibody construction with finger jointed plywood• Upholstery: Multiple densities of laminated polyurethane• Glides: Height adjustable polyurethane leveling
1 Style number2 Fabric color number3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Tip: Glass puddle dimensionsare 17” x 19”, 1⁄2" thick.
Tip: Attached aluminum discor puddle not available on49-SFTH17B. Unattached only.
Tip: Fabrics and leathers willappear loose with comfortwrinkles when upholstered.
Tip: Due to the design and con-struction techniques of Soft Leaftables, only certain textiles canbe successfully applied, there-fore COM fabrics must be sub-mitted to Coalesse for approvalprior to order acceptance.
Surface Acrylic backer Materials • Backer for 49-SFTH21C +$ 17 Specify with acrylic backer. • Backer for 49-SFTH15A and +$ 29 Specify with acrylic backer. 49-SFTH17B cSee Coalesse Surface Materials Reference Guide.
Puddle • Brushed aluminum +$ 552 Specify with brushed aluminum puddle and indicate attached or unattached. • Glass puddle +$ 400 Specify with glass puddle and indicate attached or unattached. • 36" round glass top with +$1572 Specify with brush aluminum disc. unattached brush aluminum disc • 36" round glass top with +$1624 Specify with brush aluminum puddle. unattached brush aluminum puddle • 36" round glass top with +$1740 Specify with glass puddle. unattached glass puddle
Disc • Brushed aluminum 133⁄4" disc +$ 350 Specify with brushed aluminum disc attached or unattached.
• 1⁄2" thick top surface: - Laminate (Grade 1) with 3 mm edge band, if selected - Wood veneer (Grade 1) with matching 3 mm edge band, if selected - Corian, if selected: white only - Glass, if selected• 11⁄4" thick bottom substructure: black or milk• Base, column, and cone: 8040 Polished Matte Aluminum • Glides• Ships ready-to assemble
1 Style number with appropriate top series letter indicated in the space provided. (For example: COWO_RND30 becomes COWOLRND30 for a laminate top surface): L - Laminate top V - Wood veneer top C - Corian top G - Glass top2 Laminate, wood, or glass color number for top, if selected3 Plastic color for edge band of laminate top, if selected4 Bottom substructure: 6000 Black 6052 Milk5 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface LaminateMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select color number. Wood • Grade 2 wood veneer Prices at right Specify with Grade 2 wood veneer and select color number. • Grade 1 wedge layup veneer Prices at right Specify with Grade 1 wedge veneer layup and select color number. • Grade 2 wedge layup veneer Prices at right Specify with Grade 2 wedge veneer layup and select color number. • Stain-to-Match No cost Specify with Stain-to-Match. cSee Coalesse Surface Materials Reference Guide.
Grommet 42" and 48" round, 42" square and 451⁄2" super-square tables • One grommet (center only) +$121 Specify with one grommet. 60" round and square tables • One grommet +$121 Specify with one grommet. 60" large round and large square tables • Two grommets +$242 Specify with two grommets.
Related • Power Pod cPage 362Products • SW_1 lounge cPage 217
Options U.S. Price Required to Specify
Tip: If grommet is selected, thefinish is not selectable, it will bethe same as the substructurefinish choice.
Tip: There is no vertical wiremanager with grommet selection.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
TreesDESIGN NORMAN DIEKMAN DESIGN ORIGIN: UNITED STATES
• Embossed Wood is created under high pressure to add dimensionality and texture on all sides of the table - Interior frame is constructed from a combination of engineered lumber and hardwood veneers - Embossed hardwood veneer is applied to all vertical and slanted surfaces - Embossed wood in Natural EWNT
1 Style number2 Options, if selected (see below)
Tip: Interport power/data mod-ule is not available on Trees.
Tip: Tops come in the samewood and finish but withsmooth surface.
