SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Apr 05, 2016
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
TABLE OF CONTENTS
Page 1 - Table of contents
Page 1a1 - CMS Apollo FL Flush Stainless Steel
Page 1a2 - FL Flush SS compartment sizes
Page 2a - CMS Apollo FL Recessed Series
Page 3b - FL Floorbox compartment sizes
Page 4c - FL Floorbox dimensions
Page 5c - CLR Accessory plates
Page 6 - CLR Accessory plates
Page 7a - CLR Accessory plates
Page 7a1 - Apollo FB Floorbox
Page 7a2 - Apollo FB2 & FB4
Page 7a3 - Apollo Accessory plates
Page 7a5 - Apollo Accessory plates
Page 8 - Cablelink Rapide Extra Introduction
Page 9 - Cableink Rapide Extra
Page 10 - Cablelink Rapide Extra dimensions
Page 13 - GES2 Floorbox
Page 14b - GESRM2 Floorbox
Page 15 - Cablelink 1 Floorbox
Page 15a1 - BR1 Floorbox
Page 15a2 - Madera Floorbox
Page 16a - Stainless Steel Floorbox
Page 16a1 - Rhino Floorbox
Page 16a2 - Rhino dimensions
Page 16a4 - Apollo FL Stainless Steel Floorbox
Page 16a.5 - Apollo FL Stainless Steel FLSS2 &
FLSS4
Page 16b5 - Titan Floorbox Intro
Page 16a6 - Titan FTA2 Access box
Page 16a7 - Titan FT2 Inscreed box
Page 16a8 - Titan FT4 Inscreed box
Page 16a9 - Titan FT4 Inscreed Accessories
1
Page 16a10 - Titan FTA4 Access box
Page 16a11 - Titan FTA4 Accessories
Page 16b12 - Titan FTA4 Low profile Inscreed box
Page 16a13 - Titan Low profile Inscreed Accessories
Page 16b14 - Titan FTA4 Low profile Access box
Page 16a15 - Titan Low profile Access Accessories
Page 17a2 - CMS Stainless Steel 3 Phase Floorbox
Page 17a - G1 & G2 Outlet
Page 18 - Access Grommet
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
1a1
CMS APOLLO FL FLUSH STAINLESS STEEL SERIES
The CMS Apollo FL Flush stainless steel series floorbox
has been designed for maximum flexibility to suit client
requirements, with standard off the shelf component
catering for most applications. Incorporated in the
bevelled lid is an easy grab lifting handle and cable exit
cap.
The carcass and mounting plate are constructed from
powder coated steel producing a long lasting robust unit.
Behind our communication mounting plates is a 50mm
cavity catering for popular AV and communication
requirements.
SOME OF THE FEATURES INCLUDE:
- Available in 2, 3 & 4 compartment
- Easy grab lifting handle
- Multiple cable entry points
- Bevelled lid with a thickness of 4mm
- Increased capacity for AV & Data
2 compartment shown with flush mount lid
ORDERING INFORMATION
PART NO DESCRIPTION
FLF2080SS 2 Compartment stainless steel floor box with flush mount lid - 80mm deep
FLF2090SS 2 Compartment stainless steel floor box with flush mount lid - 90mm deep
FLF2120SS 2 Compartment stainless steel floor box with flush mount lid - 120mm deep
FLF3080SS 3 Compartment stainless steel floor box with flush mount lid - 80mm deep
FLF3090SS 3 Compartment stainless steel floor box with flush mount lid - 90mm deep
FLF3120SS 3 Compartment stainless steel floor box with flush mount lid - 120mm deep
FLF4080SS 4 Compartment stainless steel floor box with flush mount lid - 80mm deep
FLF4090SS 4 Compartment stainless steel floor box with flush mount lid - 90mm deep
FLF4120SS 4 Compartment stainless steel floor box with flush mount lid - 120mm deep
REFER TO PAGES 5,6 & 7 FOR MOUNTING PLATES
21.1.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
1a2
2 COMPARTMENT
DEPTH PART NO
80mm FLF2080SS
90mm FLF2090SS
120mm FLF2120SS
4 COMPARTMENT
DEPTH PART NO
80mm FLF4080SS
90mm FLF4090SS
120mm FLF4120SS
CUT OUT SIZES:
- 2 COMPARTMENT - 210mm x 210mm
- 3 COMPARTMENT - 261mm x 210mm
- 4 COMPARTMENT - 345mm x 225mm
Multiple cable
entry points
Easy grab
lifting handle
3 COMPARTMENT
DEPTH PART NO
80mm FLF3080SS
90mm FLF3090SS
120mm FLF3120SS
210mm 210mm
345mm 225mm
261mm 210mm
21.1.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
CMS APOLLO FL RECESSED SERIES
2a
The CMS Apollo FL Series floorbox has been designed for
maximum flexibility to suit client requirements, with
standard off the shelf component catering for most
applications. Incorporated in the lid is an easy grab lifting
handle and an oversized cable exit cap. The oversize exit
cap ensures all cords exiting are contained within.
A bevelled edge carpet frame and 7mm carpet recessed lid
are moulded from hard wearing, high impact poly
carbonate / ABS blend polyimide with a 2.5mm galvanised
steel plate fitted into the lid, making this one of the
toughest boxes yet. The carcass and mounting plate are
constructed from powder coated steel, producing a long
lasting robust unit.
Multi directional lid comes as standard in soft grey with
other colours available on request (MOQ apply). Behind our
communication mounting plates is a 50mm cavity catering
for popular AV and communication requirements.
SOME OF THE FEATURES INCLUDE:
- Available in 2, 3 & 4 compartment
- Extra large cable exit flap
- Easy grab lifting handle
- Multiple cable entry points
- Increased capacity for AV & Data
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
3b
2 COMPARTMENT
DEPTH PART NO
80mm FL2080**
90mm FL2090**
120mm FL2120**
4 COMPARTMENT
DEPTH PART NO
80mm FL4080**
90mm FL4090**
120mm FL4120**
CUT OUT SIZES:
- 2 COMPARTMENT - 210mm x 210mm
- 3 COMPARTMENT - 261mm x 210mm
- 4 COMPARTMENT - 345mm x 225mm
Notes: **Denotes lid colour in GY (grey) or BK (black)
3 COMPARTMENT
DEPTH PART NO
80mm FL3080**
90mm FL3090**
120mm FL3120**
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
4c
2 COMPARTMENT
PART NO OVERALL DEPTH
FL2080** 80mm
FL2090** 90mm
FL2120** 120mm
4 COMPARTMENT
PART NO OVERALL DEPTH
FL4080** 80mm
FL4090** 90mm
FL4120** 120mm
Extra large cable exit flab
Large easy grab Lifting handle
Multiple cable
entry points
3 COMPARTMENT
PART NO OVERALL DEPTH
FL3080** 80mm
FL3090** 90mm
FL3120** 120mm
2 Compartment
3 Compartment
4 Compartment
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATION
PART NO. DESCRIPTION
CL11371 M/Plate F/W 3 x 10amp Switched GPOs (only for 120mm deep box)
ORDERING INFORMATION
PART NO. DESCRIPTION
CL21201 M/Plate F/W 4 x Switch mech. bezels
ORDERING INFORMATION
PART NO. DESCRIPTION
CL21206 M/Plate F/W 6 x Switch mech. bezels
ORDERING INFORMATION
PART NO. DESCRIPTION
CL21208 M/Plate F/W 8 x Switch mech. bezels
ORDERING INFORMATION
PART NO. DESCRIPTION
CL18261 M/Plate f/W 2 x Auto switched GPOs
5c
ORDERING INFORMATION
PART NO. DESCRIPTION
CL11261 M/Plate f/W 2 x 10amp switched GPOs
ORDERING INFORMATION
PART NO. DESCRIPTION
CL18371 Mounting plate fitted with 3 x 50mm 10amp Auto Switched GPO - Hardwired
20.1.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATION
PART NO. DESCRIPTION
CL31201 M/Plate angle blank
ORDERING INFORMATION
PART NO. DESCRIPTION
CL11261 –R M/Plate F/W 2 x Round earth pin GPOs
6
ORDERING INFORMATION
PART NO. DESCRIPTION
CLTAG/1 M/Plate C/W 1 x TAG softwiring coupler
ORDERING INFORMATION
PART NO. DESCRIPTION
CL30201 M/Plate flat blank
ORDERING INFORMATION
PART NO. DESCRIPTION
CL24504BB M/Plate F/W 4 x Switch angled mech. bezels
ORDERING INFORMATION
PART NO. DESCRIPTION
CLTAG/2 M/Plate C/W 2 x TAG softwiring coupler
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
ORDERING INFORMATION
PART NO. DESCRIPTION
CL181206 Mounting plate fitted with 3 x 50mm dual data plates - SW18
Series
ORDERING INFORMATION
PART NO. DESCRIPTION
CL18AV Mounting plate with provision for SW18 Series AV outlets
7a
ORDERING INFORMATION
PART NO. DESCRIPTION
FBHNDL** Replacement Apollo FL Floorbox handle kit
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
CMS APOLLO FB FLOORBOX
The CMS Apollo floorbox has been designed for maximum
flexibility to suit client requirements, with standard off the
shelf component catering for most applications.
Incorporated in the lid is an easy grab lifting handle and an
oversized cable exit cap. The oversize exit cap ensures all
cords exiting are contained within.
A bevelled edge carpet frame and 7mm carpet recessed lid
are moulded in hard wearing, high impact poly carbonate /
ABS blend polyimide with a 2.5mm galvanised steel plate
fitted into the lid makes this one of the toughest boxes yet.
The carcass and mounting plate are constructed from
powder coated steel producing a long lasting robust unit.
Multi directional lid comes as standard in soft grey with
other colours available on request (MOQ apply).
Behind our communication mounting plates is a 50mm
cavity catering for popular AV and communication
requirements.
SOME OF THE FEATURES INCLUDE:
- Available in 2 & 4 compartment
- Extra large cable exit flap
- Easy grab lifting handle
- Multiple cable entry points
- Increased capacity for AV & Data
- 50mm deep data cable cavity
7a1
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
APOLLO FB2 COMPARTMENT
DEPTH PART NO
60mm FB260
80mm FB280
100mm FB210
CUT OUT SIZES:
- FB2 FLOORBOX - 210mm x 210mm
- FB4 FLOORBOX - 345mm x 225mm
APOLLO FB4 COMPARTMENT
DEPTH PART NO
60mm FB460
80mm FB480
100mm FB410
Large easy grab
lifting handle
Extra large
cable exit flab
Multiple cable
entry points
7a2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
3 x 10amp GPO shown
4 x Data shown
ORDERING INFORMATION - 2 COMPARTMENT GPO MOUNTING PLATE & STARTER SOCKETS
DESCRIPTION 60 DEEP 80 DEEP 100 DEEP
M/Plate with 2 x 10amp auto switch GPO FBP2602 FBP2802 FBP2102
M/Plate with 3 x 10amp auto switch GPO FBP2603 FBP2803 FBP2103
M/Plate with single starter FBP260ST1 FBP280ST1 FBP210ST1
M/Plate with double starter FBP260ST2 FBP280ST2 FBP210ST2
4 x 10amp GPO shown
ORDERING INFORMATION - 4 COMPARTMENT GPO MOUNTING PLATE & STARTER SOCKETS
DESCRIPTION 60 DEEP 80 DEEP 100 DEEP
M/Plate with 4 x 10amp auto switch GPO FBP4604 FBP4804 FBP4104
M/Plate with 6 x 10amp auto switch GPO FBP4606 FBP4806 FBP4106
M/Plate with single starter FBP460ST1 FBP480ST1 FBP410ST1
M/Plate with double starter FBP460ST2 FBP480ST2 FBP410ST2
M/Plate with single starter & 2 x 10amp auto switch GPO FBP460SP FBP480SP FBP410SP
ORDERING INFORMATION - 2 COMPARTMENT DATA MOUNTING PLATE & AV
DESCRIPTION 60 DEEP 80 DEEP 100 DEEP
M/Plate with provision for 2 x Data FBD2602 FBD2802 FBD2102
M/Plate with provision for 4 x Data FBD2604 FBD2804 FBD2104
M/Plate with provision for 6 x Data ——————- FBD2806 FBD2106
Blank mounting plate 150mm x 41.5mm opening ——————- FBD280150 FBD210150
2 Comp AAP Plate - provision only FBD260AA FBD280AA FBD210AA
7a3
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
4 x Data shown
ORDERING INFORMATION - 4 COMPARTMENT DATA MOUNTING PLATE & AV
DESCRIPTION 60 DEEP 80 DEEP 100 DEEP
M/Plate with provision for 4 x Data FBD4604 FBD4804 FBD4104
M/Plate with provision for 6 x Data FBD4606 FBD4806 FBD4106
M/Plate with provision for 8 x Data FBD4608 FBD4808 FBD4108
Blank mounting plate 300 x 41.5mm opening ————— FBD480300 FBD410300
4 Comp dual AAP plate - provision only FBD460AA FBD480AA FBD410AA
PRECONFIGURED ORDERING INFORMATION
PART NO. DESCRIPTION
FB26034 FB2 Module floorbox c/w: 3 x auto switch GPO, 4 x Data cut-outs for 60mm
FB28034 FB2 Module floorbox c/w: 3 x auto switch GPO, 4 x Data cut-outs for 80mm
FB21034 FB2 Module floorbox c/w: 3 x auto switch GPO, 4 x Data cut-outs for 100mm
FB46066 FB4 Module floorbox c/w: 6 x auto switch GPO, 6 x Data cut-outs for 60mm
FB48046 FB4 Module floorbox c/w: 4 x auto switch GPO, 6 x Data cut-outs for 80mm
FB41046 FB4 Module floorbox c/w: 4 x auto switch GPO, 6 x Data cut-outs for 100mm
FB48068 FB4 Module floorbox c/w: 6 x auto switch GPO, 8 x Data cut-outs for 80mm
FB41068 FB4 Module floorbox c/w: 6 x auto switch GPO, 8 x Data cut-outs for 100mm
FBHNDL** Replacement Apollo FB floorbox handle kit
** Denotes black (BK) or grey (GY)
7a5
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
Ackermann revolutionised the floor box concept with the introduction of the first fast
fit floor box, the Cablelink Rapide. Further development has resulted in the Cablelink
Rapide Extra, Ackermann’s new fast fit floorbox that offers you more.