Standard Includes Required to Specify
Surface • Bevel high embossed wood +$71 Specify with medium brown.Materials (Model 70-C-TPM) available in medium brown EWMB • Bevel medium embossed wood +$71 Specify with medium brown. (Model 70-D-TPM) available in medium brown EWMB
1 Style number2 Powder coat color for frame: 4254 White 4256 Aluminum 3 Fabric color number for upholstery on cushions, if selected4 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to SpecifyTip: All chairs can stack fourhigh.
Tip: COM outdoor fabric mustbe an approved outdoor fabric.
Surface Acrylic backerMaterials • Indoor chair cushions +$12 Specify with acrylic backer. • Indoor chair back cushions +$10 Specify with acrylic backer. • Indoor lounge back cushions +$23 Specify with acrylic backer. • Indoor pouf and pillow +$ 6 Specify with acrylic backer. cushions cSee Coalesse Surface Materials Reference Guide.
Dimensions Style Quantity U.S. D W H Number Base Price
Chair231⁄4" 241⁄2" 31" CO2485 2 $1211
Arm Chair24" 271⁄4" 31" CO2486 2 $1389
Lounge Chair303⁄4" 37" 271⁄4" CO2487 2 $2328
cSpecification Information, continued on next page
1 Style number2 Powder coat color for base: 4254 White 4256 Aluminum3 Glass top color number for glass topcSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to SpecifyTip: Tables require glass top,specified separately.
Dimensions Style U.S. Dia. H Number Price
Round Table BasesFor use with 311⁄2" CO2493V Glass Top Below
271⁄2" 291⁄2" CO2493 $1143
For use with 471⁄4" CO2494V Glass Top Below
431⁄3" 291⁄2" CO2494 $2359
Low Table Base431⁄3 " 151⁄4" CO2496 $1772
Glass TopsFor use with 271⁄2" CO2493 Round Table Base
311⁄2" 1⁄4" CO2493V $ 441
For use with 431⁄3" CO2494 Round or CO2496 Low Table Base
471⁄4" 1⁄4" CO2494V $ 669
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Top of base: 271⁄2"DiameterBottom of base: 173⁄4"Diameter
Top of base: 431⁄3"DiameterBottom of base: 271⁄2"Diameter
Top of base: 431⁄3"DiameterBottom of base: 271⁄2"Diameter
• Frame: steel mesh and rod• Finish: 4254 White outdoor grade powder coat paint• Glides: nylon• Cushions: fabric
1 Style number2 Fabric color number for upholstery on cushions, if selected3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Tip: COM outdoor fabric mustbe an approved outdoor fabric.
Tip: Cushions must be specifiedseparately.
Tip: Side chair without armsstacks ten high. Side chair witharms stacks eight high.
cSpecification Information, continued from previous page
21"D x 241⁄4"W x 121⁄2"H
Indoor/Outdoor S
eating
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
15"D x 15"W x 3⁄4"H
Tip: Pouf has solid sheet metaltop with a photovoltaic panelfilled with five LED lights. LEDlights collect and store solarenergy to illuminate the understructure at night.
• Top: solid sheet metal• Rectangular and square table finish: 4254 White outdoor grade white powder coat paint• Legs: steel mesh and rod• Glides: nylon
1 Style number2 Options, if selected (see below)
Standard Includes Required to Specify
Surface Tiles for rectangle side tableMaterials • Blue fish tile +$939 Specify with fish tile. • White bug tile +$939 Specify with bug tile.
Dimensions Style U.S. D W H Number Base Price
Rectangular Side Table291⁄4" 531⁄4" 113⁄4" CO2589 $1836
Square Side Table471⁄4" 471⁄4" 121⁄2" CO2591 $2942
Rectangular Metal Top Table443⁄4" 1073⁄4" 291⁄2" CO2592 $4084
Rectangular Teak Top Table443⁄4" 1073⁄4" 291⁄2" CO2593 $6346
Square Tables231⁄2" 231⁄2" 291⁄2" CO2596 $1120
311⁄2" 311⁄2" 291⁄2" CO2597 $1244
Options U.S. Price Required to Specify
Specification Information
Tip: If selected, tiles ship unat-tached on the rectangular sidetable to allow for customization.Please note, tiles are whitewhen the bug design is selectedand tiles are blue when the fishdesign is selected. Six of thethirty-two tiles have either thebug or fish design, depending onwhat is specified.