CABLELINK RAPIDE EXTRA
Retaining all the popular features of Cablelink Rapide,
Rapide Extra has been engineered for easier and faster
installation, maximum life span flexibility and offers a host of new
features and options.
The design allows for the complete box and/or individual
modules to be easily installed and removed. The robust one
piece, one size moulded frame, offers the option of future
proofing with the easy addition of a fourth module at a later date.
New optional extras such as cable retainers, cable dump and
lockable lid make Rapide Extra the ultimate cost effective
interface between underfloor services and the office environment.
RAPIDE INSTALLATION & REMOVAL
Still one of the fastest floor boxes to install, Rapide Extra’s
no tools fixing and unique patented spring loaded blade
mechanism significantly reduces installation time and
costs.
As well as being one of the fastest and easiest floorboxes
on the market to install, the unique design of Rapide Extra
means that it is also one of the fastest and easiest to
remove from the floor.
For example, during initial installation, the floor box may
have to be removed from the floor tile a number of times to
accommodate various trades and services work. This,
together with maintenance and relocation to accommodate
changes in office layout, is made simpler by Rapide Extra’s
unique features. The one piece floor box frame and
patented spring loaded blade system means there is no
unscrewing, dismantling or levering required. Simply retract
the blades and lift the complete box from the floor, saving
time and reducing costs.
REVERSABLE LID
Rapide Extra’s quick release, reversible lid mechanism
ensures easy removal. Its reversibility accommodates
cables from any direction, thus removing excessive strain
on incoming cables.
TAMPER PROOF LOCK
Rapide Extra comes with additional features such as a
lockable lid option. This tamper proof feature provides
extra security against the accidental disconnection of
services or unauthorised use.
CABLE DUMP
This new innovation from Ackermann enables excess
cabling to be stored safely away within the floor box.
8
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
RAPIDE EXTRA 4 COMPARTMENT
PART NO
CRX4080GRY 4 x Compartment floor outlet - 80mm deep
CRX4090GRY 4 x Compartment floor outlet - 90mm deep
CRX4120GRY 4 x Compartment floor outlet - 120mm deep
CRXKEY Key for floorbox
CABLELINK RAPIDE EXTRA
FUTURE PROOFING
Rapide Extra not only provides flexibility in its installation,
but also in its capacity to accommodate future expansion.
The ever increasing proliferation in data requirements or the
integration of special power needs an option
for increased capacity within the cable management
infrastructure. Rapide Extra’s one size floor box frame offers
an expansion capacity, from a 3 module to a 4 module box,
at a significantly reduced cost compared to traditional
methods.
Included with every 3 module box is a moulded expansion
plate, which provides neat closure until the fourth module
position is required. When needed simply remove the
moulded expansion plate and install a new module.
ADD AND REMOVE MODULES WITHOUT REMOVING BOX
Ackermann’s original innovation of floor boxes constructed
from individual modules has set the standard for ease of
installation and flexibility. Ackermann’s latest development
in modularity enables modules to be installed and removed
without dismantling or removing the floor box frame.
Rapide Extra’s unique method of fixing the individual
modules to the floor box frame affords the option of lift up
or drop-down installation and removal of individual modules
whilst the floor box frame remains in the floor. This unique
feature means that installation, retro fitting and the removal
of modules can be carried out with minimum disruption and at
greatly reduced cost.
CABLE RETAINERS
Cable retainers are also available as an option. Supplied pre
-fitted or as retro fit items depending on the floor box build,
cable retainers assist in the routing of incoming cables
through the cord caps and reduce the risk of damage to the
cables.
SOME OF THE FEATURES INCLUDE:
- No need to install a larger floorbox
- No need to disrupt or move existing services
- Built in future proofing at no extra cost
- Lockable lid option for added security
- Cable dump reduces trip hazards
- Cable retainers for tidier and safer work environment
9a
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
2 COMPARTMENT
PART NO OVERALL DEPTH PLUG TOP
CLEARANCE (B)
CRX4080GRY 80mm 25.5
CRX4090GRY 90mm 35.5
CRX4120GRY 120mm 65.5
CABLELINK RAPIDE EXTRA DIMENSIONS
(80, 90 or
120mm)
CUT OUT SIZES:
- 4 COMPARTMENT - 342mm x 222mm
10
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
GES2 SERIES
The GES 2 is a brilliantly simple concept in floor outlet
from CMS. Small and discreet when you need it to be, or
the centre of attention in stainless steel when you want it
to be.
This floor outlet is suited to every floor type, the standard
model coming complete with a recessed lid to allow the
easy installation of a matching floor covering. The GES 2
will provide two GPOs wherever they are required.
This box has two compartments and will accept any two
of the mounting plates listed in the below.
TECHNICAL SPECIFICATIONS:
- CARPET RECESS - 5mm
- TILE FRAME - Polymide
- ACCESSORY BOX - Plated steel, 4 x 25mm knockouts
CUT OUT DIMENSIONS:
- 2 COMPARTMENT - 188mm x 112mm x 70mm
- STAINLESS STEEL - 188mm x 112mm x 90mm
ORDERING INFORMATION
PART NO. DESCRIPTION
GES2 BLK 2 Compartment floor outlet (black) - 70mm deep
GES2GRY 2 Compartment floor outlet (grey) - 70mm deep
GES2/SS 2 Compartment floor outlet (stainless steel) - 90mm deep
GES/PWR M/Plate F/W 1 x 10 Amp GPO
GES/BEZ M/Plate F/W 2 x switch mech. bezels
GES/PWR-R M/Plate F/W round earth pin GPO
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
13
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
GESRM2 SERIES
A simple solution just got clever. The GESRM2 floor outlet box is
designed for use in screed, cavity and raised floor applications.
When not in use it is dust and water resistant to IP65. It is ideal for
P.V.C and tiled internal floors that need wet cleaning. The unit can
be fitted with one general purpose power outlet, two RJ45 data /
telephone outlets, or one auto switched power outlet and two
RJ45 data / telephone outlets. The GESRM2 is also available as a
directional spotlight.
The IP65 rated lid section is manufactured from die cast zinc
non-slip surfacing. Surfaces available are: stock nickel and aged
brass.
The undercarriage is manufactured from 1.2mm galvanized steel.
TECHNICAL SPECIFICATIONS:
- PROTECTION - IP65 when closed
CUT OUT DIMENSIONS:
- GESRM2 - 115mm
- DEPTH - 100mm
ORDERING INFORMATION
PART NO. DESCRIPTION
GESRM2A/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim & 1 x 10amp GPO
GESRM2B/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim, 1 x 10amp GPO and provision for 2 x
data / telephone
GESRM2D/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim and provision for 2 x data / telephone
GESRM2A/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim & 1 x 10amp GPO
GESRM2B/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim, 1 x 10amp GPO and provision for 2 x da-
ta / telephone
GESRM2D/CT/BR IP65 rated Floorbox with non-slip brass finish, carpet trim and provision for 2 x data / telephone
GESRM2A/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid & 1 x 10amp GPO
GESRM2B/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid, 1 x 10amp GPO and provision for 2 x
data / telephone
GESRM2D/BE/NI IP65 rated Floorbox with non-slip nickel finish, butted edge lid and provision for 2 x data / telephone
GESRM2A/BE/BR IP65 rated Floorbox with non-slip brass finish, butted edge lid & 1 x 10amp GPO
GESRM2B/BE/BR IP65 rated Floorbox with non-slip brass finish, butted edge lid, 1 x 10amp GPO and provision for 2 x
data / telephone
GESRM2F/CT/NI IP65 rated Floorbox with non-slip nickel finish, carpet trim & 1 x 20amp GPO
GESRM/2APWR Single switched GPO mounting plate for A style box outlet included
GESRM/2BPWR Single auto switched GPO mounting plate for B style box outlet included
DBLV/5E** Leviton data jack - Cat 5E
DBLV/6** Leviton data jack - Cat 6
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
14b 15.7.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
CABLELINK 1
ORDERING INFORMATION
PART NO. DESCRIPTION
CL1075BLK Single application floor outlet complete with lid and entry holes
CL49094A CL1 mounting plate fitted with 1 x 10amp GPO
CL49094A15 CL1 mounting plate fitted with 1 x 15amp GPO
CL49094A20 CL1 mounting plate fitted with 1 x 20amp GPO
CL49094AR CL1 mounting plate fitted with round earth pin
CL49094B CL1 mounting plate - blank
CL49094C CL1 mounting plate fitted with 1 x switch mech. bezel
CL49094D CL1 mounting plate fitted with 2 x switch mech. bezel
30247A CL1 Non– slip nickel flat lid (optional)
30247B CL1 Brass non-slip flat lid (optional)
30721AA CL1 tool for flat stainless steel and brass lids
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
The CL1 is where it all began, the original floor outlet from CMS. A
unique compact circular floor outlet box. The CL1 is designed for
use in all types of floors. It is ideally suited for providing a single
power, data or telephone outlet where and when required. It is
supplied standard with a hinged, robust plastic dome lid. The
options of a non-slip Nickel finish, non-slip brass and plastic flush
floor lids are available for when the floor outlet is not in use. The
original simple solution from CMS.
HINGED DOME LID
Manufactured from polyamide. An extremely tough fire retardant
material. OUTLET MOUNTING PLATE
CMS outlet (10, 15 or 20 Amp) can be easily mounted for power
requirements. For data and telephone a bezel is inserted in the
mounting plate, so RJ series connectors and TV points can easily
snap in. OUTLET BODY
Zinc alloy pressure die-cast body with internal and external
threads which allows different mounting plates and accessories
to be installed, as well as providing simple means of installation. CONDUIT MOUNTING BOX
Available so the outlet can be installed in a preformed concrete
slab. CUT OUT DIMENSIONS:
- CABLELINK 1 - 92mm
- DEPTH - 75mm
15
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
BR1 SERIES
The BR1 floor outlet box is designed for use in screed,
polished concrete floor applications. When not in use it is
dust and water resistant up to IP65. The unit is fitted with
one general purpose power outlet, one RJ45 data / tele-
phone outlet.
This unit comes as standard with a brass lid for when the
box is not in use & a dome lid for when in use. It is also
height adjustable and is ideal in wet clean floor applications.
The IP65 rated lid section is manufactured from brass,
whilst the undercarriage is manufactured from 1.2mm
plated steel.
TECHNICAL SPECIFICATIONS:
- PROTECTION - IP65 when closed
CUT OUT DIMENSIONS:
- BRI - 122mm
- DEPTH - 84mm
ORDERING INFORMATION
PART NO. DESCRIPTION
BR1
IP65 rated butted edge floorbox standard with brass lid, plastic dome lid , 1 x 10amp GPO and
provision for 1 x data / telephone
DBLV/5E** Leviton data jack - Cat 5E
DBLV/6** Leviton data jack - Cat 6
30721AA Tool for flat stainless steel and brass lids
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
Dome lid shown
IP65 Brass lid shown
Note: When in use the dome lid is required for correct cable exit & socket outlet protection
15a1
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
MADERA FLOORBOX SERIES
The stylish new Madera floor outlet box is designed for use
in timber floor applications. The unit is fitted with one gen-
eral purpose power outlet complete with dust cover.
The Madera floor outlet is well suited for the high end
residential or commercial applications when concealing a
single outlet in a timber floor.
This unit comes with an option of a flanged brass lid or a
butted edge version if a flush finish is desirable.
CUT OUT DIMENSIONS:
- BUTTED EDGE - 105mm Hole saws
- BUTTED EDGE REBATE: 111mm hole saw 2mm deep
- BUTTED EDGE DEPTH - 106mm
- FLANGED EDGE - 105mm Hole saws
- FLANGED EDGE DEPTH - 105.9mm
Flush lid shown
Flanged brass lid shown
15a2
Note: Outlet to be covered at all times.
ORDERING INFORMATION
PART NO. DESCRIPTION
MD01CT Madera floorbox with flanged lid c/w 1 x 10amp auto switched GPO
MD01BE Madera floorbox with butted edge lid for flush mount c/w 1 x 10amp auto switched GPO
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
STAINLESS STEEL FLOOR OUTLETS
ORDERING INFORMATION
PART NO. DESCRIPTION
CL2075SS 2 Compartment floor outlet
CL4075SS 4 Compartment floor outlet
CL11261-65 Mounting plate with 2 x GPOs
CL21201-65 Mounting plate with 4x switch mech. bezels
CL11371-65 Mounting plate with 3 x 10amp GPOs
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
The stainless steel floor outlets are easily installed into a
concrete or timber floor. The clever design allows
adjustment of the lid for height after being cast in screed.