Tip: CO2592 contains a steeltube across the underneath ofthe top, ensuring top stabilityand structure.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
Standard Includes Required to SpecifyTip: Legs will match framefinish.
Tip: Side chair stacks up to eighthigh.
Seat height: 18"Seat depth: 161⁄2"
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Seat height: 18"Seat depth: 161⁄2"
1 Style number2 Powder coat color number for frame: 7234 Textured Matte Black 7271 Textured Matte White 7272 Textured Matte Blue 7273 Textured Matte Green 7274 Textured Matte Red
• Painted table: single sheet of molded steel• Painted steel legs: painted to match table• Finish: outdoor grade powder coat paint• Glides: nylon• Ships ready to assemble
Standard Includes Required to SpecifyTip: Legs will be painted tomatch table.
Dimensions Style U.S. Dia. H Number Price
Small Round Table311⁄2" 291⁄2" CO2518 $ 850
Large Round Table46" 291⁄2" CO2520 $1316
Dimensions Style U.S. D W H Number Price
Square Table341⁄4" 341⁄4" 291⁄2" CO2519 $1200
Specification Information
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse
Emu Advanced Collection Emu Pattern – Tables
DESIGN ARIK LEVY
1 Style number2 Powder coat color number for table: 7234 Textured Matte Black 7271 Textured Matte White 7272 Textured Matte Blue 7273 Textured Matte Green 7274 Textured Matte Red
Tip: COM outdoor fabric mustbe an approved outdoor fabric.
Tip: Cushions must be specifiedseparately.
• Frame: hot-dipped steel rod, hand welded• Finish: 4254 White outdoor grade powder coat paint• Seat: steel tube and ironed sheet metal• Glides: PVC• Cushions: fabric
1 Style number2 Fabric color number for upholstery on cushions, if selected3 Options, if selected (see below)cSee Coalesse Surface Materials Reference Guide.
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Indoor chair seat and pouf +$ 8 Specify with acrylic backer. cushions • Chair seat and back indoor +$12 Specify with acrylic backer. cushions cSee Coalesse Surface Materials Reference Guide.
Dimensions Style U.S. D W H Number Base Price
Midback Chair231⁄2" 26" 303⁄4" CO2565MB $1284
Highback Chair24" 30" 411⁄4" CO2566HB $1518
Pouf 173⁄4" dia. 173⁄4" CO2575 $ 831
Style U.S. Base PricesNumber Fabric Grades: Leather Grades: COM 6 7 8 9 10 11 12 13 14 COL C E
• Frame: metal mesh seat, crafted using a deep drawing technique, welded to a tubular steel frame• Finish: outdoor grade powder coat paint• Glides: nylon
Standard Includes Required to Specify
Surface Acrylic backerMaterials • Backer for indoor stool +$10 Specify with acrylic backer. cushions only • Backer for indoor chair +$12 Specify with acrylic backer. cushions only • Backer for indoor lounge +$23 Specify with acrylic backer. cushions only • Backer for indoor pillow +$ 6 Specify with acrylic backer. cushions only cSee Coalesse Surface Materials Reference Guide.
Dimensions Style Quantity U.S. D W H Number Base Price
Stool201⁄2" 223⁄4" 391⁄4" CO2467 2 $1239
Chair231⁄4" 243⁄4" 32" CO2465 4 $1584
Arm Chair231⁄4" 243⁄4" 32" CO2466 4 $1736
cSpecification Information, continued on next page
Options U.S. Price Required to Specify
Specification Information
Tip: Stool and lounge stacks fourhigh. Chair stacks eight high.
Seat height: 28"
Seat height: 173⁄4"
Seat height: 173⁄4"Arm height: 26"
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
1 Style number2 Powder coat color for frame: 4251 Indian Brown 4254 White 4257 Antique Iron 7234 Textured Matte Black3 Options, if selected (see below)