The undercarriage is made from 1.2mm galvanized steel and has
4 x 20mm knockouts for conduit.
SOME OF THE FEATURES INCLUDE:
- This floorbox is available as a 2 or 4 compartment
- 4 x 20mm knockouts for conduit
- Each compartment can accommodate 2 x GPO or 4 x Data/Voice
- Stainless steel finish
CUT OUT DIMENSIONS:
- 2 COMPARTMENT - 207mm x 207mm x 75mm
CUT OUT DIMENSIONS:
- 4 COMPARTMENT - 364mm x 208mm x 75mm
CL4075SS
CL2075SS
16a
CL11261-65 Shown
CL11371-65 Shown
CL21201-65 Shown
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
RHINO FLOORBOX
16a1
The Rhino stainless steel floor outlet boxes are easily
installed into a concrete or timber floor.
The Rhino floor box flush mount lid is manufactured from
5mm stainless steel and is suitable in applications requiring
additional strength to take the weight of a vehicle.
SOME OF THE FEATURES INCLUDE:
- Multiple knockouts for conduit
- Stainless steel finish
- 3 Standard depths 80mm, 90mm or 120mm
CUT OUT SIZES:
- RF2 COMPARTMENT - 210mm x 210mm
- RF4 COMPARTMENT - 345mm x 225mm
ORDERING INFORMATION
PART NO DESCRIPTION
RF2080SS 2 Compartment stainless steel floor box with flush mounted lid - 80mm deep
RF2090SS 2 Compartment stainless steel floor box with flush mounted lid - 90mm deep
RF2120SS 2 Compartment stainless steel floor box with flush mounted lid - 120mm deep
RF4080SS 4 Compartment stainless steel floor box with flush mounted lid - 80mm deep
RF4090SS 4 Compartment stainless steel floor box with flush mounted lid - 90mm deep
RF4120SS 4 Compartment stainless steel floor box with flush mounted lid - 120mm deep
REFER TO PAGES 5,6 & 7 FOR MOUNTING PLATES
2 Compartment shown
4 Compartment shown
NOTE:
- Contact CMS technical sales team to confirm suitability of this product for a specific application
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a2
2 COMPARTMENT
PART NO OVERALL DEPTH
RF2080SS 80mm
RF2090SS 90mm
RF2120SS 120mm
4 COMPARTMENT
PART NO OVERALL DEPTH
RF4080SS 80mm
RF4090SS 90mm
RF4120SS 120mm
Extra large cable exit flab
Multiple cable
entry points
CUT OUT SIZES:
- 2 COMPARTMENT - 210mm x 210mm
- 4 COMPARTMENT - 345mm x 225mm
210 210
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a4
CMS APOLLO FL STAINLESS STEEL SERIES
4 compartment shown with Power, Data & 20amp starter socket
ORDERING INFORMATION
PART NO DESCRIPTION
FL2080SS 2 Compartment stainless steel floor box with recessed d - 80mm deep
FL2090SS 2 Compartment stainless steel floor box with recessed lid - 90mm deep
FL2120SS 2 Compartment stainless steel floor box with recessed lid - 120mm deep
FL3080SS 3 Compartment stainless steel floor box with recessed lid - 80mm deep
FL3090SS 3 Compartment stainless steel floor box with recessed lid - 90mm deep
FL3120SS 3 Compartment stainless steel floor box with recessed lid - 120mm deep
FL4080SS 4 Compartment stainless steel floor box with recessed lid - 80mm deep
FL4090SS 4 Compartment stainless steel floor box with recessed lid - 90mm deep
FL4120SS 4 Compartment stainless steel floor box with recessed lid - 120mm deep
REFER TO PAGES 5,6 & 7 FOR MOUNTING PLATES
The CMS Apollo FL stainless steel series floorbox has been
designed for maximum flexibility to suit client requirements,
with standard off the shelf component catering for most
applications. Incorporated in the lid is an easy grab lifting
handle and cable exit cap.
Incorporated into the stainless steel lid and carpet frame is
a 12mm recess to accommodate the floor finish. The
carcass and mounting plate are constructed from powder
coated steel producing a long lasting robust unit.
Behind our communication mounting plates is a 50mm
cavity catering for popular AV and communication
requirements.
SOME OF THE FEATURES INCLUDE:
- Available in 2, 3 & 4 compartment
- Easy grab lifting handle
- Multiple cable entry points
- Increased capacity for AV & Data
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a.5
2 COMPARTMENT
DEPTH PART NO
80mm FL2080SS
90mm FL2090SS
120mm FL2120SS
4 COMPARTMENT
DEPTH PART NO
80mm FL4080SS
90mm FL4090SS
120mm FL4120SS
CUT OUT SIZES: - 2 COMPARTMENT - 210mm x 210mm
- 3 COMPARTMENT - 261mm x 210mm
- 4 COMPARTMENT - 345mm x 225mm
3a
Multiple cable
entry points
Easy grab lifting handle
3 COMPARTMENT
DEPTH PART NO
80mm FL3080SS
90mm FL3090SS
120mm FL3120SS
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16b5
CMS TITAN FLOORBOX
Lid closed Lid with optional umbilical Screed box
Access floorbox shown with AV plates fitted
The CMS Titan floorbox has been designed for maximum
flexibility incorporating power, data and AV to suit client
requirements.
The Titan floorbox provides services directly to workstations,
conference, meeting, and training rooms suitable for concrete
or computer access floor applications.
The Titan floorbox has interchangeable face plate to
incorporate power and specific brands of data and audio visual
components.
The lid incorporates an easy grab lifting handle and an
oversized cable exit cap.
A bevelled edge carpet frame and 7mm carpet/tile recessed
lid is moulded in hard wearing, high impact, polycarbonate /
ABS blend Polymide with a 2.5mm steel plate fitted for extra
strength.
SOME OF THE FEATURES INCLUDE:
- Available in two sizes
- Interchangeable plates
- Branded AV solutions (Extron, Kramer)
- Easy grab lifting handle
- High impact lid with 7mm recess
- Concrete or Access floor applications
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a6
1
FTA2 ACCESS BOX - EXPLODED VIEW
2
3
5
7
8
9
10
11
12
13
6
14
SERIESSERIESSERIESSERIES CUT OUTCUT OUTCUT OUTCUT OUT
FTA2 210mm x 210mm
4
ACCESSORY ORDERING INFORMATION
ID No. PART NO. DESCRIPTION
1 FTA2 FTA2 Access floorbox, lid & undercarriage assembly - 95mm deep
2 FT2LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
3 FTD4 Adapter plate to suit 2 x 50mm Dual tile (provision 4 x data)
4 FTD2 Adapter plate to suit 2 x 50mm Single tile (provision 2 x data)
5 FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black
6 FTAPH2BK Power plate f/w 2 auto switched GPO with back box
7 FTSCD SC Duplex plate
8 FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules
9 FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double
10 FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules
11 FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules
12 FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad
13 FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules
14 FTBP Blank plate
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a7
1
FT2 INSCREED BOX - EXPLODED VIEW
2
3
5
7
8
9
10
11
12
13
6
15
SERIES CUT OUT
FT2CH 332mm x 332mm
4
ACCESSORY ORDERING INFORMATION
ID No. PART NO. DESCRIPTION
1 FT2CH Titan FT2 Screed box 100mm deep
2 FT2TP Titan FT2 Screed Floorbox, lid & undercarriage assembly 95mm deep
3 FTD4 Adapter plate to suit 2 x 50mm Dual tile (provision 4 x data)
4 FTD2 Adapter plate to suit 2 x 50mm Dual tile (provision 2 x data)
5 FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black
6 FTP2BK Titan power plate f/w 2 auto switched GPO - black
7 FTSCD SC Duplex plate
8 FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules
9 FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double
10 FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules
11 FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules
12 FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad
13 FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules
14 FTBP Blank plate
15 FT2LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a8
FT4 INSCREED BOX - EXPLODED VIEW
ID NO. PART NO. ID NO. PART NO.
1 FT4CH - Titan FB4 Screed Box 100mm deep to suit FT4TP
12 FTKRSV - Kramer adapter plate to suit 'SV' xx Modules
2 FT4TP - FB4 floorbox, lid & undercarriage assembly 13 FTEXMAAP4 - MAAP Extron adapter plate quad
3 FTBP - Blank plate 14 FTKRW4 - Kramer adapter plate to suit 'W' xx quad
modules
4 FTP2 - Power plate f/w 2 auto switched GPO 15 FT1802L3HBK - Dual auto switched power module c/w
L3HBK
5 FTTAGBK - single starter full plate c/w rewireable socket
- black
16 FT1804L3HBK - Quad auto switched power module c/w
L3HBK
6 FTD4 - Adapter plate to suit 2 x 50mm Dual tiles (4 x
data)
17 FTTAG+BK - Starter plate c/w rewireable socket (with
opening to suit adjacent cut-out) - black
7 FTD2 - Adapter plate to suit 2 x 50mm Single tiles (2 x
data)
18 FTKRWD2 - Kramer adapter plate to suit 'W' xx Double
modules
8 SW18C2 - 50mm dual data tile 19 FTEXMAAPD2 - Titan Floor box MAAP Extron adapter
plate double
9 SW18B1 - 25mm single data tile 20 FTSCD - SC Duplex plate
10 SW18B1SM - 25mm single plate to suit Systimax data tile 21 FT4LID-UMB - Floorbox lid with galvanised steel lid insert
and umbilical grommet
11 FTEXAAP - AAP Extron adapter plate to suit 1 x Double
or 2 x single modules
21
17
5
18
19
20
6
5
3
7
4
2
1
15
16
13
14
12
11
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a9
FT4 INSCREED ACCESSORY ORDERING INFORMATION
PART NO. DESCRIPTION
FT4CH Titan FT4 Screed Box 100mm deep to suit FT4TP
FT4TP FT4 floorbox, lid & undercarriage assembly
FT4LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
FTP2BK Titan power plate f/w 2 auto switched GPO - black
FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules
FTEXMAAP4 Titan Floor box MAAP Extron adapter plate s quad
FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double
FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules
FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules
FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules
FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black
FTTAGBK Titan Floor box single starter full plate c/w rewireable socket - black
FTTAG2BK Titan Floor box dual starter full plate c/w rewireable sockets - black
FTD4 Adapter plate to suit 2 x 50mm Dual tiles (4 x data)
FTD2 Adapter plate to suit 2 x 50mm Single tiles (2 x data)
FTBP Blank plate
FTSCD SC Duplex plate
FTD2C1BK Double data kit (to suit whole Titan range)
FTD4C1BK Quad data kit (to suit whole Titan range)
FTD6C2CBK 6 Way data kit (to suit whole Titan range)
FTD8C2BK 8 Way data kit (to suit whole Titan range)
FT1802L3HBK Dual auto switched power module including L3HBK rewireable coupler to suit FT4TP series
FT1804L3HBK Quad auto switched power module including L3HBK rewireable coupler to suit FT4TP SERIES
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a10
ID NO. PART NO. ID NO. PART NO.
1 FTA4 Access floorbox, lid & undercarriage assembly -
95mm deep 11 FTKRSV - Kramer adapter plate to suit 'SV' xx Modules
2 FTBP - Blank plate 12 FTEXMAAP4 - MAAP Extron adapter plate quad
3 FTAPH2BK - Power plate f/w 2 auto switched GPO with
back box
13 FTKRW4 - Kramer adapter plate to suit 'W' xx quad
modules
4 FTTAGBK - single starter full plate c/w rewireable socket
- black
14 FTA1802L3BK - Dual auto switched power module c/w
L3.20 rewire
5 FTD4 - Adapter plate to suit 2 x 50mm Dual tiles (4 x
data)
15 FTA1804L3BK - Quad auto switched power module c/w
L3.20 rewire
6 FTD2 - Adapter plate to suit 2 x 50mm Single tiles (2 x
data)
16 FTTAG+BK - FTTAG+BK - Starter plate c/w rewireable
socket (with opening to suit adjacent cut-out) - black
7 SW18C2 - 50mm dual data tile 17 FTKRWD2 - Kramer adapter plate to suit 'W' xx Double
modules
8 SW18B1 - 25mm single data tile 18 FTEXMAAPD2 - Titan Floor box MAAP Extron adapter plate
double
9 SW18B1SM - 25mm single plate to suit Systimax data
tile
19 FTSCD - SC Duplex plate
10 FTEXAAP - AAP Extron adapter plate to suit 1 x Double
or 2 x single modules
20 FT4LID-UMB - Floorbox lid with galvanised steel lid insert
and umbilical grommet
FTA4 ACCESS BOX - EXPLODED VIEW
SERIES CUT OUT
FTA4 345mm x 225mm
13
14
16
15
17
18
19
4
12
11
2
10
6
5
4
3
1
20
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a11
FTA4 ACCESS BOX ACCESSORY ORDERING INFORMATION
PART NO. DESCRIPTION
FTA4 Titan FB4 Access floorbox lid & undercarriage assembly (cut out 345mm x 225mm) 95mm deep
FT4LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
FTAPH2BK Titan power plate f/w 2 auto switched GPO with back box
FTEXAAP Titan Floor box AAP Extron adapter plate to suit 1 x double or 2 x single modules
FTEXMAAP4 Titan Floor box MAAP Extron adapter plate quad
FTEXMAAPD2 Titan Floor box MAAP Extron adapter plate double
FTKRSV Titan Floor box Kramer adapter plate to suit 'SV' xx modules
FTKRWD2 Titan Floor box Kramer adapter plate to suit 'W' xx Double modules
FTKRW4 Titan Floor box Kramer adapter plate to suit 'W' xx Quad modules
FTTAG+BK Titan Floor box Starter plate c/w rewireable socket (with opening to suit adjacent cut-out) - black
FTTAGBK Titan Floor box single starter full plate c/w rewireable socket - black
FTTAG2BK Titan Floor box dual starter full plate c/w rewireable sockets - black
FTD4 Adapter plate to suit 2 x 50mm Dual tiles (4 x data)
FTD2 Adapter plate to suit 2 x 50mm Single tiles (2 x data)
FTBP Blank plate
FTSCD SC Duplex plate
FTD2C1BK Double data kit (to suit whole Titan range)
FTD4C1BK Quad data kit (to suit whole Titan range)
FTD6C2CBK 6 Way data kit (to suit whole Titan range)
FTD8C2BK 8 Way data kit (to suit whole Titan range)
FTA1802L3BK Double GPO kit including L3.20rewireable coupler to suit FTA4 series
FTA1804L3BK Quad GPO kit including L3.20 rewireable coupler to suit FTA4 series
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16b12
21
ID NO. PART NO. ID NO. PART NO.
1 FT4CH80 - Titan FB4 Screed Box low profile c/w segre-
gation & cover plate - 80mm deep to suit FT4TP 13 FT1804L3HBK - Quad auto switched power module c/
w L3HBK
2 FT4TP75 - FB4 floorbox, lid & undercarriage - 75mm
deep
14 FTLPEX2AAP - AAP Extron plate to suit 2 x doubles or
4 x single modules
3 FT4LID-UMB - Floorbox lid with galvanised steel lid
insert and umbilical grommet
15 SW18C2 - 50mm dual data tile
4 FTLPTAGBK - Low profile starter full plate c/w single
rewireable socket
16 SW18B1 - 25mm single data tile
5 FTLPKRWD - Kramer Adaptor Plate to suit Double mod-
ules
17 SW18BH - 25mm Data tile f/w HDMI connector
6 FTLPKRW2 ---- Kramer adapter plate to suit ‘W’ xx double
modules
18 SW18BUSB - 25mm Data tile f/w 2 x USB ports
7 FTLPSCD - SC Duplex plate adaptor plate to suit 75mm
deep box
19 SW18B1SM - 25mm single tile to suit Systimax data
8 FTLPKRSV - Kramer adapter plate to suit SV301 or
SV306
20 SW18CV - 50mm tile f/w VGA H/D DB15 socket &
screw termination
9 FTLPEXMAAPD - Titan floorbox MAAP Extron adapter
plate double
21 FTDLP4BK - Titan low profile data plate f/w 2 x 50mm
double data provision tiles - black
10 FTLPEXMAAP2 - Titan floorbox MAAP Extron plate sin-
gle
22 FTDLP2BK - Titan low profile data plate f/w 2 x 50mm
single data provision tiles - black
11 FTLPEXAAP - AAP Extron adapter plate to suit 1 x
double or 2 x singles
23 FTLPBPBK- Titan low profile blank plate f/w 2 x 50mm
blank data tiles - black
12 FTLPD3/25BK - 100mm blank plate ————————————————————————————————————————————————————————————————————————————————————————————————
FT4 LOW PROFILE INSCREED BOX - EXPLODED VIEW
SERIES CUT OUT
FTL4CH 432mm x 332mm
13
14
19
18
17
16
15
20
22
23
1
4
5
6
7
8
9
10
11
12
3
2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a13
LOW PROFILE INSCREED ACCESSORY ORDERING INFORMATION
PART NO. DESCRIPTION
FT4CH80 Titan FT4 Screed Box low profile c/w segregation & cover plate - 80mm deep to suit FT4TP
FT4TP75 FT4 floorbox, lid & undercarriage - 75mm deep
FT4LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
FTLPEXMAAPD Titan floorbox MAAP Extron adapter plate double
FTLPEX2AAP AAP Extron plate to suit 2 x Doubles or 4 x single modules
FTLPEXMAAPD2 Titan Floor box MAAP Extron adapter plate single
FTLPEXAAP AAP Extron adapter plate to suit 1 x Double or 2 x Singles
FTLPKRW2 Kramer adapter plate to suit ‘W’ xx double modules
FTLPKRWD Kramer adaptor plate to suit Double modules
FTLPKRSV Kramer adapter plate to suit SV301 or SV306
FTLPTAGBK Low profile starter full plate c/w single rewireable socket
FTLPD3/25BK 100mm Blank Plate
FTLPSCD SC Duplex plate adaptor plate to suit 75mm deep box
FTD2C1BK Double data kit (to suit whole Titan range)
FTLPBPBK Titan low profile blank plate f/w 2 x 50mm blank data tiles - black
FTDLP2BK Titan low profile data plate f/w 2 x 50mm single data provision tiles - black
FTDLP4BK Titan low profile data pate f/w 2 x 50mm double data provision tiles - black
FTD4C1BK Quad data kit (to suit whole Titan range)
FTD6C2CBK 6 Way data kit (to suit whole Titan range)
FTD8C2BK 8 Way data kit (to suit whole Titan range)
FT1802L3HBK Double GPO kit including L3H rewireable coupler to suit FT4TP series
FT1804L3HBK Quad GPO kit including L3H rewireable coupler to suit FT4TP SERIES
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16b14
FTA4 LOW PROFILE ACCESS BOX - EXPLODED VIEW
14
13
12
15
17 18
ID NO. PART NO. ID NO. PART NO.
1 FTA4GY75 - FB4 floorbox, lid & undercarriage - 75mm deep 12 FTLPSW1804L3BK - Quad auto switched power
module c/w L3.20
2 FT4LID-UMB - Floorbox lid with galvanised steel lid insert
and umbilical grommet
13 FTLPEX2AAP - AAP Extron plate to suit 2 x Doubles
or 4 x single modules
3 FTLPTAGBK - Low profile starter full plate c/w single
rewireable socket
14 SW18C2 - 50mm dual data tile
4 FTLPKRWD - Kramer Adaptor Plate to suit Double modules 15 SW18B1 - 25mm single data tile
5 FTLPKRW2 ---- Kramer adapter plate to suit ‘W’ xx double
modules
16 SW18BH - 25mm Data tile f/w HDMI connector
6 FTLPSCD - SC Duplex plate adaptor plate to suit 75mm
deep box
17 SW18BUSB - 25mm Data tile f/w 2 x USB ports
7 FTLPKRSV - Kramer adapter plate to suit SV301 or SV306 18 SW18B1SM - 25mm Single tile to suit Systimax data
8 FTLPEXMAAPD - Titan floorbox MAAP Extron adapter plate
double
19 SW18CV - 50mm tile f/w VGA H/D DB15 socket &
screw termination
9 FTLPEXMAAP2 - Titan floorbox MAAP Extron plate single 20 FTLPBPBK- Titan low profile blank plate f/w 2 x
50mm blank data tiles - black
10 FTLPEXAAP - AAP Extron adapter plate to suit 1 x Double or
2 x singles
21 FTDLP2BK - Titan low profile data plate f/w 2 x 50mm
single data provision tiles - black
11 FTLPD3/25BK - 100mm blank plate 22 FTDLP4BK - Titan low profile data plate f/w 2 x 50mm
double data provision tiles - black
SERIES CUT OUT
FTA4GY75 345mm x 225mm
16
19
20
21 22
1
3
4
5
6
9
7
8
10
11
2
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
16a15
LOW PROFILE ACCESS ACCESSORY ORDERING INFORMATION
PART NO. DESCRIPTION
FTA4GY75 FB4 floorbox, lid & undercarriage - 75mm deep
FT4LID-UMB Floorbox lid with galvanised steel lid insert and umbilical grommet
FTLPEXMAAPD Titan floorbox MAAP Extron adapter plate double
FTLPEX2AAP AAP Extron plate to suit 2 x Doubles or 4 x single modules
FTLPEXMAAPD2 Titan Floor box MAAP Extron adapter plate single
FTLPKRW2 Kramer adapter plate to suit ‘W’ xx double modules
FTLPKRWD Kramer adaptor plate to suit Double modules
FTLPEXAAP AAP Extron adapter plate to suit 1 x Double or 2 x Singles
FTLPKRSV Kramer adapter plate to suit SV301 or SV306
FTLPTAGBK Low profile starter full plate c/w single rewireable socket
FTLPD3/25BK 100mm Blank plate
FTLPSCD SC Duplex plate adaptor plate to suit 75mm deep box
FTLPBPBK Titan low profile blank plate f/w 2 x 50mm blank data tiles - black
FTDLP2BK Titan low profile data plate f/w 2 x 50mm single data provision tiles- black
FTDLP4BK Titan low profile data pate f/w 2 x 50mm double data provision tiles - black
FTD2C1BK Double data kit (to suit whole Titan range)
FTD4C1BK Quad data kit (to suit whole Titan range)
FTD6C2CBK 6 Way data kit (to suit whole Titan range)
FTD8C2BK 8 Way data kit (to suit whole Titan range)
FT1802L3BK Double GPO kit including L3.20 rewireable coupler to suit FT4TP series
FT1804L3BK Quad GPO kit including L3.20 rewireable coupler to suit FT4TP SERIES
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
17a2
CMS Stainless Steel 3 Phase Floorbox
The CMS 3 Phase floorbox has been designed for
applications that require 3 phase outlets mounted in
the floor.
The flush mount lid is manufactured from 5mm
stainless steel and comes with an easy grab lifting
handle and cable exit cap.
The carcass and mounting plates are constructed
from powder coated steel producing a long lasting
robust unit.
Available in 120mm deep only.
SOME OF THE FEATURES INCLUDE:
- Available space for 3 x Single GPO and 32amp outlet
- Easy grab lifting handle
- Multiple cable entry points
- Solid 5mm stainless steel lid
- Standard depth 120mm
CUT OUT SIZES:
- 120mm deep 3 Phase - 345mm x 225mm
3 Phase 120mm deep floorbox shown with outlets
Exploded view
ORDERING INFORMATION
PART NO DESCRIPTION
RF4B5120SS CMS Stainless steel lid floorbox c/w 3 x Single hardwired GPOs and provision only for 1 x
32amp 3 Phase outlet - 120mm deep
Notes:
- Provision only for 32amp outlets. . . . Outlets by others.
17.6.14
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
G1 & G2 OUTLETS
ORDERING INFORMATION
PART NO. DESCRIPTION
G1 Floor service outlet stainless steel, 2 compartment with removable divider
G2 Floor service outlet stainless steel, 4 compartment with removable divider
G1 MINI Floor service outlet stainless steel, 2 compartment c/w CMS 2 x Single 10amp GPOs
G1-56 Floor service outlet stainless steel, 2 compartment c/w provision for 56 series outlets
C16H.1WT Single 10amp GPO switched, hardwired - White
C16H.2WT Double 10amp GPO switched, hardwired - White
CONTACT STAFF FOR ALTERNATE CONFIGURATIONS
Small and discreet the floor service outlet box is a
simple and cost effective solution in floor mounted outlets
from CMS.
With a smart stainless steel cover there is no need for cut
outs as this floor outlet screws on top of the floor or on the
work surface. The standard 2 compartment G1 and G2 is
designed for the mounting of standard outlets sold
separately.
The newly released G1-Mini comes complete with two CMS
10amp GPOs.
SOME OF THE FEATURES INCLUDE:
- Floor outlet units available in 2 or 4 compartment
- Easy installation
- Removable dividers
- 25mm cable entry holes
- Stainless steel finish
G1 OVERALL DIMENSIONS:
- 2 COMPARTMENT - 120mm x 85mm x 77mm
G2 OVERALL DIMENSIONS:
- 4 COMPARTMENT - 240mm x 85mm x 77mm
G1-MINI OVERALL DIMENSIONS:
- 2 COMPARTMENT - 58mm x 64mm x 100mm
G1-56 OVERALL DIMENSIONS:
- 2 COMPARTMENT - 100mm x 152mm x 200mm
17a
G1 Shown
SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com
SERVICE ACCESS GROMMET
ORDERING INFORMATION
PART NO. DESCRIPTION
C1000G 127mm Floor grommet
C100G 80mm Desk/Floor grommet
CMS Electracom also recognises the need for low-cost solutions
that combine innovative design and manufacturing quality.
Cableway 1000 provides an economical solution to the distribution
of power, data and voice services within raised access floors.
SOME OF THE FEATURES INCLUDE:
- Selection of 1, 2 or 3 cable exits enable varying cable
capacity
- Unique spring clips allow easy and rapid installation
- Utilising all three openings facilitates up to 6 x 20mm
conduits or a combination of 3 x 25mm and 3 x
16mm diameter conduits
CUT OUT DIMENSIONS:
- Grommet - 127mm
CABLEWAY 1000
18